From 0a25fd37b008a34aadd9f94e924359a33ace3dd4 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 27 Sep 2006 11:21:53 +0000 Subject: [PATCH] Copy hardware docs from trunk to a general docs/ repository SVN-Revision: 4860 --- hardware/4g/accesscube/cpuinfo.txt | 11 + hardware/4g/accesscube/dmesg-2_4_27.txt | 86 ++++ hardware/4g/accesscube/info.txt | 21 + hardware/4g/accesscube/lspci-vv.txt | 28 + hardware/4g/accesscube/pci.txt | 11 + hardware/README.txt | 6 + hardware/asus/wl-500g/cpuinfo.txt | 18 + hardware/asus/wl-500g/dmesg-2_4_20.txt | 78 +++ hardware/asus/wl-500g/dmesg-2_4_29.txt | 95 ++++ hardware/asus/wl-500g/info.txt | 21 + hardware/asus/wl-500g/nvram.txt | 81 +++ hardware/asus/wl-500g/pci.txt | 52 ++ hardware/asus/wl-500gd/cfe.txt | 31 ++ hardware/asus/wl-500gd/cpuinfo.txt | 12 + hardware/asus/wl-500gd/dmesg-2_4_29.txt | 97 ++++ hardware/asus/wl-500gd/info.txt | 25 + hardware/asus/wl-500gd/nvram.txt | 360 +++++++++++++ hardware/asus/wl-500gd/pci.txt | 64 +++ hardware/buffalo/wbr2-g54/cpuinfo.txt | 12 + hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt | 89 ++++ hardware/buffalo/wbr2-g54/info.txt | 19 + hardware/buffalo/wbr2-g54/nvram.txt | 100 ++++ hardware/buffalo/wbr2-g54/pci.txt | 38 ++ hardware/buffalo/wla2-g54l/cpuinfo.txt | 11 + hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt | 85 ++++ hardware/buffalo/wla2-g54l/info.txt | 18 + hardware/buffalo/wla2-g54l/nvram.txt | 455 +++++++++++++++++ hardware/buffalo/wla2-g54l/pci.txt | 37 ++ hardware/linksys/wrt54g_v11/cpuinfo.txt | 16 + hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt | 96 ++++ hardware/linksys/wrt54g_v11/ifconfig.txt | 54 ++ hardware/linksys/wrt54g_v11/info.txt | 23 + hardware/linksys/wrt54g_v11/lspci-vv.txt | 92 ++++ hardware/linksys/wrt54g_v11/nvram.txt | 88 ++++ hardware/linksys/wrt54g_v11/pci.txt | 56 ++ hardware/linksys/wrt54g_v20/cpuinfo.txt | 11 + hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt | 97 ++++ hardware/linksys/wrt54g_v20/ifconfig.txt | 46 ++ hardware/linksys/wrt54g_v20/info.txt | 19 + hardware/linksys/wrt54g_v20/nvram.txt | 113 +++++ hardware/linksys/wrt54g_v20/pci.txt | 37 ++ hardware/linksys/wrt54g_v22/cpuinfo.txt | 16 + hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt | 117 +++++ hardware/linksys/wrt54g_v22/ifconfig.txt | 46 ++ hardware/linksys/wrt54g_v22/info.txt | 18 + hardware/linksys/wrt54g_v22/nvram.txt | 477 ++++++++++++++++++ hardware/linksys/wrt54g_v22/pci.txt | 37 ++ hardware/linksys/wrt54gs_v10/cpuinfo.txt | 16 + hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt | 88 ++++ hardware/linksys/wrt54gs_v10/ifconfig.txt | 45 ++ hardware/linksys/wrt54gs_v10/info.txt | 18 + hardware/linksys/wrt54gs_v10/nvram.txt | 105 ++++ hardware/linksys/wrt54gs_v10/pci.txt | 37 ++ hardware/linksys/wrt54gs_v11/cpuinfo.txt | 11 + hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt | 83 +++ hardware/linksys/wrt54gs_v11/info.txt | 21 + hardware/linksys/wrt54gs_v11/nvram.txt | 94 ++++ hardware/linksys/wrt54gs_v11/pci.txt | 37 ++ hardware/motorola/WR850Gv2/cpuinfo.txt | 16 + hardware/motorola/WR850Gv2/dmesg-2-4-29.txt | 97 ++++ hardware/motorola/WR850Gv2/ifconfig.txt | 39 ++ hardware/motorola/WR850Gv2/nvram.txt | 52 ++ hardware/motorola/WR850Gv2/pci.txt | 37 ++ hardware/soekris/net4801/cpuinfo.txt | 18 + hardware/soekris/net4801/dmesg-2.4.30.txt | 104 ++++ hardware/soekris/net4801/info.txt | 19 + hardware/soekris/net4801/pci.txt | 40 ++ 67 files changed, 4397 insertions(+) create mode 100644 hardware/4g/accesscube/cpuinfo.txt create mode 100644 hardware/4g/accesscube/dmesg-2_4_27.txt create mode 100644 hardware/4g/accesscube/info.txt create mode 100644 hardware/4g/accesscube/lspci-vv.txt create mode 100644 hardware/4g/accesscube/pci.txt create mode 100644 hardware/README.txt create mode 100644 hardware/asus/wl-500g/cpuinfo.txt create mode 100644 hardware/asus/wl-500g/dmesg-2_4_20.txt create mode 100644 hardware/asus/wl-500g/dmesg-2_4_29.txt create mode 100644 hardware/asus/wl-500g/info.txt create mode 100644 hardware/asus/wl-500g/nvram.txt create mode 100644 hardware/asus/wl-500g/pci.txt create mode 100644 hardware/asus/wl-500gd/cfe.txt create mode 100644 hardware/asus/wl-500gd/cpuinfo.txt create mode 100644 hardware/asus/wl-500gd/dmesg-2_4_29.txt create mode 100644 hardware/asus/wl-500gd/info.txt create mode 100644 hardware/asus/wl-500gd/nvram.txt create mode 100644 hardware/asus/wl-500gd/pci.txt create mode 100644 hardware/buffalo/wbr2-g54/cpuinfo.txt create mode 100644 hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt create mode 100644 hardware/buffalo/wbr2-g54/info.txt create mode 100644 hardware/buffalo/wbr2-g54/nvram.txt create mode 100644 hardware/buffalo/wbr2-g54/pci.txt create mode 100644 hardware/buffalo/wla2-g54l/cpuinfo.txt create mode 100644 hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt create mode 100644 hardware/buffalo/wla2-g54l/info.txt create mode 100644 hardware/buffalo/wla2-g54l/nvram.txt create mode 100644 hardware/buffalo/wla2-g54l/pci.txt create mode 100644 hardware/linksys/wrt54g_v11/cpuinfo.txt create mode 100644 hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt create mode 100644 hardware/linksys/wrt54g_v11/ifconfig.txt create mode 100644 hardware/linksys/wrt54g_v11/info.txt create mode 100644 hardware/linksys/wrt54g_v11/lspci-vv.txt create mode 100644 hardware/linksys/wrt54g_v11/nvram.txt create mode 100644 hardware/linksys/wrt54g_v11/pci.txt create mode 100644 hardware/linksys/wrt54g_v20/cpuinfo.txt create mode 100644 hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt create mode 100644 hardware/linksys/wrt54g_v20/ifconfig.txt create mode 100644 hardware/linksys/wrt54g_v20/info.txt create mode 100644 hardware/linksys/wrt54g_v20/nvram.txt create mode 100644 hardware/linksys/wrt54g_v20/pci.txt create mode 100644 hardware/linksys/wrt54g_v22/cpuinfo.txt create mode 100644 hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt create mode 100644 hardware/linksys/wrt54g_v22/ifconfig.txt create mode 100644 hardware/linksys/wrt54g_v22/info.txt create mode 100644 hardware/linksys/wrt54g_v22/nvram.txt create mode 100644 hardware/linksys/wrt54g_v22/pci.txt create mode 100644 hardware/linksys/wrt54gs_v10/cpuinfo.txt create mode 100644 hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt create mode 100644 hardware/linksys/wrt54gs_v10/ifconfig.txt create mode 100644 hardware/linksys/wrt54gs_v10/info.txt create mode 100644 hardware/linksys/wrt54gs_v10/nvram.txt create mode 100644 hardware/linksys/wrt54gs_v10/pci.txt create mode 100644 hardware/linksys/wrt54gs_v11/cpuinfo.txt create mode 100644 hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt create mode 100644 hardware/linksys/wrt54gs_v11/info.txt create mode 100644 hardware/linksys/wrt54gs_v11/nvram.txt create mode 100644 hardware/linksys/wrt54gs_v11/pci.txt create mode 100755 hardware/motorola/WR850Gv2/cpuinfo.txt create mode 100755 hardware/motorola/WR850Gv2/dmesg-2-4-29.txt create mode 100755 hardware/motorola/WR850Gv2/ifconfig.txt create mode 100755 hardware/motorola/WR850Gv2/nvram.txt create mode 100755 hardware/motorola/WR850Gv2/pci.txt create mode 100644 hardware/soekris/net4801/cpuinfo.txt create mode 100644 hardware/soekris/net4801/dmesg-2.4.30.txt create mode 100644 hardware/soekris/net4801/info.txt create mode 100644 hardware/soekris/net4801/pci.txt diff --git a/hardware/4g/accesscube/cpuinfo.txt b/hardware/4g/accesscube/cpuinfo.txt new file mode 100644 index 0000000..f3489a3 --- /dev/null +++ b/hardware/4g/accesscube/cpuinfo.txt @@ -0,0 +1,11 @@ +system type : MTX-1 +processor : 0 +cpu model : Au1500 V0.2 +BogoMIPS : 395.67 +wait instruction : no +microsecond timers : yes +tlb_entries : 32 +extra interrupt vector : yes +hardware watchpoint : yes +VCED exceptions : not available +VCEI exceptions : not available diff --git a/hardware/4g/accesscube/dmesg-2_4_27.txt b/hardware/4g/accesscube/dmesg-2_4_27.txt new file mode 100644 index 0000000..31daebf --- /dev/null +++ b/hardware/4g/accesscube/dmesg-2_4_27.txt @@ -0,0 +1,86 @@ +CPU revision is: 01030202 +Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes. +Primary data cache 16kB, 4-way, linesize 32 bytes. +Linux version 2.4.27 (rhandorf@devel) (gcc version 3.3.4) #1 Mon Dec 5 +15:55:07 EST 2005 +4G Systems MTX-1 Board +Au1500 AD (PRId 01030202) @ 396MHZ +BCLK switching enabled! +Determined physical RAM map: + memory: 04000000 @ 00000000 (usable) +On node 0 totalpages: 16384 +zone(0): 16384 pages. +zone(1): 0 pages. +zone(2): 0 pages. +Kernel command line: root=/dev/mtdblock/0 console=ttyS0,115200 +usb_ohci=base:0x10100000,len:0x100000,irq:26 +calculating r4koff... 003c6cc0(3960000) +CPU frequency 396.00 MHz +Calibrating delay loop... 395.67 BogoMIPS +Memory: 61504k/65536k available (1769k kernel code, 4032k reserved, 260k data, +88k init, 0k highmem) +Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) +Inode cache hash table entries: 4096 (order: 3, 32768 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) +Page-cache hash table entries: 16384 (order: 4, 65536 bytes) +Checking for 'wait' instruction... unavailable. +POSIX conformance testing by UNIFIX +Autoconfig PCI channel 0x80316838 +Scanning bus 00, I/O 0x00000300:0x00100000, Mem 0x40000000:0x50000000 +00:00.0 Class 0200: 168c:001b (rev 01) + Mem at 0x40000000 [size=0x10000] +00:01.0 Class 0200: 168c:001b (rev 01) + Mem at 0x40010000 [size=0x10000] +Non-coherent PCI accesses enabled +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +Installing knfsd (copyright (C) 1996 okir@monad.swb.de). +JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc. +pty: 256 Unix98 ptys configured +Serial driver version 1.01 (2001-02-08) with no serial options enabled +ttyS00 at 0xb1100000 (irq = 0) is a 16550 +ttyS01 at 0xb1400000 (irq = 3) is a 16550 +loop: loaded (max 8 devices) +au1000eth.c:1.4 ppopov@mvista.com +eth0: Au1x Ethernet found at 0xb1500000, irq 28 +eth0: LSI 80227 10/100 BaseT PHY at phy address 31 +eth0: Using LSI 80227 10/100 BaseT PHY as default +MTX-1 flash: probing 32-bit flash bus at 1e000000 +MTX-1 flash: Found 2 x16 devices at 0x0 in 32-bit mode + Amd/Fujitsu Extended Query Table at 0x0040 +MTX-1 flash: CFI does not contain boot bank location. Assuming top. +number of CFI chips: 1 +cfi_cmdset_0002: Disabling fast programming due to code brokenness. +cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. +Creating 4 MTD partitions on "MTX-1 flash": +0x00000000-0x01c00000 : "user fs" +0x01c00000-0x01d00000 : "yamon" +0x01d00000-0x01fc0000 : "raw kernel" +0x01fc0000-0x02000000 : "yamon environment" +usb.c: registered new driver usbdevfs +usb.c: registered new driver hub +host/usb-ohci.c: USB OHCI at membase 0xb0100000, IRQ 26 +host/usb-ohci.c: usb-builtin, non-PCI OHCI +usb.c: new USB bus registered, assigned bus number 1 +hub.c: USB hub found +hub.c: 2 ports detected +Initializing Cryptographic API +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 512 buckets, 4Kbytes +TCP: Hash tables configured (established 4096 bind 8192) +Linux IP multicast router 0.06 plus PIM-SM +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +MTX-1 watchdog driver +MTX-1 System Button driver +VFS: Mounted root (jffs2 filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 88k freed +Algorithmics/MIPS FPU Emulator v1.5 +eth0: link up +eth0: going to full duplex diff --git a/hardware/4g/accesscube/info.txt b/hardware/4g/accesscube/info.txt new file mode 100644 index 0000000..2f82f53 --- /dev/null +++ b/hardware/4g/accesscube/info.txt @@ -0,0 +1,21 @@ +4G Systems Access Cube + +Online description from 4G systems : +http://www.accesscube.com + +CPU: AMD Alchemy 1500 @ 400 Mhz +RAM: 64 MB +Flash: +serial port possible +JTAG port possible +Mini-PCI slot expansions +Delivered with 2x 6th generation Atheros Wireless Cards + +List of files: +cpuinfo.txt: contents of /proc/cpuinfo (2.4.27) +pci.txt: contents of /proc/pci (2.4.27) +dmesg-2_4_27.txt: dmesg from 2.4.27 kernel +lspci-vv.txt: output of lspci -vv -P ./proc/bus/pci (deported) + +-- +florian diff --git a/hardware/4g/accesscube/lspci-vv.txt b/hardware/4g/accesscube/lspci-vv.txt new file mode 100644 index 0000000..1e06cc6 --- /dev/null +++ b/hardware/4g/accesscube/lspci-vv.txt @@ -0,0 +1,28 @@ +00:00.0 Class 0200: 168c:001b (rev 01) + Subsystem: 168c:2063 + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- +Stepping- SERR- FastB2B- + Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- +SERR- TAbort- +SERR- +All bugs added by David S. Miller +VFS: Mounted root (squashfs filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 68k freed +Warning: unable to open an initial console. +Algorithmics/MIPS FPU Emulator v1.5 +diag boardtype: 0000041a +using v1 hardware +jffs2.bbc: SIZE compression mode activated. +eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.10 +eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.10 +PCI: Enabling device 01:02.0 (0004 -> 0006) +eth2: Broadcom BCM43XX 802.11 Wireless Controller 3.50.21.10 (Compiled in . at 20:53:00 on Jan 21 2004) +device eth0 entered promiscuous mode diff --git a/hardware/asus/wl-500g/dmesg-2_4_29.txt b/hardware/asus/wl-500g/dmesg-2_4_29.txt new file mode 100644 index 0000000..20e1c95 --- /dev/null +++ b/hardware/asus/wl-500g/dmesg-2_4_29.txt @@ -0,0 +1,95 @@ +CPU revision is: 00024000 +Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. +Primary data cache 4kB, 2-way, linesize 16 bytes. +Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Thu Feb 17 23:51:07 CET 2005 +Determined physical RAM map: +memory: 01000000 @ 00000000 (usable) +On node 0 totalpages: 4096 +zone(0): 4096 pages. +zone(1): 0 pages. +zone(2): 0 pages. +Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200 +CPU: BCM4710 rev 0 at 125 MHz +Using 62.400 MHz high precision timer. +!unable to setup serial console! +Calibrating delay loop... 82.94 BogoMIPS +Memory: 14044k/16384k available (1474k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem) +Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) +Inode cache hash table entries: 1024 (order: 1, 8192 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) +Page-cache hash table entries: 4096 (order: 2, 16384 bytes) +Checking for 'wait' instruction... unavailable. +POSIX conformance testing by UNIFIX +PCI: Fixing up bus 0 +PCI: Fixing up bridge +PCI: Setting latency timer of device 01:00.0 to 64 +PCI: Fixing up bus 1 +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. +Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher +pty: 256 Unix98 ptys configured +Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled +Software Watchdog Timer: 0.05, timer margin: 60 sec +loop: loaded (max 8 devices) +PPP generic driver version 2.4.2 +Amd/Fujitsu Extended Query Table v1.0 at 0x0040 +Physically mapped flash: JEDEC Device ID is 0xCA. Assuming broken CFI table. +Physically mapped flash: Swapping erase regions for broken CFI table. +number of CFI chips: 1 +cfi_cmdset_0002: Disabling fast programming due to code brokenness. +Flash device: 0x400000 at 0x1fc00000 +Physically mapped flash: squashfs filesystem found at block 946 +Creating 5 MTD partitions on "Physically mapped flash": +0x00000000-0x00040000 : "pmon" +0x00040000-0x003f0000 : "linux" +0x000ec990-0x001ceb48 : "rootfs" +mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only +0x003f0000-0x00400000 : "nvram" +0x001d0000-0x003f0000 : "OpenWrt" +sflash: chipcommon not found +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 512 buckets, 4Kbytes +TCP: Hash tables configured (established 1024 bind 2048) +ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack +ip_tables: (C) 2000-2002 Netfilter core team +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +NET4: Ethernet Bridge 008 for NET4.0 +Bridge firewalling registered +802.1Q VLAN Support v1.8 Ben Greear +All bugs added by David S. Miller +VFS: Mounted root (squashfs filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 100k freed +Warning: unable to open an initial console. +Algorithmics/MIPS FPU Emulator v1.5 +diag boardtype: 0000041a +using v1 