Jean-Michel Lacroix [Tue, 10 Nov 2015 18:36:57 +0000 (13:36 -0500)]
bandwidthd: Addition of 2 variants of the bandwidthd package.
Addition of the bandwithd package variant from the oldpackage
Addition of the bandwidthd-pgsql package variant that can save also
in a postgres database.
Compile tested on CC and trunk (ar71xx and mvebu in both cases)
run tested on CC (ar71xx) and trunk (r47397 on mvebu)
Signed-off-by: Jean-Michel Lacroix <lacroix@lepine-lacroix.info>
John Crispin [Fri, 6 Nov 2015 21:34:59 +0000 (22:34 +0100)]
libmraa: board detection was broken after the name changed
Signed-off-by: John Crispin <blogic@openwrt.org>
Álvaro Fernández Rojas [Sun, 1 Nov 2015 15:19:56 +0000 (16:19 +0100)]
unzip: patch CVE-2015-7696, CVE-2015-7697 and integer underflow
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
John Crispin [Mon, 26 Oct 2015 16:15:00 +0000 (17:15 +0100)]
madplay: some build variant related fixes
the 2 variants could not be built at the same time
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Sat, 24 Oct 2015 07:57:36 +0000 (09:57 +0200)]
node: disable MIPS16
Signed-off-by: John Crispin <blogic@openwrt.org>
Jo-Philipp Wich [Fri, 23 Oct 2015 12:19:45 +0000 (14:19 +0200)]
python: fix two build depend issues
Build depends must refer to the source package name, not the binary one,
therefore we need to use `bzip2` in order to enforce a build of libbz2.so.
Also make the host python build depend on the bzip2 host build in order to
ensure that host python is built with bzip2 support. We don't need a build
dependency for the target python as this already depends on +libbz2 through
python-light. That package dependency in turn implies a build dependency.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Nikos Mavrogiannopoulos [Thu, 22 Oct 2015 05:33:06 +0000 (07:33 +0200)]
gnutls: update to 3.4.6
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
John Crispin [Wed, 21 Oct 2015 08:44:49 +0000 (10:44 +0200)]
node-cylon: dont double build firmata and serialport
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Tue, 20 Oct 2015 13:58:30 +0000 (15:58 +0200)]
libupm: add fixes for 2 sensors
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Tue, 20 Oct 2015 11:23:30 +0000 (13:23 +0200)]
swig: make it compile even if pcre libs are not available
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Tue, 20 Oct 2015 11:23:01 +0000 (13:23 +0200)]
node: add a python/host dependency
Signed-off-by: John Crispin <blogic@openwrt.org>
Etienne CHAMPETIER [Fri, 16 Oct 2015 15:16:34 +0000 (15:16 +0000)]
zabbix: enable IPv6 support
compile tested on trunk, run tested on CC (ar71xx)
size before:
96757 zabbix-agentd_2.4.6-1_ar71xx.ipk
29180 zabbix-get_2.4.6-1_ar71xx.ipk
258979 zabbix-proxy_2.4.6-1_ar71xx.ipk
35121 zabbix-sender_2.4.6-1_ar71xx.ipk
282885 zabbix-server_2.4.6-1_ar71xx.ipk
size after:
97359 zabbix-agentd_2.4.6-2_ar71xx.ipk
29841 zabbix-get_2.4.6-2_ar71xx.ipk
259948 zabbix-proxy_2.4.6-2_ar71xx.ipk
35801 zabbix-sender_2.4.6-2_ar71xx.ipk
284019 zabbix-server_2.4.6-2_ar71xx.ipk
original PR by Thomas Bahn <thomas-bahn@gmx.net>
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
John Crispin [Mon, 19 Oct 2015 13:59:58 +0000 (15:59 +0200)]
swig: add PKG_LICENSE_FILE
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Mon, 19 Oct 2015 13:49:38 +0000 (15:49 +0200)]
node-hid: set proper version and revision
* fix revision variables
* fix version variables
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Mon, 19 Oct 2015 13:48:12 +0000 (15:48 +0200)]
node-hid: set proper version and revision
* fix revision variables
* fix version variables
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Mon, 19 Oct 2015 13:47:40 +0000 (15:47 +0200)]
node-cylon: add proper download path and set version properly
* fix version
* fix download path
* fix version variables
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Mon, 19 Oct 2015 13:46:03 +0000 (15:46 +0200)]
node-arduino-firmata: set proper download path and set version properly
* fix download path
* fix version variables
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Mon, 19 Oct 2015 13:26:56 +0000 (15:26 +0200)]
madplay: add PKG_RELEASE and keep oss variants name
* update PKG_RELEASE
* dont change the name of the oss variant
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Fri, 2 Oct 2015 09:10:24 +0000 (11:10 +0200)]
madplay: add alsa build variant
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Sun, 2 Aug 2015 06:27:09 +0000 (08:27 +0200)]
yunbridge: add linux side python code
to make the bridge work we need to run an askfirst instance on the ttyS.
