From 01e73c89cf03c020e586dc9e30d52a6e098853f6 Mon Sep 17 00:00:00 2001 From: Rhyland Klein Date: Mon, 9 Dec 2013 12:36:09 +0100 Subject: [PATCH] mfd: cros ec: spi: Add delay for raising CS The EC has specific timing it requires. Add support for an optional delay after raising CS to fix timing issues. This is configurable based on a DT property "google,cros-ec-spi-msg-delay". If this property isn't set, then no delay will be added. However, if set it will cause a delay equal to the value passed to it to be inserted at the end of a transaction. Signed-off-by: Rhyland Klein Reviewed-by: Bernie Thompson Reviewed-by: Andrew Bresticker Acked-by: Mark Rutland Signed-off-by: Thierry Reding Signed-off-by: Lee Jones --- .../devicetree/bindings/mfd/cros-ec.txt | 9 ++++++ drivers/mfd/cros_ec_spi.c | 29 +++++++++++++++++++ 2 files changed, 38 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt index 5f229c5f6da9..8009c3d87f33 100644 --- a/Documentation/devicetree/bindings/mfd/cros-ec.txt +++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt @@ -17,6 +17,15 @@ Required properties (SPI): - compatible: "google,cros-ec-spi" - reg: SPI chip select +Optional properties (SPI): +- google,cros-ec-spi-msg-delay: Some implementations of the EC require some + additional processing time in order to accept new transactions. If the delay + between transactions is not long enough the EC may not be able to respond + properly to subsequent transactions and cause them to hang. This property + specifies the delay, in usecs, introduced between transactions to account + for the time required by the EC to get back into a state in which new data + can be accepted. + Required properties (LPC): - compatible: "google,cros-ec-lpc" - reg: List of (IO address, size) pairs defining the interface uses diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c index 005403643539..84af8d7a4295 100644 --- a/drivers/mfd/cros_ec_spi.c +++ b/drivers/mfd/cros_ec_spi.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -62,10 +63,13 @@ * @spi: SPI device we are connected to * @last_transfer_ns: time that we last finished a transfer, or 0 if there * if no record + * @end_of_msg_delay: used to set the delay_usecs on the spi_transfer that + * is sent when we want to turn off CS at the end of a transaction. */ struct cros_ec_spi { struct spi_device *spi; s64 last_transfer_ns; + unsigned int end_of_msg_delay; }; static void debug_packet(struct device *dev, const char *name, u8 *ptr, @@ -238,6 +242,17 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev, /* turn off CS */ spi_message_init(&msg); + + if (ec_spi->end_of_msg_delay) { + /* + * Add delay for last transaction, to ensure the rising edge + * doesn't come too soon after the end of the data. + */ + memset(&trans, 0, sizeof(trans)); + trans.delay_usecs = ec_spi->end_of_msg_delay; + spi_message_add_tail(&trans, &msg); + } + final_ret = spi_sync(ec_spi->spi, &msg); ktime_get_ts(&ts); ec_spi->last_transfer_ns = timespec_to_ns(&ts); @@ -284,6 +299,17 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev, return 0; } +static void cros_ec_spi_dt_probe(struct cros_ec_spi *ec_spi, struct device *dev) +{ + struct device_node *np = dev->of_node; + u32 val; + int ret; + + ret = of_property_read_u32(np, "google,cros-ec-spi-msg-delay", &val); + if (!ret) + ec_spi->end_of_msg_delay = val; +} + static int cros_ec_spi_probe(struct spi_device *spi) { struct device *dev = &spi->dev; @@ -305,6 +331,9 @@ static int cros_ec_spi_probe(struct spi_device *spi) if (!ec_dev) return -ENOMEM; + /* Check for any DT properties */ + cros_ec_spi_dt_probe(ec_spi, dev); + spi_set_drvdata(spi, ec_dev); ec_dev->name = "SPI"; ec_dev->dev = dev; -- 2.30.2