Linus Torvalds [Sat, 6 Apr 2019 21:52:59 +0000 (11:52 -1000)]
Merge branch 'i2c/for-current-fixed' of git://git./linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A simple but wanted driver bugfix"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: don't leak the i2c adapter on error
Linus Torvalds [Sat, 6 Apr 2019 20:59:30 +0000 (10:59 -1000)]
Merge branch 'parisc-5.1-2' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"A 32-bit boot regression fix introduced in the merge window, a QEMU
detection fix and two fixes by Sven regarding ptrace & kprobes"
* 'parisc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Detect QEMU earlier in boot process
parisc: also set iaoq_b in instruction_pointer_set()
parisc: regs_return_value() should return gpr28
Revert: parisc: Use F_EXTEND() macro in iosapic code
Helge Deller [Tue, 2 Apr 2019 10:13:27 +0000 (12:13 +0200)]
parisc: Detect QEMU earlier in boot process
While adding LASI support to QEMU, I noticed that the QEMU detection in
the kernel happens much too late. For example, when a LASI chip is found
by the kernel, it registers the LASI LED driver as well. But when we
run on QEMU it makes sense to avoid spending unnecessary CPU cycles, so
we need to access the running_on_QEMU flag earlier than before.
This patch now makes the QEMU detection the fist task of the Linux
kernel by moving it to where the kernel enters the C-coding.
Fixes: 310d82784fb4 ("parisc: qemu idle sleep support")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v4.14+
Sven Schnelle [Thu, 4 Apr 2019 16:16:04 +0000 (18:16 +0200)]
parisc: also set iaoq_b in instruction_pointer_set()
When setting the instruction pointer on PA-RISC we also need
to set the back of the instruction queue to the new offset, otherwise
we will execute on instruction from the new location, and jumping
back to the old location stored in iaoq_b.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 75ebedf1d263 ("parisc: Add HAVE_REGS_AND_STACK_ACCESS_API feature")
Cc: stable@vger.kernel.org # 4.19+
Sven Schnelle [Thu, 4 Apr 2019 16:16:03 +0000 (18:16 +0200)]
parisc: regs_return_value() should return gpr28
While working on kretprobes for PA-RISC I was wondering while the
kprobes sanity test always fails on kretprobes. This is caused by
returning gpr20 instead of gpr28.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.14+
Helge Deller [Mon, 18 Mar 2019 21:56:15 +0000 (22:56 +0100)]
Revert: parisc: Use F_EXTEND() macro in iosapic code
Revert parts of commit
97d7e2e3fd8a ("parisc: Use F_EXTEND() macro in
iosapic code"). It breaks booting the 32-bit kernel on some machines.
Reported-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Sven Schnelle <svens@stackframe.org>
Fixes: 97d7e2e3fd8a ("parisc: Use F_EXTEND() macro in iosapic code")
Signed-off-by: Helge Deller <deller@gmx.de>
Kirill Smelkov [Tue, 26 Mar 2019 22:20:43 +0000 (22:20 +0000)]
fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock
Commit
9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX") added
locking for file.f_pos access and in particular made concurrent read and
write not possible - now both those functions take f_pos lock for the
whole run, and so if e.g. a read is blocked waiting for data, write will
deadlock waiting for that read to complete.
This caused regression for stream-like files where previously read and
write could run simultaneously, but after that patch could not do so
anymore. See e.g. commit
581d21a2d02a ("xenbus: fix deadlock on writes
to /proc/xen/xenbus") which fixes such regression for particular case of
/proc/xen/xenbus.
The patch that added f_pos lock in 2014 did so to guarantee POSIX thread
safety for read/write/lseek and added the locking to file descriptors of
all regular files. In 2014 that thread-safety problem was not new as it
was already discussed earlier in 2006.
However even though 2006'th version of Linus's patch was adding f_pos
locking "only for files that are marked seekable with FMODE_LSEEK (thus
avoiding the stream-like objects like pipes and sockets)", the 2014
version - the one that actually made it into the tree as
9c225f2655e3 -
is doing so irregardless of whether a file is seekable or not.
See
https://lore.kernel.org/lkml/
53022DB1.
4070805@gmail.com/
https://lwn.net/Articles/180387
https://lwn.net/Articles/180396
for historic context.
The reason that it did so is, probably, that there are many files that
are marked non-seekable, but e.g. their read implementation actually
depends on knowing current position to correctly handle the read. Some
examples:
kernel/power/user.c snapshot_read
fs/debugfs/file.c u32_array_read
fs/fuse/control.c fuse_conn_waiting_read + ...
drivers/hwmon/asus_atk0110.c atk_debugfs_ggrp_read
arch/s390/hypfs/inode.c hypfs_read_iter
...
Despite that, many nonseekable_open users implement read and write with
pure stream semantics - they don't depend on passed ppos at all. And for
those cases where read could wait for something inside, it creates a
situation similar to xenbus - the write could be never made to go until
read is done, and read is waiting for some, potentially external, event,
for potentially unbounded time -> deadlock.
Besides xenbus, there are 14 such places in the kernel that I've found
with semantic patch (see below):
drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write()
drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write()
drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write()
drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write()
net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write()
drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write()
drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write()
drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write()
net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write()
drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write()
drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write()
drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write()
drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write()
drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write()
In addition to the cases above another regression caused by f_pos
locking is that now FUSE filesystems that implement open with
FOPEN_NONSEEKABLE flag, can no longer implement bidirectional
stream-like files - for the same reason as above e.g. read can deadlock
write locking on file.f_pos in the kernel.
FUSE's FOPEN_NONSEEKABLE was added in 2008 in
a7c1b990f715 ("fuse:
implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp
in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and
write routines not depending on current position at all, and with both
read and write being potentially blocking operations:
See
https://github.com/libfuse/osspd
https://lwn.net/Articles/308445
https://github.com/libfuse/osspd/blob/
14a9cff0/osspd.c#L1406
https://github.com/libfuse/osspd/blob/
14a9cff0/osspd.c#L1438-L1477
https://github.com/libfuse/osspd/blob/
14a9cff0/osspd.c#L1479-L1510
Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as
"somewhat pipe-like files ..." with read handler not using offset.
However that test implements only read without write and cannot exercise
the deadlock scenario:
https://github.com/libfuse/libfuse/blob/
fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131
https://github.com/libfuse/libfuse/blob/
fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163
https://github.com/libfuse/libfuse/blob/
fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216
I've actually hit the read vs write deadlock for real while implementing
my FUSE filesystem where there is /head/watch file, for which open
creates separate bidirectional socket-like stream in between filesystem
and its user with both read and write being later performed
simultaneously. And there it is semantically not easy to split the
stream into two separate read-only and write-only channels:
https://lab.nexedi.com/kirr/wendelin.core/blob/
f13aa600/wcfs/wcfs.go#L88-169
Let's fix this regression. The plan is:
1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS -
doing so would break many in-kernel nonseekable_open users which
actually use ppos in read/write handlers.
2. Add stream_open() to kernel to open stream-like non-seekable file
descriptors. Read and write on such file descriptors would never use
nor change ppos. And with that property on stream-like files read and
write will be running without taking f_pos lock - i.e. read and write
could be running simultaneously.
3. With semantic patch search and convert to stream_open all in-kernel
nonseekable_open users for which read and write actually do not
depend on ppos and where there is no other methods in file_operations
which assume @offset access.
4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via
steam_open if that bit is present in filesystem open reply.
It was tempting to change fs/fuse/ open handler to use stream_open
instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but
grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
and in particular GVFS which actually uses offset in its read and
write handlers
https://codesearch.debian.net/search?q=-%3Enonseekable+%3D
https://gitlab.gnome.org/GNOME/gvfs/blob/
1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080
https://gitlab.gnome.org/GNOME/gvfs/blob/
1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346
https://gitlab.gnome.org/GNOME/gvfs/blob/
1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481
so if we would do such a change it will break a real user.
5. Add stream_open and FOPEN_STREAM handling to stable kernels starting
from v3.14+ (the kernel where
9c225f2655 first appeared).
This will allow to patch OSSPD and other FUSE filesystems that
provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE
in their open handler and this way avoid the deadlock on all kernel
versions. This should work because fs/fuse/ ignores unknown open
flags returned from a filesystem and so passing FOPEN_STREAM to a
kernel that is not aware of this flag cannot hurt. In turn the kernel
that is not aware of FOPEN_STREAM will be < v3.14 where just
FOPEN_NONSEEKABLE is sufficient to implement streams without read vs
write deadlock.
This patch adds stream_open, converts /proc/xen/xenbus to it and adds
semantic patch to automatically locate in-kernel places that are either
required to be converted due to read vs write deadlock, or that are just
safe to be converted because read and write do not use ppos and there
are no other funky methods in file_operations.
Regarding semantic patch I've verified each generated change manually -
that it is correct to convert - and each other nonseekable_open instance
left - that it is either not correct to convert there, or that it is not
converted due to current stream_open.cocci limitations.
The script also does not convert files that should be valid to convert,
but that currently have .llseek = noop_llseek or generic_file_llseek for
unknown reason despite file being opened with nonseekable_open (e.g.
drivers/input/mousedev.c)
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yongzhi Pan <panyongzhi@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Nikolaus Rath <Nikolaus@rath.org>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 6 Apr 2019 16:26:36 +0000 (06:26 -1000)]
Merge tag 'rtc-5.1-2' of git://git./linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
- Various alarm fixes for da9063, cros-ec and sh
- sd3078 manufacturer name fix as this was introduced this cycle
* tag 'rtc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: da9063: set uie_unsupported when relevant
rtc: sd3078: fix manufacturer name
rtc: sh: Fix invalid alarm warning for non-enabled alarm
rtc: cros-ec: Fail suspend/resume if wake IRQ can't be configured
Laurentiu Tudor [Mon, 1 Apr 2019 10:14:37 +0000 (13:14 +0300)]
i2c: imx: don't leak the i2c adapter on error
Make sure to free the i2c adapter on the error exit path.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()")
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Linus Torvalds [Sat, 6 Apr 2019 03:08:55 +0000 (17:08 -1000)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"14 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kernel/sysctl.c: fix out-of-bounds access when setting file-max
mm/util.c: fix strndup_user() comment
sh: fix multiple function definition build errors
MAINTAINERS: add maintainer and replacing reviewer ARM/NUVOTON NPCM
MAINTAINERS: fix bad pattern in ARM/NUVOTON NPCM
mm: writeback: use exact memcg dirty counts
psi: clarify the units used in pressure files
mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()
hugetlbfs: fix memory leak for resv_map
mm: fix vm_fault_t cast in VM_FAULT_GET_HINDEX()
lib/lzo: fix bugs for very short or empty input
include/linux/bitrev.h: fix constant bitrev
kmemleak: powerpc: skip scanning holes in the .bss section
lib/string.c: implement a basic bcmp
Will Deacon [Sat, 6 Apr 2019 01:39:38 +0000 (18:39 -0700)]
kernel/sysctl.c: fix out-of-bounds access when setting file-max
Commit
32a5ad9c2285 ("sysctl: handle overflow for file-max") hooked up
min/max values for the file-max sysctl parameter via the .extra1 and
.extra2 fields in the corresponding struct ctl_table entry.
Unfortunately, the minimum value points at the global 'zero' variable,
which is an int. This results in a KASAN splat when accessed as a long
by proc_doulongvec_minmax on 64-bit architectures:
| BUG: KASAN: global-out-of-bounds in __do_proc_doulongvec_minmax+0x5d8/0x6a0
| Read of size 8 at addr
ffff2000133d1c20 by task systemd/1
|
| CPU: 0 PID: 1 Comm: systemd Not tainted
5.1.0-rc3-00012-g40b114779944 #2
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0x0/0x228
| show_stack+0x14/0x20
| dump_stack+0xe8/0x124
| print_address_description+0x60/0x258
| kasan_report+0x140/0x1a0
| __asan_report_load8_noabort+0x18/0x20
| __do_proc_doulongvec_minmax+0x5d8/0x6a0
| proc_doulongvec_minmax+0x4c/0x78
| proc_sys_call_handler.isra.19+0x144/0x1d8
| proc_sys_write+0x34/0x58
| __vfs_write+0x54/0xe8
| vfs_write+0x124/0x3c0
| ksys_write+0xbc/0x168
| __arm64_sys_write+0x68/0x98
| el0_svc_common+0x100/0x258
| el0_svc_handler+0x48/0xc0
| el0_svc+0x8/0xc
|
| The buggy address belongs to the variable:
| zero+0x0/0x40
|
| Memory state around the buggy address:
|
ffff2000133d1b00: 00 00 00 00 00 00 00 00 fa fa fa fa 04 fa fa fa
|
ffff2000133d1b80: fa fa fa fa 04 fa fa fa fa fa fa fa 04 fa fa fa
| >
ffff2000133d1c00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00
| ^
|
ffff2000133d1c80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00
|
ffff2000133d1d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Fix the splat by introducing a unsigned long 'zero_ul' and using that
instead.
Link: http://lkml.kernel.org/r/20190403153409.17307-1-will.deacon@arm.com
Fixes: 32a5ad9c2285 ("sysctl: handle overflow for file-max")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Christian Brauner <christian@brauner.io>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Sat, 6 Apr 2019 01:39:34 +0000 (18:39 -0700)]
mm/util.c: fix strndup_user() comment
The kerneldoc misdescribes strndup_user()'s return value.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Timur Tabi <timur@freescale.com>
Cc: Mihai Caraman <mihai.caraman@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sat, 6 Apr 2019 01:39:30 +0000 (18:39 -0700)]
sh: fix multiple function definition build errors
Many of the sh CPU-types have their own plat_irq_setup() and
arch_init_clk_ops() functions, so these same (empty) functions in
arch/sh/boards/of-generic.c are not needed and cause build errors.
