From 04a92077d205abdf3827545f8dea4c6521384c4c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 7 Jun 2011 19:37:47 -0300 Subject: [PATCH] [media] DocBook/dvbproperty.xml: Document the remaining S2API parameters There were lots of DVB S2API parameters that were never documented. Let's add a definition for all of them, based on what's currently used inside the core and the drivers. The description here is not complete nor perfect, so patches improving it are welcome. Signed-off-by: Mauro Carvalho Chehab --- .../DocBook/media/dvb/dvbproperty.xml | 204 +++++++++++++++++- 1 file changed, 203 insertions(+), 1 deletion(-) diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index 3a1ecb2ba632..67a2deba747a 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -199,6 +199,208 @@ get/set up to 64 properties. The actual meaning of each property is described on
Parameters that are common to all Digital TV standards +
+ <constant>DTV_UNDEFINED</constant> + Used internally. A GET/SET operation for it won't change or return anything. +
+
+ <constant>DTV_TUNE</constant> + Interpret the cache of data, build either a traditional frontend tunerequest so we can pass validation in the FE_SET_FRONTEND ioctl. +
+
+ <constant>DTV_CLEAR</constant> + Reset a cache of data specific to the frontend here. This does not effect hardware. +
+
+ <constant>DTV_MODULATION</constant> +Specifies the frontend modulation type for cable and satellite types. The modulation can be one of the types bellow: + + typedef enum fe_modulation { + QPSK, + QAM_16, + QAM_32, + QAM_64, + QAM_128, + QAM_256, + QAM_AUTO, + VSB_8, + VSB_16, + PSK_8, + APSK_16, + APSK_32, + DQPSK, + } fe_modulation_t; + +
+
+ <constant>DTV_INVERSION</constant> + The Inversion field can take one of these values: + + + typedef enum fe_spectral_inversion { + INVERSION_OFF, + INVERSION_ON, + INVERSION_AUTO + } fe_spectral_inversion_t; + + It indicates if spectral inversion should be presumed or not. In the automatic setting + (INVERSION_AUTO) the hardware will try to figure out the correct setting by + itself. + +
+
+ <constant>DTV_DISEQC_MASTER</constant> + Currently not implemented. +
+
+ <constant>DTV_SYMBOL_RATE</constant> + Digital TV symbol rate, in bauds (symbols/second). Used on cable standards. +
+
+ <constant>DTV_INNER_FEC</constant> + Used cable/satellite transmissions. The acceptable values are: + + +typedef enum fe_code_rate { + FEC_NONE = 0, + FEC_1_2, + FEC_2_3, + FEC_3_4, + FEC_4_5, + FEC_5_6, + FEC_6_7, + FEC_7_8, + FEC_8_9, + FEC_AUTO, + FEC_3_5, + FEC_9_10, +} fe_code_rate_t; + + which correspond to error correction rates of 1/2, 2/3, etc., + no error correction or auto detection. +
+
+ <constant>DTV_VOLTAGE</constant> + The voltage is usually used with non-DiSEqC capable LNBs to switch + the polarzation (horizontal/vertical). When using DiSEqC epuipment this + voltage has to be switched consistently to the DiSEqC commands as + described in the DiSEqC spec. + + typedef enum fe_sec_voltage { + SEC_VOLTAGE_13, + SEC_VOLTAGE_18 + } fe_sec_voltage_t; + +
+
+ <constant>DTV_TONE</constant> + Currently not used. +
+
+ <constant>DTV_PILOT</constant> + Sets DVB-S2 pilot +
+ fe_pilot type + +typedef enum fe_pilot { + PILOT_ON, + PILOT_OFF, + PILOT_AUTO, +} fe_pilot_t; + +
+
+
+ <constant>DTV_ROLLOFF</constant> + Sets DVB-S2 rolloff + +
+ fe_rolloff type + +typedef enum fe_rolloff { + ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */ + ROLLOFF_20, + ROLLOFF_25, + ROLLOFF_AUTO, +} fe_rolloff_t; + +
+
+
+ <constant>DTV_DISEQC_SLAVE_REPLY</constant> + Currently not implemented. +
+
+ <constant>DTV_FE_CAPABILITY_COUNT</constant> + Currently not implemented. +
+
+ <constant>DTV_FE_CAPABILITY</constant> + Currently not implemented. +
+
+ <constant>DTV_API_VERSION</constant> + Returns the major/minor version of the DVB API +
+
+ <constant>DTV_CODE_RATE_HP</constant> + Used on terrestrial transmissions. The acceptable values are: + + +typedef enum fe_code_rate { + FEC_NONE = 0, + FEC_1_2, + FEC_2_3, + FEC_3_4, + FEC_4_5, + FEC_5_6, + FEC_6_7, + FEC_7_8, + FEC_8_9, + FEC_AUTO, + FEC_3_5, + FEC_9_10, +} fe_code_rate_t; + +
+
+ <constant>DTV_CODE_RATE_LP</constant> + Used on terrestrial transmissions. The acceptable values are: + + +typedef enum fe_code_rate { + FEC_NONE = 0, + FEC_1_2, + FEC_2_3, + FEC_3_4, + FEC_4_5, + FEC_5_6, + FEC_6_7, + FEC_7_8, + FEC_8_9, + FEC_AUTO, + FEC_3_5, + FEC_9_10, +} fe_code_rate_t; + +
+
+ <constant>DTV_HIERARCHY</constant> + Frontend hierarchy + +typedef enum fe_hierarchy { + HIERARCHY_NONE, + HIERARCHY_1, + HIERARCHY_2, + HIERARCHY_4, + HIERARCHY_AUTO + } fe_hierarchy_t; + +
+
+ <constant>DTV_ISDBS_TS_ID</constant> + Currently unused. +
<constant>DTV_FREQUENCY</constant> @@ -573,7 +775,7 @@ typedef enum fe_guard_interval {
DVB-T2 parameters - + This section covers parameters that apply only to the DVB-T2 delivery method. DVB-T2 support is currently in the early stages development so expect this section to grow and become more detailed with time. -- 2.30.2