Daniel Golle [Mon, 18 Jul 2016 22:27:59 +0000 (00:27 +0200)]
kernel: backport yet another cosmetic ubifs patch
On UBI-enabled devices using squashfs as their rootfs an error
message like
UBIFS error (ubi0:3 pid 1): init_constants_early: too few LEBs (12), min. is 17
was thrown while probe-mounting the rootfs which later on succeeds and
thus shouldn't alert the user.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hauke Mehrtens [Mon, 18 Jul 2016 21:12:08 +0000 (23:12 +0200)]
strace: update to version 1.12
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Daniel Golle [Mon, 18 Jul 2016 18:05:15 +0000 (20:05 +0200)]
oxnas: add kmod-ledtrig-timer to default package set
It is needed for preinit/failsafe indications to work.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 18 Jul 2016 17:37:43 +0000 (19:37 +0200)]
oxnas: use DHCP by default on ethernet interface (lan)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 18 Jul 2016 16:59:53 +0000 (18:59 +0200)]
oxnas: sync kernel config-4.1 with changes made to config-4.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 18 Jul 2016 16:45:03 +0000 (18:45 +0200)]
oxnas: add DTB for Akitio devices in patches-4.1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 18 Jul 2016 16:32:48 +0000 (18:32 +0200)]
oxnas: revert to kernel 4.1
A bug resulting in the NAND not being detected by newer kernels has
kept me sleepless for months and yet I wasn't able to discover the
cause.
Bring back patches and files for 4.1 until this has been resolved.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Mon, 18 Jul 2016 10:32:10 +0000 (12:32 +0200)]
samba36: disable local browse master by default
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 18 Jul 2016 11:36:24 +0000 (13:36 +0200)]
hostapd: fix VLAN support in full wpad builds
Suppress -DCONFIG_NO_VLAN if CONFIG_IBSS_RSN is enabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Josh Bendavid [Wed, 13 Jul 2016 09:20:37 +0000 (11:20 +0200)]
ipq806x: add patch for kernel compiler flags
Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
Josh Bendavid [Wed, 13 Jul 2016 09:20:19 +0000 (11:20 +0200)]
ipq806x: change compiler flags to arm cortex-a15
Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
Felix Fietkau [Sun, 17 Jul 2016 14:57:53 +0000 (16:57 +0200)]
feeds.conf: disable the targets feed by default
It is not actively maintained anyway
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 17 Jul 2016 10:52:42 +0000 (12:52 +0200)]
ath10k: fix stack traces from a-msdu rx reporting issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jonas Gorski [Sat, 16 Jul 2016 14:57:05 +0000 (16:57 +0200)]
scripts/getver.sh: fix older git versions from printing stuff to stdout
Older git versions seem output the original argument to stdout if there
is no upstream, presumably because they try to do things with it
internally. This can be prevented by passing --verify to it, which
should be safe on newer git versions.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jo-Philipp Wich [Sat, 16 Jul 2016 11:59:06 +0000 (13:59 +0200)]
ramips: mt7621: add missing kernel symbol
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Stephen Walker [Thu, 7 Jul 2016 00:23:15 +0000 (20:23 -0400)]
ar71xx: add software transmit timestamp support
Add software transmit timestamp and ethtool (-T) timestamp support
Signed-off-by: Stephen Walker <stephendwalker+github@gmail.com>
Felix Fietkau [Mon, 11 Jul 2016 09:38:15 +0000 (11:38 +0200)]
ath9k: implement temperature compensation support for AR93xx and newer
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 9 Jul 2016 13:31:35 +0000 (15:31 +0200)]
ath9k: use external reset on AR91xx and QCA955x to improve stability
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 9 Jul 2016 14:12:46 +0000 (16:12 +0200)]
ar71xx: define wmac reset function for QCA955x
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 11:51:49 +0000 (13:51 +0200)]
image.mk: fix append-dtb race when multiple devices use the same .dts
Call Image/BuildDTB unconditionally to keep things consistent
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 11:02:48 +0000 (13:02 +0200)]
uclibc++: fix build with gcc 6.1.0, which defaults to using C++14 ABI
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Syrone Wong [Wed, 13 Jul 2016 13:57:05 +0000 (21:57 +0800)]
toolchain/gcc: add 6.1.0
-fno-plt and musl-libc patches already get upstream, then dropped
in GCC 6. Other patches are almost identical compared to GCC 5.4.
