From 0efdf2626676db4b30d343ff88f8461ad09130da Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 5 Dec 2006 12:03:41 -0800 Subject: [PATCH] [PATCH] sky2: sparse warnings Get rid of sparse warnings in sky2 driver because of mixed enum usage. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 18 ++++------------ drivers/net/sky2.h | 53 ++++++++++++++++++++++------------------------ 2 files changed, 29 insertions(+), 42 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index a8e096393a41..fb1d2c30c1bb 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -521,7 +521,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; /* turn off the Rx LED (LED_RX) */ - ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); + ledover &= ~PHY_M_LED_MO_RX; } if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) { @@ -544,7 +544,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) { /* turn on 100 Mbps LED (LED_LINK100) */ - ledover |= PHY_M_LED_MO_100(MO_LED_ON); + ledover |= PHY_M_LED_MO_100; } if (ledover) @@ -2930,18 +2930,8 @@ static void sky2_led(struct sky2_hw *hw, unsigned port, int on) default: gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); - gm_phy_write(hw, port, PHY_MARV_LED_OVER, - on ? PHY_M_LED_MO_DUP(MO_LED_ON) | - PHY_M_LED_MO_10(MO_LED_ON) | - PHY_M_LED_MO_100(MO_LED_ON) | - PHY_M_LED_MO_1000(MO_LED_ON) | - PHY_M_LED_MO_RX(MO_LED_ON) - : PHY_M_LED_MO_DUP(MO_LED_OFF) | - PHY_M_LED_MO_10(MO_LED_OFF) | - PHY_M_LED_MO_100(MO_LED_OFF) | - PHY_M_LED_MO_1000(MO_LED_OFF) | - PHY_M_LED_MO_RX(MO_LED_OFF)); - + gm_phy_write(hw, port, PHY_MARV_LED_OVER, + on ? PHY_M_LED_ALL : 0); } } diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index a63f6057b2ea..6ed1d47dbbd3 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -608,7 +608,7 @@ enum { PHY_ADDR_MARV = 0, }; -#define RB_ADDR(offs, queue) (B16_RAM_REGS + (queue) + (offs)) +#define RB_ADDR(offs, queue) ((u16) B16_RAM_REGS + (queue) + (offs)) enum { @@ -1061,7 +1061,7 @@ enum { PHY_M_PC_EN_DET_PLUS = 3<<8, /* Energy Detect Plus (Mode 2) */ }; -#define PHY_M_PC_MDI_XMODE(x) (((x)<<5) & PHY_M_PC_MDIX_MSK) +#define PHY_M_PC_MDI_XMODE(x) (((u16)(x)<<5) & PHY_M_PC_MDIX_MSK) enum { PHY_M_PC_MAN_MDI = 0, /* 00 = Manual MDI configuration */ @@ -1157,13 +1157,13 @@ enum { PHY_M_EC_TX_TIM_CT = 1<<1, /* RGMII Tx Timing Control */ PHY_M_EC_TRANS_DIS = 1<<0, /* Transmitter Disable (88E1111 only) */}; -#define PHY_M_EC_M_DSC(x) ((x)<<10 & PHY_M_EC_M_DSC_MSK) +#define PHY_M_EC_M_DSC(x) ((u16)(x)<<10 & PHY_M_EC_M_DSC_MSK) /* 00=1x; 01=2x; 10=3x; 11=4x */ -#define PHY_M_EC_S_DSC(x) ((x)<<8 & PHY_M_EC_S_DSC_MSK) +#define PHY_M_EC_S_DSC(x) ((u16)(x)<<8 & PHY_M_EC_S_DSC_MSK) /* 00=dis; 01=1x; 10=2x; 11=3x */ -#define PHY_M_EC_DSC_2(x) ((x)<<9 & PHY_M_EC_M_DSC_MSK2) +#define PHY_M_EC_DSC_2(x) ((u16)(x)<<9 & PHY_M_EC_M_DSC_MSK2) /* 000=1x; 001=2x; 010=3x; 011=4x */ -#define PHY_M_EC_MAC_S(x) ((x)<<4 & PHY_M_EC_MAC_S_MSK) +#define PHY_M_EC_MAC_S(x) ((u16)(x)<<4 & PHY_M_EC_MAC_S_MSK) /* 01X=0; 110=2.5; 111=25 (MHz) */ /* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ @@ -1174,7 +1174,7 @@ enum { }; /* !!! Errata in spec. (1 = disable) */ -#define PHY_M_PC_DSC(x) (((x)<<12) & PHY_M_PC_DSC_MSK) +#define PHY_M_PC_DSC(x) (((u16)(x)<<12) & PHY_M_PC_DSC_MSK) /* 100=5x; 101=6x; 110=7x; 111=8x */ enum { MAC_TX_CLK_0_MHZ = 2, @@ -1204,7 +1204,7 @@ enum { PHY_M_LEDC_TX_C_MSB = 1<<0, /* Tx Control (MSB, 88E1111 only) */ }; -#define PHY_M_LED_PULS_DUR(x) (((x)<<12) & PHY_M_LEDC_PULS_MSK) +#define PHY_M_LED_PULS_DUR(x) (((u16)(x)<<12) & PHY_M_LEDC_PULS_MSK) /***** PHY_MARV_PHY_STAT (page 3)16 bit r/w Polarity Control Reg. *****/ enum { @@ -1234,7 +1234,7 @@ enum { PULS_1300MS = 7,/* 1.3 s to 2.7 s */ }; -#define PHY_M_LED_BLINK_RT(x) (((x)<<8) & PHY_M_LEDC_BL_R_MSK) +#define PHY_M_LED_BLINK_RT(x) (((u16)(x)<<8) & PHY_M_LEDC_BL_R_MSK) enum { BLINK_42MS = 0,/* 42 ms */ @@ -1244,21 +1244,18 @@ enum { BLINK_670MS = 4,/* 670 ms */ }; -/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ -#define PHY_M_LED_MO_SGMII(x) ((x)<<14) /* Bit 15..14: SGMII AN Timer */ - /* Bit 13..12: reserved */ -#define PHY_M_LED_MO_DUP(x) ((x)<<10) /* Bit 11..10: Duplex */ -#define PHY_M_LED_MO_10(x) ((x)<<8) /* Bit 9.. 8: Link 10 */ -#define PHY_M_LED_MO_100(x) ((x)<<6) /* Bit 7.. 6: Link 100 */ -#define PHY_M_LED_MO_1000(x) ((x)<<4) /* Bit 5.. 4: Link 1000 */ -#define PHY_M_LED_MO_RX(x) ((x)<<2) /* Bit 3.. 2: Rx */ -#define PHY_M_LED_MO_TX(x) ((x)<<0) /* Bit 1.. 0: Tx */ - +/**** PHY_MARV_LED_OVER 16 bit r/w LED control */ enum { - MO_LED_NORM = 0, - MO_LED_BLINK = 1, - MO_LED_OFF = 2, - MO_LED_ON = 3, + PHY_M_LED_MO_DUP = 3<<10,/* Bit 11..10: Duplex */ + PHY_M_LED_MO_10 = 3<<8, /* Bit 9.. 8: Link 10 */ + PHY_M_LED_MO_100 = 3<<6, /* Bit 7.. 6: Link 100 */ + PHY_M_LED_MO_1000 = 3<<4, /* Bit 5.. 4: Link 1000 */ + PHY_M_LED_MO_RX = 3<<2, /* Bit 3.. 2: Rx */ + PHY_M_LED_MO_TX = 3<<0, /* Bit 1.. 0: Tx */ + + PHY_M_LED_ALL = PHY_M_LED_MO_DUP | PHY_M_LED_MO_10 + | PHY_M_LED_MO_100 | PHY_M_LED_MO_1000 + | PHY_M_LED_MO_RX, }; /***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ @@ -1295,9 +1292,9 @@ enum { PHY_M_FELP_LED0_MSK = 0xf, /* Bit 3.. 0: LED0 Mask (SPEED) */ }; -#define PHY_M_FELP_LED2_CTRL(x) (((x)<<8) & PHY_M_FELP_LED2_MSK) -#define PHY_M_FELP_LED1_CTRL(x) (((x)<<4) & PHY_M_FELP_LED1_MSK) -#define PHY_M_FELP_LED0_CTRL(x) (((x)<<0) & PHY_M_FELP_LED0_MSK) +#define PHY_M_FELP_LED2_CTRL(x) (((u16)(x)<<8) & PHY_M_FELP_LED2_MSK) +#define PHY_M_FELP_LED1_CTRL(x) (((u16)(x)<<4) & PHY_M_FELP_LED1_MSK) +#define PHY_M_FELP_LED0_CTRL(x) (((u16)(x)<<0) & PHY_M_FELP_LED0_MSK) enum { LED_PAR_CTRL_COLX = 0x00, @@ -1553,8 +1550,8 @@ enum { GM_SMI_CT_BUSY = 1<<3, /* Bit 3: Busy (Operation in progress) */ }; -#define GM_SMI_CT_PHY_AD(x) (((x)<<11) & GM_SMI_CT_PHY_A_MSK) -#define GM_SMI_CT_REG_AD(x) (((x)<<6) & GM_SMI_CT_REG_A_MSK) +#define GM_SMI_CT_PHY_AD(x) (((u16)(x)<<11) & GM_SMI_CT_PHY_A_MSK) +#define GM_SMI_CT_REG_AD(x) (((u16)(x)<<6) & GM_SMI_CT_REG_A_MSK) /* GM_PHY_ADDR 16 bit r/w GPHY Address Register */ enum { -- 2.30.2