From 0eba4c41ca18f8f009126dcacc647927accaa63d Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 30 Nov 2016 13:41:56 -0800 Subject: [PATCH] colibri_vf: use same NAND clock as Linux uses Currently a divider of 6 has been used, leading to following NAND Flash Controller (NFC) clocks: VF61: 27.7 MHz (166.7MHz bus clock) VF50: 22 MHz (132MHz bus clock) The NAND Flash Memory used on VF50 allows to use clock speed of up to 33MHz, while the Flash Memory of VF61 allows 50MHz. We can use the same divider of 4 on both modules to configure the maximal possible clock speeds: VF61: 41.7 MHz VF50: 33 MHz Signed-off-by: Stefan Agner --- board/toradex/colibri_vf/colibri_vf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c index 15f263c51e..7b74eb7e9d 100644 --- a/board/toradex/colibri_vf/colibri_vf.c +++ b/board/toradex/colibri_vf/colibri_vf.c @@ -428,7 +428,7 @@ static void clock_init(void) CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) | CCM_CSCDR2_NFC_EN); clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK, - CCM_CSCDR3_NFC_PRE_DIV(5)); + CCM_CSCDR3_NFC_PRE_DIV(3)); clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK, CCM_CSCMR2_RMII_CLK_SEL(2)); } -- 2.30.2