From 0d77e141331b25adf190ce30d69fe5744a69c5bd Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Fri, 7 Aug 2009 13:33:18 +0300 Subject: [PATCH] wl1251: make wl1251_set_partition bus agnostic The same partition setting code can be used for both SPI and SDIO modes, if we remove the spi-specific commands and use the more generic buffer write routines. Do that and move it to io.c since it deals with register/memory address offsets. Signed-off-by: Bob Copeland Signed-off-by: Kalle Valo Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1251_io.c | 95 +++++++++++++++++ drivers/net/wireless/wl12xx/wl1251_io.h | 15 +++ drivers/net/wireless/wl12xx/wl1251_spi.c | 124 ----------------------- drivers/net/wireless/wl12xx/wl1251_spi.h | 15 --- 4 files changed, 110 insertions(+), 139 deletions(-) diff --git a/drivers/net/wireless/wl12xx/wl1251_io.c b/drivers/net/wireless/wl12xx/wl1251_io.c index bc957858b9f6..db2cfbfb1e40 100644 --- a/drivers/net/wireless/wl12xx/wl1251_io.c +++ b/drivers/net/wireless/wl12xx/wl1251_io.c @@ -84,3 +84,98 @@ void wl1251_reg_write32(struct wl1251 *wl, int addr, u32 val) { wl1251_write32(wl, wl1251_translate_reg_addr(wl, addr), val); } + +/* Set the partitions to access the chip addresses. + * + * There are two VIRTUAL partitions (the memory partition and the + * registers partition), which are mapped to two different areas of the + * PHYSICAL (hardware) memory. This function also makes other checks to + * ensure that the partitions are not overlapping. In the diagram below, the + * memory partition comes before the register partition, but the opposite is + * also supported. + * + * PHYSICAL address + * space + * + * | | + * ...+----+--> mem_start + * VIRTUAL address ... | | + * space ... | | [PART_0] + * ... | | + * 0x00000000 <--+----+... ...+----+--> mem_start + mem_size + * | | ... | | + * |MEM | ... | | + * | | ... | | + * part_size <--+----+... | | {unused area) + * | | ... | | + * |REG | ... | | + * part_size | | ... | | + * + <--+----+... ...+----+--> reg_start + * reg_size ... | | + * ... | | [PART_1] + * ... | | + * ...+----+--> reg_start + reg_size + * | | + * + */ +void wl1251_set_partition(struct wl1251 *wl, + u32 mem_start, u32 mem_size, + u32 reg_start, u32 reg_size) +{ + struct wl1251_partition partition[2]; + + wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", + mem_start, mem_size); + wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", + reg_start, reg_size); + + /* Make sure that the two partitions together don't exceed the + * address range */ + if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) { + wl1251_debug(DEBUG_SPI, "Total size exceeds maximum virtual" + " address range. Truncating partition[0]."); + mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size; + wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", + mem_start, mem_size); + wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", + reg_start, reg_size); + } + + if ((mem_start < reg_start) && + ((mem_start + mem_size) > reg_start)) { + /* Guarantee that the memory partition doesn't overlap the + * registers partition */ + wl1251_debug(DEBUG_SPI, "End of partition[0] is " + "overlapping partition[1]. Adjusted."); + mem_size = reg_start - mem_start; + wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", + mem_start, mem_size); + wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", + reg_start, reg_size); + } else if ((reg_start < mem_start) && + ((reg_start + reg_size) > mem_start)) { + /* Guarantee that the register partition doesn't overlap the + * memory partition */ + wl1251_debug(DEBUG_SPI, "End of partition[1] is" + " overlapping partition[0]. Adjusted."); + reg_size = mem_start - reg_start; + wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", + mem_start, mem_size); + wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", + reg_start, reg_size); + } + + partition[0].start = mem_start; + partition[0].size = mem_size; + partition[1].start = reg_start; + partition[1].size = reg_size; + + wl->physical_mem_addr = mem_start; + wl->physical_reg_addr = reg_start; + + wl->virtual_mem_addr = 0; + wl->virtual_reg_addr = mem_size; + + wl->if_ops->write(wl, HW_ACCESS_PART0_SIZE_ADDR, partition, + sizeof(partition)); +} diff --git a/drivers/net/wireless/wl12xx/wl1251_io.h b/drivers/net/wireless/wl12xx/wl1251_io.h index 1fa2ab18a9e1..b89d2ac62efb 100644 --- a/drivers/net/wireless/wl12xx/wl1251_io.h +++ b/drivers/net/wireless/wl12xx/wl1251_io.h @@ -23,6 +23,17 @@ #include "wl1251.h" +#define HW_ACCESS_MEMORY_MAX_RANGE 0x1FFC0 + +#define HW_ACCESS_PART0_SIZE_ADDR 0x1FFC0 +#define HW_ACCESS_PART0_START_ADDR 0x1FFC4 +#define HW_ACCESS_PART1_SIZE_ADDR 0x1FFC8 +#define HW_ACCESS_PART1_START_ADDR 0x1FFCC + +#define HW_ACCESS_REGISTER_SIZE 4 + +#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000 + static inline u32 wl1251_read32(struct wl1251 *wl, int addr) { u32 response; @@ -46,4 +57,8 @@ void wl1251_mem_write32(struct wl1251 *wl, int addr, u32 val); u32 wl1251_reg_read32(struct wl1251 *wl, int addr); void wl1251_reg_write32(struct wl1251 *wl, int addr, u32 val); +void wl1251_set_partition(struct