additionally add the lua scripts needed to make REST work. this is really ugly
code but it works. i already cleaned up to the original code, but there are still
issues such as a new luci session being created for each request.
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Wed, 19 Aug 2015 10:50:49 +0000 (12:50 +0200)]
libupm: add package
upm is a sensor library that sits ontop of libmraa. it has support for a large
number of sensors and exports bindings for node, python, ...
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Sun, 2 Aug 2015 06:26:13 +0000 (08:26 +0200)]
libmraa: add mraa including mips platform code
mraa is a lowlevel io bus abstraction layer. it allows us to export bindings for
various linux io busses for node, python, ...
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Sun, 2 Aug 2015 06:26:39 +0000 (08:26 +0200)]
nodejs: add 0.12 version of node
add node-js 0.12 and a few gyp bindings
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Fri, 2 Oct 2015 11:30:29 +0000 (13:30 +0200)]
swig: add host build
this is a binding generator needed to build node plugins
Signed-off-by: John Crispin <blogic@openwrt.org>
Steven Barth [Tue, 13 Oct 2015 08:06:28 +0000 (10:06 +0200)]
Merge pull request #1791 from MikePetullo/for-15.05-krb5
krb5: update to 1.13.2
John Crispin [Fri, 2 Oct 2015 08:51:49 +0000 (10:51 +0200)]
python-serial: backport from master branch to for-15.05
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Thu, 1 Oct 2015 15:34:13 +0000 (17:34 +0200)]
cgi-io: add a small helper cgi that can be used by RPCD based UIs
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Thu, 1 Oct 2015 15:11:12 +0000 (17:11 +0200)]
spi-tools: add new package
this package adds 2 tools that can be used to control spidev devices from userland
Signed-off-by: John Crispin <blogic@openwrt.org>
Yousong Zhou [Fri, 2 Oct 2015 00:16:41 +0000 (08:16 +0800)]
xl2tpd: bump version
The update is mainly for addressing some memory corruption and segementation
faults issues observed when running xl2tpd in OpenWrt. The relevant upstream
pull request was at link [1]
[1] Devel fix valgrind #77, https://github.com/xelerance/xl2tpd/pull/77
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
John Crispin [Fri, 21 Aug 2015 23:11:29 +0000 (01:11 +0200)]
python: add dependency to bz2 host build
Signed-off-by: John Crispin <blogic@openwrt.org>
Marko Ratkaj [Thu, 24 Sep 2015 09:02:18 +0000 (11:02 +0200)]
squild: bump version to 3.5.9
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
Marko Ratkaj [Thu, 24 Sep 2015 12:57:32 +0000 (14:57 +0200)]
lxc: bump version to 1.1.3
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
Marko Ratkaj [Thu, 24 Sep 2015 09:08:44 +0000 (11:08 +0200)]
file: bump version to 5.25
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
Marko Ratkaj [Thu, 24 Sep 2015 11:04:36 +0000 (13:04 +0200)]
