git.openwrt.org Git - openwrt/staging/blogic.git/log

net/af_iucv: remove GFP_DMA restriction for HiperTransport

af_iucv sockets over z/VM IUCV require that their skbs are allocated
in DMA memory. This restriction doesn't apply to connections over
HiperSockets. So only set this limit for z/VM IUCV sockets, thereby
increasing the likelihood that the large (and linear!) allocations for
HiperTransport messages succeed.

Fixes: 3881ac441f64 ("af_iucv: add HiperSockets transport")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()

The comment is correct, but the code ends up moving the bits four
places too far, into the VTUOp field.

Fixes: 11ea809f1a74 (net: dsa: mv88e6xxx: support 256 databases)
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Module autoload for masquerade and redirection does not work.

2) Leak in unqueued packets in nf_ct_frag6_queue(). Ignore duplicated
fragments, pretend they are placed into the queue. Patches from
Guillaume Nault.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

hvsock: fix epollout hang from race condition

Currently, hvsock can enter into a state where epoll_wait on EPOLLOUT will
not return even when the hvsock socket is writable, under some race
condition. This can happen under the following sequence:
- fd = socket(hvsocket)
- fd_out = dup(fd)
- fd_in = dup(fd)
- start a writer thread that writes data to fd_out with a combination of
  epoll_wait(fd_out, EPOLLOUT) and
- start a reader thread that reads data from fd_in with a combination of
  epoll_wait(fd_in, EPOLLIN)
- On the host, there are two threads that are reading/writing data to the
  hvsocket

stack:
hvs_stream_has_space
hvs_notify_poll_out
vsock_poll
sock_poll
ep_poll

Race condition:
check for epollout from ep_poll():
assume no writable space in the socket
hvs_stream_has_space() returns 0
check for epollin from ep_poll():
assume socket has some free space < HVS_PKT_LEN(HVS_SEND_BUF_SIZE)
hvs_stream_has_space() will clear the channel pending send size
host will not notify the guest because the pending send size has
been cleared and so the hvsocket will never mark the
socket writable

Now, the EPOLLOUT will never return even if the socket write buffer is
empty.

The fix is to set the pending size to the default size and never change it.
This way the host will always notify the guest whenever the writable space
is bigger than the pending size. The host is already optimized to *only*
notify the guest when the pending size threshold boundary is crossed and
not everytime.

This change also reduces the cpu usage somewhat since hv_stream_has_space()
is in the hotpath of send:
vsock_stream_sendmsg()->hv_stream_has_space()
Earlier hv_stream_has_space was setting/clearing the pending size on every
call.

Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/udp_gso: Allow TX timestamp with UDP GSO

Fixes an issue where TX Timestamps are not arriving on the error queue
when UDP_SEGMENT CMSG type is combined with CMSG type SO_TIMESTAMPING.
This can be illustrated with an updated updgso_bench_tx program which
includes the '-T' option to test for this condition. It also introduces
the '-P' option which will call poll() before reading the error queue.

    ./udpgso_bench_tx -4ucTPv -S 1472 -l2 -D 172.16.120.18
    poll timeout
    udp tx:      0 MB/s        1 calls/s      1 msg/s

The "poll timeout" message above indicates that TX timestamp never
arrived.

This patch preserves tx_flags for the first UDP GSO segment. Only the
first segment is timestamped, even though in some cases there may be
benefital in timestamping both the first and last segment.

Factors in deciding on first segment timestamp only:

- Timestamping both first and last segmented is not feasible. Hardware
can only have one outstanding TS request at a time.

- Timestamping last segment may under report network latency of the
previous segments. Even though the doorbell is suppressed, the ring
producer counter has been incremented.

- Timestamping the first segment has the upside in that it reports
timestamps from the application's view, e.g. RTT.

- Timestamping the first segment has the downside that it may
underreport tx host network latency. It appears that we have to pick
one or the other. And possibly follow-up with a config flag to choose
behavior.

v2: Remove tests as noted by Willem de Bruijn <willemb@google.com>
    Moving tests from net to net-next

v3: Update only relevant tx_flag bits as per
    Willem de Bruijn <willemb@google.com>

v4: Update comments and commit message as per
    Willem de Bruijn <willemb@google.com>

Fixes: ee80d1ebe5ba ("udp: add udp gso")
Signed-off-by: Fred Klassen <fklassen@appneta.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-netem-fix-issues-with-corrupting-GSO-frames'

Jakub Kicinski says:

====================
net: netem: fix issues with corrupting GSO frames

Corrupting GSO frames currently leads to crashes, due to skb use
after free. These stem from the skb list handling - the segmented
skbs come back on a list, and this list is not properly unlinked
before enqueuing the segments. Turns out this condition is made
very likely to occur because of another bug - in backlog accounting.
Segments are counted twice, which means qdisc's limit gets reached
leading to drops and making the use after free very likely to happen.

The bugs are fixed in order in which they were added to the tree.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: netem: fix use after free and double free with packet corruption

Brendan reports that the use of netem's packet corruption capability
leads to strange crashes.  This seems to be caused by
commit d66280b12bd7 ("net: netem: use a list in addition to rbtree")
which uses skb->next pointer to construct a fast-path queue of
in-order skbs.

Packet corruption code has to invoke skb_gso_segment() in case
of skbs in need of GSO.  skb_gso_segment() returns a list of
skbs.  If next pointers of the skbs on that list do not get cleared
fast path list may point to freed skbs or skbs which are also on
the RB tree.

Let's say skb gets segmented into 3 frames:

A -> B -> C

A gets hooked to the t_head t_tail list by tfifo_enqueue(), but it's
next pointer didn't get cleared so we have:

h t
|/
A -> B -> C

Now if B and C get also get enqueued successfully all is fine, because
tfifo_enqueue() will overwrite the list in order.  IOW:

Enqueue B:

h    t
|    |
A -> B    C

Enqueue C:

h         t
|         |
A -> B -> C

But if B and C get reordered we may end up with:

h t            RB tree
|/                |
A -> B -> C       B
                   \
                    C

Or if they get dropped just:

h t
|/
A -> B -> C

where A and B are already freed.

To reproduce either limit has to be set low to cause freeing of
segs or reorders have to happen (due to delay jitter).

Note that we only have to mark the first segment as not on the
list, "finish_segs" handling of other frags already does that.

Another caveat is that qdisc_drop_all() still has to free all
segments correctly in case of drop of first segment, therefore
we re-link segs before calling it.

v2:
- re-link before drop, v1 was leaking non-first segs if limit
   was hit at the first seg
- better commit message which lead to discovering the above :)

Reported-by: Brendan Galloway <brendan.galloway@netronome.com>
Fixes: d66280b12bd7 ("net: netem: use a list in addition to rbtree")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: netem: fix backlog accounting for corrupted GSO frames

When GSO frame has to be corrupted netem uses skb_gso_segment()
to produce the list of frames, and re-enqueues the segments one
by one. The backlog length has to be adjusted to account for
new frames.

The current calculation is incorrect, leading to wrong backlog
lengths in the parent qdisc (both bytes and packets), and
incorrect packet backlog count in netem itself.

Parent backlog goes negative, netem's packet backlog counts
all non-first segments twice (thus remaining non-zero even
after qdisc is emptied).

Move the variables used to count the adjustment into local
scope to make 100% sure they aren't used at any stage in
backports.

Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lio_core: fix potential sign-extension overflow on large shift

Left shifting the signed int value 1 by 31 bits has undefined behaviour
and the shift amount oq_no can be as much as 63. Fix this by using
BIT_ULL(oq_no) instead.

Addresses-Coverity: ("Bad shift operation")
Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-fix-quite-a-few-dst_cache-crashes-reported-by-syzbot'

Xin Long says:

====================
net: fix quite a few dst_cache crashes reported by syzbot

There are two kinds of crashes reported many times by syzbot with no
reproducer. Call Traces are like:

     BUG: KASAN: slab-out-of-bounds in rt_cache_valid+0x158/0x190
     net/ipv4/route.c:1556
       rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556
       __mkroute_output net/ipv4/route.c:2332 [inline]
       ip_route_output_key_hash_rcu+0x819/0x2d50 net/ipv4/route.c:2564
       ip_route_output_key_hash+0x1ef/0x360 net/ipv4/route.c:2393
       __ip_route_output_key include/net/route.h:125 [inline]
       ip_route_output_flow+0x28/0xc0 net/ipv4/route.c:2651
       ip_route_output_key include/net/route.h:135 [inline]
     ...

   or:

     kasan: GPF could be caused by NULL-ptr deref or user memory access
     RIP: 0010:dst_dev_put+0x24/0x290 net/core/dst.c:168
       <IRQ>
       rt_fibinfo_free_cpus net/ipv4/fib_semantics.c:200 [inline]
       free_fib_info_rcu+0x2e1/0x490 net/ipv4/fib_semantics.c:217
       __rcu_reclaim kernel/rcu/rcu.h:240 [inline]
       rcu_do_batch kernel/rcu/tree.c:2437 [inline]
       invoke_rcu_callbacks kernel/rcu/tree.c:2716 [inline]
       rcu_process_callbacks+0x100a/0x1ac0 kernel/rcu/tree.c:2697
     ...

They were caused by the fib_nh_common percpu member 'nhc_pcpu_rth_output'
overwritten by another percpu variable 'dev->tstats' access overflow in
tipc udp media xmit path when counting packets on a non tunnel device.

The fix is to make udp tunnel work with no tunnel device by allowing not
to count packets on the tstats when the tunnel dev is NULL in Patches 1/3
and 2/3, then pass a NULL tunnel dev in tipc_udp_tunnel() in Patch 3/3.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb

udp_tunnel(6)_xmit_skb() called by tipc_udp_xmit() expects a tunnel device
to count packets on dev->tstats, a perpcu variable. However, TIPC is using
udp tunnel with no tunnel device, and pass the lower dev, like veth device
that only initializes dev->lstats(a perpcu variable) when creating it.

Later iptunnel_xmit_stats() called by ip(6)tunnel_xmit() thinks the dev as
a tunnel device, and uses dev->tstats instead of dev->lstats. tstats' each
pointer points to a bigger struct than lstats, so when tstats->tx_bytes is
increased, other percpu variable's members could be overwritten.

syzbot has reported quite a few crashes due to fib_nh_common percpu member
'nhc_pcpu_rth_output' overwritten, call traces are like:

  BUG: KASAN: slab-out-of-bounds in rt_cache_valid+0x158/0x190
  net/ipv4/route.c:1556
    rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556
    __mkroute_output net/ipv4/route.c:2332 [inline]
    ip_route_output_key_hash_rcu+0x819/0x2d50 net/ipv4/route.c:2564
    ip_route_output_key_hash+0x1ef/0x360 net/ipv4/route.c:2393
    __ip_route_output_key include/net/route.h:125 [inline]
    ip_route_output_flow+0x28/0xc0 net/ipv4/route.c:2651
    ip_route_output_key include/net/route.h:135 [inline]
  ...

or:

  kasan: GPF could be caused by NULL-ptr deref or user memory access
  RIP: 0010:dst_dev_put+0x24/0x290 net/core/dst.c:168
    <IRQ>
    rt_fibinfo_free_cpus net/ipv4/fib_semantics.c:200 [inline]
    free_fib_info_rcu+0x2e1/0x490 net/ipv4/fib_semantics.c:217
    __rcu_reclaim kernel/rcu/rcu.h:240 [inline]
    rcu_do_batch kernel/rcu/tree.c:2437 [inline]
    invoke_rcu_callbacks kernel/rcu/tree.c:2716 [inline]
    rcu_process_callbacks+0x100a/0x1ac0 kernel/rcu/tree.c:2697
  ...

The issue exists since tunnel stats update is moved to iptunnel_xmit by
Commit 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()"),
and here to fix it by passing a NULL tunnel dev to udp_tunnel(6)_xmit_skb
so that the packets counting won't happen on dev->tstats.