If there is some case where these empty functions are needed, they can
be retained by marking them as "__weak" while at the same time making
builds that do not need them succeed.
Fixes these build errors:
arch/sh/boards/of-generic.o: In function `plat_irq_setup':
(.init.text+0x134): multiple definition of `plat_irq_setup'
arch/sh/kernel/cpu/sh2/setup-sh7619.o:(.init.text+0x30): first defined here
arch/sh/boards/of-generic.o: In function `arch_init_clk_ops':
(.init.text+0x118): multiple definition of `arch_init_clk_ops'
arch/sh/kernel/cpu/sh2/clock-sh7619.o:(.init.text+0x0): first defined here
Link: http://lkml.kernel.org/r/9ee4e0c5-f100-86a2-bd4d-1d3287ceab31@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tomer Maimon [Sat, 6 Apr 2019 01:39:26 +0000 (18:39 -0700)]
MAINTAINERS: add maintainer and replacing reviewer ARM/NUVOTON NPCM
Add Tali Perry as Nuvoton NPCM maintainer, replace Brendan Higgins
Nuvoton NPCM reviewer with Benjamin Fair.
Link: http://lkml.kernel.org/r/20190328235752.334462-2-tmaimon77@gmail.com
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Joe Perches <joe@perches.com>
Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Patrick Venture <venture@google.com>
Cc: Nancy Yuen <yuenn@google.com>
Cc: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tomer Maimon [Sat, 6 Apr 2019 01:39:22 +0000 (18:39 -0700)]
MAINTAINERS: fix bad pattern in ARM/NUVOTON NPCM
In the process of upstreaming architecture support for ARM/NUVOTON NPCM
include/dt-bindings/clock/nuvoton,npcm7xx-clks.h was renamed
include/dt-bindings/clock/nuvoton,npcm7xx-clock.h without updating
MAINTAINERS. This updates the MAINTAINERS pattern to match the new name
of this file.
Link: http://lkml.kernel.org/r/20190328235752.334462-1-tmaimon77@gmail.com
Fixes: 6a498e06ba22 ("MAINTAINERS: Add entry for the Nuvoton NPCM architecture")
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reported-by: Joe Perches <joe@perches.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Mukesh Ojha <mojha@codeaurora.org>
Cc: Nancy Yuen <yuenn@google.com>
Cc: Patrick Venture <venture@google.com>
Cc: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Thelen [Sat, 6 Apr 2019 01:39:18 +0000 (18:39 -0700)]
mm: writeback: use exact memcg dirty counts
Since commit
a983b5ebee57 ("mm: memcontrol: fix excessive complexity in
memory.stat reporting") memcg dirty and writeback counters are managed
as:
1) per-memcg per-cpu values in range of [-32..32]
2) per-memcg atomic counter
When a per-cpu counter cannot fit in [-32..32] it's flushed to the
atomic. Stat readers only check the atomic. Thus readers such as
balance_dirty_pages() may see a nontrivial error margin: 32 pages per
cpu.
Assuming 100 cpus:
4k x86 page_size: 13 MiB error per memcg
64k ppc page_size: 200 MiB error per memcg
Considering that dirty+writeback are used together for some decisions the
errors double.
This inaccuracy can lead to undeserved oom kills. One nasty case is
when all per-cpu counters hold positive values offsetting an atomic
negative value (i.e. per_cpu[*]=32, atomic=n_cpu*-32).
balance_dirty_pages() only consults the atomic and does not consider
throttling the next n_cpu*32 dirty pages. If the file_lru is in the
13..200 MiB range then there's absolutely no dirty throttling, which
burdens vmscan with only dirty+writeback pages thus resorting to oom
kill.
It could be argued that tiny containers are not supported, but it's more
subtle. It's the amount the space available for file lru that matters.
If a container has memory.max-200MiB of non reclaimable memory, then it
will also suffer such oom kills on a 100 cpu machine.
The following test reliably ooms without this patch. This patch avoids
oom kills.
$ cat test
mount -t cgroup2 none /dev/cgroup
cd /dev/cgroup
echo +io +memory > cgroup.subtree_control
mkdir test
cd test
echo 10M > memory.max
(echo $BASHPID > cgroup.procs && exec /memcg-writeback-stress /foo)
(echo $BASHPID > cgroup.procs && exec dd if=/dev/zero of=/foo bs=2M count=100)
$ cat memcg-writeback-stress.c
/*
* Dirty pages from all but one cpu.
* Clean pages from the non dirtying cpu.
* This is to stress per cpu counter imbalance.
* On a 100 cpu machine:
* - per memcg per cpu dirty count is 32 pages for each of 99 cpus
* - per memcg atomic is -99*32 pages
* - thus the complete dirty limit: sum of all counters 0
* - balance_dirty_pages() only sees atomic count -99*32 pages, which
* it max()s to 0.
* - So a workload can dirty -99*32 pages before balance_dirty_pages()
* cares.
*/
#define _GNU_SOURCE
#include <err.h>
#include <fcntl.h>
#include <sched.h>
#include <stdlib.h>
#include <stdio.h>
#include <sys/stat.h>
#include <sys/sysinfo.h>
#include <sys/types.h>
#include <unistd.h>
static char *buf;
static int bufSize;
static void set_affinity(int cpu)
{
cpu_set_t affinity;
CPU_ZERO(&affinity);
CPU_SET(cpu, &affinity);
if (sched_setaffinity(0, sizeof(affinity), &affinity))
err(1, "sched_setaffinity");
}
static void dirty_on(int output_fd, int cpu)
{
int i, wrote;
set_affinity(cpu);
for (i = 0; i < 32; i++) {
for (wrote = 0; wrote < bufSize; ) {
int ret = write(output_fd, buf+wrote, bufSize-wrote);
if (ret == -1)
err(1, "write");
wrote += ret;
}
}
}
int main(int argc, char **argv)
{
int cpu, flush_cpu = 1, output_fd;
const char *output;
if (argc != 2)
errx(1, "usage: output_file");
output = argv[1];
bufSize = getpagesize();
buf = malloc(getpagesize());
if (buf == NULL)
errx(1, "malloc failed");
output_fd = open(output, O_CREAT|O_RDWR);
if (output_fd == -1)
err(1, "open(%s)", output);
for (cpu = 0; cpu < get_nprocs(); cpu++) {
if (cpu != flush_cpu)
dirty_on(output_fd, cpu);
}
set_affinity(flush_cpu);
if (fsync(output_fd))
err(1, "fsync(%s)", output);
if (close(output_fd))
err(1, "close(%s)", output);
free(buf);
}
Make balance_dirty_pages() and wb_over_bg_thresh() work harder to
collect exact per memcg counters. This avoids the aforementioned oom
kills.
This does not affect the overhead of memory.stat, which still reads the
single atomic counter.
Why not use percpu_counter? memcg already handles cpus going offline, so
no need for that overhead from percpu_counter. And the percpu_counter
spinlocks are more heavyweight than is required.
It probably also makes sense to use exact dirty and writeback counters
in memcg oom reports. But that is saved for later.
Link: http://lkml.kernel.org/r/20190329174609.164344-1-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org> [4.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Waiman Long [Sat, 6 Apr 2019 01:39:14 +0000 (18:39 -0700)]
psi: clarify the units used in pressure files
The output of the PSI files show a bunch of numbers with no unit. The
psi.txt documentation file also does not indicate what units are used.
One can only find out by looking at the source code. The units are
percentage for the averages and useconds for the total. Make the
information easier to find by documenting the units in psi.txt.
Link: http://lkml.kernel.org/r/20190402193810.3450-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aneesh Kumar K.V [Sat, 6 Apr 2019 01:39:10 +0000 (18:39 -0700)]
mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()
With some architectures like ppc64, set_pmd_at() cannot cope with a
situation where there is already some (different) valid entry present.
Use pmdp_set_access_flags() instead to modify the pfn which is built to
deal with modifying existing PMD entries.
This is similar to commit
cae85cb8add3 ("mm/memory.c: fix modifying of
page protection by insert_pfn()")
We also do similar update w.r.t insert_pfn_pud eventhough ppc64 don't
support pud pfn entries now.
Without this patch we also see the below message in kernel log "BUG:
non-zero pgtables_bytes on freeing mm:"
Link: http://lkml.kernel.org/r/20190402115125.18803-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Chandan Rajendra <chandan@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Kravetz [Sat, 6 Apr 2019 01:39:06 +0000 (18:39 -0700)]
hugetlbfs: fix memory leak for resv_map
When mknod is used to create a block special file in hugetlbfs, it will
allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc().
inode->i_mapping->private_data will point the newly allocated resv_map.
However, when the device special file is opened bd_acquire() will set
inode->i_mapping to bd_inode->i_mapping. Thus the pointer to the
allocated resv_map is lost and the structure is leaked.
Programs to reproduce:
mount -t hugetlbfs nodev hugetlbfs
mknod hugetlbfs/dev b 0 0
exec 30<> hugetlbfs/dev
umount hugetlbfs/
resv_map structures are only needed for inodes which can have associated
page allocations. To fix the leak, only allocate resv_map for those
inodes which could possibly be associated with page allocations.
Link: http://lkml.kernel.org/r/20190401213101.16476-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Yufen Yu <yuyufen@huawei.com>
Suggested-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jann Horn [Sat, 6 Apr 2019 01:39:01 +0000 (18:39 -0700)]
mm: fix vm_fault_t cast in VM_FAULT_GET_HINDEX()
Symmetrically to VM_FAULT_SET_HINDEX(), we need a force-cast in
VM_FAULT_GET_HINDEX() to tell sparse that this is intentional.
Sparse complains about the current code when building a kernel with
CONFIG_MEMORY_FAILURE:
arch/x86/mm/fault.c:1058:53: warning: restricted vm_fault_t degrades to integer
Link: http://lkml.kernel.org/r/20190327204117.35215-1-jannh@google.com
Fixes: 3d3539018d2c ("mm: create the new vm_fault_t type")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Rodgman [Sat, 6 Apr 2019 01:38:58 +0000 (18:38 -0700)]
lib/lzo: fix bugs for very short or empty input
For very short input data (0 - 1 bytes), lzo-rle was not behaving
correctly. Fix this behaviour and update documentation accordingly.
For zero-length input, lzo v0 outputs an end-of-stream marker only,
which was misinterpreted by lzo-rle as a bitstream version number.
Ensure bitstream versions > 0 require a minimum stream length of 5.
Also fixes a bug in handling the tail for very short inputs when a
bitstream version is present.
Link: http://lkml.kernel.org/r/20190326165857.34613-1-dave.rodgman@arm.com
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Sat, 6 Apr 2019 01:38:53 +0000 (18:38 -0700)]
include/linux/bitrev.h: fix constant bitrev
clang points out with hundreds of warnings that the bitrev macros have a
problem with constant input:
drivers/hwmon/sht15.c:187:11: error: variable '__x' is uninitialized when used within its own initialization
[-Werror,-Wuninitialized]
u8 crc = bitrev8(data->val_status & 0x0F);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/bitrev.h:102:21: note: expanded from macro 'bitrev8'
__constant_bitrev8(__x) : \
~~~~~~~~~~~~~~~~~~~^~~~
include/linux/bitrev.h:67:11: note: expanded from macro '__constant_bitrev8'
u8 __x = x; \
~~~ ^
Both the bitrev and the __constant_bitrev macros use an internal
variable named __x, which goes horribly wrong when passing one to the
other.
The obvious fix is to rename one of the variables, so this adds an extra
'_'.
It seems we got away with this because
- there are only a few drivers using bitrev macros
- usually there are no constant arguments to those
- when they are constant, they tend to be either 0 or (unsigned)-1
(drivers/isdn/i4l/isdnhdlc.o, drivers/iio/amplifiers/ad8366.c) and
give the correct result by pure chance.
In fact, the only driver that I could find that gets different results
with this is drivers/net/wan/slic_ds26522.c, which in turn is a driver
for fairly rare hardware (adding the maintainer to Cc for testing).
Link: http://lkml.kernel.org/r/20190322140503.123580-1-arnd@arndb.de
Fixes: 556d2f055bf6 ("ARM: 8187/1: add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Cc: Yalin Wang <yalin.wang@sonymobile.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Catalin Marinas [Sat, 6 Apr 2019 01:38:49 +0000 (18:38 -0700)]
kmemleak: powerpc: skip scanning holes in the .bss section
Commit
2d4f567103ff ("KVM: PPC: Introduce kvm_tmp framework") adds
kvm_tmp[] into the .bss section and then free the rest of unused spaces
back to the page allocator.
kernel_init
kvm_guest_init
kvm_free_tmp
free_reserved_area
free_unref_page
free_unref_page_prepare
With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel. As the
result, kmemleak scan will trigger a panic when it scans the .bss
section with unmapped pages.
This patch creates dedicated kmemleak objects for the .data, .bss and
potentially .data..ro_after_init sections to allow partial freeing via
the kmemleak_free_part() in the powerpc kvm_free_tmp() function.
Link: http://lkml.kernel.org/r/20190321171917.62049-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Qian Cai <cai@lca.pw>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Desaulniers [Sat, 6 Apr 2019 01:38:45 +0000 (18:38 -0700)]
lib/string.c: implement a basic bcmp
A recent optimization in Clang (r355672) lowers comparisons of the
return value of memcmp against zero to comparisons of the return value
of bcmp against zero. This helps some platforms that implement bcmp
more efficiently than memcmp. glibc simply aliases bcmp to memcmp, but
an optimized implementation is in the works.
