openwrt/staging/dedeckeh.git
5 years agoopenssl: update to 1.0.2s openwrt-18.06
Eneas U de Queiroz [Sat, 1 Jun 2019 13:25:37 +0000 (15:25 +0200)]
openssl: update to 1.0.2s

Highlights of this version:
- Change default RSA, DSA and DH size to 2048 bit
- Reject invalid EC point coordinates
  This avoids CVE-2019-9498 and CVE-2019-9499 in hostapd

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
5 years agokernel: Fix arc kernel 4.14 build
Hauke Mehrtens [Sat, 18 May 2019 08:59:04 +0000 (10:59 +0200)]
kernel: Fix arc kernel 4.14 build

This fixes a patch for the ARC architecture.

This was found by the build bot.

Fixes: 810ee3b84a2b ("kernel: bump 4.14 to 4.14.104")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agocurl: Fix multiple security problems
Hauke Mehrtens [Fri, 17 May 2019 20:40:26 +0000 (22:40 +0200)]
curl: Fix multiple security problems

This fixes the following security problems:
* CVE-2018-14618: NTLM password overflow via integer overflow
* CVE-2018-16839: SASL password overflow via integer overflow
* CVE-2018-16840: use-after-free in handle close
* CVE-2018-16842: warning message out-of-buffer read
* CVE-2019-3823:  SMTP end-of-response out-of-bounds read
* CVE-2019-3822:  NTLMv2 type-3 header stack buffer overflow
* CVE-2018-16890: NTLM type-2 out-of-bounds buffer read

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agombedtls: update to version 2.16.1
Hauke Mehrtens [Fri, 17 May 2019 20:20:09 +0000 (22:20 +0200)]
mbedtls: update to version 2.16.1

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agokernel: bump 4.14 to 4.14.121
Koen Vandeputte [Fri, 24 May 2019 11:46:07 +0000 (13:46 +0200)]
kernel: bump 4.14 to 4.14.121

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.178
Koen Vandeputte [Fri, 24 May 2019 07:59:45 +0000 (09:59 +0200)]
kernel: bump 4.9 to 4.9.178

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agouci: fix heap use after free (FS#2288)
Hans Dedecker [Thu, 23 May 2019 20:00:23 +0000 (22:00 +0200)]
uci: fix heap use after free (FS#2288)

f199b96 uci: fix options list of section after type change

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agobrcm63xx: drop linux,part-probe usage where possible
Jonas Gorski [Sun, 29 Jul 2018 11:09:22 +0000 (13:09 +0200)]
brcm63xx: drop linux,part-probe usage where possible

It was present as 4.4 compatibility, but since we now use 4.9 or later
with the new upstream solution, we don't need it anymore.

This also fixes a serious regression introduced by ac9bcefa3b04, which
changed the precedence of linux,part-probe and the new-type partitions
node compatible string, causing caldata partitions to be overwritten.

Fixes: ac9bcefa3b04 ("kernel: use V10 of mtd patchset adding support for "compatible" string")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
(cherry picked from commit 7880a6f7fee89efe9e5e4c707b59ba45f02e21cf)

5 years agobrcm63xx: drop own implementation of DT partitions in favour of upstream
Jonas Gorski [Sun, 29 Jul 2018 10:53:49 +0000 (12:53 +0200)]
brcm63xx: drop own implementation of DT partitions in favour of upstream

The binding works the same, so we can just drop the revert and the patch.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
(cherry picked from commit abb28bec251a0b243dff87f87d09763792128349)

5 years agokernel: bump 4.14 to 4.14.120
Koen Vandeputte [Mon, 20 May 2019 08:32:50 +0000 (10:32 +0200)]
kernel: bump 4.14 to 4.14.120

Refreshed all patches.

Altered patches:
- 0067-generic-Mangle-bootloader-s-kernel-arguments.patch
- 006-mvebu-Mangle-bootloader-s-kernel-arguments.patch
- 996-generic-Mangle-bootloader-s-kernel-arguments.patch

Compile-tested on: cns3xxx, imx6, mvebu
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.177
Koen Vandeputte [Fri, 17 May 2019 12:34:09 +0000 (14:34 +0200)]
kernel: bump 4.9 to 4.9.177

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.14 to 4.14.119
Koen Vandeputte [Wed, 15 May 2019 11:32:44 +0000 (13:32 +0200)]
kernel: bump 4.14 to 4.14.119

Refreshed all patches.

Compile-tested on: cns3xxx, imx6, x86_64
Runtime-tested on: cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.176
Koen Vandeputte [Wed, 15 May 2019 10:33:28 +0000 (12:33 +0200)]
kernel: bump 4.9 to 4.9.176

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agoar71xx: Fix network setup for TP-Link Archer C25 v1
Adrian Schmutzler [Thu, 9 May 2019 15:02:36 +0000 (17:02 +0200)]
ar71xx: Fix network setup for TP-Link Archer C25 v1

Network for the Archer C25 v1 is set up without switch for no
obvious reason. The LED setup is even done switch-based.

This patch changes network setup so a switch is created.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years agokernel: Fix arc kernel build
Hauke Mehrtens [Fri, 17 May 2019 19:59:52 +0000 (21:59 +0200)]
kernel: Fix arc kernel build

This fixes a patch for the ARC architecture.

This was found by the build bot.

Fixes: 5183df0dbf5f ("kernel: bump 4.9 to 4.9.161")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agouboot-fritz4040: Add host flags for host compiler
Hauke Mehrtens [Fri, 17 May 2019 19:32:50 +0000 (21:32 +0200)]
uboot-fritz4040: Add host flags for host compiler

This adds the host staging directory to the include path to make it use
the zlib.h files from the staging include directory and also link
against the zlib version from the staging directory.

This fixes a compile problem when the zlib header were not installed on
the build host.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agoramips: rt305x: Reduce size of a5-v11 image
Hauke Mehrtens [Tue, 14 May 2019 20:46:51 +0000 (22:46 +0200)]
ramips: rt305x: Reduce size of a5-v11 image

The root file system of the a5-v11 image was too big and broke the
build, remove the USB modules from the default image to make it smaller.
This should fix the build again.

