Gabor Juhos [Fri, 26 Apr 2013 17:00:47 +0000 (17:00 +0000)]
firmware-utils/mktplinkfw: add support for the TL-WR720N v3 board
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36455
John Crispin [Tue, 9 Apr 2013 14:19:33 +0000 (14:19 +0000)]
Add Netgear WNCE2001 (OF version)
Add Netgear WNCE2001.
This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.
Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming
The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.
The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.
http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36289
Gabor Juhos [Mon, 11 Mar 2013 15:55:23 +0000 (15:55 +0000)]
firmware-utils/mktplinkfw: Add support for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3441/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35963
Gabor Juhos [Mon, 25 Feb 2013 20:37:32 +0000 (20:37 +0000)]
firmware-utils/mktplinkfw: add support for the TL-WA830RE v1/v2 boards
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35787
Gabor Juhos [Wed, 13 Feb 2013 16:51:24 +0000 (16:51 +0000)]
firmware-utils/mktplinkfw: add support for the TL-WDR4900 v1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35593
Gabor Juhos [Sat, 2 Feb 2013 10:01:11 +0000 (10:01 +0000)]
firmware-utils/mktplinkfw: add TP-LINK TL-WR743ND v2 support
AR9331 based, these same as 741v4
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35448
John Crispin [Sun, 6 Jan 2013 11:11:30 +0000 (11:11 +0000)]
adds support for Edimax BR-6524N
fixes #12754
Signed-off-by: <rq@akl.lt>
SVN-Revision: 35019
Gabor Juhos [Wed, 19 Dec 2012 08:50:43 +0000 (08:50 +0000)]
firmware-utils/mktplinkfw: add support for the TL-MR3220 v2
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34781
Gabor Juhos [Mon, 17 Dec 2012 12:28:15 +0000 (12:28 +0000)]
firmware-utils/mkfwimage2: allow to use numbers in partition names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34729
Gabor Juhos [Fri, 7 Dec 2012 19:10:54 +0000 (19:10 +0000)]
firmware-utils/mktplinkfw: add support for TP-LINK WA801NDv1
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34575
Gabor Juhos [Tue, 13 Nov 2012 14:48:02 +0000 (14:48 +0000)]
firmware-utils/mktplinkfw: add support for TL-WA7510N
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34189
Gabor Juhos [Thu, 18 Oct 2012 07:23:09 +0000 (07:23 +0000)]
firmware-utils: new tool for fixing U-Media firmware headers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33848
Gabor Juhos [Thu, 18 Oct 2012 07:22:57 +0000 (07:22 +0000)]
tools/firmware-utils: add seama tool
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33840
Jonas Gorski [Mon, 8 Oct 2012 09:59:50 +0000 (09:59 +0000)]
firmware-utils: move bcm_tag.h here
Since there is only one user of bcm_tag.h left, we can safely move it
into the firmware-utils directory, replacing the symlink.
SVN-Revision: 33655
Gabor Juhos [Wed, 22 Aug 2012 20:15:34 +0000 (20:15 +0000)]
tools/firmware-utils: add a new tool for TEW-712BR firmware generation
SVN-Revision: 33233
John Crispin [Wed, 22 Aug 2012 09:22:38 +0000 (09:22 +0000)]
tools/firmware-utils/ptgen option to use MB rounding
SVN-Revision: 33218
Gabor Juhos [Fri, 17 Aug 2012 17:56:02 +0000 (17:56 +0000)]
tools/firmware-utils: add tool for DIR-651-H1 firmware generation
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>
SVN-Revision: 33204
Jo-Philipp Wich [Sun, 12 Aug 2012 12:34:30 +0000 (12:34 +0000)]
use HOST_STATIC_LINKING instead of hardcoding -static
SVN-Revision: 33140
Jo-Philipp Wich [Fri, 10 Aug 2012 19:27:08 +0000 (19:27 +0000)]
firmware-utils: link statically
SVN-Revision: 33117
John Crispin [Tue, 24 Jul 2012 20:38:49 +0000 (20:38 +0000)]
adds mkdapimg
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32822
Gabor Juhos [Thu, 5 Jul 2012 16:25:29 +0000 (16:25 +0000)]
firmware-utils/mktplinkfw: allow to specify firmware version
SVN-Revision: 32616
Jonas Gorski [Sun, 27 May 2012 13:22:19 +0000 (13:22 +0000)]
tools: imagetag: add parameter for padding images
Allow images to be padded to a certain size. This prevents CFE from
flashing them to the second image offset.