Reported-by: syzbot+9d4c12bfd45a58738d0a@syzkaller.appspotmail.com
Reported-by: syzbot+a9e23ea2aa21044c2798@syzkaller.appspotmail.com
Reported-by: syzbot+c4c4b2bb358bb936ad7e@syzkaller.appspotmail.com
Reported-by: syzbot+0290d2290a607e035ba1@syzkaller.appspotmail.com
Reported-by: syzbot+a43d8d4e7e8a7a9e149e@syzkaller.appspotmail.com
Reported-by: syzbot+a47c5f4c6c00fc1ed16e@syzkaller.appspotmail.com
Fixes: 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL

A similar fix to Patch "ip_tunnel: allow not to count pkts on tstats by
setting skb's dev to NULL" is also needed by ip6_tunnel.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL

iptunnel_xmit() works as a common function, also used by a udp tunnel
which doesn't have to have a tunnel device, like how TIPC works with
udp media.

In these cases, we should allow not to count pkts on dev's tstats, so
that udp tunnel can work with no tunnel device safely.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tun: wake up waitqueues after IFF_UP is set

Currently after setting tap0 link up, the tun code wakes tx/rx waited
queues up in tun_net_open() when .ndo_open() is called, however the
IFF_UP flag has not been set yet. If there's already a wait queue, it
would fail to transmit when checking the IFF_UP flag in tun_sendmsg().
Then the saving vhost_poll_start() will add the wq into wqh until it
is waken up again. Although this works when IFF_UP flag has been set
when tun_chr_poll detects; this is not true if IFF_UP flag has not
been set at that time. Sadly the latter case is a fatal error, as
the wq will never be waken up in future unless later manually
setting link up on purpose.

Fix this by moving the wakeup process into the NETDEV_UP event
notifying process, this makes sure IFF_UP has been set before all
waited queues been waken up.

Signed-off-by: Fei Li <lifei.shirley@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: remove duplicate fetch in sock_getsockopt

In sock_getsockopt(), 'optlen' is fetched the first time from userspace.
'len < 0' is then checked. Then in condition 'SO_MEMINFO', 'optlen' is
fetched the second time from userspace.

If change it between two fetches may cause security problems or unexpected
behaivor, and there is no reason to fetch it a second time.

To fix this, we need to remove the second fetch.

Signed-off-by: JingYi Hou <houjingyi647@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix issues with early FAILOVER_MSG from peer

It appears that a FAILOVER_MSG can come from peer even when the failure
link is resetting (i.e. just after the 'node_write_unlock()'...). This
means the failover procedure on the node has not been started yet.
The situation is as follows:

         node1                                node2
  linkb          linka                  linka        linkb
    |              |                      |            |
    |              |                      x failure    |
    |              |                  RESETTING        |
    |              |                      |            |
    |              x failure            RESET          |
    |          RESETTING             FAILINGOVER       |
    |              |   (FAILOVER_MSG)     |            |
    |<-------------------------------------------------|
    | *FAILINGOVER |                      |            |
    |              | (dummy FAILOVER_MSG) |            |
    |------------------------------------------------->|
    |            RESET                    |            | FAILOVER_END
    |         FAILINGOVER               RESET          |
    .              .                      .            .
    .              .                      .            .
    .              .                      .            .

Once this happens, the link failover procedure will be triggered
wrongly on the receiving node since the node isn't in FAILINGOVER state
but then another link failover will be carried out.
The consequences are:

1) A peer might get stuck in FAILINGOVER state because the 'sync_point'
was set, reset and set incorrectly, the criteria to end the failover
would not be met, it could keep waiting for a message that has already
received.

2) The early FAILOVER_MSG(s) could be queued in the link failover
deferdq but would be purged or not pulled out because the 'drop_point'
was not set correctly.

3) The early FAILOVER_MSG(s) could be dropped too.

4) The dummy FAILOVER_MSG could make the peer leaving FAILINGOVER state
shortly, but later on it would be restarted.

The same situation can also happen when the link is in PEER_RESET state
and a FAILOVER_MSG arrives.

The commit resolves the issues by forcing the link down immediately, so
the failover procedure will be started normally (which is the same as
when receiving a FAILOVER_MSG and the link is in up state).

Also, the function "tipc_node_link_failover()" is toughen to avoid such
a situation from happening.

Acked-by: Jon Maloy <jon.maloy@ericsson.se>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Check if transceiver implements DDM before access

Some transceivers may comply with SFF-8472 even though they do not
implement the Digital Diagnostic Monitoring (DDM) interface described in
the spec. The existence of such area is specified by the 6th bit of byte
92, set to 1 if implemented.

Currently, without checking this bit, bnx2x fails trying to read sfp
module's EEPROM with the follow message:

ethtool -m enP5p1s0f1
Cannot get Module EEPROM data: Input/output error

Because it fails to read the additional 256 bytes in which it is assumed
to exist the DDM data.

This issue was noticed using a Mellanox Passive DAC PN 01FT738. The EEPROM
data was confirmed by Mellanox as correct and similar to other Passive
DACs from other manufacturers.

Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs

Pull vfs fixes from Al Viro:
"MS_MOVE regression fix + breakage in fsmount(2) (also introduced in
  this cycle, along with fsmount(2) itself).

  I'm still digging through the piles of mail, so there might be more
  fixes to follow, but these two are obvious and self-contained, so
  there's no point delaying those..."

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs/namespace: fix unprivileged mount propagation
  vfs: fsmount: add missing mntget()

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:
"Lots of bug fixes here:

   1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.

   2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
      Crispin.

   3) Use after free in psock backlog workqueue, from John Fastabend.

   4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
      Salem.

   5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.

   6) Network header needs to be set for packet redirect in nfp, from
      John Hurley.

   7) Fix udp zerocopy refcnt, from Willem de Bruijn.

   8) Don't assume linear buffers in vxlan and geneve error handlers,
      from Stefano Brivio.

   9) Fix TOS matching in mlxsw, from Jiri Pirko.

  10) More SCTP cookie memory leak fixes, from Neil Horman.

  11) Fix VLAN filtering in rtl8366, from Linus Walluij.

  12) Various TCP SACK payload size and fragmentation memory limit fixes
      from Eric Dumazet.

  13) Use after free in pneigh_get_next(), also from Eric Dumazet.

  14) LAPB control block leak fix from Jeremy Sowden"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
  lapb: fixed leak of control-blocks.
  tipc: purge deferredq list for each grp member in tipc_group_delete
  ax25: fix inconsistent lock state in ax25_destroy_timer
  neigh: fix use-after-free read in pneigh_get_next
  tcp: fix compile error if !CONFIG_SYSCTL
  hv_sock: Suppress bogus "may be used uninitialized" warnings
  be2net: Fix number of Rx queues used for flow hashing
  net: handle 802.1P vlan 0 packets properly
  tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
  tcp: add tcp_min_snd_mss sysctl
  tcp: tcp_fragment() should apply sane memory limits
  tcp: limit payload size of sacked skbs
  Revert "net: phylink: set the autoneg state in phylink_phy_change"
  bpf: fix nested bpf tracepoints with per-cpu data
  bpf: Fix out of bounds memory access in bpf_sk_storage
  vsock/virtio: set SOCK_DONE on peer shutdown
  net: dsa: rtl8366: Fix up VLAN filtering
  net: phylink: set the autoneg state in phylink_phy_change
  net: add high_order_alloc_disable sysctl/static key
  tcp: add tcp_tx_skb_cache sysctl
  ...

fs/namespace: fix unprivileged mount propagation

When propagating mounts across mount namespaces owned by different user
namespaces it is not possible anymore to move or umount the mount in the
less privileged mount namespace.

Here is a reproducer:

  sudo mount -t tmpfs tmpfs /mnt
  sudo --make-rshared /mnt

  # create unprivileged user + mount namespace and preserve propagation
  unshare -U -m --map-root --propagation=unchanged

  # now change back to the original mount namespace in another terminal:
  sudo mkdir /mnt/aaa
  sudo mount -t tmpfs tmpfs /mnt/aaa

  # now in the unprivileged user + mount namespace
  mount --move /mnt/aaa /opt

Unfortunately, this is a pretty big deal for userspace since this is
e.g. used to inject mounts into running unprivileged containers.
So this regression really needs to go away rather quickly.

The problem is that a recent change falsely locked the root of the newly
added mounts by setting MNT_LOCKED. Fix this by only locking the mounts
on copy_mnt_ns() and not when adding a new mount.

Fixes: 3bd045cc9c4b ("separate copying and locking mount tree on cross-userns copies")
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Tested-by: Christian Brauner <christian@brauner.io>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

vfs: fsmount: add missing mntget()

sys_fsmount() needs to take a reference to the new mount when adding it
to the anonymous mount namespace. Otherwise the filesystem can be
unmounted while it's still in use, as found by syzkaller.

Reported-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: syzbot+99de05d099a170867f22@syzkaller.appspotmail.com
Reported-by: syzbot+7008b8b8ba7df475fdc8@syzkaller.appspotmail.com
Fixes: 93766fbd2696 ("vfs: syscall: Add fsmount() to create a mount for a superblock")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge branch 'tcp-fixes'

Eric Dumazet says:

====================
tcp: make sack processing more robust

Jonathan Looney brought to our attention multiple problems
in TCP stack at the sender side.

SACK processing can be abused by malicious peers to either
cause overflows, or increase of memory usage.

First two patches fix the immediate problems.

Since the malicious peers abuse senders by advertizing a very
small MSS in their SYN or SYNACK packet, the last two
patches add a new sysctl so that admins can chose a higher
limit for MSS clamping.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'riscv-for-v5.2/fixes-rc6' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Paul Walmsley:
"This contains fixes, defconfig, and DT data changes for the v5.2-rc
  series.

  The fixes are relatively straightforward:

   - Addition of a TLB fence in the vmalloc_fault path, so the CPU
     doesn't enter an infinite page fault loop

   - Readdition of the pm_power_off export, so device drivers that
     reassign it can now be built as modules

   - A udelay() fix for RV32, fixing a miscomputation of the delay time

   - Removal of deprecated smp_mb__*() barriers

  This also adds initial DT data infrastructure for arch/riscv, along
  with initial data for the SiFive FU540-C000 SoC and the corresponding
  HiFive Unleashed board.

  We also update the RV64 defconfig to include some core drivers for the
  FU540 in the build"

* tag 'riscv-for-v5.2/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: remove unused barrier defines
  riscv: mm: synchronize MMU after pte change
  riscv: dts: add initial board data for the SiFive HiFive Unleashed
  riscv: dts: add initial support for the SiFive FU540-C000 SoC
  dt-bindings: riscv: convert cpu binding to json-schema
  dt-bindings: riscv: sifive: add YAML documentation for the SiFive FU540
  arch: riscv: add support for building DTB files from DT source data
  riscv: Fix udelay in RV32.
  riscv: export pm_power_off again
  RISC-V: defconfig: enable clocks, serial console

riscv: remove unused barrier defines

They were introduced in commit fab957c11efe ("RISC-V: Atomic and
Locking Code") long after commit 2e39465abc4b ("locking: Remove
deprecated smp_mb__() barriers") removed the remnants of all previous
instances from the tree.

Signed-off-by: Rolf Eike Beer <eb@emlix.com>
[paul.walmsley@sifive.com: stripped spurious mbox header from patch
description; fixed commit references in patch header]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

riscv: mm: synchronize MMU after pte change

Because RISC-V compliant implementations can cache invalid entries
in TLB, an SFENCE.VMA is necessary after changes to the page table.
This patch adds an SFENCE.vma for the vmalloc_fault path.

Signed-off-by: ShihPo Hung <shihpo.hung@sifive.com>
[paul.walmsley@sifive.com: reversed tab->whitespace conversion,
wrapped comment lines]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-riscv@lists.infradead.org
Cc: stable@vger.kernel.org

riscv: dts: add initial board data for the SiFive HiFive Unleashed

Add initial board data for the SiFive HiFive Unleashed A00.