This was found by the build bot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agokernel: bump 4.14 to 4.14.118
Koen Vandeputte [Mon, 13 May 2019 11:53:42 +0000 (13:53 +0200)]
kernel: bump 4.14 to 4.14.118

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.175
Koen Vandeputte [Mon, 13 May 2019 08:54:43 +0000 (10:54 +0200)]
kernel: bump 4.9 to 4.9.175

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.14 to 4.14.115
Koen Vandeputte [Thu, 2 May 2019 12:36:00 +0000 (14:36 +0200)]
kernel: bump 4.14 to 4.14.115

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.172
Koen Vandeputte [Thu, 2 May 2019 12:34:36 +0000 (14:34 +0200)]
kernel: bump 4.9 to 4.9.172

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.14 to 4.14.114
Koen Vandeputte [Mon, 29 Apr 2019 10:13:16 +0000 (12:13 +0200)]
kernel: bump 4.14 to 4.14.114

Refreshed all patches.

Altered patches:
- 150-bridge_allow_receiption_on_disabled_port.patch
- 201-extra_optimization.patch

Remove upstreamed:
- 022-0006-crypto-crypto4xx-properly-set-IV-after-de-and-encryp.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.171
Koen Vandeputte [Mon, 29 Apr 2019 10:11:16 +0000 (12:11 +0200)]
kernel: bump 4.9 to 4.9.171

Refreshed all patches.

Altered patches:
- 150-bridge_allow_receiption_on_disabled_port.patch
- 201-extra_optimization.patch

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agoRevert "uhttpd: disable concurrent requests by default"
Jo-Philipp Wich [Tue, 23 Apr 2019 06:12:49 +0000 (08:12 +0200)]
Revert "uhttpd: disable concurrent requests by default"

This reverts commit c6aa9ff38870a30dbe6da17e4edad6039fe10ddf.

Further testing has revealed that we will need to allow concurrent
requests after all, especially for situations where CGI processes
initiate further HTTP requests to the local host.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit f00a4ae6e0b1f7b3d84e11e8dc4dd562088584e0)

5 years agotools/pkg-config: Handle variable substitution of 'bindir' to redirect to STAGING_DIR/bin
Ted Hess [Tue, 13 Nov 2018 20:40:30 +0000 (15:40 -0500)]
tools/pkg-config: Handle variable substitution of 'bindir' to redirect to STAGING_DIR/bin

Signed-off-by: Ted Hess <thess@kitschensync.net>
(cherry picked from commit 042d68a19593ac796098845366a235f5465816da)

5 years agotools/pkg-config: pass arguments at the end
Arthur Skowronek [Mon, 15 Oct 2018 12:55:57 +0000 (14:55 +0200)]
tools/pkg-config: pass arguments at the end

Go for openwrt passes pkg-config arguments in the format of

        pkg-config --cflags -- pkg-name

which in turn will be passed down to the real pkg-config as something
like

        pkg-config.real --cflags -- pkg-name --define...

and causes the real pkg-config implementation to missinterpret the given
argument list.

This also helps to fix https://github.com/golang/go/issues/27940

Signed-off-by: Arthur Skowronek <arthur.skowronek@tuta.io>
(cherry picked from commit 5f2cb6d7dc9de24bec7b1139f8d785f0e7588eed)

5 years agokernel: bump 4.14 to 4.14.113
Koen Vandeputte [Mon, 22 Apr 2019 19:54:59 +0000 (21:54 +0200)]
kernel: bump 4.14 to 4.14.113

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.170
Koen Vandeputte [Mon, 22 Apr 2019 19:54:26 +0000 (21:54 +0200)]
kernel: bump 4.9 to 4.9.170

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.14 to 4.14.112
Koen Vandeputte [Thu, 18 Apr 2019 13:11:42 +0000 (15:11 +0200)]
kernel: bump 4.14 to 4.14.112

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.169
Koen Vandeputte [Thu, 18 Apr 2019 13:10:21 +0000 (15:10 +0200)]
kernel: bump 4.9 to 4.9.169

Refreshed all patches.

New symbols:
- CONFIG_PPC_BARRIER_NOSPEC
- CONFIG_LDISC_AUTOLOAD

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agoar71xx: GL.iNet AR300M family: correct LED definitions
Andreas Ziegler [Mon, 25 Feb 2019 00:19:59 +0000 (01:19 +0100)]
ar71xx: GL.iNet AR300M family: correct LED definitions

remove USB as this is no LED but power control
rename WiFi LED with correct color red (like in stock firmware)
set middle LED to be used for LAN link/activity

Signed-off-by: Andreas Ziegler <dev@andreas-ziegler.de>
(cherry picked from commit 53c46b504c630e4c9c5a00bf644a69919bfc0c03)

5 years agoca-certificates: update to version 20190110
Josef Schlehofer [Wed, 13 Mar 2019 23:53:41 +0000 (00:53 +0100)]
ca-certificates: update to version 20190110

- Tested on Turris MOX, OpenWrt master
- Removed PKG_BUILD_DIR
In build_dir there were two folders
ca-certificates and ca-certificates-20190110 and it failed as files
were in ca-certificates-20190110

Signed-off-by: Josef Schlehofer <josef.schlehofer@nic.cz>
(cherry picked from commit f22c33b40cc7b542b3b31fa0d873d28d3a3482b5)

5 years agomac80211: brcmfmac: really add early fw crash recovery
Rafał Miłecki [Thu, 18 Apr 2019 10:37:10 +0000 (12:37 +0200)]
mac80211: brcmfmac: really add early fw crash recovery

Previous commit backported USB fixes instead of firmware crash recovery
patches.

