From 098cbc68ee23db589ed6f0d081fe26cc385462f2 Mon Sep 17 00:00:00 2001 From: Walter Sonius Date: Fri, 27 Dec 2019 12:41:35 +0100 Subject: [PATCH] brcm47xx: fix switch port order for Netgear WN2500RP V1 The Netgear WN2500RP V1 switch0 already works for LAN however the port order for the LAN ports is inverted. Correct physical port order watched from the back of the device is: 4 / 3 / 2 / 1 WAN port is absent on this device and therefore removed from switch config. Signed-off-by: Walter Sonius [move block to maintain alphabetic sorting] Signed-off-by: Adrian Schmutzler --- target/linux/brcm47xx/base-files/etc/board.d/01_network | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/target/linux/brcm47xx/base-files/etc/board.d/01_network b/target/linux/brcm47xx/base-files/etc/board.d/01_network index 99755700ff20..e6311d81397f 100755 --- a/target/linux/brcm47xx/base-files/etc/board.d/01_network +++ b/target/linux/brcm47xx/base-files/etc/board.d/01_network @@ -177,6 +177,11 @@ configure_by_model() { "0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "8@eth0" ;; + "Netgear WN2500RP V1") + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0" + ;; + *) configure_by_boardtype "$boardtype" "$boardnum" ;; -- 2.30.2