Currently the data populated in this DT file describes the board
DRAM configuration and the external clock sources that supply the
PRCI.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Loys Ollivier <lollivier@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org

riscv: dts: add initial support for the SiFive FU540-C000 SoC

Add initial support for the SiFive FU540-C000 SoC. This is a 28nm SoC
based around the SiFive U54-MC core complex and a TileLink
interconnect.

This file is expected to grow as more device drivers are added to the
kernel.

This patch includes a fix to the QSPI memory map due to a
documentation bug, found by ShihPo Hung <shihpo.hung@sifive.com>, adds
entries for the I2C controller, and merges all DT changes that
formerly were made dynamically by the riscv-pk BBL proxy kernel.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Loys Ollivier <lollivier@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: ShihPo Hung <shihpo.hung@sifive.com>
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org

dt-bindings: riscv: convert cpu binding to json-schema

At Rob's request, we're starting to migrate our DT binding
documentation to json-schema YAML format.  Start by converting our cpu
binding documentation.  While doing so, document more properties and
nodes.  This includes adding binding documentation support for the E51
and U54 CPU cores ("harts") that are present on this SoC.  These cores
are described in:

    https://static.dev.sifive.com/FU540-C000-v1.0.pdf

This cpus.yaml file is intended to be a starting point and to
evolve over time.  It passes dt-doc-validate as of the yaml-bindings
commit 4c79d42e9216.

This patch was originally based on the ARM json-schema binding
documentation as added by commit 672951cbd1b7 ("dt-bindings: arm: Convert
cpu binding to json-schema").

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-riscv@lists.infradead.org

dt-bindings: riscv: sifive: add YAML documentation for the SiFive FU540

Add YAML DT binding documentation for the SiFive FU540 SoC. This
SoC is documented at:

https://static.dev.sifive.com/FU540-C000-v1.0.pdf

Passes dt-doc-validate, as of yaml-bindings commit 4c79d42e9216.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org

arch: riscv: add support for building DTB files from DT source data

Similar to ARM64, add support for building DTB files from DT source
data for RISC-V boards.

This patch starts with the infrastructure needed for SiFive boards.
Boards from other vendors would add support here in a similar form.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Loys Ollivier <lollivier@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>

lapb: fixed leak of control-blocks.

lapb_register calls lapb_create_cb, which initializes the control-
block's ref-count to one, and __lapb_insert_cb, which increments it when
adding the new block to the list of blocks.

lapb_unregister calls __lapb_remove_cb, which decrements the ref-count
when removing control-block from the list of blocks, and calls lapb_put
itself to decrement the ref-count before returning.

However, lapb_unregister also calls __lapb_devtostruct to look up the
right control-block for the given net_device, and __lapb_devtostruct
also bumps the ref-count, which means that when lapb_unregister returns
the ref-count is still 1 and the control-block is leaked.

Call lapb_put after __lapb_devtostruct to fix leak.

Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: purge deferredq list for each grp member in tipc_group_delete

Syzbot reported a memleak caused by grp members' deferredq list not
purged when the grp is be deleted.

The issue occurs when more(msg_grp_bc_seqno(hdr), m->bc_rcv_nxt) in
tipc_group_filter_msg() and the skb will stay in deferredq.

So fix it by calling __skb_queue_purge for each member's deferredq
in tipc_group_delete() when a tipc sk leaves the grp.

Fixes: b87a5ea31c93 ("tipc: guarantee group unicast doesn't bypass group broadcast")
Reported-by: syzbot+78fbe679c8ca8d264a8d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ax25: fix inconsistent lock state in ax25_destroy_timer

Before thread in process context uses bh_lock_sock()
we must disable bh.

sysbot reported :

WARNING: inconsistent lock state
5.2.0-rc3+ #32 Not tainted

inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
blkid/26581 [HC0[0]:SC1[1]:HE1:SE0] takes:
00000000e0da85ee (slock-AF_AX25){+.?.}, at: spin_lock include/linux/spinlock.h:338 [inline]
00000000e0da85ee (slock-AF_AX25){+.?.}, at: ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
{SOFTIRQ-ON-W} state was registered at:
  lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
  __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
  _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
  spin_lock include/linux/spinlock.h:338 [inline]
  ax25_rt_autobind+0x3ca/0x720 net/ax25/ax25_route.c:429
  ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1221
  __sys_connect+0x264/0x330 net/socket.c:1834
  __do_sys_connect net/socket.c:1845 [inline]
  __se_sys_connect net/socket.c:1842 [inline]
  __x64_sys_connect+0x73/0xb0 net/socket.c:1842
  do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
irq event stamp: 2272
hardirqs last  enabled at (2272): [<ffffffff810065f3>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (2271): [<ffffffff8100660f>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last  enabled at (1522): [<ffffffff87400654>] __do_softirq+0x654/0x94c kernel/softirq.c:320
softirqs last disabled at (2267): [<ffffffff81449010>] invoke_softirq kernel/softirq.c:374 [inline]
softirqs last disabled at (2267): [<ffffffff81449010>] irq_exit+0x180/0x1d0 kernel/softirq.c:414

other info that might help us debug this:
Possible unsafe locking scenario:

       CPU0
       ----
  lock(slock-AF_AX25);
  <Interrupt>
    lock(slock-AF_AX25);

*** DEADLOCK ***

1 lock held by blkid/26581:
#0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:175 [inline]
#0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: call_timer_fn+0xe0/0x720 kernel/time/timer.c:1312

stack backtrace:
CPU: 1 PID: 26581 Comm: blkid Not tainted 5.2.0-rc3+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_usage_bug.cold+0x393/0x4a2 kernel/locking/lockdep.c:2935
valid_state kernel/locking/lockdep.c:2948 [inline]
mark_lock_irq kernel/locking/lockdep.c:3138 [inline]
mark_lock+0xd46/0x1370 kernel/locking/lockdep.c:3513
mark_irqflags kernel/locking/lockdep.c:3391 [inline]
__lock_acquire+0x159f/0x5490 kernel/locking/lockdep.c:3745
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
spin_lock include/linux/spinlock.h:338 [inline]
ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
call_timer_fn+0x193/0x720 kernel/time/timer.c:1322
expire_timers kernel/time/timer.c:1366 [inline]
__run_timers kernel/time/timer.c:1685 [inline]
__run_timers kernel/time/timer.c:1653 [inline]
run_timer_softirq+0x66f/0x1740 kernel/time/timer.c:1698
__do_softirq+0x25c/0x94c kernel/softirq.c:293
invoke_softirq kernel/softirq.c:374 [inline]
irq_exit+0x180/0x1d0 kernel/softirq.c:414
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806
</IRQ>
RIP: 0033:0x7f858d5c3232
Code: 8b 61 08 48 8b 84 24 d8 00 00 00 4c 89 44 24 28 48 8b ac 24 d0 00 00 00 4c 8b b4 24 e8 00 00 00 48 89 7c 24 68 48 89 4c 24 78 <48> 89 44 24 58 8b 84 24 e0 00 00 00 89 84 24 84 00 00 00 8b 84 24
RSP: 002b:00007ffcaf0cf5c0 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
RAX: 00007f858d7d27a8 RBX: 00007f858d7d8820 RCX: 00007f858d3940d8
RDX: 00007ffcaf0cf798 RSI: 00000000f5e616f3 RDI: 00007f858d394fee
RBP: 0000000000000000 R08: 00007ffcaf0cf780 R09: 00007f858d7db480
R10: 0000000000000000 R11: 0000000009691a75 R12: 0000000000000005
R13: 00000000f5e616f3 R14: 0000000000000000 R15: 00007ffcaf0cf798

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

neigh: fix use-after-free read in pneigh_get_next

Nine years ago, I added RCU handling to neighbours, not pneighbours.
(pneigh are not commonly used)

Unfortunately I missed that /proc dump operations would use a
common entry and exit point : neigh_seq_start() and neigh_seq_stop()

We need to read_lock(tbl->lock) or risk use-after-free while
iterating the pneigh structures.

We might later convert pneigh to RCU and revert this patch.

sysbot reported :

BUG: KASAN: use-after-free in pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
Read of size 8 at addr ffff888097f2a700 by task syz-executor.0/9825

CPU: 1 PID: 9825 Comm: syz-executor.0 Not tainted 5.2.0-rc4+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
__kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
kasan_report+0x12/0x20 mm/kasan/common.c:614
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
neigh_seq_next+0xdb/0x210 net/core/neighbour.c:3240
seq_read+0x9cf/0x1110 fs/seq_file.c:258
proc_reg_read+0x1fc/0x2c0 fs/proc/inode.c:221
do_loop_readv_writev fs/read_write.c:714 [inline]
do_loop_readv_writev fs/read_write.c:701 [inline]
do_iter_read+0x4a4/0x660 fs/read_write.c:935
vfs_readv+0xf0/0x160 fs/read_write.c:997
kernel_readv fs/splice.c:359 [inline]
default_file_splice_read+0x475/0x890 fs/splice.c:414
do_splice_to+0x127/0x180 fs/splice.c:877
splice_direct_to_actor+0x2d2/0x970 fs/splice.c:954
do_splice_direct+0x1da/0x2a0 fs/splice.c:1063
do_sendfile+0x597/0xd00 fs/read_write.c:1464
__do_sys_sendfile64 fs/read_write.c:1525 [inline]
__se_sys_sendfile64 fs/read_write.c:1511 [inline]
__x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4592c9
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f4aab51dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000004592c9
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000246 R12: 00007f4aab51e6d4
R13: 00000000004c689d R14: 00000000004db828 R15: 00000000ffffffff

Allocated by task 9827:
save_stack+0x23/0x90 mm/kasan/common.c:71
set_track mm/kasan/common.c:79 [inline]
__kasan_kmalloc mm/kasan/common.c:489 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503
__do_kmalloc mm/slab.c:3660 [inline]
__kmalloc+0x15c/0x740 mm/slab.c:3669
kmalloc include/linux/slab.h:552 [inline]
pneigh_lookup+0x19c/0x4a0 net/core/neighbour.c:731
arp_req_set_public net/ipv4/arp.c:1010 [inline]
arp_req_set+0x613/0x720 net/ipv4/arp.c:1026
arp_ioctl+0x652/0x7f0 net/ipv4/arp.c:1226
inet_ioctl+0x2a0/0x340 net/ipv4/af_inet.c:926
sock_do_ioctl+0xd8/0x2f0 net/socket.c:1043
sock_ioctl+0x3ed/0x780 net/socket.c:1194
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 9824:
save_stack+0x23/0x90 mm/kasan/common.c:71
set_track mm/kasan/common.c:79 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:451
kasan_slab_free+0xe/0x10 mm/kasan/common.c:459
__cache_free mm/slab.c:3432 [inline]
kfree+0xcf/0x220 mm/slab.c:3755
pneigh_ifdown_and_unlock net/core/neighbour.c:812 [inline]
__neigh_ifdown+0x236/0x2f0 net/core/neighbour.c:356
neigh_ifdown+0x20/0x30 net/core/neighbour.c:372
arp_ifdown+0x1d/0x21 net/ipv4/arp.c:1274
inetdev_destroy net/ipv4/devinet.c:319 [inline]
inetdev_event+0xa14/0x11f0 net/ipv4/devinet.c:1544
notifier_call_chain+0xc2/0x230 kernel/notifier.c:95
__raw_notifier_call_chain kernel/notifier.c:396 [inline]
raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:403
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1749
call_netdevice_notifiers_extack net/core/dev.c:1761 [inline]
call_netdevice_notifiers net/core/dev.c:1775 [inline]
rollback_registered_many+0x9b9/0xfc0 net/core/dev.c:8178
rollback_registered+0x109/0x1d0 net/core/dev.c:8220
unregister_netdevice_queue net/core/dev.c:9267 [inline]
unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9260
unregister_netdevice include/linux/netdevice.h:2631 [inline]
__tun_detach+0xd8a/0x1040 drivers/net/tun.c:724
tun_detach drivers/net/tun.c:741 [inline]
tun_chr_close+0xe0/0x180 drivers/net/tun.c:3451
__fput+0x2ff/0x890 fs/file_table.c:280
____fput+0x16/0x20 fs/file_table.c:313
task_work_run+0x145/0x1c0 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:185 [inline]
exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:168
prepare_exit_to_usermode arch/x86/entry/common.c:199 [inline]
syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
do_syscall_64+0x58e/0x680 arch/x86/entry/common.c:304
entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff888097f2a700
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes inside of
64-byte region [ffff888097f2a700, ffff888097f2a740)
The buggy address belongs to the page:
page:ffffea00025fca80 refcount:1 mapcount:0 mapping:ffff8880aa400340 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea000250d548 ffffea00025726c8 ffff8880aa400340
raw: 0000000000000000 ffff888097f2a000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff888097f2a600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
ffff888097f2a680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888097f2a700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ffff888097f2a780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888097f2a800: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc

Fixes: 767e97e1e0db ("neigh: RCU conversion of struct neighbour")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: fix compile error if !CONFIG_SYSCTL

tcp_tx_skb_cache_key and tcp_rx_skb_cache_key must be available
even if CONFIG_SYSCTL is not set.