This results in linkage failures for all targets with Clang due to the
undefined symbol. For now, just implement bcmp as a tailcail to memcmp
to unbreak the build. This routine can be further optimized in the
future.
Other ideas discussed:
* A weak alias was discussed, but breaks for architectures that define
their own implementations of memcmp since aliases to declarations are
not permitted (only definitions). Arch-specific memcmp
implementations typically declare memcmp in C headers, but implement
them in assembly.
* -ffreestanding also is used sporadically throughout the kernel.
* -fno-builtin-bcmp doesn't work when doing LTO.
Link: https://bugs.llvm.org/show_bug.cgi?id=41035
Link: https://code.woboq.org/userspace/glibc/string/memcmp.c.html#bcmp
Link: https://github.com/llvm/llvm-project/commit/8e16d73346f8091461319a7dfc4ddd18eedcff13
Link: https://github.com/ClangBuiltLinux/linux/issues/416
Link: http://lkml.kernel.org/r/20190313211335.165605-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: James Y Knight <jyknight@google.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 6 Apr 2019 01:34:33 +0000 (15:34 -1000)]
Merge tag 'for-5.1/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Two queue_limits stacking fixes: disable discards if underlying
driver does. And propagate BDI_CAP_STABLE_WRITES to fix sporadic
checksum errors.
- Fix that reverts a DM core limit that wasn't needed given that
dm-crypt was already updated to impose an equivalent limit.
- Fix dm-init to properly establish 'const' for __initconst array.
- Fix deadlock in DM integrity target that occurs when overlapping IO
is being issued to it. And two smaller fixes to the DM integrity
target.
* tag 'for-5.1/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: fix deadlock with overlapping I/O
dm: disable DISCARD if the underlying storage no longer supports it
dm table: propagate BDI_CAP_STABLE_WRITES to fix sporadic checksum errors
dm: revert
8f50e358153d ("dm: limit the max bio size as BIO_MAX_PAGES * PAGE_SIZE")
dm init: fix const confusion for dm_allowed_targets array
dm integrity: make dm_integrity_init and dm_integrity_exit static
dm integrity: change memcmp to strncmp in dm_integrity_ctr
Linus Torvalds [Sat, 6 Apr 2019 01:07:28 +0000 (15:07 -1000)]
Merge tag 'vfio-v5.1-rc4' of git://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Fix clang printk format errors (Louis Taylor)
- Declare structure static to fix sparse warning (Wang Hai)
- Limit user DMA mappings per container (CVE-2019-3882) (Alex
Williamson)
* tag 'vfio-v5.1-rc4' of git://github.com/awilliam/linux-vfio:
vfio/type1: Limit DMA mappings per container
vfio/spapr_tce: Make symbol 'tce_iommu_driver_ops' static
vfio/pci: use correct format characters
Linus Torvalds [Fri, 5 Apr 2019 23:43:07 +0000 (13:43 -1000)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86 fixes for overflows and other nastiness"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: nVMX: fix x2APIC VTPR read intercept
KVM: x86: nVMX: close leak of L0's x2APIC MSRs (CVE-2019-3887)
KVM: SVM: prevent DBG_DECRYPT and DBG_ENCRYPT overflow
kvm: svm: fix potential get_num_contig_pages overflow
Linus Torvalds [Fri, 5 Apr 2019 23:36:45 +0000 (13:36 -1000)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix unwind_frame() in the context of pseudo NMI"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fix wrong check of on_sdei_stack in nmi context
Linus Torvalds [Fri, 5 Apr 2019 23:15:57 +0000 (13:15 -1000)]
Merge tag 'trace-5.1-rc3' of git://git./linux/kernel/git/rostedt/linux-trace
Pull syscall-get-arguments cleanup and fixes from Steven Rostedt:
"Andy Lutomirski approached me to tell me that the
syscall_get_arguments() implementation in x86 was horrible and gcc
certainly gets it wrong.
He said that since the tracepoints only pass in 0 and 6 for i and n
repectively, it should be optimized for that case. Inspecting the
kernel, I discovered that all users pass in 0 for i and only one file
passing in something other than 6 for the number of arguments. That
code happens to be my own code used for the special syscall tracing.
That can easily be converted to just using 0 and 6 as well, and only
copying what is needed. Which is probably the faster path anyway for
that case.
Along the way, a couple of real fixes came from this as the
syscall_get_arguments() function was incorrect for csky and riscv.
x86 has been optimized to for the new interface that removes the
variable number of arguments, but the other architectures could still
use some loving and take more advantage of the simpler interface"
* tag 'trace-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
syscalls: Remove start and number from syscall_set_arguments() args
syscalls: Remove start and number from syscall_get_arguments() args
csky: Fix syscall_get_arguments() and syscall_set_arguments()
riscv: Fix syscall_get_arguments() and syscall_set_arguments()
tracing/syscalls: Pass in hardcoded 6 into syscall_get_arguments()
ptrace: Remove maxargs from task_current_syscall()
Mikulas Patocka [Fri, 5 Apr 2019 19:26:39 +0000 (15:26 -0400)]
dm integrity: fix deadlock with overlapping I/O
dm-integrity will deadlock if overlapping I/O is issued to it, the bug
was introduced by commit
724376a04d1a ("dm integrity: implement fair
range locks"). Users rarely use overlapping I/O so this bug went
undetected until now.
Fix this bug by correcting, likely cut-n-paste, typos in
ranges_overlap() and also remove a flawed ranges_overlap() check in
remove_range_unlocked(). This condition could leave unprocessed bios
hanging on wait_list forever.
Cc: stable@vger.kernel.org # v4.19+
Fixes: 724376a04d1a ("dm integrity: implement fair range locks")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Marc Orr [Tue, 2 Apr 2019 06:56:00 +0000 (23:56 -0700)]
KVM: x86: nVMX: fix x2APIC VTPR read intercept
Referring to the "VIRTUALIZING MSR-BASED APIC ACCESSES" chapter of the
SDM, when "virtualize x2APIC mode" is 1 and "APIC-register
virtualization" is 0, a RDMSR of 808H should return the VTPR from the
virtual APIC page.
However, for nested, KVM currently fails to disable the read intercept
for this MSR. This means that a RDMSR exit takes precedence over
"virtualize x2APIC mode", and KVM passes through L1's TPR to L2,
instead of sourcing the value from L2's virtual APIC page.
This patch fixes the issue by disabling the read intercept, in VMCS02,
for the VTPR when "APIC-register virtualization" is 0.
The issue described above and fix prescribed here, were verified with
a related patch in kvm-unit-tests titled "Test VMX's virtualize x2APIC
mode w/ nested".
Signed-off-by: Marc Orr <marcorr@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Fixes: c992384bde84f ("KVM: vmx: speed up MSR bitmap merge")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marc Orr [Tue, 2 Apr 2019 06:55:59 +0000 (23:55 -0700)]
KVM: x86: nVMX: close leak of L0's x2APIC MSRs (CVE-2019-3887)
The nested_vmx_prepare_msr_bitmap() function doesn't directly guard the
x2APIC MSR intercepts with the "virtualize x2APIC mode" MSR. As a
result, we discovered the potential for a buggy or malicious L1 to get
access to L0's x2APIC MSRs, via an L2, as follows.
1. L1 executes WRMSR(IA32_SPEC_CTRL, 1). This causes the spec_ctrl
variable, in nested_vmx_prepare_msr_bitmap() to become true.
2. L1 disables "virtualize x2APIC mode" in VMCS12.
3. L1 enables "APIC-register virtualization" in VMCS12.
Now, KVM will set VMCS02's x2APIC MSR intercepts from VMCS12, and then
set "virtualize x2APIC mode" to 0 in VMCS02. Oops.
This patch closes the leak by explicitly guarding VMCS02's x2APIC MSR
intercepts with VMCS12's "virtualize x2APIC mode" control.
The scenario outlined above and fix prescribed here, were verified with
a related patch in kvm-unit-tests titled "Add leak scenario to
virt_x2apic_mode_test".
Note, it looks like this issue may have been introduced inadvertently
during a merge---see
15303ba5d1cd.
Signed-off-by: Marc Orr <marcorr@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Rientjes [Mon, 25 Mar 2019 18:47:31 +0000 (11:47 -0700)]
KVM: SVM: prevent DBG_DECRYPT and DBG_ENCRYPT overflow
This ensures that the address and length provided to DBG_DECRYPT and
DBG_ENCRYPT do not cause an overflow.
At the same time, pass the actual number of pages pinned in memory to
sev_unpin_memory() as a cleanup.
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Rientjes [Tue, 19 Mar 2019 22:19:56 +0000 (15:19 -0700)]
kvm: svm: fix potential get_num_contig_pages overflow
get_num_contig_pages() could potentially overflow int so make its type
consistent with its usage.
Reported-by: Cfir Cohen <cfir@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Fri, 5 Apr 2019 16:09:53 +0000 (06:09 -1000)]
Merge tag 'mm-compaction-5.1-rc4' of git://git./linux/kernel/git/mel/linux
Pull mm/compaction fixes from Mel Gorman:
"The merge window for 5.1 introduced a number of compaction-related
patches. with intermittent reports of corruption and functional
issues. The bugs are due to sloopy checking of zone boundaries and a
corner case where invalid indexes are used to access the free lists.
Reports are not common but at least two users and 0-day have tripped
over them. There is a chance that one of the syzbot reports are
related but it has not been confirmed properly.
The normal submission path is with Andrew but there have been some
delays and I consider them urgent enough that they should be picked up
before RC4 to avoid duplicate reports.
All of these have been successfully tested on older RC windows. This
will make this branch look like a rebase but in fact, they've simply
been lifted again from Andrew's tree and placed on a fresh branch.
I've no reason to believe that this has invalidated the testing given
the lack of change in compaction and the nature of the fixes"
* tag 'mm-compaction-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux:
mm/compaction.c: abort search if isolation fails
mm/compaction.c: correct zone boundary handling when resetting pageblock skip hints
Greg Kroah-Hartman [Fri, 5 Apr 2019 13:39:26 +0000 (15:39 +0200)]
tty: mark Siemens R3964 line discipline as BROKEN
The n_r3964 line discipline driver was written in a different time, when
SMP machines were rare, and users were trusted to do the right thing.
Since then, the world has moved on but not this code, it has stayed
rooted in the past with its lovely hand-crafted list structures and
loads of "interesting" race conditions all over the place.
After attempting to clean up most of the issues, I just gave up and am
now marking the driver as BROKEN so that hopefully someone who has this
hardware will show up out of the woodwork (I know you are out there!)
and will help with debugging a raft of changes that I had laying around
for the code, but was too afraid to commit as odds are they would break
things.
Many thanks to Jann and Linus for pointing out the initial problems in
this codebase, as well as many reviews of my attempts to fix the issues.
It was a case of whack-a-mole, and as you can see, the mole won.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Rostedt (VMware) [Thu, 28 Mar 2019 00:07:31 +0000 (20:07 -0400)]
syscalls: Remove start and number from syscall_set_arguments() args
After removing the start and count arguments of syscall_get_arguments() it
seems reasonable to remove them from syscall_set_arguments(). Note, as of
today, there are no users of syscall_set_arguments(). But we are told that
there will be soon. But for now, at least make it consistent with
syscall_get_arguments().
Link: http://lkml.kernel.org/r/20190327222014.GA32540@altlinux.org
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Dave Martin <dave.martin@arm.com>
Cc: "Dmitry V. Levin" <ldv@altlinux.org>
Cc: x86@kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: nios2-dev@lists.rocketboards.org
Cc: openrisc@lists.librecores.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-arch@vger.kernel.org
Acked-by: Max Filippov <jcmvbkbc@gmail.com> # For xtensa changes
Acked-by: Will Deacon <will.deacon@arm.com> # For the arm64 bits
Reviewed-by: Thomas Gleixner <tglx@linutronix.de> # for x86
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (Red Hat) [Mon, 7 Nov 2016 21:26:37 +0000 (16:26 -0500)]
syscalls: Remove start and number from syscall_get_arguments() args
At Linux Plumbers, Andy Lutomirski approached me and pointed out that the
function call syscall_get_arguments() implemented in x86 was horribly
written and not optimized for the standard case of passing in 0 and 6 for
the starting index and the number of system calls to get. When looking at
all the users of this function, I discovered that all instances pass in only
0 and 6 for these arguments. Instead of having this function handle
different cases that are never used, simply rewrite it to return the first 6
arguments of a system call.
This should help out the performance of tracing system calls by ptrace,
ftrace and perf.
Link: http://lkml.kernel.org/r/20161107213233.754809394@goodmis.org
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Dave Martin <dave.martin@arm.com>
Cc: "Dmitry V. Levin" <ldv@altlinux.org>
Cc: x86@kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: nios2-dev@lists.rocketboards.org
Cc: openrisc@lists.librecores.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-arch@vger.kernel.org
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts
Acked-by: Max Filippov <jcmvbkbc@gmail.com> # For xtensa changes
Acked-by: Will Deacon <will.deacon@arm.com> # For the arm64 bits
Reviewed-by: Thomas Gleixner <tglx@linutronix.de> # for x86
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Fri, 5 Apr 2019 04:22:55 +0000 (18:22 -1000)]
Merge tag 'drm-fixes-2019-04-05' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Pretty quiet week, just some amdgpu and i915 fixes.
i915:
- deadlock fix
- gvt fixes
amdgpu:
- PCIE dpm feature fix
- Powerplay fixes"
* tag 'drm-fixes-2019-04-05' of git://anongit.freedesktop.org/drm/drm:
drm/i915/gvt: Fix kerneldoc typo for intel_vgpu_emulate_hotplug
drm/i915/gvt: Correct the calculation of plane size
drm/amdgpu: remove unnecessary rlc reset function on gfx9
drm/i915: Always backoff after a drm_modeset_lock() deadlock
drm/i915/gvt: do not let pin count of shadow mm go negative
drm/i915/gvt: do not deliver a workload if its creation fails
drm/amd/display: VBIOS can't be light up HDMI when restart system
drm/amd/powerplay: fix possible hang with 3+ 4K monitors
drm/amd/powerplay: correct data type to avoid overflow
drm/amd/powerplay: add ECC feature bit
drm/amd/amdgpu: fix PCIe dpm feature issue (v3)
Linus Torvalds [Fri, 5 Apr 2019 04:07:12 +0000 (18:07 -1000)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Several hash table refcount fixes in batman-adv, from Sven
Eckelmann.
