From 0911d952631df97e5b69d816cceebcbccbca34cf Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Mon, 27 Aug 2018 15:59:06 +0530 Subject: [PATCH] board: ti: am654: a53: Add initial support for am654 Add initial support for AM654 based EVM running on A53. Enable 4GB of DDR available on the EVM so that kernel DTB file can be updated accordingly. Reviewed-by: Tom Rini Signed-off-by: Lokesh Vutla [Andreas: Added 4GB ddr support] Signed-off-by: Andreas Dannenberg --- arch/arm/mach-k3/Kconfig | 1 + board/ti/am65x/Kconfig | 28 +++++++ board/ti/am65x/MAINTAINERS | 5 ++ board/ti/am65x/Makefile | 8 ++ board/ti/am65x/README | 141 ++++++++++++++++++++++++++++++++++++ board/ti/am65x/evm.c | 56 ++++++++++++++ include/configs/am65x_evm.h | 34 +++++++++ 7 files changed, 273 insertions(+) create mode 100644 board/ti/am65x/Kconfig create mode 100644 board/ti/am65x/MAINTAINERS create mode 100644 board/ti/am65x/Makefile create mode 100644 board/ti/am65x/README create mode 100644 board/ti/am65x/evm.c create mode 100644 include/configs/am65x_evm.h diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig index 1380013fe7..2df6197af7 100644 --- a/arch/arm/mach-k3/Kconfig +++ b/arch/arm/mach-k3/Kconfig @@ -47,4 +47,5 @@ config SYS_K3_BOOT_PARAM_TABLE_INDEX Address at which ROM stores the value which determines if SPL is booted up by primary boot media or secondary boot media. +source "board/ti/am65x/Kconfig" endif diff --git a/board/ti/am65x/Kconfig b/board/ti/am65x/Kconfig new file mode 100644 index 0000000000..591600483e --- /dev/null +++ b/board/ti/am65x/Kconfig @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ +# Lokesh Vutla + +choice + prompt "K3 AM65 based boards" + optional + +config TARGET_AM654_A53_EVM + bool "TI K3 based AM654 EVM running on A53" + select ARM64 + select SOC_K3_AM6 + +endchoice + +if TARGET_AM654_A53_EVM + +config SYS_BOARD + default "am65x" + +config SYS_VENDOR + default "ti" + +config SYS_CONFIG_NAME + default "am65x_evm" + +endif diff --git a/board/ti/am65x/MAINTAINERS b/board/ti/am65x/MAINTAINERS new file mode 100644 index 0000000000..c5921b4a28 --- /dev/null +++ b/board/ti/am65x/MAINTAINERS @@ -0,0 +1,5 @@ +AM65x BOARD +M: Lokesh Vutla +S: Maintained +F: board/ti/am65x/ +F: include/configs/am65x_evm.h diff --git a/board/ti/am65x/Makefile b/board/ti/am65x/Makefile new file mode 100644 index 0000000000..94dddfcc4a --- /dev/null +++ b/board/ti/am65x/Makefile @@ -0,0 +1,8 @@ +# +# Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ +# Lokesh Vutla +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := evm.o diff --git a/board/ti/am65x/README b/board/ti/am65x/README new file mode 100644 index 0000000000..e7f4ff6578 --- /dev/null +++ b/board/ti/am65x/README @@ -0,0 +1,141 @@ +Introduction: +------------- +The AM65x family of SoCs is the first device family from K3 Multicore +SoC architecture, targeted for broad market and industrial control with +aim to meet the complex processing needs of modern embedded products. + +The device is built over three domains, each containing specific processing +cores, voltage domains and peripherals: +1. Wake-up (WKUP) domain: + - Device Management and Security Controller (DMSC) +2. Microcontroller (MCU) domain: + - Dual Core ARM Cortex-R5F processor +3. MAIN domain: + - Quad core 64-bit ARM Cortex-A53 + +More info can be found in TRM: http://www.ti.com/lit/pdf/spruid7 + +Boot Flow: +---------- +On AM65x family devices, ROM supports boot only via MCU(R5). This means that +bootloader has to run on R5 core. In order to meet this constraint, and for +the following reasons the boot flow is designed as mentioned: +1. Need to move away from R5 asap, so that we want to start *any* +firmware on the r5 cores like.... autosar can be loaded to receive CAN +response and other safety operations to be started. This operation is +very time critical and is applicable for all automotive use cases. +2. U-Boot on A53 should start other remotecores for various +applications. This should happen before running Linux. +3. In production boot flow, we might not like to use full u-boot, +instead use Flacon boot flow to reduce boot time. + ++------------------------------------------------------------------------+ +| DMSC | R5 | A53 | ++------------------------------------------------------------------------+ +| +--------+ | | | +| | Reset | | | | +| +--------+ | | | +| : | | | +| +--------+ | +-----------+ | | +| | *rom* |----------|-->| Reset rls | | | +| +--------+ | +-----------+ | | +| | | | : | | +| | rom | | : | | +| |services| | : | | +| | | | +-------------+ | | +| | | | | *R5 rom* | | | +| | | | +-------------+ | | +| | |<---------|---|Load and auth| | | +| | | | | tiboot3.bin | | | +| | | | +-------------+ | | +| | | | : | | +| | | | : | | +| | | | : | | +| | | | +-------------+ | | +| | Start | | | *R5 SPL* | | | +| | System | | +-------------+ | | +| |Firmware|<---------|---|Load and auth| | | +| +--------+ | | sysfw bin | | | +| : | +-------------+ | | +| +---------+ | | DDR | | | +| | *SYSFW* | | | config | | | +| +---------+ | +-------------+ | | +| | |<--------|---| Load | | | +| | | | | tispl.bin | | | +| | | | +-------------+ | | +| | |<--------|---| Start A53 | | | +| | | | | and Reset | | | +| | | | +-------------+ | | +| | | | | +-----------+ | +| | |---------|-----------------------|---->| Reset rls | | +| | | | | +-----------+ | +| | DMSC | | | : | +| |Services | | | +-----------+ | +| | |<--------|-----------------------|---->|*ATF/OPTEE*| | +| | | | | +-----------+ | +| | | | | : | +| | | | | +-----------+ | +| | |<--------|-----------------------|---->| *A53 SPL* | | +| | | | | +-----------+ | +| | | | | | Load | | +| | | | | | u-boot.img| | +| | | | | +-----------+ | +| | | | | : | +| | | | | +-----------+ | +| | |<--------|-----------------------|---->| *u-boot* | | +| | | | | +-----------+ | +| | | | | | prompt | | +| | | | | +-----------+ | +| +---------+ | | | +| | | | ++------------------------------------------------------------------------+ + +- Here DMSC acts as master and provides all the critical services. R5/A53 +requests DMSC to get these services done as shown in the above diagram. + +Sources: +-------- +1. SYSFW: + System Firmware repo is closed source and the binaries are delivered + to users with NDA. Please contact TI to get the System Firmware + Binary named ti-sci-firmware-am6x.bin that runs on AM65x SoC. + +2. ATF: + Tree: https://github.com/ARM-software/arm-trusted-firmware.git + Branch: master + +3. OPTEE: + Tree: https://github.com/OP-TEE/optee_os.git + Branch: master + +4. U-Boot: + Tree: http://git.denx.de/u-boot.git + Branch: master + +Build procedure: +---------------- +1. SYSFW: + ROM expects a signed binary that contains the X509 certificate. So +the binary ti-sci-firmware-am6x.bin cannot be uses as-is and needs to be signed. +Contact TI on the procedure to sign the system firmware binary. + +2. ATF: +$ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed + +3. OPTEE: +$ make PLATFORM=k3-am65x CFG_ARM64_core=y + +4. U-Boot: + +4.1. R5: + TBD. + +4.2. A53: +$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- am65x_evm_a53_defconfig O=/tmp/a53 +$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF=/build/k3/generic/release/bl31.bin TEE=/out/arm-plat-k3/core/tee-pager.bin O=/tmp/a53 + +Target Images +-------------- +Copy the below images to an SD card and boot: +- tiboot3.bin from step 4.1 +- tispl.bin, u-boot.img from 4.2 diff --git a/board/ti/am65x/evm.c b/board/ti/am65x/evm.c new file mode 100644 index 0000000000..cb54d97551 --- /dev/null +++ b/board/ti/am65x/evm.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Board specific initialization for AM654 EVM + * + * Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Lokesh Vutla + * + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + return 0; +} + +int dram_init(void) +{ +#ifdef CONFIG_PHYS_64BIT + gd->ram_size = 0x100000000; +#else + gd->ram_size = 0x80000000; +#endif + + return 0; +} + +ulong board_get_usable_ram_top(ulong total_size) +{ +#ifdef CONFIG_PHYS_64BIT + /* Limit RAM used by U-Boot to the DDR low region */ + if (gd->ram_top > 0x100000000) + return 0x100000000; +#endif + + return gd->ram_top; +} + +int dram_init_banksize(void) +{ + /* Bank 0 declares the memory available in the DDR low region */ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = 0x80000000; + +#ifdef CONFIG_PHYS_64BIT + /* Bank 1 declares the memory available in the DDR high region */ + gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE1; + gd->bd->bi_dram[1].size = 0x80000000; +#endif + + return 0; +} diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h new file mode 100644 index 0000000000..90dd9f3721 --- /dev/null +++ b/include/configs/am65x_evm.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Configuration header file for K3 AM654 EVM + * + * Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Lokesh Vutla + */ + +#ifndef __CONFIG_AM654_EVM_H +#define __CONFIG_AM654_EVM_H + +#include +#include + +#define CONFIG_ENV_SIZE (128 << 10) + +/* DDR Configuration */ +#define CONFIG_SYS_SDRAM_BASE1 0x880000000 + +/* SPL Loader Configuration */ +#ifdef CONFIG_TARGET_AM654_A53_EVM +#define CONFIG_SPL_TEXT_BASE 0x80080000 +#endif + +#define CONFIG_SKIP_LOWLEVEL_INIT + +#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \ + CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE - 4) + +/* Now for the remaining common defines */ +#include + +#endif /* __CONFIG_AM654_EVM_H */ -- 2.30.2