Zoltan HERPAI [Wed, 25 Oct 2023 10:15:12 +0000 (12:15 +0200)]
ath79: image: use sysupgrade-tar for SR71 / PB42
As the combined-image stanza is now retired, use sysupgrade-tar
for the sysupgrade images.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Mon, 21 Dec 2020 22:39:51 +0000 (23:39 +0100)]
ath79: add support for Ubiquiti LiteStation SR71
Specifications:
SoC: AR7130
DRAM: 32Mb DDR1
Flash: 16Mb SPI-NOR
LAN: 2x 10/100Mbps via ADM6996 switch on MII
(1 with PoE)
PCI: 1x mini-PCI
UART: standard UART header
JTAG: yes
LEDs: 8x LEDs
Installation instructions:
The original FIS partitioning does not provide enough
space for the kernel, so the installation must start
with re-partitioning the flash from RedBoot.
The MAC address is stored in the "boardconfig" partition, which is
automatically created.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Mon, 26 Aug 2019 14:37:31 +0000 (16:37 +0200)]
sh775x: add new target to support SH7751R-based (SH4) boards
If SH4 hardware is not available for testing, the generated kernel and
rootfs can happily start up in qemu:
qemu-system-sh4 -M r2d -nographic -no-reboot -kernel openwrt-sh775x-zImage \
-append "console=ttySC1 noiotrap root=/dev/sda" -monitor null -serial null \
-serial stdio -drive file=openwrt-sh775x-rootfs-ext4.img,format=raw
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Tue, 24 Oct 2023 20:49:58 +0000 (22:49 +0200)]
musl: sh4: add missing bits/reg.h
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Fri, 1 Apr 2022 08:35:56 +0000 (10:35 +0200)]
generic: add missing symbols for SH4
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Sun, 30 Jan 2022 12:47:12 +0000 (13:47 +0100)]
gcc: add multilib m4/m4-nofpu config for sh4
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Wed, 9 Aug 2023 11:06:17 +0000 (13:06 +0200)]
util-linux: test_enosys: add support for SH
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Tue, 24 Oct 2023 16:41:39 +0000 (18:41 +0200)]
modules: block: add mpt3sas support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Tue, 24 Oct 2023 16:41:02 +0000 (18:41 +0200)]
modules: block: libraid/libsas can build on non-x86 targets
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Tue, 24 Oct 2023 16:40:24 +0000 (18:40 +0200)]
modules: block: add libraid module
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Sun, 29 Oct 2023 17:56:14 +0000 (18:56 +0100)]
sunxi: include the OV5640 dtsi in the BananaPi P2 Zero board
root@OpenWrt:/# v4l2-ctl -D
Driver Info:
Driver name : sun6i-csi
Card type : sun6i-csi
Bus info : platform:
1cb0000.camera
Driver version : 6.1.55
Capabilities : 0x84200001
Video Capture
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04200001
Video Capture
Streaming
Extended Pix Format
Media Driver Info:
Driver name : sun6i-csi
Model : Allwinner A31 CSI Device
Serial :
Bus info : platform:
1cb0000.camera
Media version : 6.1.55
Hardware revision: 0x00000000 (0)
Driver version : 6.1.55
Interface Info:
ID : 0x03000003
Type : V4L Video
Entity Info:
ID : 0x00000001 (1)
Name : sun6i-csi
Function : V4L2 I/O
Pad 0x01000002 : 0: Sink, Must Connect
Link 0x02000007: from remote pad 0x1000006 of entity 'ov5640 2-003c' (Camera Sensor): Data, Enabled, Immutable
-------------
root@OpenWrt:/# media-ctl /dev/video0 --print-topology
Media controller API version 6.1.55
Media device information
------------------------
driver sun6i-csi
model Allwinner A31 CSI Device
serial
bus info platform:
1cb0000.camera
hw revision 0x0
driver version 6.1.55
Device topology
- entity 1: sun6i-csi (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video0
pad0: Sink
<- "ov5640 2-003c":0 [ENABLED,IMMUTABLE]
- entity 5: ov5640 2-003c (1 pad, 1 link)
type V4L2 subdev subtype Sensor flags 0
device node name /dev/v4l-subdev0
pad0: Source
[fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range
crop.bounds:(0,0)/2624x1964
crop:(0,4)/2624x1944]
-> "sun6i-csi":0 [ENABLED,IMMUTABLE]
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Sun, 29 Oct 2023 17:55:22 +0000 (18:55 +0100)]
sunxi: add OV5640 dtsi camera module for H2/H3 SoCs
Create a dtsi with an OV5640 camera definition that can be used
as an include in H2/H3 boards.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Sat, 28 Oct 2023 18:35:57 +0000 (20:35 +0200)]
modules: video: extend with CSI plaform and sensor modules
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Sat, 28 Oct 2023 16:52:30 +0000 (18:52 +0200)]
sunxi: add missing symbol as prep for camera/CSI support
Disable VIDEO_SUN8I_A83T_MIPI_CSI2.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Fri, 27 Oct 2023 16:23:57 +0000 (18:23 +0200)]
sunxi: add support for Lichee Pi Zero (V3s) board
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Mon, 26 Aug 2019 08:18:39 +0000 (10:18 +0200)]
sunxi: add support for Merrii A80 (Optimus) devboard
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Wed, 13 Mar 2019 23:24:50 +0000 (00:24 +0100)]
suniv: add new target
This is Allwinner's ARM926EJ-S core, which is one of its early
products, reappearing in recent compact designs. The SoC includes
32/64Mb memory in the same package, and has display and USB interfaces,
allowing for small footprint boards.
The target consists of basic 6.1 support, with u-boot.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Thu, 5 May 2022 06:47:27 +0000 (08:47 +0200)]
kirkwood: add support for Netgear Stora (MS2000/2110) NAS
Dual-slot NAS based on Marvell Kirkwood.
Specifications:
- Marvell
88F6281 @1GHz
- 128Mb RAM
- 256Mb NAND
- 1x GbE LAN (Marvell
88E1116)
- 1x USB 2.0
- 2x SATA
- PCF8563 RTC
- LM75 sensor
- TC654 PWM fan controller
- Serial on J2 (115200,8n1)
- Newer bootROM so kwboot-ing via serial is possible
Installation:
1. Serial console
- Connect your levelshifter to the serial console
on J2 (refer to the wiki page for pinout)
2. Update u-boot
- Download the u-boot.kwb image for the device
- Powercycle the NAS
- Run "kwboot -b ./u-boot.kwb /dev/ttyUSB0 -p"
- Connect to the serial console with minicom
- tftp 0x0800000 netgear_stora-u-boot.kwb
- nand erase 0x0 100000
- nand write 0x0800000 0x0 0x100000
- reset
3. Install OpenWrt
- Boot up the initramfs image
- tftpboot 0x800000 openwrt-kirkwood-netgear_stora-initramfs-uImage; bootm 0x800000
- Download the sysupgrade image and perform sysupgrade
The fan is controlled in 3 stages by a script running every minute
from cron, measuring the CPU temperature.