2) Use after free in bpf_evict_inode(), from Daniel Borkmann.
3) Fix mdio bus registration in ixgbe, from Ivan Vecera.
4) Unbounded loop in __skb_try_recv_datagram(), from Paolo Abeni.
5) ila rhashtable corruption fix from Herbert Xu.
6) Don't allow upper-devices to be added to vrf devices, from Sabrina
Dubroca.
7) Add qmi_wwan device ID for Olicard 600, from Bjørn Mork.
8) Don't leave skb->next poisoned in __netif_receive_skb_list_ptype,
from Alexander Lobakin.
9) Missing IDR checks in mlx5 driver, from Aditya Pakki.
10) Fix false connection termination in ktls, from Jakub Kicinski.
11) Work around some ASPM issues with r8169 by disabling rx interrupt
coalescing on certain chips. From Heiner Kallweit.
12) Properly use per-cpu qstat values on NOLOCK qdiscs, from Paolo
Abeni.
13) Fully initialize sockaddr_in structures in SCTP, from Xin Long.
14) Various BPF flow dissector fixes from Stanislav Fomichev.
15) Divide by zero in act_sample, from Davide Caratti.
16) Fix bridging multicast regression introduced by rhashtable
conversion, from Nikolay Aleksandrov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
ibmvnic: Fix completion structure initialization
ipv6: sit: reset ip header pointer in ipip6_rcv
net: bridge: always clear mcast matching struct on reports and leaves
libcxgb: fix incorrect ppmax calculation
vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x
sch_cake: Make sure we can write the IP header before changing DSCP bits
sch_cake: Use tc_skb_protocol() helper for getting packet protocol
tcp: Ensure DCTCP reacts to losses
net/sched: act_sample: fix divide by zero in the traffic path
net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stop
net: hns: Fix sparse: some warnings in HNS drivers
net: hns: Fix WARNING when remove HNS driver with SMMU enabled
net: hns: fix ICMP6 neighbor solicitation messages discard problem
net: hns: Fix probabilistic memory overwrite when HNS driver initialized
net: hns: Use NAPI_POLL_WEIGHT for hns driver
net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()
flow_dissector: rst'ify documentation
ipv6: Fix dangling pointer when ipv6 fragment
net-gro: Fix GRO flush when receiving a GSO packet.
flow_dissector: document BPF flow dissector environment
...
Thomas Falcon [Thu, 4 Apr 2019 23:58:26 +0000 (18:58 -0500)]
ibmvnic: Fix completion structure initialization
Fix device initialization completion handling for vNIC adapters.
Initialize the completion structure on probe and reinitialize when needed.
This also fixes a race condition during kdump where the driver can attempt
to access the completion struct before it is initialized:
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc0000000081acbe0
Oops: Kernel access of bad area, sig: 11 [#1]
LE SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: ibmvnic(+) ibmveth sunrpc overlay squashfs loop
CPU: 19 PID: 301 Comm: systemd-udevd Not tainted 4.18.0-64.el8.ppc64le #1
NIP:
c0000000081acbe0 LR:
c0000000081ad964 CTR:
c0000000081ad900
REGS:
c000000027f3f990 TRAP: 0300 Not tainted (4.18.0-64.el8.ppc64le)
MSR:
800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR:
28228288 XER:
00000006
CFAR:
c000000008008934 DAR:
0000000000000000 DSISR:
40000000 IRQMASK: 1
GPR00:
c0000000081ad964 c000000027f3fc10 c0000000095b5800 c0000000221b4e58
GPR04:
0000000000000003 0000000000000001 000049a086918581 00000000000000d4
GPR08:
0000000000000007 0000000000000000 ffffffffffffffe8 d0000000014dde28
GPR12:
c0000000081ad900 c000000009a00c00 0000000000000001 0000000000000100
GPR16:
0000000000000038 0000000000000007 c0000000095e2230 0000000000000006
GPR20:
0000000000400140 0000000000000001 c00000000910c880 0000000000000000
GPR24:
0000000000000000 0000000000000006 0000000000000000 0000000000000003
GPR28:
0000000000000001 0000000000000001 c0000000221b4e60 c0000000221b4e58
NIP [
c0000000081acbe0] __wake_up_locked+0x50/0x100
LR [
c0000000081ad964] complete+0x64/0xa0
Call Trace:
[
c000000027f3fc10] [
c000000027f3fc60] 0xc000000027f3fc60 (unreliable)
[
c000000027f3fc60] [
c0000000081ad964] complete+0x64/0xa0
[
c000000027f3fca0] [
d0000000014dad58] ibmvnic_handle_crq+0xce0/0x1160 [ibmvnic]
[
c000000027f3fd50] [
d0000000014db270] ibmvnic_tasklet+0x98/0x130 [ibmvnic]
[
c000000027f3fda0] [
c00000000813f334] tasklet_action_common.isra.3+0xc4/0x1a0
[
c000000027f3fe00] [
c000000008cd13f4] __do_softirq+0x164/0x400
[
c000000027f3fef0] [
c00000000813ed64] irq_exit+0x184/0x1c0
[
c000000027f3ff20] [
c0000000080188e8] __do_irq+0xb8/0x210
[
c000000027f3ff90] [
c00000000802d0a4] call_do_irq+0x14/0x24
[
c000000026a5b010] [
c000000008018adc] do_IRQ+0x9c/0x130
[
c000000026a5b060] [
c000000008008ce4] hardware_interrupt_common+0x114/0x120
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Thu, 4 Apr 2019 14:37:53 +0000 (16:37 +0200)]
ipv6: sit: reset ip header pointer in ipip6_rcv
ipip6 tunnels run iptunnel_pull_header on received skbs. This can
determine the following use-after-free accessing iph pointer since
the packet will be 'uncloned' running pskb_expand_head if it is a
cloned gso skb (e.g if the packet has been sent though a veth device)
[ 706.369655] BUG: KASAN: use-after-free in ipip6_rcv+0x1678/0x16e0 [sit]
[ 706.449056] Read of size 1 at addr
ffffe01b6bd855f5 by task ksoftirqd/1/=
[ 706.669494] Hardware name: HPE ProLiant m400 Server/ProLiant m400 Server, BIOS U02 08/19/2016
[ 706.771839] Call trace:
[ 706.801159] dump_backtrace+0x0/0x2f8
[ 706.845079] show_stack+0x24/0x30
[ 706.884833] dump_stack+0xe0/0x11c
[ 706.925629] print_address_description+0x68/0x260
[ 706.982070] kasan_report+0x178/0x340
[ 707.025995] __asan_report_load1_noabort+0x30/0x40
[ 707.083481] ipip6_rcv+0x1678/0x16e0 [sit]
[ 707.132623] tunnel64_rcv+0xd4/0x200 [tunnel4]
[ 707.185940] ip_local_deliver_finish+0x3b8/0x988
[ 707.241338] ip_local_deliver+0x144/0x470
[ 707.289436] ip_rcv_finish+0x43c/0x14b0
[ 707.335447] ip_rcv+0x628/0x1138
[ 707.374151] __netif_receive_skb_core+0x1670/0x2600
[ 707.432680] __netif_receive_skb+0x28/0x190
[ 707.482859] process_backlog+0x1d0/0x610
[ 707.529913] net_rx_action+0x37c/0xf68
[ 707.574882] __do_softirq+0x288/0x1018
[ 707.619852] run_ksoftirqd+0x70/0xa8
[ 707.662734] smpboot_thread_fn+0x3a4/0x9e8
[ 707.711875] kthread+0x2c8/0x350
[ 707.750583] ret_from_fork+0x10/0x18
[ 707.811302] Allocated by task 16982:
[ 707.854182] kasan_kmalloc.part.1+0x40/0x108
[ 707.905405] kasan_kmalloc+0xb4/0xc8
[ 707.948291] kasan_slab_alloc+0x14/0x20
[ 707.994309] __kmalloc_node_track_caller+0x158/0x5e0
[ 708.053902] __kmalloc_reserve.isra.8+0x54/0xe0
[ 708.108280] __alloc_skb+0xd8/0x400
[ 708.150139] sk_stream_alloc_skb+0xa4/0x638
[ 708.200346] tcp_sendmsg_locked+0x818/0x2b90
[ 708.251581] tcp_sendmsg+0x40/0x60
[ 708.292376] inet_sendmsg+0xf0/0x520
[ 708.335259] sock_sendmsg+0xac/0xf8
[ 708.377096] sock_write_iter+0x1c0/0x2c0
[ 708.424154] new_sync_write+0x358/0x4a8
[ 708.470162] __vfs_write+0xc4/0xf8
[ 708.510950] vfs_write+0x12c/0x3d0
[ 708.551739] ksys_write+0xcc/0x178
[ 708.592533] __arm64_sys_write+0x70/0xa0
[ 708.639593] el0_svc_handler+0x13c/0x298
[ 708.686646] el0_svc+0x8/0xc
[ 708.739019] Freed by task 17:
[ 708.774597] __kasan_slab_free+0x114/0x228
[ 708.823736] kasan_slab_free+0x10/0x18
[ 708.868703] kfree+0x100/0x3d8
[ 708.905320] skb_free_head+0x7c/0x98
[ 708.948204] skb_release_data+0x320/0x490
[ 708.996301] pskb_expand_head+0x60c/0x970
[ 709.044399] __iptunnel_pull_header+0x3b8/0x5d0
[ 709.098770] ipip6_rcv+0x41c/0x16e0 [sit]
[ 709.146873] tunnel64_rcv+0xd4/0x200 [tunnel4]
[ 709.200195] ip_local_deliver_finish+0x3b8/0x988
[ 709.255596] ip_local_deliver+0x144/0x470
[ 709.303692] ip_rcv_finish+0x43c/0x14b0
[ 709.349705] ip_rcv+0x628/0x1138
[ 709.388413] __netif_receive_skb_core+0x1670/0x2600
[ 709.446943] __netif_receive_skb+0x28/0x190
[ 709.497120] process_backlog+0x1d0/0x610
[ 709.544169] net_rx_action+0x37c/0xf68
[ 709.589131] __do_softirq+0x288/0x1018
[ 709.651938] The buggy address belongs to the object at
ffffe01b6bd85580
which belongs to the cache kmalloc-1024 of size 1024
[ 709.804356] The buggy address is located 117 bytes inside of
1024-byte region [
ffffe01b6bd85580,
ffffe01b6bd85980)
[ 709.946340] The buggy address belongs to the page:
[ 710.003824] page:
ffff7ff806daf600 count:1 mapcount:0 mapping:
ffffe01c4001f600 index:0x0
[ 710.099914] flags: 0xfffff8000000100(slab)
[ 710.149059] raw:
0fffff8000000100 dead000000000100 dead000000000200 ffffe01c4001f600
[ 710.242011] raw:
0000000000000000 0000000000380038 00000001ffffffff 0000000000000000
[ 710.334966] page dumped because: kasan: bad access detected
Fix it resetting iph pointer after iptunnel_pull_header
Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap")
Tested-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 5 Apr 2019 01:04:00 +0000 (15:04 -1000)]
Merge tag 'riscv-for-linus-5.1-rc4' of git://git./linux/kernel/git/palmer/riscv-linux
Pull RISC-V fixes from Palmer Dabbelt:
"I dropped the ball a bit here: these patches should all probably have
been part of rc2, but I wanted to get around to properly testing them
in the various configurations (qemu32, qeum64, unleashed) first.
Unfortunately I've been traveling and didn't have time to actually do
that, but since these fix concrete bugs and pass my old set of tests I
don't want to delay the fixes any longer.
There are four independent fixes here:
- A fix for the rv32 port that corrects the 64-bit user accesor's
fixup label address.
- A fix for a regression introduced during the merge window that
broke medlow configurations at run time. This patch also includes a
fix that disables ftrace for the same set of functions, which was
found by inspection at the same time.
- A modification of the memory map to avoid overlapping the FIXMAP
and VMALLOC regions on systems with small memory maps.
- A fix to the module handling code to use the correct syntax for
probing Kconfig entries.
These have passed my standard test flow, but I didn't have time to
expand that testing like I said I would"
* tag 'riscv-for-linus-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: Use IS_ENABLED(CONFIG_CMODEL_MEDLOW)
RISC-V: Fix FIXMAP_TOP to avoid overlap with VMALLOC area
RISC-V: Always compile mm/init.c with cmodel=medany and notrace
riscv: fix accessing 8-byte variable from RV32
Nikolay Aleksandrov [Wed, 3 Apr 2019 20:27:24 +0000 (23:27 +0300)]
net: bridge: always clear mcast matching struct on reports and leaves
We need to be careful and always zero the whole br_ip struct when it is
used for matching since the rhashtable change. This patch fixes all the
places which didn't properly clear it which in turn might've caused
mismatches.
