From 0bc98cc6155205b615a9d29a2d54d1b839521c04 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Pali=20Roh=C3=A1r?= Date: Fri, 2 Nov 2012 20:18:11 +0100 Subject: [PATCH] power_supply: Add bq2415x charger driver MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The bq2415x charger driver is needed for example on Nokia N900 for charging battery. Driver is part of open source project to replace proprietary battery management. Signed-off-by: Pali Rohár Signed-off-by: Anton Vorontsov --- drivers/power/bq2415x_charger.c | 1644 +++++++++++++++++++++++++ include/linux/power/bq2415x_charger.h | 90 ++ 2 files changed, 1734 insertions(+) create mode 100644 drivers/power/bq2415x_charger.c create mode 100644 include/linux/power/bq2415x_charger.h diff --git a/drivers/power/bq2415x_charger.c b/drivers/power/bq2415x_charger.c new file mode 100644 index 000000000000..017b3c27f769 --- /dev/null +++ b/drivers/power/bq2415x_charger.c @@ -0,0 +1,1644 @@ +/* + bq2415x_charger.c - bq2415x charger driver + Copyright (C) 2011-2012 Pali Rohár + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +/* + Datasheets: + http://www.ti.com/product/bq24150 + http://www.ti.com/product/bq24150a + http://www.ti.com/product/bq24152 + http://www.ti.com/product/bq24153 + http://www.ti.com/product/bq24153a + http://www.ti.com/product/bq24155 +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* timeout for resetting chip timer */ +#define BQ2415X_TIMER_TIMEOUT 10 + +#define BQ2415X_REG_STATUS 0x00 +#define BQ2415X_REG_CONTROL 0x01 +#define BQ2415X_REG_VOLTAGE 0x02 +#define BQ2415X_REG_VENDER 0x03 +#define BQ2415X_REG_CURRENT 0x04 + +/* reset state for all registers */ +#define BQ2415X_RESET_STATUS BIT(6) +#define BQ2415X_RESET_CONTROL (BIT(4)|BIT(5)) +#define BQ2415X_RESET_VOLTAGE (BIT(1)|BIT(3)) +#define BQ2415X_RESET_CURRENT (BIT(0)|BIT(3)|BIT(7)) + +/* status register */ +#define BQ2415X_BIT_TMR_RST 7 +#define BQ2415X_BIT_OTG 7 +#define BQ2415X_BIT_EN_STAT 6 +#define BQ2415X_MASK_STAT (BIT(4)|BIT(5)) +#define BQ2415X_SHIFT_STAT 4 +#define BQ2415X_BIT_BOOST 3 +#define BQ2415X_MASK_FAULT (BIT(0)|BIT(1)|BIT(2)) +#define BQ2415X_SHIFT_FAULT 0 + +/* control register */ +#define BQ2415X_MASK_LIMIT (BIT(6)|BIT(7)) +#define BQ2415X_SHIFT_LIMIT 6 +#define BQ2415X_MASK_VLOWV (BIT(4)|BIT(5)) +#define BQ2415X_SHIFT_VLOWV 4 +#define BQ2415X_BIT_TE 3 +#define BQ2415X_BIT_CE 2 +#define BQ2415X_BIT_HZ_MODE 1 +#define BQ2415X_BIT_OPA_MODE 0 + +/* voltage register */ +#define BQ2415X_MASK_VO (BIT(2)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7)) +#define BQ2415X_SHIFT_VO 2 +#define BQ2415X_BIT_OTG_PL 1 +#define BQ2415X_BIT_OTG_EN 0 + +/* vender register */ +#define BQ2415X_MASK_VENDER (BIT(5)|BIT(6)|BIT(7)) +#define BQ2415X_SHIFT_VENDER 5 +#define BQ2415X_MASK_PN (BIT(3)|BIT(4)) +#define BQ2415X_SHIFT_PN 3 +#define BQ2415X_MASK_REVISION (BIT(0)|BIT(1)|BIT(2)) +#define BQ2415X_SHIFT_REVISION 0 + +/* current register */ +#define BQ2415X_MASK_RESET BIT(7) +#define BQ2415X_MASK_VI_CHRG (BIT(4)|BIT(5)|BIT(6)) +#define BQ2415X_SHIFT_VI_CHRG 4 +/* N/A BIT(3) */ +#define BQ2415X_MASK_VI_TERM (BIT(0)|BIT(1)|BIT(2)) +#define BQ2415X_SHIFT_VI_TERM 0 + + +enum bq2415x_command { + BQ2415X_TIMER_RESET, + BQ2415X_OTG_STATUS, + BQ2415X_STAT_PIN_STATUS, + BQ2415X_STAT_PIN_ENABLE, + BQ2415X_STAT_PIN_DISABLE, + BQ2415X_CHARGE_STATUS, + BQ2415X_BOOST_STATUS, + BQ2415X_FAULT_STATUS, + + BQ2415X_CHARGE_TERMINATION_STATUS, + BQ2415X_CHARGE_TERMINATION_ENABLE, + BQ2415X_CHARGE_TERMINATION_DISABLE, + BQ2415X_CHARGER_STATUS, + BQ2415X_CHARGER_ENABLE, + BQ2415X_CHARGER_DISABLE, + BQ2415X_HIGH_IMPEDANCE_STATUS, + BQ2415X_HIGH_IMPEDANCE_ENABLE, + BQ2415X_HIGH_IMPEDANCE_DISABLE, + BQ2415X_BOOST_MODE_STATUS, + BQ2415X_BOOST_MODE_ENABLE, + BQ2415X_BOOST_MODE_DISABLE, + + BQ2415X_OTG_LEVEL, + BQ2415X_OTG_ACTIVATE_HIGH, + BQ2415X_OTG_ACTIVATE_LOW, + BQ2415X_OTG_PIN_STATUS, + BQ2415X_OTG_PIN_ENABLE, + BQ2415X_OTG_PIN_DISABLE, + + BQ2415X_VENDER_CODE, + BQ2415X_PART_NUMBER, + BQ2415X_REVISION, +}; + +enum bq2415x_chip { + BQUNKNOWN, + BQ24150, + BQ24150A, + BQ24151, + BQ24151A, + BQ24152, + BQ24153, + BQ24153A, + BQ24155, + BQ24156, + BQ24156A, + BQ24158, +}; + +static char *bq2415x_chip_name[] = { + "unknown", + "bq24150", + "bq24150a", + "bq24151", + "bq24151a", + "bq24152", + "bq24153", + "bq24153a", + "bq24155", + "bq24156", + "bq24156a", + "bq24158", +}; + +struct bq2415x_device { + struct device *dev; + struct bq2415x_platform_data init_data; + struct power_supply charger; + struct delayed_work work; + enum bq2415x_mode reported_mode;/* mode reported by hook function */ + enum bq2415x_mode mode; /* current configured mode */ + enum bq2415x_chip chip; + const char *timer_error; + char *model; + char *name; + int autotimer; /* 1 - if driver automatically reset timer, 0 - not */ + int automode; /* 1 - enabled, 0 - disabled; -1 - not supported */ + int id; +}; + +/* each registered chip must have unique id */ +static DEFINE_IDR(bq2415x_id); + +static DEFINE_MUTEX(bq2415x_id_mutex); +static DEFINE_MUTEX(bq2415x_timer_mutex); +static DEFINE_MUTEX(bq2415x_i2c_mutex); + +/**** i2c read functions ****/ + +/* read value from register */ +static int bq2415x_i2c_read(struct bq2415x_device *bq, u8 reg) +{ + struct i2c_client *client = to_i2c_client(bq->dev); + struct i2c_msg msg[2]; + u8 val; + int ret; + + if (!client->adapter) + return -ENODEV; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].buf = ® + msg[0].len = sizeof(reg); + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = &val; + msg[1].len = sizeof(val); + + mutex_lock(&bq2415x_i2c_mutex); + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + mutex_unlock(&bq2415x_i2c_mutex); + + if (ret < 0) + return ret; + + return val; +} + +/* read value from register, apply mask and right shift it */ +static int bq2415x_i2c_read_mask(struct bq2415x_device *bq, u8 reg, + u8 mask, u8 shift) +{ + int ret; + + if (shift > 8) + return -EINVAL; + + ret = bq2415x_i2c_read(bq, reg); + if (ret < 0) + return ret; + else + return (ret & mask) >> shift; +} + +/* read value from register and return one specified bit */ +static int bq2415x_i2c_read_bit(struct bq2415x_device *bq, u8 reg, u8 bit) +{ + if (bit > 8) + return -EINVAL; + else + return bq2415x_i2c_read_mask(bq, reg, BIT(bit), bit); +} + +/**** i2c write functions ****/ + +/* write value to register */ +static int bq2415x_i2c_write(struct bq2415x_device *bq, u8 reg, u8 val) +{ + struct i2c_client *client = to_i2c_client(bq->dev); + struct i2c_msg msg[1]; + u8 data[2]; + int ret; + + data[0] = reg; + data[1] = val; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].buf = data; + msg[0].len = ARRAY_SIZE(data); + + mutex_lock(&bq2415x_i2c_mutex); + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + mutex_unlock(&bq2415x_i2c_mutex); + + /* i2c_transfer returns number of messages transferred */ + if (ret < 0) + return ret; + else if (ret != 1) + return -EIO; + + return 0; +} + +/* read value from register, change it with mask left shifted and write back */ +static int bq2415x_i2c_write_mask(struct bq2415x_device *bq, u8 reg, u8 val, + u8 mask, u8 shift) +{ + int ret; + + if (shift > 8) + return -EINVAL; + + ret = bq2415x_i2c_read(bq, reg); + if (ret < 0) + return ret; + + ret &= ~mask; + ret |= val << shift; + + return bq2415x_i2c_write(bq, reg, ret); +} + +/* change only one bit in register */ +static int bq2415x_i2c_write_bit(struct bq2415x_device *bq, u8 reg, + bool val, u8 bit) +{ + if (bit > 8) + return -EINVAL; + else + return bq2415x_i2c_write_mask(bq, reg, val, BIT(bit), bit); +} + +/**** global functions ****/ + +/* exec command function */ +static int bq2415x_exec_command(struct bq2415x_device *bq, + enum bq2415x_command command) +{ + int ret; + switch (command) { + case BQ2415X_TIMER_RESET: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS, + 1, BQ2415X_BIT_TMR_RST); + case BQ2415X_OTG_STATUS: + return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS, + BQ2415X_BIT_OTG); + case BQ2415X_STAT_PIN_STATUS: + return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS, + BQ2415X_BIT_EN_STAT); + case BQ2415X_STAT_PIN_ENABLE: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS, 1, + BQ2415X_BIT_EN_STAT); + case BQ2415X_STAT_PIN_DISABLE: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS, 0, + BQ2415X_BIT_EN_STAT); + case BQ2415X_CHARGE_STATUS: + return bq2415x_i2c_read_mask(bq, BQ2415X_REG_STATUS, + BQ2415X_MASK_STAT, BQ2415X_SHIFT_STAT); + case BQ2415X_BOOST_STATUS: + return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS, + BQ2415X_BIT_BOOST); + case BQ2415X_FAULT_STATUS: + return bq2415x_i2c_read_mask(bq, BQ2415X_REG_STATUS, + BQ2415X_MASK_FAULT, BQ2415X_SHIFT_FAULT); + + case BQ2415X_CHARGE_TERMINATION_STATUS: + return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL, + BQ2415X_BIT_TE); + case BQ2415X_CHARGE_TERMINATION_ENABLE: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL, + 1, BQ2415X_BIT_TE); + case BQ2415X_CHARGE_TERMINATION_DISABLE: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL, + 0, BQ2415X_BIT_TE); + case BQ2415X_CHARGER_STATUS: + ret = bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL, + BQ2415X_BIT_CE); + if (ret < 0) + return ret; + else + return ret > 0 ? 0 : 1; + case BQ2415X_CHARGER_ENABLE: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL, + 0, BQ2415X_BIT_CE); + case BQ2415X_CHARGER_DISABLE: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL, + 1, BQ2415X_BIT_CE); + case BQ2415X_HIGH_IMPEDANCE_STATUS: + return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL, + BQ2415X_BIT_HZ_MODE); + case BQ2415X_HIGH_IMPEDANCE_ENABLE: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL, + 1, BQ2415X_BIT_HZ_MODE); + case BQ2415X_HIGH_IMPEDANCE_DISABLE: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL, + 0, BQ2415X_BIT_HZ_MODE); + case BQ2415X_BOOST_MODE_STATUS: + return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL, + BQ2415X_BIT_OPA_MODE); + case BQ2415X_BOOST_MODE_ENABLE: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL, + 1, BQ2415X_BIT_OPA_MODE); + case BQ2415X_BOOST_MODE_DISABLE: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL, + 0, BQ2415X_BIT_OPA_MODE); + + case BQ2415X_OTG_LEVEL: + return bq2415x_i2c_read_bit(bq, BQ2415X_REG_VOLTAGE, + BQ2415X_BIT_OTG_PL); + case BQ2415X_OTG_ACTIVATE_HIGH: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE, + 1, BQ2415X_BIT_OTG_PL); + case BQ2415X_OTG_ACTIVATE_LOW: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE, + 0, BQ2415X_BIT_OTG_PL); + case BQ2415X_OTG_PIN_STATUS: + return bq2415x_i2c_read_bit(bq, BQ2415X_REG_VOLTAGE, + BQ2415X_BIT_OTG_EN); + case BQ2415X_OTG_PIN_ENABLE: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE, + 1, BQ2415X_BIT_OTG_EN); + case BQ2415X_OTG_PIN_DISABLE: + return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE, + 0, BQ2415X_BIT_OTG_EN); + + case BQ2415X_VENDER_CODE: + return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER, + BQ2415X_MASK_VENDER, BQ2415X_SHIFT_VENDER); + case BQ2415X_PART_NUMBER: + return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER, + BQ2415X_MASK_PN, BQ2415X_SHIFT_PN); + case BQ2415X_REVISION: + return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER, + BQ2415X_MASK_REVISION, BQ2415X_SHIFT_REVISION); + + default: + return -EINVAL; + } +} + +/* detect chip type */ +static enum bq2415x_chip bq2415x_detect_chip(struct bq2415x_device *bq) +{ + struct i2c_client *client = to_i2c_client(bq->dev); + int ret = bq2415x_exec_command(bq, BQ2415X_PART_NUMBER); + + if (ret < 0) + return ret; + + switch (client->addr) { + case 0x6b: + switch (ret) { + case 0: + if (bq->chip == BQ24151A) + return bq->chip; + else + return BQ24151; + case 1: + if (bq->chip == BQ24150A || + bq->chip == BQ24152 || + bq->chip == BQ24155) + return bq->chip; + else + return BQ24150; + case 2: + if (bq->chip == BQ24153A) + return bq->chip; + else + return BQ24153; + default: + return BQUNKNOWN; + } + break; + + case 0x6a: + switch (ret) { + case 0: + if (bq->chip == BQ24156A) + return bq->chip; + else + return BQ24156; + case 2: + return BQ24158; + default: + return BQUNKNOWN; + } + break; + } + + return BQUNKNOWN; +} + +/* detect chip revision */ +static int bq2415x_detect_revision(struct bq2415x_device *bq) +{ + int ret = bq2415x_exec_command(bq, BQ2415X_REVISION); + int chip = bq2415x_detect_chip(bq); + if (ret < 0 || chip < 0) + return -1; + + switch (chip) { + case BQ24150: + case BQ24150A: + case BQ24151: + case BQ24151A: + case BQ24152: + if (ret >= 0 && ret <= 3) + return ret; + else + return -1; + + case BQ24153: + case BQ24153A: + case BQ24156: + case BQ24156A: + case BQ24158: + if (ret == 3) + return 0; + else if (ret == 1) + return 1; + else + return -1; + + case BQ24155: + if (ret == 3) + return 3; + else + return -1; + + case BQUNKNOWN: + return -1; + } + + return -1; +} + +/* return chip vender code */ +static int bq2415x_get_vender_code(struct bq2415x_device *bq) +{ + int ret = bq2415x_exec_command(bq, BQ2415X_VENDER_CODE); + if (ret < 0) + return 0; + else /* convert to binary */ + return (ret & 0x1) + + ((ret >> 1) & 0x1) * 10 + + ((ret >> 2) & 0x1) * 100; +} + +/* reset all chip registers to default state */ +static void bq2415x_reset_chip(struct bq2415x_device *bq) +{ + bq2415x_i2c_write(bq, BQ2415X_REG_CURRENT, BQ2415X_RESET_CURRENT); + bq2415x_i2c_write(bq, BQ2415X_REG_VOLTAGE, BQ2415X_RESET_VOLTAGE); + bq2415x_i2c_write(bq, BQ2415X_REG_CONTROL, BQ2415X_RESET_CONTROL); + bq2415x_i2c_write(bq, BQ2415X_REG_STATUS, BQ2415X_RESET_STATUS); + bq->timer_error = NULL; +} + +/**** properties functions ****/ + +/* set current limit in mA */ +static int bq2415x_set_current_limit(struct bq2415x_device *bq, int mA) +{ + int val; + if (mA <= 100) + val = 0; + else if (mA <= 500) + val = 1; + else if (mA <= 800) + val = 2; + else + val = 3; + return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CONTROL, val, + BQ2415X_MASK_LIMIT, BQ2415X_SHIFT_LIMIT); +} + +/* get current limit in mA */ +static int bq2415x_get_current_limit(struct bq2415x_device *bq) +{ + int ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CONTROL, + BQ2415X_MASK_LIMIT, BQ2415X_SHIFT_LIMIT); + if (ret < 0) + return ret; + else if (ret == 0) + return 100; + else if (ret == 1) + return 500; + else if (ret == 2) + return 800; + else if (ret == 3) + return 1800; + else + return -EINVAL; +} + +/* set weak battery voltage in mV */ +static int bq2415x_set_weak_battery_voltage(struct bq2415x_device *bq, int mV) +{ + /* round to 100mV */ + int val; + if (mV <= 3400 + 50) + val = 0; + else if (mV <= 3500 + 50) + val = 1; + else if (mV <= 3600 + 50) + val = 2; + else + val = 3; + return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CONTROL, val, + BQ2415X_MASK_VLOWV, BQ2415X_SHIFT_VLOWV); +} + +/* get weak battery voltage in mV */ +static int bq2415x_get_weak_battery_voltage(struct bq2415x_device *bq) +{ + int ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CONTROL, + BQ2415X_MASK_VLOWV, BQ2415X_SHIFT_VLOWV); + if (ret < 0) + return ret; + else + return 100 * (34 + ret); +} + +/* set battery regulation voltage in mV */ +static int bq2415x_set_battery_regulation_voltage(struct bq2415x_device *bq, + int mV) +{ + int val = (mV/10 - 350) / 2; + + if (val < 0) + val = 0; + else if (val > 94) /* FIXME: Max is 94 or 122 ? Set max value ? */ + return -EINVAL; + + return bq2415x_i2c_write_mask(bq, BQ2415X_REG_VOLTAGE, val, + BQ2415X_MASK_VO, BQ2415X_SHIFT_VO); +} + +/* get battery regulation voltage in mV */ +static int bq2415x_get_battery_regulation_voltage(struct bq2415x_device *bq) +{ + int ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_VOLTAGE, + BQ2415X_MASK_VO, BQ2415X_SHIFT_VO); + if (ret < 0) + return ret; + else + return 10 * (350 + 2*ret); +} + +/* set charge current in mA (platform data must provide resistor sense) */ +static int bq2415x_set_charge_current(struct bq2415x_device *bq, int mA) +{ + int val; + if (bq->init_data.resistor_sense <= 0) + return -ENOSYS; + + val = (mA * bq->init_data.resistor_sense - 37400) / 6800; + + if (val < 0) + val = 0; + else if (val > 7) + val = 7; + + return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CURRENT, val, + BQ2415X_MASK_VI_CHRG | BQ2415X_MASK_RESET, + BQ2415X_SHIFT_VI_CHRG); +} + +/* get charge current in mA (platform data must provide resistor sense) */ +static int bq2415x_get_charge_current(struct bq2415x_device *bq) +{ + int ret; + if (bq->init_data.resistor_sense <= 0) + return -ENOSYS; + + ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CURRENT, + BQ2415X_MASK_VI_CHRG, BQ2415X_SHIFT_VI_CHRG); + if (ret < 0) + return ret; + else + return (37400 + 6800*ret) / bq->init_data.resistor_sense; +} + +/* set termination current in mA (platform data must provide resistor sense) */ +static int bq2415x_set_termination_current(struct bq2415x_device *bq, int mA) +{ + int val; + if (bq->init_data.resistor_sense <= 0) + return -ENOSYS; + + val = (mA * bq->init_data.resistor_sense - 3400) / 3400; + + if (val < 0) + val = 0; + else if (val > 7) + val = 7; + + return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CURRENT, val, + BQ2415X_MASK_VI_TERM | BQ2415X_MASK_RESET, + BQ2415X_SHIFT_VI_TERM); +} + +/* get termination current in mA (platform data must provide resistor sense) */ +static int bq2415x_get_termination_current(struct bq2415x_device *bq) +{ + int ret; + if (bq->init_data.resistor_sense <= 0) + return -ENOSYS; + + ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CURRENT, + BQ2415X_MASK_VI_TERM, BQ2415X_SHIFT_VI_TERM); + if (ret < 0) + return ret; + else + return (3400 + 3400*ret) / bq->init_data.resistor_sense; +} + +/* set default value of property */ +#define bq2415x_set_default_value(bq, prop) \ + do { \ + int ret = 0; \ + if (bq->init_data.prop != -1) \ + ret = bq2415x_set_##prop(bq, bq->init_data.prop); \ + if (ret < 0) \ + return ret; \ + } while (0) + +/* set default values of all properties */ +static int bq2415x_set_defaults(struct bq2415x_device *bq) +{ + bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_DISABLE); + bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE); + bq2415x_exec_command(bq, BQ2415X_CHARGE_TERMINATION_DISABLE); + bq2415x_set_default_value(bq, current_limit); + bq2415x_set_default_value(bq, weak_battery_voltage); + bq2415x_set_default_value(bq, battery_regulation_voltage); + if (bq->init_data.resistor_sense > 0) { + bq2415x_set_default_value(bq, charge_current); + bq2415x_set_default_value(bq, termination_current); + bq2415x_exec_command(bq, BQ2415X_CHARGE_TERMINATION_ENABLE); + } + bq2415x_exec_command(bq, BQ2415X_CHARGER_ENABLE); + return 0; +} + +/**** charger mode functions ****/ + +/* set charger mode */ +static int bq2415x_set_mode(struct bq2415x_device *bq, enum bq2415x_mode mode) +{ + int ret = 0; + int charger = 0; + int boost = 0; + + if (mode == BQ2415X_MODE_HOST_CHARGER || + mode == BQ2415X_MODE_DEDICATED_CHARGER) + charger = 1; + + if (mode == BQ2415X_MODE_BOOST) + boost = 1; + + if (!charger) + ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE); + + if (!boost) + ret = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_DISABLE); + + if (ret < 0) + return ret; + + switch (mode) { + case BQ2415X_MODE_NONE: + dev_dbg(bq->dev, "changing mode to: N/A\n"); + ret = bq2415x_set_current_limit(bq, 100); + break; + case BQ2415X_MODE_HOST_CHARGER: + dev_dbg(bq->dev, "changing mode to: Host/HUB charger\n"); + ret = bq2415x_set_current_limit(bq, 500); + break; + case BQ2415X_MODE_DEDICATED_CHARGER: + dev_dbg(bq->dev, "changing mode to: Dedicated charger\n"); + ret = bq2415x_set_current_limit(bq, 1800); + break; + case BQ2415X_MODE_BOOST: /* Boost mode */ + dev_dbg(bq->dev, "changing mode to: Boost\n"); + ret = bq2415x_set_current_limit(bq, 100); + break; + } + + if (ret < 0) + return ret; + + if (charger) + ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_ENABLE); + else if (boost) + ret = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_ENABLE); + + if (ret < 0) + return ret; + + bq2415x_set_default_value(bq, weak_battery_voltage); + bq2415x_set_default_value(bq, battery_regulation_voltage); + + bq->mode = mode; + sysfs_notify(&bq->charger.dev->kobj, NULL, "mode"); + + return 0; + +} + +/* hook function called by other driver which set reported mode */ +static void bq2415x_hook_function(enum bq2415x_mode mode, void *data) +{ + struct bq2415x_device *bq = data; + + if (!bq) + return; + + dev_dbg(bq->dev, "hook function was called\n"); + bq->reported_mode = mode; + + /* if automode is not enabled do not tell about reported_mode */ + if (bq->automode < 1) + return; + + sysfs_notify(&bq->charger.dev->kobj, NULL, "reported_mode"); + bq2415x_set_mode(bq, bq->reported_mode); + +} + +/**** timer functions ****/ + +/* enable/disable auto resetting chip timer */ +static void bq2415x_set_autotimer(struct bq2415x_device *bq, int state) +{ + mutex_lock(&bq2415x_timer_mutex); + + if (bq->autotimer == state) { + mutex_unlock(&bq2415x_timer_mutex); + return; + } + + bq->autotimer = state; + + if (state) { + schedule_delayed_work(&bq->work, BQ2415X_TIMER_TIMEOUT * HZ); + bq2415x_exec_command(bq, BQ2415X_TIMER_RESET); + bq->timer_error = NULL; + } else { + cancel_delayed_work_sync(&bq->work); + } + + mutex_unlock(&bq2415x_timer_mutex); +} + +/* called by bq2415x_timer_work on timer error */ +static void bq2415x_timer_error(struct bq2415x_device *bq, const char *msg) +{ + bq->timer_error = msg; + sysfs_notify(&bq->charger.dev->kobj, NULL, "timer"); + dev_err(bq->dev, "%s\n", msg); + if (bq->automode > 0) + bq->automode = 0; + bq2415x_set_mode(bq, BQ2415X_MODE_NONE); + bq2415x_set_autotimer(bq, 0); +} + +/* delayed work function for auto resetting chip timer */ +static void bq2415x_timer_work(struct work_struct *work) +{ + struct bq2415x_device *bq = container_of(work, struct bq2415x_device, + work.work); + int ret, error, boost; + + if (!bq->autotimer) + return; + + ret = bq2415x_exec_command(bq, BQ2415X_TIMER_RESET); + if (ret < 0) { + bq2415x_timer_error(bq, "Resetting timer failed"); + return; + } + + boost = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_STATUS); + if (boost < 0) { + bq2415x_timer_error(bq, "Unknown error"); + return; + } + + error = bq2415x_exec_command(bq, BQ2415X_FAULT_STATUS); + if (error < 0) { + bq2415x_timer_error(bq, "Unknown error"); + return; + } + + if (boost) { + switch (error) { + /* Non fatal errors, chip is OK */ + case 0: /* No error */ + break; + case 6: /* Timer expired */ + dev_err(bq->dev, "Timer expired\n"); + break; + case 3: /* Battery voltage too low */ + dev_err(bq->dev, "Battery voltage to low\n"); + break; + + /* Fatal errors, disable and reset chip */ + case 1: /* Overvoltage protection (chip fried) */ + bq2415x_timer_error(bq, + "Overvoltage protection (chip fried)"); + return; + case 2: /* Overload */ + bq2415x_timer_error(bq, "Overload"); + return; + case 4: /* Battery