Fixes: 02aed76968d6 ("mac80211: brcmfmac: early work on FullMAC firmware crash recovery")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agomac80211: brcmfmac: early work on FullMAC firmware crash recovery
Rafał Miłecki [Thu, 18 Apr 2019 09:47:43 +0000 (11:47 +0200)]
mac80211: brcmfmac: early work on FullMAC firmware crash recovery

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agolantiq: tdw89x0: Fix WLAN LED on TP-Link W8970 v1.2 (FS#2232)
Petr Štetiar [Wed, 10 Apr 2019 08:10:33 +0000 (10:10 +0200)]
lantiq: tdw89x0: Fix WLAN LED on TP-Link W8970 v1.2 (FS#2232)

This patch fixes disfunctional WLAN LED on TP-Link W8970. The LED was
reported working in the CC release[1], but doesn't work anymore in 18.06.2.

1. https://github.com/openwrt/chaos_calmer/commit/420cb24d41fcd650795f09d2b26e0e1d2cf21165

Tested-by: Damian Janarek <dzanar18@o2.pl>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agoar71xx: Fix IMAGE_SIZE for TP-Link Archer C7 v5
Adrian Schmutzler [Mon, 8 Apr 2019 12:59:48 +0000 (14:59 +0200)]
ar71xx: Fix IMAGE_SIZE for TP-Link Archer C7 v5

IMAGE_SIZE for C7v5 is wrong in openwrt-18.06, looks like it
was just copied from C7v4. In master, this got fixed with the
introduction of dynamic partitioning in
https://github.com/openwrt/openwrt/commit/7c78be1b747eb0c8d64da67deb3a8aec75bd7b9c

However, this is not connected to the changes introduced there,
but also applies to the static partitioning in openwrt-18.06.
It appears to be simply wrong at the moment ...

Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years agoar71xx: Correct MAC address for WAN interface of Archer C7 v5
Adrian Schmutzler [Wed, 3 Apr 2019 17:05:19 +0000 (19:05 +0200)]
ar71xx: Correct MAC address for WAN interface of Archer C7 v5

This device shares the network config with v4, thus the WAN MAC
also needs to be fixed the same way. However, the partition
where the MAC address resides has been changed.

Backport of commit 93d23aced24c2e620461e1b0448d35be21f7e501

Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years agoar71xx: Add "info" partition for TP-Link Archer C7 v5
Adrian Schmutzler [Thu, 4 Apr 2019 12:16:19 +0000 (14:16 +0200)]
ar71xx: Add "info" partition for TP-Link Archer C7 v5

This adds the "info" MTD partition, as it is specified in the
ath79 DTS:
https://github.com/openwrt/openwrt/blob/master/target/linux/ath79/dts/qca9563_tplink_archer-c7-v5.dts#L35

This is required to set the WAN MAC address, as it is build based
on the LAN MAC address, which in turn has to be read from the
"info" partition:
https://github.com/openwrt/openwrt/blob/master/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi#L184

Backport of commit 9aa8f87d277bf2f666fa5bf90c5efd59dd044d54

Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years agoar71xx: Remove ath10k packages from archer-c7-v1 (fixes FS#1743)
Aubrey McIntosh, PhD [Tue, 4 Sep 2018 06:40:10 +0000 (01:40 -0500)]
ar71xx: Remove ath10k packages from archer-c7-v1 (fixes FS#1743)

ath10k_pci driver crashes once loaded and causes boot loops on this
device as 5GHz radio QCA9880-AR1A shipped with this router is broken.
It's not possible to fix this problem in software, miniPCIe radio has to
be replaced.

We could've probably fixed crashing of the ath10k driver by reverting
following upstream commit:

 commit 1a7fecb766c83dace747f42b25bbb544b00a0163
 Author: Michal Kazior <michal.kazior@tieto.com>
 Date:   Sat Jan 24 12:14:48 2015 +0200

    ath10k: reset chip before reading chip_id in probe

but it's not worth the effort as it wouldn't make that 5GHz radio usable
anyway. So it seems more convenient to just remove the crashing driver
and provide bootable images, as I believe, that a router that is working
but degraded is better than a router that will not work.

For details please see discussions in PR[1] and in FS#1743[2].

1. https://github.com/openwrt/openwrt/pull/1349
2. https://bugs.openwrt.org/index.php?do=details&task_id=1743

Reviewed-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Aubrey McIntosh, PhD <aubrey.mcintosh@utexas.edu>
[subject and commit message tweaks]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agokernel: bump 4.14 to 4.14.111
Koen Vandeputte [Mon, 8 Apr 2019 11:52:02 +0000 (13:52 +0200)]
kernel: bump 4.14 to 4.14.111

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.168
Koen Vandeputte [Mon, 8 Apr 2019 11:50:17 +0000 (13:50 +0200)]
kernel: bump 4.9 to 4.9.168

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.14 to 4.14.110
Koen Vandeputte [Fri, 5 Apr 2019 10:13:50 +0000 (12:13 +0200)]
kernel: bump 4.14 to 4.14.110

Refreshed all patches.

Compile-tested on: cns3xxx, imx6, x86_64
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.167
Koen Vandeputte [Fri, 5 Apr 2019 10:07:38 +0000 (12:07 +0200)]
kernel: bump 4.9 to 4.9.167

Refreshed all patches.

Compile-test on: ar71xx
Runtime-test on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agoopenssl: update to 1.0.2r
Stijn Segers [Sat, 6 Apr 2019 21:16:31 +0000 (23:16 +0200)]
openssl: update to 1.0.2r

This bump contains bug and security fixes.

Compile-tested on ar71xx, ramips/mt7621 and x86/64.
Run-tested on ramips/mt7621.