Thanks for the great bug report with reproducing steps and bisection.
Steps to reproduce (from the bug report):
ip link add br0 type bridge mcast_querier 1
ip link set br0 up
ip link add v2 type veth peer name v3
ip link set v2 master br0
ip link set v2 up
ip link set v3 up
ip addr add 3.0.0.2/24 dev v3
ip netns add test
ip link add v1 type veth peer name v1 netns test
ip link set v1 master br0
ip link set v1 up
ip -n test link set v1 up
ip -n test addr add 3.0.0.1/24 dev v1
# Multicast receiver
ip netns exec test socat
UDP4-RECVFROM:5588,ip-add-membership=224.224.224.224:3.0.0.1,fork -
# Multicast sender
echo hello | nc -u -s 3.0.0.2 224.224.224.224 5588
Reported-by: liam.mcbirnie@boeing.com
Fixes: 19e3a9c90c53 ("net: bridge: convert multicast to generic rhashtable")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 5 Apr 2019 00:52:08 +0000 (14:52 -1000)]
Merge tag 'pm-5.1-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix up the intel_pstate driver after recent changes to prevent
it from printing pointless messages and update the turbostat utility
(mostly fixes and new hardware support).
Specifics:
- Make intel_pstate only load on Intel processors and prevent it from
printing pointless failure messages (Borislav Petkov).
- Update the turbostat utility:
* Assorted fixes (Ben Hutchings, Len Brown, Prarit Bhargava).
* Support for AMD Fam 17h (Zen) RAPL and package power (Calvin
Walton).
* Support for Intel Icelake and for systems with more than one die
per package (Len Brown).
* Cleanups (Len Brown)"
* tag 'pm-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/intel_pstate: Load only on Intel hardware
tools/power turbostat: update version number
tools/power turbostat: Warn on bad ACPI LPIT data
tools/power turbostat: Add checks for failure of fgets() and fscanf()
tools/power turbostat: Also read package power on AMD F17h (Zen)
tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL
tools/power turbostat: Do not display an error on systems without a cpufreq driver
tools/power turbostat: Add Die column
tools/power turbostat: Add Icelake support
tools/power turbostat: Cleanup CNL-specific code
tools/power turbostat: Cleanup CC3-skip code
tools/power turbostat: Restore ability to execute in topology-order
Linus Torvalds [Fri, 5 Apr 2019 00:48:11 +0000 (14:48 -1000)]
Merge tag 'acpi-5.1-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Prevent stale GPE events from triggering spurious system wakeups from
suspend-to-idle (Furquan Shaikh)"
* tag 'acpi-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Clear status of GPEs before enabling them
Dave Airlie [Fri, 5 Apr 2019 00:45:27 +0000 (10:45 +1000)]
Merge tag 'drm-intel-fixes-2019-04-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Only one fix for DSC (backoff after drm_modeset_lock deadlock)
and GVT's fixes including vGPU display plane size calculation,
shadow mm pin count, error recovery path for workload create
and one kerneldoc fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404161116.GA14522@intel.com
Linus Torvalds [Fri, 5 Apr 2019 00:42:47 +0000 (14:42 -1000)]
Merge tag 'mfd-fixes-5.1' of git://git./linux/kernel/git/lee/mfd
Pull mfd fixes from Lee Jones:
- Fix failed reads due to enabled IRQs when suspended; twl-core
- Fix driver registration when using DT; sprd-sc27xx-spi
- Fix `make allyesconfig` on x86_64; SUN6I_PRCM
* tag 'mfd-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: sun6i-prcm: Allow to compile with COMPILE_TEST
mfd: sc27xx: Use SoC compatible string for PMIC devices
mfd: twl-core: Disable IRQ while suspended
Dave Airlie [Fri, 5 Apr 2019 00:42:08 +0000 (10:42 +1000)]
Merge branch 'drm-fixes-5.1' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Fixes for 5.1:
- Fix for pcie dpm
- Powerplay fixes for vega20
- Fix vbios display on reboot if driver display state is retained
- Gfx9 resume robustness fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404042939.3386-1-alexander.deucher@amd.com
Varun Prakash [Wed, 3 Apr 2019 12:00:14 +0000 (17:30 +0530)]
libcxgb: fix incorrect ppmax calculation
BITS_TO_LONGS() uses DIV_ROUND_UP() because of
this ppmax value can be greater than available
per cpu page pods.
This patch removes BITS_TO_LONGS() to fix this
issue.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Leech [Tue, 2 Apr 2019 22:06:12 +0000 (15:06 -0700)]
vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x
Way back in
3c9c36bcedd426f2be2826da43e5163de61735f7 the
ndo_fcoe_get_wwn pointer was switched from depending on CONFIG_FCOE to
CONFIG_LIBFCOE in order to allow building FCoE support into the bnx2x
driver and used by bnx2fc without including the generic software fcoe
module.
But, FCoE is generally used over an 802.1q VLAN, and the implementation
of ndo_fcoe_get_wwn in the 8021q module was not similarly changed. The
result is that if CONFIG_FCOE is disabled, then bnz2fc cannot make a
call to ndo_fcoe_get_wwn through the 8021q interface to the underlying
bnx2x interface. The bnx2fc driver then falls back to a potentially
different mapping of Ethernet MAC to Fibre Channel WWN, creating an
incompatibility with the fabric and target configurations when compared
to the WWNs used by pre-boot firmware and differently-configured
kernels.
So make the conditional inclusion of FCoE code in 8021q match the
conditional inclusion in netdevice.h
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 4 Apr 2019 20:30:55 +0000 (13:30 -0700)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2019-04-04
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Batch of fixes to the existing BPF flow dissector API to support
calling BPF programs from the eth_get_headlen context (support for
latter is planned to be added in bpf-next), from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafael J. Wysocki [Thu, 4 Apr 2019 20:08:47 +0000 (22:08 +0200)]
Merge branch 'acpica' into acpi
* acpica:
ACPICA: Clear status of GPEs before enabling them
Rafael J. Wysocki [Thu, 4 Apr 2019 19:57:45 +0000 (21:57 +0200)]
Merge branch 'pm-tools'
* pm-tools:
tools/power turbostat: update version number
tools/power turbostat: Warn on bad ACPI LPIT data
tools/power turbostat: Add checks for failure of fgets() and fscanf()
tools/power turbostat: Also read package power on AMD F17h (Zen)
tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL
tools/power turbostat: Do not display an error on systems without a cpufreq driver
tools/power turbostat: Add Die column
tools/power turbostat: Add Icelake support
tools/power turbostat: Cleanup CNL-specific code
tools/power turbostat: Cleanup CC3-skip code
tools/power turbostat: Restore ability to execute in topology-order
Mike Snitzer [Wed, 3 Apr 2019 16:23:11 +0000 (12:23 -0400)]
dm: disable DISCARD if the underlying storage no longer supports it
Storage devices which report supporting discard commands like
WRITE_SAME_16 with unmap, but reject discard commands sent to the
storage device. This is a clear storage firmware bug but it doesn't
change the fact that should a program cause discards to be sent to a
multipath device layered on this buggy storage, all paths can end up
failed at the same time from the discards, causing possible I/O loss.
The first discard to a path will fail with Illegal Request, Invalid
field in cdb, e.g.:
kernel: sd 8:0:8:19: [sdfn] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
kernel: sd 8:0:8:19: [sdfn] tag#0 Sense Key : Illegal Request [current]
kernel: sd 8:0:8:19: [sdfn] tag#0 Add. Sense: Invalid field in cdb
kernel: sd 8:0:8:19: [sdfn] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 a0 08 00 00 00 80 00 00 00
kernel: blk_update_request: critical target error, dev sdfn, sector
10487808
The SCSI layer converts this to the BLK_STS_TARGET error number, the sd
device disables its support for discard on this path, and because of the
BLK_STS_TARGET error multipath fails the discard without failing any
path or retrying down a different path. But subsequent discards can
cause path failures. Any discards sent to the path which already failed
a discard ends up failing with EIO from blk_cloned_rq_check_limits with
an "over max size limit" error since the discard limit was set to 0 by
the sd driver for the path. As the error is EIO, this now fails the
path and multipath tries to send the discard down the next path. This
cycle continues as discards are sent until all paths fail.
Fix this by training DM core to disable DISCARD if the underlying
storage already did so.
Also, fix branching in dm_done() and clone_endio() to reflect the
mutually exclussive nature of the IO operations in question.
Cc: stable@vger.kernel.org
Reported-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
David S. Miller [Thu, 4 Apr 2019 17:55:59 +0000 (10:55 -0700)]
Merge branch 'sch_cake-fixes'
Toke Høiland-Jørgensen says:
====================
sched: A few small fixes for sch_cake
Kevin noticed a few issues with the way CAKE reads the skb protocol and the IP
diffserv fields. This series fixes those two issues, and should probably go to
in 4.19 as well. However, the previous refactoring patch means they don't apply
as-is; I can send a follow-up directly to stable if that's OK with you?
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Thu, 4 Apr 2019 13:01:33 +0000 (15:01 +0200)]
sch_cake: Make sure we can write the IP header before changing DSCP bits
There is not actually any guarantee that the IP headers are valid before we
access the DSCP bits of the packets. Fix this using the same approach taken
in sch_dsmark.
Reported-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Thu, 4 Apr 2019 13:01:33 +0000 (15:01 +0200)]
sch_cake: Use tc_skb_protocol() helper for getting packet protocol
We shouldn't be using skb->protocol directly as that will miss cases with
hardware-accelerated VLAN tags. Use the helper instead to get the right
protocol number.
Reported-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Koen De Schepper [Thu, 4 Apr 2019 12:24:02 +0000 (12:24 +0000)]
tcp: Ensure DCTCP reacts to losses
RFC8257 §3.5 explicitly states that "A DCTCP sender MUST react to
loss episodes in the same way as conventional TCP".
Currently, Linux DCTCP performs no cwnd reduction when losses
are encountered. Optionally, the dctcp_clamp_alpha_on_loss resets
alpha to its maximal value if a RTO happens. This behavior
is sub-optimal for at least two reasons: i) it ignores losses
triggering fast retransmissions; and ii) it causes unnecessary large
cwnd reduction in the future if the loss was isolated as it resets
the historical term of DCTCP's alpha EWMA to its maximal value (i.e.,
denoting a total congestion). The second reason has an especially
noticeable effect when using DCTCP in high BDP environments, where
alpha normally stays at low values.
This patch replace the clamping of alpha by setting ssthresh to
half of cwnd for both fast retransmissions and RTOs, at most once
per RTT. Consequently, the dctcp_clamp_alpha_on_loss module parameter
has been removed.
The table below shows experimental results where we measured the
drop probability of a PIE AQM (not applying ECN marks) at a
bottleneck in the presence of a single TCP flow with either the
alpha-clamping option enabled or the cwnd halving proposed by this
patch. Results using reno or cubic are given for comparison.
| Link | RTT | Drop
TCP CC | speed | base+AQM | probability
==================|=========|==========|============
CUBIC | 40Mbps | 7+20ms | 0.21%
RENO | | | 0.19%
DCTCP-CLAMP-ALPHA | | | 25.80%
DCTCP-HALVE-CWND | | | 0.22%
------------------|---------|----------|------------
CUBIC | 100Mbps | 7+20ms | 0.03%
RENO | | | 0.02%
DCTCP-CLAMP-ALPHA | | | 23.30%
DCTCP-HALVE-CWND | | | 0.04%
------------------|---------|----------|------------
CUBIC | 800Mbps | 1+1ms | 0.04%
RENO | | | 0.05%
DCTCP-CLAMP-ALPHA | | | 18.70%
DCTCP-HALVE-CWND | | | 0.06%
We see that, without halving its cwnd for all source of losses,
DCTCP drives the AQM to large drop probabilities in order to keep
the queue length under control (i.e., it repeatedly faces RTOs).
Instead, if DCTCP reacts to all source of losses, it can then be
controlled by the AQM using similar drop levels than cubic or reno.
Signed-off-by: Koen De Schepper <koen.de_schepper@nokia-bell-labs.com>
Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com>
Cc: Bob Briscoe <research@bobbriscoe.net>
Cc: Lawrence Brakmo <brakmo@fb.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Daniel Borkmann <borkmann@iogearbox.net>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Andrew Shewmaker <agshew@gmail.com>
Cc: Glenn Judd <glenn.judd@morganstanley.com>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Thu, 4 Apr 2019 10:31:35 +0000 (12:31 +0200)]
net/sched: act_sample: fix divide by zero in the traffic path
the control path of 'sample' action does not validate the value of 'rate'
provided by the user, but then it uses it as divisor in the traffic path.
