ramips: add support for Netgear EAX12 series
authorWenli Looi <wlooi@ucalgary.ca>
Thu, 30 Mar 2023 22:28:23 +0000 (22:28 +0000)
committerHauke Mehrtens <hauke@hauke-m.de>
Sat, 1 Jul 2023 12:42:11 +0000 (14:42 +0200)
commit32ea8a9a7e4b1319607ae398e9bf7d8e3c4cd756
tree2c1b5c54d2575389fba07e0c185b7299004a8751
parent0a1ebccc8702cadc50bc096f1e185472f3927786
ramips: add support for Netgear EAX12 series

Netgear EAX12, EAX11v2, EAX15v2 are wall-plug 802.11ax (Wi-Fi 6)
extenders that share the SoC, WiFi chip, and image format with the
WAX202.

Specifications:
* MT7621, 256 MiB RAM, 128 MiB NAND
* MT7915: 2.4/5 GHz 2x2 802.11ax (DBDC)
* Ethernet: 1 port 10/100/1000
* UART: 115200 baud (labeled on board)

All LEDs and buttons appear to work without state_default.

Installation:
* Flash the factory image through the stock web interface, or TFTP to
  the bootloader. NMRP can be used to TFTP without opening the case.

Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.

References in GPL source:
https://www.downloads.netgear.com/files/GPL/EAX12_EAX11v2_EAX15v2_GPL_V1.0.3.34_src.tar.gz

* target/linux/ramips/dts/mt7621-rfb-ax-nand.dts
  DTS file for this device.

Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
package/boot/uboot-envtools/files/ramips
target/linux/ramips/dts/mt7621_netgear_eax12.dts [new file with mode: 0644]
target/linux/ramips/image/mt7621.mk
target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
target/linux/ramips/mt7621/base-files/etc/board.d/02_network
target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh