From 0b680206ccf5a4ae6adf759339ba7dc7ce06d284 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 4 Mar 2014 12:41:05 +0100 Subject: [PATCH] ARM: zynq: Fix building SPL without FPGA support When CONFIG_FPGA is defined but CONFIG_SPL_FPGA is not, the build fails: board.c: In function 'board_init': board.c:41:3: error: 'fpga' undeclared (first use in this function) fpga = fpga010; Fix this by expanding the "#if.." around this block to match the other FPGA checks and don't compile this block when buildign for SPL without FPGA support. Tested a bootloader that had CONFIG_FPGA defined without CONFIG_SPL_FPGA, this now compiles without errors and loading FPGA from u-boot works. Signed-off-by: Mike Looijmans Signed-off-by: Michal Simek --- board/xilinx/zynq/board.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 5190938a31..258632e52b 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -15,7 +15,8 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_FPGA +#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD)) static xilinx_desc fpga; /* It can be done differently */ @@ -29,7 +30,8 @@ static xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100); int board_init(void) { -#ifdef CONFIG_FPGA +#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD)) u32 idcode; idcode = zynq_slcr_get_idcode(); @@ -56,7 +58,8 @@ int board_init(void) } #endif -#ifdef CONFIG_FPGA +#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD)) fpga_init(); fpga_add(fpga_xilinx, &fpga); #endif -- 2.30.2