From 08c817c39908f9d120df1e4c90ddad4a11fc3891 Mon Sep 17 00:00:00 2001 From: David Wu Date: Wed, 2 Jan 2019 20:51:00 +0800 Subject: [PATCH] ARM: rockchip: Remove the pinctrl request at rk3288-board-spl If we use the new pinctrl driver, the pinctrl setup will be done by device probe. Remove the pinctrl setup at rk3288-board-spl. Signed-off-by: David Wu Reviewed-by: Philipp Tomsich Reviewed-by: Kever Yang Reviewed-by: Philipp Tomsich --- arch/arm/mach-rockchip/rk3288-board-spl.c | 79 ----------------------- 1 file changed, 79 deletions(-) diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c index 236cb932ba..93c772184d 100644 --- a/arch/arm/mach-rockchip/rk3288-board-spl.c +++ b/arch/arm/mach-rockchip/rk3288-board-spl.c @@ -78,45 +78,6 @@ fallback: return BOOT_DEVICE_MMC1; } -#ifdef CONFIG_SPL_MMC_SUPPORT -static int configure_emmc(struct udevice *pinctrl) -{ -#if defined(CONFIG_TARGET_CHROMEBOOK_JERRY) - - struct gpio_desc desc; - int ret; - - pinctrl_request_noflags(pinctrl, PERIPH_ID_EMMC); - - /* - * TODO(sjg@chromium.org): Pick this up from device tree or perhaps - * use the EMMC_PWREN setting. - */ - ret = dm_gpio_lookup_name("D9", &desc); - if (ret) { - debug("gpio ret=%d\n", ret); - return ret; - } - ret = dm_gpio_request(&desc, "emmc_pwren"); - if (ret) { - debug("gpio_request ret=%d\n", ret); - return ret; - } - ret = dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT); - if (ret) { - debug("gpio dir ret=%d\n", ret); - return ret; - } - ret = dm_gpio_set_value(&desc, 1); - if (ret) { - debug("gpio value ret=%d\n", ret); - return ret; - } -#endif - return 0; -} -#endif - #if !defined(CONFIG_SPL_OF_PLATDATA) static int phycore_init(void) { @@ -145,7 +106,6 @@ static int phycore_init(void) void board_init_f(ulong dummy) { - struct udevice *pinctrl; struct udevice *dev; int ret; @@ -184,12 +144,6 @@ void board_init_f(ulong dummy) return; } - ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); - if (ret) { - debug("Pinctrl init failed: %d\n", ret); - return; - } - #if !defined(CONFIG_SPL_OF_PLATDATA) if (of_machine_is_compatible("phytec,rk3288-phycore-som")) { ret = phycore_init(); @@ -240,52 +194,19 @@ static int setup_led(void) void spl_board_init(void) { - struct udevice *pinctrl; int ret; ret = setup_led(); - if (ret) { debug("LED ret=%d\n", ret); hang(); } - ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); - if (ret) { - debug("%s: Cannot find pinctrl device\n", __func__); - goto err; - } - -#ifdef CONFIG_SPL_MMC_SUPPORT - ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD); - if (ret) { - debug("%s: Failed to set up SD card\n", __func__); - goto err; - } - ret = configure_emmc(pinctrl); - if (ret) { - debug("%s: Failed to set up eMMC\n", __func__); - goto err; - } -#endif - - /* Enable debug UART */ - ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG); - if (ret) { - debug("%s: Failed to set up console UART\n", __func__); - goto err; - } - preloader_console_init(); #if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) back_to_bootrom(BROM_BOOT_NEXTSTAGE); #endif return; -err: - printf("spl_board_init: Error %d\n", ret); - - /* No way to report error here */ - hang(); } #ifdef CONFIG_SPL_OS_BOOT -- 2.30.2