wl1251 *wl, + u32 part_start, u32 part_size, + u32 reg_start, u32 reg_size); + #endif diff --git a/drivers/net/wireless/wl12xx/wl1251_spi.c b/drivers/net/wireless/wl12xx/wl1251_spi.c index 61a0852b4ee7..ceb237b4e579 100644 --- a/drivers/net/wireless/wl12xx/wl1251_spi.c +++ b/drivers/net/wireless/wl12xx/wl1251_spi.c @@ -115,130 +115,6 @@ static void wl1251_spi_reset_wake(struct wl1251 *wl) wl1251_spi_init(wl); } - -/* Set the SPI partitions to access the chip addresses - * - * There are two VIRTUAL (SPI) partitions (the memory partition and the - * registers partition), which are mapped to two different areas of the - * PHYSICAL (hardware) memory. This function also makes other checks to - * ensure that the partitions are not overlapping. In the diagram below, the - * memory partition comes before the register partition, but the opposite is - * also supported. - * - * PHYSICAL address - * space - * - * | | - * ...+----+--> mem_start - * VIRTUAL address ... | | - * space ... | | [PART_0] - * ... | | - * 0x00000000 <--+----+... ...+----+--> mem_start + mem_size - * | | ... | | - * |MEM | ... | | - * | | ... | | - * part_size <--+----+... | | {unused area) - * | | ... | | - * |REG | ... | | - * part_size | | ... | | - * + <--+----+... ...+----+--> reg_start - * reg_size ... | | - * ... | | [PART_1] - * ... | | - * ...+----+--> reg_start + reg_size - * | | - * - */ -int wl1251_set_partition(struct wl1251 *wl, - u32 mem_start, u32 mem_size, - u32 reg_start, u32 reg_size) -{ - struct wl1251_partition *partition; - struct spi_transfer t; - struct spi_message m; - size_t len, cmd_len; - u32 *cmd; - int addr; - - cmd_len = sizeof(u32) + 2 * sizeof(struct wl1251_partition); - cmd = kzalloc(cmd_len, GFP_KERNEL); - if (!cmd) - return -ENOMEM; - - spi_message_init(&m); - memset(&t, 0, sizeof(t)); - - partition = (struct wl1251_partition *) (cmd + 1); - addr = HW_ACCESS_PART0_SIZE_ADDR; - len = 2 * sizeof(struct wl1251_partition); - - *cmd |= WSPI_CMD_WRITE; - *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH; - *cmd |= addr & WSPI_CMD_BYTE_ADDR; - - wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", - mem_start, mem_size); - wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", - reg_start, reg_size); - - /* Make sure that the two partitions together don't exceed the - * address range */ - if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) { - wl1251_debug(DEBUG_SPI, "Total size exceeds maximum virtual" - " address range. Truncating partition[0]."); - mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size; - wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", - mem_start, mem_size); - wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", - reg_start, reg_size); - } - - if ((mem_start < reg_start) && - ((mem_start + mem_size) > reg_start)) { - /* Guarantee that the memory partition doesn't overlap the - * registers partition */ - wl1251_debug(DEBUG_SPI, "End of partition[0] is " - "overlapping partition[1]. Adjusted."); - mem_size = reg_start - mem_start; - wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", - mem_start, mem_size); - wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", - reg_start, reg_size); - } else if ((reg_start < mem_start) && - ((reg_start + reg_size) > mem_start)) { - /* Guarantee that the register partition doesn't overlap the - * memory partition */ - wl1251_debug(DEBUG_SPI, "End of partition[1] is" - " overlapping partition[0]. Adjusted."); - reg_size = mem_start - reg_start; - wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", - mem_start, mem_size); - wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", - reg_start, reg_size); - } - - partition[0].start = mem_start; - partition[0].size = mem_size; - partition[1].start = reg_start; - partition[1].size = reg_size; - - wl->physical_mem_addr = mem_start; - wl->physical_reg_addr = reg_start; - - wl->virtual_mem_addr = 0; - wl->virtual_reg_addr = mem_size; - - t.tx_buf = cmd; - t.len = cmd_len; - spi_message_add_tail(&t, &m); - - spi_sync(wl->spi, &m); - - kfree(cmd); - - return 0; -} - static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf, size_t len) { diff --git a/drivers/net/wireless/wl12xx/wl1251_spi.h b/drivers/net/wireless/wl12xx/wl1251_spi.h index 7c6da21cb00b..cb0c228dbc6c 100644 --- a/drivers/net/wireless/wl12xx/wl1251_spi.h +++ b/drivers/net/wireless/wl12xx/wl1251_spi.h @@ -29,17 +29,6 @@ #include "wl1251_acx.h" #include "reg.h" -#define HW_ACCESS_MEMORY_MAX_RANGE 0x1FFC0 - -#define HW_ACCESS_PART0_SIZE_ADDR 0x1FFC0 -#define HW_ACCESS_PART0_START_ADDR 0x1FFC4 -#define HW_ACCESS_PART1_SIZE_ADDR 0x1FFC8 -#define HW_ACCESS_PART1_START_ADDR 0x1FFCC - -#define HW_ACCESS_REGISTER_SIZE 4 - -#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000 - #define WSPI_CMD_READ 0x40000000 #define WSPI_CMD_WRITE 0x00000000 #define WSPI_CMD_FIXED 0x20000000 @@ -69,8 +58,4 @@ ((WL1251_BUSY_WORD_LEN - 4) / sizeof(u32)) #define HW_ACCESS_WSPI_INIT_CMD_MASK 0 -int wl1251_set_partition(struct wl1251 *wl, - u32 part_start, u32 part_size, - u32 reg_start, u32 reg_size); - #endif /* __WL1251_SPI_H__ */ -- 2.30.2