From 02250367ff78b4038927330c92cc94667800c7a9 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Thu, 7 Jun 2018 17:36:57 +0200 Subject: [PATCH] ipq40xx: fix OpenMesh A62 dtc warnings Warning (pci_bridge): Node /soc/pci@40000000/pcie@0 missing ranges for PCI bridge (or not a bridge) Warning (pci_bridge): Node /soc/pci@40000000/pcie@0 missing bus-range for PCI bridge Warning (pci_bridge): Node /soc/pci@40000000/pcie@0/ath10k@0,0 node name is not "pci" or "pcie" Warning (pci_bridge): Node /soc/pci@40000000/pcie@0/ath10k@0,0 missing ranges for PCI bridge (or not a bridge) Warning (pci_bridge): Node /soc/pci@40000000/pcie@0/ath10k@0,0 incorrect #address-cells for PCI bridge Warning (pci_bridge): Node /soc/pci@40000000/pcie@0/ath10k@0,0 incorrect #size-cells for PCI bridge Warning (pci_bridge): Node /soc/pci@40000000/pcie@0/ath10k@0,0 missing bus-range for PCI bridge Warning (unit_address_format): Failed prerequisite 'pci_bridge' Warning (pci_device_reg): Failed prerequisite 'pci_bridge' Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' Cc: Sven Eckelmann Signed-off-by: Christian Lamparter Tested-by: Sven Eckelmann (backported from 146fbeb81cc6eae1bba63a708b5a28071acc874e) --- .../arch/arm/boot/dts/qcom-ipq4019-a62.dts | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts index dd6d6bd775..b69e142d6f 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts @@ -212,18 +212,16 @@ perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; #address-cells = <3>; - device_type = "pci"; + #size-cells = <2>; + ranges; - ath10k@0,0 { + wifi2: wifi@0,0 { compatible = "qcom,ath10k"; status = "okay"; - reg = <0 0 0 0 0>; - device_type = "pci"; + reg = <0x00010000 0 0 0 0>; qcom,ath10k-calibration-variant = "OM-A62"; }; }; -- 2.30.2