Validate it in tcf_sample_init(), and return -EINVAL with a proper extack
message in case that value is zero, to fix a splat with the script below:
# tc f a dev test0 egress matchall action sample rate 0 group 1 index 2
# tc -s a s action sample
total acts 1
action order 0: sample rate 1/0 group 1 pipe
index 2 ref 1 bind 1 installed 19 sec used 19 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
# ping 192.0.2.1 -I test0 -c1 -q
divide error: 0000 [#1] SMP PTI
CPU: 1 PID: 6192 Comm: ping Not tainted 5.1.0-rc2.diag2+ #591
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_sample_act+0x9e/0x1e0 [act_sample]
Code: 6a f1 85 c0 74 0d 80 3d 83 1a 00 00 00 0f 84 9c 00 00 00 4d 85 e4 0f 84 85 00 00 00 e8 9b d7 9c f1 44 8b 8b e0 00 00 00 31 d2 <41> f7 f1 85 d2 75 70 f6 85 83 00 00 00 10 48 8b 45 10 8b 88 08 01
RSP: 0018:
ffffae320190ba30 EFLAGS:
00010246
RAX:
00000000b0677d21 RBX:
ffff8af1ed9ec000 RCX:
0000000059a9fe49
RDX:
0000000000000000 RSI:
000000000c7e33b7 RDI:
ffff8af23daa0af0
RBP:
ffff8af1ee11b200 R08:
0000000074fcaf7e R09:
0000000000000000
R10:
0000000000000050 R11:
ffffffffb3088680 R12:
ffff8af232307f80
R13:
0000000000000003 R14:
ffff8af1ed9ec000 R15:
0000000000000000
FS:
00007fe9c6d2f740(0000) GS:
ffff8af23da80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fff6772f000 CR3:
00000000746a2004 CR4:
00000000001606e0
Call Trace:
tcf_action_exec+0x7c/0x1c0
tcf_classify+0x57/0x160
__dev_queue_xmit+0x3dc/0xd10
ip_finish_output2+0x257/0x6d0
ip_output+0x75/0x280
ip_send_skb+0x15/0x40
raw_sendmsg+0xae3/0x1410
sock_sendmsg+0x36/0x40
__sys_sendto+0x10e/0x140
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x60/0x210
entry_SYSCALL_64_after_hwframe+0x49/0xbe
[...]
Kernel panic - not syncing: Fatal exception in interrupt
Add a TDC selftest to document that 'rate' is now being validated.
Reported-by: Matteo Croce <mcroce@redhat.com>
Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Yotam Gigi <yotam.gi@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Thu, 4 Apr 2019 10:16:27 +0000 (12:16 +0200)]
net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stop
When a bpf program is uploaded, the driver computes the number of
xdp tx queues resulting in the allocation of additional qsets.
Starting from commit '
2ecbe4f4a027 ("net: thunderx: replace global
nicvf_rx_mode_wq work queue for all VFs to private for each of them")'
the driver runs link state polling for each VF resulting in the
following NULL pointer dereference:
[ 56.169256] Unable to handle kernel NULL pointer dereference at virtual address
0000000000000020
[ 56.178032] Mem abort info:
[ 56.180834] ESR = 0x96000005
[ 56.183877] Exception class = DABT (current EL), IL = 32 bits
[ 56.189792] SET = 0, FnV = 0
[ 56.192834] EA = 0, S1PTW = 0
[ 56.195963] Data abort info:
[ 56.198831] ISV = 0, ISS = 0x00000005
[ 56.202662] CM = 0, WnR = 0
[ 56.205619] user pgtable: 64k pages, 48-bit VAs, pgdp =
0000000021f0c7a0
[ 56.212315] [
0000000000000020] pgd=
0000000000000000, pud=
0000000000000000
[ 56.219094] Internal error: Oops:
96000005 [#1] SMP
[ 56.260459] CPU: 39 PID: 2034 Comm: ip Not tainted 5.1.0-rc3+ #3
[ 56.266452] Hardware name: GIGABYTE R120-T33/MT30-GS1, BIOS T49 02/02/2018
[ 56.273315] pstate:
80000005 (Nzcv daif -PAN -UAO)
[ 56.278098] pc : __ll_sc___cmpxchg_case_acq_64+0x4/0x20
[ 56.283312] lr : mutex_lock+0x2c/0x50
[ 56.286962] sp :
ffff0000219af1b0
[ 56.290264] x29:
ffff0000219af1b0 x28:
ffff800f64de49a0
[ 56.295565] x27:
0000000000000000 x26:
0000000000000015
[ 56.300865] x25:
0000000000000000 x24:
0000000000000000
[ 56.306165] x23:
0000000000000000 x22:
ffff000011117000
[ 56.311465] x21:
ffff800f64dfc080 x20:
0000000000000020
[ 56.316766] x19:
0000000000000020 x18:
0000000000000001
[ 56.322066] x17:
0000000000000000 x16:
ffff800f2e077080
[ 56.327367] x15:
0000000000000004 x14:
0000000000000000
[ 56.332667] x13:
ffff000010964438 x12:
0000000000000002
[ 56.337967] x11:
0000000000000000 x10:
0000000000000c70
[ 56.343268] x9 :
ffff0000219af120 x8 :
ffff800f2e077d50
[ 56.348568] x7 :
0000000000000027 x6 :
000000062a9d6a84
[ 56.353869] x5 :
0000000000000000 x4 :
ffff800f2e077480
[ 56.359169] x3 :
0000000000000008 x2 :
ffff800f2e077080
[ 56.364469] x1 :
0000000000000000 x0 :
0000000000000020
[ 56.369770] Process ip (pid: 2034, stack limit = 0x00000000c862da3a)
[ 56.376110] Call trace:
[ 56.378546] __ll_sc___cmpxchg_case_acq_64+0x4/0x20
[ 56.383414] drain_workqueue+0x34/0x198
[ 56.387247] nicvf_open+0x48/0x9e8 [nicvf]
[ 56.391334] nicvf_open+0x898/0x9e8 [nicvf]
[ 56.395507] nicvf_xdp+0x1bc/0x238 [nicvf]
[ 56.399595] dev_xdp_install+0x68/0x90
[ 56.403333] dev_change_xdp_fd+0xc8/0x240
[ 56.407333] do_setlink+0x8e0/0xbe8
[ 56.410810] __rtnl_newlink+0x5b8/0x6d8
[ 56.414634] rtnl_newlink+0x54/0x80
[ 56.418112] rtnetlink_rcv_msg+0x22c/0x2f8
[ 56.422199] netlink_rcv_skb+0x60/0x120
[ 56.426023] rtnetlink_rcv+0x28/0x38
[ 56.429587] netlink_unicast+0x1c8/0x258
[ 56.433498] netlink_sendmsg+0x1b4/0x350
[ 56.437410] sock_sendmsg+0x4c/0x68
[ 56.440887] ___sys_sendmsg+0x240/0x280
[ 56.444711] __sys_sendmsg+0x68/0xb0
[ 56.448275] __arm64_sys_sendmsg+0x2c/0x38
[ 56.452361] el0_svc_handler+0x9c/0x128
[ 56.456186] el0_svc+0x8/0xc
[ 56.459056] Code:
35ffff91 2a1003e0 d65f03c0 f9800011 (
c85ffc10)
[ 56.465166] ---[ end trace
4a57fdc27b0a572c ]---
[ 56.469772] Kernel panic - not syncing: Fatal exception
Fix it by checking nicvf_rx_mode_wq pointer in nicvf_open and nicvf_stop
Fixes: 2ecbe4f4a027 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them")
Fixes: 2c632ad8bc74 ("net: thunderx: move link state polling function to VF")
Reported-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 4 Apr 2019 17:35:42 +0000 (10:35 -0700)]
Merge branch 'net-hns-bugfixes-for-HNS-Driver'
Yonglong Liu says:
====================
net: hns: bugfixes for HNS Driver
This patchset fix some bugs that were found in the test of
various scenarios, or identify by KASAN/sparse.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Thu, 4 Apr 2019 08:46:47 +0000 (16:46 +0800)]
net: hns: Fix sparse: some warnings in HNS drivers
There are some sparse warnings in the HNS drivers:
warning: incorrect type in assignment (different address spaces)
expected void [noderef] <asn:2> *io_base
got void *vaddr
warning: cast removes address space '<asn:2>' of expression
[...]
Add __iomem and change all the u8 __iomem to void __iomem to
fix these kind of warnings.
warning: incorrect type in argument 1 (different address spaces)
expected void [noderef] <asn:2> *base
got unsigned char [usertype] *base_addr
warning: cast to restricted __le16
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] tbl_tcam_data_high
got restricted __le32 [usertype]
warning: cast to restricted __le32
[...]
These variables used u32/u16 as their type, and finally as a
parameter of writel(), writel() will do the cpu_to_le32 coversion
so remove the little endian covert code to fix these kind of warnings.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Thu, 4 Apr 2019 08:46:46 +0000 (16:46 +0800)]
net: hns: Fix WARNING when remove HNS driver with SMMU enabled
When enable SMMU, remove HNS driver will cause a WARNING:
[ 141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8
[ 141.954673] Modules linked in: hns_enet_drv(-)
[ 141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G W
5.0.0-rc1-28723-gb729c57de95c-dirty #32
[ 141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017
[ 142.000244] pstate:
60000005 (nZCv daif -PAN -UAO)
[ 142.009886] pc : __iommu_dma_unmap+0xc0/0xc8
[ 142.018476] lr : __iommu_dma_unmap+0xc0/0xc8
[ 142.027066] sp :
ffff000013533b90
[ 142.033728] x29:
ffff000013533b90 x28:
ffff8013e6983600
[ 142.044420] x27:
0000000000000000 x26:
0000000000000000
[ 142.055113] x25:
0000000056000000 x24:
0000000000000015
[ 142.065806] x23:
0000000000000028 x22:
ffff8013e66eee68
[ 142.076499] x21:
ffff8013db919800 x20:
0000ffffefbff000
[ 142.087192] x19:
0000000000001000 x18:
0000000000000007
[ 142.097885] x17:
000000000000000e x16:
0000000000000001
[ 142.108578] x15:
0000000000000019 x14:
363139343a70616d
[ 142.119270] x13:
6e75656761705f67 x12:
0000000000000000
[ 142.129963] x11:
00000000ffffffff x10:
0000000000000006
[ 142.140656] x9 :
1346c1aa88093500 x8 :
ffff0000114de4e0
[ 142.151349] x7 :
6662666578303d72 x6 :
ffff0000105ffec8
[ 142.162042] x5 :
0000000000000000 x4 :
0000000000000000
[ 142.172734] x3 :
00000000ffffffff x2 :
ffff0000114de500
[ 142.183427] x1 :
0000000000000000 x0 :
0000000000000035
[ 142.194120] Call trace:
[ 142.199030] __iommu_dma_unmap+0xc0/0xc8
[ 142.206920] iommu_dma_unmap_page+0x20/0x28
[ 142.215335] __iommu_unmap_page+0x40/0x60
[ 142.223399] hnae_unmap_buffer+0x110/0x134
[ 142.231639] hnae_free_desc+0x6c/0x10c
[ 142.239177] hnae_fini_ring+0x14/0x34
[ 142.246540] hnae_fini_queue+0x2c/0x40
[ 142.254080] hnae_put_handle+0x38/0xcc
[ 142.261619] hns_nic_dev_remove+0x54/0xfc [hns_enet_drv]
[ 142.272312] platform_drv_remove+0x24/0x64
[ 142.280552] device_release_driver_internal+0x17c/0x20c
[ 142.291070] driver_detach+0x4c/0x90
[ 142.298259] bus_remove_driver+0x5c/0xd8
[ 142.306148] driver_unregister+0x2c/0x54
[ 142.314037] platform_driver_unregister+0x10/0x18
[ 142.323505] hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv]
[ 142.335248] __arm64_sys_delete_module+0x214/0x25c
[ 142.344891] el0_svc_common+0xb0/0x10c
[ 142.352430] el0_svc_handler+0x24/0x80
[ 142.359968] el0_svc+0x8/0x7c0
[ 142.366104] ---[ end trace
60ad1cd58e63c407 ]---
The tx ring buffer map when xmit and unmap when xmit done. So in
hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring()
have a unmap operation for tx ring buffer, which is already unmapped
when xmit done, than cause this WARNING.
The hnae_alloc_buffers() is called in hnae_init_ring(),
so the hnae_free_buffers() should be in hnae_fini_ring(), not in
hnae_free_desc().
In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring().
When the ring buffer is tx ring, adds a piece of code to ensure that
the tx ring is unmap.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Thu, 4 Apr 2019 08:46:45 +0000 (16:46 +0800)]
net: hns: fix ICMP6 neighbor solicitation messages discard problem
ICMP6 neighbor solicitation messages will be discard by the Hip06
chips, because of not setting forwarding pool. Enable promisc mode
has the same problem.
This patch fix the wrong forwarding table configs for the multicast
vague matching when enable promisc mode, and add forwarding pool
for the forwarding table.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Thu, 4 Apr 2019 08:46:44 +0000 (16:46 +0800)]
net: hns: Fix probabilistic memory overwrite when HNS driver initialized
When reboot the system again and again, may cause a memory
overwrite.
[ 15.638922] systemd[1]: Reached target Swap.