SVN-Revision: 31875
Gabor Juhos [Sat, 5 May 2012 17:02:38 +0000 (17:02 +0000)]
firmware-utils/mktplinkfw: add support for the TL-WR1041N v2
Patch-by: Vince Huang <axishero@foxmail.com>
SVN-Revision: 31609
Gabor Juhos [Sat, 18 Feb 2012 14:45:54 +0000 (14:45 +0000)]
firmware-utils/mkfwimage: allow to override firmware magic
SVN-Revision: 30627
John Crispin [Tue, 14 Feb 2012 17:48:04 +0000 (17:48 +0000)]
Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.
This patch add two firmware utilities, mkbrncmdline and mkbrnboot.
mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.
mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.
The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage
The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.
A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 30532
Gabor Juhos [Thu, 26 Jan 2012 17:01:43 +0000 (17:01 +0000)]
firmware-utils/mkmylofw: add WPE72 support
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
SVN-Revision: 29913
John Crispin [Sun, 15 Jan 2012 11:43:13 +0000 (11:43 +0000)]
tools: clean up Makefiles / make ccache work
SVN-Revision: 29754
Gabor Juhos [Sat, 7 Jan 2012 19:36:40 +0000 (19:36 +0000)]
firware-utils/mktplinkfw: add TL-WR2543N/ND support
SVN-Revision: 29681
Gabor Juhos [Wed, 4 Jan 2012 17:30:53 +0000 (17:30 +0000)]
firmware-utils/mktplinkfw: add support for TL-WA701N/ND
SVN-Revision: 29655
Gabor Juhos [Wed, 4 Jan 2012 17:30:44 +0000 (17:30 +0000)]
firmware-utils/mktplinkfw: add support for TL-MR3020
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
SVN-Revision: 29650
Gabor Juhos [Thu, 15 Dec 2011 22:03:42 +0000 (22:03 +0000)]
firmware-utils/mktplinkfw: add ability to put jffs2 eof marker into the image
SVN-Revision: 29544
Gabor Juhos [Tue, 6 Dec 2011 16:26:41 +0000 (16:26 +0000)]
tools/mktplinkfw: allow to specify hw_id, hw_rev and flash_layout
SVN-Revision: 29466
Gabor Juhos [Mon, 5 Dec 2011 14:52:31 +0000 (14:52 +0000)]
firmware-utils/mktplinkfw: allow to align the rootfs on a specified boundary
SVN-Revision: 29445
Gabor Juhos [Sat, 3 Dec 2011 16:57:21 +0000 (16:57 +0000)]
firmware-utils/mktplinkfw: fix combined image creation
SVN-Revision: 29409
Gabor Juhos [Thu, 24 Nov 2011 20:09:40 +0000 (20:09 +0000)]
firmware-utils/mktplinfw: use htonl/ntohl
Based on a patch by Adrian Chadd <adrian@freebsd.org>
SVN-Revision: 29327
Gabor Juhos [Tue, 1 Nov 2011 11:20:54 +0000 (11:20 +0000)]
firmware-utils/mktplinkfw: add TL-WR741ND v4
SVN-Revision: 28707
Vasilis Tsiligiannis [Sun, 30 Oct 2011 22:57:41 +0000 (22:57 +0000)]
Add firmware tool for generating factory images for Edimax devices
SVN-Revision: 28688
Gabor Juhos [Wed, 26 Oct 2011 13:34:48 +0000 (13:34 +0000)]
firmware-utils/mktplinkfw: fix hardware id of the TL-WR740 v3
SVN-Revision: 28602
Gabor Juhos [Wed, 21 Sep 2011 11:47:55 +0000 (11:47 +0000)]
firmware-utils/mktplinkfw: add support for TL-WR703N v1
Patch-by: dongyuqi <729650915@qq.com>
SVN-Revision: 28278
Gabor Juhos [Wed, 21 Sep 2011 11:47:42 +0000 (11:47 +0000)]
firmware-utils/mktplinkfw: add support for TL-WR743ND v1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 28270
Gabor Juhos [Wed, 21 Sep 2011 11:47:39 +0000 (11:47 +0000)]
firmware-utils/mktplinkfw: add support for TL-WR740N v3
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>
SVN-Revision: 28268
Felix Fietkau [Fri, 8 Jul 2011 05:20:24 +0000 (05:20 +0000)]
firmware-utils: rename the devname variable in mkwrgimg to avoid a clash with a BSD stdlib function
SVN-Revision: 27553
Gabor Juhos [Wed, 6 Jul 2011 08:04:53 +0000 (08:04 +0000)]
tools/firmware-utils: add yet another buffalo tool
SVN-Revision: 27475
Gabor Juhos [Wed, 6 Jul 2011 08:04:50 +0000 (08:04 +0000)]
tools/firmware-utils: allow to create buffalo image from two files
SVN-Revision: 27473
Gabor Juhos [Wed, 6 Jul 2011 08:04:49 +0000 (08:04 +0000)]
tools/firmware-utils: allow to create buffalo tags w/o hw version
SVN-Revision: 27472
Gabor Juhos [Mon, 4 Jul 2011 06:48:42 +0000 (06:48 +0000)]
tools/firmware-utils: add new firmware tool for the DIR-300-B1 board
SVN-Revision: 27438
Hauke Mehrtens [Tue, 21 Jun 2011 21:13:58 +0000 (21:13 +0000)]
firmware-utils: fix build on big endian systems
This closes #9446
SVN-Revision: 27255
Gabor Juhos [Mon, 13 Jun 2011 08:12:41 +0000 (08:12 +0000)]
tools/firmware-utils: fix buffalo csum calculation
Also print an error message if decryption fails.
