From 0bb63534fdf3bc9a82bcfe9f5c6a9653b8b2a3f1 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 14 Jul 2017 03:26:17 +0300 Subject: [PATCH] drm: rcar-du: Perform the initial CRTC setup from rcar_du_crtc_get() The rcar_du_crtc_get() function is always immediately followed by a call to rcar_du_crtc_setup(). Call the later from the former to simplify the code, and add a comment to explain how the get and put calls are balanced. Signed-off-by: Laurent Pinchart Tested-by: Jacopo Mondi Reviewed-by: Jacopo Mondi --- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 107 +++++++++++++------------ 1 file changed, 56 insertions(+), 51 deletions(-) diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index 6288b9ad9e24..c89751c26f9c 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -66,39 +66,6 @@ static void rcar_du_crtc_clr_set(struct rcar_du_crtc *rcrtc, u32 reg, rcar_du_write(rcdu, rcrtc->mmio_offset + reg, (value & ~clr) | set); } -static int rcar_du_crtc_get(struct rcar_du_crtc *rcrtc) -{ - int ret; - - ret = clk_prepare_enable(rcrtc->clock); - if (ret < 0) - return ret; - - ret = clk_prepare_enable(rcrtc->extclock); - if (ret < 0) - goto error_clock; - - ret = rcar_du_group_get(rcrtc->group); - if (ret < 0) - goto error_group; - - return 0; - -error_group: - clk_disable_unprepare(rcrtc->extclock); -error_clock: - clk_disable_unprepare(rcrtc->clock); - return ret; -} - -static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc) -{ - rcar_du_group_put(rcrtc->group); - - clk_disable_unprepare(rcrtc->extclock); - clk_disable_unprepare(rcrtc->clock); -} - /* ----------------------------------------------------------------------------- * Hardware Setup */ @@ -546,6 +513,51 @@ static void rcar_du_crtc_setup(struct rcar_du_crtc *rcrtc) drm_crtc_vblank_on(&rcrtc->crtc); } +static int rcar_du_crtc_get(struct rcar_du_crtc *rcrtc) +{ + int ret; + + /* + * Guard against double-get, as the function is called from both the + * .atomic_enable() and .atomic_begin() handlers. + */ + if (rcrtc->initialized) + return 0; + + ret = clk_prepare_enable(rcrtc->clock); + if (ret < 0) + return ret; + + ret = clk_prepare_enable(rcrtc->extclock); + if (ret < 0) + goto error_clock; + + ret = rcar_du_group_get(rcrtc->group); + if (ret < 0) + goto error_group; + + rcar_du_crtc_setup(rcrtc); + rcrtc->initialized = true; + + return 0; + +error_group: + clk_disable_unprepare(rcrtc->extclock); +error_clock: + clk_disable_unprepare(rcrtc->clock); + return ret; +} + +static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc) +{ + rcar_du_group_put(rcrtc->group); + + clk_disable_unprepare(rcrtc->extclock); + clk_disable_unprepare(rcrtc->clock); + + rcrtc->initialized = false; +} + static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc) { bool interlaced; @@ -639,16 +651,7 @@ static void rcar_du_crtc_atomic_enable(struct drm_crtc *crtc, { struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); - /* - * If the CRTC has already been setup by the .atomic_begin() handler we - * can skip the setup stage. - */ - if (!rcrtc->initialized) { - rcar_du_crtc_get(rcrtc); - rcar_du_crtc_setup(rcrtc); - rcrtc->initialized = true; - } - + rcar_du_crtc_get(rcrtc); rcar_du_crtc_start(rcrtc); } @@ -667,7 +670,6 @@ static void rcar_du_crtc_atomic_disable(struct drm_crtc *crtc, } spin_unlock_irq(&crtc->dev->event_lock); - rcrtc->initialized = false; rcrtc->outputs = 0; } @@ -680,14 +682,17 @@ static void rcar_du_crtc_atomic_begin(struct drm_crtc *crtc, /* * If a mode set is in progress we can be called with the CRTC disabled. - * We then need to first setup the CRTC in order to configure planes. - * The .atomic_enable() handler will notice and skip the CRTC setup. + * We thus need to first get and setup the CRTC in order to configure + * planes. We must *not* put the CRTC in .atomic_flush(), as it must be + * kept awake until the .atomic_enable() call that will follow. The get + * operation in .atomic_enable() will in that case be a no-op, and the + * CRTC will be put later in .atomic_disable(). + * + * If a mode set is not in progress the CRTC is enabled, and the + * following get call will be a no-op. There is thus no need to belance + * it in .atomic_flush() either. */ - if (!rcrtc->initialized) { - rcar_du_crtc_get(rcrtc); - rcar_du_crtc_setup(rcrtc); - rcrtc->initialized = true; - } + rcar_du_crtc_get(rcrtc); if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE)) rcar_du_vsp_atomic_begin(rcrtc); -- 2.30.2