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_HASH fixup]
5 years agokernel: bump 4.14 to 4.14.109
Koen Vandeputte [Fri, 29 Mar 2019 13:22:50 +0000 (14:22 +0100)]
kernel: bump 4.14 to 4.14.109

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.166
Koen Vandeputte [Fri, 29 Mar 2019 13:04:00 +0000 (14:04 +0100)]
kernel: bump 4.9 to 4.9.166

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.14 to 4.14.108
Koen Vandeputte [Mon, 25 Mar 2019 10:57:36 +0000 (11:57 +0100)]
kernel: bump 4.14 to 4.14.108

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.165
Koen Vandeputte [Mon, 25 Mar 2019 10:56:10 +0000 (11:56 +0100)]
kernel: bump 4.9 to 4.9.165

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.14 to 4.14.107
Koen Vandeputte [Wed, 20 Mar 2019 12:30:20 +0000 (13:30 +0100)]
kernel: bump 4.14 to 4.14.107

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.164
Koen Vandeputte [Wed, 20 Mar 2019 11:22:42 +0000 (12:22 +0100)]
kernel: bump 4.9 to 4.9.164

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agoramips: allow packets with ttl=0
Felix Fietkau [Sun, 24 Mar 2019 11:05:56 +0000 (12:05 +0100)]
ramips: allow packets with ttl=0

Some broken ISPs (e.g. Comcast) send DHCPv6 packets with hop limit=0.
This trips up the TTL=0 check in the PPE if enabled.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agomt76: update to latest openwrt-18.06 branch
Felix Fietkau [Sat, 23 Mar 2019 17:46:08 +0000 (18:46 +0100)]
mt76: update to latest openwrt-18.06 branch

9e3ef1f mt7603: fix sequence number assignment
a5f5605 mt7603: send BAR after powersave wakeup

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agokernel: bump 4.14 to 4.14.106
Koen Vandeputte [Thu, 14 Mar 2019 13:25:00 +0000 (14:25 +0100)]
kernel: bump 4.14 to 4.14.106

Refreshed all targets.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.163
Koen Vandeputte [Thu, 14 Mar 2019 13:23:25 +0000 (14:23 +0100)]
kernel: bump 4.9 to 4.9.163

Refreshed all targets.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agoipq40xx: copy Fritz4040 UBoot to STAGING_DIR_IMAGE
David Bauer [Fri, 4 Jan 2019 20:17:20 +0000 (21:17 +0100)]
ipq40xx: copy Fritz4040 UBoot to STAGING_DIR_IMAGE

Copy U-Boot to STAGING_DIR_IMAGE (and append it to the EVA-image from
there) to fix image generation using the image-builder.

Also remove the bootloader from DEVICE_PACKAGES and instead use the
BUILD_DEVICES directive from within the U-Boot makefile.

This fixes eva-image generation using the OpenWRT image-builder.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 634c733065256979835ca3d7218ae8203a693683)

5 years agotools/libelf: Add mirrors as main site is dead
Daniel Engberg [Thu, 14 Mar 2019 07:25:49 +0000 (08:25 +0100)]
tools/libelf: Add mirrors as main site is dead

Main site hasn't resolved for days so just add a few mirrors instead

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit a56c21f582810a28e9493dcfae584132d7ea9451)

5 years agomt76: update to latest openwrt-18.06 branch
Felix Fietkau [Sat, 16 Mar 2019 20:21:10 +0000 (21:21 +0100)]
mt76: update to latest openwrt-18.06 branch

00ac79d mt7603: fix initialization of max rx length
320af65 mt76: mt7603: use the correct hweight8() function
bdee924 mt76: fix schedule while atomic in mt76x02_reset_state
abcb544 mt76x02: do not enable RTS/CTS by default

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agobusybox: add missing install dir
Hans Dedecker [Fri, 1 Mar 2019 17:59:31 +0000 (18:59 +0100)]
busybox: add missing install dir

Add missing /usr/sbin install dir fixing :

install: cannot create regular file 'build_dir/target-x86_64_musl/busybox-1.30.1/.pkgdir/busybox/usr/sbin/ntpd-hotplug': No such file or directory

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit 2cd28c9a0836b82c591cccc3d9e01228b7990869)

5 years agokernel: bump 4.14 to 4.14.105
Koen Vandeputte [Wed, 6 Mar 2019 15:59:52 +0000 (16:59 +0100)]
kernel: bump 4.14 to 4.14.105

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.162
Koen Vandeputte [Wed, 6 Mar 2019 15:58:26 +0000 (16:58 +0100)]
kernel: bump 4.9 to 4.9.162

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agomt76: update to the latest version
Felix Fietkau [Thu, 7 Mar 2019 19:36:51 +0000 (20:36 +0100)]
mt76: update to the latest version

