From 07723492e9acf5aea51eb8de3bcc4e36305c9e6b Mon Sep 17 00:00:00 2001 From: Michael Pratt Date: Wed, 17 Mar 2021 19:07:46 -0400 Subject: [PATCH] ath79: improve factory.bin for some Senao devices Some boards with firmware made with Senao SDK based on Linux 3.3 have the following lines in the OEM upgrade script at /etc/fwupgrade.sh local append="" local CONF_TAR="/tmp/sysupgrade.tgz" [ -f "$CONF_TAR" ] && append="-j $CONF_TAR" and \# check FWINFO filename [ -z $(ls FWINFO* | grep -i ${modelname}) ] && errcode="1" This addition also prevents needing to factory reset after flashing for some boards that also have these lines in the script \# Support downgrade but do default (Smart v2.x.x.x -> senaowrt v1.x.x.x) [ $(ls FWINFO* | grep -i ${modelname} | cut -d "-" -f4 | cut -c 2) -lt 2 ] && append="" Signed-off-by: Michael Pratt --- target/linux/ath79/image/common-senao.mk | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/target/linux/ath79/image/common-senao.mk b/target/linux/ath79/image/common-senao.mk index c9c14944c4..dda7da6776 100644 --- a/target/linux/ath79/image/common-senao.mk +++ b/target/linux/ath79/image/common-senao.mk @@ -1,6 +1,6 @@ DEVICE_VARS += SENAO_IMGNAME -# This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to +# This needs to make OEM config archive 'sysupgrade.tgz' an empty file prior to OEM # sysupgrade, as otherwise it will implant the old configuration from # OEM firmware when writing rootfs from factory.bin # rootfs size and checksum is taken from a squashfs header @@ -9,7 +9,9 @@ define Build/senao-tar-gz -[ -f "$@" ] && \ mkdir -p $@.tmp && \ touch $@.tmp/failsafe.bin && \ + touch $@.tmp/FWINFO-$(word 1,$(1))-$(REVISION) && \ echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \ + echo ': > /tmp/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \ echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \ echo -n $$(( $$(cat $@ | wc -c) / 4096 * 4096 )) > $@.len && \ dd if=$@ bs=$$(cat $@.len) count=1 | md5sum - | cut -d ' ' -f 1 > $@.md5 && \ -- 2.30.2