modemmanager: bump to 1.14.0

Signed-off-by: Nicholas Smith <nicholas.smith@telcoantennas.com.au>

libqmi: bump to 1.26.0

Signed-off-by: Nicholas Smith <nicholas.smith@telcoantennas.com.au>

libmbim: bump to 1.24.0

Signed-off-by: Nicholas Smith <nicholas.smith@telcoantennas.com.au>

Merge pull request #12709 from m01/bugfix-mwan3-config-load

mwan3: Fix mwan3 start not doing anything

Merge pull request #12669 from neheb/logr

logrotate: update to 3.16.0

Merge pull request #12721 from neheb/forke

forked-daapd: fix compilation with GCC10

Merge pull request #12715 from neheb/can2

canutils: switch to CMake

Merge pull request #12711 from neheb/urcu

liburcu: install pkgconfig files

Merge pull request #12682 from jonathanunderwood/stubby-0.3.0

stubby: update to version 0.3.0

Merge pull request #12679 from jonathanunderwood/getdns-1.6.0

getdns: update to version 1.6.0

Merge pull request #12586 from tiagogaspar8/bind-update-9-16-4

bind: update to 9.16.4

getdns: update to version 1.6.0

This update also:
    - enables parallel builds
    - moves to the CMake build system
    - removes the redundant InstallDev stanza

Signed-off-by: Jonathan G. Underwood <jonathan.underwood@gmail.com>

syncthing: increase inotify limit

default inotify limits at 8k are
low for serious usage
and the GUI shows errors like
"Failed to start filesystem watcher
for folder XXXX"
increase them with this config file
as instructed by syncthing's FAQ.
https://docs.syncthing.net/users/
faq.html#inotify-limits

Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
[bumped PKG_RELEASE]
Signed-off-by: Paul Spooren <mail@aparcar.org>

forked-daapd: fix compilation with GCC10

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Merge pull request #12719 from neheb/png3

libpng: remove hardware optimizations for mipsel

libpng: remove hardware optimizations for mipsel

The mipsel optimizations are only MSA and not any DSP, which means they're
useless for OpenWrt targets.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Merge pull request #12718 from Grommish/master

[Snort3/Snort+] Fix Big-Endian compile issues

canutils: switch to CMake

Allows simplifying the Makefile. Faster compilation as well.

Revert b70cb0ef5ed196247bd4bcce3cb84167420eeb4d

That commit was misleading and ended up bloating the Utilities section.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

[Snort3/Snort+] Fix Big-Endian compile issues

Signed-off-by: Donald Hoskins <grommish@gmail.com>

Merge pull request #12590 from commodo/numpy2

numpy: bump to version 1.19.0

Merge pull request #12338 from alinnastac/rtsp-pb_discon

xtables-addons: fix RTSP helper support for client_port=x/y Transport…

Merge pull request #12692 from qweaszxcdf/openfortivpn

openfortivpn: Remove pingcheck and use l3_device instead

bind: update to 9.16.4

This update fixes the following CVE's:
- CVE-2020-8618
- CVE-2020-8619

More info on bug fixes and feature changes in:
https://downloads.isc.org/isc/bind9/9.16.4/doc/arm/html/notes.html

Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>

openfortivpn: bump PKG_RELEASE

Signed-off-by: Ryan Shi <qweaszxcdfsh@gmail.com>

Merge pull request #12689 from jmarcet/docker-ce-update

docker-ce: update to version 19.03.12

Merge pull request #12603 from neheb/ossh

openssh: update to 8.3p1

Merge pull request #12633 from neheb/freet

freetype: update to 2.10.2

Merge pull request #12510 from neheb/git

git: update to 2.27.0

Merge pull request #12656 from gladiac1337/liburing-0.6

liburing: new package: liburing v0.6

Merge pull request #12636 from neheb/png2

libpng: switch to CMake

Merge pull request #12693 from datafl4sh/datafl4sh/add_gnuplot_package

gnuplot: Added package.

Merge pull request #12690 from jmarcet/docker-compose-update

docker-compose: update to version 1.26.1

liburcu: install pkgconfig files

Newer versions of lttng* need these.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

libowfat: fix compilation under GCC10

Signed-off-by: Rosen Penev <rosenp@gmail.com>

mwan3: Fix mwan3 start not doing anything
Due to a missing config load function call, mwan3 start runs ifup for an empty
list of interfaces, thus not calling ifup at all.

This commit introduces the missing config_load call.