Fixes: 0b7d7f6b2208 ("tcp: add tcp_tx_skb_cache sysctl")
Fixes: ede61ca474a0 ("tcp: add tcp_rx_skb_cache sysctl")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_sock: Suppress bogus "may be used uninitialized" warnings

gcc 8.2.0 may report these bogus warnings under some condition:

warning: ‘vnew’ may be used uninitialized in this function
warning: ‘hvs_new’ may be used uninitialized in this function

Actually, the 2 pointers are only initialized and used if the variable
"conn_from_host" is true. The code is not buggy here.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Fix number of Rx queues used for flow hashing

Number of Rx queues used for flow hashing returned by the driver is
incorrect and this bug prevents user to use the last Rx queue in
indirection table.

Let's say we have a NIC with 6 combined queues:

[root@sm-03 ~]# ethtool -l enp4s0f0
Channel parameters for enp4s0f0:
Pre-set maximums:
RX:             5
TX:             5
Other:          0
Combined:       6
Current hardware settings:
RX:             0
TX:             0
Other:          0
Combined:       6

Default indirection table maps all (6) queues equally but the driver
reports only 5 rings available.

[root@sm-03 ~]# ethtool -x enp4s0f0
RX flow hash indirection table for enp4s0f0 with 5 RX ring(s):
    0:      0     1     2     3     4     5     0     1
    8:      2     3     4     5     0     1     2     3
   16:      4     5     0     1     2     3     4     5
   24:      0     1     2     3     4     5     0     1
...

Now change indirection table somehow:

[root@sm-03 ~]# ethtool -X enp4s0f0 weight 1 1
[root@sm-03 ~]# ethtool -x enp4s0f0
RX flow hash indirection table for enp4s0f0 with 6 RX ring(s):
    0:      0     0     0     0     0     0     0     0
...
   64:      1     1     1     1     1     1     1     1
...

Now it is not possible to change mapping back to equal (default) state:

[root@sm-03 ~]# ethtool -X enp4s0f0 equal 6
Cannot set RX flow hash configuration: Invalid argument

Fixes: 594ad54a2c3b ("be2net: Add support for setting and getting rx flow hash options")
Reported-by: Tianhao <tizhao@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: handle 802.1P vlan 0 packets properly

When stack receives pkt: [802.1P vlan 0][802.1AD vlan 100][IPv4],
vlan_do_receive() returns false if it does not find vlan_dev. Later
__netif_receive_skb_core() fails to find packet type handler for
skb->protocol 801.1AD and drops the packet.

801.1P header with vlan id 0 should be handled as untagged packets.
This patch fixes it by checking if vlan_id is 0 and processes next vlan
header.

Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linux 5.2-rc5

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
"The accumulated fixes from this and last week:

   - Fix vmalloc TLB flush and map range calculations which lead to
     stale TLBs, spurious faults and other hard to diagnose issues.

   - Use fault_in_pages_writable() for prefaulting the user stack in the
     FPU code as it's less fragile than the current solution

   - Use the PF_KTHREAD flag when checking for a kernel thread instead
     of current->mm as the latter can give the wrong answer due to
     use_mm()

   - Compute the vmemmap size correctly for KASLR and 5-Level paging.
     Otherwise this can end up with a way too small vmemmap area.

   - Make KASAN and 5-level paging work again by making sure that all
     invalid bits are masked out when computing the P4D offset. This
     worked before but got broken recently when the LDT remap area was
     moved.

   - Prevent a NULL pointer dereference in the resource control code
     which can be triggered with certain mount options when the
     requested resource is not available.

   - Enforce ordering of microcode loading vs. perf initialization on
     secondary CPUs. Otherwise perf tries to access a non-existing MSR
     as the boot CPU marked it as available.

   - Don't stop the resource control group walk early otherwise the
     control bitmaps are not updated correctly and become inconsistent.

   - Unbreak kgdb by returning 0 on success from
     kgdb_arch_set_breakpoint() instead of an error code.

   - Add more Icelake CPU model defines so depending changes can be
     queued in other trees"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback
  x86/kasan: Fix boot with 5-level paging and KASAN
  x86/fpu: Don't use current->mm to check for a kthread
  x86/kgdb: Return 0 from kgdb_arch_set_breakpoint()
  x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled
  x86/resctrl: Don't stop walking closids when a locksetup group is found
  x86/fpu: Update kernel's FPU state before using for the fsave header
  x86/mm/KASLR: Compute the size of the vmemmap section properly
  x86/fpu: Use fault_in_pages_writeable() for pre-faulting
  x86/CPU: Add more Icelake model numbers
  mm/vmalloc: Avoid rare case of flushing TLB with weird arguments
  mm/vmalloc: Fix calculation of direct map addr range

Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
"A set of small fixes:

   - Repair the ktime_get_coarse() functions so they actually deliver
     what they are supposed to: tick granular time stamps. The current
     code missed to add the accumulated nanoseconds part of the
     timekeeper so the resulting granularity was 1 second.

   - Prevent the tracer from infinitely recursing into time getter
     functions in the arm architectured timer by marking these functions
     notrace

   - Fix a trivial compiler warning caused by wrong qualifier ordering"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Repair ktime_get_coarse*() granularity
  clocksource/drivers/arm_arch_timer: Don't trace count reader functions
  clocksource/drivers/timer-ti-dm: Change to new style declaration

Merge branch 'ras-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull RAS fixes from Thomas Gleixner:
"Two small fixes for RAS:

   - Use a proper search algorithm to find the correct element in the
     CEC array. The replacement was a better choice than fixing the
     crash causes by the original search function with horrible duct
     tape.

   - Move the timer based decay function into thread context so it can
     actually acquire the mutex which protects the CEC array to prevent
     corruption"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  RAS/CEC: Convert the timer callback to a workqueue
  RAS/CEC: Fix binary search function

tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()

If mtu probing is enabled tcp_mtu_probing() could very well end up
with a too small MSS.

Use the new sysctl tcp_min_snd_mss to make sure MSS search
is performed in an acceptable range.

CVE-2019-11479 -- tcp mss hardcoded to 48

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: Jonathan Looney <jtl@netflix.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Bruce Curtis <brucec@netflix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: add tcp_min_snd_mss sysctl

Some TCP peers announce a very small MSS option in their SYN and/or
SYN/ACK messages.

This forces the stack to send packets with a very high network/cpu
overhead.

Linux has enforced a minimal value of 48. Since this value includes
the size of TCP options, and that the options can consume up to 40
bytes, this means that each segment can include only 8 bytes of payload.

In some cases, it can be useful to increase the minimal value
to a saner value.

We still let the default to 48 (TCP_MIN_SND_MSS), for compatibility
reasons.

Note that TCP_MAXSEG socket option enforces a minimal value
of (TCP_MIN_MSS). David Miller increased this minimal value
in commit c39508d6f118 ("tcp: Make TCP_MAXSEG minimum more correct.")
from 64 to 88.

We might in the future merge TCP_MIN_SND_MSS and TCP_MIN_MSS.

CVE-2019-11479 -- tcp mss hardcoded to 48

Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Jonathan Looney <jtl@netflix.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Bruce Curtis <brucec@netflix.com>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: tcp_fragment() should apply sane memory limits

Jonathan Looney reported that a malicious peer can force a sender
to fragment its retransmit queue into tiny skbs, inflating memory
usage and/or overflow 32bit counters.

TCP allows an application to queue up to sk_sndbuf bytes,
so we need to give some allowance for non malicious splitting
of retransmit queue.

A new SNMP counter is added to monitor how many times TCP
did not allow to split an skb if the allowance was exceeded.

Note that this counter might increase in the case applications
use SO_SNDBUF socket option to lower sk_sndbuf.

CVE-2019-11478 : tcp_fragment, prevent fragmenting a packet when the
socket is already using more than half the allowed space

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jonathan Looney <jtl@netflix.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Bruce Curtis <brucec@netflix.com>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: limit payload size of sacked skbs

Jonathan Looney reported that TCP can trigger the following crash
in tcp_shifted_skb() :

BUG_ON(tcp_skb_pcount(skb) < pcount);

This can happen if the remote peer has advertized the smallest
MSS that linux TCP accepts : 48

An skb can hold 17 fragments, and each fragment can hold 32KB
on x86, or 64KB on PowerPC.

This means that the 16bit witdh of TCP_SKB_CB(skb)->tcp_gso_segs
can overflow.

Note that tcp_sendmsg() builds skbs with less than 64KB
of payload, so this problem needs SACK to be enabled.
SACK blocks allow TCP to coalesce multiple skbs in the retransmit
queue, thus filling the 17 fragments to maximal capacity.

CVE-2019-11477 -- u16 overflow of TCP_SKB_CB(skb)->tcp_gso_segs

Fixes: 832d11c5cd07 ("tcp: Try to restore large SKBs while SACK processing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jonathan Looney <jtl@netflix.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Bruce Curtis <brucec@netflix.com>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2019-06-15

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) fix stack layout of JITed x64 bpf code, from Alexei.

2) fix out of bounds memory access in bpf_sk_storage, from Arthur.

3) fix lpm trie walk, from Jonathan.

4) fix nested bpf_perf_event_output, from Matt.

5) and several other fixes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: phylink: set the autoneg state in phylink_phy_change"

This reverts commit ef7bfa84725d891bbdb88707ed55b2cbf94942bb.

Russell King espressed some strong opposition to this
change, explaining that this is trying to make phylink
behave outside of how it has been designed.

Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: fix nested bpf tracepoints with per-cpu data

BPF_PROG_TYPE_RAW_TRACEPOINTs can be executed nested on the same CPU, as
they do not increment bpf_prog_active while executing.

This enables three levels of nesting, to support
  - a kprobe or raw tp or perf event,
  - another one of the above that irq context happens to call, and
  - another one in nmi context
(at most one of which may be a kprobe or perf event).

Fixes: 20b9d7ac4852 ("bpf: avoid excessive stack usage for perf_sample_data")
Signed-off-by: Matt Mullins <mmullins@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Fix out of bounds memory access in bpf_sk_storage

bpf_sk_storage maps use multiple spin locks to reduce contention.
The number of locks to use is determined by the number of possible CPUs.
With only 1 possible CPU, bucket_log == 0, and 2^0 = 1 locks are used.

When updating elements, the correct lock is determined with hash_ptr().
Calling hash_ptr() with 0 bits is undefined behavior, as it does:

x >> (64 - bits)

Using the value results in an out of bounds memory access.
In my case, this manifested itself as a page fault when raw_spin_lock_bh()
is called later, when running the self tests:

./tools/testing/selftests/bpf/test_verifier 773 775
[ 16.366342] BUG: unable to handle page fault for address: ffff8fe7a66f93f8

Force the minimum number of locks to two.