Snippets taken from bodhi <mibodhi@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Thu, 16 Jul 2020 15:46:44 +0000 (17:46 +0200)]
kirkwood: add hwmon-tc654
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Sat, 12 Aug 2023 21:57:31 +0000 (23:57 +0200)]
ath79: DO NOT MERGE: add a custom WR741N v1/v2 8Mb variant
Device is a WR741N v2.4 (AR7240) with the flash replaced with
an 8Mb chip. ART partition is moved to the end (0x7f0000). Also,
the commit adds the 741-related code back to the generic board.d
files.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Tue, 8 Jun 2021 11:37:34 +0000 (13:37 +0200)]
ath79: add label to flash in the TP-Link dtsi
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Sat, 27 Aug 2022 15:08:32 +0000 (17:08 +0200)]
ath79: add support for Atheros PB42 reference board
Specifications:
SoC: AR7130
DRAM: 32Mb DDR1
Flash: 8Mb SPI-NOR
LAN: 4x 10/100Mbps via ADM6996 switch on MII
WAN: 1x 10/100Mbps via RMII
PCI: 2x mini-PCI
UART: standard QCA UART header
JTAG: yes
Button: 1x WPS, 1x reset
LEDs: 8x LEDs
Installation instructions:
The original FIS partitioning does not provide enough
space for the kernel, so the installation must start
with re-partitioning the flash from RedBoot.
The suggested partition table is the following:
RedBoot 0xBF000000 0xBF000000 0x00040000 0x00000000
kernel 0xBF040000 0x80060000 0x001F0000 0x80060000
rootfs 0xBF230000 0x00000000 0x005B0000 0x00000000
FIS directory 0xBF7E0000 0xBF7E0000 0x0000F000 0x00000000
RedBoot config 0xBF7EF000 0xBF7EF000 0x00001000 0x00000000
Which can be created with:
fis init
fis create -r 0x80060000 -e 0x80060000 -b 0xbf040000 -l 0x220000 kernel
fis create -b 0xbf260000 -l 0x580000 rootfs
The kernel and the rootfs must then be loaded from TFTP:
load -r -v -b 0x80060000 openwrt-ath79-generic-atheros_pb42-squashfs-kernel.bin
fis create kernel
load -r -v -b 0x80100000 openwrt-ath79-generic-atheros_pb42-squashfs-rootfs.bin
fis create rootfs
Once OpenWrt is installed, the normal sysupgrade method will work for
upgrades.
The MAC address is stored in the "boardconfig" partition, which is
automatically created.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Mon, 26 Aug 2019 15:04:33 +0000 (17:04 +0200)]
shmin: add new SH3-target
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Rosen Penev [Fri, 10 Nov 2023 22:55:43 +0000 (14:55 -0800)]
ath79: qca: remove mac-address-increment
nvmem-layout allows removal
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Thu, 9 Nov 2023 23:18:44 +0000 (15:18 -0800)]
ath79: qca: convert to nvmem-layout
Allows replacing mac-address-increment with mac-base.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 11 Nov 2023 00:21:29 +0000 (16:21 -0800)]
ath79: mikrotik: fix dts warnings
property has invalid length
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 8 Nov 2023 03:39:00 +0000 (19:39 -0800)]
ramips: mt7621: nix mac-address-increment
nvmem-layout allows removal
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Tue, 7 Nov 2023 23:55:58 +0000 (15:55 -0800)]
ramips: mt7621: convert to nvmem-layout
Allows replacing mac-address-increment with mac-base.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 8 Nov 2023 03:25:58 +0000 (19:25 -0800)]
ramips: mt7621: add interrupt-controller
Fixes dtc warning:
'#interrupt-cells' found, but node is not an interrupt provider
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 25 Nov 2023 21:35:04 +0000 (13:35 -0800)]
ramips: mt7620a: use mac-base
mac-address-increment is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 25 Nov 2023 21:20:44 +0000 (13:20 -0800)]
ramips: mt7620a: convert to nvmem-layout
Allows using mac-base to replace mac-address-increment.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 25 Nov 2023 20:32:55 +0000 (12:32 -0800)]
ramips: mt7620n: convert to nvmem-layout
nvmem-cells is deprecated. nvmem-layout allows using mac-base.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Fri, 24 Nov 2023 02:59:35 +0000 (18:59 -0800)]
ramips: mt7628: use mac-base
mac-address-increment is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Fri, 24 Nov 2023 02:31:55 +0000 (18:31 -0800)]
ramips: mt7628: use nvmem-layout
Will allow using mac-base.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 25 Nov 2023 22:11:08 +0000 (14:11 -0800)]
mediatek: use mac-base
mac-address-increment is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 25 Nov 2023 22:03:10 +0000 (14:03 -0800)]
mediatek: convert to nvmem-layout
Will allow removing mac-address-increment.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Fri, 24 Nov 2023 01:40:09 +0000 (17:40 -0800)]
ramips: rtxxxx: remove mac-address-increment
Deprecated and replaced upstream with mac-base.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 22 Nov 2023 23:48:24 +0000 (15:48 -0800)]
ramips: rtxxxx: convert to nvmem-layout
Allows replacing mac-adress-increment.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Chukun Pan [Mon, 6 Nov 2023 15:06:05 +0000 (23:06 +0800)]
mediatek: filogic: reorder alphabetically
Reorder scripts and image recipes to keep alphabetical order.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Chukun Pan [Sun, 5 Nov 2023 15:02:09 +0000 (23:02 +0800)]
uboot-envtools: filogic: reorder alphabetically
Reorder scripts to keep alphabetical order.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Chukun Pan [Fri, 17 Nov 2023 15:27:03 +0000 (23:27 +0800)]
mediatek: filogic: remove kmod-usb2 for GL-MT6000
The usb driver requires kmod-usb3, not kmod-usb2.
Remove the useless kmod-usb2 from default package.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Chukun Pan [Sat, 4 Nov 2023 15:50:20 +0000 (23:50 +0800)]
mediatek: Cetron CT3003: fixes typo for spi properties
Same as commit
3674689, correct 'buswidth' to 'bus-width'.
Also move the nmbm properties outside the partition definition.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Rosen Penev [Mon, 13 Nov 2023 19:47:17 +0000 (11:47 -0800)]
ipq40xx: remove mac-address-increment
nvmem-layout allows removal
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 13 Nov 2023 19:23:12 +0000 (11:23 -0800)]
ipq40xx: convert to nvmem-layout
Allows replacing mac-address-increment with mac-base.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 13 Nov 2023 20:02:38 +0000 (12:02 -0800)]
ipq40xx: fix dtc warnimg
I2C bus unit address format error, expected "62"
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 13 Nov 2023 20:20:51 +0000 (12:20 -0800)]
qualcommax: convert to nvmem-layout
nvmem-cells is deprecated
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 13 Nov 2023 20:23:07 +0000 (12:23 -0800)]
apm821xx: convert to nvmem-layout
nvmem-cells is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Hauke Mehrtens [Sat, 25 Nov 2023 17:06:41 +0000 (18:06 +0100)]
mediatek: filogic: Fix GPIOs for Zbtlink ZBT-Z8102AX
The PGIO configuration should be added for the ZBT-Z8102AX and not the ZBT-Z8103AX
Fixes: c8c2f522625c ("mediatek: add support for Zbtlink ZBT-Z8102AX")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Xiaobo Liu [Tue, 14 Nov 2023 03:07:56 +0000 (11:07 +0800)]
ramips: mt76x8 add support for RTC class/drivers
This commit adds support for RTC class/drivers to the mt76x8 target.
Signed-off-by: Xiaobo Liu <cppcoffee@gmail.com>
Rosen Penev [Sat, 7 Oct 2023 04:55:01 +0000 (21:55 -0700)]
f2fs-tools: avoid dead symlinks in root
When building on the host, this avoids creating dead symlinks. Matches
what is done elsewhere.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Darlan Pedro de Campos [Fri, 24 Nov 2023 00:31:05 +0000 (19:31 -0500)]
ramips: add support for TP-Link EX220 v1
This device is very similar, if not identical, to the TP-Link AX23 v1
but is targeted at service providers and features a completely different
flash layout.
Hardware
--------
CPU: MediaTek MT7621 DAT
RAM: 128MB DDR3 (integrated)
FLASH: 16MB SPI-NOR
WiFi: MediaTek MT7905 + MT7975 (2.4 / 5 DBDC) 802.11ax
SERIAL: 115200 8N1
LEDs - (3V3 - GND - RX - TX) - ETH ports
Installation
------------
Flashing is only possible via a serial connection using the sysupgrade
image; the factory image must be signed. You can flash the sysupgrade
image directly through the U-Boot console, or preferably, by booting the
initramfs image and flashing with the sysupgrade command. Follow these
steps for sysupgrade flashing:
1. Establish a UART serial connection.
2. Set up a TFTP server at 192.168.0.2 and copy the initramfs image
there.
3. Power on the device and press any key to interrupt normal boot.
4. Load the initramfs image using tftpboot.
5. Boot with bootm.
6. If you haven't done so already, back up all stock mtd partitions.
7. Copy the sysupgrade image to the router.
8. Flash OpenWrt through either LuCI or the sysupgrade command. Remember
not to attempt saving settings.
Revert to stock firmware
------------------------
Flash stock firmware via OEM web-recovery mode. If you don't have access
to the stock firmware image, you will need to restore the firmware
partition backed up earlier.
Web-Recovery
------------
The router supports an HTTP recovery mode:
1. Turn off the router.
2. Press the reset button and power on the device.
3. When all LEDs start flashing, release reset and quickly press it
again.
The interface is reachable at 192.168.0.1 and supports installation of
the OEM factory image. Note that flashing OpenWrt this way is not
possible, as mentioned above.
Signed-off-by: Darlan Pedro de Campos <darlanpedro@gmail.com>
Michael Trinidad [Wed, 22 Nov 2023 02:46:27 +0000 (21:46 -0500)]
mwlwifi: update to version 10.4.10-
20231120
Upstream PR 416 improvements:
-AMPDU Optimization of priority calculation. (8864/8897)
-8864/8897 fix wpa3
-Add cypher suite to driver capabilities (all chip)
-Alignment of pcie_tx_ctrl* (all chip)
-"feature" normalization for all chips (all chip)
-Add modprobe parameters (all chip)
-fix monitoring (all chip)
-Code separation by chipset (8864/8897 <=> 8997)
-dump_prob decommissioning (8864/8897/8997)
-fix amsdu high ping latency (8864/8897/8997)
-drop debug info in hostcmd_get_hw_spec() (8864/8897)
-Add wcb_base in debug info (8864)
-Rewrite AMSDU packets (8864/8897/8997)
-debug rewrite output mwl_debugfs_sta_read (all chip)
-Improved encryption interoperability (8864/8897/8997)
-factorization encrypted packet test (8864/8897/8997)
-Change 88W8864 firmware to 7.2.9.27 (8864/8897)
-Fix the AMPDU session lifecycle (8864/8897/8997)
-Remove the tx done packets mechanism (8864/8897)
Signed-off-by: Michael Trinidad <trinidude4@hotmail.com>
Filip Milivojevic [Sat, 11 Nov 2023 09:57:32 +0000 (10:57 +0100)]
ramips: Add support for Cudy WR1300 v3
Specifications:
- SoC: MediaTek MT7621AT
- RAM: 128 MB (DDR3)
- Flash: 16 MB (SPI NOR)
- WiFi: MediaTek MT7603E, MediaTek MT7613BE
- Switch: 1 WAN, 4 LAN (Gigabit)
- Buttons: Reset, WPS
- LEDs: System, Wan, Lan 1-4, WiFi 2.4G, WiFi 5G, WPS
- Power: DC 12V 1A tip positive
Download and flash the manufacturer's built OpenWRT image available at
http://www.cudytech.com/openwrt_software_download
Install the new OpenWRT image via luci (System -> Backup/Flash firmware)
Be sure to NOT keep settings. The force upgrade may need to be checked
due to differences in router naming conventions.
Cudy WR1300 v3 differs from v2 only in swapped WiFi chip PCIe slots. Common
nodes are extracted to .dtsi and new v2 and v3 dts are created.
Cudy WR1300 v2 dts now contains ieee80211-freq-limit and has
eeprom_factory_8000 length fixed.
The same manufacturer's built OpenWRT image is provided for both v2 and v3
devices as a step in installing, but for proper WiFi functionality,
a separate build is required.
Recovery:
- Loads only signed manufacture firmware due to bootloader RSA verification
- serve tftp-recovery image as /recovery.bin on 192.168.1.88/24
- connect to any lan ethernet port
- power on the device while holding the reset button
- wait at least 8 seconds before releasing reset button for image to
download
- See http://www.cudytech.com/newsinfo/547425.html
Signed-off-by: Filip Milivojevic <zekica@gmail.com>
Nicolò Veronese [Thu, 2 Nov 2023 18:53:08 +0000 (19:53 +0100)]
uboot-envtools: add support for Zyxel EX5601-T0 ubootmod
The ubootmod bootlaoder for EX5601-T0 uses two partitions
in ubi to store enviroment variables. so proper config
is needed.
Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
Valerio 'ftp21' Mancini [Wed, 4 Oct 2023 09:43:25 +0000 (11:43 +0200)]
mediatek: add Zyxel EX5601-T0 with uboot custom partition
The flash procedure is similar to the Xiaomi AX6000 router.
Load openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-initramfs-recovery.itb from original Zyxel U-Boot:
tftpboot openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-initramfs-recovery.itb
bootm 0x46000000
Load mtd-rw
insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1
Format ubi and create ubootenv partitions
ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
Copy openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-initramfs-recovery.itb to /tmp and create recovery partition.
If your recovery image is larger than 10MiB, size the recovery partition accordingly to make it fit.
ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB
ubiupdatevol /dev/ubi0_2 openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-initramfs-recovery.itb
Copy preloader and uboot to /tmp and write them in the mtd
mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-preloader.bin bl2
mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-bl31-uboot.fip fip
Now write the firmware:
sysupgrade -n /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-squashfs-sysupgrade.itb
To create a correct BL2, I had to add a profile for 'spim:4k+256' as I could not find a way to value the variable 'NAND_TYPE'.
Features and fixes from hitech95 tree has been squashed, I'm attaching his commit message:
The Power LED was not working correctly and not reacting
to the boot process and statuses.
The board has space (footprint) for an unpopulated Zigbee chip,
while we dont know the device model having this chip populated
we have to assure that the common dts doesnt enable
interfaces that share pins with such device.
In this instance the PCIe and the uart1 and uart2 are disabled.
Some of the control PCIE pins seems to be used for the Zigbee chip,
UART1 seems to be used as a flash port while UART2 should be the
main comunication interface of Zigbee chip.
The Zigbee chip should be a EFR32MG21. But the pins used for UART
seems to be not on standard PINS used by other adapters.
So it cannot run firmwares shared on the web.
But it should be possible to build a custom firmware with
the corrtect pinmux.
This commit also contains the following squashed commit from hitech95
- mediatek: fix sysupgrade for Zyxel EX7601-T0 ubootmod
Changes and fixes added in common board:
- added aliases for boot status leds.
- added aliases for the mac-label-device.
- added pin claims for core features (MDIO and UART 0)
- added default LEDs configuration (01_leds)
- added default network configuration (02_network)
- added missing kmod-usb3 module for USB3
- fixed LED names
- fixed reset pin for SLIC chip
- removed unused pinmux configurations and devices
- fix LAN (switch) port numbering
- using nvmem cells for wifi eeprom, dropping deprecated "mediatek,mtd-eeprom"
- proper factory partition and mac address handling
- cleaned up spi_nand sections and partition
Changes and fixxes added in stock layout:
- added NMBM, if u-boot has it, the kernel must be informed.
Co-authored-by: Nicolò Veronese <nicveronese@gmail.com>
Co-developed-by: Nicolò Veronese <nicveronese@gmail.com>
Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
Valerio 'ftp21' Mancini [Sat, 26 Aug 2023 22:01:58 +0000 (00:01 +0200)]
uboot-mediatek: add initial Zyxel EX5601-T0 support
Flash procedure is described in next commit.
TLDR:
Copy preloader and uboot to /tmp and write them in the mtd.
This will also require new UBI partition and
volumes to boot openwrt.
mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-preloader.bin bl2
mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-bl31-uboot.fip fip
Changelist:
- Added profile for 4k+256 SPI NAND_TYPE
- Added basic Zyxel EX5601-T0 uboot profile
Backported from hitech95 branch:
- Button RESET pin fix
- Button WPS pin fix
Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
Daniel Golle [Sat, 25 Nov 2023 03:20:50 +0000 (03:20 +0000)]
mediatek: remove DTS property added by mistake
Remove bogus 'phy-handle = <&phy0>;', an undefined reference.
Fixes: c8c2f52262 ("mediatek: add support for Zbtlink ZBT-Z8102AX")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Mikhail Zhilkin [Sun, 12 Nov 2023 07:58:26 +0000 (07:58 +0000)]
ramips: add support for Sercomm CPJ routers
This commit adds support for following wireless routers:
- Rostelecom RT-FL-1 (Serсomm RT-FL-1)
- Rostelecom S1010 (Serсomm S1010.RT)
The devices are almost identical and the only difference is one bit in the
factory image PID (thanks to Maximilian Weinmann <x1@disroot.org>
(@MaxS0niX) for the info and idea to make one PR for two devices at once).
Devices specification
---------------------
SoC: MediaTek MT7620A, MIPS
RAM: 64 MB
Flash: 16 MB SPI NOR
Wireless 2.4: MT7620 (b/g/n, 2x2)
Wireless 5: MT7612EN (a/n/ac, 2x2)
Ethernet: 5xFE (WAN, LAN1-4)
BootLoader: U-Boot
Buttons: 2 (wps, reset)
LEDs: 1 amber and 1 green status GPIO leds
5 green ethernet GPIO leds
1 green GPIO 2.4 GHz WLAN led
1 green PHY 5 GHz WLAN led
1 green unmanaged power led
USB ports: No
Power: 12 VDC, 1 A
Connector: Barrel
OEM easy installation
---------------------
1. Remove all dots from the factory image filename (except the dot
before file extension)
2. Upload and update the firmware via the original web interface
3. Wait until green status led stops blinking (can take several minutes)
4. Login to OpenWrt initramsfs. It's recommended to make a backup of the
mtd partitions at this point.
4. Perform sysupgrade using the following command (or use Luci):
sysupgrade -n sysupgrade.bin
5. Wait until green status les stops blinking (can take several minutes)
6. Mission acomplished
Return to Stock
---------------
Option 1. Restore firmware Slot1 from a backup (firmware2.bin):
cd /tmp
mtd -e Firmware2 write firmware2.bin Firmware2
printf 1 | dd bs=1 seek=$((0x18007)) count=1 of=/dev/mtdblock2
reboot
Option 2. Decrypt, ungzip and split stock firmware image into the parts,
take Slot1 parts (kernel2.bin, rootfs2.bin) and write them:
cd /tmp
mtd -e Kernel2 write kernel2.bin Kernel2
mtd -e RootFS2 write rootfs2.bin RootFS2
printf 1 | dd bs=1 seek=$((0x18007)) count=1 of=/dev/mtdblock2
reboot
More about stock firmware decryption:
Link: https://github.com/Psychotropos/sercomm_fwutils/
Debricking
----------
Use sercomm-recovery tool. You can use "ALL" mtd partition backup as a
recovery image.
Link: https://github.com/danitool/sercomm-recovery
MAC addresses
-------------
+---------+-------------------+-----------+
| | MAC | Algorithm |
+---------+-------------------+-----------+
| label | 48:3e:xx:xx:xx:1e | label |
| LAN | 48:3e:xx:xx:xx:1e | label |
| WAN | 48:3e:xx:xx:xx:28 | label+10 |
| WLAN 2g | 48:3e:xx:xx:xx:20 | label+2 |
| WLAN 5g | 48:3e:xx:xx:xx:24 | label+6 |
+---------+-------------------+-----------+
Co-authored-by: Vadzim Vabishchevich <bestmc2009@gmail.com>
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Mikhail Zhilkin [Sun, 12 Nov 2023 07:56:08 +0000 (07:56 +0000)]
ramips: mt7620: drop unnecessary trailing tabs
Let's tidy up a bit (drop unnecessary trailing tabs).
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Mikhail Zhilkin [Sun, 12 Nov 2023 07:52:45 +0000 (07:52 +0000)]
ramips: sercomm.mk: make common recipe to set a bit in pid
This commit makes a common recipe to set bit in Sercomm factory pid since
this is necessary for several devices (WiFire S1500.nbn, Rostelecom
RT-FL-1) at different offsets.
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Mikhail Zhilkin [Sun, 12 Nov 2023 07:46:11 +0000 (07:46 +0000)]
scripts: sercomm-pid.py: use uppercase hwid in pid
Sercomm uses uppercase for hexadecimal representation of the device
hardware IDs in factory image PID. This commit brings the sercomm-pid.py
script into compliance with the original Sercomm algorithm.
Example
-------
+--------+-------------+-----------+-------------+
| Device | PID (before | PID | PID (after |
| HWID | the commit) | (Sercomm) | the commit) |
+--------+-------------+-----------+-------------+
| CPJ | 43 50 4a | 43 50 4A | 43 50 4A |
+--------+-------------+-----------+-------------+
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Jitao Lu [Tue, 21 Nov 2023 14:46:11 +0000 (22:46 +0800)]
linux-firmware: intel: add firmware for AX101
iwlwifi from 6.5 supports API version up to 83, but 81 is the latest one
available from linux-firmware
20230804.
Signed-off-by: Jitao Lu <dianlujitao@gmail.com>
Robert Marko [Fri, 24 Nov 2023 17:42:55 +0000 (18:42 +0100)]
ipq40xx: refresh patches
CI reported that ipq40xx needed a refresh, so lets refresh it.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Daniel Golle [Mon, 20 Nov 2023 20:23:42 +0000 (20:23 +0000)]
mediatek: add support for Zbtlink ZBT-Z8102AX
Specifications:
SoC: MediaTek MT7981B
RAM: 1024MiB
Flash: SPI-NAND 128 MiB
Switch: 1 WAN, 4 LAN (Gigabit)
USB: two M.2 slots for 5G modems via USB 3.0 hub, external USB 3.0 port
Buttons: Reset, Mesh
Power: DC 12V 1A
WiFi: MT7976CN
UART: 115200n8
UART Layout:
VCC-RX-TX-GND
Installation:
A. Through OpenWrt Dashboard:
If your router comes with OpenWrt preinstalled (modified by the seller),
you can easily upgrade by going to the dashboard (192.168.1.1) and then
navigate to System -> Backup/Flash firmware, then flash the firmware
B. Through TFTP
Standard installation via UART:
1. Connect USB Serial Adapter to the UART, (NOTE: Don't connect the VCC pin).
2. Power on the router. Make sure that you can access your router via UART.
3. Restart the router then repeatedly press ctrl + c to skip default boot.
4. Type > bootmenu
5. Press '2' to select upgrade firmware
6. Press 'Y' on 'Run image after upgrading?'
7. Press '0' and hit 'enter' to select TFTP client (default)
8. Fill the U-Boot's IP address and TFTP server's IP address.
9. Finally, enter the 'firmware' filename.
Based on patch adding support for similar Zbtlink ZBT-Z8103AX device by
Ian Ishmael C. Oderon.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Christian Marangi [Sun, 19 Nov 2023 11:52:55 +0000 (12:52 +0100)]
generic: 6.1: backport upstream Aquantia PHY firmware loader patches
Backport merged upstream patch that adds support for firmware loader
from NVMEM or attached filesystem for Aquantia PHYs.
Refresh all kernel patches affected by this change.
Also update the path for aquantia .ko that got moved to dedicated
directory upstream.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Rosen Penev [Mon, 13 Nov 2023 20:14:37 +0000 (12:14 -0800)]
realtek: convert to nvmem-layout
nvmem-cells is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
John Audia [Mon, 20 Nov 2023 13:23:17 +0000 (08:23 -0500)]
kernel: bump 5.15 to 5.15.139
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.139
Removed upstreamed:
backport-5.15/830-v6.6-2-leds-turris-omnia-Drop-unnecessary-mutex-locking.patch[1]
backport-5.15/830-v6.7-1-leds-turris-omnia-Do-not-use-SMBUS-calls.patch[2]
x86/patches-5.15/120-hwrng-geode-fix-accessing-registers.patch[3]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.139&id=
aec3706971b332af8321b2beccba981b8061489a
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.139&id=
893eedf596dd81c7a7f0cd80b345956ae000eab9
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.139&id=
a5c83c8043d70b9a28d1bd78a2dbbab340f43889
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Mon, 20 Nov 2023 12:15:50 +0000 (07:15 -0500)]
kernel: bump 6.1 to 6.1.63
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.63
Removed upstreamed:
generic/backport-6.1/815-v6.6-2-leds-turris-omnia-Drop-unnecessary-mutex-locking.patch
generic/backport-6.1/815-v6.7-1-leds-turris-omnia-Do-not-use-SMBUS-calls.patch
ixp4xx/patches-6.1/0007-watchdog-ixp4xx-Make-sure-restart-always-works.patch
Manually rebased:
bcm27xx/patches-6.1/950-0606-hwrng-bcm2835-sleep-more-intelligently.patch
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.63&id=
7d0e60e4ff840e97fb18afb2a7344442c10a6fdf
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.63&id=
63cdeb20ee3bfef820b045b8d3b8395f9f815a74
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.63&id=
8803da01fe1b4ca3d37745283f7e73c6c2558c0c
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
Daniel Linjama [Thu, 2 Mar 2023 09:05:22 +0000 (11:05 +0200)]
ath79: add support for D-Link COVR-P2500 A1
Specifications:
* QCA9563, 16 MiB flash, 128 MiB RAM, 2T2R 802.11n
* QCA9886 2T2R 801.11ac Wave 2
* QCA7550 Homeplug AV2 1300
* AR8337, 3 Gigabit ports (1, 2: LAN; 3: WAN)
To make use of PLC functionality, firmware needs to be
provided via plchost (QCA7550 comes without SPI NOR),
patched with the Network Password and MAC.
