From 02f037d641dc6672be5cfe7875a48ab99b95b154 Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Wed, 23 Mar 2016 15:41:57 -0600 Subject: [PATCH] x86/mm/pat: Add support of non-default PAT MSR setting In preparation for fixing a regression caused by: 9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled")' ... PAT needs to support a case that PAT MSR is initialized with a non-default value. When pat_init() is called and PAT is disabled, it initializes the PAT table with the BIOS default value. Xen, however, sets PAT MSR with a non-default value to enable WC. This causes inconsistency between the PAT table and PAT MSR when PAT is set to disable on Xen. Change pat_init() to handle the PAT disable cases properly. Add init_cache_modes() to handle two cases when PAT is set to disable. 1. CPU supports PAT: Set PAT table to be consistent with PAT MSR. 2. CPU does not support PAT: Set PAT table to be consistent with PWT and PCD bits in a PTE. Note, __init_cache_modes(), renamed from pat_init_cache_modes(), will be changed to a static function in a later patch. Signed-off-by: Toshi Kani Reviewed-by: Thomas Gleixner Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Juergen Gross Cc: Linus Torvalds Cc: Luis R. Rodriguez Cc: Peter Zijlstra Cc: Toshi Kani Cc: elliott@hpe.com Cc: konrad.wilk@oracle.com Cc: paul.gortmaker@windriver.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1458769323-24491-2-git-send-email-toshi.kani@hpe.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/pat.h | 2 +- arch/x86/mm/pat.c | 73 +++++++++++++++++++++++++++----------- arch/x86/xen/enlighten.c | 2 +- 3 files changed, 55 insertions(+), 22 deletions(-) diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h index ca6c228d5e62..97ea55bc2b54 100644 --- a/arch/x86/include/asm/pat.h +++ b/arch/x86/include/asm/pat.h @@ -6,7 +6,7 @@ bool pat_enabled(void); extern void pat_init(void); -void pat_init_cache_modes(u64); +void __init_cache_modes(u64); extern int reserve_memtype(u64 start, u64 end, enum page_cache_mode req_pcm, enum page_cache_mode *ret_pcm); diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index faec01e7a17d..b4663885308f 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -181,7 +181,7 @@ static enum page_cache_mode pat_get_cache_mode(unsigned pat_val, char *msg) * configuration. * Using lower indices is preferred, so we start with highest index. */ -void pat_init_cache_modes(u64 pat) +void __init_cache_modes(u64 pat) { enum page_cache_mode cache; char pat_msg[33]; @@ -207,9 +207,6 @@ static void pat_bsp_init(u64 pat) return; } - if (!pat_enabled()) - goto done; - rdmsrl(MSR_IA32_CR_PAT, tmp_pat); if (!tmp_pat) { pat_disable("PAT MSR is 0, disabled."); @@ -218,15 +215,11 @@ static void pat_bsp_init(u64 pat) wrmsrl(MSR_IA32_CR_PAT, pat); -done: - pat_init_cache_modes(pat); + __init_cache_modes(pat); } static void pat_ap_init(u64 pat) { - if (!pat_enabled()) - return; - if (!cpu_has_pat) { /* * If this happens we are on a secondary CPU, but switched to @@ -238,18 +231,32 @@ static void pat_ap_init(u64 pat) wrmsrl(MSR_IA32_CR_PAT, pat); } -void pat_init(void) +static void init_cache_modes(void) { - u64 pat; - struct cpuinfo_x86 *c = &boot_cpu_data; + u64 pat = 0; + static int init_cm_done; - if (!pat_enabled()) { + if (init_cm_done) + return; + + if (boot_cpu_has(X86_FEATURE_PAT)) { + /* + * CPU supports PAT. Set PAT table to be consistent with + * PAT MSR. This case supports "nopat" boot option, and + * virtual machine environments which support PAT without + * MTRRs. In specific, Xen has unique setup to PAT MSR. + * + * If PAT MSR returns 0, it is considered invalid and emulates + * as No PAT. + */ + rdmsrl(MSR_IA32_CR_PAT, pat); + } + + if (!pat) { /* * No PAT. Emulate the PAT table that corresponds to the two - * cache bits, PWT (Write Through) and PCD (Cache Disable). This - * setup is the same as the BIOS default setup when the system - * has PAT but the "nopat" boot option has been specified. This - * emulated PAT table is used when MSR_IA32_CR_PAT returns 0. + * cache bits, PWT (Write Through) and PCD (Cache Disable). + * This setup is also the same as the BIOS default setup. * * PTE encoding: * @@ -266,10 +273,36 @@ void pat_init(void) */ pat = PAT(0, WB) | PAT(1, WT) | PAT(2, UC_MINUS) | PAT(3, UC) | PAT(4, WB) | PAT(5, WT) | PAT(6, UC_MINUS) | PAT(7, UC); + } + + __init_cache_modes(pat); + + init_cm_done = 1; +} + +/** + * pat_init - Initialize PAT MSR and PAT table + * + * This function initializes PAT MSR and PAT table with an OS-defined value + * to enable additional cache attributes, WC and WT. + * + * This function must be called on all CPUs using the specific sequence of + * operations defined in Intel SDM. mtrr_rendezvous_handler() provides this + * procedure for PAT. + */ +void pat_init(void) +{ + u64 pat; + struct cpuinfo_x86 *c = &boot_cpu_data; + + if (!pat_enabled()) { + init_cache_modes(); + return; + } - } else if ((c->x86_vendor == X86_VENDOR_INTEL) && - (((c->x86 == 0x6) && (c->x86_model <= 0xd)) || - ((c->x86 == 0xf) && (c->x86_model <= 0x6)))) { + if ((c->x86_vendor == X86_VENDOR_INTEL) && + (((c->x86 == 0x6) && (c->x86_model <= 0xd)) || + ((c->x86 == 0xf) && (c->x86_model <= 0x6)))) { /* * PAT support with the lower four entries. Intel Pentium 2, * 3, M, and 4 are affected by PAT errata, which makes the diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 880862c7d9dd..c469a7c7c309 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1623,7 +1623,7 @@ asmlinkage __visible void __init xen_start_kernel(void) * configuration. */ rdmsrl(MSR_IA32_CR_PAT, pat); - pat_init_cache_modes(pat); + __init_cache_modes(pat); /* keep using Xen gdt for now; no urgent need to change it */ -- 2.30.2