From 07fdf7d9f19fb601a0cc75c47ecd55aa26019eed Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 9 Aug 2016 20:49:09 -0300 Subject: [PATCH] [media] cxd2820r: add I2C driver bindings Add I2C driver bindings in order to support proper I2C driver registration with driver core. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/cxd2820r.h | 26 +++ drivers/media/dvb-frontends/cxd2820r_c.c | 6 +- drivers/media/dvb-frontends/cxd2820r_core.c | 190 +++++++++++++++----- drivers/media/dvb-frontends/cxd2820r_priv.h | 7 +- drivers/media/dvb-frontends/cxd2820r_t.c | 6 +- drivers/media/dvb-frontends/cxd2820r_t2.c | 8 +- 6 files changed, 191 insertions(+), 52 deletions(-) diff --git a/drivers/media/dvb-frontends/cxd2820r.h b/drivers/media/dvb-frontends/cxd2820r.h index 56d42760263d..d77afe0b8a9e 100644 --- a/drivers/media/dvb-frontends/cxd2820r.h +++ b/drivers/media/dvb-frontends/cxd2820r.h @@ -37,6 +37,32 @@ #define CXD2820R_TS_PARALLEL 0x30 #define CXD2820R_TS_PARALLEL_MSB 0x70 +/* + * I2C address: 0x6c, 0x6d + */ + +/** + * struct cxd2820r_platform_data - Platform data for the cxd2820r driver + * @ts_mode: TS mode. + * @ts_clk_inv: TS clock inverted. + * @if_agc_polarity: IF AGC polarity. + * @spec_inv: Input spectrum inverted. + * @gpio_chip_base: GPIO. + * @get_dvb_frontend: Get DVB frontend. + */ + +struct cxd2820r_platform_data { + u8 ts_mode; + bool ts_clk_inv; + bool if_agc_polarity; + bool spec_inv; + int **gpio_chip_base; + + struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *); +/* private: For legacy media attach wrapper. Do not set value. */ + bool attach_in_use; +}; + struct cxd2820r_config { /* Demodulator I2C address. * Driver determines DVB-C slave I2C address automatically from master diff --git a/drivers/media/dvb-frontends/cxd2820r_c.c b/drivers/media/dvb-frontends/cxd2820r_c.c index 82df94413aeb..0d036e1a43e2 100644 --- a/drivers/media/dvb-frontends/cxd2820r_c.c +++ b/drivers/media/dvb-frontends/cxd2820r_c.c @@ -42,9 +42,9 @@ int cxd2820r_set_frontend_c(struct dvb_frontend *fe) { 0x10059, 0x50, 0xff }, { 0x10087, 0x0c, 0x3c }, { 0x1008b, 0x07, 0xff }, - { 0x1001f, priv->cfg.if_agc_polarity << 7, 0x80 }, - { 0x10070, priv->cfg.ts_mode, 0xff }, - { 0x10071, !priv->cfg.ts_clock_inv << 4, 0x10 }, + { 0x1001f, priv->if_agc_polarity << 7, 0x80 }, + { 0x10070, priv->ts_mode, 0xff }, + { 0x10071, !priv->ts_clk_inv << 4, 0x10 }, }; dev_dbg(&priv->i2c->dev, "%s: frequency=%d symbol_rate=%d\n", __func__, diff --git a/drivers/media/dvb-frontends/cxd2820r_core.c b/drivers/media/dvb-frontends/cxd2820r_core.c index 66da8212cb60..cf5eed477c44 100644 --- a/drivers/media/dvb-frontends/cxd2820r_core.c +++ b/drivers/media/dvb-frontends/cxd2820r_core.c @@ -49,7 +49,7 @@ static int cxd2820r_wr_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg, buf[0] = reg; memcpy(&buf[1], val, len); - ret = i2c_transfer(priv->i2c, msg, 1); + ret = i2c_transfer(priv->client[0]->adapter, msg, 1); if (ret == 1) { ret = 0; } else { @@ -87,7 +87,7 @@ static int cxd2820r_rd_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg, return -EINVAL; } - ret = i2c_transfer(priv->i2c, msg, 2); + ret = i2c_transfer(priv->client[0]->adapter, msg, 2); if (ret == 2) { memcpy(val, buf, len); ret = 0; @@ -112,9 +112,9 @@ int cxd2820r_wr_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val, /* select I2C */ if (i2c) - i2c_addr = priv->cfg.i2c_address | (1 << 1); /* DVB-C */ + i2c_addr = priv->client[1]->addr; /* DVB-C */ else - i2c_addr = priv->cfg.i2c_address; /* DVB-T/T2 */ + i2c_addr = priv->client[0]->addr; /* DVB-T/T2 */ /* switch bank if needed */ if (bank != priv->bank[i2c]) { @@ -138,9 +138,9 @@ int cxd2820r_rd_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val, /* select I2C */ if (i2c) - i2c_addr = priv->cfg.i2c_address | (1 << 1); /* DVB-C */ + i2c_addr = priv->client[1]->addr; /* DVB-C */ else - i2c_addr = priv->cfg.i2c_address; /* DVB-T/T2 */ + i2c_addr = priv->client[0]->addr; /* DVB-T/T2 */ /* switch bank if needed */ if (bank != priv->bank[i2c]) { @@ -537,16 +537,12 @@ static int cxd2820r_get_frontend_algo(struct dvb_frontend *fe) static void cxd2820r_release(struct dvb_frontend *fe) { struct cxd2820r_priv *priv = fe->demodulator_priv; + struct i2c_client *client = priv->client[0]; dev_dbg(&priv->i2c->dev, "%s\n", __func__); -#ifdef CONFIG_GPIOLIB - /* remove GPIOs */ - if (priv->gpio_chip.label) - gpiochip_remove(&priv->gpio_chip); + i2c_unregister_device(client); -#endif - kfree(priv); return; } @@ -646,49 +642,113 @@ static const struct dvb_frontend_ops cxd2820r_ops = { .read_signal_strength = cxd2820r_read_signal_strength, }; -struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *cfg, - struct i2c_adapter *i2c, int *gpio_chip_base -) +/* + * XXX: That is wrapper to cxd2820r_probe() via driver core in order to provide + * proper I2C client for legacy media attach binding. + * New users must use I2C client binding directly! + */ +struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *config, + struct i2c_adapter *adapter, + int *gpio_chip_base) { + struct i2c_client *client; + struct i2c_board_info board_info; + struct cxd2820r_platform_data pdata; + + pdata.ts_mode = config->ts_mode; + pdata.ts_clk_inv = config->ts_clock_inv; + pdata.if_agc_polarity = config->if_agc_polarity; + pdata.spec_inv = config->spec_inv; + pdata.gpio_chip_base = &gpio_chip_base; + pdata.attach_in_use = true; + + memset(&board_info, 0, sizeof(board_info)); + strlcpy(board_info.type, "cxd2820r", I2C_NAME_SIZE); + board_info.addr = config->i2c_address; + board_info.platform_data = &pdata; + client = i2c_new_device(adapter, &board_info); + if (!client || !client->dev.driver) + return NULL; + + return pdata.get_dvb_frontend(client); +} +EXPORT_SYMBOL(cxd2820r_attach); + +static struct dvb_frontend *cxd2820r_get_dvb_frontend(struct i2c_client *client) +{ + struct cxd2820r_priv *priv = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "\n"); + + return &priv->fe; +} + +static int cxd2820r_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct cxd2820r_platform_data *pdata = client->dev.platform_data; struct cxd2820r_priv *priv; - int ret; - u8 tmp; + int ret, *gpio_chip_base; + u8 u8tmp; - priv = kzalloc(sizeof(struct cxd2820r_priv), GFP_KERNEL); + dev_dbg(&client->dev, "\n"); + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { ret = -ENOMEM; - dev_err(&i2c->dev, "%s: kzalloc() failed\n", - KBUILD_MODNAME); - goto error; + goto err; } - priv->i2c = i2c; - memcpy(&priv->cfg, cfg, sizeof(struct cxd2820r_config)); - memcpy(&priv->fe.ops, &cxd2820r_ops, sizeof(struct dvb_frontend_ops)); - priv->fe.demodulator_priv = priv; + priv->client[0] = client; + priv->i2c = client->adapter; + priv->ts_mode = pdata->ts_mode; + priv->ts_clk_inv = pdata->ts_clk_inv; + priv->if_agc_polarity = pdata->if_agc_polarity; + priv->spec_inv = pdata->spec_inv; + priv->bank[0] = 0xff; + priv->bank[1] = 0xff; + gpio_chip_base = *pdata->gpio_chip_base; + + /* Check demod answers with correct chip id */ + ret = cxd2820r_rd_reg(priv, 0x000fd, &u8tmp); + if (ret) + goto err_kfree; - priv->bank[0] = priv->bank[1] = 0xff; - ret = cxd2820r_rd_reg(priv, 0x000fd, &tmp); - dev_dbg(&priv->i2c->dev, "%s: chip id=%02x\n", __func__, tmp); - if (ret || tmp != 0xe1) - goto error; + dev_dbg(&client->dev, "chip_id=%02x\n", u8tmp); + + if (u8tmp != 0xe1) { + ret = -ENODEV; + goto err_kfree; + } + + /* + * Chip has two I2C addresses for different register banks. We register + * one dummy I2C client in in order to get own I2C client for each + * register bank. + */ + priv->client[1] = i2c_new_dummy(client->adapter, client->addr | (1 << 1)); + if (!priv->client[1]) { + ret = -ENODEV; + dev_err(&client->dev, "I2C registration failed\n"); + if (ret) + goto err_kfree; + } if (gpio_chip_base) { #ifdef CONFIG_GPIOLIB - /* add GPIOs */ + /* Add GPIOs */ priv->gpio_chip.label = KBUILD_MODNAME; priv->gpio_chip.parent = &priv->i2c->dev; priv->gpio_chip.owner = THIS_MODULE; - priv->gpio_chip.direction_output = - cxd2820r_gpio_direction_output; + priv->gpio_chip.direction_output = cxd2820r_gpio_direction_output; priv->gpio_chip.set = cxd2820r_gpio_set; priv->gpio_chip.get = cxd2820r_gpio_get; - priv->gpio_chip.base = -1; /* dynamic allocation */ + priv->gpio_chip.base = -1; /* Dynamic allocation */ priv->gpio_chip.ngpio = GPIO_COUNT; priv->gpio_chip.can_sleep = 1; ret = gpiochip_add_data(&priv->gpio_chip, priv); if (ret) - goto error; + goto err_client_1_i2c_unregister_device; dev_dbg(&priv->i2c->dev, "%s: gpio_chip.base=%d\n", __func__, priv->gpio_chip.base); @@ -705,17 +765,65 @@ struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *cfg, gpio[2] = 0; ret = cxd2820r_gpio(&priv->fe, gpio); if (ret) - goto error; + goto err_client_1_i2c_unregister_device; #endif } - return &priv->fe; -error: - dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret); + /* Create dvb frontend */ + memcpy(&priv->fe.ops, &cxd2820r_ops, sizeof(priv->fe.ops)); + if (!pdata->attach_in_use) + priv->fe.ops.release = NULL; + priv->fe.demodulator_priv = priv; + i2c_set_clientdata(client, priv); + + /* Setup callbacks */ + pdata->get_dvb_frontend = cxd2820r_get_dvb_frontend; + + dev_info(&client->dev, "Sony CXD2820R successfully identified\n"); + + return 0; +err_client_1_i2c_unregister_device: + i2c_unregister_device(priv->client[1]); +err_kfree: kfree(priv); - return NULL; +err: + dev_dbg(&client->dev, "failed=%d\n", ret); + return ret; } -EXPORT_SYMBOL(cxd2820r_attach); + +static int cxd2820r_remove(struct i2c_client *client) +{ + struct cxd2820r_priv *priv = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "\n"); + +#ifdef CONFIG_GPIOLIB + if (priv->gpio_chip.label) + gpiochip_remove(&priv->gpio_chip); +#endif + i2c_unregister_device(priv->client[1]); + kfree(priv); + + return 0; +} + +static const struct i2c_device_id cxd2820r_id_table[] = { + {"cxd2820r", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, cxd2820r_id_table); + +static struct i2c_driver cxd2820r_driver = { + .driver = { + .name = "cxd2820r", + .suppress_bind_attrs = true, + }, + .probe = cxd2820r_probe, + .remove = cxd2820r_remove, + .id_table = cxd2820r_id_table, +}; + +module_i2c_driver(cxd2820r_driver); MODULE_AUTHOR("Antti Palosaari "); MODULE_DESCRIPTION("Sony CXD2820R demodulator driver"); diff --git a/drivers/media/dvb-frontends/cxd2820r_priv.h b/drivers/media/dvb-frontends/cxd2820r_priv.h index 66b19dd1f186..f711fbd6e7e7 100644 --- a/drivers/media/dvb-frontends/cxd2820r_priv.h +++ b/drivers/media/dvb-frontends/cxd2820r_priv.h @@ -38,9 +38,14 @@ struct reg_val_mask { #define CXD2820R_CLK 41000000 struct cxd2820r_priv { + struct i2c_client *client[2]; struct i2c_adapter *i2c; struct dvb_frontend fe; - struct cxd2820r_config cfg; + u8 ts_mode; + bool ts_clk_inv; + bool if_agc_polarity; + bool spec_inv; + u64 post_bit_error_prev_dvbv3; u64 post_bit_error; diff --git a/drivers/media/dvb-frontends/cxd2820r_t.c b/drivers/media/dvb-frontends/cxd2820r_t.c index ddd8e46511a9..e328fe2f7bf9 100644 --- a/drivers/media/dvb-frontends/cxd2820r_t.c +++ b/drivers/media/dvb-frontends/cxd2820r_t.c @@ -45,9 +45,9 @@ int cxd2820r_set_frontend_t(struct dvb_frontend *fe) { 0x00085, 0x07, 0xff }, { 0x00088, 0x01, 0xff }, - { 0x00070, priv->cfg.ts_mode, 0xff }, - { 0x00071, !priv->cfg.ts_clock_inv << 4, 0x10 }, - { 0x000cb, priv->cfg.if_agc_polarity << 6, 0x40 }, + { 0x00070, priv->ts_mode, 0xff }, + { 0x00071, !priv->ts_clk_inv << 4, 0x10 }, + { 0x000cb, priv->if_agc_polarity << 6, 0x40 }, { 0x000a5, 0x00, 0x01 }, { 0x00082, 0x20, 0x60 }, { 0x000c2, 0xc3, 0xff }, diff --git a/drivers/media/dvb-frontends/cxd2820r_t2.c b/drivers/media/dvb-frontends/cxd2820r_t2.c index e09f1527ef0c..3a2c198153a3 100644 --- a/drivers/media/dvb-frontends/cxd2820r_t2.c +++ b/drivers/media/dvb-frontends/cxd2820r_t2.c @@ -45,10 +45,10 @@ int cxd2820r_set_frontend_t2(struct dvb_frontend *fe) { 0x0207f, 0x2a, 0xff }, { 0x02082, 0x0a, 0xff }, { 0x02083, 0x0a, 0xff }, - { 0x020cb, priv->cfg.if_agc_polarity << 6, 0x40 }, - { 0x02070, priv->cfg.ts_mode, 0xff }, - { 0x02071, !priv->cfg.ts_clock_inv << 6, 0x40 }, - { 0x020b5, priv->cfg.spec_inv << 4, 0x10 }, + { 0x020cb, priv->if_agc_polarity << 6, 0x40 }, + { 0x02070, priv->ts_mode, 0xff }, + { 0x02071, !priv->ts_clk_inv << 6, 0x40 }, + { 0x020b5, priv->spec_inv << 4, 0x10 }, { 0x02567, 0x07, 0x0f }, { 0x02569, 0x03, 0x03 }, { 0x02595, 0x1a, 0xff }, -- 2.30.2