Signed-off-by: Michiel Blokzijl <code@m01.eu>

Merge pull request #12697 from Andy2244/samba-4_12_5

samba4: update to 4.12.5

Merge pull request #12696 from neheb/nta

netatalk: fix compilation with GCC10

Merge pull request #12702 from neheb/davf

davfs2: fix compilation with GCC10

Merge pull request #12699 from neheb/rad

libradiotap: update to 2020-06-22

shadowsocks-libev: fix compilation with GCC10

Signed-off-by: Rosen Penev <rosenp@gmail.com>

davfs2: fix compilation with GCC10

Signed-off-by: Rosen Penev <rosenp@gmail.com>

libradiotap: update to 2020-06-22

Fixes compilation with GCC10.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

docker-compose: Update to version 1.26.2, drop six dep

Signed-off-by: Javier Marcet <javier@marcet.info>

python-urllib3: Update to version 1.25.9

Signed-off-by: Javier Marcet <javier@marcet.info>

python-certifi: bump to 2020.6.20

Signed-off-by: Javier Marcet <javier@marcet.info>

python-docker: Update to 4.2.2

Signed-off-by: Javier Marcet <javier@marcet.info>

samba4: update to 4.12.5

* update to 4.12.5
* fixes CVE-2020-10730, CVE-2020-10745, CVE-2020-10760, CVE-2020-14303
* add fix-musl_missing__nss_buflen_passwd.patch
* remove fixed tirpc include
* add extra CONFIGURE_VARS (XSLTPROC=false, WAF_NO_PREFORK=1)

Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>

netatalk: fix compilation with GCC10

Upstream patch: https://github.com/Netatalk/Netatalk/pull/125

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Merge pull request #12606 from neheb/zsh

zsh: update to 5.8

Merge pull request #12695 from BKPepe/mc-mouse-handling

mc: fix mouse handling

mc: fix mouse handling

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

gnuplot: Added package.

About the patch: Gnuplot build process includes the compilation of some
custom binaries which are subsequently used to generate help files/docs.
Since those binaries are compiled for TARGET, this breaks the build on
the HOST. The patch disables the generation of those binaries (and the
documentation).

Signed-off-by: Matteo Cicuttin <datafl4sh@toxicnet.eu>

openfortivpn: Remove pingcheck and use l3_device instead

Signed-off-by: Ryan Shi <qweaszxcdfsh@gmail.com>

liburing: Simplify CFLAGS assignment for MUSL targets

- Simplify the way we deal with additional CFLAGS for MUSL targets

Signed-off-by: Christian Lachner <gladiac@gmail.com>

Merge pull request #12691 from jmarcet/pyrsistent-update

python-pyrsistent: Update to 0.16.0

Merge pull request #12663 from rfrankla/netcat_002_patch

netcat: fix Illegal instruction on listen udp

Merge pull request #12674 from ldir-EDB0/miniupnpd

miniupnpd: macosx compat and refresh patches

Merge pull request #12670 from neheb/neto

Netopeer2: fix compilation with GCC10

Merge pull request #12652 from neheb/ykp

ykpers: fix compilation with GCC10

Merge pull request #12668 from neheb/oplc

open-plc-utils: fix compilation with GCC10

Merge pull request #12646 from neheb/minis

minisatip: fix compilation with GCC10

Merge pull request #12684 from neheb/owfs

owfs: fix compilation with GCC10

Merge pull request #12683 from neheb/minic

minicom: fix compilation with GCC10

Merge pull request #12675 from axet/master

add miniupnpd ipv6_disable option, #11971 close

Merge pull request #12671 from zhanhb/postinst-alternatives

treewide: alternatives instead of postinst, {pre,post}rm

Merge pull request #12687 from padre-lacroix/darkstat-ssh

darkstat: correct incompatbility with sshd

Merge pull request #12685 from neheb/squa

squashfs-tools: fix compilation with GCC10

liburing: Re-enable stack-protection for uClibc targets

- Remove -fno-stack-protector for uClibc targets
- Make TITLE a little nicer

Signed-off-by: Christian Lachner <gladiac@gmail.com>

tcsh: fix compilation with GCC10

Signed-off-by: Rosen Penev <rosenp@gmail.com>

miniupnpd: add miniupnpd ipv6_disable option, #11971 close

Signed-off-by: Alexey Kuznetsov <axet@me.com>

python-pyrsistent: Update to 0.16.0

Signed-off-by: Javier Marcet <javier@marcet.info>

libnetwork: Updated to 026aabaa for docker 19.03.12

Signed-off-by: Javier Marcet <javier@marcet.info>

docker-ce: Updated to 19.03.12

Signed-off-by: Javier Marcet <javier@marcet.info>

darkstat: correct incompatbility with sshd
The init file of darkstat is creating the pid in /var/empty and
setting the owner of the directory to darkstat which is incompatible
with sshd as sshd requires /var/empty to be owned by root and not
group or world-writable.  See issue #12420.