28d81ff mt76x0: eeprom: fix VHT mcs{8,9} rate power offset
6e33ce6 mt76: move mt76_mcu_msg_alloc in mt76-core
4637f95 mt76: move mt76_mcu_get_response in mt76-core
1763cb0 mt76: move mt76_mcu_rx_event in mt76-core
4db9d75 mt76x0: mcu: remove useless commented configuration
91d0455 mt76: move mt76_dma_tx_queue_skb_raw in mt76-core module
0e8e53f mt76: remove add_buf pointer in mt76_queue_ops
db47920 mt7603: rely on mt76_mcu_msg_alloc routine
471c447 mt7603: rely on mt76_mcu_get_response routine
cacc986 mt7603: rely on mt76_mcu_rx_event routine
11ab620 mt7603: rely on mt76_tx_queue_skb_raw common routine
82fa312 mt7603: move alloc_dev common code in mt76_alloc_device
47d5922 mt76: move alloc_device common code in mt76_alloc_device
c50c993 mt76x2u: remove mt76x2u_alloc_device routine
6ed5b7a mt76x0: remove mt76x0u_alloc_device routine
e32e249 mt76x2: remove mt76x2_alloc_device routine
6aacd1e mt76: change the return type of mt76_dma_attach()
a10e9e5 mt76x02u: use usb_bulk_msg to upload firmware
a774ff6 mt76: usb: fix possible NULL pointer dereference in mt76u_mcu_deinit
c2877bc mt76: usb: fix possible memory leak in mt76u_buf_free
a5cfe96 mt76: usb: do not run mt76u_queues_deinit twice
1e4db14 mt76: usb: move mt76u_check_sg in usb.c
302406b mt76: usb: do not use sg buffers for mcu messages
8ab5267 mt76: usb: use a linear buffer for tx/rx datapath if sg is not supported
a0a3505 mt76: usb: introduce disable_usb_sg parameter
0cee180 mt76: usb: use dev_err_ratelimited instead of dev_err in mt76u_complete_rx
1bb97c4 mt76x02u: remove bogus check and comment padding
2cbc2d4 mt76: Use the correct hweight8() function
f18e03a mt76x0u: fix suspend/resume
6231336 mt76: mt76x02: fix TSF sync mode
783da04 mt76: mt76x02: fix beacon timer drift adjustment
43d2507 mt76: mt76x02: fix beacon timer issue
59a6587 mt76: mt76x02: only reset beacon drift counter when enabling beacons
8c8eb98 mt76: mt76x02: issue watchdog reset on MCU request timeout
52161d2 mt76: mt76x02: fix ED/CCA enabling/disabling
5e7ecce mt76: mt76x2: unify mt76x2[u]_mac_resume
18af219 mt76: mt76x02: set MT_TXOP_HLDR_TX40M_BLK_EN for mt76x2
e5747b2 mt76usb: allow mt76u_bulk_msg be used for reads
2437a9a mt76usb: use synchronous msg for mcu command responses
e4250c9 mt76usb: remove usb_mcu.c
8b1110e mt76: usb: fix warning in mt76u_buf_free
89215f6 mt76: usb: introduce mt76u_fill_bulk_urb routine
523e374 mt76: usb: simplify rx buffer allocation
ffe1292 mt76: usb: simplify mt76u_tx_build_sg routine
e2a9d40 mt7603: fix ba window size selection
b040ef7 mt76: remove no longer used routine declarations
645ef43 mt76: usb: check urb->num_sgs limit in mt76u_process_rx_entry
fd315bd mt7603: disable dynamic sensitivity adjustment by default
3c6df9b mt76: rewrite dma descriptor base and ring size on queue reset
30e757e mt76: mt76x02: when setting a key, use PN from mac80211
fa83406 mt76: mt76x2: implement full device restart on watchdog reset
ead881b mt76: mt76x02: do not sync PN for keys with sw_iv set
ba1d989 mt76: mmio: move mt76x02_set_irq_mask in mt76 module
283ebbe mt76: dma: move mt76x02_init_{tx,rx}_queue in mt76 module
b216d3c mt76: introduce q->stopped parameter
8b437d2 mt76x02: clear sta and vif driver data structures on add
2c62d03 mt76x02: clear running flag when resetting state on restart
6b10cfc mt76: mt76x02: only update the base mac address if necessary
669bc49 mt76: mt76x02: reduce false positives in ED/CCA tx blocking
2ed9382 mt76: mt7603: fix tx status HT rate validation
d2c6823 mt76: mt76x2: fix external LNA gain settings
8ee2259 mt76: mt76x2: fix 2.4 GHz channel gain settings
8bfe6d4 mt76: mt7603: clear ps filtering mode before releasing buffered frames
d13b065 mt76: mt7603: fix up hardware queue index for PS filtered packets
eb1ecc4 mt76: mt7603: notify mac80211 about buffered frames in ps queue
3687eec mt76: mt7603: clear the service period on releasing PS filtered packets
42ab27e mt76: when releasing PS frames, end the service period if no frame was found
461f3b0 mt76: mt76x02: disable ED/CCA by default
1d7760d mt76: mt7603: set moredata flag when queueing ps-filtered packets
0b927b2 mt76: fix return value check in mt76_wmac_probe()
e72376d mt76x02: fix hdr pointer in write txwi for USB

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agomac80211: add a fix to prevent unsafe queue wake calls during restart
Felix Fietkau [Fri, 1 Mar 2019 13:54:31 +0000 (14:54 +0100)]
mac80211: add a fix to prevent unsafe queue wake calls during restart

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agomac80211: backport tx queue start/stop fix
Felix Fietkau [Fri, 1 Mar 2019 12:10:53 +0000 (13:10 +0100)]
mac80211: backport tx queue start/stop fix

Among other things, it fixes a race condition on calling ieee80211_restart_hw

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agokernel: bump 4.14 to 4.14.104
Koen Vandeputte [Wed, 27 Feb 2019 15:59:49 +0000 (16:59 +0100)]
kernel: bump 4.14 to 4.14.104

Refreshed all patches.

Altered patches:
- 332-arc-add-OWRTDTB-section.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.161
Koen Vandeputte [Wed, 27 Feb 2019 15:57:22 +0000 (16:57 +0100)]
kernel: bump 4.9 to 4.9.161

Refreshed all patches.

Altered patches:
- 332-arc-add-OWRTDTB-section.patch

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: fix refcnt leak in LED netdev trigger on interface rename
Rafał Miłecki [Wed, 6 Mar 2019 05:00:00 +0000 (06:00 +0100)]
kernel: fix refcnt leak in LED netdev trigger on interface rename

Renaming a netdev-trigger-tracked interface was resulting in an
unbalanced dev_hold().

Example:
> iw phy phy0 interface add foo type __ap
> echo netdev > trigger
> echo foo > device_name
> ip link set foo name bar
> iw dev bar del
[  237.355366] unregister_netdevice: waiting for bar to become free. Usage count = 1
[  247.435362] unregister_netdevice: waiting for bar to become free. Usage count = 1
[  257.545366] unregister_netdevice: waiting for bar to become free. Usage count = 1

Above problem was caused by trigger checking a dev->name which obviously
changes after renaming an interface. It meant missing all further events
including the NETDEV_UNREGISTER which is required for calling dev_put().