Flashing via OEM Web Interface
* Flash 'factory.bin' using web-interface
* Wait until firmware succesfully installed and device booted
* Hold down reset button to reset factory defaults (~10 seconds)
Flashing via Recovery Web Interface:
* Hold down reset button during power-on (~10 seconds)
* Recovery Web UI is at 192.168.0.50, no DHCP.
* Flash 'recovery.bin' with
scripts/flashing/dlink_recovery_upload.py
(Recovery Web UI does not work with modern OSes)
Return to stock
* Hold down reset button during power-on (~10 seconds)
* Recovery Web UI is at 192.168.0.50, no DHCP.
* Flash unencrypted stock firmware with
scripts/flashing/dlink_recovery_upload.py
(Recovery Web UI does not work with modern OSes)
Co-developed-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Signed-off-by: Daniel Linjama <daniel@dev.linjama.com>
Hauke Mehrtens [Wed, 22 Nov 2023 23:15:40 +0000 (00:15 +0100)]
firmware-utils: Fix PKG_MIRROR_HASH
This fixes the mirror hash to the version of the file uploaded to the
download mirror and which my build calculated.
Fixes: b117e7244f9e ("firmware-utils: update to Git HEAD (2023-11-21)")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 22 Nov 2023 23:13:52 +0000 (00:13 +0100)]
tools: firmware-utils: Fix PKG_MIRROR_HASH
This fixes the mirror hash to the version of the file uploaded to the
download mirror and which my build calculated.
Fixes: 59a66d3c9b2a ("firmware-utils: update to Git HEAD (2023-11-21)")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Rosen Penev [Sat, 11 Nov 2023 02:52:20 +0000 (18:52 -0800)]
mvebu: remove mac-address-increment
It's deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rani Hod [Wed, 22 Nov 2023 17:38:06 +0000 (19:38 +0200)]
mediatek: fiilogic: device tree `switch@1f` fix
Quite a few `fiilogic` devices use the `mt7531` switch.
Some of them have a DT node that looks like:
```
switch: switch@0 {
compatible = "mediatek,mt7531";
reg = <31>;
...
};
```
This commit changes the DT node name to `switch@1f`.
Signed-off-by: Rani Hod <rani.hod@gmail.com>
Rosen Penev [Tue, 14 Nov 2023 03:52:47 +0000 (19:52 -0800)]
ipq806x: add missing interrupt-controller
Fixes dtc warnings
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 11 Nov 2023 22:59:41 +0000 (14:59 -0800)]
ipq806x: remove mac-address-increment
It's deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 11 Nov 2023 03:42:31 +0000 (19:42 -0800)]
lantiq: remove mac-address-increment
It's deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 11 Nov 2023 03:33:27 +0000 (19:33 -0800)]
bmips: remove mac-address-increment
It's deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Christian Marangi [Tue, 21 Nov 2023 22:57:44 +0000 (23:57 +0100)]
Revert "mpc85xx: replace user space MAC with nvmem"
This reverts commit
931fcf61891f14dffccd0ad5dfdf7d84460ff9f2.
The definition is wrong and require mac-base compatible. Also it's not
clear if it's correct to use 0xc for mac size.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Rosen Penev [Sun, 19 Nov 2023 01:23:48 +0000 (17:23 -0800)]
mpc85xx: replace user space MAC with nvmem
Possible now that NVMEM supports ASCII.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 11 Nov 2023 02:57:43 +0000 (18:57 -0800)]
mpc85xx: remove mac-address-increment
It's deprecated
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Tue, 14 Nov 2023 01:09:42 +0000 (17:09 -0800)]
mpc85xx: fix dtc warning
States to remove the linux prefix
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 11 Nov 2023 02:42:52 +0000 (18:42 -0800)]
octeon: remove mac-address-increment
It's deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rafał Miłecki [Tue, 21 Nov 2023 20:16:42 +0000 (21:16 +0100)]
firmware-utils: update to Git HEAD (2023-11-21)
12bf1a9 lxlfw: support certificate & signature blobs
eaf2ea2 lxlfw: support extracting image
d770cab lxlfw: support embedding blobs
16fa890 lxlfw: fix struct lxl_hdr attribute
8e149e4 lxlfw: move code copying data to helper function
3b114de lxlfw: move code opening LXL to helper function
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Wed, 15 Nov 2023 08:04:47 +0000 (09:04 +0100)]
kernel: drop "mac-address-increment-byte" DT property support
This downstream DT property is not used by any DTS file anymore.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 21 Nov 2023 15:30:22 +0000 (16:30 +0100)]
firmware-utils: update to Git HEAD (2023-11-21)
1d42292d8063 tplink-safeloader: Add TP-Link Archer A6 V3.20
3338f5389d72 tplink-safeloader: add TL-WPA8635P v3
17ca5eeb1c10 tplink-safeloader: add TL-WPA8631P v4
f730ad2fa0b4 bcmblob: new tool for reading Broadcom's BLOBs
cb1ddac98124 firmware-utils: fix typo in error message when no OpenSSL library found
916633160dc9 bcmclm: new tool for reading Broadcom's CLM data
a2d49fb1e188 tplink-safeloader: add RU support-list entry for Archer C6U v1
bb12cf5c3fa9 tplink-safeloader: Add support for TP-Link Deco M5 The special_id values are the same for EU and Asian models, and they apply to all models: v1, v2, and v3. They are not sorted as they are currently in the same order as extracted from the official firmware image.
9e2de8515be1 tplink-safeloader: add EAP610 v3 and EAP613 v1
a170683c0e11 firmware-utils: fix use of NULL string progname
89875fc18b57 tplink-safeloader: CPE510: add Canadian support
9e211d2980fe mktplinkfw2: add support to extract bootloader images
c18f662f3c74 mktplinkfw2: add support to pack bootloader
3dc133915f87 mktplinkfw2: show exact exceed bytes when the image is to big
d16ff798d58a tplink-safeloader: WPA8631: add v4 AU, US
0fa1cc51013f zytrx: add LTE5398-M904
635466123429 firmware-utils: ptgen: add SiFive GPT partition support
ba5bc4e1ae9d add dlink-sge-image for D-Link devices by SGE
3b114de29cf7 lxlfw: move code opening LXL to helper function
8e149e480391 lxlfw: move code copying data to helper function
16fa89076122 lxlfw: fix struct lxl_hdr attribute
d770cab82e58 lxlfw: support embedding blobs
eaf2ea28dbe6 lxlfw: support extracting image
12bf1a99bd6e lxlfw: support certificate & signature blobs
Fixes: https://github.com/openwrt/openwrt/issues/12939
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Tue, 21 Nov 2023 06:35:48 +0000 (07:35 +0100)]
umdns: update to Git HEAD (2023-11-21)
9040335e102b interface: fix interface memory corruption
b1e023eda358 add udebug support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 20 Nov 2023 22:03:48 +0000 (23:03 +0100)]
udebug: update to Git HEAD (2023-11-20)
759d9404034b ring: add missing fread return code check
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 20 Nov 2023 18:16:45 +0000 (19:16 +0100)]
netifd: update to Git HEAD (2023-11-20), adds udebug support
9dcc37a77cb2 add udebug support
525fa911e8ab replace DPRINTF calls with D(...)
