From 011f5c13f8b6734b0e34b016842a8b93b6902d30 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Mon, 3 Nov 2014 11:32:25 +0200 Subject: [PATCH] omap3: cm-t3517: add USB support Add both host and mUSB support. Currently, the selection between host USB and mUSB is done through the config file. Signed-off-by: Igor Grinberg Reviewed-by: Tom Rini --- board/compulab/cm_t3517/cm_t3517.c | 82 ++++++++++++++++++++++++++++++ board/compulab/cm_t3517/mux.c | 38 ++++++++++++++ include/configs/cm_t3517.h | 17 +++++++ 3 files changed, 137 insertions(+) diff --git a/board/compulab/cm_t3517/cm_t3517.c b/board/compulab/cm_t3517/cm_t3517.c index 056fc1581d..6abecc20af 100644 --- a/board/compulab/cm_t3517/cm_t3517.c +++ b/board/compulab/cm_t3517/cm_t3517.c @@ -8,14 +8,19 @@ #include #include +#include #include #include +#include #include #include #include #include #include +#include +#include +#include #include "../common/common.h" @@ -27,6 +32,53 @@ const omap3_sysinfo sysinfo = { "NAND 128/512M", }; +#ifdef CONFIG_USB_MUSB_AM35X +static struct musb_hdrc_config cm_t3517_musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 16, + .ram_bits = 12, +}; + +static struct omap_musb_board_data cm_t3517_musb_board_data = { + .set_phy_power = am35x_musb_phy_power, + .clear_irq = am35x_musb_clear_irq, + .reset = am35x_musb_reset, +}; + +static struct musb_hdrc_platform_data cm_t3517_musb_pdata = { +#if defined(CONFIG_MUSB_HOST) + .mode = MUSB_HOST, +#elif defined(CONFIG_MUSB_GADGET) + .mode = MUSB_PERIPHERAL, +#else +#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET" +#endif + .config = &cm_t3517_musb_config, + .power = 250, + .platform_ops = &am35x_ops, + .board_data = &cm_t3517_musb_board_data, +}; + +static void cm_t3517_musb_init(void) +{ + /* + * Set up USB clock/mode in the DEVCONF2 register. + * USB2.0 PHY reference clock is 13 MHz + */ + clrsetbits_le32(&am35x_scm_general_regs->devconf2, + CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE, + CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | + CONF2_VBDTCTEN | CONF2_DATPOL); + + if (musb_register(&cm_t3517_musb_pdata, &cm_t3517_musb_board_data, + (void *)AM35XX_IPSS_USBOTGSS_BASE)) + printf("Failed initializing AM35x MUSB!\n"); +} +#else +static inline void am3517_evm_musb_init(void) {} +#endif + int board_init(void) { gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ @@ -38,6 +90,8 @@ int board_init(void) status_led_set(STATUS_LED_BOOT, STATUS_LED_ON); #endif + cm_t3517_musb_init(); + return 0; } @@ -58,3 +112,31 @@ int board_mmc_init(bd_t *bis) return omap_mmc_init(0, 0, 0, SB_T35_CD_GPIO, SB_T35_WP_GPIO); } #endif + +#ifdef CONFIG_USB_EHCI_OMAP +static struct omap_usbhs_board_data cm_t3517_usbhs_bdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, +}; + +#define CM_T3517_USB_HUB_RESET_GPIO 152 +#define SB_T35_USB_HUB_RESET_GPIO 98 + +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + cl_usb_hub_init(CM_T3517_USB_HUB_RESET_GPIO, "cm-t3517 hub rst"); + cl_usb_hub_init(SB_T35_USB_HUB_RESET_GPIO, "sb-t35 hub rst"); + + return omap_ehci_hcd_init(index, &cm_t3517_usbhs_bdata, hccr, hcor); +} + +int ehci_hcd_stop(void) +{ + cl_usb_hub_deinit(CM_T3517_USB_HUB_RESET_GPIO); + cl_usb_hub_deinit(SB_T35_USB_HUB_RESET_GPIO); + + return omap_ehci_hcd_stop(); +} +#endif /* CONFIG_USB_EHCI_OMAP */ diff --git a/board/compulab/cm_t3517/mux.c b/board/compulab/cm_t3517/mux.c index f799d211c4..e1575a61bd 100644 --- a/board/compulab/cm_t3517/mux.c +++ b/board/compulab/cm_t3517/mux.c @@ -104,6 +104,10 @@ void set_muxconf_regs(void) MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M4)); /*GPIO_144*/ /* WIFI nRESET GPIO145 */ MUX_VAL(CP(UART2_RTS), (IEN | PTD | EN | M4)); /*GPIO_145*/ + /* USB1 PHY Reset GPIO 146 */ + MUX_VAL(CP(UART2_TX), (IEN | PTD | EN | M4)); /*GPIO_146*/ + /* USB2 PHY Reset GPIO 147 */ + MUX_VAL(CP(UART2_RX), (IEN | PTD | EN | M4)); /*GPIO_147*/ /* MMC1 */ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)); @@ -119,12 +123,46 @@ void set_muxconf_regs(void) MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)); MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)); + /* SB-T35 USB HUB Reset GPIO98 */ + MUX_VAL(CP(CCDC_WEN), (IDIS | PTU | EN | M4)); /*GPIO_98*/ + /* CM-T3517 USB HUB Reset GPIO152 */ + MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)); /*GPIO_152*/ + /* Green LED GPIO186 */ MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | DIS | M4)); /*GPIO_186*/ /* RTC V3020 CS Enable GPIO160 */ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTD | EN | M4)); /*GPIO_160*/ + /* USB0 - mUSB */ + MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)); + /* USB1 EHCI */ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT0*/ + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT1*/ + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT2*/ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT3*/ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT4*/ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT5*/ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT6*/ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT7*/ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DIR*/ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_NXT*/ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB1_CLK*/ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB1_STP*/ + /* USB2 EHCI */ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT0*/ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT1*/ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M3)); /*HSUSB2_DT2*/ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M3)); /*HSUSB2_DT3*/ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | EN | M3)); /*HSUSB2_DT4*/ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | EN | M3)); /*HSUSB2_DT5*/ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M3)); /*HSUSB2_DT6*/ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | EN | M3)); /*HSUSB2_DT7*/ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DIR*/ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_NXT*/ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB2_CLK*/ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB2_STP*/ + /* SYS_BOOT */ MUX_VAL(CP(SYS_BOOT0), (IEN | PTU | DIS | M4)); /*GPIO_2*/ MUX_VAL(CP(SYS_BOOT1), (IEN | PTU | DIS | M4)); /*GPIO_3*/ diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h index d691b9fa50..046649db97 100644 --- a/include/configs/cm_t3517.h +++ b/include/configs/cm_t3517.h @@ -98,6 +98,23 @@ #define CONFIG_OMAP_HSMMC #define CONFIG_DOS_PARTITION +/* USB */ +#define CONFIG_USB_MUSB_AM35X + +#ifndef CONFIG_USB_MUSB_AM35X +#define CONFIG_USB_OMAP3 +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_OMAP +#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146 +#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147 +#else /* !CONFIG_USB_MUSB_AM35X */ +#define CONFIG_MUSB_HOST +#define CONFIG_MUSB_PIO_ONLY +#endif /* CONFIG_USB_MUSB_AM35X */ + +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_USB + /* commands to include */ #include -- 2.30.2