Signed-off-by: Arthur Fabre <afabre@cloudflare.com>
Fixes: 6ac99e8f23d4 ("bpf: Introduce bpf sk local storage")
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

vsock/virtio: set SOCK_DONE on peer shutdown

Set the SOCK_DONE flag to match the TCP_CLOSING state when a peer has
shut down and there is nothing left to read.

This fixes the following bug:
1) Peer sends SHUTDOWN(RDWR).
2) Socket enters TCP_CLOSING but SOCK_DONE is not set.
3) read() returns -ENOTCONN until close() is called, then returns 0.

Signed-off-by: Stephen Barber <smbarber@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: rtl8366: Fix up VLAN filtering

We get this regression when using RTL8366RB as part of a bridge
with OpenWrt:

WARNING: CPU: 0 PID: 1347 at net/switchdev/switchdev.c:291
switchdev_port_attr_set_now+0x80/0xa4
lan0: Commit of attribute (id=7) failed.
(...)
realtek-smi switch lan0: failed to initialize vlan filtering on this port

This is because it is trying to disable VLAN filtering
on VLAN0, as we have forgot to add 1 to the port number
to get the right VLAN in rtl8366_vlan_filtering(): when
we initialize the VLAN we associate VLAN1 with port 0,
VLAN2 with port 1 etc, so we need to add 1 to the port
offset.

Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phylink: set the autoneg state in phylink_phy_change

The phy_state field of phylink should carry only valid information
especially when this can be passed to the .mac_config callback.
Update the an_enabled field with the autoneg state in the
phylink_phy_change function.

Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'platform-drivers-x86-v5.2-3' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver fixes from Andy Shevchenko:

- fix a couple of Mellanox driver enumeration issues

- fix ASUS laptop regression with backlight

- fix Dell computers that got a wrong mode (tablet versus laptop) after
   resume

* tag 'platform-drivers-x86-v5.2-3' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flow
  platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration
  platform/x86: intel-vbtn: Report switch events when event wakes device
  platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi

Merge tag 'usb-5.2-rc5' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.2-rc5

  Nothing major, just some small gadget fixes, usb-serial new device
  ids, a few new quirks, and some small fixes for some regressions that
  have been found after the big 5.2-rc1 merge.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: Make sure an alt mode exist before getting its partner
  usb: gadget: udc: lpc32xx: fix return value check in lpc32xx_udc_probe()
  usb: gadget: dwc2: fix zlp handling
  usb: dwc2: Set actual frame number for completed ISOC transfer for none DDMA
  usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC
  usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i]
  usb: phy: mxs: Disable external charger detect in mxs_phy_hw_init()
  usb: dwc2: Fix DMA cache alignment issues
  usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression)
  USB: Fix chipmunk-like voice when using Logitech C270 for recording audio.
  USB: usb-storage: Add new ID to ums-realtek
  usb: typec: ucsi: ccg: fix memory leak in do_flash
  USB: serial: option: add Telit 0x1260 and 0x1261 compositions
  USB: serial: pl2303: add Allied Telesis VT-Kit3
  USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode

Merge tag 'powerpc-5.2-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"One fix for a regression introduced by our 32-bit KASAN support, which
  broke booting on machines with "bootx" early debugging enabled.

  A fix for a bug which broke kexec on 32-bit, introduced by changes to
  the 32-bit STRICT_KERNEL_RWX support in v5.1.

  Finally two fixes going to stable for our THP split/collapse handling,
  discovered by Nick. The first fixes random crashes and/or corruption
  in guests under sufficient load.

  Thanks to: Nicholas Piggin, Christophe Leroy, Aaro Koskinen, Mathieu
  Malaterre"

* tag 'powerpc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/32s: fix booting with CONFIG_PPC_EARLY_DEBUG_BOOTX
  powerpc/64s: __find_linux_pte() synchronization vs pmdp_invalidate()
  powerpc/64s: Fix THP PMD collapse serialisation
  powerpc: Fix kexec failure on book3s/32

Merge tag 'trace-v5.2-rc4' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:

- Out of range read of stack trace output

- Fix for NULL pointer dereference in trace_uprobe_create()

- Fix to a livepatching / ftrace permission race in the module code

- Fix for NULL pointer dereference in free_ftrace_func_mapper()

- A couple of build warning clean ups

* tag 'trace-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper()
  module: Fix livepatch/ftrace module text permissions race
  tracing/uprobe: Fix obsolete comment on trace_uprobe_create()
  tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create()
  tracing: Make two symbols static
  tracing: avoid build warning with HAVE_NOP_MCOUNT
  tracing: Fix out-of-range read in trace_stack_print()

x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback

Adric Blake reported the following warning during suspend-resume:

  Enabling non-boot CPUs ...
  x86: Booting SMP configuration:
  smpboot: Booting Node 0 Processor 1 APIC 0x2
  unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0000000000000000) \
   at rIP: 0xffffffff8d267924 (native_write_msr+0x4/0x20)
  Call Trace:
   intel_set_tfa
   intel_pmu_cpu_starting
   ? x86_pmu_dead_cpu
   x86_pmu_starting_cpu
   cpuhp_invoke_callback
   ? _raw_spin_lock_irqsave
   notify_cpu_starting
   start_secondary
   secondary_startup_64
  microcode: sig=0x806ea, pf=0x80, revision=0x96
  microcode: updated to revision 0xb4, date = 2019-04-01
  CPU1 is up

The MSR in question is MSR_TFA_RTM_FORCE_ABORT and that MSR is emulated
by microcode. The log above shows that the microcode loader callback
happens after the PMU restoration, leading to the conjecture that
because the microcode hasn't been updated yet, that MSR is not present
yet, leading to the #GP.

Add a microcode loader-specific hotplug vector which comes before
the PERF vectors and thus executes earlier and makes sure the MSR is
present.

Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort")
Reported-by: Adric Blake <promarbler14@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: x86@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203637

Merge branch 'for-5.2-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fixes from Tejun Heo:
"This has an unusually high density of tricky fixes:

   - task_get_css() could deadlock when it races against a dying cgroup.

   - cgroup.procs didn't list thread group leaders with live threads.

     This could mislead readers to think that a cgroup is empty when
     it's not. Fixed by making PROCS iterator include dead tasks. I made
     a couple mistakes making this change and this pull request contains
     a couple follow-up patches.

   - When cpusets run out of online cpus, it updates cpusmasks of member
     tasks in bizarre ways. Joel improved the behavior significantly"

* 'for-5.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: restore sanity to cpuset_cpus_allowed_fallback()
  cgroup: Fix css_task_iter_advance_css_set() cset skip condition
  cgroup: css_task_iter_skip()'d iterators must be advanced before accessed
  cgroup: Include dying leaders with live threads in PROCS iterations
  cgroup: Implement css_task_iter_skip()
  cgroup: Call cgroup_release() before __exit_signal()
  docs cgroups: add another example size for hugetlb
  cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css()

Merge tag 'drm-fixes-2019-06-14' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Daniel Vetter:
"Nothing unsettling here, also not aware of anything serious still
  pending.

  The edid override regression fix took a bit longer since this seems to
  be an area with an overabundance of bad options. But the fix we have
  now seems like a good path forward.

  Next week it should be back to Dave.

  Summary:

   - fix regression on amdgpu on SI

   - fix edid override regression

   - driver fixes: amdgpu, i915, mediatek, meson, panfrost

   - fix writecombine for vmap in gem-shmem helper (used by panfrost)

   - add more panel quirks"

* tag 'drm-fixes-2019-06-14' of git://anongit.freedesktop.org/drm/drm: (25 commits)
  drm/amdgpu: return 0 by default in amdgpu_pm_load_smu_firmware
  drm/amdgpu: Fix bounds checking in amdgpu_ras_is_supported()
  drm: add fallback override/firmware EDID modes workaround
  drm/edid: abstract override/firmware EDID retrieval
  drm/i915/perf: fix whitelist on Gen10+
  drm/i915/sdvo: Implement proper HDMI audio support for SDVO
  drm/i915: Fix per-pixel alpha with CCS
  drm/i915/dmc: protect against reading random memory
  drm/i915/dsi: Use a fuzzy check for burst mode clock check
  drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after alloc
  drm/panfrost: Require the simple_ondemand governor
  drm/panfrost: make devfreq optional again
  drm/gem_shmem: Use a writecombine mapping for ->vaddr
  drm: panel-orientation-quirks: Add quirk for GPD MicroPC
  drm: panel-orientation-quirks: Add quirk for GPD pocket2
  drm/meson: fix G12A primary plane disabling
  drm/meson: fix primary plane disabling
  drm/meson: fix G12A HDMI PLL settings for 4K60 1000/1001 variations
  drm/mediatek: call mtk_dsi_stop() after mtk_drm_crtc_atomic_disable()
  drm/mediatek: clear num_pipes when unbind driver
  ...

Merge tag 'gfs2-v5.2.fixes2' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 fix from Andreas Gruenbacher:
"Fix rounding error in gfs2_iomap_page_prepare"

* tag 'gfs2-v5.2.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix rounding error in gfs2_iomap_page_prepare

Merge branch 'tcp-add-three-static-keys'

Eric Dumazet says:

====================
tcp: add three static keys

Recent addition of per TCP socket rx/tx cache brought
regressions for some workloads, as reported by Feng Tang.

It seems better to make them opt-in, before we adopt better
heuristics.

The last patch adds high_order_alloc_disable sysctl
to ask TCP sendmsg() to exclusively use order-0 allocations,
as mm layer has specific optimizations.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: add high_order_alloc_disable sysctl/static key

>From linux-3.7, (commit 5640f7685831 "net: use a per task frag
allocator") TCP sendmsg() has preferred using order-3 allocations.

While it gives good results for most cases, we had reports
that heavy uses of TCP over loopback were hitting a spinlock
contention in page allocations/freeing.

This commits adds a sysctl so that admins can opt-in
for order-0 allocations. Hopefully mm layer might optimize
order-3 allocations in the future since it could give us
a nice boost (see 8 lines of following benchmark)

The following benchmark shows a win when more than 8 TCP_STREAM
threads are running (56 x86 cores server in my tests)

for thr in {1..30}
do
sysctl -wq net.core.high_order_alloc_disable=0
T0=`./super_netperf $thr -H 127.0.0.1 -l 15`
sysctl -wq net.core.high_order_alloc_disable=1
T1=`./super_netperf $thr -H 127.0.0.1 -l 15`
echo $thr:$T0:$T1
done

1: 49979: 37267
2: 98745: 76286
3: 141088: 110051
4: 177414: 144772
5: 197587: 173563
6: 215377: 208448
7: 241061: 234087
8: 267155: 263373
9: 295069: 297402
10: 312393: 335213
11: 340462: 368778
12: 371366: 403954
13: 412344: 443713
14: 426617: 473580
15: 474418: 507861
16: 503261: 538539
17: 522331: 563096
18: 532409: 567084
19: 550824: 605240
20: 525493: 641988
21: 564574: 665843
22: 567349: 690868
23: 583846: 710917
24: 588715: 736306
25: 603212: 763494
26: 604083: 792654
27: 602241: 796450
28: 604291: 797993
29: 611610: 833249
30: 577356: 841062

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: add tcp_tx_skb_cache sysctl

Feng Tang reported a performance regression after introduction
of per TCP socket tx/rx caches, for TCP over loopback (netperf)

There is high chance the regression is caused by a change on
how well the 32 KB per-thread page (current->task_frag) can
be recycled, and lack of pcp caches for order-3 pages.

I could not reproduce the regression myself, cpus all being
spinning on the mm spinlocks for page allocs/freeing, regardless
of enabling or disabling the per tcp socket caches.

It seems best to disable the feature by default, and let
admins enabling it.

