Jose Abreu [Wed, 9 Jan 2019 09:06:00 +0000 (10:06 +0100)]
net: stmmac: Prevent RX starvation in stmmac_napi_poll()
Currently, TX is given a budget which is consumed by stmmac_tx_clean()
and stmmac_rx() is given the remaining non-consumed budget.
This is wrong and in case we are sending a large number of packets this
can starve RX because remaining budget will be low.
Let's give always the same budget for RX and TX clean.
While at it, check if we missed any interrupts while we were in NAPI
callback by looking at DMA interrupt status.
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 9 Jan 2019 09:05:59 +0000 (10:05 +0100)]
net: stmmac: Fix the logic of checking if RX Watchdog must be enabled
RX Watchdog can be disabled by platform definitions but currently we are
initializing the descriptors before checking if Watchdog must be
disabled or not.
Fix this by checking earlier if user wants Watchdog disabled or not.
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 9 Jan 2019 09:05:58 +0000 (10:05 +0100)]
net: stmmac: Check if CBS is supported before configuring
Check if CBS is currently supported before trying to configure it in HW.
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 9 Jan 2019 09:05:57 +0000 (10:05 +0100)]
net: stmmac: dwxgmac2: Only clear interrupts that are active
In DMA interrupt handler we were clearing all interrupts status, even
the ones that were not active. Fix this and only clear the active
interrupts.
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 9 Jan 2019 09:05:56 +0000 (10:05 +0100)]
net: stmmac: Fix PCI module removal leak
Since commit
b7d0f08e9129, the enable / disable of PCI device is not
managed which will result in IO regions not being automatically unmapped.
As regions continue mapped it is currently not possible to remove and
then probe again the PCI module of stmmac.
Fix this by manually unmapping regions on remove callback.
Changes from v1:
- Fix build error
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Fixes: b7d0f08e9129 ("net: stmmac: Fix WoL for PCI-based setups")
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 11 Jan 2019 20:51:49 +0000 (12:51 -0800)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2019-01-11
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix TCP-BPF support for correctly setting the initial window
via TCP_BPF_IW on an active TFO sender, from Yuchung.
2) Fix a panic in BPF's stack_map_get_build_id()'s ELF parsing on
32 bit archs caused by page_address() returning NULL, from Song.
3) Fix BTF pretty print in kernel and bpftool when bitfield member
offset is greater than 256. Also add test cases, from Yonghong.
4) Fix improper argument handling in xdp1 sample, from Ioana.
5) Install missing tcp_server.py and tcp_client.py files from
BPF selftests, from Anders.
6) Add test_libbpf to gitignore in libbpf and BPF selftests,
from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 11 Jan 2019 09:40:55 +0000 (10:40 +0100)]
Merge branch 'bpf-fix-bitfield-printing'
Yonghong Song says:
====================
The previous BTF kind_flag support patch set introduced a bug
for kernel bpffs pretty printing and another bug for bpftool
map pretty printing. If a bitfield struct member offset is
greater than 256 bits, printed value for that struct
member will be incorrect.
- Patch #1 fixed the bug in kernel bpffs pretty printing.
- Patch #2 enhanced the test_btf test case to cover the
issue exposed by patch #1.
- Patch #3 fixed the bug in bpftool map pretty printing.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Yonghong Song [Thu, 10 Jan 2019 19:14:02 +0000 (11:14 -0800)]
tools/bpf: fix bpftool map dump with bitfields
Commit
8772c8bc093b ("tools: bpftool: support pretty print
with kind_flag set") added bpftool map dump with kind_flag
support. When bitfield_size can be retrieved directly from
btf_member, function btf_dumper_bitfield() is called to
dump the bitfield. The implementation passed the
wrong parameter "bit_offset" to the function. The excepted
value is the bit_offset within a byte while the passed-in
value is the struct member offset.
This commit fixed the bug with passing correct "bit_offset"
with adjusted data pointer.
