From 0f2016558e4f9a8d2f9b1202064915205f4dd450 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 29 Aug 2011 16:42:13 +0300 Subject: [PATCH] mmc: sdhci-pci: add eMMC hardware reset support Implement eMMC hardware reset for Medfield. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-pci.c | 72 ++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 26c528648f3c..3b30c515cbc2 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -21,6 +21,8 @@ #include #include #include +#include +#include #include "sdhci.h" @@ -59,6 +61,7 @@ struct sdhci_pci_slot { struct sdhci_host *host; int pci_bar; + int rst_n_gpio; }; struct sdhci_pci_chip { @@ -163,12 +166,63 @@ static int mrst_hc_probe(struct sdhci_pci_chip *chip) return 0; } +/* Medfield eMMC hardware reset GPIOs */ +static int mfd_emmc0_rst_gpio = -EINVAL; +static int mfd_emmc1_rst_gpio = -EINVAL; + +static int mfd_emmc_gpio_parse(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb = (struct sfi_table_simple *)table; + struct sfi_gpio_table_entry *entry; + int i, num; + + num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry); + entry = (struct sfi_gpio_table_entry *)sb->pentry; + + for (i = 0; i < num; i++, entry++) { + if (!strncmp(entry->pin_name, "emmc0_rst", SFI_NAME_LEN)) + mfd_emmc0_rst_gpio = entry->pin_no; + else if (!strncmp(entry->pin_name, "emmc1_rst", SFI_NAME_LEN)) + mfd_emmc1_rst_gpio = entry->pin_no; + } + + return 0; +} + static int mfd_emmc_probe_slot(struct sdhci_pci_slot *slot) { + const char *name = NULL; + int gpio = -EINVAL; + + sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, mfd_emmc_gpio_parse); + + switch (slot->chip->pdev->device) { + case PCI_DEVICE_ID_INTEL_MFD_EMMC0: + gpio = mfd_emmc0_rst_gpio; + name = "eMMC0_reset"; + break; + case PCI_DEVICE_ID_INTEL_MFD_EMMC1: + gpio = mfd_emmc1_rst_gpio; + name = "eMMC1_reset"; + break; + } + + if (!gpio_request(gpio, name)) { + gpio_direction_output(gpio, 1); + slot->rst_n_gpio = gpio; + slot->host->mmc->caps |= MMC_CAP_HW_RESET; + } + slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA; + return 0; } +static void mfd_emmc_remove_slot(struct sdhci_pci_slot *slot, int dead) +{ + gpio_free(slot->rst_n_gpio); +} + static const struct sdhci_pci_fixes sdhci_intel_mrst_hc0 = { .quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT, .probe_slot = mrst_hc_probe_slot, @@ -190,6 +244,7 @@ static const struct sdhci_pci_fixes sdhci_intel_mfd_sdio = { static const struct sdhci_pci_fixes sdhci_intel_mfd_emmc = { .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, .probe_slot = mfd_emmc_probe_slot, + .remove_slot = mfd_emmc_remove_slot, }; /* O2Micro extra registers */ @@ -832,9 +887,25 @@ static int sdhci_pci_8bit_width(struct sdhci_host *host, int width) return 0; } +static void sdhci_pci_hw_reset(struct sdhci_host *host) +{ + struct sdhci_pci_slot *slot = sdhci_priv(host); + int rst_n_gpio = slot->rst_n_gpio; + + if (!gpio_is_valid(rst_n_gpio)) + return; + gpio_set_value_cansleep(rst_n_gpio, 0); + /* For eMMC, minimum is 1us but give it 10us for good measure */ + udelay(10); + gpio_set_value_cansleep(rst_n_gpio, 1); + /* For eMMC, minimum is 200us but give it 300us for good measure */ + usleep_range(300, 1000); +} + static struct sdhci_ops sdhci_pci_ops = { .enable_dma = sdhci_pci_enable_dma, .platform_8bit_width = sdhci_pci_8bit_width, + .hw_reset = sdhci_pci_hw_reset, }; /*****************************************************************************\ @@ -988,6 +1059,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( slot->chip = chip; slot->host = host; slot->pci_bar = bar; + slot->rst_n_gpio = -EINVAL; host->hw_name = "PCI"; host->ops = &sdhci_pci_ops; -- 2.30.2