From 03e859d344267c2e6833418e05052f2eb0f65b81 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Tue, 19 Mar 2013 10:54:21 -0400 Subject: [PATCH] staging: ti-soc-thermal: rename symbols to use better prefix As this driver has been renamed to cope with the chips it is supposed to support, this patch also changes the symbol names to use a proper prefix, so it is not suggestive that this driver supports only OMAP devices. Cc: Santosh Shilimkar Cc: Benoit Cc: Nishanth Menon Cc: Dan Carpenter Signed-off-by: Eduardo Valentin Signed-off-by: Greg Kroah-Hartman --- .../ti-soc-thermal/omap4-thermal-data.c | 64 +-- .../ti-soc-thermal/omap5-thermal-data.c | 16 +- drivers/staging/ti-soc-thermal/ti-bandgap.c | 452 +++++++++--------- drivers/staging/ti-soc-thermal/ti-bandgap.h | 123 +++-- .../ti-soc-thermal/ti-thermal-common.c | 172 +++---- drivers/staging/ti-soc-thermal/ti-thermal.h | 26 +- 6 files changed, 421 insertions(+), 432 deletions(-) diff --git a/drivers/staging/ti-soc-thermal/omap4-thermal-data.c b/drivers/staging/ti-soc-thermal/omap4-thermal-data.c index 97544f79f493..49d032467739 100644 --- a/drivers/staging/ti-soc-thermal/omap4-thermal-data.c +++ b/drivers/staging/ti-soc-thermal/omap4-thermal-data.c @@ -66,17 +66,17 @@ omap4430_adc_to_temp[OMAP4430_ADC_END_VALUE - OMAP4430_ADC_START_VALUE + 1] = { }; /* OMAP4430 data */ -const struct omap_bandgap_data omap4430_data = { - .features = OMAP_BANDGAP_FEATURE_MODE_CONFIG | - OMAP_BANDGAP_FEATURE_CLK_CTRL | - OMAP_BANDGAP_FEATURE_POWER_SWITCH, +const struct ti_bandgap_data omap4430_data = { + .features = TI_BANDGAP_FEATURE_MODE_CONFIG | + TI_BANDGAP_FEATURE_CLK_CTRL | + TI_BANDGAP_FEATURE_POWER_SWITCH, .fclock_name = "bandgap_fclk", .div_ck_name = "bandgap_fclk", .conv_table = omap4430_adc_to_temp, .adc_start_val = OMAP4430_ADC_START_VALUE, .adc_end_val = OMAP4430_ADC_END_VALUE, - .expose_sensor = omap_thermal_expose_sensor, - .remove_sensor = omap_thermal_remove_sensor, + .expose_sensor = ti_thermal_expose_sensor, + .remove_sensor = ti_thermal_remove_sensor, .sensors = { { .registers = &omap4430_mpu_temp_sensor_registers, @@ -86,8 +86,8 @@ const struct omap_bandgap_data omap4430_data = { .constant = 20000, .slope_pcb = 0, .constant_pcb = 20000, - .register_cooling = omap_thermal_register_cpu_cooling, - .unregister_cooling = omap_thermal_unregister_cpu_cooling, + .register_cooling = ti_thermal_register_cpu_cooling, + .unregister_cooling = ti_thermal_unregister_cpu_cooling, }, }, .sensor_count = 1, @@ -201,21 +201,21 @@ omap4460_adc_to_temp[OMAP4460_ADC_END_VALUE - OMAP4460_ADC_START_VALUE + 1] = { }; /* OMAP4460 data */ -const struct omap_bandgap_data omap4460_data = { - .features = OMAP_BANDGAP_FEATURE_TSHUT | - OMAP_BANDGAP_FEATURE_TSHUT_CONFIG | - OMAP_BANDGAP_FEATURE_TALERT | - OMAP_BANDGAP_FEATURE_MODE_CONFIG | - OMAP_BANDGAP_FEATURE_POWER_SWITCH | - OMAP_BANDGAP_FEATURE_CLK_CTRL | - OMAP_BANDGAP_FEATURE_COUNTER, +const struct ti_bandgap_data omap4460_data = { + .features = TI_BANDGAP_FEATURE_TSHUT | + TI_BANDGAP_FEATURE_TSHUT_CONFIG | + TI_BANDGAP_FEATURE_TALERT | + TI_BANDGAP_FEATURE_MODE_CONFIG | + TI_BANDGAP_FEATURE_POWER_SWITCH | + TI_BANDGAP_FEATURE_CLK_CTRL | + TI_BANDGAP_FEATURE_COUNTER, .fclock_name = "bandgap_ts_fclk", .div_ck_name = "div_ts_ck", .conv_table = omap4460_adc_to_temp, .adc_start_val = OMAP4460_ADC_START_VALUE, .adc_end_val = OMAP4460_ADC_END_VALUE, - .expose_sensor = omap_thermal_expose_sensor, - .remove_sensor = omap_thermal_remove_sensor, + .expose_sensor = ti_thermal_expose_sensor, + .remove_sensor = ti_thermal_remove_sensor, .sensors = { { .registers = &omap4460_mpu_temp_sensor_registers, @@ -225,29 +225,29 @@ const struct omap_bandgap_data omap4460_data = { .constant = OMAP_GRADIENT_CONST_4460, .slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4460, .constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4460, - .register_cooling = omap_thermal_register_cpu_cooling, - .unregister_cooling = omap_thermal_unregister_cpu_cooling, + .register_cooling = ti_thermal_register_cpu_cooling, + .unregister_cooling = ti_thermal_unregister_cpu_cooling, }, }, .sensor_count = 1, }; /* OMAP4470 data */ -const struct omap_bandgap_data omap4470_data = { - .features = OMAP_BANDGAP_FEATURE_TSHUT | - OMAP_BANDGAP_FEATURE_TSHUT_CONFIG | - OMAP_BANDGAP_FEATURE_TALERT | - OMAP_BANDGAP_FEATURE_MODE_CONFIG | - OMAP_BANDGAP_FEATURE_POWER_SWITCH | - OMAP_BANDGAP_FEATURE_CLK_CTRL | - OMAP_BANDGAP_FEATURE_COUNTER, +const struct ti_bandgap_data omap4470_data = { + .features = TI_BANDGAP_FEATURE_TSHUT | + TI_BANDGAP_FEATURE_TSHUT_CONFIG | + TI_BANDGAP_FEATURE_TALERT | + TI_BANDGAP_FEATURE_MODE_CONFIG | + TI_BANDGAP_FEATURE_POWER_SWITCH | + TI_BANDGAP_FEATURE_CLK_CTRL | + TI_BANDGAP_FEATURE_COUNTER, .fclock_name = "bandgap_ts_fclk", .div_ck_name = "div_ts_ck", .conv_table = omap4460_adc_to_temp, .adc_start_val = OMAP4460_ADC_START_VALUE, .adc_end_val = OMAP4460_ADC_END_VALUE, - .expose_sensor = omap_thermal_expose_sensor, - .remove_sensor = omap_thermal_remove_sensor, + .expose_sensor = ti_thermal_expose_sensor, + .remove_sensor = ti_thermal_remove_sensor, .sensors = { { .registers = &omap4460_mpu_temp_sensor_registers, @@ -257,8 +257,8 @@ const struct omap_bandgap_data omap4470_data = { .constant = OMAP_GRADIENT_CONST_4470, .slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4470, .constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4470, - .register_cooling = omap_thermal_register_cpu_cooling, - .unregister_cooling = omap_thermal_unregister_cpu_cooling, + .register_cooling = ti_thermal_register_cpu_cooling, + .unregister_cooling = ti_thermal_unregister_cpu_cooling, }, }, .sensor_count = 1, diff --git a/drivers/staging/ti-soc-thermal/omap5-thermal-data.c b/drivers/staging/ti-soc-thermal/omap5-thermal-data.c index 172b4ada0119..0afe9c807dec 100644 --- a/drivers/staging/ti-soc-thermal/omap5-thermal-data.c +++ b/drivers/staging/ti-soc-thermal/omap5-thermal-data.c @@ -312,24 +312,24 @@ omap5430_adc_to_temp[ /* OMAP54xx ES2.0 data */ /* TODO : Need to update the slope/constant for ES2.0 silicon */ -const struct omap_bandgap_data omap5430_data = { - .features = OMAP_BANDGAP_FEATURE_TSHUT_CONFIG | - OMAP_BANDGAP_FEATURE_FREEZE_BIT | - OMAP_BANDGAP_FEATURE_TALERT, +const struct ti_bandgap_data omap5430_data = { + .features = TI_BANDGAP_FEATURE_TSHUT_CONFIG | + TI_BANDGAP_FEATURE_FREEZE_BIT | + TI_BANDGAP_FEATURE_TALERT, .fclock_name = "l3instr_ts_gclk_div", .div_ck_name = "l3instr_ts_gclk_div", .conv_table = omap5430_adc_to_temp, .adc_start_val = OMAP5430_ADC_START_VALUE, .adc_end_val = OMAP5430_ADC_END_VALUE, - .expose_sensor = omap_thermal_expose_sensor, - .remove_sensor = omap_thermal_remove_sensor, + .expose_sensor = ti_thermal_expose_sensor, + .remove_sensor = ti_thermal_remove_sensor, .sensors = { { .registers = &omap5430_mpu_temp_sensor_registers, .ts_data = &omap5430_mpu_temp_sensor_data, .domain = "cpu", - .register_cooling = omap_thermal_register_cpu_cooling, - .unregister_cooling = omap_thermal_unregister_cpu_cooling, + .register_cooling = ti_thermal_register_cpu_cooling, + .unregister_cooling = ti_thermal_unregister_cpu_cooling, .slope = OMAP_GRADIENT_SLOPE_5430_CPU, .constant = OMAP_GRADIENT_CONST_5430_CPU, .slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_5430_CPU, diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c index 5a8ae9c115ea..a09ebfc6a9ba 100644 --- a/drivers/staging/ti-soc-thermal/ti-bandgap.c +++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c @@ -1,5 +1,5 @@ /* - * OMAP4 Bandgap temperature sensor driver + * TI Bandgap temperature sensor driver * * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ * Author: J Keerthy @@ -45,27 +45,27 @@ /*** Helper functions to access registers and their bitfields ***/ /** - * omap_bandgap_readl() - simple read helper function - * @bgp: pointer to omap_bandgap structure + * ti_bandgap_readl() - simple read helper function + * @bgp: pointer to ti_bandgap structure * @reg: desired register (offset) to be read * * Helper function to read bandgap registers. It uses the io remapped area. * Returns the register value. */ -static u32 omap_bandgap_readl(struct omap_bandgap *bgp, u32 reg) +static u32 ti_bandgap_readl(struct ti_bandgap *bgp, u32 reg) { return readl(bgp->base + reg); } /** - * omap_bandgap_writel() - simple write helper function - * @bgp: pointer to omap_bandgap structure + * ti_bandgap_writel() - simple write helper function + * @bgp: pointer to ti_bandgap structure * @val: desired register value to be written * @reg: desired register (offset) to be written * * Helper function to write bandgap registers. It uses the io remapped area. */ -static void omap_bandgap_writel(struct omap_bandgap *bgp, u32 val, u32 reg) +static void ti_bandgap_writel(struct ti_bandgap *bgp, u32 val, u32 