hardware +led -> 00 +led -> 01 +jffs2.bbc: SIZE compression mode activated. +PCI: Setting latency timer of device 00:02.0 to 64 +5325E phy=FFFFFFFF +eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 00:08.0 to 64 +5325E phy=FFFFFFFF +eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 01:02.0 to 64 +PCI: Enabling device 01:02.0 (0004 -> 0006) +eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 +device eth0 entered promiscuous mode +device eth2 entered promiscuous mode +eth2: attempt to add interface with same source address. +br0: port 2(eth2) entering learning state +br0: port 1(eth0) entering learning state +br0: port 2(eth2) entering forwarding state +br0: topology change detected, propagating +br0: port 1(eth0) entering forwarding state +br0: topology change detected, propagating +led -> 00 diff --git a/hardware/asus/wl-500g/info.txt b/hardware/asus/wl-500g/info.txt new file mode 100644 index 0000000..cae6860 --- /dev/null +++ b/hardware/asus/wl-500g/info.txt @@ -0,0 +1,21 @@ +Asus WL-500g + +Online Description from Asus: +http://www.asus.com/products/communication/wireless/wl-500g/overview.htm + +CPU: BCM4710 at 125 MHz +RAM: 16 MB +Flash: 4 MB +2 Broadcom BCM47xx 10/100 Mbps Ethernet Controller +1 Broadcom BCM43XX 802.11 Wireless Controller +USB 1.1 +parallel port +no serial +JTAG interface + +List of files: +nvram.txt: contents of NVRAM after OpenWRT upgrade +cpuinfo.txt: contents of /proc/cpuinfo (2.4.20) +pci.txt: contents of /proc/pci (2.4.20) +dmesg-2_4_20.txt: dmesg from Kernel 2.4.20 +dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 diff --git a/hardware/asus/wl-500g/nvram.txt b/hardware/asus/wl-500g/nvram.txt new file mode 100644 index 0000000..a9a8ba0 --- /dev/null +++ b/hardware/asus/wl-500g/nvram.txt @@ -0,0 +1,81 @@ +The content of the original nvram after flashing with OpenWRT: + +wl0_net_mode=mixed +os_ram_addr=80001000 +wl0_frameburst=on +et0macaddr=00:11:D8:18:B9:08 +wl0_wep_buf= +watchdog=3000 +boot_wait=on +wl0_macmode1=disabled +wl0_infra=1 +wl0_country_code=AU +et0mdcport=0 +pmon_ver=PMON 3.11.19.0 +wl0_ifname=eth2 +wl0_mode=ap +os_flash_addr=bfc40000 +wl0_gmode=1 +boardtype=bcm94710dev +et1macaddr=00:11:D8:18:B9:08 +wl0_wep_last= +lan_netmask=255.255.255.0 +wl0_dtim=1 +wl0_ssid=linksys +et1mdcport=1 +wl0_key1= +wl0_key2= +wl0_key3= +wl0_key4= +wl0_plcphdr=long +wl0_rate=0 +wl0_closed=0 +wl0_macmode=disabled +wl0_radioids=BCM2050 +wl0_phytype=g +wl0_lazywds=1 +wl0_antdiv=-1 +wl0_wpa_psk= +wl0_mac_list= +wl0_unit=0 +wl_country_code=AU +wl0_wds= +wl0_radius_port=1812 +wl0_mac_deny= +wl0_auth=0 +wl0_radius_ipaddr= +lan_ipaddr=192.168.1.1 +clkfreq=125 +wl0_phytypes=g +wl0_frag=2346 +wl0_wep=off +sdram_config=0x0000 +wl0_country=Worldwide +scratch=a0180000 +wl0_rateset=default +wl0_wep_bit=64 +wl0_afterburner_override=-1 +sdram_refresh=0x8040 +sdram_ncdl=0x00000000 +hardware_version=WL500-02-02-01-00 +wl0_passphrase= +wl0_rts=2347 +wl0_wpa_gtk_rekey=3600 +wl0_key=1 +wl0_active_mac= +et0phyaddr=30 +wl0_radio=1 +wl0_bcn=100 +wl0_hwaddr=00:11:D8:18:B9:08 +wl0_wep_gen= +wl0_gmode_protection=auto +wl0_maclist= +sdram_init=0x0419 +dl_ram_addr=a0001000 +wl0_radius_key= +regulation_domain=0X30DE +wl0_corerev=5 +wl0_channel=6 +wl0_auth_mode=disabled +et1phyaddr=0 +boardnum=asusX diff --git a/hardware/asus/wl-500g/pci.txt b/hardware/asus/wl-500g/pci.txt new file mode 100644 index 0000000..8197666 --- /dev/null +++ b/hardware/asus/wl-500g/pci.txt @@ -0,0 +1,52 @@ +PCI devices found: + Bus 0, device 0, function 0: + Class 0500: PCI device 14e4:0803 (rev 0). + IRQ 6. + Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. + Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. + Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. + Non-prefetchable 32 bit memory at 0x80000000 [0xffffffff]. + Bus 0, device 1, function 0: + Class 0200: PCI device 14e4:4711 (rev 0). + IRQ 5. + Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. + Bus 0, device 2, function 0: + Class 0200: PCI device 14e4:4713 (rev 0). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. + Bus 0, device 3, function 0: + Class 0703: PCI device 14e4:4712 (rev 0). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. + Bus 0, device 4, function 0: + Class 0c03: PCI device 14e4:4715 (rev 0). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. + Bus 0, device 5, function 0: + Class 0604: PCI device 14e4:0804 (rev 0). + IRQ 6. + Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. + Non-prefetchable 32 bit memory at 0x8000000 [0xfffffff]. + Bus 0, device 6, function 0: + Class 0b30: PCI device 14e4:0805 (rev 0). + IRQ 6. + Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. + Non-prefetchable 32 bit memory at 0xff200000 [0xff3fffff]. + Bus 0, device 7, function 0: + Class 0501: PCI device 14e4:0811 (rev 0). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18007000 [0x18007fff]. + Non-prefetchable 32 bit memory at 0x1f000000 [0x1fffffff]. + Bus 0, device 8, function 0: + Class 0200: PCI device 14e4:4713 (rev 0). + IRQ 4. + Non-prefetchable 32 bit memory at 0x18008000 [0x18008fff]. + Bus 1, device 0, function 0: + Class 0600: PCI device 14e4:4710 (rev 1). + IRQ 6. + Non-prefetchable 32 bit memory at 0x40000000 [0x40001fff]. + Prefetchable 32 bit memory at 0x0 [0x7ffffff]. + Bus 1, device 2, function 0: + Class 0280: PCI device 14e4:4320 (rev 3). + IRQ 6. + Non-prefetchable 32 bit memory at 0x40002000 [0x40003fff]. diff --git a/hardware/asus/wl-500gd/cfe.txt b/hardware/asus/wl-500gd/cfe.txt new file mode 100644 index 0000000..72109c6 --- /dev/null +++ b/hardware/asus/wl-500gd/cfe.txt @@ -0,0 +1,31 @@ +CFE version 1.0.37 for BCM947XX (32bit,SP,LE) +Build Date: ¤G 3¤ë 1 16:49:41 CST 2005 (root@PaNLinux) +Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. + +Initializing Arena. +Initializing Devices. +et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 1.3.2.0 +rndis0: Broadcom USB RNDIS Network Adapter (P-t-P) +CPU type 0x29007: 200MHz +Total memory: 0x2000000 bytes (32MB) + +Total memory used by CFE: 0x80300000 - 0x80436F10 (1273616) +Initialized Data: 0x803313D0 - 0x80333760 (9104) +BSS Area: 0x80333760 - 0x80334F10 (6064) +Local Heap: 0x80334F10 - 0x80434F10 (1048576) +Stack Area: 0x80434F10 - 0x80436F10 (8192) +Text (code) segment: 0x80300000 - 0x803313D0 (201680) +Boot area (physical): 0x00437000 - 0x00477000 +Relocation Factor: I:00000000 - D:00000000 + +Device eth0: hwaddr 00-11-D8-01-CB-3E, ipaddr 192.168.1.1, mask 255.255.255.0 + gateway not set, nameserver not set +Rescue Flag disable. +Reading :: TFTP Server. +Failed.: Timeout occured +Lader:raw Filesys:raw Dev:flash0.os File: Options:(null) +Loading: ...... 1662976 bytes read +Entry at 0x80001000 +Closing network. +Starting program at 0x80001000 + diff --git a/hardware/asus/wl-500gd/cpuinfo.txt b/hardware/asus/wl-500gd/cpuinfo.txt new file mode 100644 index 0000000..335b012 --- /dev/null +++ b/hardware/asus/wl-500gd/cpuinfo.txt @@ -0,0 +1,12 @@ +system type : Broadcom BCM947XX +processor : 0 +cpu model : BCM3302 V0.7 +BogoMIPS : 199.47 +wait instruction : no +microsecond timers : yes +tlb_entries : 32 +extra interrupt vector : no +hardware watchpoint : no +VCED exceptions : not available +VCEI exceptions : not available + diff --git a/hardware/asus/wl-500gd/dmesg-2_4_29.txt b/hardware/asus/wl-500gd/dmesg-2_4_29.txt new file mode 100644 index 0000000..4a242e8 --- /dev/null +++ b/hardware/asus/wl-500gd/dmesg-2_4_29.txt @@ -0,0 +1,97 @@ +CPU revision is: 00029007 +Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. +Primary data cache 4kB, 2-way, linesize 16 bytes. +Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Fri Mar 25 12:39:57 CET 2005 +Determined physical RAM map: + memory: 02000000 @ 00000000 (usable) +On node 0 totalpages: 8192 +zone(0): 8192 pages. +zone(1): 0 pages. +zone(2): 0 pages. +Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200 +CPU: BCM5365 rev 1 at 200 MHz +Using 100.000 MHz high precision timer. +Calibrating delay loop... 199.47 BogoMIPS +Memory: 30304k/32768k available (1463k kernel code, 2464k reserved, 104k data, 88k init, 0k highmem) +Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) +Inode cache hash table entries: 2048 (order: 2, 16384 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) +Page-cache hash table entries: 8192 (order: 3, 32768 bytes) +Checking for 'wait' instruction... unavailable. +POSIX conformance testing by UNIFIX +PCI: Fixing up bus 0 +PCI: Fixing up bridge +PCI: Setting latency timer of device 01:00.0 to 64 +PCI: Fixing up bus 1 +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. +Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher +pty: 256 Unix98 ptys configured +Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled +ttyS00 at 0xb8000300 (irq = 3) is a 16550A +ttyS01 at 0xb8000400 (irq = 0) is a 16550A +Software Watchdog Timer: 0.05, timer margin: 60 sec +loop: loaded (max 8 devices) +Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 + Amd/Fujitsu Extended Query Table v1.1 at 0x0040 +number of CFI chips: 1 +cfi_cmdset_0002: Disabling fast programming due to code brokenness. +Flash device: 0x400000 at 0x1c000000 +Creating 4 MTD partitions on "Physically mapped flash": +0x00000000-0x00040000 : "pmon" +0x00040000-0x003f0000 : "linux" +0x000f0000-0x003f0000 : "rootfs" +0x003f0000-0x00400000 : "nvram" +sflash: found no supported devices +Initializing Cryptographic API +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 512 buckets, 4Kbytes +TCP: Hash tables configured (established 2048 bind 4096) +ip_conntrack version 2.1 (256 buckets, 2048 max) - 288 bytes per conntrack +ip_tables: (C) 2000-2002 Netfilter core team +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +NET4: Ethernet Bridge 008 for NET4.0 +Bridge firewalling registered +802.1Q VLAN Support v1.8 Ben Greear +All bugs added by David S. Miller +VFS: Mounted root (jffs2 filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 88k freed +Algorithmics/MIPS FPU Emulator v1.5 +diag boardtype: 00000000 +using v2 hardware +jffs2.bbc: SIZE compression mode activated. +PCI: Setting latency timer of device 00:01.0 to 64 +5325E phy=0 +5325E VLAN programming for BCM5325E-MDIO I/F switch +eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 01:03.0 to 64 +PCI: Enabling device 01:03.0 (0004 -> 0006) +eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 +device eth0 entered promiscuous mode +vlan0: add 01:00:5e:00:00:01 mcast address to master interface +device eth1 entered promiscuous mode +eth1: attempt to add interface with same source address. +br0: port 2(eth1) entering listening state +br0: port 1(vlan0) entering listening state +br0: port 2(eth1) entering learning state +br0: port 1(vlan0) entering learning state +br0: port 2(eth1) entering forwarding state +br0: topology change detected, propagating +br0: port 1(vlan0) entering forwarding state +br0: topology change detected, propagating +vlan1: add 01:00:5e:00:00:01 mcast address to master interface + diff --git a/hardware/asus/wl-500gd/info.txt b/hardware/asus/wl-500gd/info.txt new file mode 100644 index 0000000..4903714 --- /dev/null +++ b/hardware/asus/wl-500gd/info.txt @@ -0,0 +1,25 @@ +Asus WL-500g Deluxe (aka Wl-500GD, WL-500GX) + +Online Description from Asus: +http://www.asus.com/prog/spec.asp?m=WL-%20500g%20Deluxe&langs=01 + +CPU: BCM5365 at 200 MHz (integrated switch) +RAM: 32 MB +Flash: 4 MB +1 Broadcom BCM47XX 10/100Mbps Ethernet Controller +1 Broadcom BCM43XX 802.11 Wireless Controller +2 USB2.0 external +2 USB2.0 internal +2 serial internal +no JTAG + +List of files: +nvram.txt: contents of NVRAM after OpenWRT upgrade +cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) +pci.txt: contents of /proc/pci (2.4.29) +dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 +cfe.txt: output of the bootloader + +Notes: +Earlier models came with only 16MB ram activated. Please check +http://forum.chupa.nl/showthread.php?t=1704 for more info. diff --git a/hardware/asus/wl-500gd/nvram.txt b/hardware/asus/wl-500gd/nvram.txt new file mode 100644 index 0000000..82db232 --- /dev/null +++ b/hardware/asus/wl-500gd/nvram.txt @@ -0,0 +1,360 @@ +wl_radius_port=1812 +usb_webremote6_x= +wl_mode_x=0 +filter_lw_dstport_x= +wan_unit=0 +wl0_net_mode=mixed +os_ram_addr=80001000 +wan_route= +wl0_frameburst=0 +qos_enable_x=0 +misc_ping_x=0 +wan_pppoe_keepalive=0 +filter_wl_default_x=ACCEPT +log_ipaddr= +boardrev=0x10 +wl_gmode_protection_x=0 +wl_wdsapply_x=0 +usb_webremote2_x= +et0macaddr=00:11:D8:01:CB:3E +wan_pppoe_passwd= +watchdog=5000 +boot_wait=on +wl_phytypes= +rescueflag=disable +wl0_infra=1 +wan_mode_x=2 +wl0_country_code=AU +fw_disable=0 +et0mdcport=0 +usb_webmserver_x= +dhcp_dns1_x= +filter_lw_dstip_x= +wan_nat_x=1 +wl_infra=1 +reset_gpio=7 +wl_maclist_x= +filter_wl_time_x=00002359 +pmon_ver=CFE 1.3.2.0 +restore_defaults=0 +wl_radio_x=1 +vts_proto_x= +vts_ipaddr_x= +filter_lw_time_x=00002359 +wan_pppoe_service= +wan_lease=86400 +ddns_status_t= +wl_radius_ipaddr= +http_wanport= +usb_websecurity_time_x=00002359 +lan_gateway= +wl0_ifname=eth1 +wan_pppoe_txonly_x=0 +lan_domain= +timer_interval=3600 +wl_wdsnum_x=0 +usb_ftpusername_x= +usb_webactivex_x=7777 +forward_port0= +dr_staticnum_x=0 +lan_ipaddr_t= +wan_pppoe_mru=1492 +vts_desc_x= +wl0_mode=ap +wan_gateway= +usb_webrectime_x=0 +dhcp_staticmac_x= +time_interval=20 +dhcp_start=192.168.1.2 +usb_websecurity_x=0 +url_keyword_x= +wan_etherspeed_x=auto +wl0_ap_isolate=0 +dr_staticgateway_x= +vts_port_x= +usb_webfresh_x=1 +dhcp_end=192.168.1.254 +filter_wl_date_x=1111111 +os_flash_addr=bfc40000 +wl0_gmode=1 +dhcp_lease=86400 +usb_ftpnum_x=0 +filter_wl_icmp_x= +boardtype=bcm95365r +filter_lw_proto_x= +is_default=1 +usb_ftprights_x= +usb_ftpport_x=21 +url_num_x=0 +filter_lw_date_x=1111111 +wl_gmode=1 +wan_gateway_t= +stats_server= +ntp_server0=time.nist.gov +usb_websecurity_date_x=1111111 +ntp_server1= +filter_lw_icmp_x= +lan_netmask=255.255.255.0 +wl0_dtim=1 +wl0_ssid=default +filter_wl_dstport_x= +http_username=admin +usb_ftpbanip_x= +usb_ftpenable_x=1 +fw_wl_enable_x=0 +os_date=Oct 11 2004 +usb_webremote5_x= +http_lanport=80 +wl_plcphdr=long +wl_macmode=disabled +wan_domain= +wan_hwname= +wl0_key1= +wl_phytype=b +wan_netmask= +lan_lease=86400 +wl0_key2= +wl_lazywds=0 +wl0_key3= +macfilter_num_x=0 +wl0_key4= +filter_client0= +ddns_username_x= +wan_hwaddr_x= +filter_maclist= +wl_auth_mode=open +usb_webremote1_x= +usb_webhttpcheck_x=0 +usb_websense_x=1 +autofw_outport_x= +misc_lpr_x=0 +usb_ftpstaytimeout_x=240 +filter_lw_num_x=0 +filter_wl_num_x=0 +sp_battle_ips=1 +wl_wpa_psk= +http_passwd=admin +qos_ipaddr_x= +wan_pppoe_demand=0 +lan_stp=1 +fw_lw_enable_x=0 +wl_mode=ap +wl0_plcphdr=long +wl0_rate=0 +wl0_closed=0 +wl0_macmode=disabled +wl_wpa_gtk_rekey=0 +wl0_radioids=BCM2050 +wl0_phytype=g +wl0_lazywds=0 +dr_default_x=1 +filter_wl_dstip_x= +autofw_inport_x= +wan_route_x=IP_Routed +wl0_afterburner=off +dr_staticnetmask_x=0 +wl0_antdiv=-1 +lan_hwaddr= +wan_dns= +filter_lw_srcip_x= +wl_mode_ex=ap +wan_dns2_x= +wl_dtim=1 +wl_ssid=default +wl0_wpa_psk= +dhcp_staticnum_x=0 +wan_pppoe_mtu=1492 +usb_webcaption_x=Web Camera Live Demo!!! +wan_netmask_t= +dhcp_wins=wan +wl_macapply_x=Both +os_server= +dr_static_matric_x=1 +wl_key1= +wan_proto=dhcp +sr_num_x=0 +wl_key2= +wl0_unit=0 +wan_ipaddr_t= +wl_key3= +wl_country_code=AU +wl_key4= +wl_hwaddr= +ddns_enable_x=0 +sr_if_x= +usb_websendto_x= +wan_pppoe_idletime=1800 +wl0_wds= +filter_wl_proto_x= +usb_ftpmax_x=12 +sr_rip_x=0 +wl_rate=0 +log_level=0 +ntp_server=192.5.41.40 192.5.41.41 133.100.9.2 +wan_hwaddr= +usb_webremote4_x= +sr_enable_x=0 +misc_http_x=0 +wl_phrase_x= +lan_ifnames=eth0 eth1 +wl0_radius_port=1812 +wl0_auth=0 +wl0_radius_ipaddr= +ddns_wildcard_x=0 +lan_hostname= +wl_country= +vlan_enable=1 +qos_priority_x= +wl_wep_x=0 +filter_lw_srcport_x= +usb_webhttpport_x=7776 +wan_pppoe_username= +wan_ifnames=eth0 +wl_crypto=0 +wl_rateset=default +usb_webremote_x=LAN Only +lan_gateway_t= +qos_maxbw_x= +autofw_num_x=0 +wl_radius_key= +lan_proto=dhcp +os_name=linux +lan_ipaddr=192.168.1.1 +clkfreq=200 +url_enable_x=0 +wan_dns_t= +wl_unit=0 +wl0_phytypes=g +wl0_frag=2346 +wl0_wep=disabled +router_disable=0 +sdram_config=0x32 +wl0_country= +wl_wdslist_x= +dhcp_gateway_x= +usb_ftpsuper_x=0 +dmz_ipaddr= +wl_wds= +scratch=a0180000 +wl0_rateset=default +usb_ftppasswd_x= +wan_dns1_x= +usb_ftpanonymous_x=1 +wan_primary=0 +lan_ifname=br0 +usb_webmode_x=1 +filter_wl_srcip_x= +sdram_refresh=0x00 +qos_dir_x= +dhcp_domain=wan +usb_webenable_x=1 +wl_auth=0 +sdram_ncdl=0x3e +usb_ftpmaxuser_x= +usb_webdriver_x=0 +hardware_version=WL500gd-01-04-01-50 +usb_ftptimeout_x=120 +wl_frameburst=0 +ezc_enable=1 +qos_minbw_x= +wl_macnum_x=0 +is_modified=0 +wan_ipaddr= +usb_websubject_x=Motion detection alert!!! +dmz_ip= +sr_gateway_x= +misc_natlog_x=0 +wl0_rts=2347 +wan_pppoe_relay_x=0 +wl_ifname= +wan_wins= +wl_wep=disabled +os_version=1.3.2.0 +wl_gmode_protection=auto +wl0_wpa_gtk_rekey=0 +wl_radio_time_x=00002359 +dhcp_staticip_x= +lan_netmask_t= +wl_frag=2346 +wl0_key=1 +dhcp_static_x=0 +macfilter_list_x= +usb_webremote3_x= +wl_maclist= +filter_macmode=deny +filter_lw_default_x=ACCEPT +filter_wl_srcport_x= +console_loglevel=1 +et0phyaddr=254 +time_zone=GMT0 +autofw_inproto_x= +vts_enable_x=1 +fw_enable_x=1 +usb_webattach_x=1 +wan_ifname=eth0 +wl_radioids= +wan_status_t= +vts_num_x=0 +wan_hostname= +wl0_radio=1 +wl_corerev= +sr_ipaddr_x= +dr_static_rip_x=0 +qos_port_x= +wl_channel=0 +wl0_bcn=100 +sr_matric_x= +wl0_hwaddr=00:11:D8:01:CB:3E +wl_afterburner=off +wl_radio=1 +usb_ftpscript_x= +ezc_version=1 +wl0_gmode_protection=auto +usb_webimage_x=1 +wl_radio_date_x=1111111 +wl0_maclist= +autofw_outproto_x= +ddns_passwd_x= +wl_rts=2347 +sdram_init=0x2008 +macfilter_enable_x=disabled +wl_ap_isolate=0 +wan_desc= +lan_wins= +lan_hwnames= +dl_ram_addr=a0001000 +url_time_x=00002359 +wan_dnsenable_x=1 +wl0_radius_key= +regulation_domain=0x30DE +wl_radio_power_x=19 +autofw_enable_x=0 +wl0_corerev=5 +wl_key=1 +wl0_channel=0 +ddns_hostname_x= +lan_proto_x=1 +sr_netmask_x= +upnp_enable=1 +fw_log_x=none +wan_pppoe_ac= +dhcp_enable_x=1 +misc_httpport_x=8080 +wan_proto_t= +wl0_auth_mode=open +wl_closed=0 +wan_heartbeat_x= +autofw_port0= +wl0_crypto=0 +dhcp_wins_x= +autofw_desc_x= +boardnum=45 +wan_pppoe_ifname= +dr_staticipaddr_x= +vts_protono_x= +wl_bcn=100 +qos_rulenum_x=0 +url_date_x=1111111 +ddns_server_x= +usb_bannum_x=0 +wl_antdiv=-1 diff --git a/hardware/asus/wl-500gd/pci.txt b/hardware/asus/wl-500gd/pci.txt new file mode 100644 index 0000000..2cca7f8 --- /dev/null +++ b/hardware/asus/wl-500gd/pci.txt @@ -0,0 +1,64 @@ +PCI devices found: + Bus 0, device 0, function 0: + Class 0501: PCI device 14e4:0800 (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. + Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. + Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. + Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. + Bus 0, device 1, function 0: + Class 0200: PCI device 14e4:4713 (rev 1). + IRQ 4. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. + Bus 0, device 2, function 0: + Class 1000: PCI device 14e4:4718 (rev 1). + IRQ 5. + Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. + Bus 0, device 3, function 0: + Class 0c03: PCI device 14e4:4715 (rev 1). + IRQ 6. + Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. + Bus 0, device 4, function 0: + Class 0604: PCI device 14e4:0804 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. + Non-prefetchable 32 bit memory at 0x8000000 [0xfffffff]. + Bus 0, device 5, function 0: + Class 0b30: PCI device 14e4:0816 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. + Bus 0, device 6, function 0: + Class 0500: PCI device 14e4:080f (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. + Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. + Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. + Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. + Bus 1, device 0, function 0: + Class 0600: PCI device 14e4:5365 (rev 0). + IRQ 2. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x40000000 [0x40001fff]. + Prefetchable 32 bit memory at 0x0 [0x7ffffff]. + Bus 1, device 2, function 0: + Class 0c03: PCI device 1106:3038 (rev 97). + IRQ 2. + Master Capable. Latency=22. + I/O at 0x100 [0x11f]. + Bus 1, device 2, function 1: + Class 0c03: PCI device 1106:3038 (rev 97). + IRQ 2. + Master Capable. Latency=22. + I/O at 0x120 [0x13f]. + Bus 1, device 2, function 2: + Class 0c03: PCI device 1106:3104 (rev 99). + IRQ 2. + Master Capable. Latency=22. + Non-prefetchable 32 bit memory at 0x40002000 [0x400020ff]. + Bus 1, device 3, function 0: + Class 0280: PCI device 14e4:4320 (rev 3). + IRQ 2. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x40004000 [0x40005fff]. + diff --git a/hardware/buffalo/wbr2-g54/cpuinfo.txt b/hardware/buffalo/wbr2-g54/cpuinfo.txt new file mode 100644 index 0000000..335b012 --- /dev/null +++ b/hardware/buffalo/wbr2-g54/cpuinfo.txt @@ -0,0 +1,12 @@ +system type : Broadcom BCM947XX +processor : 0 +cpu model : BCM3302 V0.7 +BogoMIPS : 199.47 +wait instruction : no +microsecond timers : yes +tlb_entries : 32 +extra interrupt vector : no +hardware watchpoint : no +VCED exceptions : not available +VCEI exceptions : not available + diff --git a/hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt b/hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt new file mode 100644 index 0000000..4fc7384 --- /dev/null +++ b/hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt @@ -0,0 +1,89 @@ +PU revision is: 00029007 +Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. +Primary data cache 4kB, 2-way, linesize 16 bytes. +Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Sun Mar 27 17:16:55 CEST 2005 +Determined physical RAM map: + memory: 01000000 @ 00000000 (usable) +On node 0 totalpages: 4096 +zone(0): 4096 pages. +zone(1): 0 pages. +zone(2): 0 pages. +Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200 +CPU: BCM4712 rev 1 at 200 MHz +Using 100.000 MHz high precision timer. +Calibrating delay loop... 199.47 BogoMIPS +Memory: 14028k/16384k available (1493k kernel code, 2356k reserved, 104k data, 88k init, 0k highmem) +Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) +Inode cache hash table entries: 1024 (order: 1, 8192 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) +Page-cache hash table entries: 4096 (order: 2, 16384 bytes) +Checking for 'wait' instruction... unavailable. +POSIX conformance testing by UNIFIX +PCI: Disabled +PCI: Fixing up bus 0 +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. +Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher +pty: 256 Unix98 ptys configured +Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled +ttyS00 at 0xb8000300 (irq = 3) is a 16550A +ttyS01 at 0xb8000400 (irq = 0) is a 16550A +Software Watchdog Timer: 0.05, timer margin: 60 sec +loop: loaded (max 8 devices) +PPP generic driver version 2.4.2 +Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 + Amd/Fujitsu Extended Query Table v1.3 at 0x0040 +number of CFI chips: 1 +cfi_cmdset_0002: Disabling fast programming due to code brokenness. +Flash device: 0x400000 at 0x1c000000 +Creating 4 MTD partitions on "Physically mapped flash": +0x00000000-0x00040000 : "pmon" +0x00040000-0x003f0000 : "linux" +0x000f0000-0x003f0000 : "rootfs" +0x003f0000-0x00400000 : "nvram" +sflash: found no supported devices +Initializing Cryptographic API +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 512 buckets, 4Kbytes +TCP: Hash tables configured (established 1024 bind 2048) +ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack +ip_tables: (C) 2000-2002 Netfilter core team +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +NET4: Ethernet Bridge 008 for NET4.0 +Bridge firewalling registered +802.1Q VLAN Support v1.8 Ben Greear +All bugs added by David S. Miller +cramfs: wrong magic +VFS: Mounted root (jffs2 filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 88k freed +Algorithmics/MIPS FPU Emulator v1.5 +jffs2.bbc: SIZE compression mode activated. +PCI: Setting latency timer of device 00:02.0 to 64 +5325E phy=FFFFFFFF +eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 00:01.0 to 64 +eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 +device eth0 entered promiscuous mode +vlan0: add 01:00:5e:00:00:01 mcast address to master interface +device eth1 entered promiscuous mode +br0: port 2(eth1) entering learning state +br0: port 1(vlan0) entering learning state +br0: port 2(eth1) entering forwarding state +br0: topology change detected, propagating +br0: port 1(vlan0) entering forwarding state +br0: topology change detected, propagating +vlan1: add 01:00:5e:00:00:01 mcast address to master interface diff --git a/hardware/buffalo/wbr2-g54/info.txt b/hardware/buffalo/wbr2-g54/info.txt new file mode 100644 index 0000000..60f1523 --- /dev/null +++ b/hardware/buffalo/wbr2-g54/info.txt @@ -0,0 +1,19 @@ +Buffalo WBR2-G54 + +Online Description from Buffalo: +http://www.buffalotech.co.uk/webcontent/products/wireless/index.php?cat=G54&itemID=wbr2-g54 + +CPU: BCM4712 at 200 MHz +RAM: 16 MB +Flash: 4 MB +1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller +1 Broadcom BCM4320 802.11 Wireless Controller +serial port possible +JTAG interface + +List of files: +nvram.txt: contents of NVRAM after OpenWRT upgrade +cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) +pci.txt: contents of /proc/pci (2.4.29) +dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 + diff --git a/hardware/buffalo/wbr2-g54/nvram.txt b/hardware/buffalo/wbr2-g54/nvram.txt new file mode 100644 index 0000000..df73509 --- /dev/null +++ b/hardware/buffalo/wbr2-g54/nvram.txt @@ -0,0 +1,100 @@ +wl0_net_mode=mixed +os_ram_addr=80001000 +wl0_frameburst=off +boardrev=0x10 +il0macaddr=00:0D:0B:1A:93:8D +et0macaddr=00:0D:0B:1A:93:8C +boot_wait=on +watchdog=1000 +wl0_infra=1 +wl0_country_code=AU +et0mdcport=0 +pmon_ver=CFE 3.51.21.10 +wl0_ifname=eth1 +gpio2=adm_eecs +gpio3=adm_eesk +gpio4=adm_eedi +gpio5=adm_rc +vlan0ports=1 2 3 4 5* +wl0_mode=ap +wl0_ap_isolate=0 +os_flash_addr=bfc40000 +wl0_gmode=6 +sromrev=2 +boardtype=0x0101 +lan_netmask=255.255.255.0 +wl0_dtim=1 +wl0_ssid=000D0B1A938D +wl0_key1= +wl0id=0x4320 +wl0_key2= +wl0_key3= +wl0_key4= +pmon_date=Feb 20 2004 16:36:31 +ag0=255 +buffalo_id=29bb0332 +wl0_plcphdr=long +wl0_rate=0 +wl0_closed=0 +wl0_macmode=disabled +wl0gpio0=2 +wl0_radioids=BCM2050 +wl0gpio1=0 +wl0_phytype=g +wl0gpio2=0 +wl0_lazywds=1 +wl0gpio3=0 +wl0gpio4=0 +wl0gpio5=0 +boardflags2=0 +wl0_afterburner=auto +wl0_antdiv=-1 +wl0_wpa_psk= +wl0_unit=0 +wl_country_code=AU +memc_config=0x00048540 +pa0itssit=62 +wl0_wds= +cctl=0 +wl0_radius_port=1812 +wl0_auth=0 +wl0_radius_ipaddr= +pa0maxpwr=60 +clkfreq=200 +lan_ipaddr=192.168.11.1 +vlan1hwname=et0 +aa0=3 +wl0_phytypes=g +wl0_frag=2346 +wl0_wep=disabled +sdram_config=0x0032 +wl0_country= +vlan1ports=0 5 +scratch=a0180000 +ccode=0 +wl0_rateset=default +boardflags=0x0188 +sdram_refresh=0x0000 +sdram_ncdl=0x23 +wl0_rts=2347 +wl0_wpa_gtk_rekey=3600 +wl0_key=1 +et0phyaddr=30 +wl0_radio=1 +wl0_bcn=100 +wl0_hwaddr=00:0D:0B:1A:93:8D +wl0_gmode_protection=auto +pa0b0=0x1136 +wl0_maclist= +pa0b1=0xfb93 +pa0b2=0xfea5 +sdram_init=0x0000 +vlan0hwname=et0 +dl_ram_addr=a0001000 +wl0_radius_key= +wl0_corerev=7 +wl0_channel=11 +wl0_auth_mode=open +wl0_crypto=tkip +boardnum=00 + diff --git a/hardware/buffalo/wbr2-g54/pci.txt b/hardware/buffalo/wbr2-g54/pci.txt new file mode 100644 index 0000000..5bf36ab --- /dev/null +++ b/hardware/buffalo/wbr2-g54/pci.txt @@ -0,0 +1,38 @@ +PCI devices found: + Bus 0, device 0, function 0: + Class 0501: PCI device 14e4:0800 (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. + Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. + Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. + Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. + Bus 0, device 1, function 0: + Class 0280: PCI device 14e4:4320 (rev 1). + IRQ 4. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. + Bus 0, device 2, function 0: + Class 0200: PCI device 14e4:4713 (rev 1). + IRQ 5. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. + Bus 0, device 3, function 0: + Class 0c03: PCI device 14e4:4717 (rev 1). + IRQ 6. + Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. + Bus 0, device 4, function 0: + Class 0c03: PCI device 14e4:4716 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. + Bus 0, device 5, function 0: + Class 0b30: PCI device 14e4:0816 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. + Bus 0, device 6, function 0: + Class 0500: PCI device 14e4:080f (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. + Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. + Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. + Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. + diff --git a/hardware/buffalo/wla2-g54l/cpuinfo.txt b/hardware/buffalo/wla2-g54l/cpuinfo.txt new file mode 100644 index 0000000..1e91441 --- /dev/null +++ b/hardware/buffalo/wla2-g54l/cpuinfo.txt @@ -0,0 +1,11 @@ +system type : Broadcom BCM947XX +processor : 0 +cpu model : BCM3302 V0.7 +BogoMIPS : 199.47 +wait instruction : no +microsecond timers : yes +tlb_entries : 32 +extra interrupt vector : no +hardware watchpoint : no +VCED exceptions : not available +VCEI exceptions : not available diff --git a/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt b/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt new file mode 100644 index 0000000..a0c93c2 --- /dev/null +++ b/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt @@ -0,0 +1,85 @@ +CPU revision is: 00029007 +Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. +Primary data cache 4kB, 2-way, linesize 16 bytes. +Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Fri Mar 25 12:39:57 CET 2005 +Determined physical RAM map: + memory: 01000000 @ 00000000 (usable) +On node 0 totalpages: 4096 +zone(0): 4096 pages. +zone(1): 0 pages. +zone(2): 0 pages. +Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200 +CPU: BCM4712 rev 1 at 200 MHz +Using 100.000 MHz high precision timer. +Calibrating delay loop... 199.47 BogoMIPS +Memory: 14096k/16384k available (1463k kernel code, 2288k reserved, 104k data, 88k init, 0k highmem) +Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) +Inode cache hash table entries: 1024 (order: 1, 8192 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) +Page-cache hash table entries: 4096 (order: 2, 16384 bytes) +Checking for 'wait' instruction... unavailable. +POSIX conformance testing by UNIFIX +PCI: Disabled +PCI: Fixing up bus 0 +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. +Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher +pty: 256 Unix98 ptys configured +Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled +ttyS00 at 0xb8000300 (irq = 3) is a 16550A +ttyS01 at 0xb8000400 (irq = 0) is a 16550A +Software Watchdog Timer: 0.05, timer margin: 60 sec +loop: loaded (max 8 devices) +Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 + Amd/Fujitsu Extended Query Table v1.0 at 0x0040 +number of CFI chips: 1 +cfi_cmdset_0002: Disabling fast programming due to code brokenness. +Flash device: 0x400000 at 0x1c000000 +Creating 4 MTD partitions on "Physically mapped flash": +0x00000000-0x00040000 : "pmon" +0x00040000-0x003f0000 : "linux" +0x000f0000-0x003f0000 : "rootfs" +0x003f0000-0x00400000 : "nvram" +sflash: found no supported devices +Initializing Cryptographic API +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 512 buckets, 4Kbytes +TCP: Hash tables configured (established 1024 bind 2048) +ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack +ip_tables: (C) 2000-2002 Netfilter core team +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +NET4: Ethernet Bridge 008 for NET4.0 +Bridge firewalling registered +802.1Q VLAN Support v1.8 Ben Greear +All bugs added by David S. Miller +VFS: Mounted root (jffs2 filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 88k freed +Algorithmics/MIPS FPU Emulator v1.5 +diag boardtype: 00000101 +using v2 hardware +jffs2.bbc: SIZE compression mode activated. +PCI: Setting latency timer of device 