Fixes: 8772c8bc093b ("tools: bpftool: support pretty print with kind_flag set")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Yonghong Song [Thu, 10 Jan 2019 19:14:01 +0000 (11:14 -0800)]
tools/bpf: test btf bitfield with >=256 struct member offset
This patch modified test_btf pretty print test to cover
the bitfield with struct member equal to or greater 256.
Without the previous kernel patch fix, the modified test will fail:
$ test_btf -p
......
BTF pretty print array(#1)......unexpected pprint output
expected: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x1}
read: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x0}
BTF pretty print array(#2)......unexpected pprint output
expected: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x1}
read: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x0}
PASS:6 SKIP:0 FAIL:2
With the kernel fix, the modified test will succeed:
$ test_btf -p
......
BTF pretty print array(#1)......OK
BTF pretty print array(#2)......OK
PASS:8 SKIP:0 FAIL:0
Fixes: 9d5f9f701b18 ("bpf: btf: fix struct/union/fwd types with kind_flag")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Yonghong Song [Thu, 10 Jan 2019 19:14:00 +0000 (11:14 -0800)]
bpf: fix bpffs bitfield pretty print
Commit
9d5f9f701b18 ("bpf: btf: fix struct/union/fwd types
with kind_flag") introduced kind_flag and used bitfield_size
in the btf_member to directly pretty print member values.
The commit contained a bug where the incorrect parameters could be
passed to function btf_bitfield_seq_show(). The bits_offset
parameter in the function expects a value less than 8.
Instead, the member offset in the structure is passed.
The below is btf_bitfield_seq_show() func signature:
void btf_bitfield_seq_show(void *data, u8 bits_offset,
u8 nr_bits, struct seq_file *m)
both bits_offset and nr_bits are u8 type. If the bitfield
member offset is greater than 256, incorrect value will
be printed.
This patch fixed the issue by calculating correct proper
data offset and bits_offset similar to non kind_flag case.
Fixes: 9d5f9f701b18 ("bpf: btf: fix struct/union/fwd types with kind_flag")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Heiner Kallweit [Wed, 9 Jan 2019 07:20:28 +0000 (08:20 +0100)]
net: ethernet: mediatek: fix warning in phy_start_aneg
linux 5.0-rc1 shows following warning on bpi-r2/mt7623 bootup:
[ 5.170597] WARNING: CPU: 3 PID: 1 at drivers/net/phy/phy.c:548 phy_start_aneg+0x110/0x144
[ 5.178826] called from state READY
....
[ 5.264111] [<
c0629fd4>] (phy_start_aneg) from [<
c0e3e720>] (mtk_init+0x414/0x47c)
[ 5.271630] r7:
df5f5eec r6:
c0f08c48 r5:
00000000 r4:
dea67800
[ 5.277256] [<
c0e3e30c>] (mtk_init) from [<
c07dabbc>] (register_netdevice+0x98/0x51c)
[ 5.285035] r8:
00000000 r7:
00000000 r6:
c0f97080 r5:
c0f08c48 r4:
dea67800
[ 5.291693] [<
c07dab24>] (register_netdevice) from [<
c07db06c>] (register_netdev+0x2c/0x44)
[ 5.299989] r8:
00000000 r7:
dea2e608 r6:
deacea00 r5:
dea2e604 r4:
dea67800
[ 5.306646] [<
c07db040>] (register_netdev) from [<
c06326d8>] (mtk_probe+0x668/0x7ac)
[ 5.314336] r5:
dea2e604 r4:
dea2e040
[ 5.317890] [<
c0632070>] (mtk_probe) from [<
c05a78fc>] (platform_drv_probe+0x58/0xa8)
[ 5.325670] r10:
c0f86bac r9:
00000000 r8:
c0fbe578 r7:
00000000 r6:
c0f86bac r5:
00000000
[ 5.333445] r4:
deacea10
[ 5.335963] [<
c05a78a4>] (platform_drv_probe) from [<
c05a5248>] (really_probe+0x2d8/0x424)
maybe other boards using this generic driver are affected
v2:
optimization:
- phy_set_max_speed() is only needed if you want to reduce the
max speed, typically if the PHY supports 1Gbps but the MAC
supports 100Mbps only.
