From 08becaf62f4232f6bc60d899271529d66300d6ae Mon Sep 17 00:00:00 2001 From: Rodrigo Balerdi Date: Fri, 10 May 2024 03:35:43 -0300 Subject: [PATCH] ipq806x: rt4230w-rev6: fix status reporting via the LEDs There is a custom LED controller between the 3 SoC GPIO outputs and the red and blue LEDs of the device. It implements a strange mapping that includes fixed, flashing, and breathing modes. The current DTS configuration causes OpenWrt to flash the LEDs over the controller's own flashing, resulting in chaotic output in boot, failsafe, and upgrade modes. This change fixes the LEDs in the best way possible as long as each OpenWrt running state is limited to be signaled by a single led. Signed-off-by: Rodrigo Balerdi Link: https://github.com/openwrt/openwrt/pull/15440 Signed-off-by: Christian Marangi (cherry picked from commit 0868268c9fd4397411e9629eedda35b1547e798e) --- .../arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts b/target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts index 8d9601b632..77bb7a5cd5 100644 --- a/target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts +++ b/target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts @@ -13,10 +13,10 @@ }; aliases { - led-boot = &ledctrl3; + led-boot = &ledctrl1; led-failsafe = &ledctrl1; - led-running = &ledctrl2; - led-upgrade = &ledctrl3; + led-running = &ledctrl3; + led-upgrade = &ledctrl1; }; chosen { @@ -54,6 +54,7 @@ ledctrl2: ledctrl2 { label = "ledctrl2"; gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; }; ledctrl3: ledctrl3 { -- 2.30.2