00:02.0 to 64 +5325E phy=FFFFFFFF +5325E VLAN programming for BCM5325E-MDIO I/F switch +eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 00:01.0 to 64 +eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 +device eth0 entered promiscuous mode +vlan0: add 01:00:5e:00:00:01 mcast address to master interface +br0: port 1(vlan0) entering learning state +br0: port 1(vlan0) entering forwarding state +br0: topology change detected, propagating diff --git a/hardware/buffalo/wla2-g54l/info.txt b/hardware/buffalo/wla2-g54l/info.txt new file mode 100644 index 0000000..b979cdd --- /dev/null +++ b/hardware/buffalo/wla2-g54l/info.txt @@ -0,0 +1,18 @@ +Buffalo WLA2-G54L + +Online Description from Buffalo: +http://www.buffalotech.co.uk/webcontent/products/wireless/index.php?cat=G54&itemID=wla2-g54l + +CPU: BCM4712 at 200 MHz +RAM: 16 MB +Flash: 4 MB +1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller +1 Broadcom BCM4320 802.11 Wireless Controller +serial port possible +no JTAG interface + +List of files: +nvram.txt: contents of NVRAM after OpenWRT upgrade +cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) +pci.txt: contents of /proc/pci (2.4.29) +dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 diff --git a/hardware/buffalo/wla2-g54l/nvram.txt b/hardware/buffalo/wla2-g54l/nvram.txt new file mode 100644 index 0000000..8545f1a --- /dev/null +++ b/hardware/buffalo/wla2-g54l/nvram.txt @@ -0,0 +1,455 @@ +ni_netmask=255.255.255.0 +wl_radius_port=1812 +pppoe_demand_select_1=1 +pppoe_demand_select_2=1 +pppoe_demand_select_3=1 +os_ram_addr=80001000 +dhcp_except= +pppoe_demand_select_4=1 +wl0_net_mode=mixed +log_send_forward=0 +wl0_frameburst=on +log_send_enable=0 +il0macaddr=00:0D:0B:41:8A:C3 +boardrev=0x10 +filter_udp= +ntp_interval=24 +forward_ipmasq_time=5 +hostname= +et0macaddr=00:0D:0B:41:8A:C2 +pppoe_demand_1=0 +wl_gmode_protection_cts=1 +pppoe_demand_2=0 +wl_pwrout_per=100 +wep_ascii_select1=1 +log_dhcp_cli=1 +pppoe_demand_3=0 +d11b_rateset=default +d11a_channel=64 +d11g_mode=5 +wep_ascii_select2=1 +pppoe_demand_4=0 +wl0_wep_buf= +watchdog=1000 +boot_wait=on +wep_ascii_select3=1 +wep_ascii_select4=1 +wl0_macmode1=disabled +ini_ipaddr=192.168.11.100 +wl0_infra=1 +et0mdcport=0 +wl0_country_code=AU +d11b_bcn=100 +pppoe_keepalive=1 +log_send_config=1 +pppoe_label_1= +pppoe_label_2= +pmon_ver=CFE 3.51.21.10 +pppoe_label_3= +d11g_protection=0 +restore_defaults=0 +attack_spoofing=0 +pppoe_label_4= +wan_lease=864000 +d11b_frag=2346 +d11g_dtim=1 +filter_melco= +http_wanport= +wl_radius_ipaddr= +pppoe_label= +pppoe_demand_select=1 +wan_hwaddr_select_def=1 +pppoe_mtu_1=1454 +wl0_ifname=eth1 +pppoe_mtu_2=1454 +timer_interval=3600 +pppoe_mtu_3=1454 +gpio2=adm_eecs +filter_lansetup=0 +pppoe_mtu_4=1454 +gpio3=adm_eesk +gpio4=adm_eedi +dhcp_manual= +ap_name=AP000D0B418AC2 +pppoe_mtu=1454 +vlan0ports=1 2 3 4 5* +gpio5=adm_rc +log_disp_name=NEWEST +route_pppoe= +filter_tcp= +pppoe_keepalive_1=1 +pppoe_keepalive_2=1 +log_attack=0 +pppoe_keepalive_3=1 +wl0_mode=ap +dhcp_start=192.168.11.2 +pppoe_keepalive_4=1 +wl0_ap_isolate=0 +httpc_auth_ipaddr_tmp= +dhcp_end=192.168.11.17 +log_send_dhcp_serv=0 +os_flash_addr=bfc40000 +domain= +log_send_dhcp_cli=1 +sromrev=2 +ap_wl_version= +wl0_gmode=5 +httpc_login_off_time=5 +pppoe_username_1= +boardtype=0x0101 +pppoe_username_2= +attack_cm_addr= +pppoe_username_3= +wl_gmode=5 +pppoe_username_4= +stats_server= +log_pppoe=0 +static_route= +d11g_rate=0 +log_ntpcli=1 +lan_netmask=255.255.255.0 +log_send_pppoe=0 +attack_select=0 +wl0_wep_last= +http_username=root +wl0_ssid=000D0B418AC2 +wl0_dtim=1 +pmon_upgrade=0 +http_lanport=80 +wl_plcphdr=long +wl_macmode=disabled +lcp_echo_failure_1=6 +wan_hwname= +log_disp_page=0 +lcp_echo_failure_2=6 +wl0id=0x4320 +wan_netmask=255.255.255.0 +d11a_dtim=1 +lcp_echo_failure_3=6 +wl_phytype=g +wl0_key1= +wl_lazywds=0 +lcp_echo_failure_4=6 +wl0_key2= +wl0_key3= +wl0_key4= +wl_auth_mode=disabled +log_etc=1 +pppoe_mru_1=1454 +pppoe_mru_2=1454 +dhcp_domain_select=NONE +attack_mail_pop_addr= +pppoe_mru_3=1454 +d11g_rts=2347 +pppoe_mru_4=1454 +pmon_date=Mar 12 2004 14:29:18 +ag0=255 +http_passwd= +wl_wpa_psk= +d11b_channel=11 +melco_web_carrier_select= +wl_wds_list= +log_level_notice=1 +log_power=1 +lan_stp=0 +forward_melco= +dhcp_dns_ip1= +log_wired=1 +wan_ipaddr_bak= +buffalo_id=29129 +wl_mode=ap +dhcp_dns_ip2= +log_send_power=1 +log_send_wired=1 +melco_web_lan=0 +wl0_closed=0 +wl0_rate=0 +wl0_plcphdr=long +wl0gpio0=2 +wl_wpa_gtk_rekey=0 +d11g_rateset=default +wl0_macmode=disabled +wl0gpio1=0 +wl0_radioids=BCM2050 +wl0gpio2=0 +wl0_phytype=g +wl0gpio3=0 +wl0_lazywds=0 +wl0gpio4=0 +dhcp_gw_select=AP +wl0gpio5=0 +pppoe_disable_1=0 +boardflags2=0 +pppoe_disable_2=0 +log_level_err=1 +pppoe_disable_3=0 +wl0_afterburner=auto +d11a_rate=0 +log_filter=1 +pppoe_disable_4=0 +lan_hwaddr= +wl0_antdiv=-1 +asts_data= +wl_ssid=000D0B418AC2 +wl_dtim=1 +wl0_wpa_psk= +d11g_bcn=100 +time_zone_melco=GMT+6 +log_send_level_notice=1 +pppoe_hostuniq_1= +httpc_auth_ipaddr= +pppoe_hostuniq_2= +wl0_mac_list= +dhcp_wins= +pppoe_hostuniq_3= +os_server= +ap_fw_code=00 +pppoe_hostuniq_4= +wan_proto=dhcp +wl_key1= +wl_key2= +wl_key3= +wl0_unit=0 +wl_key4= +wl_country_code=AU +memc_config=0x0004854a +wl_hwaddr=00:0D:0B:41:8A:C3 +pppoe_session_default=-1 +pppoe_manual=0 +dhcp_wins_select=NONE +pa0itssit=62 +flash_recover=1 +wl_txpwr=22 +wl_mac_melco= +ntp_enable=0 +time_backup=2003.01.01-00:00:00 +melco_web_wan=0 +attack_threshold=5 +pppoe_passwd_confirm= +dhcp_range=16 +log_send_etc=1 +d11g_frag=2346 +wl0_wds= +wl_rate=0 +pppoe_incom_1=0 +cctl=0 +log_level=1 +d11a_rts=2347 +filter_ident=0 +pppoe_incom_2=0 +ntp_server= +pppoe_incom_3=0 +wan_hwaddr= +pppoe_incom_4=0 +lan_ifnames=eth0 eth2 +wl_limit_select=0 +pppoe_ifname= +filter_wdssetup=0 +pppoe_auth_1=AUTO +wl0_auth=0 +wl0_mac_deny= +wl0_radius_port=1812 +pppoe_auth_2=AUTO +pppoe_auth_3=AUTO +wl0_radius_ipaddr= +pppoe_service= +pppoe_auth_4=AUTO +wl_country=Worldwide +pa0maxpwr=60 +attack_synfd_iplimit=5 +lcp_echo_interval=60 +wl_rateset=default +log_send_attack=0 +pppoe_retransmit_1=4 +http_passwd_confirm= +pppoe_retransmit_2=4 +pppoe_retransmit_3=4 +dhcp_start_melco=192.168.11.2 +pppoe_retransmit_4=4 +lan_ipaddr=192.168.11.100 +clkfreq=200 +os_name=linux +lan_proto=static +wl_radius_key= +aa0=3 +vlan1hwname=et0 +dns_manual0= +wl_unit=0 +filter_wanping=1 +dns_manual1= +wan_connecttime= +wl0_phytypes=g +d11a_bcn=100 +d11g_channel=11 +wl0_wep=off +wl0_frag=2346 +wins= +pppoe_incom=0 +pppoe_passwd= +pppoe_registered_1=0 +sdram_config=0x0032 +filter_nbt=0 +log_send_ntpcli=1 +melco_web_select= +pppoe_registered_2=0 +pppoe_registered_3=0 +wl0_country=Worldwide +vlan1ports=0 5 +dmz_ipaddr= +pppoe_registered_4=0 +wl_wds= +scratch=a0180000 +dns= +d11a_frag=2346 +ccode=0 +filter_ip= +melco_web_setuzoku=0 +wl0_rateset=default +attack_mail_to= +pppoe_idletime_1=20 +log_firewall=1 +pppoe_idletime_2=20 +lcp_echo_failure=6 +wl0_wep_bit=64 +pppoe_idletime=20 +pppoe_idletime_3=20 +log_server= +asts_enable=1 +pppoe_idletime_4=20 +lan_ifname=br0 +attack_mail_pop_pass= +boardflags=0x0188 +rip_wan_recv=0 +sdram_refresh=0x0000 +log_config=1 +wl0_afterburner_override=-1 +dhcp_domain= +wl_auth=0 +sdram_ncdl=0x20422 +filter_mac= +wl_frameburst=on +attack_cm_select=0 +filter_wlansetup=0 +log_forward=0 +wan_ipaddr=1.1.1.1 +forward_enable=1 +asts_sta_data= +wl0_passphrase= +gateway_manual= +lcp_echo_interval_1=60 +attack_mail_select=0 +attack_synfd_limit=0 +lcp_echo_interval_2=60 +wl0_rts=2347 +wl_ssid_mac=1 +pppoe_passwd_1= +lcp_echo_interval_3=60 +pppoe_passwd_2= +lcp_echo_interval_4=60 +wl_ifname=eth2 +wl_wep=off +pppoe_passwd_3= +d11b_dtim=1 +d11b_plcphdr=long +dhcp_gw_ip= +pppoe_passwd_4= +os_version=3.60.9.0 +wan_speed=AUTO +pppoe_username= +wl_gmode_protection=auto +gateway=0.0.0.0 +asts_deny_mac= +wl0_wpa_gtk_rekey=0 +log_dhcp_serv=0 +wl_frag=2346 +httpc_ipaddr= +wl0_key=1 +log_send_filter=1 +wl0_active_mac= +wl_maclist= +et0phyaddr=30 +console_loglevel=1 +time_zone=PST8PDT +d11a_rateset=default +d11g_shortslot_restrict=0 +wl_ssid_input= +wan_mdi=0 +pppoe_ac_name= +pppoe_passwd_confirm_1= +log_send_level_err=1 +log_send_firewall=1 +pppoe_passwd_confirm_2= +wan_ifname= +attack_mail_from= +pppoe_disable=0 +pppoe_passwd_confirm_3= +d11a_hwaddr= +rip_lan_recv=3 +ap_version=BUFFALO Ver.1.00 +pppoe_passwd_confirm_4= +wl_mac= +pppoe_service_1= +wl0_radio=1 +pppoe_service_2= +wl_channel=11 +d11g_hwaddr= +pppoe_service_3= +pppoe_service_4= +wl0_bcn=100 +dhcp_dns_select=AP +wl_wds_enable=0 +forward_udp= +wl_radio=1 +wl0_hwaddr=00:0D:0B:41:8A:C3 +d11b_rate=0 +forward_group= +rip_wan_send=0 +ap_hw_code=00 +wl0_wep_gen= +pa0b0=0x1136 +dhcp_lease_time=48 +log_wlcli=1 +wl0_gmode_protection=auto +pa0b1=0xfb93 +attack_dos_rules=0 +wl0_maclist= +pa0b2=0xfea5 +sdram_init=0x000a +wl_rts=2347 +log_send_wlcli=1 +pppoe_hostuniq= +ping_ipaddr=192.168.11.1 +vlan0hwname=et0 +dl_ram_addr=a0001000 +lan_hwnames=et0 wl0 +attack_mail_pop_user= +pppoe_registered=0 +pppoe_retransmit=4 +pppoe_demand=0 +pmon_upgrade_mode=0 +pppoe_ac_name_1= +wl0_radius_key= +pppoe_ac_name_2= +pppoe_ac_name_3= +wl0_corerev=7 +wl_key=1 +lan_speed=AUTO +pppoe_ac_name_4= +pppoe_mru=1454 +wl0_channel=11 +phytst=0 +pppoe_auth=AUTO +upnp_enable=1 +wl_ps=0 +product_name=Product_name +wl_closed=0 +wl0_auth_mode=disabled +wl0_crypto=tkip +boardnum=00 +attack_mail_smtp_addr= +boardtype_2=0 +wl_bcn=100 +d11b_rts=2347 +forward_tcp= +d11b_hwaddr= +rip_lan_send=0 diff --git a/hardware/buffalo/wla2-g54l/pci.txt b/hardware/buffalo/wla2-g54l/pci.txt new file mode 100644 index 0000000..2be1726 --- /dev/null +++ b/hardware/buffalo/wla2-g54l/pci.txt @@ -0,0 +1,37 @@ +PCI devices found: + Bus 0, device 0, function 0: + Class 0501: PCI device 14e4:0800 (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. + Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. + Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. + Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. + Bus 0, device 1, function 0: + Class 0280: PCI device 14e4:4320 (rev 1). + IRQ 4. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. + Bus 0, device 2, function 0: + Class 0200: PCI device 14e4:4713 (rev 1). + IRQ 5. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. + Bus 0, device 3, function 0: + Class 0c03: PCI device 14e4:4717 (rev 1). + IRQ 6. + Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. + Bus 0, device 4, function 0: + Class 0c03: PCI device 14e4:4716 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. + Bus 0, device 5, function 0: + Class 0b30: PCI device 14e4:0816 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. + Bus 0, device 6, function 0: + Class 0500: PCI device 14e4:080f (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. + Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. + Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. + Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. diff --git a/hardware/linksys/wrt54g_v11/cpuinfo.txt b/hardware/linksys/wrt54g_v11/cpuinfo.txt new file mode 100644 index 0000000..b3cfcfb --- /dev/null +++ b/hardware/linksys/wrt54g_v11/cpuinfo.txt @@ -0,0 +1,16 @@ +system type : Broadcom BCM947XX +processor : 0 +cpu model : BCM4710 V0.0 +BogoMIPS : 82.94 +wait instruction : no +microsecond timers : yes +tlb_entries : 32 +extra interrupt vector : no +hardware watchpoint : no +VCED exceptions : not available +VCEI exceptions : not available +dcache hits : 2866936757 +dcache misses : 57830034 +icache hits : 1724839356 +icache misses : 431170605 +instructions : 2156850242 diff --git a/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt b/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt new file mode 100644 index 0000000..58e5ce5 --- /dev/null +++ b/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt @@ -0,0 +1,96 @@ +CPU revision is: 00024000 +Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. +Primary data cache 4kB, 2-way, linesize 16 bytes. +Linux version 2.4.29 (nthill@mr-grey) (gcc version 3.3.5) #1 Tue Mar 1 19:49:53 CET 2005 +Determined physical RAM map: + memory: 01000000 @ 00000000 (usable) +On node 0 totalpages: 4096 +zone(0): 4096 pages. +zone(1): 0 pages. +zone(2): 0 pages. +Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200 +CPU: BCM4710 rev 0 at 125 MHz +Using 62.400 MHz high precision timer. +!unable to setup serial console! +Calibrating delay loop... 82.94 BogoMIPS +Memory: 14044k/16384k available (1485k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem) +Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) +Inode cache hash table entries: 1024 (order: 1, 8192 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) +Page-cache hash table entries: 4096 (order: 2, 16384 bytes) +Checking for 'wait' instruction... unavailable. +POSIX conformance testing by UNIFIX +PCI: Fixing up bus 0 +PCI: Fixing up bridge +PCI: Setting latency timer of device 01:00.0 to 64 +PCI: Fixing up bus 1 +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. +Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher +pty: 256 Unix98 ptys configured +Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled +Software Watchdog Timer: 0.05, timer margin: 60 sec +loop: loaded (max 8 devices) +PPP generic driver version 2.4.2 + Amd/Fujitsu Extended Query Table v1.1 at 0x0040 +Physically mapped flash: Swapping erase regions for broken CFI table. +number of CFI chips: 1 +cfi_cmdset_0002: Disabling fast programming due to code brokenness. +Flash device: 0x400000 at 0x1fc00000 +Creating 5 MTD partitions on "Physically mapped flash": +0x00000000-0x00040000 : "pmon" +0x00040000-0x003f0000 : "linux" +0x000edd94-0x001fd000 : "rootfs" +mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only +0x003f0000-0x00400000 : "nvram" +0x00200000-0x003f0000 : "OpenWrt" +sflash: chipcommon not found +Initializing Cryptographic API +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 512 buckets, 4Kbytes +TCP: Hash tables configured (established 1024 bind 2048) +ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack +ip_tables: (C) 2000-2002 Netfilter core team +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +NET4: Ethernet Bridge 008 for NET4.0 +Bridge firewalling registered +802.1Q VLAN Support v1.8 Ben Greear +All bugs added by David S. Miller +VFS: Mounted root (squashfs filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 100k freed +Warning: unable to open an initial console. +Algorithmics/MIPS FPU Emulator v1.5 +diag boardtype: 0000041a +using v1 hardware +jffs2.bbc: SIZE compression mode activated. +PCI: Setting latency timer of device 00:02.0 to 64 +5325E phy=FFFFFFFF +eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 00:08.0 to 64 +5325E phy=FFFFFFFF +eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 01:08.0 to 64 +PCI: Enabling device 01:08.0 (0004 -> 0006) +eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 +device eth0 entered promiscuous mode +vlan2: add 01:00:5e:00:00:01 mcast address to master interface +device eth1 entered promiscuous mode +device eth2 entered promiscuous mode +br0: port 3(eth2) entering learning state +br0: port 2(eth1) entering learning state +br0: port 1(vlan2) entering learning state +br0: port 3(eth2) entering forwarding state +br0: topology change detected, propagating +br0: port 2(eth1) entering forwarding state +br0: topology change detected, propagating +br0: port 1(vlan2) entering forwarding state +br0: topology change detected, propagating +vlan1: add 01:00:5e:00:00:01 mcast address to master interface diff --git a/hardware/linksys/wrt54g_v11/ifconfig.txt b/hardware/linksys/wrt54g_v11/ifconfig.txt new file mode 100644 index 0000000..a47a11b --- /dev/null +++ b/hardware/linksys/wrt54g_v11/ifconfig.txt @@ -0,0 +1,54 @@ +br0 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 + inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:6022 errors:0 dropped:0 overruns:0 frame:0 + TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:356276 (347.9 KiB) TX bytes:457411 (446.6 KiB) + +eth0 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 + UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 + RX packets:6204 errors:0 dropped:0 overruns:0 frame:0 + TX packets:5774 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:1000 + RX bytes:514297 (502.2 KiB) TX bytes:484047 (472.7 KiB) + Interrupt:3 Base address:0x2000 + +eth1 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:56 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:66 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:1000 + RX bytes:0 (0.0 B) TX bytes:7209 (7.0 KiB) + Interrupt:4 Base address:0x8000 + +eth2 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:57 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:2202 + TX packets:93 errors:36 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:1000 + RX bytes:0 (0.0 B) TX bytes:11951 (11.6 KiB) + Interrupt:6 Base address:0x2000 + +lo Link encap:Local Loopback + inet addr:127.0.0.1 Mask:255.0.0.0 + UP LOOPBACK RUNNING MTU:16436 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) + +vlan1 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:181 errors:0 dropped:0 overruns:0 frame:0 + TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:19634 (19.1 KiB) TX bytes:3564 (3.4 KiB) + +vlan2 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:6023 errors:0 dropped:0 overruns:0 frame:0 + TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:382991 (374.0 KiB) TX bytes:480483 (469.2 KiB) + diff --git a/hardware/linksys/wrt54g_v11/info.txt b/hardware/linksys/wrt54g_v11/info.txt new file mode 100644 index 0000000..2bd458d --- /dev/null +++ b/hardware/linksys/wrt54g_v11/info.txt @@ -0,0 +1,23 @@ +Linksys WRT54G v1.1 + +Online Description from Linksys: +http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601 + +CPU: BCM4710 at 125 MHz +RAM: 16 MB +Flash: 4 MB (AMD AM29LV320DT 2 M x 16-Bit) +1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller +1 Broadcom BCM4320 802.11 Wireless Controller +1 Infineon-ADMtek ADM6996L 5-ports Ethernet swith +serial port possible (but not used) +JTAG interface available (but not used) + +List of files: +nvram.txt: contents of NVRAM after 'mtd erase' and OpenWRT upgrade +cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) +pci.txt: contents of /proc/pci (2.4.29) +dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 +lspci-vv.txt: output of lspci -vv -P ./proc/bus/pci (deported) + +-- +Nico diff --git a/hardware/linksys/wrt54g_v11/lspci-vv.txt b/hardware/linksys/wrt54g_v11/lspci-vv.txt new file mode 100644 index 0000000..d58a02b --- /dev/null +++ b/hardware/linksys/wrt54g_v11/lspci-vv.txt @@ -0,0 +1,92 @@ +0000:00:00.0 RAM memory: Broadcom Corporation: Unknown device 0803 + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- (32-bit, non-prefetchable) [disabled] [size=128M] + Region 2: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=128M] + Region 3: Memory at 80000000 (32-bit, non-prefetchable) [disabled] [size=80000000] + Expansion ROM at [disabled] [size=2K] + +0000:00:01.0 Ethernet controller: Broadcom Corporation BCM47xx Sentry5 iLine32 HomePNA 2.0 + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] + +0000:00:02.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller + Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] + +0000:00:03.0 Modem: Broadcom Corporation Sentry5 UART (prog-if 00 [Generic]) + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] + +0000:00:04.0 USB Controller: Broadcom Corporation Sentry5 USB Controller (prog-if 10 [OHCI]) + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] + +0000:00:05.0 PCI bridge: Broadcom Corporation Sentry5 PCI Bridge (prog-if 00 [Normal decode]) + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+ SERR+ [disabled] [size=2K] + BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- + +0000:00:06.0 MIPS: Broadcom Corporation Sentry5 MIPS32 CPU + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] + +0000:00:07.0 FLASH memory: Broadcom Corporation Sentry5 External Interface Core + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] + +0000:00:08.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller + Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] + +0000:01:00.0 Host bridge: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge (rev 01) + Subsystem: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- (32-bit, prefetchable) [size=128M] + +0000:01:08.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) + Subsystem: Tekram Technology Co.,Ltd.: Unknown device 1603 + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- +All bugs added by David S. Miller +VFS: Mounted root (jffs2 filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 88k freed +Algorithmics/MIPS FPU Emulator v1.5 +diag boardtype: 00000101 +using v2 hardware +jffs2.bbc: SIZE compression mode activated. +PCI: Setting latency timer of device 00:02.0 to 64 +5325E phy=FFFFFFFF +5325E VLAN programming for BCM5325E-MDIO I/F switch +eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 00:01.0 to 64 +eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 +device eth0 entered promiscuous mode +vlan0: add 01:00:5e:00:00:01 mcast address to master interface +device eth1 entered promiscuous mode +br0: port 2(eth1) entering learning state +br0: port 1(vlan0) entering learning state +br0: port 2(eth1) entering forwarding state +br0: topology change detected, propagating +br0: port 1(vlan0) entering forwarding state +br0: topology change detected, propagating +vlan1: Setting MAC address to 00 0a 48 06 82 50. +vlan1: add 01:00:5e:00:00:01 mcast address to master interface +device br0 entered promiscuous mode +device br0 left promiscuous mode +device br0 entered promiscuous mode +device br0 left promiscuous mode + diff --git a/hardware/linksys/wrt54g_v20/ifconfig.txt b/hardware/linksys/wrt54g_v20/ifconfig.txt new file mode 100644 index 0000000..97922e0 --- /dev/null +++ b/hardware/linksys/wrt54g_v20/ifconfig.txt @@ -0,0 +1,46 @@ +br0 Link encap:Ethernet HWaddr 00:0F:66:D3:11:8E + inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:370 errors:0 dropped:0 overruns:0 frame:0 + TX packets:232 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:22641 (22.1 KiB) TX bytes:37549 (36.6 KiB) + +eth0 Link encap:Ethernet HWaddr 00:0F:66:D3:11:8E + UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 + RX packets:110 errors:0 dropped:0 overruns:0 frame:0 + TX packets:548 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:1000 + RX bytes:23978 (23.4 KiB) TX bytes:69928 (68.2 KiB) + Interrupt:5 Base address:0x2000 + +eth1 Link encap:Ethernet HWaddr 00:0F:66:D3:11:90 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:479 errors:0 dropped:0 overruns:0 frame:2 + TX packets:407 errors:4 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:1000 + RX bytes:37211 (36.3 KiB) TX bytes:73096 (71.3 KiB) + Interrupt:4 Base address:0x1000 + +lo Link encap:Local Loopback + inet addr:127.0.0.1 Mask:255.0.0.0 + UP LOOPBACK RUNNING MTU:16436 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) + +vlan0 Link encap:Ethernet HWaddr 00:0F:66:D3:11:8E + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:110 errors:0 dropped:0 overruns:0 frame:0 + TX packets:276 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:21998 (21.4 KiB) TX bytes:29605 (28.9 KiB) + +vlan1 Link encap:Ethernet HWaddr 00:0F:66:D3:11:8E + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:272 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:0 (0.0 B) TX bytes:40323 (39.3 KiB) + diff --git a/hardware/linksys/wrt54g_v20/info.txt b/hardware/linksys/wrt54g_v20/info.txt new file mode 100644 index 0000000..8278e09 --- /dev/null +++ b/hardware/linksys/wrt54g_v20/info.txt @@ -0,0 +1,19 @@ +Linksys WRT54G v2.0 + +Online Description from Linksys: +http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601 + +CPU: BCM4712 at 200 MHz +RAM: 16 MB (32MB on the XH models, please check http://openwrt.org/forum/viewtopic.php?t=731) +Flash: 4 MB +1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller +1 Broadcom BCM4320 802.11 Wireless Controller +serial port possible +JTAG interface + +List of files: +nvram.txt: contents of NVRAM after OpenWRT upgrade +cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) +ifconfig.txt: output of ifconfig (2.4.29) +pci.txt: contents of /proc/pci (2.4.29) +dmesg-2_4_29.txt: dmesg (XH model, 2.4.29) diff --git a/hardware/linksys/wrt54g_v20/nvram.txt b/hardware/linksys/wrt54g_v20/nvram.txt new file mode 100644 index 0000000..6c37ad6 --- /dev/null +++ b/hardware/linksys/wrt54g_v20/nvram.txt @@ -0,0 +1,113 @@ +wl0_net_mode=mixed +os_ram_addr=80001000 +wl0_frameburst=on +il0macaddr=00:0f:66:d3:11:90 +boardrev=0x10 +et0macaddr=00:0F:66:D3:11:8E +wl0_wep_buf= +watchdog=5000 +boot_wait=on +wl0_macmode1=disabled +wl0_infra=1 +wl0_country_code=AU +et0mdcport=0 +wl0_ap_ssid= +pmon_ver=CFE 3.51.21.0 +wl0_ifname=eth1 +gpio2=adm_eecs +gpio3=adm_eesk +ifnames=vlan0 vlan1 +vlan0ports=1 2 3 4 5* +gpio5=adm_eedi +gpio6=adm_rc +wl0_mrate=0 +wl0_mode=ap +wl0_ap_isolate=0 +os_flash_addr=bfc40000 +wl0_gmode=1 +sromrev=2 +boardtype=0x0101 +wl0_wep_last= +lan_netmask=255.255.255.0 +wl0_dtim=1 +wl0_ssid=b0rken +wl0_key1= +wl0id=0x4320 +wl0_key2= +wl0_key3= +wl0_key4= +wl_auth_mode=open +ag0=255 +wl0_plcphdr=long +wl0_rate=0 +wl0_closed=1 +wl0_macmode=disabled +wl0_radioids=BCM2050 +wl0_phytype=g +wl0gpio2=0 +wl0_lazywds=1 +wl0gpio3=0 +boardflags2=0 +wl0_afterburner=auto +lan_hwaddr=00:0F:66:D3:11:8E +wl0_antdiv=-1 +wl0_mac_list= +wl0_unit=0 +wl_country_code=AU +pa0itssit=62 +wl0_wds= +cctl=0 +lan_ifnames=vlan0 vlan1 eth1 +wl0_radius_port=1812 +wl0_mac_deny= +wl0_auth=0 +wl0_radius_ipaddr= +pa0maxpwr=0x48 +wan_ifnames=vlan1 +wl_crypto=tkip +lan_proto=static +lan_ipaddr=192.168.1.1 +clkfreq=200 +aa0=3 +vlan1hwname=et0 +wl0_phytypes=g +wl0_frag=2346 +wl0_wep=disabled +sdram_config=0x0032 +wl0_country=Worldwide +vlan1ports=0 5 +scratch=a0180000 +ccode=0 +wl0_rateset=default +wl0_wep_bit=64 +lan_ifname=br0 +boardflags=0x0188 +wl0_afterburner_override=-1 +sdram_refresh=0x0000 +sdram_ncdl=0x25 +wl0_passphrase= +wl0_rts=2347 +wl_wep=disabled +wl0_wpa_gtk_rekey=3600 +wl0_key=1 +wl0_active_mac= +et0phyaddr=30 +wl0_radio=1 +wl0_bcn=100 +wl0_hwaddr=00:0F:66:D3:11:90 +wl0_wep_gen= +wl0_gmode_protection=auto +pa0b0=0x170c +wl0_maclist= +pa0b1=0xfa24 +pa0b2=0xfe70 +sdram_init=0x0000 +vlan0hwname=et0 +dl_ram_addr=a0001000 +wl0_radius_key= +wl0_corerev=7 +wl0_channel=6 +wl0_auth_mode=open +boot_ver=v2.3 +boardnum=42 +wl0_ap_ip= diff --git a/hardware/linksys/wrt54g_v20/pci.txt b/hardware/linksys/wrt54g_v20/pci.txt new file mode 100644 index 0000000..cd7aafc --- /dev/null +++ b/hardware/linksys/wrt54g_v20/pci.txt @@ -0,0 +1,37 @@ +PCI devices found: + Bus 0, device 0, function 0: + Class 0501: PCI device 14e4:0800 (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. + Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. + Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. + Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. + Bus 0, device 1, function 0: + Class 0280: PCI device 14e4:4320 (rev 1). + IRQ 4. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. + Bus 0, device 2, function 0: + Class 0200: PCI device 14e4:4713 (rev 1). + IRQ 5. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. + Bus 0, device 3, function 0: + Class 0c03: PCI device 14e4:4717 (rev 1). + IRQ 6. + Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. + Bus 0, device 4, function 0: + Class 0c03: PCI device 14e4:4716 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. + Bus 0, device 5, function 0: + Class 0b30: PCI device 14e4:0816 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. + Bus 0, device 6, function 0: + Class 0500: PCI device 14e4:080f (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. + Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. + Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. + Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. diff --git a/hardware/linksys/wrt54g_v22/cpuinfo.txt b/hardware/linksys/wrt54g_v22/cpuinfo.txt new file mode 100644 index 0000000..dd54f9c --- /dev/null +++ b/hardware/linksys/wrt54g_v22/cpuinfo.txt @@ -0,0 +1,16 @@ +system type : Broadcom BCM947XX +processor : 0 +cpu model : BCM3302 V0.7 +BogoMIPS : 199.06 +wait instruction : no +microsecond timers : yes +tlb_entries : 32 +extra interrupt vector : no +hardware watchpoint : no +VCED exceptions : not available +VCEI exceptions : not available +dcache hits : 4244635257 +dcache misses : 1073741821 +icache hits : 4181718158 +icache misses : 4080970363 +instructions : 0 diff --git a/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt b/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt new file mode 100644 index 0000000..ee7151d --- /dev/null +++ b/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt @@ -0,0 +1,117 @@ +CPU revision is: 00029007 +Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. +Primary data cache 4kB, 2-way, linesize 16 bytes. +Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Thu Feb 17 23:51:07 CET 2005 +Determined physical RAM map: +memory: 01000000 @ 00000000 (usable) +On node 0 totalpages: 4096 +zone(0): 4096 pages. +zone(1): 0 pages. +zone(2): 0 pages. +Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200 +CPU: BCM4712 rev 1 at 200 MHz +Using 100.000 MHz high precision timer. +Calibrating delay loop... 199.06 BogoMIPS +Memory: 14044k/16384k available (1474k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem) +Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) +Inode cache hash table entries: 1024 (order: 1, 8192 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) +Page-cache hash table entries: 4096 (order: 2, 16384 bytes) +Checking for 'wait' instruction... unavailable. +POSIX conformance testing by UNIFIX +PCI: Disabled +PCI: Fixing up bus 0 +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. +Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher +pty: 256 Unix98 ptys configured +Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled +ttyS00 at 0xb8000300 (irq = 3) is a 16550A +ttyS01 at 0xb8000400 (irq = 0) is a 16550A +Software Watchdog Timer: 0.05, timer margin: 60 sec +loop: loaded (max 8 devices) +PPP generic driver version 2.4.2 +Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 +cfi_cmdset_0001: Erase suspend on write enabled +0: offset=0x0,size=0x2000,blocks=8 +1: offset=0x10000,size=0x10000,blocks=63 +Using word write method +Flash device: 0x400000 at 0x1c000000 +Physically mapped flash: squashfs filesystem found at block 946 +Creating 5 MTD partitions on "Physically mapped flash": +0x00000000-0x00040000 : "pmon" +0x00040000-0x003f0000 : "linux" +0x000ec990-0x001ceb48 : "rootfs" +mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only +0x003f0000-0x00400000 : "nvram" +0x001d0000-0x003f0000 : "OpenWrt" +sflash: found no supported devices +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 512 buckets, 4Kbytes +TCP: Hash tables configured (established 1024 bind 2048) +ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack +ip_tables: (C) 2000-2002 Netfilter core team +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +NET4: Ethernet Bridge 008 for NET4.0 +Bridge firewalling registered +802.1Q VLAN Support v1.8 Ben Greear +All bugs added by David S. Miller +VFS: Mounted root (squashfs filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 100k freed +Algorithmics/MIPS FPU Emulator v1.5 +diag boardtype: 00000708 +using v1 hardware +led -> 00 +led -> 01 +jffs2.bbc: SIZE compression mode activated. +PCI: Setting latency timer of device 00:02.0 to 64 +5325E phy=0 +5325E VLAN programming for BCM5325E-MDIO I/F switch +1:(0x00) value=0x0000 +2:(0x00) value=0x0000 +1:(0x13) value=0x001e +2:(0x13) value=0x001e +1:(0x00) value=0x0000 +2:(0x00) value=0x0000 +1:(0x13) value=0x001e +2:(0x13) value=0x001e +1:(0x00) value=0x0000 +2:(0x00) value=0x0000 +1:(0x13) value=0x001e +2:(0x13) value=0x001e +1:(0x00) value=0x0000 +2:(0x00) value=0x0000 +1:(0x13) value=0x001e +2:(0x13) value=0x001e +1:(0x00) value=0x0000 +2:(0x00) value=0x0000 +eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 00:01.0 to 64 +eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 +device eth0 entered promiscuous mode +vlan0: add 01:00:5e:00:00:01 mcast address to master interface +device eth1 entered promiscuous mode +br0: port 2(eth1) entering learning state +br0: port 1(vlan0) entering learning state +br0: port 2(eth1) entering forwarding state +br0: topology change detected, propagating +br0: port 1(vlan0) entering forwarding state +br0: topology change detected, propagating +vlan1: Setting MAC address to 00 12 17 cc cd 25. +vlan1: add 01:00:5e:00:00:01 mcast address to master interface +led -> 00 + diff --git a/hardware/linksys/wrt54g_v22/ifconfig.txt b/hardware/linksys/wrt54g_v22/ifconfig.txt new file mode 100644 index 0000000..48cbbe5 --- /dev/null +++ b/hardware/linksys/wrt54g_v22/ifconfig.txt @@ -0,0 +1,46 @@ +br0 Link encap:Ethernet HWaddr 00:12:17:CC:CD:24 + inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:125 errors:0 dropped:0 overruns:0 frame:0 + TX packets:97 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:5155 (5.0 KiB) TX bytes:22844 (22.3 KiB) + +eth0 Link encap:Ethernet HWaddr 00:12:17:CC:CD:24 + UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 + RX packets:125 errors:0 dropped:0 overruns:0 frame:0 + TX packets:97 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:1000 + RX bytes:8554 (8.3 KiB) TX bytes:23232 (22.6 KiB) + Interrupt:5 Base address:0x2000 + +eth1 Link encap:Ethernet HWaddr 00:12:17:CC:CD:26 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:3083 + TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:1000 + RX bytes:0 (0.0 B) TX bytes:50 (50.0 B) + Interrupt:4 Base address:0x1000 + +lo Link encap:Local Loopback + inet addr:127.0.0.1 Mask:255.0.0.0 + UP LOOPBACK RUNNING MTU:16436 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) + +vlan0 Link encap:Ethernet HWaddr 00:12:17:CC:CD:24 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:125 errors:0 dropped:0 overruns:0 frame:0 + TX packets:97 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:6304 (6.1 KiB) TX bytes:23232 (22.6 KiB) + +vlan1 Link encap:Ethernet HWaddr 00:12:17:CC:CD:25 + inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) diff --git a/hardware/linksys/wrt54g_v22/info.txt b/hardware/linksys/wrt54g_v22/info.txt new file mode 100644 index 0000000..e9b2ccd --- /dev/null +++ b/hardware/linksys/wrt54g_v22/info.txt @@ -0,0 +1,18 @@ +Linksys WRT54G v2.2 + +Online Description from Linksys: +http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601 + +CPU: BCM4712 at 200 MHz +RAM: 16 MB +Flash: 4 MB +1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller +1 Broadcom BCM4320 802.11 Wireless Controller +serial port possible +JTAG interface + +List of files: +nvram.txt: contents of NVRAM after OpenWRT upgrade +cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) +pci.txt: contents of /proc/pci (2.4.29) +dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 diff --git a/hardware/linksys/wrt54g_v22/nvram.txt b/hardware/linksys/wrt54g_v22/nvram.txt new file mode 100644 index 0000000..02c765e --- /dev/null +++ b/hardware/linksys/wrt54g_v22/nvram.txt @@ -0,0 +1,477 @@ + +Intel_firmware_version=v1.41.8 +QoS=0 +aa0=3 +action_service=start_ping +action_service_arg1= +ag0=255 +aol_block_traffic1=0 +aol_block_traffic2=0 +aol_block_traffic=0 +autofw_port0= +bcm4712_firmware_version=v1.50.0 +block_activex=0 +block_cookie=0 +block_java=0 +block_loopback=0 +block_proxy=0 +block_wan=1 +boardflags2=0 +boardflags=0x0118 +boardnum=42 +boardrev=0x10 +boardtype=0x0708 +boot_ver=v3.4 +boot_wait=on +bootnv_ver=2 +ccode=0 +cctl=0 +clkfreq=200 +console_loglevel=1 +ct_modules= +d11g_bcn=100 +d11g_channel=11 +d11g_dtim=1 +d11g_frag=2346 +d11g_mode=1 +d11g_rate=0 +d11g_rateset=default +d11g_rts=2347 +daylight_time=1 +ddns_cache= +ddns_change= +ddns_enable=0 +ddns_enable_buf= +ddns_hostname= +ddns_hostname_2= +ddns_hostname_buf= +ddns_interval=60 +ddns_passwd= +ddns_passwd_2= +ddns_passwd_buf= +ddns_status= +ddns_username= +ddns_username_2= +ddns_username_buf= +def_hwaddr=00:00:00:00:00:00 +dhcp_domain=wan +dhcp_lease=0 +dhcp_num=50 +dhcp_start=100 +dhcp_wins=wan +dl_ram_addr=a0001000 +dmz_enable=0 +dmz_ipaddr=0 +dr_lan_rx=0 +dr_lan_tx=0 +dr_setting=0 +dr_wan_rx=0 +dr_wan_tx=0 +eou_configured=1 +eou_device_id=CXLVVGWQ +eou_expired_hour=72 +eou_key_index=1 +eou_private_key=a752d99baa01b0889aee1c9bc9e49fd05a046e7183f9f21c21caa2bf832f341a98c2d2b6d299dd621cba5a02c7da6f36d5881cb29a0306483e63b74e3321b39c1b6e88d66ec200adbbc04412ae6a744bcf6530fdcfea8106e340c8012cadf32ddb37ff714c9588b1d0c141381433f1f0f96cabf9336002a87d39b24181193bf1 +eou_public_key=b1c8073564a1cb91249cfe658682e9cd5fa4b5589c39913de3e74ceb7b62275c424effe23fc37b383e85ffa2f458162a42e09e7dc3a336acc249f2c31653ced787dd8aae9eb3335c17569f2c17e677170ec9ad119ba6541065c760e096fd230e5ef4592e1dc2a9efbf564d666df5ac200b0c6dd96e2d33edb773f95cab4650c111 +et0macaddr=00:12:17:CC:CD:24 +et0mdcport=0 +et0phyaddr=30 +ezc_enable=1 +ezc_version=2 +filter=on +filter_client0= +filter_dport_grp10= +filter_dport_grp1= +filter_dport_grp2= +filter_dport_grp3= +filter_dport_grp4= +filter_dport_grp5= +filter_dport_grp6= +filter_dport_grp7= +filter_dport_grp8= +filter_dport_grp9= +filter_id=1 +filter_ip_grp10= +filter_ip_grp1= +filter_ip_grp2= +filter_ip_grp3= +filter_ip_grp4= +filter_ip_grp5= +filter_ip_grp6= +filter_ip_grp7= +filter_ip_grp8= +filter_ip_grp9= +filter_mac_grp10= +filter_mac_grp1= +filter_mac_grp2= +filter_mac_grp3= +filter_mac_grp4= +filter_mac_grp5= +filter_mac_grp6= +filter_mac_grp7= +filter_mac_grp8= +filter_mac_grp9= +filter_maclist= +filter_macmode=deny +filter_port= +filter_port_grp10= +filter_port_grp1= +filter_port_grp2= +filter_port_grp3= +filter_port_grp4= +filter_port_grp5= +filter_port_grp6= +filter_port_grp7= +filter_port_grp8= +filter_port_grp9= +filter_rule10= +filter_rule1= +filter_rule2= +filter_rule3= +filter_rule4= +filter_rule5= +filter_rule6= +filter_rule7= +filter_rule8= +filter_rule9= +filter_services=$NAME:003:DNS$PROT:003:udp$PORT:005:53:53< >$NAME:004:Ping$PROT:004:icmp$PORT:003:0:0< >$NAME:004:HTTP$PROT:003:tcp$PORT:005:80:80< >$NAME:005:HTTPS$PROT:003:tcp$PORT:007:443:443< >$NAME:003:FTP$PROT:003:tcp$PORT:005:21:21< >$NAME:004:POP3$PROT:003:tcp$PORT:007:110:110< >$NAME:004:IMAP$PROT:003:tcp$PORT:007:143:143< >$NAME:004:SMTP$PROT:003:tcp$PORT:005:25:25< >$NAME:004:NNTP$PROT:003:tcp$PORT:007:119:119< >$NAME:006:Telnet$PROT:003:tcp$PORT:005:23:23< >$NAME:004:SNMP$PROT:003:udp$PORT:007:161:161< >$NAME:004:TFTP$PROT:003:udp$PORT:005:69:69< >$NAME:003:IKE$PROT:003:udp$PORT:007:500:500< > +filter_tod10= +filter_tod1= +filter_tod2= +filter_tod3= +filter_tod4= +filter_tod5= +filter_tod6= +filter_tod7= +filter_tod8= +filter_tod9= +filter_tod_buf10= +filter_tod_buf1= +filter_tod_buf2= +filter_tod_buf3= +filter_tod_buf4= +filter_tod_buf5= +filter_tod_buf6= +filter_tod_buf7= +filter_tod_buf8= +filter_tod_buf9= +filter_web_host10= +filter_web_host1= +filter_web_host2= +filter_web_host3= +filter_web_host4= +filter_web_host5= +filter_web_host6= +filter_web_host7= +filter_web_host8= +filter_web_host9= +filter_web_url10= +filter_web_url1= +filter_web_url2= +filter_web_url3= +filter_web_url4= +filter_web_url5= +filter_web_url6= +filter_web_url7= +filter_web_url8= +filter_web_url9= +firmware_version=v3.03.1 +flash_type=Intel 28F320C3 2Mx16 BotB +forward_port= +fw_disable=0 +gpio5=robo_reset +hb_server_domain= +hb_server_ip= +http_client_ip=192.168.1.2 +http_client_mac=00:D0:59:9D:7C:8D +http_enable=1 +http_lanport=80 +http_method=post +http_passwd=admin +http_username= +http_wanport=8080 +https_enable=0 +ident_pass=0 +il0macaddr=00:12:17:cc:cd:26 +ipsec_pass=1 +is_default=0 +is_modified=1 +l2tp_get_ip= +l2tp_pass=1 +l2tp_server_ip= +lan_domain= +lan_hwaddr=00:12:17:CC:CD:24 +lan_hwnames= +lan_ifname=br0 +lan_ifnames=vlan0 eth1 eth2 eth3 +lan_ipaddr=192.168.1.1 +lan_lease=86400 +lan_netmask=255.255.255.0 +lan_proto=static +lan_stp=0 +lan_wins= +log_enable=0 +log_ipaddr=0 +log_level=0 +mac_clone_enable=0 +manual_rate=0 +mtu_enable=0 +multicast_pass=0 +ntp_mode=auto +ntp_server= +os_date=Oct 18 2004 +os_flash_addr=bfc40000 +os_name=linux +os_ram_addr=80001000 +os_server= +os_version=3.61.13.0 +pa0b0=0x15eb +pa0b1=0xfa82 +pa0b2=0xfe66 +pa0itssit=62 +pa0maxpwr=0x4e +ping_ip=;*/n${IFS}show>tmp/ping.log +ping_times=5 +pmon_ver=CFE 3.61.13.0 +port_flow_control_1=1 +port_flow_control_2=1 +port_flow_control_3=1 +port_flow_control_4=1 +port_priority_1=0 +port_priority_2=0 +port_priority_3=0 +port_priority_4=0 +port_rate_limit_1=0 +port_rate_limit_2=0 +port_rate_limit_3=0 +port_rate_limit_4=0 +port_trigger= +ppp_ac= +ppp_demand=1 +ppp_get_ac= +ppp_get_srv= +ppp_idletime=5 +ppp_keepalive=0 +ppp_mru=1500 +ppp_mtu=1500 +ppp_passwd= +ppp_redialperiod=30 +ppp_service= +ppp_static=0 +ppp_static_ip= +ppp_username= +pppoe_ac= +pppoe_demand=1 +pppoe_idletime=5 +pppoe_ifname= +pppoe_keepalive=0 +pppoe_passwd= +pppoe_service= +pppoe_static=0 +pppoe_static_ip= +pppoe_username= +pptp_get_ip= +pptp_pass=1 +pptp_server_ip= +qos_appname1= +qos_appname2= +qos_appname3= +qos_appport1=0 +qos_appport2=0 +qos_appport3=0 +qos_devmac1=00:00:00:00:00:00 +qos_devmac2=00:00:00:00:00:00 +qos_devname1= +qos_devname2= +qos_devpri1=0 +qos_devpri2=0 +rate_mode=1 +remote_management=0 +remote_mgt_https=0 +restore_defaults=0 +router_disable=0 +router_name=WRT54G +scratch=a0180000 +sdram_config=0x0062 +sdram_init=0x000b +sdram_ncdl=0xfd0009 +sdram_refresh=0x0000 +security_mode=disabled +security_mode_last= +sel_qosftp=0 +sel_qoshttp=0 +sel_qospop3=0 +sel_qosport1=0 +sel_qosport2=0 +sel_qosport3=0 +sel_qossmtp=0 +sel_qostelnet=0 +skip_amd_check=0 +skip_intel_check=0 +sromrev=2 +static_route= +static_route_name= +stats_server= +time_zone=-08 1 1 +timer_interval=30 +traceroute_ip= +upnp_enable=1 +upnp_wan_proto= +vlan0hwname=et0 +vlan0ports=1 2 3 4 5* +vlan1hwname=et0 +vlan1ports=0 5 +wan_dns= +wan_domain= +wan_gateway=10.0.0.254 +wan_gateway_buf=0.0.0.0 +wan_get_dns= +wan_get_domain= +wan_hostname= +wan_hwaddr=00:12:17:CC:CD:25 +wan_hwname= +wan_iface=vlan1 +wan_ifname=vlan1 +wan_ifnames=vlan1 +wan_ipaddr=10.0.0.1 +wan_ipaddr_buf=0.0.0.0 +wan_lease=0 +wan_mtu=1500 +wan_netmask=255.255.255.0 +wan_primary=1 +wan_proto=static +wan_run_mtu=1500 +wan_unit=0 +wan_wins= +watchdog=5000 +web_wl_filter=0 +wk_mode=gateway +wl0_active_mac= +wl0_afterburner=off +wl0_antdiv=-1 +wl0_ap_ip= +wl0_ap_isolate=0 +wl0_ap_ssid= +wl0_auth=0 +wl0_auth_mode=open +wl0_bcn=100 +wl0_channel=11 +wl0_closed=0 +wl0_corerev=7 +wl0_country=Worldwide +wl0_country_code=AU +wl0_crypto=tkip +wl0_dtim=1 +wl0_frag=2346 +wl0_frameburst=off +wl0_gmode=1 +wl0_gmode_protection=off +wl0_hwaddr=00:12:17:CC:CD:26 +wl0_ifname=eth1 +wl0_infra=1 +wl0_key1= +wl0_key2= +wl0_key3= +wl0_key4= +wl0_key=1 +wl0_lazywds=1 +wl0_mac_deny= +wl0_mac_list= +wl0_maclist= +wl0_macmode1=disabled +wl0_macmode=disabled +wl0_mode=ap +wl0_mrate=0 +wl0_net_mode=mixed +wl0_passphrase= +wl0_phytype=g +wl0_phytypes=g +wl0_plcphdr=long +wl0_radio=1 +wl0_radioids=BCM2050 +wl0_radius_ipaddr= +wl0_radius_key= +wl0_radius_port=1812 +wl0_rate=0 +wl0_rateset=default +wl0_rts=2347 +wl0_ssid=linksys +wl0_unit=0 +wl0_wds= +wl0_wep=disabled +wl0_wep_bit=64 +wl0_wep_buf= +wl0_wep_gen= +wl0_wep_last= +wl0_wpa_gtk_rekey=3600 +wl0_wpa_psk= +wl0gpio2=0 +wl0gpio3=0 +wl0id=0x4320 +wl_active_add_mac=0 +wl_active_mac= +wl_afterburner=off +wl_antdiv=-1 +wl_ap_ip= +wl_ap_isolate=0 +wl_ap_ssid= +wl_atten_bb=3 +wl_atten_ctl=48 +wl_atten_radio=4 +wl_auth=0 +wl_auth_mode=open +wl_bcn=100 +wl_cck= 3 +wl_channel=11 +wl_closed=0 +wl_corerev= +wl_country=Worldwide +wl_country_code=AU +wl_crypto=tkip +wl_delay=1 +wl_dtim=1 +wl_frag=2346 +wl_frameburst=off +wl_gmode=1 +wl_gmode_protection=off +wl_hwaddr= +wl_ifname= +wl_infra=1 +wl_key1= +wl_key2= +wl_key3= +wl_key4= +wl_key=1 +wl_lazywds=1 +wl_mac_deny= +wl_mac_list= +wl_maclist= +wl_macmode1=disabled +wl_macmode=disabled +wl_mode=ap +wl_mrate=0 +wl_net_mode=mixed +wl_ofdm= 0 +wl_passphrase= +wl_phytype=g +wl_phytypes= +wl_plcphdr=long +wl_radio=1 +wl_radioids= +wl_radius_ipaddr= +wl_radius_key= +wl_radius_port=1812 +wl_rate=0 +wl_rateset=default +wl_rts=2347 +wl_ssid=linksys +wl_tssi_result= 3 +wl_unit=0 +wl_wds= +wl_wep=disabled +wl_wep_bit=64 +wl_wep_buf= +wl_wep_gen= +wl_wep_last= +wl_wpa_gtk_rekey=3600 +wl_wpa_psk= diff --git a/hardware/linksys/wrt54g_v22/pci.txt b/hardware/linksys/wrt54g_v22/pci.txt new file mode 100644 index 0000000..2be1726 --- /dev/null +++ b/hardware/linksys/wrt54g_v22/pci.txt @@ -0,0 +1,37 @@ +PCI devices found: + Bus 0, device 0, function 0: + Class 0501: PCI device 14e4:0800 (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. + Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. + Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. + Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. + Bus 0, device 1, function 0: + Class 0280: PCI device 14e4:4320 (rev 1). + IRQ 4. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. + Bus 0, device 2, function 0: + Class 0200: PCI device 14e4:4713 (rev 1). + IRQ 5. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. + Bus 0, device 3, function 0: + Class 0c03: PCI device 14e4:4717 (rev 1). + IRQ 6. + Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. + Bus 0, device 4, function 0: + Class 0c03: PCI device 14e4:4716 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. + Bus 0, device 5, function 0: + Class 0b30: PCI device 14e4:0816 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. + Bus 0, device 6, function 0: + Class 0500: PCI device 14e4:080f (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. + Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. + Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. + Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. diff --git a/hardware/linksys/wrt54gs_v10/cpuinfo.txt b/hardware/linksys/wrt54gs_v10/cpuinfo.txt new file mode 100644 index 0000000..404c148 --- /dev/null +++ b/hardware/linksys/wrt54gs_v10/cpuinfo.txt @@ -0,0 +1,16 @@ +system type : Broadcom BCM947XX +processor : 0 +cpu model : BCM3302 V0.7 +BogoMIPS : 199.06 +wait instruction : no +microsecond timers : yes +tlb_entries : 32 +extra interrupt vector : no +hardware watchpoint : no +VCED exceptions : not available +VCEI exceptions : not available +dcache hits : 4278190076 +dcache misses : 1840115641 +icache hits : 4294967071 +icache misses : 4294967287 +instructions : 0 diff --git a/hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt b/hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt new file mode 100644 index 0000000..de5f8d8 --- /dev/null +++ b/hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt @@ -0,0 +1,88 @@ +CPU revision is: 00029007 +Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. +Primary data cache 4kB, 2-way, linesize 16 bytes. +Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Mon Feb 21 17:40:12 CET 2005 +Determined physical RAM map: +memory: 02000000 @ 00000000 (usable) +On node 0 totalpages: 8192 +zone(0): 8192 pages. +zone(1): 0 pages. +zone(2): 0 pages. +Kernel command line: root=/dev/mtdblock2 rootfstype=jffs2 init=/etc/preinit noinitrd console=ttyS0,115200 +CPU: BCM4712 rev 1 at 200 MHz +Using 100.000 MHz high precision timer. +Calibrating delay loop... 199.06 BogoMIPS +Memory: 30260k/32768k available (1477k kernel code, 2508k reserved, 100k data, 100k init, 0k highmem) +Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) +Inode cache hash table entries: 2048 (order: 2, 16384 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) +Page-cache hash table entries: 8192 (order: 3, 32768 bytes) +Checking for 'wait' instruction... unavailable. +POSIX conformance testing by UNIFIX +PCI: Disabled +PCI: Fixing up bus 0 +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. +Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher +pty: 256 Unix98 ptys configured +Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled +ttyS00 at 0xb8000300 (irq = 3) is a 16550A +ttyS01 at 0xb8000400 (irq = 0) is a 16550A +Software