This change fixes that by:
1) Comparing device struct *address* for notification-filtering purposes
2) Dropping unneeded NETDEV_CHANGENAME code (no behavior change)

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agooxnas: add SoC restart driver for reboot
Daniel Golle [Sun, 3 Mar 2019 01:30:21 +0000 (02:30 +0100)]
oxnas: add SoC restart driver for reboot

Refresh oxnas kernel config while at it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(commit c1a8054114 "oxnas: add SoC restart driver for reboot" on master)

5 years agooxnas: cheery-pick DTS improvements from master
Daniel Golle [Sun, 3 Mar 2019 17:13:25 +0000 (18:13 +0100)]
oxnas: cheery-pick DTS improvements from master

 4a954e8620 oxnas: dts: Unify naming of gpio-keys nodes
 9292822023 oxnas: dts: Unify naming of gpio-led nodes
 994428f395 oxnas: add missing NAND partitions
 858aebc0ef oxnas: unify MTD partition names
 e2fea41ad6 oxnas: fix forgotten MTD partition name
 42f2e07ba0 oxnas: cloudengines,pogoplug*: enable USB ports

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
5 years agokernel: bump 4.14 to 4.14.103
Koen Vandeputte [Mon, 25 Feb 2019 10:24:37 +0000 (11:24 +0100)]
kernel: bump 4.14 to 4.14.103

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.160
Koen Vandeputte [Mon, 25 Feb 2019 10:24:12 +0000 (11:24 +0100)]
kernel: bump 4.9 to 4.9.160

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.14 to 4.14.102
Koen Vandeputte [Wed, 20 Feb 2019 14:44:46 +0000 (15:44 +0100)]
kernel: bump 4.14 to 4.14.102

Refreshed all patches.

Remove upstreamed:
- 272-uapi-if_ether.h-prevent-redefinition-of-struct-ethhd.patch

Remove upstreamed hunks:
- 105-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch

Fixes:
- CVE-2018-1000026

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.159
Koen Vandeputte [Wed, 20 Feb 2019 14:42:17 +0000 (15:42 +0100)]
kernel: bump 4.9 to 4.9.159

Refreshed all patches.

Remove upstreamed:
- 023-1-smsc95xx-Use-skb_cow_head-to-deal-with-cloned-skbs.patch
- 023-6-ch9200-use-skb_cow_head-to-deal-with-cloned-skbs.patch
- 023-7-kaweth-use-skb_cow_head-to-deal-with-cloned-skbs.patch
- 050-usb-dwc2-Remove-unnecessary-kfree.patch
- 092-netfilter-nf_tables-fix-mismatch-in-big-endian-syste.patch
- 272-uapi-if_ether.h-prevent-redefinition-of-struct-ethhd.patch

Fixes:
- CVE-2018-1000026

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agomac80211: brcmfmac: backport 5.0 & 5.1 important changes/fixes
Rafał Miłecki [Mon, 25 Feb 2019 09:15:35 +0000 (10:15 +0100)]
mac80211: brcmfmac: backport 5.0 & 5.1 important changes/fixes

This backports the most important brcmfmac commits that:
1) Fix some bugs
2) Help debugging bugs

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agodnsmasq: prefer localuse over resolvfile guesswork
Yousong Zhou [Wed, 20 Feb 2019 06:58:51 +0000 (06:58 +0000)]
dnsmasq: prefer localuse over resolvfile guesswork

This makes it clear that localuse when explicitly specified in the
config will have its final say on whether or not the initscript should
touch /etc/resolv.conf, no matter whatever the result of previous
guesswork would be

(cherry picked from c17a68cc61a0f8a28e19c7f60b24beaf1a1a402d)
Tested-by: Paul Oranje <por@oranjevos.nl>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
Acked-by: Paul Oranje <por@oranjevos.nl>
5 years agodnsmasq: allow using dnsmasq as the sole resolver
Yousong Zhou [Mon, 18 Feb 2019 14:11:19 +0000 (14:11 +0000)]
dnsmasq: allow using dnsmasq as the sole resolver

Currently it seems impossible to configure /etc/config/dhcp to achieve
the following use case

 - run dnsmasq with no-resolv
 - re-generate /etc/resolv.conf with "nameserver 127.0.0.1"

Before this change, we have to set resolvfile to /tmp/resolv.conf.auto
to achive the 2nd effect above, but setting resolvfile requires noresolv
being false.

A new boolean option "localuse" is added to indicate that we intend to
use dnsmasq as the local dns resolver.  It's false by default and to
align with old behaviour it will be true automatically if resolvfile is
set to /tmp/resolv.conf.auto

(cherry picked from 2aea1ada65f050d74a064e74466bbe4e8d)
Tested-by: Paul Oranje <por@oranjevos.nl>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
Acked-by: Paul Oranje <por@oranjevos.nl>
5 years agobuild: Accept BIN_DIR parameter for legacy-images
Sven Eckelmann [Mon, 11 Feb 2019 15:26:42 +0000 (16:26 +0100)]
build: Accept BIN_DIR parameter for legacy-images

BIN_DIR can be set to overwrite the output path for new images. This is an
advertised feature for the imagebuilder and is used by systems like
LibreMesh's chef.

The legacy images are build using a new sub-make which doesn't receive the
variable overwrites of the parent make process. As result, the BIN_DIR is
automatically defined to the default value from rules.mk. The images will
therefore not be placed in the output path which was selected by the user.

Providing BIN_DIR as an explicit variable override to the sub-make works
around this problem.

Fixes: 26c771452cd8 ("image.mk: add LegacyDevice wrapper to allow legacy image building code to be used for device profiles")
Reported-by: Paul Spooren <mail@aparcar.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
(cherry picked from commit 9a5a10eb6924efa519e1d9e27b61dc254876f9ec)

5 years agoar71xx: Fix 5 GHz MAC address for Archer C60 v2
Adrian Schmutzler [Sat, 26 Jan 2019 16:59:44 +0000 (17:59 +0100)]
ar71xx: Fix 5 GHz MAC address for Archer C60 v2

Looks like C60 v2 needs the MAC address to be calculated
manually, while the C60 v1 gets it correctly without manual
interference.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added id]
(cherry picked from commit 319c5d7c49503d1afbfb3164b18cf966e11fac6a)

5 years agokernel: bump 4.14 4.14.101
Koen Vandeputte [Fri, 15 Feb 2019 10:04:05 +0000 (11:04 +0100)]
kernel: bump 4.14 4.14.101

Refreshed all patches.

