From 0541527bde7d2df155fc9691115d234fa7a3f603 Mon Sep 17 00:00:00 2001 From: Hou Zhiqiang Date: Mon, 16 Jan 2017 17:31:49 +0800 Subject: [PATCH] kconfig: fsl PPA: move CONFIG_* to Kconfig Signed-off-by: Hou Zhiqiang Reviewed-by: York Sun --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 26 +++++++++++++++++++++- arch/arm/cpu/armv8/fsl-layerscape/Makefile | 2 +- include/configs/ls1043ardb.h | 7 ------ include/configs/ls1046ardb.h | 7 ------ 4 files changed, 26 insertions(+), 16 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 0b8d30004c..ba411e2af8 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -102,13 +102,37 @@ menu "Layerscape PPA" config FSL_LS_PPA bool "FSL Layerscape PPA firmware support" depends on !ARMV8_PSCI - depends on ARCH_LS1043A || ARCH_LS1046A + select ARMV8_SEC_FIRMWARE_SUPPORT select SEC_FIRMWARE_ARMV8_PSCI + select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2 help The FSL Primary Protected Application (PPA) is a software component which is loaded during boot stage, and then remains resident in RAM and runs in the TrustZone after boot. Say y to enable it. +choice + prompt "FSL Layerscape PPA firmware loading-media select" + depends on FSL_LS_PPA + default SYS_LS_PPA_FW_IN_XIP + +config SYS_LS_PPA_FW_IN_XIP + bool "XIP" + help + Say Y here if the PPA firmware locate at XIP flash, such + as NOR or QSPI flash. + +endchoice + +config SYS_LS_PPA_FW_ADDR + hex "Address of PPA firmware loading from" + depends on FSL_LS_PPA + default 0x40500000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x60500000 if SYS_LS_PPA_FW_IN_XIP + help + If the PPA firmware locate at XIP flash, such as NOR or + QSPI flash, this address is a directly memory-mapped. + If it is in a serial accessed flash, such as NAND and SD + card, it is a byte offset. endmenu config SYS_FSL_ERRATUM_A010315 diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index 423b4b39a8..c9ab93e3d7 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -10,7 +10,7 @@ obj-y += soc.o obj-$(CONFIG_MP) += mp.o obj-$(CONFIG_OF_LIBFDT) += fdt.o obj-$(CONFIG_SPL) += spl.o -obj-$(CONFIG_FSL_LS_PPA) += ppa.o +obj-$(CONFIG_$(SPL_)FSL_LS_PPA) += ppa.o ifneq ($(CONFIG_FSL_LSCH3),) obj-y += fsl_lsch3_speed.o diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 3657f21dfb..0054d1643e 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -9,13 +9,6 @@ #include "ls1043a_common.h" -#if defined(CONFIG_FSL_LS_PPA) -#define CONFIG_SYS_LS_PPA_FW_IN_XIP -#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP -#define CONFIG_SYS_LS_PPA_FW_ADDR 0x60500000 -#endif -#endif - #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT) #define CONFIG_SYS_TEXT_BASE 0x82000000 #else diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 08c5441807..24843dc9ba 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -9,13 +9,6 @@ #include "ls1046a_common.h" -#if defined(CONFIG_FSL_LS_PPA) -#define CONFIG_SYS_LS_PPA_FW_IN_XIP -#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP -#define CONFIG_SYS_LS_PPA_FW_ADDR 0x40500000 -#endif -#endif - #ifdef CONFIG_SD_BOOT #define CONFIG_SYS_TEXT_BASE 0x82000000 #else -- 2.30.2