SVN-Revision: 27167
Gabor Juhos [Tue, 31 May 2011 22:53:24 +0000 (22:53 +0000)]
tools/firmware-utils: add support for hd_id tag into mkdniimg
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 27052
Gabor Juhos [Tue, 31 May 2011 22:53:21 +0000 (22:53 +0000)]
tools/firmware-utils: add buffalo specific fw tools
SVN-Revision: 27050
Florian Fainelli [Wed, 11 May 2011 13:34:05 +0000 (13:34 +0000)]
bcm63xx: Add firmware helpers for T-Home Speedport W 303V
Add two helpers for generating correctly tagged images for the T-Home
Speedport W 303V Typ B as well as xor'd ones as required by CFE.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26877
Daniel Dickinson [Fri, 15 Apr 2011 12:18:25 +0000 (12:18 +0000)]
bcm63xx: Move the OpenWrt rootfs length field
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.
To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.
Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26680
Hauke Mehrtens [Sat, 9 Apr 2011 15:06:01 +0000 (15:06 +0000)]
firmware-utils: fix endianness bugs in firmware generation program.
Should make it work on big endian systems again, I do not have such a system.
This closes #9093.
SVN-Revision: 26543
Gabor Juhos [Sun, 13 Mar 2011 15:08:29 +0000 (15:08 +0000)]
firmware-utils/mktplinkfw: add support for the TP-Link TL-WA901ND v2 board
Patch-by: Jonathan Benett <jbscience87@gmail.com>
SVN-Revision: 26118
Hauke Mehrtens [Sat, 12 Feb 2011 13:17:47 +0000 (13:17 +0000)]
brcm47xx: fix error when build firmware on x86_64 host (closes #7672)
SVN-Revision: 25472
Gabor Juhos [Fri, 14 Jan 2011 10:37:09 +0000 (10:37 +0000)]
firmware-utils/mkdniimg: don't use NA region by default
SVN-Revision: 24981
Gabor Juhos [Fri, 14 Jan 2011 10:37:04 +0000 (10:37 +0000)]
firmware-utils/wndr3700: allow to specify image magic via command line
SVN-Revision: 24980
Daniel Dickinson [Sun, 26 Dec 2010 04:18:13 +0000 (04:18 +0000)]
Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size.
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
SVN-Revision: 24838
Gabor Juhos [Thu, 23 Dec 2010 12:42:16 +0000 (12:42 +0000)]
ar71xx: add support for TL-WR740N v1
Same as TL-WR741ND but with different hardware ID and without
detachable antenna.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 24811
Gabor Juhos [Fri, 17 Dec 2010 20:34:31 +0000 (20:34 +0000)]
firmware-utils/mkzynfw: fix available flash space calculation
SVN-Revision: 24653
Gabor Juhos [Fri, 10 Dec 2010 17:57:43 +0000 (17:57 +0000)]
firmware-utils/mktplinkfw: add support for the TL-MR3220 v1
SVN-Revision: 24438
Hauke Mehrtens [Thu, 2 Dec 2010 21:27:54 +0000 (21:27 +0000)]
brcm47xx: Add edimax PS1208mfg support
Thank you clemvangelis for the patches. (closes #7672)
SVN-Revision: 24217
Daniel Dickinson [Tue, 16 Nov 2010 06:46:53 +0000 (06:46 +0000)]
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above).
SVN-Revision: 24011
Daniel Dickinson [Mon, 15 Nov 2010 04:08:09 +0000 (04:08 +0000)]
brcm63xx: imagetag: Fixed occaisonal wrong CRC in image due to using strncpy to copy the CRC into the imagetag. strncpy stops copying after a 00 byte, memcpy doesn't.