Fixes:
- CVE-2019-3819

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.158
Koen Vandeputte [Fri, 15 Feb 2019 10:02:17 +0000 (11:02 +0100)]
kernel: bump 4.9 to 4.9.158

Refreshed all patches.

Fixes:
- CVE-2019-3819

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.14 to 4.14.99
Koen Vandeputte [Wed, 13 Feb 2019 10:30:07 +0000 (11:30 +0100)]
kernel: bump 4.14 to 4.14.99

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.156
Koen Vandeputte [Wed, 13 Feb 2019 10:28:09 +0000 (11:28 +0100)]
kernel: bump 4.9 to 4.9.156

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agomt76: update to the latest version
Felix Fietkau [Sun, 3 Feb 2019 19:45:26 +0000 (20:45 +0100)]
mt76: update to the latest version

a9d4c0e mt76: mt76x2: avoid running DPD calibration if tx is blocked
4d7e13f mt76: explicitly disable energy detect cca during scan
e3c1aad mt76: run MAC work every 100ms
4e8766a mt76: clear CCA timer stats in mt76x02_edcca_init
e301f23 mt76: measure the time between mt76x02_edcca_check runs
74075ef mt76: increase ED/CCA tx block threshold

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agokernel: bump 4.14 to 4.14.98
Koen Vandeputte [Thu, 7 Feb 2019 10:06:27 +0000 (11:06 +0100)]
kernel: bump 4.14 to 4.14.98

Refreshed all patches.

Remove upstreamed:
- 100-arm-cns3xxx-fix-writing-to-wrong-PCI-registers-after.patch

Altered patches:
- 721-phy_packets.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.155
Koen Vandeputte [Thu, 7 Feb 2019 10:04:08 +0000 (11:04 +0100)]
kernel: bump 4.9 to 4.9.155

Refreshed all patches.

Remove upstreamed:
- 100-arm-cns3xxx-fix-writing-to-wrong-PCI-registers-after.patch

Altered patches:
- 721-phy_packets.patch

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agomac80211: brcmfmac: fix a possible NULL pointer dereference
Rafał Miłecki [Mon, 11 Feb 2019 10:25:54 +0000 (11:25 +0100)]
mac80211: brcmfmac: fix a possible NULL pointer dereference

This fixes a possible crash in the brcmf_fw_request_nvram_done():
[   31.687293] Backtrace:
[   31.689760] [<c004fb4c>] (__wake_up_common) from [<c004fc38>] (__wake_up_locked+0x1c/0x24)
[   31.698043]  r10:c6794000 r9:00000009 r8:00000001 r7:bf54dda0 r6:a0000013 r5:c78e7d38
[   31.705928]  r4:c78e7d3c r3:00000000
[   31.709528] [<c004fc1c>] (__wake_up_locked) from [<c00502a8>] (complete+0x3c/0x4c)
[   31.717148] [<c005026c>] (complete) from [<bf54590c>] (brcmf_fw_request_nvram_done+0x5c8/0x6a4 [brcmfmac])
[   31.726818]  r7:bf54dda0 r6:c6794000 r5:00001990 r4:c6782380
[   31.732544] [<bf545344>] (brcmf_fw_request_nvram_done [brcmfmac]) from [<c0204e40>] (request_firmware_work_func+0x38/0x60)
[   31.743607]  r10:00000008 r9:c6bdd700 r8:00000000 r7:c72c3cd8 r6:c67f4300 r5:c6bda300
[   31.751493]  r4:c67f4300
[   31.754046] [<c0204e08>] (request_firmware_work_func) from [<c0034458>] (process_one_work+0x1e0/0x318)
[   31.763365]  r4:c72c3cc0
[   31.765913] [<c0034278>] (process_one_work) from [<c0035234>] (worker_thread+0x2f4/0x448)
[   31.774107]  r10:00000008 r9:00000000 r8:c6bda314 r7:c72c3cd8 r6:c6bda300 r5:c6bda300
[   31.781993]  r4:c72c3cc0
[   31.784545] [<c0034f40>] (worker_thread) from [<c003984c>] (kthread+0x100/0x114)
[   31.791949]  r10:00000000 r9:00000000 r8:00000000 r7:c0034f40 r6:c72c3cc0 r5:00000000
[   31.799836]  r4:c735dc00 r3:c79ed540
[   31.803438] [<c003974c>] (kthread) from [<c00097d0>] (ret_from_fork+0x14/0x24)
[   31.810672]  r7:00000000 r6:00000000 r5:c003974c r4:c735dc00
[   31.816378] Code: e5b53004 e1a07001 e1a06002 e243000c (e5934000)
[   31.822487] ---[ end trace a0ffbb07a810d503 ]---

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 83bcacb5215c21e1894fbe3d651d83948479ce91)

5 years agoath9k: register GPIO chip for OF targets
Mathias Kresin [Fri, 7 Dec 2018 08:42:09 +0000 (09:42 +0100)]
ath9k: register GPIO chip for OF targets

This partitialy reverts commit f506de2cdaf9.

Registering the GPIO chip without a parent device completely breaks the
ath9k GPIOs for device tree targets.

As long as boards using the devicetree don't have the gpio-controller
property set for the ath9k node, the unloading of the driver works as
expected.

Register the GPIO chip with the ath9k device as parent only for OF
targets to find a trade-off between the needs of driver developers and
the broken LEDs and buttons seen by users.

