From 0bbd5699c81d6887c4d895e85b56d8c23b1211ec Mon Sep 17 00:00:00 2001 From: Kim DoHyoung Date: Thu, 11 Aug 2022 08:13:35 +0000 Subject: [PATCH] ramips: mt7621: add support for Zbtlink ZBT-WG1608 (32M) Zbtlink ZBT-WG1608 is a Wi-Fi router intendent to use with WWAN (4G/5G) modems. Specifications: * SoC: MediaTek MT7621A * RAM: 256/512 MiB * Flash: 16/32 MiB (SPI NOR) * Wi-Fi: * MediaTek MT7603E : 2.4Ghz * MediaTek MT7613BE : 5Ghz * Ethernet: 10/100/1000 Mbps Ethernet x5 ports (4xLAN + WAN) * M.2: 1x slot with USB&SIM * EM7455/EM12-G/EM160R/RM500Q-AE * USB: 1x 3.0 Type-A port * External storage: 1x microSD (SDXC) slot * UART: console (115200 baud) * LED: * 1 power indicator * 1 WLAN 2.4G controlled (wlan 2G) * 3 SoC controlled (wlan 5G, wwan, internet) * 5 per Eth phy (4xLAN + WAN) MAC Addresses: * LAN : f8:5e:3c:xx:xx:e0 (Factory, 0xe000 (hex)) * WAN : f8:5e:3c:xx:xx:e1 (Factory, 0xe006 (hex)) * 2.4 GHz: f8:5e:3c:xx:xx:de (Factory, 0x0004 (hex)) * 5 GHz : f8:5e:3c:xx:xx:df (Factory, 0x8004 (hex)) Installation: * Vendor's firmware is OpenWrt (LEDE) based, so the sysupgrade image can be directly used to install OpenWrt. Firmware must be upgraded using the 'force' and 'do not save configuration' command line options (or correspondig web interface checkboxes) since the vendor firmware is from the pre-DSA era. Recovery Mode: * Press reset button, power up the device, wait for about 10sec. * Upload sysupgrade image through the firmware recovery mode web page at 192.168.1.1. Signed-off-by: Kim DoHyoung --- .../ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts | 16 ++++++++++++++++ .../ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi | 2 +- target/linux/ramips/image/mt7621.mk | 12 ++++++++++++ 3 files changed, 29 insertions(+), 1 deletion(-) create mode 100644 target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts diff --git a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts new file mode 100644 index 00000000000..00feec2ff3d --- /dev/null +++ b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621_zbtlink_zbt-wg1608.dtsi" + +/ { + compatible = "zbtlink,zbt-wg1608-32m", "mediatek,mt7621-soc"; + model = "Zbtlink ZBT-WG1608 (32M)"; +}; + +&flash0 { + broken-flash-reset; +}; + +&firmware { + reg = <0x50000 0x1fb0000>; +}; diff --git a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi index 59fab90ed1d..303708fab0e 100644 --- a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi +++ b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi @@ -61,7 +61,7 @@ &spi0 { status = "okay"; - flash@0 { + flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index b8fa0cefdb3..a5b69839a7b 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -2706,6 +2706,18 @@ define Device/zbtlink_zbt-wg1608-16m endef TARGET_DEVICES += zbtlink_zbt-wg1608-16m +define Device/zbtlink_zbt-wg1608-32m + $(Device/dsa-migration) + $(Device/uimage-lzma-loader) + IMAGE_SIZE := 32448k + DEVICE_VENDOR := Zbtlink + DEVICE_MODEL := ZBT-WG1608 + DEVICE_VARIANT := 32M + DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt7615e \ + kmod-mt7663-firmware-ap kmod-usb3 kmod-usb-ledtrig-usbport +endef +TARGET_DEVICES += zbtlink_zbt-wg1608-32m + define Device/zbtlink_zbt-wg2626 $(Device/dsa-migration) $(Device/uimage-lzma-loader) -- 2.30.2