Compile and run tested on ar71xx/Qihoo C301 and
mvebu/Linksys WRT1900ac v1
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanups/fixes]
Felix Fietkau [Thu, 14 Jul 2016 10:08:03 +0000 (12:08 +0200)]
toolchain: get rid of GCC_VERSION_5 config symbol
Replace it with !GCC_VERSION_4_8 to be more future compatible
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 10:06:39 +0000 (12:06 +0200)]
toolchain/gcc: clean up remaining references to the old linaro version
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 09:51:10 +0000 (11:51 +0200)]
toolchain/gdb: update to version 7.11.1
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 09:47:36 +0000 (11:47 +0200)]
toolchain/gdb: reorganize patch layout
Use ./patches and ./patches-arc instead of version dependent patches.
We should have only one main supported version (along with the special
case for arc).
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Syrone Wong [Wed, 13 Jul 2016 13:57:02 +0000 (21:57 +0800)]
toolchain/binutils: add 2.26.1
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [fixes/cleanup]
Syrone Wong [Wed, 13 Jul 2016 13:57:01 +0000 (21:57 +0800)]
tools/isl: bump to 0.17.1
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
Felix Fietkau [Mon, 11 Jul 2016 08:38:21 +0000 (10:38 +0200)]
ath9k: fix spectral scan on AR9285 and newer AR92xx chipsets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 11 Jul 2016 08:38:01 +0000 (10:38 +0200)]
ath9k: merge a fix for the minimum CCA threshold on 5 GHz
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 13:43:49 +0000 (15:43 +0200)]
target.mk: change CPU_CFLAGS to better suit target CPUs
-march forces the compiler to generate generic code, whereas -mcpu
allows it to target the specific CPU variant and use instructions that
the generic architecture may not have
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 13:41:22 +0000 (15:41 +0200)]
target.mk: rework arm architecture level detection
Use kernel config as input instead of -march CFLAGS.
With this change, -march can be dropped and replaced with more specific
optimization flags for better code generation.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 11:58:23 +0000 (13:58 +0200)]
image.mk: clean up redundant code related to DEVICE_DTS
It is used by a core build template, so the variable should be
initialized and added to DEVICE_VARS in the core.
Same for DEVICE_DTS_DIR
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 11:30:54 +0000 (13:30 +0200)]
scripts/getver.sh: stop relying on the reboot tag
It may not be present when cloning a staging tree or another fork
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 11:31:53 +0000 (13:31 +0200)]
mac80211: fix a harmless uninitialized variable warning
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ben Greear [Wed, 13 Jul 2016 15:16:26 +0000 (08:16 -0700)]
add ath10k-ct: Candela-Tech ath10k out-of-tree driver.
This lets one use the CT ath10k driver instead of the built-in
ath10k driver from the upstream kernel (or backports).
This should be a drop-in replacement, as well as enabling
better CT firmware support.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Rafał Miłecki [Thu, 14 Jul 2016 09:31:26 +0000 (11:31 +0200)]
bcm53xx: image: don't suppress "mv" command echoing
We call all commands normally, with standard echoing. It's useful for
debugging with V=s. Don't make lzma compression an exception, it's a bit
confusing this way.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Felix Fietkau [Fri, 8 Jul 2016 12:22:29 +0000 (14:22 +0200)]
bcm53xx: simplify image building code
Use append-ubi template for ubinize, remove mkfs override
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 8 Jul 2016 12:16:16 +0000 (14:16 +0200)]
bcm53xx: remove duplicate template data from the image makefile
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 13 Jul 2016 15:23:00 +0000 (17:23 +0200)]
image: allow devices to override the -E 5 ubinize option
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 13 Jul 2016 15:19:00 +0000 (17:19 +0200)]
image: clean up UBI related device variable definitions
Move UBI related variable export to core, since the variables are used
by a core Build/ template
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 13 Jul 2016 15:11:08 +0000 (17:11 +0200)]
ipq806x: remove obsolete UBINIZE_OPTS variables
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hauke Mehrtens [Thu, 14 Jul 2016 07:15:29 +0000 (09:15 +0200)]
mbedtls: fix missing mbedtls_time_t bug in mbedtls 2.3.0
This backports a commit from mbedtls current git which adds missing
include for platform.h.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Jul 2016 10:35:18 +0000 (12:35 +0200)]
musl: remove sh3 workaround
The GCC bug 67260 is fixed upstream now, remove this workaround.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Jul 2016 10:24:34 +0000 (12:24 +0200)]
musl: update musl to version 1.1.15
The removed patch is already integrated in upstream musl.