- The pause parameters are autonegotiated. Except you have a specific
need you normally don't need to manually fiddle with this.
- phy_start_aneg() is called implicitly by the phylib state machine,
you shouldn't call it manually except you have a good excuse.
- netif_carrier_on/netif_carrier_off in mtk_phy_link_adjust() isn't
needed. It's done by phy_link_change() in phylib.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Wed, 9 Jan 2019 02:14:28 +0000 (18:14 -0800)]
tcp: change txhash on SYN-data timeout
Previously upon SYN timeouts the sender recomputes the txhash to
try a different path. However this does not apply on the initial
timeout of SYN-data (active Fast Open). Therefore an active IPv6
Fast Open connection may incur one second RTO penalty to take on
a new path after the second SYN retransmission uses a new flow label.
This patch removes this undesirable behavior so Fast Open changes
the flow label just like the regular connections. This also helps
avoid falsely disabling Fast Open on the sender which triggers
after two consecutive SYN timeouts on Fast Open.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Tue, 8 Jan 2019 23:24:03 +0000 (00:24 +0100)]
net: dsa: mv88x6xxx: mv88e6390 errata
The 6390 copper ports have an errata which require poking magic values
into undocumented magic registers and then performing a software
reset.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Tue, 8 Jan 2019 17:32:42 +0000 (12:32 -0500)]
bonding: update nest level on unlink
A network device stack with multiple layers of bonding devices can
trigger a false positive lockdep warning. Adding lockdep nest levels
fixes this. Update the level on both enslave and unlink, to avoid the
following series of events ..
ip netns add test
ip netns exec test bash
ip link set dev lo addr 00:11:22:33:44:55
ip link set dev lo down
ip link add dev bond1 type bond
ip link add dev bond2 type bond
ip link set dev lo master bond1
ip link set dev bond1 master bond2
ip link set dev bond1 nomaster
ip link set dev bond2 master bond1
.. from still generating a splat:
[ 193.652127] ======================================================
[ 193.658231] WARNING: possible circular locking dependency detected
[ 193.664350] 4.20.0 #8 Not tainted
[ 193.668310] ------------------------------------------------------
[ 193.674417] ip/15577 is trying to acquire lock:
[ 193.678897]
00000000a40e3b69 (&(&bond->stats_lock)->rlock#3/3){+.+.}, at: bond_get_stats+0x58/0x290
[ 193.687851]
but task is already holding lock:
[ 193.693625]
00000000807b9d9f (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0x58/0x290
[..]
[ 193.851092] lock_acquire+0xa7/0x190
[ 193.855138] _raw_spin_lock_nested+0x2d/0x40
[ 193.859878] bond_get_stats+0x58/0x290
[ 193.864093] dev_get_stats+0x5a/0xc0
[ 193.868140] bond_get_stats+0x105/0x290
[ 193.872444] dev_get_stats+0x5a/0xc0
[ 193.876493] rtnl_fill_stats+0x40/0x130
[ 193.880797] rtnl_fill_ifinfo+0x6c5/0xdc0
[ 193.885271] rtmsg_ifinfo_build_skb+0x86/0xe0
[ 193.890091] rtnetlink_event+0x5b/0xa0
[ 193.894320] raw_notifier_call_chain+0x43/0x60
[ 193.899225] netdev_change_features+0x50/0xa0
[ 193.904044] bond_compute_features.isra.46+0x1ab/0x270
[ 193.909640] bond_enslave+0x141d/0x15b0
[ 193.913946] do_set_master+0x89/0xa0
[ 193.918016] do_setlink+0x37c/0xda0
[ 193.921980] __rtnl_newlink+0x499/0x890
[ 193.926281] rtnl_newlink+0x48/0x70
[ 193.930238] rtnetlink_rcv_msg+0x171/0x4b0
[ 193.934801] netlink_rcv_skb+0xd1/0x110
[ 193.939103] rtnetlink_rcv+0x15/0x20
[ 193.943151] netlink_unicast+0x3b5/0x520
[ 193.947544] netlink_sendmsg+0x2fd/0x3f0
[ 193.951942] sock_sendmsg+0x38/0x50
[ 193.955899] ___sys_sendmsg+0x2ba/0x2d0
[ 193.960205] __x64_sys_sendmsg+0xad/0x100
[ 193.964687] do_syscall_64+0x5a/0x460
[ 193.968823] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 7e2556e40026 ("bonding: avoid lockdep confusion in bond_get_stats()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Song Liu [Tue, 8 Jan 2019 22:20:44 +0000 (14:20 -0800)]
bpf: fix panic in stack_map_get_build_id() on i386 and arm32
As Naresh reported, test_stacktrace_build_id() causes panic on i386 and
arm32 systems. This is caused by page_address() returns NULL in certain
cases.