MM layer either needs to provide scalable order-3 pages
allocations, or could attempt a trylock on zone->lock if
the caller only attempts to get a high-order page and is
able to fallback to order-0 ones in case of pressure.

Tests run on a 56 cores host (112 hyper threads)

- 35.49% netperf [kernel.vmlinux]   [k] queued_spin_lock_slowpath
   - 35.49% queued_spin_lock_slowpath
  - 18.18% get_page_from_freelist
- __alloc_pages_nodemask
- 18.18% alloc_pages_current
skb_page_frag_refill
sk_page_frag_refill
tcp_sendmsg_locked
tcp_sendmsg
inet_sendmsg
sock_sendmsg
__sys_sendto
__x64_sys_sendto
do_syscall_64
entry_SYSCALL_64_after_hwframe
__libc_send
  + 17.31% __free_pages_ok
+ 31.43% swapper [kernel.vmlinux]   [k] intel_idle
+ 9.12% netperf [kernel.vmlinux]   [k] copy_user_enhanced_fast_string
+ 6.53% netserver [kernel.vmlinux]   [k] copy_user_enhanced_fast_string
+ 0.69% netserver [kernel.vmlinux]   [k] queued_spin_lock_slowpath
+ 0.68% netperf [kernel.vmlinux]   [k] skb_release_data
+ 0.52% netperf [kernel.vmlinux]   [k] tcp_sendmsg_locked
0.46% netperf [kernel.vmlinux]   [k] _raw_spin_lock_irqsave

Fixes: 472c2e07eef0 ("tcp: add one skb cache for tx")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: add tcp_rx_skb_cache sysctl

Instead of relying on rps_needed, it is safer to use a separate
static key, since we do not want to enable TCP rx_skb_cache
by default. This feature can cause huge increase of memory
usage on hosts with millions of sockets.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sysctl: define proc_do_static_key()

Convert proc_dointvec_minmax_bpf_stats() into a more generic
helper, since we are going to use jump labels more often.

Note that sysctl_bpf_stats_enabled is removed, since
it is no longer needed/used.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: Set probe mode to sync

For better consistency of synthetic NIC names, we set the probe mode to
PROBE_FORCE_SYNCHRONOUS. So the names can be aligned with the vmbus
channel offer sequence.

Fixes: af0a5646cb8d ("use the new async probing feature for the hyperv drivers")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: flower: don't call synchronize_rcu() on mask creation

Current flower mask creating code assumes that temporary mask that is used
when inserting new filter is stack allocated. To prevent race condition
with data patch synchronize_rcu() is called every time fl_create_new_mask()
replaces temporary stack allocated mask. As reported by Jiri, this
increases runtime of creating 20000 flower classifiers from 4 seconds to
163 seconds. However, this design is no longer necessary since temporary
mask was converted to be dynamically allocated by commit 2cddd2014782
("net/sched: cls_flower: allocate mask dynamically in fl_change()").

Remove synchronize_rcu() calls from mask creation code. Instead, refactor
fl_change() to always deallocate temporary mask with rcu grace period.

Fixes: 195c234d15c9 ("net: sched: flower: handle concurrent mask insertion")
Reported-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Tested-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: fix warning same module names

When building with CONFIG_NET_DSA_REALTEK_SMI and CONFIG_REALTEK_PHY
enabled as loadable modules, we see the following warning:

warning: same module names found:
drivers/net/phy/realtek.ko
drivers/net/dsa/realtek.ko

Rework so the driver name is realtek-smi instead of realtek.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: Free cookie before we memdup a new one

Based on comments from Xin, even after fixes for our recent syzbot
report of cookie memory leaks, its possible to get a resend of an INIT
chunk which would lead to us leaking cookie memory.

To ensure that we don't leak cookie memory, free any previously
allocated cookie first.

Change notes
v1->v2
update subsystem tag in subject (davem)
repeat kfree check for peer_random and peer_hmacs (xin)

v2->v3
net->sctp
also free peer_chunks

v3->v4
fix subject tags

v4->v5
remove cut line

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com
CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
CC: Xin Long <lucien.xin@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: Don't try to read stats for unused ports

If some of the switch ports were not listed in the device tree, due to
being unused, the ksz_mib_read_work function ended up accessing a NULL
dp->slave pointer and causing an oops. Skip checking statistics for any
unused ports.

Fixes: 7c6ff470aa867f53 ("net: dsa: microchip: add MIB counter reading support")
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'qmi_wwan-fix-QMAP-handling'

Reinhard Speyerer says:

====================
qmi_wwan: fix QMAP handling

This series addresses the following issues observed when using the
QMAP support of the qmi_wwan driver:

1. The QMAP code in the qmi_wwan driver is based on the CodeAurora
   GobiNet driver ([1], [2]) which does not process QMAP padding
   in the RX path correctly. This causes qmimux_rx_fixup() to pass
   incorrect data to the IP stack when padding is used.

2. qmimux devices currently lack proper network device usage statistics.

3. RCU stalls on device disconnect with QMAP activated like this

   # echo Y > /sys/class/net/wwan0/qmi/raw_ip
   # echo 1 > /sys/class/net/wwan0/qmi/add_mux
   # echo 2 > /sys/class/net/wwan0/qmi/add_mux
   # echo 3 > /sys/class/net/wwan0/qmi/add_mux

   have been observed in certain setups:

   [ 2273.676593] option1 ttyUSB16: GSM modem (1-port) converter now disconnected from ttyUSB16
   [ 2273.676617] option 6-1.2:1.0: device disconnected
   [ 2273.676774] WARNING: CPU: 1 PID: 141 at kernel/rcu/tree_plugin.h:342 rcu_note_context_switch+0x2a/0x3d0
   [ 2273.676776] Modules linked in: option qmi_wwan cdc_mbim cdc_ncm qcserial cdc_wdm usb_wwan sierra sierra_net usbnet mii edd coretemp iptable_mangle ip6_tables iptable_filter ip_tables cdc_acm dm_mod dax iTCO_wdt evdev iTCO_vendor_support sg ftdi_sio usbserial e1000e ptp pps_core i2c_i801 ehci_pci button lpc_ich i2c_core mfd_core uhci_hcd ehci_hcd rtc_cmos usbcore usb_common sd_mod fan ata_piix thermal
   [ 2273.676817] CPU: 1 PID: 141 Comm: kworker/1:1 Not tainted 4.19.38-rsp-1 #1
   [ 2273.676819] Hardware name: Not Applicable   Not Applicable  /CX-GS/GM45-GL40             , BIOS V1.11      03/23/2011
   [ 2273.676828] Workqueue: usb_hub_wq hub_event [usbcore]
   [ 2273.676832] EIP: rcu_note_context_switch+0x2a/0x3d0
   [ 2273.676834] Code: 55 89 e5 57 56 89 c6 53 83 ec 14 89 45 f0 e8 5d ff ff ff 89 f0 64 8b 3d 24 a6 86 c0 84 c0 8b 87 04 02 00 00 75 7a 85 c0 7e 7a <0f> 0b 80 bf 08 02 00 00 00 0f 84 87 00 00 00 e8 b2 e2 ff ff bb dc
   [ 2273.676836] EAX: 00000001 EBX: f614bc00 ECX: 00000001 EDX: c0715b81
   [ 2273.676838] ESI: 00000000 EDI: f18beb40 EBP: f1a3dc20 ESP: f1a3dc00
   [ 2273.676840] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010002
   [ 2273.676842] CR0: 80050033 CR2: b7e97230 CR3: 2f9c4000 CR4: 000406b0
   [ 2273.676843] Call Trace:
   [ 2273.676847]  ? preempt_count_add+0xa5/0xc0
   [ 2273.676852]  __schedule+0x4e/0x4f0
   [ 2273.676855]  ? __queue_work+0xf1/0x2a0
   [ 2273.676858]  ? _raw_spin_lock_irqsave+0x14/0x40
   [ 2273.676860]  ? preempt_count_add+0x52/0xc0
   [ 2273.676862]  schedule+0x33/0x80
   [ 2273.676865]  _synchronize_rcu_expedited+0x24e/0x280
   [ 2273.676867]  ? rcu_accelerate_cbs_unlocked+0x70/0x70
   [ 2273.676871]  ? wait_woken+0x70/0x70
   [ 2273.676873]  ? rcu_accelerate_cbs_unlocked+0x70/0x70
   [ 2273.676875]  ? _synchronize_rcu_expedited+0x280/0x280
   [ 2273.676877]  synchronize_rcu_expedited+0x22/0x30
   [ 2273.676881]  synchronize_net+0x25/0x30
   [ 2273.676885]  dev_deactivate_many+0x133/0x230
   [ 2273.676887]  ? preempt_count_add+0xa5/0xc0
   [ 2273.676890]  __dev_close_many+0x4d/0xc0
   [ 2273.676892]  ? skb_dequeue+0x40/0x50
   [ 2273.676895]  dev_close_many+0x5d/0xd0
   [ 2273.676898]  rollback_registered_many+0xbf/0x4c0
   [ 2273.676901]  ? raw_notifier_call_chain+0x1a/0x20
   [ 2273.676904]  ? call_netdevice_notifiers_info+0x23/0x60
   [ 2273.676906]  ? netdev_master_upper_dev_get+0xe/0x70
   [ 2273.676908]  rollback_registered+0x1f/0x30
   [ 2273.676911]  unregister_netdevice_queue+0x47/0xb0
   [ 2273.676915]  qmimux_unregister_device+0x1f/0x30 [qmi_wwan]
   [ 2273.676917]  qmi_wwan_disconnect+0x5d/0x90 [qmi_wwan]
   ...
   [ 2273.677001] ---[ end trace 0fcc5f88496b485a ]---
   [ 2294.679136] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
   [ 2294.679140] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-1): P141
   [ 2294.679144] rcu: (detected by 0, t=21002 jiffies, g=265857, q=8446)
   [ 2294.679148] kworker/1:1     D    0   141      2 0x80000000

In addition the permitted QMAP mux_id value range is extended for
compatibility with ip(8) and the rmnet driver.

Reinhard

[1]: https://portland.source.codeaurora.org/patches/quic/gobi
[2]: https://portland.source.codeaurora.org/quic/qsdk/oss/lklm/gobinet/
====================

Tested-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

qmi_wwan: extend permitted QMAP mux_id value range

Permit mux_id values up to 254 to be used in qmimux_register_device()
for compatibility with ip(8) and the rmnet driver.

Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

qmi_wwan: avoid RCU stalls on device disconnect when in QMAP mode

Switch qmimux_unregister_device() and qmi_wwan_disconnect() to
use unregister_netdevice_queue() and unregister_netdevice_many()
instead of unregister_netdevice(). This avoids RCU stalls which
have been observed on device disconnect in certain setups otherwise.

Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

qmi_wwan: add network device usage statistics for qmimux devices

Add proper network device usage statistics for qmimux devices
instead of reporting all-zero values for them.

Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

qmi_wwan: add support for QMAP padding in the RX path

The QMAP code in the qmi_wwan driver is based on the CodeAurora GobiNet
driver which does not process QMAP padding in the RX path correctly.
Add support for QMAP padding to qmimux_rx_fixup() according to the
description of the rmnet driver.

Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fix from James Bottomley:
"A single bug fix for hpsa.

