From 06302ffbb470359c8cbcf1ee8b057d6930300f90 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 12 Feb 2012 15:03:03 -0300 Subject: [PATCH] [media] cx22702: Fix signal strength The signal strength value returned is not quite correct, it decreases when I increase the gain of my antenna, and vice versa. It also doesn't span over the whole 0x0000-0xffff range. Compute a value which at least increases when signal strength increases, and spans the whole allowed range. In practice I get 67% with my antenna fully amplified and 51% with no amplification. This is close enough to what I get on my other DVB-T adapter with the same antenna. Signed-off-by: Jean Delvare Cc: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/cx22702.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c index faba82485086..edc8eafc5c09 100644 --- a/drivers/media/dvb/frontends/cx22702.c +++ b/drivers/media/dvb/frontends/cx22702.c @@ -502,10 +502,26 @@ static int cx22702_read_signal_strength(struct dvb_frontend *fe, u16 *signal_strength) { struct cx22702_state *state = fe->demodulator_priv; + u8 reg23; - u16 rs_ber; - rs_ber = cx22702_readreg(state, 0x23); - *signal_strength = (rs_ber << 8) | rs_ber; + /* + * Experience suggests that the strength signal register works as + * follows: + * - In the absence of signal, value is 0xff. + * - In the presence of a weak signal, bit 7 is set, not sure what + * the lower 7 bits mean. + * - In the presence of a strong signal, the register holds a 7-bit + * value (bit 7 is cleared), with greater values standing for + * weaker signals. + */ + reg23 = cx22702_readreg(state, 0x23); + if (reg23 & 0x80) { + *signal_strength = 0; + } else { + reg23 = ~reg23 & 0x7f; + /* Scale to 16 bit */ + *signal_strength = (reg23 << 9) | (reg23 << 2) | (reg23 >> 5); + } return 0; } -- 2.30.2