This corrects the problem by creating another directory: /var/darkstat
instead without setting the owner, which is not actually required.
Compile tested: not applicable as the changes do not involve
compilation.
Tested on my home router running darkstat.

Signed-off-by: Jean-Michel Lacroix <lacroix@lepine-lacroix.info>

Merge pull request #12666 from neheb/band

bandwidthd: fix compilation with GCC10

squashfs-tools: fix compilation with GCC10

Upstream backport.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

owfs: fix compilation with GCC10

Upstream backport.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

minicom: fix compilation with GCC10

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Merge pull request #12664 from neheb/dum

dump1900: fix compilation with GCC10

stubby: update to version 0.3.0

Signed-off-by: Jonathan G. Underwood <jonathan.underwood@gmail.com>

Merge pull request #12665 from neheb/reads

readsb: fix compilation with GCC10

miniupnpd: macosx compat and refresh patches

Tidy up some minor patch fuzz with a refresh.

Also tweak the linux makefile to make it run on macosx and linux:
install only understand -m for filemode, not that the openwrt staging
dir understands file modes.  Also glibc>2.17 so patch out the check that
otherwise barfs a number of errors from a missing 'ldd' command under
macos.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

Merge pull request #12672 from eduardoabinader/opusfile-0.15

opusfile: bump 0.12

Merge pull request #12667 from neheb/ocd

openocd: fix compilation with GCC10

openocd: fix compilation with GCC10

Signed-off-by: Rosen Penev <rosenp@gmail.com>

numpy: bump to version 1.19.0

Bump host Cython version as well.
Add note near PKG_VERSION to remember to periodically update it.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

opusfile: bump 0.12

Changes since the v0.11 release:

    Fix stack overflow buffering out-of-sequence streams.
    Fix possible divide-by-zero.
    Fix issues with seeking in the win32 backend.
    Fix an issue where the seek algorithm could be confused by stream data changing between reads.
    Clean up compiler and scan-build warnings.
    Avoid use of the deprecated ftime() function which has Y2038 problems.
    Remove undefined behaviour memcpy(NULL) in op_read_native().
    Visual Studio project files updated for libogg 1.3.4 library name change.
    Various build systems updates.
    Various integration and testing environment improvements.

Signed-off-by: Eduardo Abinader <eduardoabinader@gmail.com>

Netopeer2: fix compilation with GCC10

Refreshed openssl patch.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

logrotate: update to 3.16.0

Fixes compilation with GCC10.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

open-plc-utils: fix compilation with GCC10

Signed-off-by: Rosen Penev <rosenp@gmail.com>

netcat: fix Illegal instruction on listen udp

When listening to a udp port an Illegal instruction occurs.
This did NOT happen when compiled with debug on.

Fixes issue openwrt#4747, FS#2937

Signed-off-by: Rick Frankland <rfrankla@yahoo.com>

bandwidthd: fix compilation with GCC10

Added PKG_BUILD_PARALLEL for faster compilation.

Fixed license information.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

readsb: fix compilation with GCC10

Upstream backport.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

dump1900: fix compilation with GCC10

Upstream backport.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Merge pull request #12653 from jefferyto/python-no-parallel-host-pip-install

python-packages: Disable parallel build when host pip is needed

Merge pull request #12654 from zokl/javascript-obfuscator_1.2.2

javascript-obfuscator: update to 1.2.2

Merge pull request #12655 from wvdakker/master

Shorewall: Bump to 5.2.5.2

Merge pull request #12660 from eduardoabinader/check_0.15

check: bump 0.15.0

check: bump 0.15.0

Compiled and run in x86_64.

Changes:
        -Define CK_ATTRIBUTE_FORMAT for GCC >= 2.95.3, to make use of ‘gnu_printf’ format attribute
        -Refactor tests to fix signed - unsigned conversions
        -Refactor some Check internals to use proper interger types
Signed-off-by: Eduardo Abinader <eduardoabinader@gmail.com>

Merge pull request #12619 from Cynerd/syslog-ng-network-failover

syslog-ng: detect disabled IPv6 on loopback and fallback to IPv4