7642eaba3838 system-linux: fix bogus debug error messages on adding bridge members
f3e06e81b347 wireless: add bridge_isolate option
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Sun, 19 Nov 2023 22:04:02 +0000 (22:04 +0000)]
uboot-envtools: add settings for Synology DS213j
Add settings to be able to access the U-Boot environment on the
Synology DS213j NAS.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 19 Nov 2023 22:01:47 +0000 (22:01 +0000)]
mvebu: add support for Synology DS213j
The Synology DS213j is a rather dated dual-bay SATA NAS based on on the
Marvell Armada-370 SoC. It has long been supported in vanilla Linux,
however, flash partitioning there didn't match with reality (ie. the
bootloaders expectations) and nobody cared to wrap up OpenWrt support
for the device.
CPU: Marvell Armada-370 ARMv7 SoC @ 1200 MHz
RAM: 512 MB DDR3
Flash: 8 MB (Micron Technology N25Q064)
Network: 1x 1000M/100M/10M Ethernet (Marvell
88E1510)
SATA: 2x 3.0Gbps
USB: 2x USB 2.0
As OS options are becoming limited on that still quite useful hardware,
patch the flash partitions to be able to get the most out of it when
using OpenWrt.
The vendor firmware loads kernel and initrd from fixed addresses in
the flash, not making use of a modifyable environment stored in flash
which is stored at a location right in the middle of the vendor's
zImage partition (at 0x100000).
Stock firmware flash layout:
0x000000 ~ 0x0c0000 : "RedBoot" (actually U-Boot)
0x0c0000 ~ 0x390000 : "zImage"
0x390000 ~ 0x7d0000 : "rd.gz"
0x7d0000 ~ 0x7e0000 : "vendor" (contains MAC address, serial no)
0x7e0000 ~ 0x7f0000 : "RedBoot Config" (unused? legacy left-over)
0x7f0000 ~ 0x800000 : "FIS directory" (unused? legacy left-over)
OpenWrt flash layout:
0x000000 ~ 0x0c0000 : "u-boot"
0x0c0000 ~ 0x100000 : "gap"
0x100000 ~ 0x110000 : "u-boot-env"
0x110000 ~ 0x7d0000 : "kernel"
0x7d0000 ~ 0x7e0000 : "vendor" (contains MAC address, serial no)
0x7e0000 ~ 0x800000 : "gap2"
"kernel", "gap" and "gap2" are concatenated using the mtd-concat
virtual MTD driver, resulting in a partition "firmware" used by
OpenWrt for kernel, rootfs and rootfs-overlay, 0x720000 (7296kiB) in
total.
Installation:
1. Connect to internal serial console port and Ethernet port,
providing a TFTP server at a static IPv4 address, e.g.
192.168.1.254/24.
2. Interrupt bootloader using CTRL+C
3. Configure bootloader to load OpenWrt on future boot:
setenv bootcmd "bootm
f4110000"
saveenv
4. Load and boot initramfs image via TFTP:
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.254
tftpboot openwrt-mvebu-cortexa9-synology_ds213j-initramfs-kernel.bin
bootm
5. Use sysupgrade to load final image.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Mon, 20 Nov 2023 13:03:43 +0000 (14:03 +0100)]
hostapd: add missing acl entries for udebug
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 20 Nov 2023 12:56:57 +0000 (13:56 +0100)]
ubus: update to Git HEAD (2023-11-14)
b3e8c4ef07eb Add auto subscribe support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 13 Nov 2023 16:44:04 +0000 (17:44 +0100)]
hostapd: add udebug support
This is not activated by default and must be explicitly enabled via ubus
It supports reporting log messages and netlink packets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 12 Nov 2023 20:28:34 +0000 (21:28 +0100)]
udebug: add new package
This will help with debugging by providing system wide access to per-process
ring buffers with debug data.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rani Hod [Sun, 25 Jun 2023 12:31:54 +0000 (15:31 +0300)]
ramips: D-Link Dxx-1xx0 image fixes
Three fixes for D-Link DAP-1620 rev B and its twin D-Link DRA-1360:
1. `uboot-envtools` is removed from default package list.
2. Makefile variable is doubly escaped, i.e. `$$$$(DLINK_HWID)`.
3. Previously the size of `factory.bin` was always 10.5 MiB, same as
D-Link firmwares. This commit makes it possible to use smaller images
(with no lost space due to padding) as well as larger images. Tested
successfully flashing a 6.5 MiB image and a 14.5 MiB image.
Recall that factory images need to be installed via D-Link Web Recovery
(at http://192.168.0.50/, server ignores pings and DHCP requests).
P.S.
I implemented the OEM firmware encryption algorithm, so firmware can be
flashed via OEM firmware, but after successful flashing the device
reboots to web recovery, so further debugging is required.
Signed-off-by: Rani Hod <rani.hod@gmail.com>
Carter Wang [Sat, 18 Nov 2023 13:40:39 +0000 (13:40 +0000)]
uboot-mediatek: Fix ubi command in uboot commands
Fix typo 'ubi remote ...' -> 'ubi remove ...'.
Signed-off-by: Carter Wang <carter.wang@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Philip Prindeville [Sun, 19 Nov 2023 19:26:15 +0000 (12:26 -0700)]
base-files: ipcalc.sh: Should take netmask or prefix after slash
dnmasq.init now invokes ipcalc.sh as either:
ipcalc.sh address/netmask ...
or:
ipcalc.sh address/prefix
but the existing version doesn't accept the 2nd notation. We're
trying to rationalize the usage of ipcalc.sh, and here we add
support for the 2nd format.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Renaud Gaspard [Sun, 22 Jan 2023 19:41:48 +0000 (20:41 +0100)]
ramips: Add support for TP-Link Archer C50 v6 (CA/EU/RU)
This adds support for the TP-Link Archer C50 v6 (CA/EU/RU).
(The ES variant is a rebranded Archer C54 and NOT supported.)
CPU: MediaTek MT7628 (580MHz)
RAM: 64M DDR2
FLASH: 8M SPI
WiFi: 2.4GHz 2x2 MT7628 b/g/n integrated
WiFi: 5GHz 2x2 MT7613 a/n/ac
ETH: 1x WAN 4x LAN
LED: Power, WiFi2, WiFi5, LAN, WAN, WPS
BTN: WPS/WiFi, RESET
UART: Near ETH ports, 115200 8n1, TP-Link pinout
Create Factory image
--------------------
As all installation methods require a U-Boot to be integrated into the
image (and we do not ship one with the image). We are not able to create
an image in the OpenWRT build-process.