overvoltage protection */ + bq2415x_timer_error(bq, + "Battery overvoltage protection"); + return; + case 5: /* Thermal shutdown (too hot) */ + bq2415x_timer_error(bq, + "Thermal shutdown (too hot)"); + return; + case 7: /* N/A */ + bq2415x_timer_error(bq, "Unknown error"); + return; + } + } else { + switch (error) { + /* Non fatal errors, chip is OK */ + case 0: /* No error */ + break; + case 2: /* Sleep mode */ + dev_err(bq->dev, "Sleep mode\n"); + break; + case 3: /* Poor input source */ + dev_err(bq->dev, "Poor input source\n"); + break; + case 6: /* Timer expired */ + dev_err(bq->dev, "Timer expired\n"); + break; + case 7: /* No battery */ + dev_err(bq->dev, "No battery\n"); + break; + + /* Fatal errors, disable and reset chip */ + case 1: /* Overvoltage protection (chip fried) */ + bq2415x_timer_error(bq, + "Overvoltage protection (chip fried)"); + return; + case 4: /* Battery overvoltage protection */ + bq2415x_timer_error(bq, + "Battery overvoltage protection"); + return; + case 5: /* Thermal shutdown (too hot) */ + bq2415x_timer_error(bq, + "Thermal shutdown (too hot)"); + return; + } + } + + schedule_delayed_work(&bq->work, BQ2415X_TIMER_TIMEOUT * HZ); +} + +/**** power supply interface code ****/ + +static enum power_supply_property bq2415x_power_supply_props[] = { + /* TODO: maybe add more power supply properties */ + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_MODEL_NAME, +}; + +static int bq2415x_power_supply_get_property(struct power_supply *psy, + enum power_supply_property psp, union power_supply_propval *val) +{ + struct bq2415x_device *bq = container_of(psy, struct bq2415x_device, + charger); + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + ret = bq2415x_exec_command(bq, BQ2415X_CHARGE_STATUS); + if (ret < 0) + return ret; + else if (ret == 0) /* Ready */ + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + else if (ret == 1) /* Charge in progress */ + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (ret == 2) /* Charge done */ + val->intval = POWER_SUPPLY_STATUS_FULL; + else + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + break; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = bq->model; + break; + default: + return -EINVAL; + } + return 0; +} + +static int bq2415x_power_supply_init(struct bq2415x_device *bq) +{ + int ret; + int chip; + char revstr[8]; + + bq->charger.name = bq->name; + bq->charger.type = POWER_SUPPLY_TYPE_USB; + bq->charger.properties = bq2415x_power_supply_props; + bq->charger.num_properties = ARRAY_SIZE(bq2415x_power_supply_props); + bq->charger.get_property = bq2415x_power_supply_get_property; + + ret = bq2415x_detect_chip(bq); + if (ret < 0) + chip = BQUNKNOWN; + else + chip = ret; + + ret = bq2415x_detect_revision(bq); + if (ret < 0) + strcpy(revstr, "unknown"); + else + sprintf(revstr, "1.%d", ret); + + bq->model = kasprintf(GFP_KERNEL, + "chip %s, revision %s, vender code %.3d", + bq2415x_chip_name[chip], revstr, + bq2415x_get_vender_code(bq)); + if (!bq->model) { + dev_err(bq->dev, "failed to allocate model name\n"); + return -ENOMEM; + } + + ret = power_supply_register(bq->dev, &bq->charger); + if (ret) { + kfree(bq->model); + return ret; + } + + return 0; +} + +static void bq2415x_power_supply_exit(struct bq2415x_device *bq) +{ + bq->autotimer = 0; + if (bq->automode > 0) + bq->automode = 0; + cancel_delayed_work_sync(&bq->work); + power_supply_unregister(&bq->charger); + kfree(bq->model); +} + +/**** additional sysfs entries for power supply interface ****/ + +/* show *_status entries */ +static ssize_t bq2415x_sysfs_show_status(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq2415x_device *bq = container_of(psy, struct bq2415x_device, + charger); + enum bq2415x_command command; + int ret; + + if (strcmp(attr->attr.name, "otg_status") == 0) + command = BQ2415X_OTG_STATUS; + else if (strcmp(attr->attr.name, "charge_status") == 0) + command = BQ2415X_CHARGE_STATUS; + else if (strcmp(attr->attr.name, "boost_status") == 0) + command = BQ2415X_BOOST_STATUS; + else if (strcmp(attr->attr.name, "fault_status") == 0) + command = BQ2415X_FAULT_STATUS; + else + return -EINVAL; + + ret = bq2415x_exec_command(bq, command); + if (ret < 0) + return ret; + else + return sprintf(buf, "%d\n", ret); +} + +/* set timer entry: + auto - enable auto mode + off - disable auto mode + (other values) - reset chip timer +*/ +static ssize_t bq2415x_sysfs_set_timer(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq2415x_device *bq = container_of(psy, struct bq2415x_device, + charger); + int ret = 0; + + if (strncmp(buf, "auto", 4) == 0) + bq2415x_set_autotimer(bq, 1); + else if (strncmp(buf, "off", 3) == 0) + bq2415x_set_autotimer(bq, 0); + else + ret = bq2415x_exec_command(bq, BQ2415X_TIMER_RESET); + + if (ret < 0) + return ret; + else + return count; +} + +/* show timer entry (auto or off) */ +static ssize_t bq2415x_sysfs_show_timer(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq2415x_device *bq = container_of(psy, struct bq2415x_device, + charger); + + if (bq->timer_error) + return sprintf(buf, "%s\n", bq->timer_error); + + if (bq->autotimer) + return sprintf(buf, "auto\n"); + else + return sprintf(buf, "off\n"); +} + +/* set mode entry: + auto - if automode is supported, enable it and set mode to reported + none - disable charger and boost mode + host - charging mode for host/hub chargers (current limit 500mA) + dedicated - charging mode for dedicated chargers (unlimited current limit) + boost - disable charger and enable boost mode +*/ +static ssize_t bq2415x_sysfs_set_mode(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq2415x_device *bq = container_of(psy, struct bq2415x_device, + charger); + enum bq2415x_mode mode; + int