reg) { writel(val, bgp->base + reg); } @@ -82,27 +82,27 @@ do { \ u32 r; \ \ t = bgp->conf->sensors[(id)].registers; \ - r = omap_bandgap_readl(bgp, t->reg); \ + r = ti_bandgap_readl(bgp, t->reg); \ r &= ~t->mask; \ r |= (val) << __ffs(t->mask); \ - omap_bandgap_writel(bgp, r, t->reg); \ + ti_bandgap_writel(bgp, r, t->reg); \ } while (0) /*** Basic helper functions ***/ /** - * omap_bandgap_power() - controls the power state of a bandgap device - * @bgp: pointer to omap_bandgap structure + * ti_bandgap_power() - controls the power state of a bandgap device + * @bgp: pointer to ti_bandgap structure * @on: desired power state (1 - on, 0 - off) * * Used to power on/off a bandgap device instance. Only used on those * that features tempsoff bit. */ -static int omap_bandgap_power(struct omap_bandgap *bgp, bool on) +static int ti_bandgap_power(struct ti_bandgap *bgp, bool on) { int i; - if (!OMAP_BANDGAP_HAS(bgp, POWER_SWITCH)) + if (!TI_BANDGAP_HAS(bgp, POWER_SWITCH)) goto exit; for (i = 0; i < bgp->conf->sensor_count; i++) @@ -114,8 +114,8 @@ exit: } /** - * omap_bandgap_read_temp() - helper function to read sensor temperature - * @bgp: pointer to omap_bandgap structure + * ti_bandgap_read_temp() - helper function to read sensor temperature + * @bgp: pointer to ti_bandgap structure * @id: bandgap sensor id * * Function to concentrate the steps to read sensor temperature register. @@ -123,7 +123,7 @@ exit: * it might be needed to freeze the bandgap state machine, before fetching * the register value. */ -static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id) +static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id) { struct temp_sensor_registers *tsr; u32 temp, reg; @@ -131,7 +131,7 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id) tsr = bgp->conf->sensors[id].registers; reg = tsr->temp_sensor_ctrl; - if (OMAP_BANDGAP_HAS(bgp, FREEZE_BIT)) { + if (TI_BANDGAP_HAS(bgp, FREEZE_BIT)) { RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1); /* * In case we cannot read from cur_dtemp / dtemp_0, @@ -141,10 +141,10 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id) } /* read temperature */ - temp = omap_bandgap_readl(bgp, reg); + temp = ti_bandgap_readl(bgp, reg); temp &= tsr->bgap_dtemp_mask; - if (OMAP_BANDGAP_HAS(bgp, FREEZE_BIT)) + if (TI_BANDGAP_HAS(bgp, FREEZE_BIT)) RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0); return temp; @@ -153,9 +153,9 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id) /*** IRQ handlers ***/ /** - * omap_bandgap_talert_irq_handler() - handles Temperature alert IRQs + * ti_bandgap_talert_irq_handler() - handles Temperature alert IRQs * @irq: IRQ number - * @data: private data (struct omap_bandgap *) + * @data: private data (struct ti_bandgap *) * * This is the Talert handler. Use it only if bandgap device features * HAS(TALERT). This handler goes over all sensors and checks their @@ -163,9 +163,9 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id) * it will reset the event mask to wait for the opposite event (next event). * Every time there is a new event, it will be reported to thermal layer. */ -static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data) +static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data) { - struct omap_bandgap *bgp = data; + struct ti_bandgap *bgp = data; struct temp_sensor_registers *tsr; u32 t_hot = 0, t_cold = 0, ctrl; int i; @@ -173,7 +173,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data) spin_lock(&bgp->lock); for (i = 0; i < bgp->conf->sensor_count; i++) { tsr = bgp->conf->sensors[i].registers; - ctrl = omap_bandgap_readl(bgp, tsr->bgap_status); + ctrl = ti_bandgap_readl(bgp, tsr->bgap_status); /* Read the status of t_hot */ t_hot = ctrl & tsr->status_hot_mask; @@ -184,7 +184,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data) if (!t_cold && !t_hot) continue; - ctrl = omap_bandgap_readl(bgp, tsr->bgap_mask_ctrl); + ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl); /* * One TALERT interrupt: Two sources * If the interrupt is due to t_hot then mask t_hot and @@ -198,7 +198,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data) ctrl |= tsr->mask_hot_mask; } - omap_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl); + ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl); dev_dbg(bgp->dev, "%s: IRQ from %s sensor: hotevent %d coldevent %d\n", @@ -215,7 +215,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data) } /** - * omap_bandgap_tshut_irq_handler() - handles Temperature shutdown signal + * ti_bandgap_tshut_irq_handler() - handles Temperature shutdown signal * @irq: IRQ number * @data: private data (unused) * @@ -223,7 +223,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data) * HAS(TSHUT). If any sensor fires the Tshut signal, we simply shutdown * the system. */ -static irqreturn_t omap_bandgap_tshut_irq_handler(int irq, void *data) +static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data) { pr_emerg("%s: TSHUT temperature reached. Needs shut down...\n", __func__); @@ -236,8 +236,8 @@ static irqreturn_t omap_bandgap_tshut_irq_handler(int irq, void *data) /*** Helper functions which manipulate conversion ADC <-> mi Celsius ***/ /** - * omap_bandgap_adc_to_mcelsius() - converts an ADC value to mCelsius scale - * @bgp: struct omap_bandgap pointer + * ti_bandgap_adc_to_mcelsius() - converts an ADC value to mCelsius scale + * @bgp: struct ti_bandgap pointer * @adc_val: value in ADC representation * @t: address where to write the resulting temperature in mCelsius * @@ -246,10 +246,9 @@ static irqreturn_t omap_bandgap_tshut_irq_handler(int irq, void *data) * The conversion table is indexed by the ADC values. */ static -int omap_bandgap_adc_to_mcelsius(struct omap_bandgap *bgp, - int adc_val, int *t) +int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t) { - struct omap_bandgap_data *conf = bgp->conf; + struct ti_bandgap_data *conf = bgp->conf; int ret = 0; /* look up for temperature in the table and return the temperature */ @@ -265,8 +264,8 @@ exit: } /** - * omap_bandgap_mcelsius_to_adc() - converts a mCelsius value to ADC scale - * @bgp: struct omap_bandgap pointer + * ti_bandgap_mcelsius_to_adc() - converts a mCelsius value to ADC scale + * @bgp: struct ti_bandgap pointer * @temp: value in mCelsius * @adc: address where to write the resulting temperature in ADC representation * @@ -275,10 +274,9 @@ exit: * The conversion table is indexed by the ADC values. */ static -int omap_bandgap_mcelsius_to_adc(struct omap_bandgap *bgp, long temp, - int *adc) +int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc) { - struct omap_bandgap_data *conf = bgp->conf; + struct ti_bandgap_data *conf = bgp->conf; const int *conv_table = bgp->conf->conv_table; int high, low, mid, ret = 0; @@ -306,8 +304,8 @@ exit: } /** - * omap_bandgap_add_hyst() - add hysteresis (in mCelsius) to an ADC value - * @bgp: struct omap_bandgap pointer + * ti_bandgap_add_hyst() - add hysteresis (in mCelsius) to an ADC value + * @bgp: struct ti_bandgap pointer * @adc_val: temperature value in ADC representation * @hyst_val: hysteresis value in mCelsius * @sum: address where to write the resulting temperature (in ADC scale) @@ -316,8 +314,8 @@ exit: * Returns 0 on success, -ERANGE otherwise. */ static -int omap_bandgap_add_hyst(struct omap_bandgap *bgp, int adc_val, - int hyst_val, u32 *sum) +int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val, + u32 *sum) { int temp, ret; @@ -325,13 +323,13 @@ int omap_bandgap_add_hyst(struct omap_bandgap *bgp, int adc_val, * Need to add in the mcelsius domain, so we have a temperature * the conv_table range */ - ret = omap_bandgap_adc_to_mcelsius(bgp, adc_val, &temp); + ret = ti_bandgap_adc_to_mcelsius(bgp, adc_val, &temp); if (ret < 0) goto exit; temp += hyst_val; - ret = omap_bandgap_mcelsius_to_adc(bgp, temp, sum); + ret = ti_bandgap_mcelsius_to_adc(bgp, temp, sum); exit: return ret; @@ -340,25 +338,25 @@ exit: /*** Helper functions handling device Alert/Shutdown signals ***/ /** - * omap_bandgap_unmask_interrupts() - unmasks the events of thot & tcold - * @bgp: struct omap_bandgap pointer + * ti_bandgap_unmask_interrupts() - unmasks the events of thot & tcold + * @bgp: struct ti_bandgap pointer * @t_hot: hot temperature value to trigger alert signal * @t_cold: cold temperature value to trigger alert signal * * Checks the requested t_hot and t_cold values and configures the IRQ event * masks accordingly. Call this function only if bandgap features HAS(TALERT). */ -static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bgp, int id, - u32 t_hot, u32 t_cold) +static void ti_bandgap_unmask_interrupts(struct ti_bandgap *bgp, int id, + u32 t_hot, u32 t_cold) { struct temp_sensor_registers *tsr; u32 temp, reg_val; /* Read the current on die temperature */ - temp = omap_bandgap_read_temp(bgp, id); + temp = ti_bandgap_read_temp(bgp, id); tsr = bgp->conf->sensors[id].registers; - reg_val = omap_bandgap_readl(bgp, tsr->bgap_mask_ctrl); + reg_val = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl); if (temp < t_hot) reg_val |= tsr->mask_hot_mask; @@ -369,12 +367,12 @@ static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bgp, int id, reg_val |= tsr->mask_cold_mask; else reg_val &= ~tsr->mask_cold_mask; - omap_bandgap_writel(bgp, reg_val, tsr->bgap_mask_ctrl); + ti_bandgap_writel(bgp, reg_val, tsr->bgap_mask_ctrl); } /** - * omap_bandgap_update_alert_threshold() - sequence to update thresholds - * @bgp: struct omap_bandgap pointer + * ti_bandgap_update_alert_threshold() - sequence to update thresholds + * @bgp: struct ti_bandgap pointer * @id: bandgap sensor id * @val: value (ADC) of a new threshold * @hot: desired threshold to be updated. true if threshold hot, false if @@ -386,9 +384,8 @@ static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bgp, int id, * and configures the thresholds so that t_hot is always greater than t_cold. * Call this function only if bandgap features HAS(TALERT). */ -static -int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id, - int val, bool hot) +static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id, + int val, bool hot) { struct temp_sensor_data *ts_data = bgp->conf->sensors[id].ts_data; struct temp_sensor_registers *tsr; @@ -398,7 +395,7 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id, tsr = bgp->conf->sensors[id].registers; /* obtain the current value */ - thresh_val = omap_bandgap_readl(bgp, tsr->bgap_threshold); + thresh_val = ti_bandgap_readl(bgp, tsr->bgap_threshold); t_cold = (thresh_val & tsr->threshold_tcold_mask) >> __ffs(tsr->threshold_tcold_mask); t_hot = (thresh_val & tsr->threshold_thot_mask) >> @@ -410,13 +407,13 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id, if (t_cold < t_hot) { if (hot) - err = omap_bandgap_add_hyst(bgp, t_hot, - -ts_data->hyst_val, - &t_cold); + err = ti_bandgap_add_hyst(bgp, t_hot, + -ts_data->hyst_val, + &t_cold); else - err = omap_bandgap_add_hyst(bgp, t_cold, - ts_data->hyst_val, - &t_hot); + err = ti_bandgap_add_hyst(bgp, t_cold, + ts_data->hyst_val, + &t_hot); } /* write the new threshold values */ @@ -424,7 +421,7 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id, reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask)); reg_val |= thresh_val & ~tsr->threshold_tcold_mask; reg_val |= (t_cold << __ffs(tsr->threshold_tcold_mask)); - omap_bandgap_writel(bgp, reg_val, tsr->bgap_threshold); + ti_bandgap_writel(bgp, reg_val, tsr->bgap_threshold); if (err) { dev_err(bgp->dev, "failed to reprogram thot threshold\n"); @@ -432,20 +429,20 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id, goto exit; } - omap_bandgap_unmask_interrupts(bgp, id, t_hot, t_cold); + ti_bandgap_unmask_interrupts(bgp, id, t_hot, t_cold); exit: return err; } /** - * omap_bandgap_validate() - helper to check the sanity of a struct omap_bandgap - * @bgp: struct omap_bandgap pointer + * ti_bandgap_validate() - helper to check the sanity of a struct ti_bandgap + * @bgp: struct ti_bandgap pointer * @id: bandgap sensor id * * Checks if the bandgap pointer is valid and if the sensor id is also * applicable. */ -static inline int omap_bandgap_validate(struct omap_bandgap *bgp, int id) +static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id) { int ret = 0; @@ -466,8 +463,8 @@ exit: } /** - * _omap_bandgap_write_threshold() - helper to update TALERT t_cold or t_hot - * @bgp: struct omap_bandgap pointer + * _ti_bandgap_write_threshold() - helper to update TALERT t_cold or t_hot + * @bgp: struct ti_bandgap pointer * @id: bandgap sensor id * @val: value (mCelsius) of a new threshold * @hot: desired threshold to be updated. true if threshold hot, false if @@ -478,19 +475,19 @@ exit: * Validates the mCelsius range and update the requested threshold. * Call this function only if bandgap features HAS(TALERT). */ -int _omap_bandgap_write_threshold(struct omap_bandgap *bgp, int id, int val, - bool hot) +int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val, + bool hot) { struct temp_sensor_data *ts_data; struct temp_sensor_registers *tsr; u32 adc_val; int ret; - ret = omap_bandgap_validate(bgp, id); + ret = ti_bandgap_validate(bgp, id); if (ret) goto exit; - if (!OMAP_BANDGAP_HAS(bgp, TALERT)) { + if (!TI_BANDGAP_HAS(bgp, TALERT)) { ret = -ENOTSUPP; goto exit; } @@ -508,12 +505,12 @@ int _omap_bandgap_write_threshold(struct omap_bandgap *bgp, int id, int val, if (ret) goto exit; - ret = omap_bandgap_mcelsius_to_adc(bgp, val, &adc_val); + ret = ti_bandgap_mcelsius_to_adc(bgp, val, &adc_val); if (ret < 0) goto exit; spin_lock(&bgp->lock); - omap_bandgap_update_alert_threshold(bgp, id, adc_val, hot); + ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot); spin_unlock(&bgp->lock); exit: @@ -521,8 +518,8 @@ exit: } /** - * _omap_bandgap_read_threshold() - helper to read TALERT t_cold or t_hot - * @bgp: struct omap_bandgap pointer + * _ti_bandgap_read_threshold() - helper to read TALERT t_cold or t_hot + * @bgp: struct ti_bandgap pointer * @id: bandgap sensor id * @val: value (mCelsius) of a threshold * @hot: desired threshold to be read. true if threshold hot, false if @@ -532,18 +529,18 @@ exit: * This function can be used to read t_hot or t_cold, depending on @hot value. * Call this function only if bandgap features HAS(TALERT). */ -int _omap_bandgap_read_threshold(struct omap_bandgap *bgp, int id, - int *val, bool hot) +int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id, + int *val, bool hot) { struct temp_sensor_registers *tsr; u32 temp, mask; int ret = 0; - ret = omap_bandgap_validate(bgp, id); + ret = ti_bandgap_validate(bgp, id); if (ret) goto exit; - if (!OMAP_BANDGAP_HAS(bgp, TALERT)) { + if (!TI_BANDGAP_HAS(bgp, TALERT)) { ret = -ENOTSUPP; goto exit; } @@ -554,9 +551,9 @@ int _omap_bandgap_read_threshold(struct omap_bandgap *bgp, int id, else mask = tsr->threshold_tcold_mask; - temp = omap_bandgap_readl(bgp, tsr->bgap_threshold); + temp = ti_bandgap_readl(bgp, tsr->bgap_threshold); temp = (temp & mask) >> __ffs(mask); - ret |= omap_bandgap_adc_to_mcelsius(bgp, temp, &temp); + ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp); if (ret) { dev_err(bgp->dev, "failed to read thot\n"); ret = -EIO; @@ -572,83 +569,81 @@ exit: /*** Exposed APIs ***/ /** - * omap_bandgap_read_thot() - reads sensor current thot + * ti_bandgap_read_thot() - reads sensor current thot * @bgp - pointer to bandgap instance * @id - sensor id * @thot - resulting current thot value * * returns 0 on success or the proper error code */ -int omap_bandgap_read_thot(struct omap_bandgap *bgp, int id, - int *thot) +int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot) { - return _omap_bandgap_read_threshold(bgp, id, thot, true); + return _ti_bandgap_read_threshold(bgp, id, thot, true); } /** - * omap_bandgap_write_thot() - sets sensor current thot + * ti_bandgap_write_thot() - sets sensor current thot * @bgp - pointer to bandgap instance * @id - sensor id * @val - desired thot value * * returns 0 on success or the proper error code */ -int omap_bandgap_write_thot(struct omap_bandgap *bgp, int id, int val) +int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val) { - return _omap_bandgap_write_threshold(bgp, id, val, true); + return _ti_bandgap_write_threshold(bgp, id, val, true); } /** - * omap_bandgap_read_tcold() - reads sensor current tcold + * ti_bandgap_read_tcold() - reads sensor current tcold * @bgp - pointer to bandgap instance * @id - sensor id * @tcold - resulting current tcold value * * returns 0 on success or the proper error code */ -int omap_bandgap_read_tcold(struct omap_bandgap *bgp, int id, - int *tcold) +int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold) { - return _omap_bandgap_read_threshold(bgp, id, tcold, false); + return _ti_bandgap_read_threshold(bgp, id, tcold, false); } /** - * omap_bandgap_write_tcold() - sets the sensor tcold + * ti_bandgap_write_tcold() - sets the sensor tcold * @bgp - pointer to bandgap instance * @id - sensor id * @val - desired tcold value * * returns 0 on success or the proper error code */ -int omap_bandgap_write_tcold(struct omap_bandgap *bgp, int id, int val) +int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val) { - return _omap_bandgap_write_threshold(bgp, id, val, false); + return _ti_bandgap_write_threshold(bgp, id, val, false); } /** - * omap_bandgap_read_update_interval() - read the sensor update interval + * ti_bandgap_read_update_interval() - read the sensor update interval * @bgp - pointer to bandgap instance * @id - sensor id * @interval - resulting update interval in miliseconds * * returns 0 on success or the proper error code */ -int