From 05286d2c05cc3f928165b3aff0c7197ebed2957f Mon Sep 17 00:00:00 2001 From: Florian Eckert Date: Thu, 2 Dec 2021 08:36:44 +0100 Subject: [PATCH] github: add issue templates file Signed-off-by: Florian Eckert --- .github/issue_template | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 .github/issue_template diff --git a/.github/issue_template b/.github/issue_template new file mode 100644 index 0000000000..2d2aef2088 --- /dev/null +++ b/.github/issue_template @@ -0,0 +1,40 @@ +# Issue template: +1. Please make sure that the issue subject starts with `:` +2. Issues related to end of life (EOL) releases are not supported or maintained and will be closed +3. Remove lines from top till here and fill in the following questions +*** + +## Steps to reproduce: +**Example: Replace the following lines and remove this** + +1. go to: Network → Interfaces → LAN (an interface with a static address) → DHCP server tab → IPv6 RA settings tab +2. set RA MTU and RA Hop Limit to arbitrary non-default value +3. Save & Apply +4. go to: IPv6 RA settings tab again + +## Actual behavior: +**Example: Replace the following lines and remove this** + +1. option ra_mtu '1500' is set correctly in /etc/config/dhcp +2. In LuCI though, RA MTU and RA Hop Limit are still displaying the default values in light gray font color. + +## Expected behavior: +**Example: Replace the following lines and remove this** + +``` +RA MTU and RA Hop Limit are displaying the correct values found in /etc/config/dhcp in black font color. +``` + +## Additional Information: +OpenWrt version information from system `/etc/openwrt_release` + +**Example: Replace the following lines and remove this** +``` +DISTRIB_ID='OpenWrt' +DISTRIB_RELEASE='21.02.0-rc4' +DISTRIB_REVISION='r16256-2d5ee43dc6' +DISTRIB_TARGET='x86/64' +DISTRIB_ARCH='x86_64' +DISTRIB_DESCRIPTION='OpenWrt 21.02.0-rc4 r16256-2d5ee43dc6' +DISTRIB_TAINTS='' +``` -- 2.30.2