From 037b3af6bf84a404a8c6dbe0a7dd551f1b95b530 Mon Sep 17 00:00:00 2001 From: Florian Vaussard Date: Tue, 29 Nov 2016 17:38:58 -0800 Subject: [PATCH] Input: drv2665 - fix misuse of regmap_update_bits Using regmap_update_bits(..., mask, 1) with 'mask' following (1 << k) and k greater than 0 is wrong. Indeed, _regmap_update_bits will perform (mask & 1), which results in 0 if LSB of mask is 0. Thus the call regmap_update_bits(..., mask, 1) is in reality equivalent to regmap_update_bits(..., mask, 0). In such a case, the correct use is regmap_update_bits(..., mask, mask). This driver is performing such a mistake with the DRV2665_STANDBY mask, which equals BIT(6). Fix the driver to make it consistent with the API, and fix the alignment problem at the same time. Please note that this change is untested, as I do not have this piece of hardware. Testers are welcome! Signed-off-by: Florian Vaussard Signed-off-by: Dmitry Torokhov --- drivers/input/misc/drv2665.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/input/misc/drv2665.c b/drivers/input/misc/drv2665.c index ef9bc12b3be3..dcb6d8e94b11 100644 --- a/drivers/input/misc/drv2665.c +++ b/drivers/input/misc/drv2665.c @@ -125,8 +125,8 @@ static void drv2665_close(struct input_dev *input) cancel_work_sync(&haptics->work); - error = regmap_update_bits(haptics->regmap, - DRV2665_CTRL_2, DRV2665_STANDBY, 1); + error = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2, + DRV2665_STANDBY, DRV2665_STANDBY); if (error) dev_err(&haptics->client->dev, "Failed to enter standby mode: %d\n", error); @@ -240,7 +240,7 @@ static int __maybe_unused drv2665_suspend(struct device *dev) if (haptics->input_dev->users) { ret = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2, - DRV2665_STANDBY, 1); + DRV2665_STANDBY, DRV2665_STANDBY); if (ret) { dev_err(dev, "Failed to set standby mode\n"); regulator_disable(haptics->regulator); -- 2.30.2