From 042cb56478152b31c50bea8a784fc826891eb38e Mon Sep 17 00:00:00 2001 From: Tao Ren Date: Mon, 5 Nov 2018 14:35:40 -0800 Subject: [PATCH] net: phy: Allow BCM54616S PHY to setup internal TX/RX clock delay This patch allows users to enable/disable internal TX and/or RX clock delay for BCM54616S PHYs so as to satisfy RGMII timing specifications. On a particular platform, whether TX and/or RX clock delay is required depends on how PHY connected to the MAC IP. This requirement can be specified through "phy-mode" property in the platform device tree. The patch is inspired by commit 733336262b28 ("net: phy: Allow BCM5481x PHYs to setup internal TX/RX clock delay"). Signed-off-by: Tao Ren Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/broadcom.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index e86ea105c802..704537010453 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -92,7 +92,7 @@ static int bcm54612e_config_init(struct phy_device *phydev) return 0; } -static int bcm5481x_config(struct phy_device *phydev) +static int bcm54xx_config_clock_delay(struct phy_device *phydev) { int rc, val; @@ -429,7 +429,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev) ret = genphy_config_aneg(phydev); /* Then we can set up the delay. */ - bcm5481x_config(phydev); + bcm54xx_config_clock_delay(phydev); if (of_property_read_bool(np, "enet-phy-lane-swap")) { /* Lane Swap - Undocumented register...magic! */ @@ -442,6 +442,19 @@ static int bcm5481_config_aneg(struct phy_device *phydev) return ret; } +static int bcm54616s_config_aneg(struct phy_device *phydev) +{ + int ret; + + /* Aneg firsly. */ + ret = genphy_config_aneg(phydev); + + /* Then we can set up the delay. */ + bcm54xx_config_clock_delay(phydev); + + return ret; +} + static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set) { int val; @@ -636,6 +649,7 @@ static struct phy_driver broadcom_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, + .config_aneg = bcm54616s_config_aneg, .ack_interrupt = bcm_phy_ack_intr, .config_intr = bcm_phy_config_intr, }, { -- 2.30.2