Watchdog Timer: 0.05, timer margin: 60 sec +loop: loaded (max 8 devices) +PPP generic driver version 2.4.2 +Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 +cfi_cmdset_0001: Erase suspend on write enabled +0: offset=0x0,size=0x20000,blocks=64 +Using buffer write method +Flash device: 0x800000 at 0x1c000000 +Creating 5 MTD partitions on "Physically mapped flash": +0x00000000-0x00040000 : "pmon" +0x00040000-0x007e0000 : "linux" +0x00100000-0x002a0000 : "rootfs" +0x007e0000-0x00800000 : "nvram" +0x002a0000-0x007e0000 : "OpenWrt" +sflash: found no supported devices +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 512 buckets, 4Kbytes +TCP: Hash tables configured (established 2048 bind 4096) +ip_conntrack version 2.1 (256 buckets, 2048 max) - 288 bytes per conntrack +ip_tables: (C) 2000-2002 Netfilter core team +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +NET4: Ethernet Bridge 008 for NET4.0 +Bridge firewalling registered +802.1Q VLAN Support v1.8 Ben Greear +All bugs added by David S. Miller +VFS: Mounted root (jffs2 filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 100k freed +Algorithmics/MIPS FPU Emulator v1.5 +diag boardtype: 00000101 +using v2 hardware +led -> 00 +led -> 01 +jffs2.bbc: SIZE compression mode activated. +PCI: Setting latency timer of device 00:02.0 to 64 +5325E phy=FFFFFFFF +eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 00:01.0 to 64 +eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 +device eth0 entered promiscuous mode +vlan0: add 01:00:5e:00:00:01 mcast address to master interface +device eth1 entered promiscuous mode +br0: port 2(eth1) entering learning state +br0: port 1(vlan0) entering learning state +br0: port 2(eth1) entering forwarding state +br0: topology change detected, propagating +br0: port 1(vlan0) entering forwarding state +br0: topology change detected, propagating +vlan1: add 01:00:5e:00:00:01 mcast address to master interface diff --git a/hardware/linksys/wrt54gs_v10/ifconfig.txt b/hardware/linksys/wrt54gs_v10/ifconfig.txt new file mode 100644 index 0000000..8e205ef --- /dev/null +++ b/hardware/linksys/wrt54gs_v10/ifconfig.txt @@ -0,0 +1,45 @@ +br0 Link encap:Ethernet HWaddr 00:0F:66:C8:74:44 + inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) + +eth0 Link encap:Ethernet HWaddr 00:0F:66:C8:74:44 + UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:66 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:1000 + RX bytes:0 (0.0 B) TX bytes:39204 (38.2 KiB) + Interrupt:5 Base address:0x2000 + +eth1 Link encap:Ethernet HWaddr 00:0F:66:C8:74:46 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:7245 + TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:1000 + RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) + Interrupt:4 Base address:0x1000 + +lo Link encap:Local Loopback + inet addr:127.0.0.1 Mask:255.0.0.0 + UP LOOPBACK RUNNING MTU:16436 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) + +vlan0 Link encap:Ethernet HWaddr 00:0F:66:C8:74:44 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) + +vlan1 Link encap:Ethernet HWaddr 00:0F:66:C8:74:44 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:66 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:0 (0.0 B) TX bytes:39204 (38.2 KiB) diff --git a/hardware/linksys/wrt54gs_v10/info.txt b/hardware/linksys/wrt54gs_v10/info.txt new file mode 100644 index 0000000..23c2271 --- /dev/null +++ b/hardware/linksys/wrt54gs_v10/info.txt @@ -0,0 +1,18 @@ +Linksys WRT54GS v1.0 + +Online Description from Linksys: +http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=610 + +CPU: BCM4712 at 200 MHz +RAM: 32 MB +Flash: 8 MB +1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller +1 Broadcom BCM4320 802.11 Wireless Controller +serial port possible +JTAG interface + +List of files: +nvram.txt: contents of NVRAM after nvram erase in CFE +cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) +pci.txt: contents of /proc/pci (2.4.29) +dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 diff --git a/hardware/linksys/wrt54gs_v10/nvram.txt b/hardware/linksys/wrt54gs_v10/nvram.txt new file mode 100644 index 0000000..bf70a4b --- /dev/null +++ b/hardware/linksys/wrt54gs_v10/nvram.txt @@ -0,0 +1,105 @@ +aa0=3 +ag0=255 +boardflags2=0 +boardflags=0x0388 +boardnum=42 +boardrev=0x10 +boardtype=0x0101 +boot_ver=v3.2 +boot_wait=yes +ccode=0 +cctl=0 +clkfreq=200 +dl_ram_addr=a0001000 +et0macaddr=00:0F:66:C8:74:44 +et0mdcport=0 +et0phyaddr=30 +gpio2=adm_eecs +gpio3=adm_eesk +gpio5=adm_eedi +gpio6=adm_rc +il0macaddr=00:0f:66:c8:74:46 +lan_ipaddr=192.168.1.1 +lan_netmask=255.255.255.0 +os_flash_addr=bfc40000 +os_ram_addr=80001000 +pa0b0=0x170c +pa0b1=0xfa24 +pa0b2=0xfe70 +pa0itssit=62 +pa0maxpwr=0x48 +pmon_ver=CFE 3.61.13.0 +scratch=a0180000 +sdram_config=0x0022 +sdram_init=0x0008 +sdram_ncdl=0x24 +sdram_refresh=0x0000 +sromrev=2 +vlan0hwname=et0 +vlan0ports=1 2 3 4 5* +vlan1hwname=et0 +vlan1ports=0 5 +watchdog=5000 +wl0_active_mac= +wl0_afterburner=auto +wl0_antdiv=-1 +wl0_ap_ip= +wl0_ap_isolate=0 +wl0_ap_ssid= +wl0_auth=0 +wl0_auth_mode=open +wl0_bcn=100 +wl0_channel=6 +wl0_closed=0 +wl0_corerev=7 +wl0_country=Worldwide +wl0_country_code=AU +wl0_crypto=tkip +wl0_dtim=1 +wl0_frag=2346 +wl0_frameburst=on +wl0_gmode=6 +wl0_gmode_protection=off +wl0_hwaddr=00:0F:66:C8:74:46 +wl0_ifname=eth1 +wl0_infra=1 +wl0_key1= +wl0_key2= +wl0_key3= +wl0_key4= +wl0_key=1 +wl0_lazywds=1 +wl0_mac_deny= +wl0_mac_list= +wl0_maclist= +wl0_macmode1=disabled +wl0_macmode=disabled +wl0_mode=ap +wl0_mrate=0 +wl0_net_mode=mixed +wl0_passphrase= +wl0_phytype=g +wl0_phytypes=g +wl0_plcphdr=long +wl0_radio=1 +wl0_radioids=BCM2050 +wl0_radius_ipaddr= +wl0_radius_key= +wl0_radius_port=1812 +wl0_rate=0 +wl0_rateset=default +wl0_rts=2347 +wl0_ssid=linksys +wl0_unit=0 +wl0_wds= +wl0_wep=disabled +wl0_wep_bit=64 +wl0_wep_buf= +wl0_wep_gen= +wl0_wep_last= +wl0_wpa_gtk_rekey=3600 +wl0_wpa_psk= +wl0gpio2=0 +wl0gpio3=0 +wl0id=0x4320 +wl_country_code=AU diff --git a/hardware/linksys/wrt54gs_v10/pci.txt b/hardware/linksys/wrt54gs_v10/pci.txt new file mode 100644 index 0000000..2be1726 --- /dev/null +++ b/hardware/linksys/wrt54gs_v10/pci.txt @@ -0,0 +1,37 @@ +PCI devices found: + Bus 0, device 0, function 0: + Class 0501: PCI device 14e4:0800 (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. + Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. + Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. + Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. + Bus 0, device 1, function 0: + Class 0280: PCI device 14e4:4320 (rev 1). + IRQ 4. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. + Bus 0, device 2, function 0: + Class 0200: PCI device 14e4:4713 (rev 1). + IRQ 5. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. + Bus 0, device 3, function 0: + Class 0c03: PCI device 14e4:4717 (rev 1). + IRQ 6. + Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. + Bus 0, device 4, function 0: + Class 0c03: PCI device 14e4:4716 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. + Bus 0, device 5, function 0: + Class 0b30: PCI device 14e4:0816 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. + Bus 0, device 6, function 0: + Class 0500: PCI device 14e4:080f (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. + Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. + Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. + Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. diff --git a/hardware/linksys/wrt54gs_v11/cpuinfo.txt b/hardware/linksys/wrt54gs_v11/cpuinfo.txt new file mode 100644 index 0000000..8a5ba8f --- /dev/null +++ b/hardware/linksys/wrt54gs_v11/cpuinfo.txt @@ -0,0 +1,11 @@ +system type : Broadcom BCM947XX +processor : 0 +cpu model : BCM3302 V0.7 +BogoMIPS : 215.44 +wait instruction : no +microsecond timers : yes +tlb_entries : 32 +extra interrupt vector : no +hardware watchpoint : no +VCED exceptions : not available +VCEI exceptions : not available diff --git a/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt b/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt new file mode 100644 index 0000000..22afd53 --- /dev/null +++ b/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt @@ -0,0 +1,83 @@ +CPU revision is: 00029007 +Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. +Primary data cache 4kB, 2-way, linesize 16 bytes. +Linux version 2.4.30 (kaloz@richese) (gcc version 3.4.3) #1 2005. máj. 20., péntek, 16.07.34 CEST +Determined physical RAM map: + memory: 02000000 @ 00000000 (usable) +On node 0 totalpages: 8192 +zone(0): 8192 pages. +zone(1): 0 pages. +zone(2): 0 pages. +Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200 +CPU: BCM4712 rev 1 at 216 MHz +Using 108.000 MHz high precision timer. +Calibrating delay loop... 215.44 BogoMIPS +Memory: 30256k/32768k available (1512k kernel code, 2512k reserved, 104k data, 88k init, 0k highmem) +Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) +Inode cache hash table entries: 2048 (order: 2, 16384 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) +Page-cache hash table entries: 8192 (order: 3, 32768 bytes) +Checking for 'wait' instruction... unavailable. +POSIX conformance testing by UNIFIX +PCI: Disabled +PCI: Fixing up bus 0 +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. +Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher +pty: 256 Unix98 ptys configured +Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled +ttyS00 at 0xb8000300 (irq = 3) is a 16550A +ttyS01 at 0xb8000400 (irq = 0) is a 16550A +Software Watchdog Timer: 0.05, timer margin: 60 sec +loop: loaded (max 8 devices) +Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 +cfi_cmdset_0001: Erase suspend on write enabled +0: offset=0x0,size=0x20000,blocks=64 +Using buffer write method +Flash device: 0x800000 at 0x1c000000 +Creating 4 MTD partitions on "Physically mapped flash": +0x00000000-0x00040000 : "pmon" +0x00040000-0x007e0000 : "linux" +0x000c0000-0x007e0000 : "rootfs" +0x007e0000-0x00800000 : "nvram" +Initializing Cryptographic API +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 512 buckets, 4Kbytes +TCP: Hash tables configured (established 2048 bind 4096) +ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack +ip_tables: (C) 2000-2002 Netfilter core team +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +NET4: Ethernet Bridge 008 for NET4.0 +Bridge firewalling registered +802.1Q VLAN Support v1.8 Ben Greear +All bugs added by David S. Miller +VFS: Mounted root (jffs2 filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 88k freed +Algorithmics/MIPS FPU Emulator v1.5 +diag boardtype: 00000708 +jffs2.bbc: SIZE compression mode activated. +b44.c:v0.93 (Mar, 2004) +PCI: Setting latency timer of device 00:02.0 to 64 +eth0: Broadcom 47xx 10/100BaseT Ethernet 00:13:10:07:ee:fc +PCI: Setting latency timer of device 00:01.0 to 64 +eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 +device eth0 entered promiscuous mode +vlan0: add 01:00:5e:00:00:01 mcast address to master interface +device eth1 entered promiscuous mode +br0: port 2(eth1) entering learning state +br0: port 1(vlan0) entering learning state +br0: port 2(eth1) entering forwarding state +br0: topology change detected, propagating +br0: port 1(vlan0) entering forwarding state +br0: topology change detected, propagating +vlan1: add 01:00:5e:00:00:01 mcast address to master interface diff --git a/hardware/linksys/wrt54gs_v11/info.txt b/hardware/linksys/wrt54gs_v11/info.txt new file mode 100644 index 0000000..325f4cd --- /dev/null +++ b/hardware/linksys/wrt54gs_v11/info.txt @@ -0,0 +1,21 @@ +Linksys WRT54GS v1.1 + +Online Description from Linksys: +http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=610 + +CPU: BCM4712 at 216 MHz +RAM: 32 MB +Flash: 8 MB +1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller +1 Broadcom BCM4320 802.11 Wireless Controller +serial port possible +JTAG interface + +List of files: +nvram.txt: contents of NVRAM after nvram erase and adjusted cpu speed +cpuinfo.txt: contents of /proc/cpuinfo with adjusted cpu speed (2.4.30) +pci.txt: contents of /proc/pci (2.4.30) +dmesg-2_4_30.txt: dmesg from Kernel 2.4.30 (using b44 and robocfg) + +Notes: +CPU runs at 200MHz default, You should adjust it to 216Mhz, as that fixes the problems during high network load. diff --git a/hardware/linksys/wrt54gs_v11/nvram.txt b/hardware/linksys/wrt54gs_v11/nvram.txt new file mode 100644 index 0000000..9baf982 --- /dev/null +++ b/hardware/linksys/wrt54gs_v11/nvram.txt @@ -0,0 +1,94 @@ +wl0_net_mode=mixed +os_ram_addr=80001000 +wl0_frameburst=off +boardrev=0x10 +il0macaddr=00:13:10:07:ee:fe +bootnv_ver=2 +et0macaddr=00:13:10:07:EE:FC +boot_wait=on +watchdog=5000 +wl0_infra=1 +wl0_country_code=AU +et0mdcport=0 +pmon_ver=CFE 3.61.13.0 +wl0_ifname=eth1 +gpio5=robo_reset +vlan0ports=1 2 3 4 5* +wl0_mode=ap +wl0_ap_isolate=0 +os_flash_addr=bfc40000 +wl0_gmode=6 +sromrev=2 +boardtype=0x0708 +lan_netmask=255.255.255.0 +wl0_dtim=1 +wl0_ssid=OpenWrt +wl0_key1= +wl0id=0x4320 +wl0_key2= +wl0_key3= +wl0_key4= +ag0=255 +wl0_plcphdr=long +wl0_rate=0 +wl0_closed=0 +wl0_macmode=disabled +wl0_radioids=BCM2050 +wl0_phytype=g +wl0gpio2=0 +wl0_lazywds=0 +wl0gpio3=0 +boardflags2=0 +wl0_afterburner=auto +wl0_antdiv=-1 +wl0_wpa_psk= +wl0_unit=0 +wl_country_code=AU +pa0itssit=62 +wl0_wds= +cctl=0 +wl0_radius_port=1812 +wl0_auth=0 +wl0_radius_ipaddr= +pa0maxpwr=0x4e +clkfreq=216 +lan_ipaddr=192.168.1.1 +vlan1hwname=et0 +aa0=3 +wl0_phytypes=g +wl0_frag=2346 +wl0_wep=disabled +sdram_config=0x0062 +wl0_country= +vlan1ports=0 5 +scratch=a0180000 +eou_private_key=3979dac822dd40eb1739886261d8c48fc437335ed9b2d851aba651c25718c2fd3e1a4607373b1e3570d5d79adafab37767853749eee724bb7b60d4ed1dae316144c33b1e39547f25d4e9a7b13df509a902f60e76d0db8f5089020b274792b4c39895fa45c88dfe73d544de5d0fed9ac1610309756c6632d2811a6a255769b0c9 +ccode=0 +wl0_rateset=default +eou_device_id=F7QVRQQK +boardflags=0x0318 +sdram_refresh=0x0000 +sdram_ncdl=0xff0007 +wl0_rts=2347 +wl0_wpa_gtk_rekey=3600 +wl0_key=1 +et0phyaddr=30 +wl0_radio=1 +wl0_bcn=100 +wl0_hwaddr=00:13:10:07:EE:FE +wl0_gmode_protection=auto +pa0b0=0x15eb +wl0_maclist= +pa0b1=0xfa82 +pa0b2=0xfe66 +sdram_init=0x000b +vlan0hwname=et0 +dl_ram_addr=a0001000 +wl0_radius_key= +wl0_corerev=7 +wl0_channel=11 +wl0_auth_mode=open +boot_ver=v3.4 +wl0_crypto=tkip +boardnum=42 +eou_public_key=c36b1b0edcf0431f4ef6cfb4e647691c01887b75b0f9ac48e1357c618e8763c36cbfbae5556299e8e60a4374e8879562c65e88c82c45167d70493a5964e9db1942bc4b73b6d3571249294298a429ca8b199b8f48e2df35ceff68aec2dee787a18167ddc78876cd179f26f016ab1d7722c7d284a76e42e0ebb3fb32d984e10b2b11 diff --git a/hardware/linksys/wrt54gs_v11/pci.txt b/hardware/linksys/wrt54gs_v11/pci.txt new file mode 100644 index 0000000..2be1726 --- /dev/null +++ b/hardware/linksys/wrt54gs_v11/pci.txt @@ -0,0 +1,37 @@ +PCI devices found: + Bus 0, device 0, function 0: + Class 0501: PCI device 14e4:0800 (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. + Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. + Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. + Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. + Bus 0, device 1, function 0: + Class 0280: PCI device 14e4:4320 (rev 1). + IRQ 4. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. + Bus 0, device 2, function 0: + Class 0200: PCI device 14e4:4713 (rev 1). + IRQ 5. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. + Bus 0, device 3, function 0: + Class 0c03: PCI device 14e4:4717 (rev 1). + IRQ 6. + Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. + Bus 0, device 4, function 0: + Class 0c03: PCI device 14e4:4716 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. + Bus 0, device 5, function 0: + Class 0b30: PCI device 14e4:0816 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. + Bus 0, device 6, function 0: + Class 0500: PCI device 14e4:080f (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. + Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. + Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. + Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. diff --git a/hardware/motorola/WR850Gv2/cpuinfo.txt b/hardware/motorola/WR850Gv2/cpuinfo.txt new file mode 100755 index 0000000..4e960e3 --- /dev/null +++ b/hardware/motorola/WR850Gv2/cpuinfo.txt @@ -0,0 +1,16 @@ +system type : Broadcom BCM947XX +processor : 0 +cpu model : BCM3302 V0.7 +BogoMIPS : 199.06 +wait instruction : no +microsecond timers : yes +tlb_entries : 32 +extra interrupt vector : no +hardware watchpoint : no +VCED exceptions : not available +VCEI exceptions : not available +dcache hits : 3472883705 +dcache misses : 2645294829 +icache hits : 4257216234 +icache misses : 4290730622 +instructions : 0 diff --git a/hardware/motorola/WR850Gv2/dmesg-2-4-29.txt b/hardware/motorola/WR850Gv2/dmesg-2-4-29.txt new file mode 100755 index 0000000..2d8b4b8 --- /dev/null +++ b/hardware/motorola/WR850Gv2/dmesg-2-4-29.txt @@ -0,0 +1,97 @@ +CPU revision is: 00029007 +Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. +Primary data cache 4kB, 2-way, linesize 16 bytes. +Linux version 2.4.29 (root@reboot2.lan) (gcc version 3.3.5) #1 Fri Mar 4 02:35:42 EST 2005 +Determined physical RAM map: + memory: 01000000 @ 00000000 (usable) +On node 0 totalpages: 4096 +zone(0): 4096 pages. +zone(1): 0 pages. +zone(2): 0 pages. +Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200 +CPU: BCM4712 rev 1 at 200 MHz +Using 100.000 MHz high precision timer. +Calibrating delay loop... 199.06 BogoMIPS +Memory: 14036k/16384k available (1482k kernel code, 2348k reserved, 100k data, 100k init, 0k highmem) +Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) +Inode cache hash table entries: 1024 (order: 1, 8192 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) +Page-cache hash table entries: 4096 (order: 2, 16384 bytes) +Checking for 'wait' instruction... unavailable. +POSIX conformance testing by UNIFIX +PCI: Disabled +PCI: Fixing up bus 0 +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. +Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher +pty: 256 Unix98 ptys configured +Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled +ttyS00 at 0xb8000300 (irq = 3) is a 16550A +ttyS01 at 0xb8000400 (irq = 0) is a 16550A +Software Watchdog Timer: 0.05, timer margin: 60 sec +loop: loaded (max 8 devices) +PPP generic driver version 2.4.2 +Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 +cfi_cmdset_0001: Erase suspend on write enabled +0: offset=0x0,size=0x20000,blocks=32 +Using buffer write method +Flash device: 0x400000 at 0x1c000000 +Creating 4 MTD partitions on "Physically mapped flash": +0x00000000-0x00040000 : "pmon" +0x00040000-0x003e0000 : "linux" +0x00100000-0x003e0000 : "rootfs" +0x003e0000-0x00400000 : "nvram" +sflash: found no supported devices +Initializing Cryptographic API +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 512 buckets, 4Kbytes +TCP: Hash tables configured (established 1024 bind 2048) +ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack +ip_tables: (C) 2000-2002 Netfilter core team +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +NET4: Ethernet Bridge 008 for NET4.0 +Bridge firewalling registered +802.1Q VLAN Support v1.8 Ben Greear +All bugs added by David S. Miller +cramfs: wrong magic +VFS: Mounted root (jffs2 filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 100k freed +Algorithmics/MIPS FPU Emulator v1.5 +diag boardtype: 00000101 +using v2 hardware +jffs2.bbc: SIZE compression mode activated. +PCI: Setting latency timer of device 00:02.0 to 64 +5325E phy=FFFFFFFF +eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 00:01.0 to 64 +eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 +device eth0 entered promiscuous mode +vlan0: add 01:00:5e:00:00:01 mcast address to master interface +device eth1 entered promiscuous mode +br0: port 2(eth1) entering learning state +br0: port 1(vlan0) entering learning state +br0: port 2(eth1) entering forwarding state +br0: topology change detected, propagating +br0: port 1(vlan0) entering forwarding state +br0: topology change detected, propagating +vlan1: add 01:00:5e:00:00:01 mcast address to master interface +br0: port 2(eth1) entering disabled state +br0: port 1(vlan0) entering disabled state +br0: port 2(eth1) entering disabled state +device eth1 left promiscuous mode +br0: port 1(vlan0) entering disabled state +device vlan0 left promiscuous mode diff --git a/hardware/motorola/WR850Gv2/ifconfig.txt b/hardware/motorola/WR850Gv2/ifconfig.txt new file mode 100755 index 0000000..9e61bc6 --- /dev/null +++ b/hardware/motorola/WR850Gv2/ifconfig.txt @@ -0,0 +1,39 @@ +eth0 Link encap:Ethernet HWaddr 00:11:22:33:44:55 + UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 + RX packets:32241 errors:0 dropped:0 overruns:0 frame:0 + TX packets:64392 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:1000 + RX bytes:2192583 (2.0 MiB) TX bytes:91374468 (87.1 MiB) + Interrupt:5 Base address:0x2000 + +eth1 Link encap:Ethernet HWaddr 00:90:4C:75:04:00 + inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:823 errors:0 dropped:0 overruns:0 frame:37474 + TX packets:753 errors:2 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:1000 + RX bytes:68341 (66.7 KiB) TX bytes:69022 (67.4 KiB) + Interrupt:4 Base address:0x1000 + +lo Link encap:Local Loopback + inet addr:127.0.0.1 Mask:255.0.0.0 + UP LOOPBACK RUNNING MTU:16436 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) + +vlan0 Link encap:Ethernet HWaddr 00:11:22:33:44:55 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:32241 errors:0 dropped:0 overruns:0 frame:0 + TX packets:64293 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:1612245 (1.5 MiB) TX bytes:91315662 (87.0 MiB) + +vlan1 Link encap:Ethernet HWaddr 00:11:22:33:44:55 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:99 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:0 (0.0 B) TX bytes:58806 (57.4 KiB) + diff --git a/hardware/motorola/WR850Gv2/nvram.txt b/hardware/motorola/WR850Gv2/nvram.txt new file mode 100755 index 0000000..24837d4 --- /dev/null +++ b/hardware/motorola/WR850Gv2/nvram.txt @@ -0,0 +1,52 @@ +boardtype=0x0101 +boardnum=44 +boardrev=0x10 +boardflags=0x0188 +boardflags2=0 +sromrev=2 +clkfreq=200 +sdram_init=0x0 +sdram_config=0x0032 +sdram_refresh=0x0000 +sdram_ncdl=0x21 +et0macaddr=00:11:22:33:44:55 +et0phyaddr=30 +et0mdcport=0 +et1macaddr=00:11:22:33:44:56 +gpio2=adm_eecs +gpio3=adm_eesk +gpio4=adm_eedi +gpio5=adm_rc +vlan0ports=0 1 2 3 5* +vlan0hwname=et0 +vlan1ports=4 5 +vlan1hwname=et0 +et1phyaddr=0x1f +wl0id=0x4320 +il0macaddr=00:90:4c:75:04:00 +aa0=3 +ag0=255 +pa0maxpwr=60 +pa0itssit=62 +pa0b0=0x119a +pa0b1=0xfb93 +pa0b2=0xfea5 +wl0gpio0=0 +wl0gpio1=0 +wl0gpio2=0 +wl0gpio3=0 +wlogpio4=0 +wl0gpio5=0 +cctl=0 +ccode=0 +dl_ram_addr=a0001000 +os_ram_addr=80001000 +os_flash_addr=bfc40000 +lan_ipaddr=192.168.1.1 +lan_netmask=255.255.255.0 +scratch=a0180000 +boot_wait=off +watchdog=0 +move_to_defaults=1 +CFEver=MotoWRv203 +flag_MAC=1 diff --git a/hardware/motorola/WR850Gv2/pci.txt b/hardware/motorola/WR850Gv2/pci.txt new file mode 100755 index 0000000..cd7aafc --- /dev/null +++ b/hardware/motorola/WR850Gv2/pci.txt @@ -0,0 +1,37 @@ +PCI devices found: + Bus 0, device 0, function 0: + Class 0501: PCI device 14e4:0800 (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. + Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. + Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. + Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. + Bus 0, device 1, function 0: + Class 0280: PCI device 14e4:4320 (rev 1). + IRQ 4. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. + Bus 0, device 2, function 0: + Class 0200: PCI device 14e4:4713 (rev 1). + IRQ 5. + Master Capable. Latency=64. + Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. + Bus 0, device 3, function 0: + Class 0c03: PCI device 14e4:4717 (rev 1). + IRQ 6. + Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. + Bus 0, device 4, function 0: + Class 0c03: PCI device 14e4:4716 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. + Bus 0, device 5, function 0: + Class 0b30: PCI device 14e4:0816 (rev 1). + IRQ 2. + Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. + Bus 0, device 6, function 0: + Class 0500: PCI device 14e4:080f (rev 1). + IRQ 3. + Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. + Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. + Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. + Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. diff --git a/hardware/soekris/net4801/cpuinfo.txt b/hardware/soekris/net4801/cpuinfo.txt new file mode 100644 index 0000000..6e9e9cb --- /dev/null +++ b/hardware/soekris/net4801/cpuinfo.txt @@ -0,0 +1,18 @@ +root@OpenWrt:/# cat /proc/cpuinfo  +processor : 0 +vendor_id : Geode by NSC +cpu family : 5 +model : 9 +model name : Unknown +stepping : 1 +cpu MHz : 266.650 +fdiv_bug : no +hlt_bug : no +f00f_bug : no +coma_bug : no +fpu : yes +fpu_exception : yes +cpuid level : 2 +wp : yes +flags : fpu tsc msr cx8 cmov mmx cxmmx +bogomips : 532.48 diff --git a/hardware/soekris/net4801/dmesg-2.4.30.txt b/hardware/soekris/net4801/dmesg-2.4.30.txt new file mode 100644 index 0000000..afde786 --- /dev/null +++ b/hardware/soekris/net4801/dmesg-2.4.30.txt @@ -0,0 +1,104 @@ +Linux version 2.4.30 (nthill@debian) (gcc version 3.4.4) #2 Sat Aug 13 01:30:32 CEST 2005 +BIOS-provided physical RAM map: + BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) + BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) + BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) + BIOS-e820: 0000000000100000 - 0000000008000000 (usable) + BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) +128MB LOWMEM available. +On node 0 totalpages: 32768 +zone(0): 4096 pages. +zone(1): 28672 pages. +zone(2): 0 pages. +DMI not present. +Kernel command line: blkmtd_device=/dev/hda2 root=/dev/mtdblock0 init=/etc/preinit noinitrd console=ttyS0,19200n8 +Initializing CPU#0 +Detected 266.650 MHz processor. +Calibrating delay loop... 532.48 BogoMIPS +Memory: 127284k/131072k available (1238k kernel code, 3400k reserved, 248k data, 80k init, 0k highmem) +Checking if this processor honours the WP bit even in supervisor mode... Ok. +Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) +Inode cache hash table entries: 8192 (order: 4, 65536 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 8192 (order: 3, 32768 bytes) +Page-cache hash table entries: 32768 (order: 5, 131072 bytes) +CPU: After generic, caps: 00808131 00818131 00000000 00000001 +CPU: Common caps: 00808131 00818131 00000000 00000001 +CPU: NSC Unknown stepping 01 +Checking 'hlt' instruction... OK. +POSIX conformance testing by UNIFIX +PCI: PCI BIOS revision 2.01 entry at 0xf7861, last bus=0 +PCI: Using configuration type 1 +PCI: Probing PCI hardware +PCI: Probing PCI hardware (bus 00) +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. +Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher +pty: 256 Unix98 ptys configured +Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled +ttyS00 at 0x03f8 (irq = 4) is a 16550A +ttyS01 at 0x02f8 (irq = 3) is a 16550A +Software Watchdog Timer: 0.05, timer margin: 60 sec +RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize +Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 +ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx +SC1200: IDE controller at PCI slot 00:12.2 +SC1200: chipset revision 1 +SC1200: not 100% native mode: will probe irqs later + ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio + ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio +hda: Transcend 256M, CFA DISK drive +hdb: HTS424030M9AT00, ATA DISK drive +SC1200: set xfer mode failure +hdb: sc1200_set_xfer_mode(UDMA 2) +blk: queue c02c421c, I/O limit 4095Mb (mask 0xffffffff) +ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 +hda: attached ide-disk driver. +hda: 500736 sectors (256 MB) w/2KiB Cache, CHS=978/16/32 +hdb: attached ide-disk driver. +hdb: host protected area => 1 +hdb: 58605120 sectors (30006 MB) w/1739KiB Cache, CHS=3648/255/63, UDMA(33) +Partition check: + /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 + /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 + /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 +blkmtd: mtd0: [/dev/hda2] erase_size = 128KiB +blkmtd: version 1.10 +Initializing Cryptographic API +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 1024 buckets, 8Kbytes +TCP: Hash tables configured (established 8192 bind 16384) +ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack +ip_tables: (C) 2000-2002 Netfilter core team +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +NET4: Ethernet Bridge 008 for NET4.0 +802.1Q VLAN Support v1.8 Ben Greear +All bugs added by David S. Miller +VFS: Mounted root (jffs2 filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 80k freed +jffs2.bbc: SIZE compression mode activated. +natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002 + originally by Donald Becker + http://www.scyld.com/network/natsemi.html + 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder +eth0: NatSemi DP8381[56] at 0xc88ab000, 00:00:24:c2:45:7c, IRQ 10. +eth1: NatSemi DP8381[56] at 0xc88ad000, 00:00:24:c2:45:7d, IRQ 10. +eth2: NatSemi DP8381[56] at 0xc88af000, 00:00:24:c2:45:7e, IRQ 10. +device eth0 entered promiscuous mode +eth0: link up. +eth0: Setting full-duplex based on negotiated link capability. +eth0: Promiscuous mode enabled. +eth0: Promiscuous mode enabled. +eth0: Promiscuous mode enabled. +eth0: Promiscuous mode enabled. +eth0: Promiscuous mode enabled. +br0: port 1(eth0) entering learning state +br0: port 1(eth0) entering forwarding state +br0: topology change detected, propagating diff --git a/hardware/soekris/net4801/info.txt b/hardware/soekris/net4801/info.txt new file mode 100644 index 0000000..94fbffb --- /dev/null +++ b/hardware/soekris/net4801/info.txt @@ -0,0 +1,19 @@ +Soekris Engineering net4801 + +Online Description from Linksys: +http://www.soekris.com/net4801.htm + +CPU: Geode SC1100 by NSC @ 266 Mhz +RAM: 128 MB +1 National Semiconductor DP8381 Ethernet Controler - 3 10/100 Mbps ports +1 CompactFLASH Type I/II socket +1 UltraDMA-33 interface (44 pins) for 2.5" HDD +1 Mini-PCI type III socket +1 PCI Slot (3.3V) +1 USB 1.1 port +2 serial ports (external DB9 and internal 10 pins header) + +List of files: +cpuinfo.txt: contents of /proc/cpuinfo (2.4.30) +pci.txt: contents of /proc/pci (2.4.30) +dmesg-2_4_30.txt: dmesg from Kernel 2.4.30 diff --git a/hardware/soekris/net4801/pci.txt b/hardware/soekris/net4801/pci.txt new file mode 100644 index 0000000..7a53166 --- /dev/null +++ b/hardware/soekris/net4801/pci.txt @@ -0,0 +1,40 @@ +PCI devices found: + Bus 0, device 0, function 0: + Class 0600: PCI device 1078:0001 (rev 0). + Bus 0, device 6, function 0: + Class 0200: PCI device 100b:0020 (rev 0). + IRQ 10. + Master Capable. Latency=63. Min Gnt=11.Max Lat=52. + I/O at 0xe100 [0xe1ff]. + Non-prefetchable 32 bit memory at 0xa0000000 [0xa0000fff]. + Bus 0, device 7, function 0: + Class 0200: PCI device 100b:0020 (rev 0). + IRQ 10. + Master Capable. Latency=63. Min Gnt=11.Max Lat=52. + I/O at 0xe200 [0xe2ff]. + Non-prefetchable 32 bit memory at 0xa0001000 [0xa0001fff]. + Bus 0, device 8, function 0: + Class 0200: PCI device 100b:0020 (rev 0). + IRQ 10. + Master Capable. Latency=63. Min Gnt=11.Max Lat=52. + I/O at 0xe300 [0xe3ff]. + Non-prefetchable 32 bit memory at 0xa0002000 [0xa0002fff]. + Bus 0, device 18, function 0: + Class 0601: PCI device 100b:0510 (rev 0). + Master Capable. Latency=63. + I/O at 0x6100 [0x613f]. + I/O at 0x6200 [0x623f]. + Bus 0, device 18, function 1: + Class 0680: PCI device 100b:0511 (rev 0). + I/O at 0x6300 [0x63ff]. + Bus 0, device 18, function 2: + Class 0101: PCI device 100b:0502 (rev 1). + I/O at 0xe000 [0xe00f]. + Bus 0, device 18, function 5: + Class 0680: PCI device 100b:0515 (rev 0). + I/O at 0x6500 [0x653f]. + Bus 0, device 19, function 0: + Class 0c03: PCI device 0e11:a0f8 (rev 8). + IRQ 11. + Master Capable. Latency=56. Max Lat=80. + Non-prefetchable 32 bit memory at 0xa0003000 [0xa0003fff]. -- 2.30.2