Download a TP-Link image for your device variant (CA/EU or RU) from their
website and a OpenWRT sysupgrade image for the device
and build yourself a factory image like following:
TP-Link image: tpl.bin
OpenWRT sysupgrade image: owrt.bin
> dd if=tpl.bin of=boot.bin bs=131584 count=1
> cat owrt.bin >> boot.bin
Installing via Web-UI
---------------------
Upload the boot.bin via TP-Links firmware upgrade tool in the
web-interface.
Installing via Recovery
-----------------------
Activate Web-Recovery by beginning the upgrade Process with a
Firmware-Image from TP-Link. After starting the Firmware Upgrade,
wait ~3 seconds (When update status is switching to 0%), then
disconnect the power supply from the device. Upgrade flag (which
activates Web-Recovery) is written before the OS-image is touched and
removed after write is succesfull, so this procedure should be safe.
Plug the power back in. It will come up in Recovery-Mode on 192.168.0.1.
When active, all LEDs but the WPS LED are off.
Remeber to assign yourself a static IP-address as DHCP is not active in
this mode.
The boot.bin can now be uploaded and flashed using the web-recovery.
Installing via TFTP
-------------------
Prepare an image like following (Filenames from factory image steps
apply here)
> dd if=/dev/zero of=tp_recovery.bin bs=196608 count=1
> dd if=tpl.bin of=tmp.bin bs=131584 count=1
> dd if=tmp.bin of=boot.bin bs=512 skip=1
> cat boot.bin >> tp_recovery.bin
> cat owrt.bin >> tp_recovery.bin
Place tp_recovery.bin in root directory of TFTP server and listen on
192.168.0.66/24.
Connect router LAN ports with your computer and power up the router
while pressing the reset button. The router will download the image via
tftp and after ~1 Minute reboot into OpenWRT.
U-Boot CLI
----------
U-Boot CLI can be activated by holding down '4' on bootup.
Dual U-Boot
-----------
This is the first TP-Link MediaTek device to feature a split-uboot
design. The first (factory-uboot) provides recovery via TFTP and HTTP,
jumping straight into the second (firmware-uboot) if no recovery needs
to be performed. The firmware-uboot unpacks and executed the kernel.
Web-Recovery
------------
TP-Link integrated a new Web-Recovery like the one on the Archer C7v4 /
TL-WR1043v5. Stock-firmware sets a flag in the "romfile" partition
before beginning to write and removes it afterwards. If the router boots
with this flag set, bootloader will automatically start Web-recovery and
listens on 192.168.0.1. This way, the vendor-firmware or an OpenWRT
factory image can be written.
By doing the same while performing sysupgrade, we can take advantage of
the Web-recovery in OpenWRT.
It is important to note that Web-Recovery is only based on this flag. It
can't detect e.g. a crashing kernel or other means. Once activated it
won't boot the OS before a recovery action (either via TFTP or HTTP) is
performed. This recovery-mode is indicated by an illuminated WPS-LED on
boot.
Co-authored-by: Julius Schwartzenberg <julius.schwartzenberg@gmail.com>
Signed-off-by: Renaud Gaspard <gaspardrenaud@hotmail.com>
Signed-off-by: Julius Schwartzenberg <julius.schwartzenberg@gmail.com>
Tested-by: Julius Schwartzenberg <julius.schwartzenberg@gmail.com>
Tested-by: Jaroslav Mikulík <byczech@gmail.com>
Tested-by: Ashipa Eko <ashipa.eko@gmail.com>
Roland Reinl [Fri, 3 Nov 2023 10:22:02 +0000 (11:22 +0100)]
ramips: add support for D-Link COVR-X1860 A1
The COVR-X1860 are MT7621-based AX1800 devices (similar to DAP-X1860, but
with two Ethernet ports and external power supply) that are sold in sets
of two (COVR-X1862) and three (COVR-X1863).
Specification:
- MT7621
- MT7915 + MT7975 2x2 802.11ax (DBDC)
- 256MB RAM
- 128 MB flash
- 3 LEDs (red, orange, white), routed to one indicator in the top of the device
- 2 buttons (WPS in the back and Reset at the bottom of the device)
MAC addresses:
- LAN MAC (printed on the device) is stored in config2 partition as ASCII (entry factory_mac=xx:xx:xx:xx:xx:xx)
- WAN MAC: LAN MAC + 3
- 2.4G MAC: LAN MAC + 1
- 5G MAC: LAN MAC + 2
The pins for the serial console are already labeled on the board (VCC, TX, RX, GND). Serial settings: 3.3V, 115200,8n1
Flashing via OEM Web Interface:
- Download openwrt-ramips-mt7621-dlink_covr-x1860-a1-squashfs-factory.bin via the OEM web interface firmware update
- The configuration wizard can be skipped by directly going to http://192.168.0.1/UpdateFirmware_Simple.html
Flashing via Recovery Web Interface:
- Set your IP address to 192.168.0.10, subnetmask 255.255.255.0
- Press the reset button while powering on the deivce
- Keep the reset button pressed until the status LED blinks red
- Open a Chromium based browser and goto http://192.168.0.1
- Download openwrt-ramips-mt7621-dlink_covr-x1860-a1-squashfs-recovery.bin
Revert back to stock using the Recovery Web Interface:
- Set your IP address to 192.168.0.10, subnetmask 255.255.255.25
- Press the reset button while powering on the deivce
- Keep the reset button pressed until the status LED blinks red
- Open a Chromium based browser and goto http://192.168.0.1
- Flash a decrypted firmware image from D-Link. Decrypting an firmware image is described below.
Decrypting a D-Link firmware image:
- Download https://github.com/openwrt/firmware-utils/blob/master/src/dlink-sge-image.c and https://raw.githubusercontent.com/openwrt/firmware-utils/master/src/dlink-sge-image.h
- Compile a binary from the downloaded file, e.g. gcc dlink-sge-image.c -lcrypto -o dlink-sge-image
- Run ./dlink-sge-image COVR-X1860 <OriginalFirmware> <OutputFile> -d
- Example for firmware 102b01: ./dlink-sge-image COVR-X1860 COVR-X1860_RevA_Firmware_102b01.bin COVR-X1860_RevA_Firmware_102b01_Decrypted.bin -d
The pull request is based on the discussion in https://forum.openwrt.org/t/add-support-for-d-link-covr-x1860
Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>
Nazar Mokrynskyi [Tue, 14 Nov 2023 03:49:28 +0000 (05:49 +0200)]
hostapd: fix undeclared variable iface_name
Signed-off-by: Nazar Mokrynskyi <nazar@mokrynskyi.com>
projects / openwrt / staging / wigyori.git / log