ret = 0; + + if (strncmp(buf, "auto", 4) == 0) { + if (bq->automode < 0) + return -ENOSYS; + bq->automode = 1; + mode = bq->reported_mode; + } else if (strncmp(buf, "none", 4) == 0) { + if (bq->automode > 0) + bq->automode = 0; + mode = BQ2415X_MODE_NONE; + } else if (strncmp(buf, "host", 4) == 0) { + if (bq->automode > 0) + bq->automode = 0; + mode = BQ2415X_MODE_HOST_CHARGER; + } else if (strncmp(buf, "dedicated", 9) == 0) { + if (bq->automode > 0) + bq->automode = 0; + mode = BQ2415X_MODE_DEDICATED_CHARGER; + } else if (strncmp(buf, "boost", 5) == 0) { + if (bq->automode > 0) + bq->automode = 0; + mode = BQ2415X_MODE_BOOST; + } else if (strncmp(buf, "reset", 5) == 0) { + bq2415x_reset_chip(bq); + bq2415x_set_defaults(bq); + if (bq->automode <= 0) + return count; + bq->automode = 1; + mode = bq->reported_mode; + } else + return -EINVAL; + + ret = bq2415x_set_mode(bq, mode); + if (ret < 0) + return ret; + else + return count; +} + +/* show mode entry (auto, none, host, dedicated or boost) */ +static ssize_t bq2415x_sysfs_show_mode(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq2415x_device *bq = container_of(psy, struct bq2415x_device, + charger); + ssize_t ret = 0; + + if (bq->automode > 0) + ret += sprintf(buf+ret, "auto ("); + + switch (bq->mode) { + case BQ2415X_MODE_NONE: + ret += sprintf(buf+ret, "none"); + break; + case BQ2415X_MODE_HOST_CHARGER: + ret += sprintf(buf+ret, "host"); + break; + case BQ2415X_MODE_DEDICATED_CHARGER: + ret += sprintf(buf+ret, "dedicated"); + break; + case BQ2415X_MODE_BOOST: + ret += sprintf(buf+ret, "boost"); + break; + } + + if (bq->automode > 0) + ret += sprintf(buf+ret, ")"); + + ret += sprintf(buf+ret, "\n"); + return ret; +} + +/* show reported_mode entry (none, host, dedicated or boost) */ +static ssize_t bq2415x_sysfs_show_reported_mode(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq2415x_device *bq = container_of(psy, struct bq2415x_device, + charger); + + if (bq->automode < 0) + return -EINVAL; + + switch (bq->reported_mode) { + case BQ2415X_MODE_NONE: + return sprintf(buf, "none\n"); + case BQ2415X_MODE_HOST_CHARGER: + return sprintf(buf, "host\n"); + case BQ2415X_MODE_DEDICATED_CHARGER: + return sprintf(buf, "dedicated\n"); + case BQ2415X_MODE_BOOST: + return sprintf(buf, "boost\n"); + } + + return -EINVAL; +} + +/* directly set raw value to chip register, format: 'register value' */ +static ssize_t bq2415x_sysfs_set_registers(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq2415x_device *bq = container_of(psy, struct bq2415x_device, + charger); + ssize_t ret = 0; + unsigned int reg; + unsigned int val; + + if (sscanf(buf, "%x %x", ®, &val) != 2) + return -EINVAL; + + if (reg > 4 || val > 255) + return -EINVAL; + + ret = bq2415x_i2c_write(bq, reg, val); + if (ret < 0) + return ret; + else + return count; +} + +/* print value of chip register, format: 'register=value' */ +static ssize_t bq2415x_sysfs_print_reg(struct bq2415x_device *bq, + u8 reg, char *buf) +{ + int ret = bq2415x_i2c_read(bq, reg); + if (ret < 0) + return sprintf(buf, "%#.2x=error %d\n", reg, ret); + else + return sprintf(buf, "%#.2x=%#.2x\n", reg, ret); +} + +/* show all raw values of chip register, format per line: 'register=value' */ +static ssize_t bq2415x_sysfs_show_registers(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq2415x_device *bq = container_of(psy, struct bq2415x_device, + charger); + ssize_t ret = 0; + + ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_STATUS, buf+ret); + ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_CONTROL, buf+ret); + ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_VOLTAGE, buf+ret); + ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_VENDER, buf+ret); + ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_CURRENT, buf+ret); + return ret; +} + +/* set current and voltage limit entries (in mA or mV) */ +static ssize_t bq2415x_sysfs_set_limit(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq2415x_device *bq = container_of(psy, struct bq2415x_device, + charger); + long val; + int ret; + + if (kstrtol(buf, 10, &val) < 0) + return -EINVAL; + + if (strcmp(attr->attr.name, "current_limit") == 0) + ret = bq2415x_set_current_limit(bq, val); + else if (strcmp(attr->attr.name, "weak_battery_voltage") == 0) + ret = bq2415x_set_weak_battery_voltage(bq, val); + else if (strcmp(attr->attr.name, "battery_regulation_voltage") == 0) + ret = bq2415x_set_battery_regulation_voltage(bq, val); + else if (strcmp(attr->attr.name, "charge_current") == 0) + ret = bq2415x_set_charge_current(bq, val); + else if (strcmp(attr->attr.name, "termination_current") == 0) + ret = bq2415x_set_termination_current(bq, val); + else + return -EINVAL; + + if (ret < 0) + return ret; + else + return count; +} + +/* show current and voltage limit entries (in mA or mV) */ +static ssize_t bq2415x_sysfs_show_limit(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq2415x_device *bq = container_of(psy, struct bq2415x_device, + charger); + int ret; + + if (strcmp(attr->attr.name, "current_limit") == 0) + ret = bq2415x_get_current_limit(bq); + else if (strcmp(attr->attr.name, "weak_battery_voltage") == 0) + ret = bq2415x_get_weak_battery_voltage(bq); + else if (strcmp(attr->attr.name, "battery_regulation_voltage") == 0) + ret = bq2415x_get_battery_regulation_voltage(bq); + else if (strcmp(attr->attr.name, "charge_current") == 0) + ret = bq2415x_get_charge_current(bq); + else if (strcmp(attr->attr.name, "termination_current") == 0) + ret = bq2415x_get_termination_current(bq); + else + return -EINVAL; + + if (ret < 0) + return ret; + else + return sprintf(buf, "%d\n", ret); +} + +/* set *_enable entries */ +static ssize_t