From 0988a7a1a98300e90a6613b33738e07cdf8ce786 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Fri, 15 Jan 2010 13:27:29 +0100 Subject: [PATCH] b43: N-PHY: update init code to match current specs MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/net/wireless/b43/phy_n.c | 201 +++++++++++++++++++++++++------ 1 file changed, 161 insertions(+), 40 deletions(-) diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index cb784a2504a6..c16c98538f65 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -419,75 +419,196 @@ static void b43_nphy_rssi_cal(struct b43_wldev *dev, u8 type) //TODO } +/* + * Init N-PHY + * http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N + */ int b43_phy_initn(struct b43_wldev *dev) { + struct ssb_bus *bus = dev->dev->bus; struct b43_phy *phy = &dev->phy; + struct b43_phy_n *nphy = phy->n; + u8 tx_pwr_state; + struct nphy_txgains target; u16 tmp; + enum ieee80211_band tmp2; + bool do_rssi_cal; + + u16 clip[2]; + bool do_cal = false; - //TODO: Spectral management + if ((dev->phy.rev >= 3) && + (bus->sprom.boardflags_lo & B43_BFL_EXTLNA) && + (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)) { + chipco_set32(&dev->dev->bus->chipco, SSB_CHIPCO_CHIPCTL, 0x40); + } + nphy->deaf_count = 0; b43_nphy_tables_init(dev); + nphy->crsminpwr_adjusted = false; + nphy->noisevars_adjusted = false; /* Clear all overrides */ - b43_phy_write(dev, B43_NPHY_RFCTL_OVER, 0); + if (dev->phy.rev >= 3) { + b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S1, 0); + b43_phy_write(dev, B43_NPHY_RFCTL_OVER, 0); + b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S0, 0); + b43_phy_write(dev, B43_NPHY_TXF_40CO_B32S1, 0); + } else { + b43_phy_write(dev, B43_NPHY_RFCTL_OVER, 0); + } b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, 0); b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, 0); - b43_phy_write(dev, B43_NPHY_RFCTL_INTC3, 0); - b43_phy_write(dev, B43_NPHY_RFCTL_INTC4, 0); + if (dev->phy.rev < 6) { + b43_phy_write(dev, B43_NPHY_RFCTL_INTC3, 0); + b43_phy_write(dev, B43_NPHY_RFCTL_INTC4, 0); + } b43_phy_mask(dev, B43_NPHY_RFSEQMODE, ~(B43_NPHY_RFSEQMODE_CAOVER | B43_NPHY_RFSEQMODE_TROVER)); + if (dev->phy.rev >= 3) + b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, 0); b43_phy_write(dev, B43_NPHY_AFECTL_OVER, 0); - tmp = (phy->rev < 2) ? 64 : 59; - b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3, - ~B43_NPHY_BPHY_CTL3_SCALE, - tmp << B43_NPHY_BPHY_CTL3_SCALE_SHIFT); - + if (dev->phy.rev <= 2) { + tmp = (dev->phy.rev == 2) ? 0x3B : 0x40; + b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3, + ~B43_NPHY_BPHY_CTL3_SCALE, + tmp << B43_NPHY_BPHY_CTL3_SCALE_SHIFT); + } b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_20M, 0x20); b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_40M, 0x20); - b43_phy_write(dev, B43_NPHY_TXREALFD, 184); - b43_phy_write(dev, B43_NPHY_MIMO_CRSTXEXT, 200); - b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 80); - b43_phy_write(dev, B43_NPHY_C2_BCLIPBKOFF, 511); + if (bus->sprom.boardflags2_lo & 0x100 || + (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE && + bus->boardinfo.type == 0x8B)) + b43_phy_write(dev, B43_NPHY_TXREALFD, 0xA0); + else + b43_phy_write(dev, B43_NPHY_TXREALFD, 0xB8); + b43_phy_write(dev, B43_NPHY_MIMO_CRSTXEXT, 0xC8); + b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 0x50); + b43_phy_write(dev, B43_NPHY_TXRIFS_FRDEL, 0x30); - //TODO MIMO-Config - //TODO Update TX/RX chain + /* TODO MIMO-Config */ + /* TODO Update TX/RX chain */ if (phy->rev < 2) { b43_phy_write(dev, B43_NPHY_DUP40_GFBL, 0xAA8); b43_phy_write(dev, B43_NPHY_DUP40_BL, 0x9A4); } + + tmp2 = b43_current_band(dev->wl); + if ((nphy->ipa2g_on && tmp2 == IEEE80211_BAND_2GHZ) || + (nphy->ipa5g_on && tmp2 == IEEE80211_BAND_5GHZ)) { + b43_phy_set(dev, B43_NPHY_PAPD_EN0, 0x1); + b43_phy_maskset(dev, B43_NPHY_EPS_TABLE_ADJ0, 0x007F, + nphy->papd_epsilon_offset[0] << 7); + b43_phy_set(dev, B43_NPHY_PAPD_EN1, 0x1); + b43_phy_maskset(dev, B43_NPHY_EPS_TABLE_ADJ1, 0x007F, + nphy->papd_epsilon_offset[1] << 7); + /* TODO N PHY IPA Set TX Dig Filters */ + } else if (phy->rev >= 