Add one additional patch which fixes a regression on mips.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Jul 2016 10:19:42 +0000 (12:19 +0200)]
gcc: update gcc to version 5.4.0
The removed patches are already integrated in upstream gcc.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Jul 2016 15:45:15 +0000 (17:45 +0200)]
mbedtls: update to version 2.3.0
This fixes 3 minor security problems.
SSLv3 is deactivated by default now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Jul 2016 15:44:26 +0000 (17:44 +0200)]
polarssl: update to version 1.3.17
This fixes 3 minor security problems.
SSLv3 is deactivated by default now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Álvaro Fernández Rojas [Wed, 13 Jul 2016 17:13:49 +0000 (19:13 +0200)]
dosfstools: fix build on OS X
- avoid using tools/include/endian.h on OS X to fix compilation.
- remove unneeded Host/Compile definition.
- refresh patches.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Piotr Dymacz [Fri, 8 Jul 2016 13:19:46 +0000 (15:19 +0200)]
uboot-envtools: add support for jjPlus JWAP230
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Piotr Dymacz [Fri, 8 Jul 2016 13:03:00 +0000 (15:03 +0200)]
ar71xx: add support for jjPlus JWAP230
jjPlus JWAP230 is based on Qualcomm Atheros QCA9558 + QCA8337.
Short specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 2x 10/100/1000 Mbps Ethernet
- 128 MB of RAM (DDR2)
- 16 MB of FLASH
- 3T3R 2.4 GHz with external PA (SST12LP15A), up to 28 dBm
- 3x MMCX connectors
- power input: 802.3at PoE or wide range DC (36-57 V)
- optional 802.3af PSE
- 1x mini-PCIe connector with PCIe, USB buses and SIM slot
- 1x mini-PCIe connector with PCIe bus
- 1x USB type-A connector
- 6x LED, 1x button (hardware reset)
- RS232 (MAX3223) and (E)JTAG headers
Default configuration:
- WAN on eth1 (RJ45 near LEDs with PoE input)
- LAN on eth0 (RJ45 near DC jack)
- left top LED set to be status LED
- all LEDs configurable form user space
Flash instruction (do it under U-Boot, using RS232):
1. tftp 0x80060000 lede-ar71xx-generic-jwap230-squashfs-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000"
5. saveenv && reset
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Piotr Dymacz [Fri, 8 Jul 2016 11:11:42 +0000 (13:11 +0200)]
kernel/mtd: add support for EON EN25Q128
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Piotr Dymacz [Sun, 19 Jun 2016 21:37:37 +0000 (23:37 +0200)]
uboot-envtools: add support for Wallys DR531
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Piotr Dymacz [Thu, 16 Jun 2016 16:08:03 +0000 (18:08 +0200)]
ar71xx: add support for Wallys DR531
Wallys DR531 is based on Qualcomm Atheros QCA9531 v2.
Short specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet
- 64 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz with external PA (SE2576L), up to 30 dBm
- 2x MMCX connectors
- mini-PCIe connector with PCIe/USB buses and SIM slot
- 7x LED, 1x button, 1x optional buzzer
- UART, (E)JTAG and LED headers
Default configuration:
- WAN on eth1 (RJ45 near DC jack)
- LAN on eth0 (RJ45 near button)
- S4 LED set to be status LED
- all LEDs configurable form user space
- button configured for reset
Flash instruction (do it under U-Boot, using UART):
1. tftp 0x80060000 lede-ar71xx-generic-dr531-squashfs-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000"
5. saveenv && reset
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Daniel Dickinson [Thu, 7 Jul 2016 10:45:36 +0000 (06:45 -0400)]
sdk: Allow to configure signed pacakge lists
Add option to enable signing packages lists in SDK.
Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
Felix Fietkau [Wed, 13 Jul 2016 16:34:52 +0000 (18:34 +0200)]
ar71xx: fix build error when initramfs is disabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jonas Gorski [Wed, 13 Jul 2016 14:56:41 +0000 (16:56 +0200)]
scripts/getver.sh: fix one more wc -l call
The revision to hash conversion was missed when fixing up the script.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Sat, 25 Jun 2016 13:58:35 +0000 (15:58 +0200)]
scripts/getver.sh: try to get branch/upstream automatically
Instead of assuming master is the current branch and origin the right
upstream, try to get both dynamically. If the current branch is not
tracking any upstream, use the origin of the master branch.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Hauke Mehrtens [Wed, 13 Jul 2016 10:07:08 +0000 (12:07 +0200)]
kernel: update kernel 4.4 to version 4.4.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Wed, 13 Jul 2016 11:50:03 +0000 (13:50 +0200)]
ar71xx: fix a legacy image porting issue
Get rid of remaining IMAGE_PROFILE references and move template calls
the right place
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lucian Cristian [Mon, 11 Jul 2016 23:00:16 +0000 (02:00 +0300)]
x64: add legacy IDE, fix VirtualBox bug #84 and Fujitsu Futro S550-2
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Felix Fietkau [Tue, 12 Jul 2016 10:32:54 +0000 (12:32 +0200)]
mac80211: disable fq until performance issues have been found and fixed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hans Dedecker [Tue, 12 Jul 2016 12:23:58 +0000 (14:23 +0200)]
netifd: quote vendorid and hostname variables in dhcp script
Quote hostname and vendorid variables in dhcp script so they can
hold strings having white spaces
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Felix Fietkau [Mon, 11 Jul 2016 13:53:28 +0000 (15:53 +0200)]
ath9k: explicitly clear gpio chip owner
The core can set it based on the parent device on register
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 11 Jul 2016 13:46:19 +0000 (15:46 +0200)]
ath9k: remove gpio chip owner field to fix module unloading
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 11 Jul 2016 13:10:58 +0000 (15:10 +0200)]
mac80211: fix a powersave issue in the intermediate queueing code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 11 Jul 2016 12:54:41 +0000 (14:54 +0200)]
Revert "ath9k: switch to using mac80211 intermediate software queues"
This reverts commit
31e5ed4152c4aa826641b2db6b4245a03dd553b5.
I've noticed some weird powersave related issues with this commit.
Revert until they've been fixed.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Alexey Brodkin [Fri, 8 Jul 2016 09:57:34 +0000 (12:57 +0300)]
kernel: Add upstream fix for module loading
Instead of disabling unwinding entirely this upstream patch
just disables generation of async unwind tables.
Once the patch in question lands in stable 4.4 tree this change
essentially must be removed (otherwise patch application will fail).
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Alexey Brodkin [Fri, 8 Jul 2016 09:57:33 +0000 (12:57 +0300)]
Revert "linux: arc: disable kernel unwinding to fix modules loading"
This reverts commit
acd41539d630688e9891003c9b51cace3e113316.
There's a fix in upstream that will at some point land in 4.4 stable as
well so we'll get rid of this hack and with the next commit will apply
upstream fix.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Alexey Brodkin [Thu, 7 Jul 2016 10:23:33 +0000 (13:23 +0300)]
linux/archs38: Add wireless AP capabilities similarly to axs101
Now when ath9k-htc USB dongle works with axs103 in OHCI mode
quite fine adding corresponding features to default configuration.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
John Crispin [Wed, 6 Jul 2016 08:32:07 +0000 (10:32 +0200)]
mtd-utils: merge ubi/nand-utils into one package
Signed-off-by: John Crispin <john@phrozen.org>
Kevin Darbyshire-Bryant [Wed, 6 Jul 2016 10:29:34 +0000 (11:29 +0100)]
samba: update smb template socket options defaults
Removed socket options = TCP_NODELAY IPTOS_LOWDELAY
TCP_NODELAY (disables Nagle algorithm) is default since samba2.