This patch fixes this error by using kmap_atomic/kunmap_atomic instead
of page_address.
Fixes: 615755a77b24 (" bpf: extend stackmap to save binary_build_id+offset instead of address")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Anders Roxell [Tue, 8 Jan 2019 09:23:03 +0000 (10:23 +0100)]
selftests: bpf: install files tcp_(server|client)*.py
When test_tcpbpf_user runs it complains that it can't find files
tcp_server.py and tcp_client.py.
Rework so that tcp_server.py and tcp_client.py gets installed, added them
to the variable TEST_PROGS_EXTENDED.
Fixes: d6d4f60c3a09 ("bpf: add selftest for tcpbpf")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Ioana Ciornei [Wed, 9 Jan 2019 17:06:55 +0000 (17:06 +0000)]
samples: bpf: user proper argument index
Use optind as index for argv instead of a hardcoded value.
When the program has options this leads to improper parameter handling.
Fixes: dc378a1ab5b6 ("samples: bpf: get ifindex from ifname")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Stanislav Fomichev [Wed, 9 Jan 2019 00:07:28 +0000 (16:07 -0800)]
selftests/bpf: add missing executables to .gitignore
We build test_libbpf with CXX to make sure linking against C++ works.
$ make -s -C tools/lib/bpf
$ git status -sb
? tools/lib/bpf/test_libbpf
$ make -s -C tools/testing/selftests/bpf
$ git status -sb
? tools/lib/bpf/test_libbpf
? tools/testing/selftests/bpf/test_libbpf
Fixes: 8c4905b995c6 ("libbpf: make sure bpf headers are c++ include-able")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Eric Dumazet [Tue, 8 Jan 2019 12:06:14 +0000 (04:06 -0800)]
ipv6: fix kernel-infoleak in ipv6_local_error()
This patch makes sure the flow label in the IPv6 header
forged in ipv6_local_error() is initialized.