5) { + /* TODO N PHY Ext PA Set TX Dig Filters */ + } + b43_nphy_workarounds(dev); - b43_nphy_reset_cca(dev); - ssb_write32(dev->dev, SSB_TMSLOW, - ssb_read32(dev->dev, SSB_TMSLOW) | B43_TMSLOW_MACPHYCLKEN); + /* Reset CCA, in init code it differs a little from standard way */ + /* b43_nphy_bmac_clock_fgc(dev, 1); */ + tmp = b43_phy_read(dev, B43_NPHY_BBCFG); + b43_phy_write(dev, B43_NPHY_BBCFG, tmp | B43_NPHY_BBCFG_RSTCCA); + b43_phy_write(dev, B43_NPHY_BBCFG, tmp & ~B43_NPHY_BBCFG_RSTCCA); + /* b43_nphy_bmac_clock_fgc(dev, 0); */ + + /* TODO N PHY MAC PHY Clock Set with argument 1 */ + + /* b43_nphy_pa_override(dev, false); */ b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RX2TX); b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX); + /* b43_nphy_pa_override(dev, true); */ + + /* b43_nphy_classifier(dev, 0, 0); */ + /* b43_nphy_read_clip_detection(dev, clip); */ + tx_pwr_state = nphy->txpwrctrl; + /* TODO N PHY TX power control with argument 0 + (turning off power control) */ + /* TODO Fix the TX Power Settings */ + /* TODO N PHY TX Power Control Idle TSSI */ + /* TODO N PHY TX Power Control Setup */ + + if (phy->rev >= 3) { + /* TODO */ + } else { + /* TODO Write an N PHY table with ID 26, length 128, offset 192, width 32, and the data from Rev 2 TX Power Control Table */ + /* TODO Write an N PHY table with ID 27, length 128, offset 192, width 32, and the data from Rev 2 TX Power Control Table */ + } - b43_phy_read(dev, B43_NPHY_CLASSCTL); /* dummy read */ - //TODO read core1/2 clip1 thres regs - - if (1 /* FIXME Band is 2.4GHz */) - b43_nphy_bphy_init(dev); - //TODO disable TX power control - //TODO Fix the TX power settings - //TODO Init periodic calibration with reason 3 - b43_nphy_rssi_cal(dev, 2); - b43_nphy_rssi_cal(dev, 0); - b43_nphy_rssi_cal(dev, 1); - //TODO get TX gain - //TODO init superswitch - //TODO calibrate LO - //TODO idle TSSI TX pctl - //TODO TX power control power setup - //TODO table writes - //TODO TX power control coefficients - //TODO enable TX power control - //TODO control antenna selection - //TODO init radar detection - //TODO reset channel if changed + if (nphy->phyrxchain != 3) + ;/* TODO N PHY RX Core Set State with phyrxchain as argument */ + if (nphy->mphase_cal_phase_id > 0) + ;/* TODO PHY Periodic Calibration Multi-Phase Restart */ + + do_rssi_cal = false; + if (phy->rev >= 3) { + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) + do_rssi_cal = (nphy->rssical_chanspec_2G == 0); + else + do_rssi_cal = (nphy->rssical_chanspec_5G == 0); + + if (do_rssi_cal) + ;/* b43_nphy_rssi_cal(dev); */ + else + ;/* b43_nphy_restore_rssi_cal(dev); */ + } else { + /* b43_nphy_rssi_cal(dev); */ + } + + if (!((nphy->measure_hold & 0x6) != 0)) { + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) + do_cal = (nphy->iqcal_chanspec_2G == 0); + else + do_cal = (nphy->iqcal_chanspec_5G == 0); + + if (nphy->mute) + do_cal = false; + + if (do_cal) { + /* target = b43_nphy_get_tx_gains(dev); */ + + if (nphy->antsel_type == 2) + ;/*TODO NPHY Superswitch Init with argument 1*/ + if (nphy->perical != 2) { + /* b43_nphy_rssi_cal(dev); */ + if (phy->rev >= 3) { + nphy->cal_orig_pwr_idx[0] = + nphy->txpwrindex[0].index_internal; + nphy->cal_orig_pwr_idx[1] = + nphy->txpwrindex[1].index_internal; + /* TODO N PHY Pre Calibrate TX Gain */ + /*target = b43_nphy_get_tx_gains(dev)*/ + } + } + } + } + + /* + if (!b43_nphy_cal_tx_iq_lo(dev, target, true, false)) { + if (b43_nphy_cal_rx_iq(dev, target, 2, 0) == 0) + Call N PHY Save Cal + else if (nphy->mphase_cal_phase_id == 0) + N PHY Periodic Calibration with argument 3 + } else { + b43_nphy_restore_cal(dev); + } + */ + + /* b43_nphy_tx_pwr_ctrl_coef_setup(dev); */ + /* TODO N PHY TX Power Control Enable with argument tx_pwr_state */ + b43_phy_write(dev, B43_NPHY_TXMACIF_HOLDOFF, 0x0015); + b43_phy_write(dev, B43_NPHY_TXMACDELAY, 0x0320); + if (phy->rev >= 3 && phy->rev <= 6) + b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 0x0014); + /* b43_nphy_tx_lp_fbw(dev); */ + /* TODO N PHY Spur Workaround */ b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n"); return 0; -- 2.30.2