bq2415x_sysfs_set_enable(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq2415x_device *bq = container_of(psy, struct bq2415x_device, + charger); + enum bq2415x_command command; + long val; + int ret; + + if (kstrtol(buf, 10, &val) < 0) + return -EINVAL; + + if (strcmp(attr->attr.name, "charge_termination_enable") == 0) + command = val ? BQ2415X_CHARGE_TERMINATION_ENABLE : + BQ2415X_CHARGE_TERMINATION_DISABLE; + else if (strcmp(attr->attr.name, "high_impedance_enable") == 0) + command = val ? BQ2415X_HIGH_IMPEDANCE_ENABLE : + BQ2415X_HIGH_IMPEDANCE_DISABLE; + else if (strcmp(attr->attr.name, "otg_pin_enable") == 0) + command = val ? BQ2415X_OTG_PIN_ENABLE : + BQ2415X_OTG_PIN_DISABLE; + else if (strcmp(attr->attr.name, "stat_pin_enable") == 0) + command = val ? BQ2415X_STAT_PIN_ENABLE : + BQ2415X_STAT_PIN_DISABLE; + else + return -EINVAL; + + ret = bq2415x_exec_command(bq, command); + if (ret < 0) + return ret; + else + return count; +} + +/* show *_enable entries */ +static ssize_t bq2415x_sysfs_show_enable(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq2415x_device *bq = container_of(psy, struct bq2415x_device, + charger); + enum bq2415x_command command; + int ret; + + if (strcmp(attr->attr.name, "charge_termination_enable") == 0) + command = BQ2415X_CHARGE_TERMINATION_STATUS; + else if (strcmp(attr->attr.name, "high_impedance_enable") == 0) + command = BQ2415X_HIGH_IMPEDANCE_STATUS; + else if (strcmp(attr->attr.name, "otg_pin_enable") == 0) + command = BQ2415X_OTG_PIN_STATUS; + else if (strcmp(attr->attr.name, "stat_pin_enable") == 0) + command = BQ2415X_STAT_PIN_STATUS; + else + return -EINVAL; + + ret = bq2415x_exec_command(bq, command); + if (ret < 0) + return ret; + else + return sprintf(buf, "%d\n", ret); +} + +static DEVICE_ATTR(current_limit, S_IWUSR | S_IRUGO, + bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit); +static DEVICE_ATTR(weak_battery_voltage, S_IWUSR | S_IRUGO, + bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit); +static DEVICE_ATTR(battery_regulation_voltage, S_IWUSR | S_IRUGO, + bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit); +static DEVICE_ATTR(charge_current, S_IWUSR | S_IRUGO, + bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit); +static DEVICE_ATTR(termination_current, S_IWUSR | S_IRUGO, + bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit); + +static DEVICE_ATTR(charge_termination_enable, S_IWUSR | S_IRUGO, + bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable); +static DEVICE_ATTR(high_impedance_enable, S_IWUSR | S_IRUGO, + bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable); +static DEVICE_ATTR(otg_pin_enable, S_IWUSR | S_IRUGO, + bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable); +static DEVICE_ATTR(stat_pin_enable, S_IWUSR | S_IRUGO, + bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable); + +static DEVICE_ATTR(reported_mode, S_IRUGO, + bq2415x_sysfs_show_reported_mode, NULL); +static DEVICE_ATTR(mode, S_IWUSR | S_IRUGO, + bq2415x_sysfs_show_mode, bq2415x_sysfs_set_mode); +static DEVICE_ATTR(timer, S_IWUSR | S_IRUGO, + bq2415x_sysfs_show_timer, bq2415x_sysfs_set_timer); + +static DEVICE_ATTR(registers, S_IWUSR | S_IRUGO, + bq2415x_sysfs_show_registers, bq2415x_sysfs_set_registers); + +static DEVICE_ATTR(otg_status, S_IRUGO, bq2415x_sysfs_show_status, NULL); +static DEVICE_ATTR(charge_status, S_IRUGO, bq2415x_sysfs_show_status, NULL); +static DEVICE_ATTR(boost_status, S_IRUGO, bq2415x_sysfs_show_status, NULL); +static DEVICE_ATTR(fault_status, S_IRUGO, bq2415x_sysfs_show_status, NULL); + +static struct attribute *bq2415x_sysfs_attributes[] = { + &dev_attr_current_limit.attr, + &dev_attr_weak_battery_voltage.attr, + &dev_attr_battery_regulation_voltage.attr, + &dev_attr_charge_current.attr, + &dev_attr_termination_current.attr, + + &dev_attr_charge_termination_enable.attr, + &dev_attr_high_impedance_enable.attr, + &dev_attr_otg_pin_enable.attr, + &dev_attr_stat_pin_enable.attr, + + &dev_attr_reported_mode.attr, + &dev_attr_mode.attr, + &dev_attr_timer.attr, + + &dev_attr_registers.attr, + + &dev_attr_otg_status.attr, + &dev_attr_charge_status.attr, + &dev_attr_boost_status.attr, + &dev_attr_fault_status.attr, + NULL, +}; + +static const struct attribute_group bq2415x_sysfs_attr_group = { + .attrs = bq2415x_sysfs_attributes, +}; + +static int bq2415x_sysfs_init(struct bq2415x_device *bq) +{ + return sysfs_create_group(&bq->charger.dev->kobj, + &bq2415x_sysfs_attr_group); +} + +static void bq2415x_sysfs_exit(struct bq2415x_device *bq) +{ + sysfs_remove_group(&bq->charger.dev->kobj, &bq2415x_sysfs_attr_group); +} + +/* main bq2415x probe function */ +static int bq2415x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + int num; + char *name; + struct bq2415x_device *bq; + + if (!client->dev.platform_data) { + dev_err(&client->dev, "platform data not set\n"); + return -ENODEV; + } + + /* Get new ID for the new device */ + ret = idr_pre_get(&bq2415x_id, GFP_KERNEL); + if (ret == 0) + return -ENOMEM; + + mutex_lock(&bq2415x_id_mutex); + ret = idr_get_new(&bq2415x_id, client, &num); + mutex_unlock(&bq2415x_id_mutex); + + if (ret < 0) + return ret; + + name = kasprintf(GFP_KERNEL, "%s-%d", id->name, num); + if (!name) { + dev_err(&client->dev, "failed to allocate device name\n"); + ret = -ENOMEM; + goto error_1; + } + + bq = kzalloc(sizeof(*bq), GFP_KERNEL); + if (!bq) { + dev_err(&client->dev, "failed to allocate device data\n"); + ret = -ENOMEM; + goto error_2; + } + + i2c_set_clientdata(client, bq); + + bq->id = num; + bq->dev = &client->dev; + bq->chip = id->driver_data; + bq->name = name; + bq->mode = BQ2415X_MODE_NONE; + bq->reported_mode = BQ2415X_MODE_NONE; + bq->autotimer = 0; + bq->automode = 