omap_bandgap_read_update_interval(struct omap_bandgap *bgp, int id, - int *interval) +int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id, + int *interval) { struct temp_sensor_registers *tsr; u32 time; int ret; - ret = omap_bandgap_validate(bgp, id); + ret = ti_bandgap_validate(bgp, id); if (ret) return ret; - if (!OMAP_BANDGAP_HAS(bgp, COUNTER)) + if (!TI_BANDGAP_HAS(bgp, COUNTER)) return -ENOTSUPP; tsr = bgp->conf->sensors[id].registers; - time = omap_bandgap_readl(bgp, tsr->bgap_counter); + time = ti_bandgap_readl(bgp, tsr->bgap_counter); time = (time & tsr->counter_mask) >> __ffs(tsr->counter_mask); time = time * 1000 / bgp->clk_rate; @@ -658,21 +653,21 @@ int omap_bandgap_read_update_interval(struct omap_bandgap *bgp, int id, } /** - * omap_bandgap_write_update_interval() - set the update interval + * ti_bandgap_write_update_interval() - set the update interval * @bgp - pointer to bandgap instance * @id - sensor id * @interval - desired update interval in miliseconds * * returns 0 on success or the proper error code */ -int omap_bandgap_write_update_interval(struct omap_bandgap *bgp, - int id, u32 interval) +int ti_bandgap_write_update_interval(struct ti_bandgap *bgp, + int id, u32 interval) { - int ret = omap_bandgap_validate(bgp, id); + int ret = ti_bandgap_validate(bgp, id); if (ret) return ret; - if (!OMAP_BANDGAP_HAS(bgp, COUNTER)) + if (!TI_BANDGAP_HAS(bgp, COUNTER)) return -ENOTSUPP; interval = interval * bgp->clk_rate / 1000; @@ -684,28 +679,28 @@ int omap_bandgap_write_update_interval(struct omap_bandgap *bgp, } /** - * omap_bandgap_read_temperature() - report current temperature + * ti_bandgap_read_temperature() - report current temperature * @bgp - pointer to bandgap instance * @id - sensor id * @temperature - resulting temperature * * returns 0 on success or the proper error code */ -int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id, - int *temperature) +int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id, + int *temperature) { u32 temp; int ret; - ret = omap_bandgap_validate(bgp, id); + ret = ti_bandgap_validate(bgp, id); if (ret) return ret; spin_lock(&bgp->lock); - temp = omap_bandgap_read_temp(bgp, id); + temp = ti_bandgap_read_temp(bgp, id); spin_unlock(&bgp->lock); - ret |= omap_bandgap_adc_to_mcelsius(bgp, temp, &temp); + ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp); if (ret) return -EIO; @@ -715,7 +710,7 @@ int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id, } /** - * omap_bandgap_set_sensor_data() - helper function to store thermal + * ti_bandgap_set_sensor_data() - helper function to store thermal * framework related data. * @bgp - pointer to bandgap instance * @id - sensor id @@ -723,10 +718,9 @@ int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id, * * returns 0 on success or the proper error code */ -int omap_bandgap_set_sensor_data(struct omap_bandgap *bgp, int id, - void *data) +int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data) { - int ret = omap_bandgap_validate(bgp, id); + int ret = ti_bandgap_validate(bgp, id); if (ret) return ret; @@ -736,16 +730,16 @@ int omap_bandgap_set_sensor_data(struct omap_bandgap *bgp, int id, } /** - * omap_bandgap_get_sensor_data() - helper function to get thermal + * ti_bandgap_get_sensor_data() - helper function to get thermal * framework related data. * @bgp - pointer to bandgap instance * @id - sensor id * * returns data stored by set function with sensor id on success or NULL */ -void *omap_bandgap_get_sensor_data(struct omap_bandgap *bgp, int id) +void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id) { - int ret = omap_bandgap_validate(bgp, id); + int ret = ti_bandgap_validate(bgp, id); if (ret) return ERR_PTR(ret); @@ -755,29 +749,29 @@ void *omap_bandgap_get_sensor_data(struct omap_bandgap *bgp, int id) /*** Helper functions used during device initialization ***/ /** - * omap_bandgap_force_single_read() - executes 1 single ADC conversion - * @bgp: pointer to struct omap_bandgap + * ti_bandgap_force_single_read() - executes 1 single ADC conversion + * @bgp: pointer to struct ti_bandgap * @id: sensor id which it is desired to read 1 temperature * * Used to initialize the conversion state machine and set it to a valid * state. Called during device initialization and context restore events. */ static int -omap_bandgap_force_single_read(struct omap_bandgap *bgp, int id) +ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id) { u32 temp = 0, counter = 1000; /* Select single conversion mode */ - if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG)) + if (TI_BANDGAP_HAS(bgp, MODE_CONFIG)) RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0); /* Start of Conversion = 1 */ RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1); /* Wait until DTEMP is updated */ - temp = omap_bandgap_read_temp(bgp, id); + temp = ti_bandgap_read_temp(bgp, id); while ((temp == 0) && --counter) - temp = omap_bandgap_read_temp(bgp, id); + temp = ti_bandgap_read_temp(bgp, id); /* REVISIT: Check correct condition for end of conversion */ /* Start of Conversion = 0 */ @@ -787,21 +781,21 @@ omap_bandgap_force_single_read(struct omap_bandgap *bgp, int id) } /** - * omap_bandgap_set_continous_mode() - One time enabling of continuous mode - * @bgp: pointer to struct omap_bandgap + * ti_bandgap_set_continous_mode() - One time enabling of continuous mode + * @bgp: pointer to struct ti_bandgap * * Call this function only if HAS(MODE_CONFIG) is set. As this driver may * be used for junction temperature monitoring, it is desirable that the * sensors are operational all the time, so that alerts are generated * properly. */ -static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bgp) +static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp) { int i; for (i = 0; i < bgp->conf->sensor_count; i++) { /* Perform a single read just before enabling continuous */ - omap_bandgap_force_single_read(bgp, i); + ti_bandgap_force_single_read(bgp, i); RMW_BITS(bgp, i, bgap_mode_ctrl, mode_ctrl_mask, 1); } @@ -809,8 +803,8 @@ static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bgp) } /** - * omap_bandgap_tshut_init() - setup and initialize tshut handling - * @bgp: pointer to struct omap_bandgap + * ti_bandgap_tshut_init() - setup and initialize tshut handling + * @bgp: pointer to struct ti_bandgap * @pdev: pointer to device struct platform_device * * Call this function only in case the bandgap features HAS(TSHUT). @@ -820,8 +814,8 @@ static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bgp) * one of the bandgap sensors violates the TSHUT high/hot threshold. * And in that case, the system must go off. */ -static int omap_bandgap_tshut_init(struct omap_bandgap *bgp, - struct platform_device *pdev) +static int ti_bandgap_tshut_init(struct ti_bandgap *bgp, + struct platform_device *pdev) { int gpio_nr = bgp->tshut_gpio; int status; @@ -838,10 +832,8 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bgp, return status; } - status = request_irq(gpio_to_irq(gpio_nr), - omap_bandgap_tshut_irq_handler, - IRQF_TRIGGER_RISING, "tshut", - NULL); + status = request_irq(gpio_to_irq(gpio_nr), ti_bandgap_tshut_irq_handler, + IRQF_TRIGGER_RISING, "tshut", NULL); if (status) { gpio_free(gpio_nr); dev_err(bgp->dev, "request irq failed for TSHUT"); @@ -851,8 +843,8 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bgp, } /** - * omap_bandgap_alert_init() - setup and initialize talert handling - * @bgp: pointer to struct omap_bandgap + * ti_bandgap_alert_init() - setup and initialize talert handling + * @bgp: pointer to struct ti_bandgap * @pdev: pointer to device struct platform_device * * Call this function only in case the bandgap features HAS(TALERT). @@ -861,8 +853,8 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bgp, * are violated. In these situation, the driver must reprogram the thresholds, * accordingly to specified policy. */ -static int omap_bandgap_talert_init(struct omap_bandgap *bgp, - struct platform_device *pdev) +static int ti_bandgap_talert_init(struct ti_bandgap *bgp, + struct platform_device *pdev) { int ret; @@ -872,7 +864,7 @@ static int omap_bandgap_talert_init(struct omap_bandgap *bgp, return bgp->irq; } ret = request_threaded_irq(bgp->irq, NULL, - omap_bandgap_talert_irq_handler, + ti_bandgap_talert_irq_handler, IRQF_TRIGGER_HIGH | IRQF_ONESHOT, "talert", bgp); if (ret) { @@ -884,20 +876,20 @@ static int omap_bandgap_talert_init(struct omap_bandgap *bgp, } /** - * omap_bandgap_build() - parse DT and setup a struct omap_bandgap - * @bgp: pointer to struct omap_bandgap + * ti_bandgap_build() - parse DT and setup a struct ti_bandgap + * @bgp: pointer to struct ti_bandgap * @pdev: pointer to device struct platform_device * * Used to read the device tree properties accordingly to the bandgap * matching version. Based on bandgap