e2guardian: bump version to 3.2.0
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
Yousong Zhou [Thu, 17 Sep 2015 09:40:59 +0000 (17:40 +0800)]
xl2tpd: fix by backporting the version from master branch
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Karl Palsson [Fri, 25 Sep 2015 14:00:23 +0000 (14:00 +0000)]
mosquitto: update to 1.4.4
More information: http://mosquitto.org/2015/09/version-1-4-4-released/
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Nikos Mavrogiannopoulos [Thu, 24 Sep 2015 08:07:00 +0000 (10:07 +0200)]
libtasn1: updated to 4.7
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Nikos Mavrogiannopoulos [Thu, 24 Sep 2015 08:05:27 +0000 (10:05 +0200)]
gnutls: updated to 3.4.5
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Nikos Mavrogiannopoulos [Thu, 24 Sep 2015 07:57:37 +0000 (09:57 +0200)]
radcli: updated to 1.2.3
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Steven Barth [Tue, 22 Sep 2015 08:42:24 +0000 (10:42 +0200)]
Merge pull request #1794 from MikePetullo/for-15.05-lighttpd
lighttpd: update to 1.4.37
W. Michael Petullo [Mon, 21 Sep 2015 00:18:04 +0000 (20:18 -0400)]
lighttpd: update to 1.4.37
Signed-off-by: W. Michael Petullo <mike@flyn.org>
W. Michael Petullo [Mon, 21 Sep 2015 00:12:46 +0000 (20:12 -0400)]
lighttpd: update to 1.4.37
Signed-off-by: W. Michael Petullo <mike@flyn.org>
W. Michael Petullo [Sun, 20 Sep 2015 23:41:16 +0000 (19:41 -0400)]
krb5: update to 1.13.2
Signed-off-by: W. Michael Petullo <mike@flyn.org>
Daniel Golle [Wed, 16 Sep 2015 13:41:51 +0000 (15:41 +0200)]
tracertools: update source URL
rip gitorious.org
[backport of commit
c6b65ce on master]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Gergely Kiss [Sun, 30 Aug 2015 17:00:08 +0000 (19:00 +0200)]
sudo: upgrade to version 1.8.14p3
Signed-off-by: Gergely Kiss <mail.gery@gmail.com>
Alexander Tsoy [Sun, 28 Jun 2015 11:33:09 +0000 (14:33 +0300)]
sudo: preserve sudoers.d during sysupgrade
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Steven Barth [Tue, 15 Sep 2015 06:31:35 +0000 (08:31 +0200)]
Merge pull request #1733 from hnyman/collectd-entropy
collectd: backport the entropy plugin and changes to example config file
Markus Stenberg [Mon, 14 Sep 2015 11:51:06 +0000 (14:51 +0300)]
mdnsresponder: fix fd leak for IPv6 sockets
Signed-off-by: Steven Barth <steven@midlink.org>
Nuno Goncalves [Sat, 12 Sep 2015 11:11:03 +0000 (12:11 +0100)]
tcsh: update source mirrors
Signed-off-by: Nuno Goncalves <nunojpg@gmail.com>
Steven Barth [Thu, 10 Sep 2015 15:47:00 +0000 (17:47 +0200)]
Merge pull request #1762 from pdxmeshnet/for-15.05
zmq fixes from master
heil [Wed, 9 Sep 2015 18:49:16 +0000 (20:49 +0200)]
haproxy: fixes from upstream
- [PATCH 14/16] BUG/MINOR: http: remove stupid HTTP_METH_NONE entry
- [PATCH 15/16] BUG/MAJOR: http: don't call http_send_name_header()
