From 084053ddf77837f404f37c0d146be62ecc12b825 Mon Sep 17 00:00:00 2001 From: David Bauer Date: Sun, 24 Apr 2022 23:48:42 +0200 Subject: [PATCH] mpc85xx: define reset-delay for WS-AP3825i eth PHY The WS-AP3825i uses Atheros PHYs which according to the datasheet require the reset to be asserted for at least 1 ms. This fixes broken eth1 upon soft-reboot. eth0 is no affected, as the ifup / ifdown cycle in preinit prevents this issue from happening when the system is ready. Reported-by: Tom Herbers Signed-off-by: David Bauer (cherry picked from commit 8b3c313515c1ae37be9d61a4e92c4bf4b43f605f) --- .../linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts index 43c044b4fc..26f742b222 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts @@ -149,12 +149,16 @@ interrupts = <3 1 0 0>; reg = <0x5>; reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; }; phy2: ethernet-phy@2 { interrupts = <1 1 0 0>; reg = <0x6>; reset-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; }; }; -- 2.30.2