From 009e62c92c35142c5be3b375d6c393e63d2d27eb Mon Sep 17 00:00:00 2001 From: =?utf8?q?Richard=20Fr=C3=B6hning?= Date: Sun, 2 Aug 2020 16:22:50 +0200 Subject: [PATCH] ramips: add support for TP-Link RE200 v3 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit TP-Link RE200 v3 is a wireless range extender with Ethernet and 2.4G and 5G WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN like the v2. Specifications -------------- - MediaTek MT7628AN (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 1x 10/100 Mbps Ethernet - 8x LED (GPIO-controlled), 2x button Unverified: - UART header on PCB (57600 8n1) There are 2.4G and 5G LEDs in red and green which are controlled separately. MAC addresses ------------- MAC address assignment has been done according to the RE200 v2. The label MAC address matches the OpenWrt ethernet address. Installation ------------ Web Interface ------------- It is possible to upgrade to OpenWrt via the web interface. Simply flash the -factory.bin from OEM. In contrast to a stock firmware, this will not overwrite U-Boot. Recovery -------- Unfortunately, this devices does not offer a recovery mode or a tftp installation method. If the web interface upgrade fails, you have to open your device and attach serial console. The device has not been opened for adding support. However, it is expected that the behavior is similar to the RE200 v2. Instructions for serial console and recovery may be checked out in commit 6d6f36ae787c ("ramips: add support for TP-Link RE200 v2") or on the device's Wiki page. Signed-off-by: Richard Fröhning [adjust commit title/message, sort support list] Signed-off-by: Adrian Schmutzler --- .../ramips/dts/mt7628an_tplink_re200-v3.dts | 70 +++++++++++++++++++ target/linux/ramips/image/mt76x8.mk | 10 +++ .../mt76x8/base-files/etc/board.d/01_leds | 1 + .../mt76x8/base-files/etc/board.d/02_network | 1 + tools/firmware-utils/src/tplink-safeloader.c | 44 ++++++++++++ 5 files changed, 126 insertions(+) create mode 100644 target/linux/ramips/dts/mt7628an_tplink_re200-v3.dts diff --git a/target/linux/ramips/dts/mt7628an_tplink_re200-v3.dts b/target/linux/ramips/dts/mt7628an_tplink_re200-v3.dts new file mode 100644 index 000000000000..21d256498e34 --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_tplink_re200-v3.dts @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7628an_tplink_re200.dtsi" + +/ { + compatible = "tplink,re200-v3", "mediatek,mt7628an-soc"; + model = "TP-Link RE200 v3"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + wps { + label = "re200-v3:green:wps"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "re200-v3:green:wifi"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "re200-v3:green:lan"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "re200-v3:green:power"; + gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + + wifi2g_green { + label = "re200-v3:green:wifi2g"; + gpios = <&gpio 41 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wifi5g_green { + label = "re200-v3:green:wifi5g"; + gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wifi2g_red { + label = "re200-v3:red:wifi2g"; + gpios = <&gpio 43 GPIO_ACTIVE_LOW>; + }; + + wifi5g_red { + label = "re200-v3:red:wifi5g"; + gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&state_default { + gpio { + groups = "p4led_an", "p3led_an", "p2led_an", "p1led_an", + "p0led_an", "wled_an", "i2c", "wdt", "refclk"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 9ec469d32df5..d170eaa065a0 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -404,6 +404,16 @@ define Device/tplink_re200-v2 endef TARGET_DEVICES += tplink_re200-v2 +define Device/tplink_re200-v3 + $(Device/tplink-safeloader) + IMAGE_SIZE := 7808k + DEVICE_MODEL := RE200 + DEVICE_VARIANT := v3 + DEVICE_PACKAGES := kmod-mt76x0e + TPLINK_BOARD_ID := RE200-V3 +endef +TARGET_DEVICES += tplink_re200-v3 + define Device/tplink_re220-v2 $(Device/tplink-safeloader) IMAGE_SIZE := 7808k diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index 1e478df4efa1..94c5cb5d49ca 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -69,6 +69,7 @@ tplink,archer-c50-v4) ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt" ;; tplink,re200-v2|\ +tplink,re200-v3|\ tplink,re220-v2|\ tplink,tl-mr3020-v3|\ tplink,tl-wa801nd-v5) diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index cf7e88ebf1b7..83437ea3646a 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -19,6 +19,7 @@ ramips_setup_interfaces() ravpower,rp-wd009|\ tama,w06|\ tplink,re200-v2|\ + tplink,re200-v3|\ tplink,re220-v2|\ tplink,re305-v1|\ tplink,tl-mr3020-v3|\ diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 3f83f19d2de7..a5f3ced16d87 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -1562,6 +1562,50 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "file-system" }, + /** Firmware layout for the RE200 v3 */ + { + .id = "RE200-V3", + .vendor = "", + .support_list = + "SupportList:\n" + "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n", + .support_trail = '\x00', + .soft_ver = NULL, + + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, + {"firmware", 0x20000, 0x7a0000}, + {"partition-table", 0x7c0000, 0x02000}, + {"default-mac", 0x7c2000, 0x00020}, + {"pin", 0x7c2100, 0x00020}, + {"product-info", 0x7c3100, 0x01000}, + {"soft-version", 0x7c4200, 0x01000}, + {"support-list", 0x7c5200, 0x01000}, + {"profile", 0x7c6200, 0x08000}, + {"config-info", 0x7ce200, 0x00400}, + {"user-config", 0x7d0000, 0x10000}, + {"default-config", 0x7e0000, 0x10000}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system" + }, + /** Firmware layout for the RE220 v2 */ { .id = "RE220-V2", -- 2.30.2