- [PATCH 16/16] BUG/MINOR: tools: make str2sa_range() report
Signed-off-by: heil <heil@terminal-consulting.de>
Nicolas Thill [Fri, 1 May 2015 10:49:52 +0000 (12:49 +0200)]
luarocks: update to 2.2.2
Signed-off-by: Nicolas Thill <nico@openwrt.org>
Daniel Salzman [Tue, 8 Sep 2015 09:20:07 +0000 (11:20 +0200)]
knot: update to 1.6.5
Signed-off-by: Daniel Salzman <daniel.salzman@nic.cz>
Daniel Salzman [Tue, 7 Jul 2015 12:55:57 +0000 (14:55 +0200)]
knot: update to 1.6.4
Signed-off-by: Daniel Salzman <daniel.salzman@nic.cz>
Ted Hess [Sat, 4 Jul 2015 14:46:53 +0000 (10:46 -0400)]
zmq: Make 2 variants, refresh patches, fix C++ build issues
Signed-off-by: Ted Hess <thess@kitschensync.net>
Dirk Chang [Wed, 17 Jun 2015 14:56:26 +0000 (22:56 +0800)]
libzmq upgrade to 4.1.1
lzmq upgrade to 0.4.3
Signed-off-by: Dirk Chang <dirk@kooiot.com>
Ted Hess [Thu, 14 May 2015 18:24:18 +0000 (14:24 -0400)]
lzmq: Use smaller .tar.gz source package
Signed-off-by: Ted Hess <thess@kitschensync.net>
Steven Barth [Mon, 7 Sep 2015 09:06:37 +0000 (11:06 +0200)]
strongswan: bump to 5.3.3
Signed-off-by: Steven Barth <steven@midlink.org>
Marcin Jurkowski [Mon, 13 Apr 2015 00:52:47 +0000 (02:52 +0200)]
strongswan: make kmod-ipsec6 dependency conditional
Makes kmod-ipsec6 requirement dependent on IPv6 support for packages.
This allows to disable unnecessary IPv6 kernel modules, saving
considerable amount of space.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Dirk Feytons [Thu, 27 Aug 2015 12:09:18 +0000 (14:09 +0200)]
strongswan: add a couple more plugins
Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
Ulrich Weber [Tue, 25 Aug 2015 08:12:58 +0000 (10:12 +0200)]
strongswan: dont overwrite ipsec.conf and ipsec.user during upgrade
Signed-off-by: Ulrich Weber <uw@ocedo.com>
Yousong Zhou [Tue, 11 Aug 2015 05:26:03 +0000 (13:26 +0800)]
strongswan: split out libtls.so as a separate package.
When only strongswan-minimal is selected, libtls.so will not be built
yet package strongswan will still try to copy the file causing build
failure.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Adam Lebsack [Wed, 15 Jul 2015 14:33:07 +0000 (16:33 +0200)]
strongswan: Added strongswan-mod-eap-tls
Signed-off-by: Adam Lebsack <alebsack@gmail.com>
Steven Barth [Tue, 23 Jun 2015 16:40:54 +0000 (18:40 +0200)]
strongswan: add more exceptions to musl-fixes
Signed-off-by: Steven Barth <steven@midlink.org>
Steven Barth [Mon, 22 Jun 2015 10:24:19 +0000 (12:24 +0200)]
strongswan: refresh musl compatibility fixes
Signed-off-by: Steven Barth <steven@midlink.org>
heil [Sun, 6 Sep 2015 22:00:45 +0000 (00:00 +0200)]
haproxy: fixes from upstream
- [PATCH 05/13] BUG/MINOR: http/sample: gmtime/localtime can fail
- [PATCH 06/13] DOC: typo in 'redirect', 302 code meaning
- [PATCH 07/13] DOC: mention that %ms is left-padded with zeroes.