SVN-Revision: 24000
Gabor Juhos [Mon, 27 Sep 2010 14:54:02 +0000 (14:54 +0000)]
firmware-utils/mktplinkfw: add support for the TL-MR3420 v1
SVN-Revision: 23137
Gabor Juhos [Mon, 27 Sep 2010 14:53:51 +0000 (14:53 +0000)]
firmware-utils/mktplinkfw: add support for the TL-WR841N v7
SVN-Revision: 23133
Michael Büsch [Sat, 4 Sep 2010 05:40:56 +0000 (05:40 +0000)]
Zcomax device firmware tool endianness fix
SVN-Revision: 22885
Gabor Juhos [Fri, 3 Sep 2010 18:14:40 +0000 (18:14 +0000)]
tools/firmware-utils: new tool for the Zcomax devices
SVN-Revision: 22883
Hauke Mehrtens [Fri, 6 Aug 2010 20:21:32 +0000 (20:21 +0000)]
brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2
Thank you realopty for the patch.
tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/
This closes #7702.
SVN-Revision: 22516
Hauke Mehrtens [Fri, 30 Jul 2010 21:19:49 +0000 (21:19 +0000)]
mostly revert commit r22396
CFE does not boot images generated with these checksums because of
wrong checksum.
After flashing then with tftp to my Asus wl500-GPv1 the following messages
are show:
Null Rescue Flag.
Boot program checksum is invalid
Hello!! Enter Rescue Mode: (Check error)
SVN-Revision: 22418
Michael Büsch [Thu, 29 Jul 2010 18:14:10 +0000 (18:14 +0000)]
firmware-utils/trx: Endianness fixes
SVN-Revision: 22414
Hauke Mehrtens [Tue, 27 Jul 2010 18:16:32 +0000 (18:16 +0000)]
firmware-utils: The option -F was not detected. This was missing in r22396
This fixes build of brcm47xx
SVN-Revision: 22398
Markus Wigge [Tue, 27 Jul 2010 15:37:37 +0000 (15:37 +0000)]
fix CRC32 calculation for sysupgrade
* reduce image size for CRC calculation by fs_mark size
sysupgrade sometimes failed for me and I noticed that it was due
to incorrect CRC values in trx-header after performing it.
It seems that the fs_mark was completely included in the calculation
and that it was nevertheless modified by sysupgrade while appending
the jffs data.
This only occurs for the first boot after sysupgrade as the flashmap
driver recalculates the CRC to an even smaller area when it boots.
SVN-Revision: 22396
Gabor Juhos [Tue, 13 Jul 2010 16:51:59 +0000 (16:51 +0000)]
tools/firmware-utils: enhance mktplinkfw utility
Attached patch enhances the mktplinkfw utility:
1. existing firmware files in TP-Link format can now be inspected, showing eg. the used offsets
2. optionally the kernel and rootfs parts can be extracted (saves calculations for dd)
3. when generating firmwares, kernel entry point, load address and rootfs offset can be overwritten (for experienced users)
Patch-by: Pieter "Fate" Hollants <pieter@hollants.com>
SVN-Revision: 22169
Gabor Juhos [Thu, 1 Jul 2010 14:49:04 +0000 (14:49 +0000)]
firmware-utils/mktplinkfw: add support for the TL-WA901ND
Patch-by: Pieter "Fate" Hollants <pieter@hollants.com>
SVN-Revision: 22015
Markus Wigge [Thu, 1 Jul 2010 10:40:22 +0000 (10:40 +0000)]
preset stable and try* flags for TRX2 headers
* changed addpattern.c to preset the stable and try flags used in TRXv2 images
to dupe CFE and pretend a stable image.
* changed trx.c to calculate TRXv2 CRC with stable and try flags set to 0xFF
like CFE does on startup
* fixed compile warnings in trx.c by explicit casting
SVN-Revision: 22012
Markus Wigge [Mon, 28 Jun 2010 17:35:20 +0000 (17:35 +0000)]
fixed trx version to handling
I forgot to write the right trx version to the actual header...
SVN-Revision: 21986
Florian Fainelli [Sun, 20 Jun 2010 11:58:40 +0000 (11:58 +0000)]
remove whitespaces in imagetag tool
SVN-Revision: 21848
Florian Fainelli [Mon, 14 Jun 2010 21:49:03 +0000 (21:49 +0000)]
Revert r21806 there are no users of it yet
SVN-Revision: 21808
Florian Fainelli [Mon, 14 Jun 2010 21:47:21 +0000 (21:47 +0000)]
add hcsmakeimage, for cable modems/routers based on bcm33xx
SVN-Revision: 21806
Florian Fainelli [Sat, 12 Jun 2010 18:10:01 +0000 (18:10 +0000)]
fix mktitanimg segfault on 64-bits hosts (#7443)
SVN-Revision: 21767
Florian Fainelli [Sun, 6 Jun 2010 19:16:43 +0000 (19:16 +0000)]
add mktitanimg to create Titan (AR7-based) images (#6632)
SVN-Revision: 21689
Gabor Juhos [Fri, 14 May 2010 09:20:36 +0000 (09:20 +0000)]
firmware-utils/mkzynfw: add support for the NBG460N board
Adding NBG460N/550N/550NH boards to mkzynfw.
Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>
SVN-Revision: 21446
Gabor Juhos [Fri, 14 May 2010 09:20:34 +0000 (09:20 +0000)]
firmware-utils/mkzynfw: don't use next_offset twice (closes #7273)
The test if a file can fit in an image considers the current offset
twice. So a image that would fit is too big.
Thanks-to: Michael Kurz <michi.kurz@googlemail.com>
SVN-Revision: 21445
Gabor Juhos [Mon, 26 Apr 2010 18:28:07 +0000 (18:28 +0000)]
tools/firmware-utils: add size check to the mkplanexfw tool
Also pad the image to a 64K boundary.
SVN-Revision: 21174
Nicolas Thill [Mon, 12 Apr 2010 17:08:57 +0000 (17:08 +0000)]
remove 'svn:executable' property
SVN-Revision: 20831
Florian Fainelli [Thu, 1 Apr 2010 21:20:43 +0000 (21:20 +0000)]
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore.
SVN-Revision: 20652
Florian Fainelli [Sun, 28 Mar 2010 18:11:06 +0000 (18:11 +0000)]
move bcm_tag.h out of the flashmap patch so that user-land tools can re-use it
SVN-Revision: 20548
Gabor Juhos [Sat, 27 Mar 2010 17:38:26 +0000 (17:38 +0000)]
firmware-utils/trx: add relative offset parameter
* will be used for the WRT160NL board
* patch by Bernhard Loos
* note: rejected parts has been fixed
SVN-Revision: 20522
Florian Fainelli [Fri, 26 Mar 2010 10:12:30 +0000 (10:12 +0000)]
revert r18760 since it prevents people from building working eva images
SVN-Revision: 20437
Markus Wigge [Thu, 25 Mar 2010 19:34:49 +0000 (19:34 +0000)]
added support for wrt54g3gv2-vf and new trx header format
- hacked addpattern due to changes in header format
- added "-5" to addpattern, some 0xFF are needed for trx2 header
"-4" broke CRC checking in CFE
- hacked trx.c due to new header format version
- added target to create trx-V2 images
the flashmap driver possibly needs to be customized.
SVN-Revision: 20433
Florian Fainelli [Thu, 18 Mar 2010 23:35:12 +0000 (23:35 +0000)]
fix file creation mode, thanks rtz
SVN-Revision: 20293
Gabor Juhos [Wed, 10 Mar 2010 17:41:50 +0000 (17:41 +0000)]
mktplinkfw: add option to strip padding from the end of the image
SVN-Revision: 20120
Gabor Juhos [Mon, 8 Mar 2010 17:35:07 +0000 (17:35 +0000)]
mktplinkfw: fix help string, and remove duplicated option
SVN-Revision: 20067
Gabor Juhos [Fri, 19 Feb 2010 11:52:30 +0000 (11:52 +0000)]
firmware-utils/mktplinkfw: add board definitions for TL-WR941ND v4
SVN-Revision: 19748
Jo-Philipp Wich [Mon, 1 Feb 2010 01:56:02 +0000 (01:56 +0000)]
firmware-utils: unify cc and cc2 macros, simplifies Makefile
SVN-Revision: 19487
Jo-Philipp Wich [Mon, 1 Feb 2010 01:17:46 +0000 (01:17 +0000)]
firmware-utils: copy bcm_tag.h to src/ and get rid of cc3 macro, fixes imagetag compilation
SVN-Revision: 19485
Gabor Juhos [Tue, 22 Dec 2009 19:31:28 +0000 (19:31 +0000)]
ar71xx: add support for the TL-WR841N v1.5 board
SVN-Revision: 18893
Michael Büsch [Fri, 11 Dec 2009 23:50:51 +0000 (23:50 +0000)]
lzma2eva: Endianness fixes.
SVN-Revision: 18760
Gabor Juhos [Tue, 8 Dec 2009 12:46:30 +0000 (12:46 +0000)]
ar71xx: TL-WR1043ND support cleanup
SVN-Revision: 18697
projects / project / firmware-utils.git / log