IPTOS_LOWDELAY sets DSCP 0x10 coding (CS2)
The alternate IPTOS_THROUGHPUT sets DSCP 0x08 coding (CS1)
CS1 is a scavenger class, whilst CS2 is more OAM/interactive
(SNMP,SSH,syslog)
Using CS2 is definitely an abuse of DSCP classification, CS1 less so
however even if the ISP takes note of DSCP codings having a default that
sets traffic to CS2 is wrong. Better to use the default Best Effort
class.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Kevin Darbyshire-Bryant [Wed, 6 Jul 2016 19:42:38 +0000 (20:42 +0100)]
iftop: fix mac address display
iftop would display portions of mac address with large ffffff prefixes.
Make if_hw_addr type consistent.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
John Crispin [Wed, 6 Jul 2016 21:12:33 +0000 (23:12 +0200)]
procd: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
Kevin Darbyshire-Bryant [Mon, 4 Jul 2016 15:15:24 +0000 (16:15 +0100)]
igmpproxy: logging options - make work & improve
Move logging command line option to uci:
option verbose [0]/1/2 - mono-syllabic/verbose/noisy
Previously handled as 'OPTIONS' in .init script however variable
was ignored so never worked.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Daniel Dickinson [Thu, 7 Jul 2016 08:24:03 +0000 (04:24 -0400)]
ar71xx: Fix PowerCloud CAP324 No Cloud title
CAP324 nocloud was missing (No-Cloud) in description
Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
Michael Lee [Wed, 6 Jul 2016 03:17:20 +0000 (11:17 +0800)]
ramips: modify audio kernel module and add dma options
* add gdma and hsdma kernel modules
* i2s support all ramips targets except rt288x
* i2s need gdma to transfer data
* add simple audio kernel module. it support device tree binding
Signed-off-by: Michael Lee <igvtee@gmail.com>
Michael Lee [Mon, 2 May 2016 03:57:40 +0000 (11:57 +0800)]
ramips: Add support for D-Link DCH-M225
D-Link DCH-M225 is based on Mediatek MT7620 with 64MB ram, 8MB flash,
3.5mm audio out support. but no ethernet and usb ports.
so you must default enable wifi.
Signed-off-by: Michael Lee <igvtee@gmail.com>
Michael Lee [Wed, 20 Apr 2016 06:30:13 +0000 (14:30 +0800)]
ramips: add MT7620 pinmux bits for mdio as refclk
The MT7620 uses a 2 bit wide configuration of the mdio.
Signed-off-by: Michael Lee <igvtee@gmail.com>
Michael Lee [Mon, 2 May 2016 03:09:50 +0000 (11:09 +0800)]
ramips: enable MTD_SPLIT_SEAMA_FW for mt7620
Signed-off-by: Michael Lee <igvtee@gmail.com>
L. D. Pinney [Thu, 7 Jul 2016 00:24:52 +0000 (19:24 -0500)]
ramips: Add support for the NixCore X1 Module
The NixCore X1 is a Ralink/MediaTek rt5350 WiFi Module.
http://nixcores.com/
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: Drew Gaylo <drew@nixcores.com>
Rene Treffer [Wed, 6 Jul 2016 08:32:19 +0000 (10:32 +0200)]
ramips: fix partition size for RT5350F-OLINUXINO
The partition size is wrong, leading to out-of-disk-space even on no/moderate use.
Upstream fix from vendor: https://github.com/OLIMEX/openwrt/commit/
2f25eb57edc79d33c4810d185c193be4293c434a
Suggested fix for openwrt: https://dev.openwrt.org/ticket/20321
Signed-off-by: Rene Treffer <treffer@measite.de>
John Crispin [Wed, 6 Jul 2016 19:42:54 +0000 (21:42 +0200)]
ramips: fix usb phy initialisation
this broke usb20 device detection.