[ 15.667561] tun: Universal TUN/TAP device driver, 1.6
[ 15.676756] Bridge firewalling registered
[ 17.344135] Unable to handle kernel paging request at virtual address
0000000200000040
[ 17.352179] Mem abort info:
[ 17.355007] ESR = 0x96000004
[ 17.358105] Exception class = DABT (current EL), IL = 32 bits
[ 17.364112] SET = 0, FnV = 0
[ 17.367209] EA = 0, S1PTW = 0
[ 17.370393] Data abort info:
[ 17.373315] ISV = 0, ISS = 0x00000004
[ 17.377206] CM = 0, WnR = 0
[ 17.380214] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____)
[ 17.386926] [
0000000200000040] pgd=
0000000000000000
[ 17.391878] Internal error: Oops:
96000004 [#1] SMP
[ 17.396824] CPU: 23 PID: 95 Comm: kworker/u130:0 Tainted: G E 4.19.25-1.2.78.aarch64 #1
[ 17.414175] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.54 08/16/2018
[ 17.425615] Workqueue: events_unbound async_run_entry_fn
[ 17.435151] pstate:
00000005 (nzcv daif -PAN -UAO)
[ 17.444139] pc : __mutex_lock.isra.1+0x74/0x540
[ 17.453002] lr : __mutex_lock.isra.1+0x3c/0x540
[ 17.461701] sp :
ffff000100d9bb60
[ 17.469146] x29:
ffff000100d9bb60 x28:
0000000000000000
[ 17.478547] x27:
0000000000000000 x26:
ffff802fb8945000
[ 17.488063] x25:
0000000000000000 x24:
ffff802fa32081a8
[ 17.497381] x23:
0000000000000002 x22:
ffff801fa2b15220
[ 17.506701] x21:
ffff000009809000 x20:
ffff802fa23a0888
[ 17.515980] x19:
ffff801fa2b15220 x18:
0000000000000000
[ 17.525272] x17:
0000000200000000 x16:
0000000200000000
[ 17.534511] x15:
0000000000000000 x14:
0000000000000000
[ 17.543652] x13:
ffff000008d95db8 x12:
000000000000000d
[ 17.552780] x11:
ffff000008d95d90 x10:
0000000000000b00
[ 17.561819] x9 :
ffff000100d9bb90 x8 :
ffff802fb89d6560
[ 17.570829] x7 :
0000000000000004 x6 :
00000004a1801d05
[ 17.579839] x5 :
0000000000000000 x4 :
0000000000000000
[ 17.588852] x3 :
ffff802fb89d5a00 x2 :
0000000000000000
[ 17.597734] x1 :
0000000200000000 x0 :
0000000200000000
[ 17.606631] Process kworker/u130:0 (pid: 95, stack limit = 0x(____ptrval____))
[ 17.617438] Call trace:
[ 17.623349] __mutex_lock.isra.1+0x74/0x540
[ 17.630927] __mutex_lock_slowpath+0x24/0x30
[ 17.638602] mutex_lock+0x50/0x60
[ 17.645295] drain_workqueue+0x34/0x198
[ 17.652623] __sas_drain_work+0x7c/0x168
[ 17.659903] sas_drain_work+0x60/0x68
[ 17.666947] hisi_sas_scan_finished+0x30/0x40 [hisi_sas_main]
[ 17.676129] do_scsi_scan_host+0x70/0xb0
[ 17.683534] do_scan_async+0x20/0x228
[ 17.690586] async_run_entry_fn+0x4c/0x1d0
[ 17.697997] process_one_work+0x1b4/0x3f8
[ 17.705296] worker_thread+0x54/0x470
Every time the call trace is not the same, but the overwrite address
is always the same:
Unable to handle kernel paging request at virtual address
0000000200000040
The root cause is, when write the reg XGMAC_MAC_TX_LF_RF_CONTROL_REG,
didn't use the io_base offset.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Thu, 4 Apr 2019 08:46:43 +0000 (16:46 +0800)]
net: hns: Use NAPI_POLL_WEIGHT for hns driver
When the HNS driver loaded, always have an error print:
"netif_napi_add() called with weight 256"
This is because the kernel checks the NAPI polling weights
requested by drivers and it prints an error message if a driver
requests a weight bigger than 64.
So use NAPI_POLL_WEIGHT to fix it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Liubin Shu [Thu, 4 Apr 2019 08:46:42 +0000 (16:46 +0800)]
net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()
This patch is trying to fix the issue due to:
[27237.844750] BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x708/0xa18[hns_enet_drv]
After hnae_queue_xmit() in hns_nic_net_xmit_hw(), can be
interrupted by interruptions, and than call hns_nic_tx_poll_one()
to handle the new packets, and free the skb. So, when turn back to
hns_nic_net_xmit_hw(), calling skb->len will cause use-after-free.
This patch update tx ring statistics in hns_nic_tx_poll_one() to
fix the bug.
Signed-off-by: Liubin Shu <shuliubin@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Li [Mon, 1 Apr 2019 03:55:57 +0000 (11:55 +0800)]
arm64: fix wrong check of on_sdei_stack in nmi context
When doing unwind_frame() in the context of pseudo nmi (need enable
CONFIG_ARM64_PSEUDO_NMI), reaching the bottom of the stack (fp == 0,
pc != 0), function on_sdei_stack() will return true while the sdei acpi
table is not inited in fact. This will cause a "NULL pointer dereference"
oops when going on.
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Dmitry V. Levin [Fri, 29 Mar 2019 17:12:30 +0000 (20:12 +0300)]
csky: Fix syscall_get_arguments() and syscall_set_arguments()
C-SKY syscall arguments are located in orig_a0,a1,a2,a3,regs[0],regs[1]
fields of struct pt_regs.
Due to an off-by-one bug and a bug in pointer arithmetic
syscall_get_arguments() was reading orig_a0,regs[1..5] fields instead.
Likewise, syscall_set_arguments() was writing orig_a0,regs[1..5] fields
instead.
Link: http://lkml.kernel.org/r/20190329171230.GB32456@altlinux.org
Fixes: 4859bfca11c7d ("csky: System Call")
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: stable@vger.kernel.org # v4.20+
Tested-by: Guo Ren <ren_guo@c-sky.com>
Acked-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Dmitry V. Levin [Fri, 29 Mar 2019 17:12:21 +0000 (20:12 +0300)]
riscv: Fix syscall_get_arguments() and syscall_set_arguments()
RISC-V syscall arguments are located in orig_a0,a1..a5 fields
of struct pt_regs.
Due to an off-by-one bug and a bug in pointer arithmetic
syscall_get_arguments() was reading s3..s7 fields instead of a1..a5.
Likewise, syscall_set_arguments() was writing s3..s7 fields
instead of a1..a5.
Link: http://lkml.kernel.org/r/20190329171221.GA32456@altlinux.org
Fixes: e2c0cdfba7f69 ("RISC-V: User-facing API")
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Cc: stable@vger.kernel.org # v4.15+
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Stanislav Fomichev [Wed, 3 Apr 2019 20:53:18 +0000 (13:53 -0700)]
flow_dissector: rst'ify documentation
Rename bpf_flow_dissector.txt to bpf_flow_dissector.rst and fix
formatting. Also, link it from the Documentation/networking/index.rst.
Tested with 'make htmldocs' to make sure it looks reasonable.
Fixes: ae82899bbe92 ("flow_dissector: document BPF flow dissector environment")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Steven Rostedt (Red Hat) [Mon, 7 Nov 2016 21:26:36 +0000 (16:26 -0500)]
tracing/syscalls: Pass in hardcoded 6 into syscall_get_arguments()
The only users that calls syscall_get_arguments() with a variable and not a
hard coded '6' is ftrace_syscall_enter(). syscall_get_arguments() can be
optimized by removing a variable input, and always grabbing 6 arguments
regardless of what the system call actually uses.
Change ftrace_syscall_enter() to pass the 6 args into a local stack array
and copy the necessary arguments into the trace event as needed.
This is needed to remove two parameters from syscall_get_arguments().
Link: http://lkml.kernel.org/r/20161107213233.627583542@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (Red Hat) [Mon, 7 Nov 2016 21:26:35 +0000 (16:26 -0500)]
ptrace: Remove maxargs from task_current_syscall()
task_current_syscall() has a single user that passes in 6 for maxargs, which
is the maximum arguments that can be used to get system calls from
syscall_get_arguments(). Instead of passing in a number of arguments to
grab, just get 6 arguments. The args argument even specifies that it's an
array of 6 items.
This will also allow changing syscall_get_arguments() to not get a variable
number of arguments, but always grab 6.
Linus also suggested not passing in a bunch of arguments to
task_current_syscall() but to instead pass in a pointer to a structure, and
just fill the structure. struct seccomp_data has almost all the parameters
that is needed except for the stack pointer (sp). As seccomp_data is part of
uapi, and I'm afraid to change it, a new structure was created
"syscall_info", which includes seccomp_data and adds the "sp" field.
Link: http://lkml.kernel.org/r/20161107213233.466776454@goodmis.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Qian Cai [Thu, 4 Apr 2019 10:54:41 +0000 (11:54 +0100)]
mm/compaction.c: abort search if isolation fails
Running LTP oom01 in a tight loop or memory stress testing put the system
in a low-memory situation could triggers random memory corruption like
page flag corruption below due to in fast_isolate_freepages(), if
isolation fails, next_search_order() does not abort the search immediately
could lead to improper accesses.
UBSAN: Undefined behaviour in ./include/linux/mm.h:1195:50
index 7 is out of range for type 'zone [5]'
Call Trace:
dump_stack+0x62/0x9a
ubsan_epilogue+0xd/0x7f
__ubsan_handle_out_of_bounds+0x14d/0x192
__isolate_free_page+0x52c/0x600
compaction_alloc+0x886/0x25f0
unmap_and_move+0x37/0x1e70
migrate_pages+0x2ca/0xb20
compact_zone+0x19cb/0x3620
kcompactd_do_work+0x2df/0x680
kcompactd+0x1d8/0x6c0
kthread+0x32c/0x3f0
ret_from_fork+0x35/0x40
------------[ cut here ]------------
kernel BUG at mm/page_alloc.c:3124!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
RIP: 0010:__isolate_free_page+0x464/0x600
RSP: 0000:
ffff888b9e1af848 EFLAGS:
00010007
RAX:
0000000030000000 RBX:
ffff888c39fcf0f8 RCX:
0000000000000000
RDX:
1ffff111873f9e25 RSI:
0000000000000004 RDI:
ffffed1173c35ef6
RBP:
ffff888b9e1af898 R08:
fffffbfff4fc2461 R09:
fffffbfff4fc2460
R10:
fffffbfff4fc2460 R11:
ffffffffa7e12303 R12:
0000000000000008
R13:
dffffc0000000000 R14:
0000000000000000 R15:
0000000000000007
FS:
0000000000000000(0000) GS:
ffff888ba8e80000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fc7abc00000 CR3:
0000000752416004 CR4:
00000000001606a0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
compaction_alloc+0x886/0x25f0
unmap_and_move+0x37/0x1e70
migrate_pages+0x2ca/0xb20
compact_zone+0x19cb/0x3620
kcompactd_do_work+0x2df/0x680
kcompactd+0x1d8/0x6c0
kthread+0x32c/0x3f0
ret_from_fork+0x35/0x40
Link: http://lkml.kernel.org/r/20190320192648.52499-1-cai@lca.pw
Fixes: dbe2d4e4f12e ("mm, compaction: round-robin the order while searching the free lists for a target")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Mel Gorman [Thu, 4 Apr 2019 10:54:09 +0000 (11:54 +0100)]
mm/compaction.c: correct zone boundary handling when resetting pageblock skip hints
Mikhail Gavrilo reported the following bug being triggered in a Fedora
kernel based on 5.1-rc1 but it is relevant to a vanilla kernel.
kernel: page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
kernel: ------------[ cut here ]------------
kernel: kernel BUG at include/linux/mm.h:1021!
kernel: invalid opcode: 0000 [#1] SMP NOPTI
kernel: CPU: 6 PID: 116 Comm: kswapd0 Tainted: G C 5.1.0-0.rc1.git1.3.fc31.x86_64 #1
kernel: Hardware name: System manufacturer System Product Name/ROG STRIX X470-I GAMING, BIOS 1201 12/07/2018
kernel: RIP: 0010:__reset_isolation_pfn+0x244/0x2b0
kernel: Code: fe 06 e8 0f 8e fc ff 44 0f b6 4c 24 04 48 85 c0 0f 85 dc fe ff ff e9 68 fe ff ff 48 c7 c6 58 b7 2e 8c 4c 89 ff e8 0c 75 00 00 <0f> 0b 48 c7 c6 58 b7 2e 8c e8 fe 74 00 00 0f 0b 48 89 fa 41 b8 01
kernel: RSP: 0018:
ffff9e2d03f0fde8 EFLAGS:
00010246
kernel: RAX:
0000000000000034 RBX:
000000000081f380 RCX:
ffff8cffbddd6c20
kernel: RDX:
0000000000000000 RSI:
0000000000000006 RDI:
ffff8cffbddd6c20
kernel: RBP:
0000000000000001 R08:
0000009898b94613 R09:
0000000000000000
kernel: R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000100000
kernel: R13:
0000000000100000 R14:
0000000000000001 R15:
ffffca7de07ce000
kernel: FS:
0000000000000000(0000) GS:
ffff8cffbdc00000(0000) knlGS:
0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
kernel: CR2:
00007fc1670e9000 CR3:
00000007f5276000 CR4:
00000000003406e0
kernel: Call Trace:
kernel: __reset_isolation_suitable+0x62/0x120
kernel: reset_isolation_suitable+0x3b/0x40
kernel: kswapd+0x147/0x540
kernel: ? finish_wait+0x90/0x90
kernel: kthread+0x108/0x140
kernel: ? balance_pgdat+0x560/0x560
kernel: ? kthread_park+0x90/0x90
kernel: ret_from_fork+0x27/0x50
He bisected it down to
e332f741a8dd ("mm, compaction: be selective about
what pageblocks to clear skip hints"). The problem is that the patch in
question was sloppy with respect to the handling of zone boundaries. In
some instances, it was possible for PFNs outside of a zone to be examined
and if those were not properly initialised or poisoned then it would
trigger the VM_BUG_ON. This patch corrects the zone boundary issues when
resetting pageblock skip hints and Mikhail reported that the bug did not
trigger after 30 hours of testing.
Link: http://lkml.kernel.org/r/20190327085424.GL3189@techsingularity.net
Fixes: e332f741a8dd ("mm, compaction: be selective about what pageblocks to clear skip hints")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Linus Torvalds [Thu, 4 Apr 2019 06:21:25 +0000 (20:21 -1000)]
Merge tag '5.1-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb3 fixes from Steve French:
"Four smb3 fixes for stable:
- fix an open path where we had an unitialized structure
- fix for snapshot (previous version) enumeration
- allow reconnect timeout on handles to be configurable to better
handle network or server crash
- correctly handle lack of file_all_info structure"
* tag '5.1-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: a smb2_validate_and_copy_iov failure does not mean the handle is invalid.