0; + + memcpy(&bq->init_data, client->dev.platform_data, + sizeof(bq->init_data)); + + bq2415x_reset_chip(bq); + + ret = bq2415x_power_supply_init(bq); + if (ret) { + dev_err(bq->dev, "failed to register power supply: %d\n", ret); + goto error_3; + } + + ret = bq2415x_sysfs_init(bq); + if (ret) { + dev_err(bq->dev, "failed to create sysfs entries: %d\n", ret); + goto error_4; + } + + ret = bq2415x_set_defaults(bq); + if (ret) { + dev_err(bq->dev, "failed to set default values: %d\n", ret); + goto error_5; + } + + if (bq->init_data.set_mode_hook) { + if (bq->init_data.set_mode_hook( + bq2415x_hook_function, bq)) { + bq->automode = 1; + bq2415x_set_mode(bq, bq->reported_mode); + dev_info(bq->dev, "automode enabled\n"); + } else { + bq->automode = -1; + dev_info(bq->dev, "automode failed\n"); + } + } else { + bq->automode = -1; + dev_info(bq->dev, "automode not supported\n"); + } + + INIT_DELAYED_WORK(&bq->work, bq2415x_timer_work); + bq2415x_set_autotimer(bq, 1); + + dev_info(bq->dev, "driver registered\n"); + return 0; + +error_5: + bq2415x_sysfs_exit(bq); +error_4: + bq2415x_power_supply_exit(bq); +error_3: + kfree(bq); +error_2: + kfree(name); +error_1: + mutex_lock(&bq2415x_id_mutex); + idr_remove(&bq2415x_id, num); + mutex_unlock(&bq2415x_id_mutex); + + return ret; +} + +/* main bq2415x remove function */ + +static int bq2415x_remove(struct i2c_client *client) +{ + struct bq2415x_device *bq = i2c_get_clientdata(client); + + if (bq->init_data.set_mode_hook) + bq->init_data.set_mode_hook(NULL, NULL); + + bq2415x_sysfs_exit(bq); + bq2415x_power_supply_exit(bq); + + bq2415x_reset_chip(bq); + + mutex_lock(&bq2415x_id_mutex); + idr_remove(&bq2415x_id, bq->id); + mutex_unlock(&bq2415x_id_mutex); + + dev_info(bq->dev, "driver unregistered\n"); + + kfree(bq->name); + kfree(bq); + + return 0; +} + +static const struct i2c_device_id bq2415x_i2c_id_table[] = { + { "bq2415x", BQUNKNOWN }, + { "bq24150", BQ24150 }, + { "bq24150a", BQ24150A }, + { "bq24151", BQ24151 }, + { "bq24151a", BQ24151A }, + { "bq24152", BQ24152 }, + { "bq24153", BQ24153 }, + { "bq24153a", BQ24153A }, + { "bq24155", BQ24155 }, + { "bq24156", BQ24156 }, + { "bq24156a", BQ24156A }, + { "bq24158", BQ24158 }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, bq2415x_i2c_id_table); + +static struct i2c_driver bq2415x_driver = { + .driver = { + .name = "bq2415x-charger", + }, + .probe = bq2415x_probe, + .remove = bq2415x_remove, + .id_table = bq2415x_i2c_id_table, +}; + +static int __init bq2415x_init(void) +{ + return i2c_add_driver(&bq2415x_driver); +} +module_init(bq2415x_init); + +static void __exit bq2415x_exit(void) +{ + i2c_del_driver(&bq2415x_driver); +} +module_exit(bq2415x_exit); + +MODULE_AUTHOR("Pali Rohár "); +MODULE_DESCRIPTION("bq2415x charger driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/power/bq2415x_charger.h b/include/linux/power/bq2415x_charger.h new file mode 100644 index 000000000000..fb6bf4d8aea8 --- /dev/null +++ b/include/linux/power/bq2415x_charger.h @@ -0,0 +1,90 @@ +/* + bq2415x_charger.h - bq2415x charger driver + Copyright (C) 2011-2012 Pali Rohár + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +#ifndef BQ2415X_CHARGER_H +#define BQ2415X_CHARGER_H + +/* + This is platform data for bq2415x chip. It contains default board voltages + and currents which can be also later configured via sysfs. If value is -1 + then default chip value (specified in datasheet) will be used. + + Value resistor_sense is needed for for configuring charge and termination + current. It it is less or equal to zero, configuring charge and termination + current will not be possible. + + Function set_mode_hook is needed for automode (setting correct current limit + when charger is connected/disconnected or setting boost mode). When is NULL, + automode function is disabled. When is not NULL, it must have this prototype: + + int (*set_mode_hook)( + void (*hook)(enum bq2415x_mode mode, void *data), + void *data) + + hook is hook function (see below) and data is pointer to driver private data + + bq2415x driver will call it as: + + platform_data->set_mode_hook(bq2415x_hook_function, bq2415x_device); + + Board/platform function set_mode_hook return non zero value when hook + function was successful registered. Platform code should call that hook + function (which get from pointer, with data) every time when charger was + connected/disconnected or require to enable boost mode. bq2415x driver then + will set correct current limit, enable/disable charger or boost mode. + + Hook function has this prototype: + + void hook(enum bq2415x_mode mode, void *data); + + mode is bq2415x mode (charger or boost) + data is pointer to driver private data (which get from set_charger_type_hook) + + When bq driver is being unloaded, it call function: + + platform_data->set_mode_hook(NULL, NULL); + + (hook function and driver private data are NULL) + + After that board/platform code must not call driver hook function! It is + possible that pointer to hook function will not be valid and calling will + cause undefined result. + +*/ + +/* Supported modes with maximal current limit */ +enum bq2415x_mode { + BQ2415X_MODE_NONE, /* unknown or no charger (100mA) */ + BQ2415X_MODE_HOST_CHARGER, /* usb host/hub charger (500mA) */ + BQ2415X_MODE_DEDICATED_CHARGER, /* dedicated charger (unlimited) */ + BQ2415X_MODE_BOOST, /* boost mode (charging disabled) */ +}; + +struct bq2415x_platform_data { + int current_limit; /* mA */ + int weak_battery_voltage; /* mV */ + int battery_regulation_voltage; /* mV */ + int charge_current; /* mA */ + int termination_current; /* mA */ + int resistor_sense; /* m ohm */ + int (*set_mode_hook)(void (*hook)(enum bq2415x_mode mode, void *data), + void *data); +}; + +#endif -- 2.30.2