Signed-off-by: John Crispin <john@phrozen.org>
Yousong Zhou [Sat, 9 Jul 2016 12:16:00 +0000 (20:16 +0800)]
ar71xx: base-files: remove the now unneeded 09_fix-seama-header
It was intended as a workaround when jffs2 eof mark was included in the
checksum calculation in seama header. When qihoo-c301 support was
introduced the board name was not inserted into the case list (because I
was not aware of it's existence), but the issue was fixed by excluding
the jffs2 marker as part of the checksum data
Now we are at it, drop it.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Sat, 9 Jul 2016 12:15:59 +0000 (20:15 +0800)]
ar71xx: image: fix typo in MTDPARTS def for qihoo-c301
Reported-by: Syrone Wong <wong.syrone@gmail.com>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Sat, 9 Jul 2016 12:15:58 +0000 (20:15 +0800)]
ar71xx: image: seama: fix making factory and sysupgrade image
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Sat, 9 Jul 2016 12:15:57 +0000 (20:15 +0800)]
tools: padjffs2: add option to output padding data to stdout
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Felix Fietkau [Fri, 8 Jul 2016 16:08:01 +0000 (18:08 +0200)]
ath9k: switch to using mac80211 intermediate software queues
Provides a nice latency reduction under load, due to mac80211's fq_codel
support.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 9 Jul 2016 18:00:50 +0000 (20:00 +0200)]
scripts/getver.sh: fix revision number on BSD/MacOS
Strip leading whitespace from wc -l output
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 9 Jul 2016 13:00:30 +0000 (15:00 +0200)]
ath10k: fix a compiler warning
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 8 Jul 2016 16:51:37 +0000 (18:51 +0200)]
ath10k: fix #if vs #ifdef in led trigger patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 9 Jul 2016 17:37:36 +0000 (19:37 +0200)]
mac80211: make package ath9k-common hidden
It cannot be selected independently of ath9k and ath9k-htc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Álvaro Fernández Rojas [Fri, 8 Jul 2016 07:02:27 +0000 (09:02 +0200)]
brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Thu, 7 Jul 2016 07:22:07 +0000 (09:22 +0200)]
brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Jonas Gorski [Sat, 9 Jul 2016 13:01:58 +0000 (15:01 +0200)]
scripts/getver.sh: avoid use of git rev-list --count
This is not a valid option in older git version, used in e.g. RHEL6.
Reported-by: Steven Haigh <netwiz@crc.id.au>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Sat, 9 Jul 2016 11:10:08 +0000 (13:10 +0200)]
brcm63xx: fix image generation with offsets/blocksizes != 64K
Defer the CFE_EXTRAs evaluation to allow overriden BLOCK_SIZE and
IMAGE_OFFSET take effect, and replace the unused IMAGE_SIZE with
IMAGE_OFFSET in DEVICE_VARS.
This fixes image generation for targets using different offsets or
blocksizes.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Wed, 29 Jun 2016 11:05:40 +0000 (13:05 +0200)]
brcm63xx: fix CVG834G compatible string
The CVG834G claimed to be a BCM6348, but is actually BCM3368. Since we
don't test against it, this was harmless.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Sat, 25 Jun 2016 12:23:30 +0000 (14:23 +0200)]
scripts/getver.sh: improve revision output
Change the revision output to r<upstream-revision>+<local commits> so
it is easier to get the base revision (and see if there are local
commits).
Example:
$ ./scripts/getver.sh
r794+3
$
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Sun, 5 Jun 2016 18:45:25 +0000 (20:45 +0200)]
scripts/getver.sh: allow conversion between git hash and revision
Add code allowing easy conversion between git commit ids and revisions.
Example:
$ ./scripts/getver.sh
r792
$ ./scripts/getver.sh r123
b7fc892eb56b52d25bc00578af9d1ee058dcf6b3
$ ./scrpts/getver.sh
b7fc892eb56b52d25bc00578af9d1ee058dcf6b3
r123
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Sat, 4 Jun 2016 16:35:21 +0000 (18:35 +0200)]
scripts/getver.sh: simplify revision calculation
Use git rev-list --count to get the revision number.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
projects / openwrt / staging / stintel.git / log