- [PATCH 08/13] CLEANUP: .gitignore: ignore more test files
- [PATCH 09/13] CLEANUP: .gitignore: finally ignore everything but what
- [PATCH 10/13] MEDIUM: config: emit a warning on a frontend without
- [PATCH 11/13] BUG/MEDIUM: counters: ensure that src_{inc,clr}_gpc0
- [PATCH 12/13] DOC: ssl: missing LF
- [PATCH 13/13] DOC: fix example of http-request using
Signed-off-by: heil <heil@terminal-consulting.de>
heil [Sun, 6 Sep 2015 21:53:35 +0000 (23:53 +0200)]
unixodbc: bump to version 2.3.4
Signed-off-by: heil <heil@terminal-consulting.de>
heil [Mon, 24 Aug 2015 08:40:38 +0000 (10:40 +0200)]
unixodbc: update to 2.3.3
Signed-off-by: heil <heil@terminal-consulting.de>
Nikos Mavrogiannopoulos [Fri, 4 Sep 2015 19:29:56 +0000 (21:29 +0200)]
ocserv: updated to 0.10.8
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Nikos Mavrogiannopoulos [Wed, 8 Jul 2015 17:39:19 +0000 (19:39 +0200)]
openconnect: corrected port descriptions in README
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Nikos Mavrogiannopoulos [Wed, 8 Jul 2015 06:16:30 +0000 (08:16 +0200)]
ocserv: more explicit documentation
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Nikos Mavrogiannopoulos [Wed, 1 Jul 2015 22:22:33 +0000 (00:22 +0200)]
ocserv: updated to 0.10.6
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Hannu Nyman [Fri, 4 Sep 2015 12:03:58 +0000 (15:03 +0300)]
collectd: backport "Clarify config file example/placeholder" from #1736
The config file shipped with collectd dates from 2010 and
leads to error messages if luci-statistics & collectd are installed,
as it references several plugins not usually installed, or such ones
that have been renamed since then.
For most users, this file is just a placeholder during collectd installation,
as /usr/bin/stat-genconfig from /etc/init.d/luci_statistics will overwrite it.
Sanitize and shorten the placeholder config file:
* Reference actively only the default plugins installed by luci statistics.
* Match the placeholder config with the genuine config from luci statistics.
If somebody uses collectd separately from luci statistics, he will need to
edit these settings anyway.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Hannu Nyman [Fri, 4 Sep 2015 12:03:58 +0000 (15:03 +0300)]
collectd: backport the enablement of entropy plugin to for-15.05
Enable 'entropy' plugin also for collectd 5.4.2.
Works ok.
( backport of https://github.com/openwrt/packages/commit/
35552db4ee8162b5c85f2a9e370177681a70431c )
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Daniel Gimpelevich [Sun, 12 Jul 2015 10:15:29 +0000 (03:15 -0700)]
vpnc: bump release
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Daniel Gimpelevich [Fri, 10 Jul 2015 20:27:10 +0000 (13:27 -0700)]
vpnc: corrected call to proto_add_host_dependency
Jo-Philipp Wich [Wed, 17 Jun 2015 22:28:37 +0000 (00:28 +0200)]
vpnc: fix musl compatibility
- Add missing `sys/ttydefaults.h` include to `config.c`
- Restrict usage of `error.h` to glibc and uclibc only
- Avoid including `linux/if_tun.h` on non-glibc/uclibc to prevent
musl kernel/libc header conflicts
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Jo-Philipp Wich [Thu, 3 Sep 2015 15:34:10 +0000 (17:34 +0200)]
Merge pull request #1753 from zorun/bmon_15.05_
bmon: Add missing runtime dependency: terminfo
Baptiste Jonglez [Thu, 3 Sep 2015 14:33:13 +0000 (16:33 +0200)]
bmon: Add missing runtime dependency: terminfo
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
Toke Høiland-Jørgensen [Thu, 3 Sep 2015 13:30:35 +0000 (15:30 +0200)]
sqm-scripts: Bump to v1.0.3.
Backported changes from master.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Noah Meyerhans [Wed, 2 Sep 2015 22:28:11 +0000 (15:28 -0700)]
[bind] Update to 9.9.7-P3 to fix CVE-2015-5722 and CVE-2015-5986
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
Noah Meyerhans [Fri, 14 Aug 2015 15:29:01 +0000 (08:29 -0700)]
bind: update to version 9.9.7-p2
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
Alexander Ryzhov [Wed, 20 May 2015 09:10:01 +0000 (09:10 +0000)]
xz: add xz-utils meta package
Signed-off-by: Alexander Ryzhov <openwrt@ryzhov-al.ru>
Jan Čermák [Tue, 1 Sep 2015 09:26:54 +0000 (11:26 +0200)]
libevent: update to 1.4.15 (fixes CVE-2014-6272)
This update fixes CVE-2014-6272. Change of source URL was needed,
because the older location does not contain the latest version.