Fixes: FS#2098
Signed-off-by: Mathias Kresin <dev@kresin.me>
(cherry picked from commit d35f2a5565fc51fb277f72a8565c871ce1785588)

5 years agonetifd: handle hotplug event socket errors
Hans Dedecker [Sat, 2 Feb 2019 19:43:09 +0000 (20:43 +0100)]
netifd: handle hotplug event socket errors

a2aba5c system-linux: handle hotplug event socket ENOBUFS errors

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agobrcm63xx: HG655b: fix the imagetag at dts
Daniel Gonzalez Cabanelas [Sun, 9 Dec 2018 20:29:48 +0000 (21:29 +0100)]
brcm63xx: HG655b: fix the imagetag at dts

Fix the imagetag on the HG655b to allow a correct partition detection at boot time.

It turns out that it was defined at the wrong partition. Just move the imagetag to
the linux firmware partition.

The bug is present since the 18.06 release. Without this fix, the board won't boot.

Fixes: a27d59bb4274 ("brcm63xx: switch to new partition layout specification")
Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
(cherry picked from commit 26d4cb2ca7acde1254f6ce6c0a54e0aca1489a0f)

5 years agokernel: bump 4.14 to 4.14.97
Koen Vandeputte [Thu, 31 Jan 2019 15:38:20 +0000 (16:38 +0100)]
kernel: bump 4.14 to 4.14.97

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.154
Koen Vandeputte [Thu, 31 Jan 2019 15:36:37 +0000 (16:36 +0100)]
kernel: bump 4.9 to 4.9.154

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agomt76: update to the latest version
Felix Fietkau [Thu, 31 Jan 2019 22:17:49 +0000 (23:17 +0100)]
mt76: update to the latest version

a4ec45c mt7603: fix LED support (copy CFLAGS from main Makefile)
edda5c5 mt76x02: use mask for vifs
dd52191 mt76x02: use commmon add interface for mt76x2u
a80acaf mt76x02: initialize mutli bss mode when set up address
38e832d mt76x02: minor beaconing init changes
171adaf mt76x02: init beacon config for mt76x2u
dcab682 mt76: beaconing fixes for USB
ff81de1 mt76x02: enable support for IBSS and MESH
8027b5d mt7603: remove copyright headers
e747e80 mt76: fix software encryption issues
2afa0d7 mt7603: remove WCID override for software encrypted frames

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agokernel: bump 4.14 to 4.14.96
Koen Vandeputte [Mon, 28 Jan 2019 09:49:44 +0000 (10:49 +0100)]
kernel: bump 4.14 to 4.14.96

Refreshed all patches.

New symbol added:
- CONFIG_CIFS_ALLOW_INSECURE_LEGACY

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.153
Koen Vandeputte [Mon, 28 Jan 2019 09:48:09 +0000 (10:48 +0100)]
kernel: bump 4.9 to 4.9.153

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agomt76: update to the latest version
Felix Fietkau [Wed, 30 Jan 2019 14:17:01 +0000 (15:17 +0100)]
mt76: update to the latest version

c3da1aa mt7603: trigger beacon stuck detection faster
7a53138 mt7603: trigger watchdog reset if flushing CAB queue fails
6eef33b mt7603: remove mt7603_txq_init
ae30c30 mt76: add driver callback for when a sta is associated
0db925f mt7603: update HT/VHT capabilities after assoc
b5ac8e4 mt7603: initialize LED callbacks only if CONFIG_MT76_LEDS is set
c989bac mt76x0: eeprom: fix chan_vs_power map in mt76x0_get_power_info
24bd2c0 mt76x0: phy: report target_power in debugfs
bc7ce2a mt76x0: init: introduce mt76x0_init_txpower routine

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agoOpenWrt v18.06.2: revert to branch defaults
Jo-Philipp Wich [Wed, 30 Jan 2019 12:34:55 +0000 (13:34 +0100)]
OpenWrt v18.06.2: revert to branch defaults

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
5 years agoOpenWrt v18.06.2: adjust config defaults
Jo-Philipp Wich [Wed, 30 Jan 2019 12:34:49 +0000 (13:34 +0100)]
OpenWrt v18.06.2: adjust config defaults

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
5 years agobase-files: config_get: prevent filename globbing
Günther Kelleter [Mon, 8 Oct 2018 13:30:00 +0000 (15:30 +0200)]
base-files: config_get: prevent filename globbing

When config_get is called as "config_get section option" the option
is unexpectedly globbed by the shell which differs from the way options
are read to a variable with "config_get variable section option".
Add another layer of double quotes to fix it.

Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
(backported from commit c3389ab135400fba0cb710d9c6c63df2f563d9d9)

5 years agodnsmasq: backport missing braces fix
Jo-Philipp Wich [Wed, 30 Jan 2019 12:01:24 +0000 (13:01 +0100)]
dnsmasq: backport missing braces fix

Fold upstream fix d2d4990
("Fix missing braces in 8eac67c0a15b673c8d27002c248651b308093e4") into
the already existing static lease fix patch.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
5 years agobuild: fix umask detection bashism
Thorsten Glaser [Mon, 22 Oct 2018 17:28:50 +0000 (19:28 +0200)]
build: fix umask detection bashism

the leading 0 is optional and not emitted by some shells

Signed-off-by: Thorsten Glaser <tg@mirbsd.org>
(cherry picked from commit da5bee5345ce8f66eb36b8993b87b684e5cce614)

5 years agobuild: fix STAGING_DIR cleaning for packages
Jeffery To [Wed, 12 Dec 2018 17:33:36 +0000 (01:33 +0800)]
build: fix STAGING_DIR cleaning for packages

This fixes two issues with cleaning package files from STAGING_DIR:

* CleanStaging currently can only remove files and not directories. This
  changes CleanStaging to use clean-package.sh, which does remove
  directories.

* Because of the way directories are ordered in the staging files list,
  clean-package.sh currently tries (and fails) to remove parent
  directories before removing subdirectories. This changes
  clean-package.sh to process the staging files list in reverse, so that
  subdirectories are removed first.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>
(cherry picked from commit a1170936798e519776de605d6986ccb72f04cb06)