  The user visible consequences aren't clear, but the ioaccel2 raid
  acceleration may misfire on the malformed request assuming the payload
  is big enough to require chaining (more than 31 sg entries)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: hpsa: correct ioaccel2 chaining

Merge tag 'for-linus-20190614' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- Remove references to old schedulers for the scheduler switching and
   blkio controller documentation (Andreas)

- Kill duplicate check for report zone for null_blk (Chaitanya)

- Two bcache fixes (Coly)

- Ensure that mq-deadline is selected if zoned block device is enabled,
   as we need that to support them (Damien)

- Fix io_uring memory leak (Eric)

- ps3vram fallout from LBDAF removal (Geert)

- Redundant blk-mq debugfs debugfs_create return check cleanup (Greg)

- Extend NOPLM quirk for ST1000LM024 drives (Hans)

- Remove error path warning that can now trigger after the queue
   removal/addition fixes (Ming)

* tag 'for-linus-20190614' of git://git.kernel.dk/linux-block:
  block/ps3vram: Use %llu to format sector_t after LBDAF removal
  libata: Extend quirks for the ST1000LM024 drives with NOLPM quirk
  bcache: only set BCACHE_DEV_WB_RUNNING when cached device attached
  bcache: fix stack corruption by PRECEDING_KEY()
  blk-mq: remove WARN_ON(!q->elevator) from blk_mq_sched_free_requests
  blkio-controller.txt: Remove references to CFQ
  block/switching-sched.txt: Update to blk-mq schedulers
  null_blk: remove duplicate check for report zone
  blk-mq: no need to check return value of debugfs_create functions
  io_uring: fix memory leak of UNIX domain socket inode
  block: force select mq-deadline for zoned block devices

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"I2C has two simple but wanted driver fixes for you"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pca-platform: Fix GPIO lookup code
i2c: acorn: fix i2c warning

bpf, x64: fix stack layout of JITed bpf code

Since commit 177366bf7ceb the %rbp stopped pointing to %rbp of the
previous stack frame. That broke frame pointer based stack unwinding.
This commit is a partial revert of it.
Note that the location of tail_call_cnt is fixed, since the verifier
enforces MAX_BPF_STACK stack size for programs with tail calls.

Fixes: 177366bf7ceb ("bpf: change x86 JITed program stack layout")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Smack: Restore the smackfsdef mount option and add missing prefixes

The 5.1 mount system rework changed the smackfsdef mount option to
smackfsdefault.  This fixes the regression by making smackfsdef treated
the same way as smackfsdefault.

Also fix the smack_param_specs[] to have "smack" prefixes on all the
names.  This isn't visible to a user unless they either:

(a) Try to mount a filesystem that's converted to the internal mount API
     and that implements the ->parse_monolithic() context operation - and
     only then if they call security_fs_context_parse_param() rather than
     security_sb_eat_lsm_opts().

     There are no examples of this upstream yet, but nfs will probably want
     to do this for nfs2 or nfs3.

(b) Use fsconfig() to configure the filesystem - in which case
     security_fs_context_parse_param() will be called.

This issue is that smack_sb_eat_lsm_opts() checks for the "smack" prefix
on the options, but smack_fs_context_parse_param() does not.

Fixes: c3300aaf95fb ("smack: get rid of match_token()")
Fixes: 2febd254adc4 ("smack: Implement filesystem context security hooks")
Cc: stable@vger.kernel.org
Reported-by: Jose Bollo <jose.bollo@iot.bzh>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bpf, devmap: Add missing RCU read lock on flush

.ndo_xdp_xmit() assumes it is called under RCU. For example virtio_net
uses RCU to detect it has setup the resources for tx. The assumption
accidentally broke when introducing bulk queue in devmap.

Fixes: 5d053f9da431 ("bpf: devmap prepare xdp frames for bulking")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf, devmap: Add missing bulk queue free

dev_map_free() forgot to free bulk queue when freeing its entries.

Fixes: 5d053f9da431 ("bpf: devmap prepare xdp frames for bulking")
Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf, devmap: Fix premature entry free on destroying map

dev_map_free() waits for flush_needed bitmap to be empty in order to
ensure all flush operations have completed before freeing its entries.
However the corresponding clear_bit() was called before using the
entries, so the entries could be used after free.

All access to the entries needs to be done before clearing the bit.
It seems commit a5e2da6e9787 ("bpf: netdev is never null in
__dev_map_flush") accidentally changed the clear_bit() and memory access
order.

Note that the problem happens only in __dev_map_flush(), not in
dev_map_flush_old(). dev_map_flush_old() is called only after nulling
out the corresponding netdev_map entry, so dev_map_free() never frees
the entry thus no such race happens there.

Fixes: a5e2da6e9787 ("bpf: netdev is never null in __dev_map_flush")
Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper()

The mapper may be NULL when called from register_ftrace_function_probe()
with probe->data == NULL.

This issue can be reproduced as follow (it may be covered by compiler
optimization sometime):

/ # cat /sys/kernel/debug/tracing/set_ftrace_filter
#### all functions enabled ####
/ # echo foo_bar:dump > /sys/kernel/debug/tracing/set_ftrace_filter
[  206.949100] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[  206.952402] Mem abort info:
[  206.952819]   ESR = 0x96000006
[  206.955326]   Exception class = DABT (current EL), IL = 32 bits
[  206.955844]   SET = 0, FnV = 0
[  206.956272]   EA = 0, S1PTW = 0
[  206.956652] Data abort info:
[  206.957320]   ISV = 0, ISS = 0x00000006
[  206.959271]   CM = 0, WnR = 0
[  206.959938] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000419f3a000
[  206.960483] [0000000000000000] pgd=0000000411a87003, pud=0000000411a83003, pmd=0000000000000000
[  206.964953] Internal error: Oops: 96000006 [#1] SMP
[  206.971122] Dumping ftrace buffer:
[  206.973677]    (ftrace buffer empty)
[  206.975258] Modules linked in:
[  206.976631] Process sh (pid: 281, stack limit = 0x(____ptrval____))
[  206.978449] CPU: 10 PID: 281 Comm: sh Not tainted 5.2.0-rc1+ #17
[  206.978955] Hardware name: linux,dummy-virt (DT)
[  206.979883] pstate: 60000005 (nZCv daif -PAN -UAO)
[  206.980499] pc : free_ftrace_func_mapper+0x2c/0x118
[  206.980874] lr : ftrace_count_free+0x68/0x80
[  206.982539] sp : ffff0000182f3ab0
[  206.983102] x29: ffff0000182f3ab0 x28: ffff8003d0ec1700
[  206.983632] x27: ffff000013054b40 x26: 0000000000000001
[  206.984000] x25: ffff00001385f000 x24: 0000000000000000
[  206.984394] x23: ffff000013453000 x22: ffff000013054000
[  206.984775] x21: 0000000000000000 x20: ffff00001385fe28
[  206.986575] x19: ffff000013872c30 x18: 0000000000000000
[  206.987111] x17: 0000000000000000 x16: 0000000000000000
[  206.987491] x15: ffffffffffffffb0 x14: 0000000000000000
[  206.987850] x13: 000000000017430e x12: 0000000000000580
[  206.988251] x11: 0000000000000000 x10: cccccccccccccccc
[  206.988740] x9 : 0000000000000000 x8 : ffff000013917550
[  206.990198] x7 : ffff000012fac2e8 x6 : ffff000012fac000
[  206.991008] x5 : ffff0000103da588 x4 : 0000000000000001
[  206.991395] x3 : 0000000000000001 x2 : ffff000013872a28
[  206.991771] x1 : 0000000000000000 x0 : 0000000000000000
[  206.992557] Call trace:
[  206.993101]  free_ftrace_func_mapper+0x2c/0x118
[  206.994827]  ftrace_count_free+0x68/0x80
[  206.995238]  release_probe+0xfc/0x1d0
[  206.995555]  register_ftrace_function_probe+0x4a8/0x868
[  206.995923]  ftrace_trace_probe_callback.isra.4+0xb8/0x180
[  206.996330]  ftrace_dump_callback+0x50/0x70
[  206.996663]  ftrace_regex_write.isra.29+0x290/0x3a8
[  206.997157]  ftrace_filter_write+0x44/0x60
[  206.998971]  __vfs_write+0x64/0xf0
[  206.999285]  vfs_write+0x14c/0x2f0
[  206.999591]  ksys_write+0xbc/0x1b0
[  206.999888]  __arm64_sys_write+0x3c/0x58
[  207.000246]  el0_svc_common.constprop.0+0x408/0x5f0
[  207.000607]  el0_svc_handler+0x144/0x1c8
[  207.000916]  el0_svc+0x8/0xc
[  207.003699] Code: aa0003f8 a9025bf5 aa0103f5 f946ea80 (f9400303)
[  207.008388] ---[ end trace 7b6d11b5f542bdf1 ]---
[  207.010126] Kernel panic - not syncing: Fatal exception
[  207.011322] SMP: stopping secondary CPUs
[  207.013956] Dumping ftrace buffer:
[  207.014595]    (ftrace buffer empty)
[  207.015632] Kernel Offset: disabled
[  207.017187] CPU features: 0x002,20006008
[  207.017985] Memory Limit: none
[  207.019825] ---[ end Kernel panic - not syncing: Fatal exception ]---

Link: http://lkml.kernel.org/r/20190606031754.10798-1-liwei391@huawei.com
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

module: Fix livepatch/ftrace module text permissions race

It's possible for livepatch and ftrace to be toggling a module's text
permissions at the same time, resulting in the following panic:

  BUG: unable to handle page fault for address: ffffffffc005b1d9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0003) - permissions violation
  PGD 3ea0c067 P4D 3ea0c067 PUD 3ea0e067 PMD 3cc13067 PTE 3b8a1061
  Oops: 0003 [#1] PREEMPT SMP PTI
  CPU: 1 PID: 453 Comm: insmod Tainted: G           O  K   5.2.0-rc1-a188339ca5 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014
  RIP: 0010:apply_relocate_add+0xbe/0x14c
  Code: fa 0b 74 21 48 83 fa 18 74 38 48 83 fa 0a 75 40 eb 08 48 83 38 00 74 33 eb 53 83 38 00 75 4e 89 08 89 c8 eb 0a 83 38 00 75 43 <89> 08 48 63 c1 48 39 c8 74 2e eb 48 83 38 00 75 32 48 29 c1 89 08
  RSP: 0018:ffffb223c00dbb10 EFLAGS: 00010246
  RAX: ffffffffc005b1d9 RBX: 0000000000000000 RCX: ffffffff8b200060
  RDX: 000000000000000b RSI: 0000004b0000000b RDI: ffff96bdfcd33000
  RBP: ffffb223c00dbb38 R08: ffffffffc005d040 R09: ffffffffc005c1f0
  R10: ffff96bdfcd33c40 R11: ffff96bdfcd33b80 R12: 0000000000000018
  R13: ffffffffc005c1f0 R14: ffffffffc005e708 R15: ffffffff8b2fbc74
  FS:  00007f5f447beba8(0000) GS:ffff96bdff900000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffffffc005b1d9 CR3: 000000003cedc002 CR4: 0000000000360ea0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   klp_init_object_loaded+0x10f/0x219
   ? preempt_latency_start+0x21/0x57
   klp_enable_patch+0x662/0x809
   ? virt_to_head_page+0x3a/0x3c
   ? kfree+0x8c/0x126
   patch_init+0x2ed/0x1000 [livepatch_test02]
   ? 0xffffffffc0060000
   do_one_initcall+0x9f/0x1c5
   ? kmem_cache_alloc_trace+0xc4/0xd4
   ? do_init_module+0x27/0x210
   do_init_module+0x5f/0x210
   load_module+0x1c41/0x2290
   ? fsnotify_path+0x3b/0x42
   ? strstarts+0x2b/0x2b
   ? kernel_read+0x58/0x65
   __do_sys_finit_module+0x9f/0xc3
   ? __do_sys_finit_module+0x9f/0xc3
   __x64_sys_finit_module+0x1a/0x1c
   do_syscall_64+0x52/0x61
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

The above panic occurs when loading two modules at the same time with
ftrace enabled, where at least one of the modules is a livepatch module:

CPU0 CPU1
klp_enable_patch()
  klp_init_object_loaded()
    module_disable_ro()
     ftrace_module_enable()
  ftrace_arch_code_modify_post_process()
         set_all_modules_text_ro()
      klp_write_object_relocations()
        apply_relocate_add()
  *patches read-only code* - BOOM

A similar race exists when toggling ftrace while loading a livepatch
module.

Fix it by ensuring that the livepatch and ftrace code patching
operations -- and their respective permissions changes -- are protected
by the text_mutex.