version and its capabilities it - * will build a struct omap_bandgap out of the required DT entries. + * will build a struct ti_bandgap out of the required DT entries. */ -static const struct of_device_id of_omap_bandgap_match[]; -static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev) +static const struct of_device_id of_ti_bandgap_match[]; +static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; const struct of_device_id *of_id; - struct omap_bandgap *bgp; + struct ti_bandgap *bgp; struct resource *res; u32 prop; int i; @@ -908,14 +900,14 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev) return ERR_PTR(-EINVAL); } - bgp = devm_kzalloc(&pdev->dev, sizeof(struct omap_bandgap), + bgp = devm_kzalloc(&pdev->dev, sizeof(struct ti_bandgap), GFP_KERNEL); if (!bgp) { dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n"); return ERR_PTR(-ENOMEM); } - of_id = of_match_device(of_omap_bandgap_match, &pdev->dev); + of_id = of_match_device(of_ti_bandgap_match, &pdev->dev); if (of_id) bgp->conf = of_id->data; @@ -935,7 +927,7 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev) i++; } while (res); - if (OMAP_BANDGAP_HAS(bgp, TSHUT)) { + if (TI_BANDGAP_HAS(bgp, TSHUT)) { if (of_property_read_u32(node, "ti,tshut-gpio", &prop) < 0) { dev_err(&pdev->dev, "missing tshut gpio in device tree\n"); return ERR_PTR(-EINVAL); @@ -954,20 +946,20 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev) /*** Device driver call backs ***/ static -int omap_bandgap_probe(struct platform_device *pdev) +int ti_bandgap_probe(struct platform_device *pdev) { - struct omap_bandgap *bgp; + struct ti_bandgap *bgp; int clk_rate, ret = 0, i; - bgp = omap_bandgap_build(pdev); + bgp = ti_bandgap_build(pdev); if (IS_ERR_OR_NULL(bgp)) { dev_err(&pdev->dev, "failed to fetch platform data\n"); return PTR_ERR(bgp); } bgp->dev = &pdev->dev; - if (OMAP_BANDGAP_HAS(bgp, TSHUT)) { - ret = omap_bandgap_tshut_init(bgp, pdev); + if (TI_BANDGAP_HAS(bgp, TSHUT)) { + ret = ti_bandgap_tshut_init(bgp, pdev); if (ret) { dev_err(&pdev->dev, "failed to initialize system tshut IRQ\n"); @@ -1000,7 +992,7 @@ int omap_bandgap_probe(struct platform_device *pdev) * it is an untrimmed sample and the temperatures * may not be accurate */ - val = omap_bandgap_readl(bgp, tsr->bgap_efuse); + val = ti_bandgap_readl(bgp, tsr->bgap_efuse); if (ret || !val) dev_info(&pdev->dev, "Non-trimmed BGAP, Temp not accurate\n"); @@ -1020,7 +1012,7 @@ int omap_bandgap_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Cannot re-set clock rate. Continuing\n"); bgp->clk_rate = clk_rate; - if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL)) + if (TI_BANDGAP_HAS(bgp, CLK_CTRL)) clk_prepare_enable(bgp->fclock); @@ -1028,10 +1020,10 @@ int omap_bandgap_probe(struct platform_device *pdev) bgp->dev = &pdev->dev; platform_set_drvdata(pdev, bgp); - omap_bandgap_power(bgp, true); + ti_bandgap_power(bgp, true); /* Set default counter to 1 for now */ - if (OMAP_BANDGAP_HAS(bgp, COUNTER)) + if (TI_BANDGAP_HAS(bgp, COUNTER)) for (i = 0; i < bgp->conf->sensor_count; i++) RMW_BITS(bgp, i, bgap_counter, counter_mask, 1); @@ -1041,7 +1033,7 @@ int omap_bandgap_probe(struct platform_device *pdev) ts_data = bgp->conf->sensors[i].ts_data; - if (OMAP_BANDGAP_HAS(bgp, TALERT)) { + if (TI_BANDGAP_HAS(bgp, TALERT)) { /* Set initial Talert thresholds */ RMW_BITS(bgp, i, bgap_threshold, threshold_tcold_mask, ts_data->t_cold); @@ -1052,7 +1044,7 @@ int omap_bandgap_probe(struct platform_device *pdev) RMW_BITS(bgp, i, bgap_mask_ctrl, mask_cold_mask, 1); } - if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG)) { + if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG)) { /* Set initial Tshut thresholds */ RMW_BITS(bgp, i, tshut_threshold, tshut_hot_mask, ts_data->tshut_hot); @@ -1061,11 +1053,11 @@ int omap_bandgap_probe(struct platform_device *pdev) } } - if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG)) - omap_bandgap_set_continuous_mode(bgp); + if (TI_BANDGAP_HAS(bgp, MODE_CONFIG)) + ti_bandgap_set_continuous_mode(bgp); /* Set .250 seconds time as default counter */ - if (OMAP_BANDGAP_HAS(bgp, COUNTER)) + if (TI_BANDGAP_HAS(bgp, COUNTER)) for (i = 0; i < bgp->conf->sensor_count; i++) RMW_BITS(bgp, i, bgap_counter, counter_mask, bgp->clk_rate / 4); @@ -1087,8 +1079,8 @@ int omap_bandgap_probe(struct platform_device *pdev) * might be called as soon as it is enabled where as rest of framework * is still getting initialised. */ - if (OMAP_BANDGAP_HAS(bgp, TALERT)) { - ret = omap_bandgap_talert_init(bgp, pdev); + if (TI_BANDGAP_HAS(bgp, TALERT)) { + ret = ti_bandgap_talert_init(bgp, pdev); if (ret) { dev_err(&pdev->dev, "failed to initialize Talert IRQ\n"); i = bgp->conf->sensor_count; @@ -1099,13 +1091,13 @@ int omap_bandgap_probe(struct platform_device *pdev) return 0; disable_clk: - if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL)) + if (TI_BANDGAP_HAS(bgp, CLK_CTRL)) clk_disable_unprepare(bgp->fclock); put_clks: clk_put(bgp->fclock); clk_put(bgp->div_clk); free_irqs: - if (OMAP_BANDGAP_HAS(bgp, TSHUT)) { + if (TI_BANDGAP_HAS(bgp, TSHUT)) { free_irq(gpio_to_irq(bgp->tshut_gpio), NULL); gpio_free(bgp->tshut_gpio); } @@ -1114,9 +1106,9 @@ free_irqs: } static -int omap_bandgap_remove(struct platform_device *pdev) +int ti_bandgap_remove(struct platform_device *pdev) { - struct omap_bandgap *bgp = platform_get_drvdata(pdev); + struct ti_bandgap *bgp = platform_get_drvdata(pdev); int i; /* First thing is to remove sensor interfaces */ @@ -1128,17 +1120,17 @@ int omap_bandgap_remove(struct platform_device *pdev) bgp->conf->remove_sensor(bgp, i); } - omap_bandgap_power(bgp, false); + ti_bandgap_power(bgp, false); - if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL)) + if (TI_BANDGAP_HAS(bgp, CLK_CTRL)) clk_disable_unprepare(bgp->fclock); clk_put(bgp->fclock); clk_put(bgp->div_clk); - if (OMAP_BANDGAP_HAS(bgp, TALERT)) + if (TI_BANDGAP_HAS(bgp, TALERT)) free_irq(bgp->irq, bgp); - if (OMAP_BANDGAP_HAS(bgp, TSHUT)) { + if (TI_BANDGAP_HAS(bgp, TSHUT)) { free_irq(gpio_to_irq(bgp->tshut_gpio), NULL); gpio_free(bgp->tshut_gpio); } @@ -1147,7 +1139,7 @@ int omap_bandgap_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int omap_bandgap_save_ctxt(struct omap_bandgap *bgp) +static int ti_bandgap_save_ctxt(struct ti_bandgap *bgp) { int i; @@ -1158,28 +1150,28 @@ static int omap_bandgap_save_ctxt(struct omap_bandgap *bgp) rval = &bgp->conf->sensors[i].regval; tsr = bgp->conf->sensors[i].registers; - if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG)) - rval->bg_mode_ctrl = omap_bandgap_readl(bgp, + if (TI_BANDGAP_HAS(bgp, MODE_CONFIG)) + rval->bg_mode_ctrl = ti_bandgap_readl(bgp, tsr->bgap_mode_ctrl); - if (OMAP_BANDGAP_HAS(bgp, COUNTER)) - rval->bg_counter = omap_bandgap_readl(bgp, + if (TI_BANDGAP_HAS(bgp, COUNTER)) + rval->bg_counter = ti_bandgap_readl(bgp, tsr->bgap_counter); - if (OMAP_BANDGAP_HAS(bgp, TALERT)) { - rval->bg_threshold = omap_bandgap_readl(bgp, + if (TI_BANDGAP_HAS(bgp, TALERT)) { + rval->bg_threshold = ti_bandgap_readl(bgp, tsr->bgap_threshold); - rval->bg_ctrl = omap_bandgap_readl(bgp, + rval->bg_ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl); } - if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG)) - rval->tshut_threshold = omap_bandgap_readl(bgp, + if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG)) + rval->tshut_threshold = ti_bandgap_readl(bgp, tsr->tshut_threshold); } return 0; } -static int omap_bandgap_restore_ctxt(struct omap_bandgap *bgp) +static int ti_bandgap_restore_ctxt(struct ti_bandgap *bgp) { int i; @@ -1191,70 +1183,70 @@ static int omap_bandgap_restore_ctxt(struct omap_bandgap *bgp) rval = &bgp->conf->sensors[i].regval; tsr = bgp->conf->sensors[i].registers; - if (OMAP_BANDGAP_HAS(bgp, COUNTER)) - val = omap_bandgap_readl(bgp, tsr->bgap_counter); + if (TI_BANDGAP_HAS(bgp, COUNTER)) + val = ti_bandgap_readl(bgp, tsr->bgap_counter); - if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG)) - omap_bandgap_writel(bgp, rval->tshut_threshold, - tsr->tshut_threshold); + if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG)) + ti_bandgap_writel(bgp, rval->tshut_threshold, + tsr->tshut_threshold); /* Force immediate temperature measurement and update * of the DTEMP field */ - omap_bandgap_force_single_read(bgp, i); - - if (OMAP_BANDGAP_HAS(bgp, COUNTER)) - omap_bandgap_writel(bgp, rval->bg_counter, - tsr->bgap_counter); - if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG)) - omap_bandgap_writel(bgp, rval->bg_mode_ctrl, - tsr->bgap_mode_ctrl); - if (OMAP_BANDGAP_HAS(bgp, TALERT)) { - omap_bandgap_writel(bgp, rval->bg_threshold, - tsr->bgap_threshold); - omap_bandgap_writel(bgp, rval->bg_ctrl, - tsr->bgap_mask_ctrl); + ti_bandgap_force_single_read(bgp, i); + + if (TI_BANDGAP_HAS(bgp, COUNTER)) + ti_bandgap_writel(bgp, rval->bg_counter, + tsr->bgap_counter); + if (TI_BANDGAP_HAS(bgp, MODE_CONFIG)) + ti_bandgap_writel(bgp, rval->bg_mode_ctrl, + tsr->bgap_mode_ctrl); + if (TI_BANDGAP_HAS(bgp, TALERT)) { + ti_bandgap_writel(bgp, rval->bg_threshold, + tsr->bgap_threshold); + ti_bandgap_writel(bgp, rval->bg_ctrl, + tsr->bgap_mask_ctrl); } } return 0; } -static int omap_bandgap_suspend(struct device *dev) +static int ti_bandgap_suspend(struct device *dev) { - struct omap_bandgap *bgp = dev_get_drvdata(dev); + struct ti_bandgap *bgp = dev_get_drvdata(dev); int err; - err = omap_bandgap_save_ctxt(bgp); - omap_bandgap_power(bgp, false); + err = ti_bandgap_save_ctxt(bgp); + ti_bandgap_power(bgp, false); - if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL)) + if (TI_BANDGAP_HAS(bgp, CLK_CTRL)) clk_disable_unprepare(bgp->fclock); return err; } -static int omap_bandgap_resume(struct device *dev) +static int ti_bandgap_resume(struct device *dev) { - struct omap_bandgap *bgp = dev_get_drvdata(dev); + struct ti_bandgap *bgp = dev_get_drvdata(dev); - if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL)) + if (TI_BANDGAP_HAS(bgp, CLK_CTRL)) clk_prepare_enable(bgp->fclock); - omap_bandgap_power(bgp, true); + ti_bandgap_power(bgp, true); - return omap_bandgap_restore_ctxt(bgp); + return ti_bandgap_restore_ctxt(bgp); } -static const struct dev_pm_ops omap_bandgap_dev_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(omap_bandgap_suspend, - omap_bandgap_resume) +static const struct dev_pm_ops ti_bandgap_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(ti_bandgap_suspend, + ti_bandgap_resume) }; -#define DEV_PM_OPS (&omap_bandgap_dev_pm_ops) +#define DEV_PM_OPS (&ti_bandgap_dev_pm_ops) #else #define DEV_PM_OPS NULL #endif -static const struct of_device_id of_omap_bandgap_match[] = { +static const struct of_device_id of_ti_bandgap_match[] = { #ifdef CONFIG_OMAP4_THERMAL { .compatible = "ti,omap4430-bandgap", @@ -1278,21 +1270,21 @@ static const struct of_device_id of_omap_bandgap_match[] = { /* Sentinel */ { }, }; -MODULE_DEVICE_TABLE(of, of_omap_bandgap_match); +MODULE_DEVICE_TABLE(of, of_ti_bandgap_match); -static struct platform_driver omap_bandgap_sensor_driver = { - .probe = omap_bandgap_probe, - .remove = omap_bandgap_remove, +static struct platform_driver ti_bandgap_sensor_driver = { + .probe = ti_bandgap_probe, + .remove = ti_bandgap_remove, .driver = { - .name = "omap-bandgap", + .name = "ti-soc-thermal", .pm = DEV_PM_OPS, - .of_match_table = of_omap_bandgap_match, + .of_match_table = of_ti_bandgap_match, }, }; -module_platform_driver(omap_bandgap_sensor_driver); +module_platform_driver(ti_bandgap_sensor_driver); MODULE_DESCRIPTION("OMAP4+ bandgap temperature sensor driver"); MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:omap-bandgap"); +MODULE_ALIAS("platform:ti-soc-thermal"); MODULE_AUTHOR("Texas Instrument Inc."); diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.h b/drivers/staging/ti-soc-thermal/ti-bandgap.h index ad83be8ce7e6..72c760f5cdb8 100644 --- a/drivers/staging/ti-soc-thermal/ti-bandgap.h +++ b/drivers/staging/ti-soc-thermal/ti-bandgap.h @@ -20,8 +20,8 @@ * 02110-1301 USA * */ -#ifndef __OMAP_BANDGAP_H -#define __OMAP_BANDGAP_H +#ifndef __TI_BANDGAP_H +#define __TI_BANDGAP_H #include #include @@ -30,22 +30,22 @@ /** * DOC: bandgap driver data structure * ================================== - * +---------------------+ +-----------------+ - * | struct omap_bandgap |-->| struct device * | - * +----------+----------+ +-----------------+ + * +-------------------+ +-----------------+ + * | struct ti_bandgap |-->| struct device * | + * +----------+--------+ +-----------------+ * | * | * V - * +--------------------------+ - * | struct omap_bandgap_data | - * +--------------------------+ + * +------------------------+ + * | struct ti_bandgap_data | + * +------------------------+ * | * | * * (Array of) * +------------+------------------------------------------------------+ - * | +----------+--------------+ +-------------------------+ | - * | | struct omap_temp_sensor |-->| struct temp_sensor_data | | - * | +-------------------------+ +------------+------------+ | + * | +----------+------------+ +-------------------------+ | + * | | struct ti_temp_sensor |-->| struct temp_sensor_data | | + * | +-----------------------+ +------------+------------+ | * | | | * | +--------------------------+ | * | V V | @@ -56,7 +56,7 @@ * +-------------------------------------------------------------------+ * * Above is a simple diagram describing how the data structure below - * are organized. For each bandgap device there should be a omap_bandgap_data + * are organized. For each bandgap device there should be a ti_bandgap_data * containing the device instance configuration, as well as, an array of * sensors, representing every sensor instance present in this bandgap. */ @@ -187,16 +187,16 @@ struct temp_sensor_data { u32 update_int2; /* not used */ }; -struct omap_bandgap_data; +struct ti_bandgap_data; /** - * struct omap_bandgap - bandgap device structure + * struct ti_bandgap - bandgap device structure * @dev: struct device pointer * @base: io memory base address * @conf: struct with bandgap configuration set (# sensors, conv_table, etc) * @fclock: pointer to functional clock of temperature sensor * @div_clk: pointer to divider clock of temperature sensor fclk - * @bg_mutex: mutex for omap_bandgap structure + * @bg_mutex: mutex for ti_bandgap structure * @irq: MPU IRQ number for thermal alert * @tshut_gpio: GPIO where Tshut signal is routed * @clk_rate: Holds current clock rate @@ -205,10 +205,10 @@ struct omap_bandgap_data; * It holds most of the dynamic stuff. Configurations and sensor specific * entries are inside the @conf structure. */ -struct omap_bandgap { +struct ti_bandgap { struct device *dev; void __iomem *base; - struct omap_bandgap_data *conf; + struct ti_bandgap_data *conf; struct clk *fclock; struct clk *div_clk; spinlock_t lock; /* shields this struct */ @@ -237,7 +237,7 @@ struct temp_sensor_regval { }; /** - * struct omap_temp_sensor - bandgap temperature sensor configuration data + * struct ti_temp_sensor - bandgap temperature sensor configuration data * @ts_data: pointer to struct with thresholds, limits of temperature sensor * @registers: pointer to the list of register offsets and bitfields * @regval: temperature sensor register values @@ -258,7 +258,7 @@ struct temp_sensor_regval { * assess the gradient from hotspot, how to cooldown the domain when sensor * reports too hot temperature. */ -struct omap_temp_sensor { +struct ti_temp_sensor { struct temp_sensor_data *ts_data; struct temp_sensor_registers *registers; struct temp_sensor_regval regval; @@ -269,56 +269,56 @@ struct omap_temp_sensor { const int slope_pcb; const int constant_pcb; void *data; - int (*register_cooling)(struct omap_bandgap *bgp, int id); - int (*unregister_cooling)(struct omap_bandgap *bgp, int id); + int (*register_cooling)(struct ti_bandgap *bgp, int id); + int (*unregister_cooling)(struct ti_bandgap *bgp, int id); }; /** * DOC: omap bandgap feature types * - * OMAP_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output + * TI_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output * of a bandgap device instance is routed to the processor. This means * the system must react and perform the shutdown by itself (handle an * IRQ, for instance). * - * OMAP_BANDGAP_FEATURE_TSHUT_CONFIG - used when the bandgap device has control + * TI_BANDGAP_FEATURE_TSHUT_CONFIG - used when the bandgap device has control * over the thermal shutdown configuration. This means that the thermal * shutdown thresholds are programmable, for instance. * - * OMAP_BANDGAP_FEATURE_TALERT - used when the bandgap device instance outputs + * TI_BANDGAP_FEATURE_TALERT - used when the bandgap device instance outputs * a signal representing violation of programmable alert thresholds. * - * OMAP_BANDGAP_FEATURE_MODE_CONFIG - used when it is possible to choose which + * TI_BANDGAP_FEATURE_MODE_CONFIG - used when it is possible to choose which * mode, continuous or one shot, the bandgap device instance will operate. * - * OMAP_BANDGAP_FEATURE_COUNTER - used when the bandgap device instance allows + * TI_BANDGAP_FEATURE_COUNTER - used when the bandgap device instance allows * programming the update interval of its internal state machine. * - * OMAP_BANDGAP_FEATURE_POWER_SWITCH - used when the bandgap device allows + * TI_BANDGAP_FEATURE_POWER_SWITCH - used when the bandgap device allows * itself to be switched on/off. * - * OMAP_BANDGAP_FEATURE_CLK_CTRL - used when the clocks feeding the bandgap + * TI_BANDGAP_FEATURE_CLK_CTRL - used when the clocks feeding the bandgap * device are gateable or not. * - * OMAP_BANDGAP_FEATURE_FREEZE_BIT - used when the bandgap device features + * TI_BANDGAP_FEATURE_FREEZE_BIT - used when the bandgap device features * a history buffer that its update can be freezed/unfreezed. * - * OMAP_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a + * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a * specific feature (above) or not. Return non-zero, if yes. */ -#define OMAP_BANDGAP_FEATURE_TSHUT BIT(0) -#define OMAP_BANDGAP_FEATURE_TSHUT_CONFIG BIT(1) -#define OMAP_BANDGAP_FEATURE_TALERT BIT(2) -#define OMAP_BANDGAP_FEATURE_MODE_CONFIG BIT(3) -#define OMAP_BANDGAP_FEATURE_COUNTER BIT(4) -#define OMAP_BANDGAP_FEATURE_POWER_SWITCH BIT(5) -#define OMAP_BANDGAP_FEATURE_CLK_CTRL BIT(6) -#define OMAP_BANDGAP_FEATURE_FREEZE_BIT BIT(7) -#define OMAP_BANDGAP_HAS(b, f) \ - ((b)->conf->features & OMAP_BANDGAP_FEATURE_ ## f) +#define TI_BANDGAP_FEATURE_TSHUT BIT(0) +#define TI_BANDGAP_FEATURE_TSHUT_CONFIG BIT(1) +#define TI_BANDGAP_FEATURE_TALERT BIT(2) +#define TI_BANDGAP_FEATURE_MODE_CONFIG BIT(3) +#define TI_BANDGAP_FEATURE_COUNTER BIT(4) +#define TI_BANDGAP_FEATURE_POWER_SWITCH BIT(5) +#define TI_BANDGAP_FEATURE_CLK_CTRL BIT(6) +#define TI_BANDGAP_FEATURE_FREEZE_BIT BIT(7) +#define TI_BANDGAP_HAS(b, f) \ + ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f) /** - * struct omap_bandgap_data - omap bandgap data configuration structure + * struct ti_bandgap_data - omap bandgap data configuration structure * @features: a bitwise flag set to describe the device features * @conv_table: Pointer to ADC to temperature conversion table * @adc_start_val: ADC conversion table starting value @@ -337,7 +337,7 @@ struct omap_temp_sensor { * their configuration representation, and how to export and unexport them to * a thermal API. */ -struct omap_bandgap_data { +struct ti_bandgap_data { unsigned int features; const int *conv_table; u32 adc_start_val; @@ -345,32 +345,31 @@ struct omap_bandgap_data { char *fclock_name; char *div_ck_name; int sensor_count; - int (*report_temperature)(struct omap_bandgap *bgp, int id); - int (*expose_sensor)(struct omap_bandgap *bgp, int id, char *domain); - int (*remove_sensor)(struct omap_bandgap *bgp, int id); + int (*report_temperature)(struct ti_bandgap *bgp, int id); + int (*expose_sensor)(struct ti_bandgap *bgp, int id, char *domain); + int (*remove_sensor)(struct ti_bandgap *bgp, int id); /* this needs to be at the end */ - struct omap_temp_sensor sensors[]; + struct ti_temp_sensor sensors[]; }; -int omap_bandgap_read_thot(struct omap_bandgap *bgp, int id, int *thot); -int omap_bandgap_write_thot(struct omap_bandgap *bgp, int id, int val); -int omap_bandgap_read_tcold(struct omap_bandgap *bgp, int id, int *tcold); -int omap_bandgap_write_tcold(struct omap_bandgap *bgp, int id, int val); -int omap_bandgap_read_update_interval(struct omap_bandgap *bgp, int id, - int *interval); -int omap_bandgap_write_update_interval(struct omap_bandgap *bgp, int id, - u32 interval); -int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id, +int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot); +int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val); +int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold); +int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val); +int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id, + int *interval); +int ti_bandgap_write_update_interval(struct ti_bandgap *bgp, int id, + u32 interval); +int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id, int *temperature); -int omap_bandgap_set_sensor_data(struct omap_bandgap *bgp, int id, - void *data); -void *omap_bandgap_get_sensor_data(struct omap_bandgap *bgp, int id); +int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data); +void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id); #ifdef CONFIG_OMAP4_THERMAL -extern const struct omap_bandgap_data omap4430_data; -extern const struct omap_bandgap_data omap4460_data; -extern const struct omap_bandgap_data omap4470_data; +extern const struct ti_bandgap_data omap4430_data; +extern const struct ti_bandgap_data omap4460_data; +extern const struct ti_bandgap_data omap4470_data; #else #define omap4430_data NULL #define omap4460_data NULL @@ -378,7 +377,7 @@ extern const struct omap_bandgap_data omap4470_data; #endif #ifdef CONFIG_OMAP5_THERMAL -extern const struct omap_bandgap_data omap5430_data; +extern const struct ti_bandgap_data omap5430_data; #else #define omap5430_data NULL #endif diff --git a/drivers/staging/ti-soc-thermal/ti-thermal-common.c b/drivers/staging/ti-soc-thermal/ti-thermal-common.c index feab2f4d6d5d..fb50e7ef6afb 100644 --- a/drivers/staging/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/staging/ti-soc-thermal/ti-thermal-common.c @@ -36,33 +36,33 @@ #include "ti-bandgap.h" /* common data structures */ -struct omap_thermal_data { - struct thermal_zone_device *omap_thermal; +struct ti_thermal_data { + struct thermal_zone_device *ti_thermal; struct thermal_cooling_device *cool_dev; - struct omap_bandgap *bgp; + struct ti_bandgap *bgp; enum thermal_device_mode mode; struct work_struct thermal_wq; int sensor_id; }; -static void omap_thermal_work(struct work_struct *work) +static void ti_thermal_work(struct work_struct *work) { - struct omap_thermal_data *data = container_of(work, - struct omap_thermal_data, thermal_wq); + struct ti_thermal_data *data = container_of(work, + struct ti_thermal_data, thermal_wq); - thermal_zone_device_update(data->omap_thermal); + thermal_zone_device_update(data->ti_thermal); - dev_dbg(&data->omap_thermal->device, "updated thermal zone %s\n", - data->omap_thermal->type); + dev_dbg(&data->ti_thermal->device, "updated thermal zone %s\n", + data->ti_thermal->type); } /** - * omap_thermal_hotspot_temperature - returns sensor extrapolated temperature + * ti_thermal_hotspot_temperature - returns sensor extrapolated temperature * @t: omap sensor temperature * @s: omap sensor slope value * @c: omap sensor const value */ -static inline int omap_thermal_hotspot_temperature(int t, int s, int c) +static inline int ti_thermal_hotspot_temperature(int t, int s, int c) { int delta = t * s / 1000 + c; @@ -74,12 +74,12 @@ static inline int omap_thermal_hotspot_temperature(int t, int s, int c) /* thermal zone ops */ /* Get temperature callback function for thermal zone*/ -static inline int omap_thermal_get_temp(struct thermal_zone_device *thermal, - unsigned long *temp) +static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) { - struct omap_thermal_data *data = thermal->devdata; - struct omap_bandgap *bgp; - struct omap_temp_sensor *s; + struct ti_thermal_data *data = thermal->devdata; + struct ti_bandgap *bgp; + struct ti_temp_sensor *s; int ret, tmp, pcb_temp, slope, constant; if (!data) @@ -88,7 +88,7 @@ static inline int omap_thermal_get_temp(struct thermal_zone_device *thermal, bgp = data->bgp; s = &bgp->conf->sensors[data->sensor_id]; - ret = omap_bandgap_read_temperature(bgp, data->sensor_id, &tmp); + ret = ti_bandgap_read_temperature(bgp, data->sensor_id, &tmp); if (ret) return ret; @@ -103,16 +103,16 @@ static inline int omap_thermal_get_temp(struct thermal_zone_device *thermal, slope = s->slope; constant = s->constant; } - *temp = omap_thermal_hotspot_temperature(tmp, slope, constant); + *temp = ti_thermal_hotspot_temperature(tmp, slope, constant); return ret; } /* Bind callback functions for thermal zone */ -static int omap_thermal_bind(struct thermal_zone_device *thermal, - struct thermal_cooling_device *cdev) +static int ti_thermal_bind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) { - struct omap_thermal_data *data = thermal->devdata; + struct ti_thermal_data *data = thermal->devdata; int id; if (IS_ERR_OR_NULL(data)) @@ -132,10 +132,10 @@ static int omap_thermal_bind(struct thermal_zone_device *thermal, } /* Unbind callback functions for thermal zone */ -static int omap_thermal_unbind(struct thermal_zone_device *thermal, - struct thermal_cooling_device *cdev) +static int ti_thermal_unbind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) { - struct omap_thermal_data *data = thermal->devdata; + struct ti_thermal_data *data = thermal->devdata; if (IS_ERR_OR_NULL(data)) return -ENODEV; @@ -149,10 +149,10 @@ static int omap_thermal_unbind(struct thermal_zone_device *thermal, } /* Get mode callback functions for thermal zone */ -static int omap_thermal_get_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode *mode) +static int ti_thermal_get_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode *mode) { - struct omap_thermal_data *data = thermal->devdata; + struct ti_thermal_data *data = thermal->devdata; if (data) *mode = data->mode; @@ -161,38 +161,38 @@ static int omap_thermal_get_mode(struct thermal_zone_device *thermal, } /* Set mode callback functions for thermal zone */ -static int omap_thermal_set_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode mode) +static int ti_thermal_set_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode mode) { - struct omap_thermal_data *data = thermal->devdata; + struct ti_thermal_data *data = thermal->devdata; - if (!data->omap_thermal) { + if (!data->ti_thermal) { dev_notice(&thermal->device, "thermal zone not registered\n"); return 0; } - mutex_lock(&data->omap_thermal->lock); + mutex_lock(&data->ti_thermal->lock); if (mode == THERMAL_DEVICE_ENABLED) - data->omap_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; + data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; else - data->omap_thermal->polling_delay = 0; + data->ti_thermal->polling_delay = 0; - mutex_unlock(&data->omap_thermal->lock); + mutex_unlock(&data->ti_thermal->lock); data->mode = mode; - thermal_zone_device_update(data->omap_thermal); + thermal_zone_device_update(data->ti_thermal); dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n", - data->omap_thermal->polling_delay); + data->ti_thermal->polling_delay); return 0; } /* Get trip type callback functions for thermal zone */ -static int omap_thermal_get_trip_type(struct thermal_zone_device *thermal, - int trip, enum thermal_trip_type *type) +static int ti_thermal_get_trip_type(struct thermal_zone_device *thermal, + int trip, enum thermal_trip_type *type) { - if (!omap_thermal_is_valid_trip(trip)) + if (!ti_thermal_is_valid_trip(trip)) return -EINVAL; if (trip + 1 == OMAP_TRIP_NUMBER) @@ -204,41 +204,41 @@ static int omap_thermal_get_trip_type(struct thermal_zone_device *thermal, } /* Get trip temperature callback functions for thermal zone */ -static int omap_thermal_get_trip_temp(struct thermal_zone_device *thermal, - int trip, unsigned long *temp) +static int ti_thermal_get_trip_temp(struct thermal_zone_device *thermal, + int trip, unsigned long *temp) { - if (!omap_thermal_is_valid_trip(trip)) + if (!ti_thermal_is_valid_trip(trip)) return -EINVAL; - *temp = omap_thermal_get_trip_value(trip); + *temp = ti_thermal_get_trip_value(trip); return 0; } /* Get critical temperature callback functions for thermal zone */ -static int omap_thermal_get_crit_temp(struct thermal_zone_device *thermal, - unsigned long *temp) +static int ti_thermal_get_crit_temp(struct thermal_zone_device *thermal, + unsigned long *temp) { /* shutdown zone */ - return omap_thermal_get_trip_temp(thermal, OMAP_TRIP_NUMBER - 1, temp); + return ti_thermal_get_trip_temp(thermal, OMAP_TRIP_NUMBER - 1, temp); } -static struct thermal_zone_device_ops omap_thermal_ops = { - .get_temp = omap_thermal_get_temp, +static struct thermal_zone_device_ops ti_thermal_ops = { + .get_temp = ti_thermal_get_temp, /* TODO: add .get_trend */ - .bind = omap_thermal_bind, - .unbind = omap_thermal_unbind, - .get_mode = omap_thermal_get_mode, - .set_mode = omap_thermal_set_mode, - .get_trip_type = omap_thermal_get_trip_type, - .get_trip_temp = omap_thermal_get_trip_temp, - .get_crit_temp = omap_thermal_get_crit_temp, + .bind = ti_thermal_bind, + .unbind = ti_thermal_unbind, + .get_mode = ti_thermal_get_mode, + .set_mode = ti_thermal_set_mode, + .get_trip_type = ti_thermal_get_trip_type, + .get_trip_temp = ti_thermal_get_trip_temp, + .get_crit_temp = ti_thermal_get_crit_temp, }; -static struct omap_thermal_data -*omap_thermal_build_data(struct omap_bandgap *bgp, int id) +static struct ti_thermal_data +*ti_thermal_build_data(struct ti_bandgap *bgp, int id) { - struct omap_thermal_data *data; + struct ti_thermal_data *data; data = devm_kzalloc(bgp->dev, sizeof(*data), GFP_KERNEL); if (!data) { @@ -248,69 +248,69 @@ static struct omap_thermal_data data->sensor_id = id; data->bgp = bgp; data->mode = THERMAL_DEVICE_ENABLED; - INIT_WORK(&data->thermal_wq, omap_thermal_work); + INIT_WORK(&data->thermal_wq, ti_thermal_work); return data; } -int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id, - char *domain) +int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, + char *domain) { - struct omap_thermal_data *data; + struct ti_thermal_data *data; - data = omap_bandgap_get_sensor_data(bgp, id); + data = ti_bandgap_get_sensor_data(bgp, id); if (IS_ERR_OR_NULL(data)) - data = omap_thermal_build_data(bgp, id); + data = ti_thermal_build_data(bgp, id); if (!data) return -EINVAL; /* TODO: remove TC1 TC2 */ /* Create thermal zone */ - data->omap_thermal = thermal_zone_device_register(domain, - OMAP_TRIP_NUMBER, 0, data, &omap_thermal_ops, + data->ti_thermal = thermal_zone_device_register(domain, + OMAP_TRIP_NUMBER, 0, data, &ti_thermal_ops, NULL, FAST_TEMP_MONITORING_RATE, FAST_TEMP_MONITORING_RATE); - if (IS_ERR_OR_NULL(data->omap_thermal)) { + if (IS_ERR_OR_NULL(data->ti_thermal)) { dev_err(bgp->dev, "thermal zone device is NULL\n"); - return PTR_ERR(data->omap_thermal); + return PTR_ERR(data->ti_thermal); } - data->omap_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; - omap_bandgap_set_sensor_data(bgp, id, data); + data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; + ti_bandgap_set_sensor_data(bgp, id, data); return 0; } -int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id) +int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id) { - struct omap_thermal_data *data; + struct ti_thermal_data *data; - data = omap_bandgap_get_sensor_data(bgp, id); + data = ti_bandgap_get_sensor_data(bgp, id); - thermal_zone_device_unregister(data->omap_thermal); + thermal_zone_device_unregister(data->ti_thermal); return 0; } -int omap_thermal_report_sensor_temperature(struct omap_bandgap *bgp, int id) +int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id) { - struct omap_thermal_data *data; + struct ti_thermal_data *data; - data = omap_bandgap_get_sensor_data(bgp, id); + data = ti_bandgap_get_sensor_data(bgp, id); schedule_work(&data->thermal_wq); return 0; } -int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id) +int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id) { - struct omap_thermal_data *data; + struct ti_thermal_data *data; - data = omap_bandgap_get_sensor_data(bgp, id); + data = ti_bandgap_get_sensor_data(bgp, id); if (IS_ERR_OR_NULL(data)) - data = omap_thermal_build_data(bgp, id); + data = ti_thermal_build_data(bgp, id); if (!data) return -EINVAL; @@ -322,16 +322,16 @@ int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id) "Failed to register cpufreq cooling device\n"); return PTR_ERR(data->cool_dev); } - omap_bandgap_set_sensor_data(bgp, id, data); + ti_bandgap_set_sensor_data(bgp, id, data); return 0; } -int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id) +int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id) { - struct omap_thermal_data *data; + struct ti_thermal_data *data; - data = omap_bandgap_get_sensor_data(bgp, id); + data = ti_bandgap_get_sensor_data(bgp, id); cpufreq_cooling_unregister(data->cool_dev); return 0; diff --git a/drivers/staging/ti-soc-thermal/ti-thermal.h b/drivers/staging/ti-soc-thermal/ti-thermal.h index 3ed4adb765e2..ef6981c9436a 100644 --- a/drivers/staging/ti-soc-thermal/ti-thermal.h +++ b/drivers/staging/ti-soc-thermal/ti-thermal.h @@ -60,47 +60,45 @@ /* helper macros */ /** - * omap_thermal_get_trip_value - returns trip temperature based on index + * ti_thermal_get_trip_value - returns trip temperature based on index * @i: trip index */ -#define omap_thermal_get_trip_value(i) \ +#define ti_thermal_get_trip_value(i) \ (OMAP_TRIP_HOT + ((i) * OMAP_TRIP_STEP)) /** - * omap_thermal_is_valid_trip - check for trip index + * ti_thermal_is_valid_trip - check for trip index * @i: trip index */ -#define omap_thermal_is_valid_trip(trip) \ +#define ti_thermal_is_valid_trip(trip) \ ((trip) >= 0 && (trip) < OMAP_TRIP_NUMBER) #ifdef CONFIG_TI_THERMAL -int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id, - char *domain); -int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id); -int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id); -int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id); +int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, char *domain); +int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id); +int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id); +int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id); #else static inline -int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id, - char *domain) +int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, char *domain) { return 0; } static inline -int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id) +int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id) { return 0; } static inline -int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id) +int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id) { return 0; } static inline -int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id) +int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id) { return 0; } -- 2.30.2