SMB3: Allow persistent handle timeout to be configurable on mount
smb3: Fix enumerating snapshots to Azure
cifs: fix kref underflow in close_shroot()
Junwei Hu [Tue, 2 Apr 2019 11:38:04 +0000 (19:38 +0800)]
ipv6: Fix dangling pointer when ipv6 fragment
At the beginning of ip6_fragment func, the prevhdr pointer is
obtained in the ip6_find_1stfragopt func.
However, all the pointers pointing into skb header may change
when calling skb_checksum_help func with
skb->ip_summed = CHECKSUM_PARTIAL condition.
The prevhdr pointe will be dangling if it is not reloaded after
calling __skb_linearize func in skb_checksum_help func.
Here, I add a variable, nexthdr_offset, to evaluate the offset,
which does not changes even after calling __skb_linearize func.
Fixes: 405c92f7a541 ("ipv6: add defensive check for CHECKSUM_PARTIAL skbs in ip_fragment")
Signed-off-by: Junwei Hu <hujunwei4@huawei.com>
Reported-by: Wenhao Zhang <zhangwenhao8@huawei.com>
Reported-by: syzbot+e8ce541d095e486074fc@syzkaller.appspotmail.com
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Tue, 2 Apr 2019 06:16:03 +0000 (08:16 +0200)]
net-gro: Fix GRO flush when receiving a GSO packet.
Currently we may merge incorrectly a received GSO packet
or a packet with frag_list into a packet sitting in the
gro_hash list. skb_segment() may crash case because
the assumptions on the skb layout are not met.
The correct behaviour would be to flush the packet in the
gro_hash list and send the received GSO packet directly
afterwards. Commit
d61d072e87c8e ("net-gro: avoid reorders")
sets NAPI_GRO_CB(skb)->flush in this case, but this is not
checked before merging. This patch makes sure to check this
flag and to not merge in that case.
Fixes: d61d072e87c8e ("net-gro: avoid reorders")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rodrigo Vivi [Thu, 4 Apr 2019 01:00:41 +0000 (18:00 -0700)]
Merge tag 'gvt-fixes-2019-04-04' of https://github.com/intel/gvt-linux into drm-intel-fixes
gvt-fixes-2019-04-04
- Fix shadow mm pin count (Yan)
- Fix cmd parser error path recover (Yan)
- Fix vGPU display plane size calculation (Xiong)
- Fix kerneldoc (Chris)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404003957.GB8327@zhen-hp.sh.intel.com
Chris Wilson [Tue, 5 Feb 2019 20:30:33 +0000 (20:30 +0000)]
drm/i915/gvt: Fix kerneldoc typo for intel_vgpu_emulate_hotplug
drivers/gpu/drm/i915/gvt/display.c:457: warning: Function parameter or member 'connected' not described in 'intel_vgpu_emulate_hotplug'
drivers/gpu/drm/i915/gvt/display.c:457: warning: Excess function parameter 'conncted' description in 'intel_vgpu_emulate_hotplug'
Fixes: 1ca20f33df42 ("drm/i915/gvt: add hotplug emulation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Hang Yuan <hang.yuan@linux.intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Xiong Zhang [Mon, 25 Mar 2019 08:29:19 +0000 (16:29 +0800)]
drm/i915/gvt: Correct the calculation of plane size
stride isn't in unit of pixel, it is bytes, so calculation of
plane size doesn't need to multiple bpp.
Fixes: e546e281d33d ("drm/i915/gvt: Dmabuf support for GVT-g")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Alex Williamson [Wed, 3 Apr 2019 18:36:21 +0000 (12:36 -0600)]
vfio/type1: Limit DMA mappings per container
Memory backed DMA mappings are accounted against a user's locked
memory limit, including multiple mappings of the same memory. This
accounting bounds the number of such mappings that a user can create.
However, DMA mappings that are not backed by memory, such as DMA
mappings of device MMIO via mmaps, do not make use of page pinning
and therefore do not count against the user's locked memory limit.
These mappings still consume memory, but the memory is not well
associated to the process for the purpose of oom killing a task.
To add bounding on this use case, we introduce a limit to the total
number of concurrent DMA mappings that a user is allowed to create.
This limit is exposed as a tunable module option where the default
value of 64K is expected to be well in excess of any reasonable use
case (a large virtual machine configuration would typically only make
use of tens of concurrent mappings).
This fixes CVE-2019-3882.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Wang Hai [Wed, 3 Apr 2019 18:36:21 +0000 (12:36 -0600)]
vfio/spapr_tce: Make symbol 'tce_iommu_driver_ops' static
Fixes the following sparse warning:
drivers/vfio/vfio_iommu_spapr_tce.c:1401:36: warning:
symbol 'tce_iommu_driver_ops' was not declared. Should it be static?
Fixes: 5ffd229c0273 ("powerpc/vfio: Implement IOMMU driver for VFIO")
Signed-off-by: Wang Hai <wanghai26@huawei.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Louis Taylor [Wed, 3 Apr 2019 18:36:20 +0000 (12:36 -0600)]
vfio/pci: use correct format characters
When compiling with -Wformat, clang emits the following warnings:
drivers/vfio/pci/vfio_pci.c:1601:5: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1601:13: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1601:21: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1601:32: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1605:5: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1605:13: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1605:21: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1605:32: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct ones for unsigned ints.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Linus Torvalds [Wed, 3 Apr 2019 16:11:12 +0000 (06:11 -1000)]
Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- build dependency fix for hid-asus from Arnd Bergmann
- addition of omitted mapping of _ASSISTANT key from Dmitry Torokhov
- race condition fix in hid-debug inftastructure from He, Bo
- fixed support for devices with big maximum report size from Kai-Heng
Feng
- deadlock fix in hid-steam from Rodrigo Rivas Costa
- quite a few device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: input: add mapping for Assistant key
HID: i2c-hid: Disable runtime PM on Synaptics touchpad
HID: quirks: Fix keyboard + touchpad on Lenovo Miix 630
HID: logitech: Handle 0 scroll events for the m560
HID: debug: fix race condition with between rdesc_show() and device removal
HID: logitech: check the return value of create_singlethread_workqueue
HID: Increase maximum report size allowed by hid_field_extract()
HID: steam: fix deadlock with input devices.
HID: uclogic: remove redudant duplicated null check on ver_ptr
HID: quirks: Drop misused kernel-doc annotation
HID: hid-asus: select CONFIG_POWER_SUPPLY
HID: quirks: use correct format chars in dbg_hid
Daniel Borkmann [Wed, 3 Apr 2019 14:49:49 +0000 (16:49 +0200)]
Merge branch 'bpf-flow-dissector-fixes'
Stanislav Fomichev says:
====================
This patch series fixes the existing BPF flow dissector API to
support calling BPF progs from the eth_get_headlen context (the
support itself will be added in bpf-next tree).
The summary of the changes:
* fix VLAN handling in bpf_flow.c, we don't need to peek back and look
at skb->vlan_present; add selftests
* pass and use flow_keys->n_proto instead of skb->protocol
* fix clamping of flow_keys->nhoff for packets with nhoff > 0
* prohibit access to most of the __sk_buff fields from BPF flow
dissector progs; only data/data_end/flow_keys are allowed (all input
is now passed via flow_keys)
* finally, document BPF flow dissector program environment
====================
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Petar Penkov <peterpenkov96@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Stanislav Fomichev [Mon, 1 Apr 2019 20:57:34 +0000 (13:57 -0700)]
flow_dissector: document BPF flow dissector environment
Short doc on what BPF flow dissector should expect in the input
__sk_buff and flow_keys.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Stanislav Fomichev [Mon, 1 Apr 2019 20:57:33 +0000 (13:57 -0700)]
flow_dissector: allow access only to a subset of __sk_buff fields
Use whitelist instead of a blacklist and allow only a small set of
fields that might be relevant in the context of flow dissector:
* data
* data_end
* flow_keys
This is required for the eth_get_headlen case where we have only a
chunk of data to dissect (i.e. trying to read the other skb fields
doesn't make sense).
Note, that it is a breaking API change! However, we've provided
flow_keys->n_proto as a substitute for skb->protocol; and there is
no need to manually handle skb->vlan_present. So even if we
break somebody, the migration is trivial. Unfortunately, we can't
support eth_get_headlen use-case without those breaking changes.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Stanislav Fomichev [Mon, 1 Apr 2019 20:57:32 +0000 (13:57 -0700)]
flow_dissector: fix clamping of BPF flow_keys for non-zero nhoff
Don't allow BPF program to set flow_keys->nhoff to less than initial
value. We currently don't read the value afterwards in anything but
the tests, but it's still a good practice to return consistent
values to the test programs.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Stanislav Fomichev [Mon, 1 Apr 2019 20:57:31 +0000 (13:57 -0700)]
net/flow_dissector: pass flow_keys->n_proto to BPF programs
This is a preparation for the next commit that would prohibit access to
the most fields of __sk_buff from the BPF programs.
Instead of requiring BPF flow dissector programs to look into skb,
pass all input data in the flow_keys.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Stanislav Fomichev [Mon, 1 Apr 2019 20:57:30 +0000 (13:57 -0700)]
selftests/bpf: fix vlan handling in flow dissector program
When we tail call PROG(VLAN) from parse_eth_proto we don't need to peek
back to handle vlan proto because we didn't adjust nhoff/thoff yet. Use
flow_keys->n_proto, that we set in parse_eth_proto instead and
properly increment nhoff as well.
Also, always use skb->protocol and don't look at skb->vlan_present.
skb->vlan_present indicates that vlan information is stored out-of-band
in skb->vlan_{tci,proto} and vlan header is already pulled from skb.
That means, skb->vlan_present == true is not relevant for BPF flow
dissector.
Add simple test cases with VLAN tagged frames:
* single vlan for ipv4
* double vlan for ipv6
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Dmitry Torokhov [Tue, 2 Apr 2019 16:57:13 +0000 (09:57 -0700)]
HID: input: add mapping for Assistant key
According to HUTRR89 usage 0x1cb from the consumer page was assigned to
allow launching desktop-aware assistant application, so let's add the
mapping.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Maxime Ripard [Fri, 22 Mar 2019 09:16:50 +0000 (10:16 +0100)]
mfd: sun6i-prcm: Allow to compile with COMPILE_TEST
Since this driver only has a dependency on ARCH_SUNXI just because it
doesn't make any sense to run it on something else, we can definitely
enable it through COMPILE_TEST as well to get some build coverage.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Linus Torvalds [Wed, 3 Apr 2019 06:24:32 +0000 (20:24 -1000)]
Merge tag 'pidfd-fixes-v5.1-rc3' of gitolite.pub/scm/linux/kernel/git/brauner/linux
Pull pidfd fix from Christian Brauner:
"This should be an uncontroversial fix for pidfd_send_signal() by Jann
to better align it's behavior with other signal sending functions:
In one of the early versions of the patchset it was suggested to not
unconditionally error out when a signal with SI_USER is sent to a
non-current task (cf. [1]).
Instead, pidfd_send_signal() currently silently changes this to a
regular kill signal. While this is technically fine, the semantics are
weird since the kernel just silently converts a user's request behind
their back and also no other signal sending function allows to do
this. It gets more hairy when we introduce sending signals to a
specific thread soon.
So let's align pidfd_send_signal() with all the other signal sending
functions and error out when SI_USER signals are sent to a non-current
task"
* tag 'pidfd-fixes-v5.1-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
signal: don't silently convert SI_USER signals to non-current pidfd
Linus Torvalds [Wed, 3 Apr 2019 04:14:32 +0000 (18:14 -1000)]
Merge tag 'hwmon-for-v5.1-rc4' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Couple of minor hwmon fixes"
* tag 'hwmon-for-v5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
dt-bindings: hwmon: (
adc128d818) Specify ti,mode property size
hwmon: (ntc_thermistor) Fix temperature type reporting
hwmon: (occ) Fix power sensor indexing
hwmon: (w83773g) Select REGMAP_I2C to fix build error
Nicolas Pitre [Tue, 2 Apr 2019 17:18:45 +0000 (13:18 -0400)]
Update Nicolas Pitre's email address
The @linaro version won't be valid much longer.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexandre Belloni [Tue, 2 Apr 2019 10:26:36 +0000 (12:26 +0200)]
rtc: da9063: set uie_unsupported when relevant
The
DA9063AD doesn't support alarms on any seconds and its granularity is
the minute. Set uie_unsupported in that case.
Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Le Ma [Mon, 1 Apr 2019 10:08:30 +0000 (18:08 +0800)]
drm/amdgpu: remove unnecessary rlc reset function on gfx9
The rlc reset function is not necessary during gfx9 initialization/resume phase.
And this function would even cause rlc fw loading failed on some gfx9 ASIC.
Remove this function safely with verification well on Vega/Raven platform.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David S. Miller [Tue, 2 Apr 2019 20:27:11 +0000 (13:27 -0700)]
Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2019-04-01
This series contains two fixes for XDP in the i40e driver.
Björn provides both fixes, first moving a function out of the header and
into the main.c file. Second fixes a regression introduced in an
earlier patch that removed umem from the VSI. This caused an issue
because the setup code would try to enable AF_XDP zero copy
unconditionally, as long as there was a umem placed in the netdev
receive structure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / openwrt / staging / blogic.git / log