Link: http://lkml.kernel.org/r/ab43d56ab909469ac5d2520c5d944ad6d4abd476.1560474114.git.jpoimboe@redhat.com
Reported-by: Johannes Erdfelt <johannes@erdfelt.com>
Fixes: 444d13ff10fb ("modules: add ro_after_init support")
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing/uprobe: Fix obsolete comment on trace_uprobe_create()

Commit 0597c49c69d5 ("tracing/uprobes: Use dyn_event framework for
uprobe events") cleaned up the usage of trace_uprobe_create(), and the
function has been no longer used for removing uprobe/uretprobe.

Link: http://lkml.kernel.org/r/20190614074026.8045-2-devel@etsukata.com
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create()

Just like the case of commit 8b05a3a7503c ("tracing/kprobes: Fix NULL
pointer dereference in trace_kprobe_create()"), writing an incorrectly
formatted string to uprobe_events can trigger NULL pointer dereference.

Reporeducer:

  # echo r > /sys/kernel/debug/tracing/uprobe_events

dmesg:

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 8000000079d12067 P4D 8000000079d12067 PUD 7b7ab067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP PTI
  CPU: 0 PID: 1903 Comm: bash Not tainted 5.2.0-rc3+ #15
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
  RIP: 0010:strchr+0x0/0x30
  Code: c0 eb 0d 84 c9 74 18 48 83 c0 01 48 39 d0 74 0f 0f b6 0c 07 3a 0c 06 74 ea 19 c0 83 c8 01 c3 31 c0 c3 0f 1f 84 00 00 00 00 00 <0f> b6 07 89 f2 40 38 f0 75 0e eb 13 0f b6 47 01 48 83 c
  RSP: 0018:ffffb55fc0403d10 EFLAGS: 00010293

  RAX: ffff993ffb793400 RBX: 0000000000000000 RCX: ffffffffa4852625
  RDX: 0000000000000000 RSI: 000000000000002f RDI: 0000000000000000
  RBP: ffffb55fc0403dd0 R08: ffff993ffb793400 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
  R13: ffff993ff9cc1668 R14: 0000000000000001 R15: 0000000000000000
  FS:  00007f30c5147700(0000) GS:ffff993ffda00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 000000007b628000 CR4: 00000000000006f0
  Call Trace:
   trace_uprobe_create+0xe6/0xb10
   ? __kmalloc_track_caller+0xe6/0x1c0
   ? __kmalloc+0xf0/0x1d0
   ? trace_uprobe_create+0xb10/0xb10
   create_or_delete_trace_uprobe+0x35/0x90
   ? trace_uprobe_create+0xb10/0xb10
   trace_run_command+0x9c/0xb0
   trace_parse_run_command+0xf9/0x1eb
   ? probes_open+0x80/0x80
   __vfs_write+0x43/0x90
   vfs_write+0x14a/0x2a0
   ksys_write+0xa2/0x170
   do_syscall_64+0x7f/0x200
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Link: http://lkml.kernel.org/r/20190614074026.8045-1-devel@etsukata.com
Cc: stable@vger.kernel.org
Fixes: 0597c49c69d5 ("tracing/uprobes: Use dyn_event framework for uprobe events")
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Make two symbols static

Fix sparse warnings:

kernel/trace/trace.c:6927:24: warning:
symbol 'get_tracing_log_err' was not declared. Should it be static?
kernel/trace/trace.c:8196:15: warning:
symbol 'trace_instance_dir' was not declared. Should it be static?

Link: http://lkml.kernel.org/r/20190614153210.24424-1-yuehaibing@huawei.com
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: avoid build warning with HAVE_NOP_MCOUNT

Selecting HAVE_NOP_MCOUNT enables -mnop-mcount (if gcc supports it)
and sets CC_USING_NOP_MCOUNT. Reuse __is_defined (which is suitable for
testing CC_USING_* defines) to avoid conditional compilation and fix
the following gcc 9 warning on s390:

kernel/trace/ftrace.c:2514:1: warning: ‘ftrace_code_disable’ defined
but not used [-Wunused-function]

Link: http://lkml.kernel.org/r/patch.git-1a82d13f33ac.your-ad-here.call-01559732716-ext-6629@work.hours
Fixes: 2f4df0017baed ("tracing: Add -mcount-nop option support")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Fix out-of-range read in trace_stack_print()

Puts range check before dereferencing the pointer.

Reproducer:

  # echo stacktrace > trace_options
  # echo 1 > events/enable
  # cat trace > /dev/null

KASAN report:

  ==================================================================
  BUG: KASAN: use-after-free in trace_stack_print+0x26b/0x2c0
  Read of size 8 at addr ffff888069d20000 by task cat/1953

  CPU: 0 PID: 1953 Comm: cat Not tainted 5.2.0-rc3+ #5
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
  Call Trace:
   dump_stack+0x8a/0xce
   print_address_description+0x60/0x224
   ? trace_stack_print+0x26b/0x2c0
   ? trace_stack_print+0x26b/0x2c0
   __kasan_report.cold+0x1a/0x3e
   ? trace_stack_print+0x26b/0x2c0
   kasan_report+0xe/0x20
   trace_stack_print+0x26b/0x2c0
   print_trace_line+0x6ea/0x14d0
   ? tracing_buffers_read+0x700/0x700
   ? trace_find_next_entry_inc+0x158/0x1d0
   s_show+0xea/0x310
   seq_read+0xaa7/0x10e0
   ? seq_escape+0x230/0x230
   __vfs_read+0x7c/0x100
   vfs_read+0x16c/0x3a0
   ksys_read+0x121/0x240
   ? kernel_write+0x110/0x110
   ? perf_trace_sys_enter+0x8a0/0x8a0
   ? syscall_slow_exit_work+0xa9/0x410
   do_syscall_64+0xb7/0x390
   ? prepare_exit_to_usermode+0x165/0x200
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f867681f910
  Code: b6 fe ff ff 48 8d 3d 0f be 08 00 48 83 ec 08 e8 06 db 01 00 66 0f 1f 44 00 00 83 3d f9 2d 2c 00 00 75 10 b8 00 00 00 00 04
  RSP: 002b:00007ffdabf23488 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
  RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f867681f910
  RDX: 0000000000020000 RSI: 00007f8676cde000 RDI: 0000000000000003
  RBP: 00007f8676cde000 R08: ffffffffffffffff R09: 0000000000000000
  R10: 0000000000000871 R11: 0000000000000246 R12: 00007f8676cde000
  R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000000ec0

  Allocated by task 1214:
   save_stack+0x1b/0x80
   __kasan_kmalloc.constprop.0+0xc2/0xd0
   kmem_cache_alloc+0xaf/0x1a0
   getname_flags+0xd2/0x5b0
   do_sys_open+0x277/0x5a0
   do_syscall_64+0xb7/0x390
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Freed by task 1214:
   save_stack+0x1b/0x80
   __kasan_slab_free+0x12c/0x170
   kmem_cache_free+0x8a/0x1c0
   putname+0xe1/0x120
   do_sys_open+0x2c5/0x5a0
   do_syscall_64+0xb7/0x390
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

  The buggy address belongs to the object at ffff888069d20000
   which belongs to the cache names_cache of size 4096
  The buggy address is located 0 bytes inside of
   4096-byte region [ffff888069d20000, ffff888069d21000)
  The buggy address belongs to the page:
  page:ffffea0001a74800 refcount:1 mapcount:0 mapping:ffff88806ccd1380 index:0x0 compound_mapcount: 0
  flags: 0x100000000010200(slab|head)
  raw: 0100000000010200 dead000000000100 dead000000000200 ffff88806ccd1380
  raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
  page dumped because: kasan: bad access detected

  Memory state around the buggy address:
   ffff888069d1ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   ffff888069d1ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  >ffff888069d20000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                     ^
   ffff888069d20080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
   ffff888069d20100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ==================================================================

Link: http://lkml.kernel.org/r/20190610040016.5598-1-devel@etsukata.com
Fixes: 4285f2fcef80 ("tracing: Remove the ULONG_MAX stack trace hackery")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

gfs2: Fix rounding error in gfs2_iomap_page_prepare

The pos and len arguments to the iomap page_prepare callback are not
block aligned, so we need to take that into account when computing the
number of blocks.

Fixes: d0a22a4b03b8 ("gfs2: Fix iomap write page reclaim deadlock")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Merge tag 'mac80211-for-davem-2019-06-14' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Various fixes, all over:
* a few memory leaks
* fixes for management frame protection security
and A2/A3 confusion (affecting TDLS as well)
* build fix for certificates
* etc.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: phylink: further mac_config documentation improvements

While reviewing the DPAA2 work, it has become apparent that we need
better documentation about which members of the phylink link state
structure are valid in the mac_config call. Improve this
documentation.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"Here are some arm64 fixes for -rc5.

  The only non-trivial change (in terms of the diffstat) is fixing our
  SVE ptrace API for big-endian machines, but the majority of this is
  actually the addition of much-needed comments and updates to the
  documentation to try to avoid this mess biting us again in future.

  There are still a couple of small things on the horizon, but nothing
  major at this point.

  Summary:

   - Fix broken SVE ptrace API when running in a big-endian configuration

   - Fix performance regression due to off-by-one in TLBI range checking

   - Fix build regression when using Clang"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/sve: Fix missing SVE/FPSIMD endianness conversions
  arm64: tlbflush: Ensure start/end of address range are aligned to stride
  arm64: Don't unconditionally add -Wno-psabi to KBUILD_CFLAGS

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"16 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/devm_memremap_pages: fix final page put race
  PCI/P2PDMA: track pgmap references per resource, not globally
  lib/genalloc: introduce chunk owners
  PCI/P2PDMA: fix the gen_pool_add_virt() failure path
  mm/devm_memremap_pages: introduce devm_memunmap_pages
  drivers/base/devres: introduce devm_release_action()
  mm/vmscan.c: fix trying to reclaim unevictable LRU page
  coredump: fix race condition between collapse_huge_page() and core dumping
  mm/mlock.c: change count_mm_mlocked_page_nr return type
  mm: mmu_gather: remove __tlb_reset_range() for force flush
  fs/ocfs2: fix race in ocfs2_dentry_attach_lock()
  mm/vmscan.c: fix recent_rotated history
  mm/mlock.c: mlockall error for flag MCL_ONFAULT
  scripts/decode_stacktrace.sh: prefix addr2line with $CROSS_COMPILE
  mm/list_lru.c: fix memory leak in __memcg_init_list_lru_node
  mm: memcontrol: don't batch updates of local VM stats and events

Merge branch 'drm-fixes-5.2' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

Fixes for 5.2:
- Extend previous vce fix for resume to uvd and vcn
- Fix bounds checking in ras debugfs interface
- Fix a regression on SI using amdgpu

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613021856.3307-1-alexander.deucher@amd.com

Merge tag 'iommu-fixes-v5.2-rc4' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

- three fixes for Intel VT-d to fix a potential dead-lock, a formatting
   fix and a bit setting fix

- one fix for the ARM-SMMU to make it work on some platforms with
   sub-optimal SMMU emulation

* tag 'iommu-fixes-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/arm-smmu: Avoid constant zero in TLBI writes
  iommu/vt-d: Set the right field for Page Walk Snoop
  iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock
  iommu: Add missing new line for dma type

Merge tag 'gpio-v5.2-3' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fix from Linus Walleij:
"A single fix for the PCA953x driver affecting some fringe variants of
the chip"

* tag 'gpio-v5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: hack to fix 24 bit gpio expanders

nfc: Ensure presence of required attributes in the deactivate_target handler

Check that the NFC_ATTR_TARGET_INDEX attributes (in addition to
NFC_ATTR_DEVICE_INDEX) are provided by the netlink client prior to
accessing them. This prevents potential unhandled NULL pointer dereference
exceptions which can be triggered by malicious user-mode programs,
if they omit one or both of these attributes.

Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>