Signed-off-by: Jan Čermák <jan.cermak@nic.cz>
Steven Barth [Sat, 29 Aug 2015 06:41:54 +0000 (08:41 +0200)]
Merge pull request #1728 from roger-/micropython-15.05
micropython: update to latest (15.05)
Roger [Fri, 28 Aug 2015 15:36:49 +0000 (10:36 -0500)]
micropython: update to latest
Signed-off-by: Roger D <rogerdammit@gmail.com>
John Crispin [Wed, 26 Aug 2015 10:18:20 +0000 (12:18 +0200)]
python: remove bz2 build dep
Revert "python: add dependency to bz2 host build"
This reverts commit
da6d7b57f501eaece621f8f834646aa22b618fa5.
Signed-off-by: John Crispin <blogic@openwrt.org>
Nikos Mavrogiannopoulos [Wed, 26 Aug 2015 20:59:29 +0000 (22:59 +0200)]
openconnect: disabled the resolving code from ppp in netifd script
That code was causing netifd disabling openconnect with no way
to restart it.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
John Crispin [Tue, 25 Aug 2015 22:24:33 +0000 (00:24 +0200)]
avrdude: enable linux-gpio by default
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Tue, 25 Aug 2015 14:19:36 +0000 (16:19 +0200)]
bluelog: mark as BROKEN
the CC Buildservers are failing on this package as the OUI download timesout indefinatley.
Signed-off-by: John Crispin <blogic@openwrt.org>
heil [Mon, 24 Aug 2015 08:44:59 +0000 (10:44 +0200)]
haproxy: fixes for upstream version 1.5.14
- [PATCH 1/4] BUG/MINOR: log: missing some ARGC_* entries in
- [PATCH 2/4] DOC: usesrc root privileges requirements
- [PATCH 3/4] BUILD: ssl: Allow building against libssl without SSLv3.
- [PATCH 4/4] DOC/MINOR: fix OpenBSD versions where haproxy works
Signed-off-by: heil <heil@terminal-consulting.de>
John Crispin [Fri, 21 Aug 2015 23:14:04 +0000 (01:14 +0200)]
libuv: fix download path
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Fri, 21 Aug 2015 23:11:29 +0000 (01:11 +0200)]
python: add dependency to bz2 host build
Signed-off-by: John Crispin <blogic@openwrt.org>
Etienne CHAMPETIER [Sun, 23 Aug 2015 21:57:35 +0000 (21:57 +0000)]
zabbix: update to 2.4.6 (and refresh patches)
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Daniel Golle [Thu, 30 Jul 2015 02:16:31 +0000 (04:16 +0200)]
sqlite3: update source to 3.8.11.1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Ted Hess [Wed, 19 Aug 2015 18:54:26 +0000 (14:54 -0400)]
Merge pull request #1678 from luizluca/for-15.05-ruby_update
ruby: bump version to 2.2.3 [backport from trunk]
Luiz Angelo Daros de Luca [Wed, 19 Aug 2015 17:04:03 +0000 (14:04 -0300)]
ruby: bump version to 2.2.3
This is a bug and security fix release, including:
- CVE-2015-3900 Request hijacking vulnerability in RubyGems 2.4.6 and earlier
http://svn.ruby-lang.org/repos/ruby/tags/v2_2_3/ChangeLog
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Rafał Miłecki [Thu, 13 Aug 2015 20:19:17 +0000 (22:19 +0200)]
lighttpd: backport a fix for running out of filedescriptors
It was breaking uploads of files 4 MiB+. This patch fixes:
https://github.com/openwrt/packages/issues/1658
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
heil [Mon, 17 Aug 2015 12:34:29 +0000 (14:34 +0200)]
apache: bump to version 2.2.31
Signed-off-by: heil <heil@terminal-consulting.de>
Marcel Denia [Mon, 3 Aug 2015 11:07:12 +0000 (13:07 +0200)]
libidn: Update to 1.32
Signed-off-by: Marcel Denia <naoir@gmx.net>
projects / feed / packages.git / log