From 04a123a99f089773fc6ee6e21af5f831d87fe362 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 9 Feb 2016 15:01:21 +0100 Subject: [PATCH] mtd: nand: fsmc: get rid of the fsmc_nand_eccplace struct Now that mtd_ooblayout_ecc() returns the ECC byte position using the OOB free method, we can get rid of the fsmc_nand_eccplace struct. Signed-off-by: Boris Brezillon --- drivers/mtd/nand/fsmc_nand.c | 60 +++++++++--------------------------- include/linux/mtd/fsmc.h | 18 ----------- 2 files changed, 15 insertions(+), 63 deletions(-) diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 275a98ca4f6a..13720405ec81 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -39,35 +39,6 @@ #include #include -/* - * ECC placement definitions in oobfree type format. - * There are 13 bytes of ecc for every 512 byte block and it has to be read - * consecutively and immediately after the 512 byte data block for hardware to - * generate the error bit offsets in 512 byte data. - * Managing the ecc bytes in the following way makes it easier for software to - * read ecc bytes consecutive to data bytes. This way is similar to - * oobfree structure maintained already in generic nand driver - */ -static struct fsmc_eccplace fsmc_ecc4_lp_place = { - .eccplace = { - {.offset = 2, .length = 13}, - {.offset = 18, .length = 13}, - {.offset = 34, .length = 13}, - {.offset = 50, .length = 13}, - {.offset = 66, .length = 13}, - {.offset = 82, .length = 13}, - {.offset = 98, .length = 13}, - {.offset = 114, .length = 13} - } -}; - -static struct fsmc_eccplace fsmc_ecc4_sp_place = { - .eccplace = { - {.offset = 0, .length = 4}, - {.offset = 6, .length = 9} - } -}; - static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section, struct mtd_oob_region *oobregion) { @@ -105,6 +76,12 @@ static const struct mtd_ooblayout_ops fsmc_ecc1_ooblayout_ops = { .free = fsmc_ecc1_ooblayout_free, }; +/* + * ECC placement definitions in oobfree type format. + * There are 13 bytes of ecc for every 512 byte block and it has to be read + * consecutively and immediately after the 512 byte data block for hardware to + * generate the error bit offsets in 512 byte data. + */ static int fsmc_ecc4_ooblayout_ecc(struct mtd_info *mtd, int section, struct mtd_oob_region *oobregion) { @@ -155,7 +132,6 @@ static const struct mtd_ooblayout_ops fsmc_ecc4_ooblayout_ops = { * @partitions: Partition info for a NAND Flash. * @nr_partitions: Total number of partition of a NAND flash. * - * @ecc_place: ECC placing locations in oobfree type format. * @bank: Bank number for probed device. * @clk: Clock structure for FSMC. * @@ -175,7 +151,6 @@ struct fsmc_nand_data { struct mtd_partition *partitions; unsigned int nr_partitions; - struct fsmc_eccplace *ecc_place; unsigned int bank; struct device *dev; enum access_mode mode; @@ -582,8 +557,6 @@ static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf, static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { - struct fsmc_nand_data *host = mtd_to_fsmc(mtd); - struct fsmc_eccplace *ecc_place = host->ecc_place; int i, j, s, stat, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; @@ -606,9 +579,15 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, chip->read_buf(mtd, p, eccsize); for (j = 0; j < eccbytes;) { - off = ecc_place->eccplace[group].offset; - len = ecc_place->eccplace[group].length; - group++; + struct mtd_oob_region oobregion; + int ret; + + ret = mtd_ooblayout_ecc(mtd, group++, &oobregion); + if (ret) + return ret; + + off = oobregion.offset; + len = oobregion.length; /* * length is intentionally kept a higher multiple of 2 @@ -956,19 +935,10 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) if (AMBA_REV_BITS(host->pid) >= 8) { switch (mtd->oobsize) { case 16: - host->ecc_place = &fsmc_ecc4_sp_place; - break; case 64: - host->ecc_place = &fsmc_ecc4_lp_place; - break; case 128: - host->ecc_place = &fsmc_ecc4_lp_place; - break; case 224: - host->ecc_place = &fsmc_ecc4_lp_place; - break; case 256: - host->ecc_place = &fsmc_ecc4_lp_place; break; default: dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n", diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h index c8be32e9fc49..ad3c3488073c 100644 --- a/include/linux/mtd/fsmc.h +++ b/include/linux/mtd/fsmc.h @@ -103,24 +103,6 @@ #define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ) -/* - * There are 13 bytes of ecc for every 512 byte block in FSMC version 8 - * and it has to be read consecutively and immediately after the 512 - * byte data block for hardware to generate the error bit offsets - * Managing the ecc bytes in the following way is easier. This way is - * similar to oobfree structure maintained already in u-boot nand driver - */ -#define MAX_ECCPLACE_ENTRIES 32 - -struct fsmc_nand_eccplace { - uint8_t offset; - uint8_t length; -}; - -struct fsmc_eccplace { - struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES]; -}; - struct fsmc_nand_timings { uint8_t tclr; uint8_t tar; -- 2.30.2