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
CPU: 1 PID: 24675 Comm: syz-executor1 Not tainted 4.20.0-rc7+ #4
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x173/0x1d0 lib/dump_stack.c:113
kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
kmsan_internal_check_memory+0x455/0xb00 mm/kmsan/kmsan.c:675
kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601
_copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
copy_to_user include/linux/uaccess.h:177 [inline]
move_addr_to_user+0x2e9/0x4f0 net/socket.c:227
___sys_recvmsg+0x5d7/0x1140 net/socket.c:2284
__sys_recvmsg net/socket.c:2327 [inline]
__do_sys_recvmsg net/socket.c:2337 [inline]
__se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334
__x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x457ec9
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f8750c06c78 EFLAGS:
00000246 ORIG_RAX:
000000000000002f
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
0000000000457ec9
RDX:
0000000000002000 RSI:
0000000020000400 RDI:
0000000000000005
RBP:
000000000073bf00 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f8750c076d4
R13:
00000000004c4a60 R14:
00000000004d8140 R15:
00000000ffffffff
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:219 [inline]
kmsan_internal_chain_origin+0x134/0x230 mm/kmsan/kmsan.c:439
__msan_chain_origin+0x70/0xe0 mm/kmsan/kmsan_instr.c:200
ipv6_recv_error+0x1e3f/0x1eb0 net/ipv6/datagram.c:475
udpv6_recvmsg+0x398/0x2ab0 net/ipv6/udp.c:335
inet_recvmsg+0x4fb/0x600 net/ipv4/af_inet.c:830
sock_recvmsg_nosec net/socket.c:794 [inline]
sock_recvmsg+0x1d1/0x230 net/socket.c:801
___sys_recvmsg+0x4d5/0x1140 net/socket.c:2278
__sys_recvmsg net/socket.c:2327 [inline]
__do_sys_recvmsg net/socket.c:2337 [inline]
__se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334
__x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline]
kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158
kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2759 [inline]
__kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383
__kmalloc_reserve net/core/skbuff.c:137 [inline]
__alloc_skb+0x309/0xa20 net/core/skbuff.c:205
alloc_skb include/linux/skbuff.h:998 [inline]
ipv6_local_error+0x1a7/0x9e0 net/ipv6/datagram.c:334
__ip6_append_data+0x129f/0x4fd0 net/ipv6/ip6_output.c:1311
ip6_make_skb+0x6cc/0xcf0 net/ipv6/ip6_output.c:1775
udpv6_sendmsg+0x3f8e/0x45d0 net/ipv6/udp.c:1384
inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
__sys_sendto+0x8c4/0xac0 net/socket.c:1788
__do_sys_sendto net/socket.c:1800 [inline]
__se_sys_sendto+0x107/0x130 net/socket.c:1796
__x64_sys_sendto+0x6e/0x90 net/socket.c:1796
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
Bytes 4-7 of 28 are uninitialized
Memory access of size 28 starts at
ffff8881937bfce0
Data copied to user address
0000000020000000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Konstantin Khlebnikov [Tue, 8 Jan 2019 09:30:00 +0000 (12:30 +0300)]
net/core/neighbour: tell kmemleak about hash tables
This fixes false-positive kmemleak reports about leaked neighbour entries:
unreferenced object 0xffff8885c6e4d0a8 (size 1024):
comm "softirq", pid 0, jiffies
4294922664 (age 167640.804s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 20 2c f3 83 ff ff ff ff ........ ,......
08 c0 ef 5f 84 88 ff ff 01 8c 7d 02 01 00 00 00 ..._......}.....
backtrace:
[<
00000000748509fe>] ip6_finish_output2+0x887/0x1e40
[<
0000000036d7a0d8>] ip6_output+0x1ba/0x600
[<
0000000027ea7dba>] ip6_send_skb+0x92/0x2f0
[<
00000000d6e2111d>] udp_v6_send_skb.isra.24+0x680/0x15e0
[<
000000000668a8be>] udpv6_sendmsg+0x18c9/0x27a0
[<
000000004bd5fa90>] sock_sendmsg+0xb3/0xf0
[<
000000008227b29f>] ___sys_sendmsg+0x745/0x8f0
[<
000000008698009d>] __sys_sendmsg+0xde/0x170
[<
00000000889dacf1>] do_syscall_64+0x9b/0x400
[<
0000000081cdb353>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<
000000005767ed39>] 0xffffffffffffffff
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 7 Jan 2019 23:48:09 +0000 (23:48 +0000)]
net: cxgb4: fix various indentation issues
There are some lines that have indentation issues, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 7 Jan 2019 23:39:24 +0000 (23:39 +0000)]
net: cxgb3: fix various indentation issues
There are handful of lines that have indentation issues, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Mon, 7 Jan 2019 21:47:33 +0000 (16:47 -0500)]
ip: on queued skb use skb_header_pointer instead of pskb_may_pull
Commit
2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call
pskb_may_pull") avoided a read beyond the end of the skb linear
segment by calling pskb_may_pull.
That function can trigger a BUG_ON in pskb_expand_head if the skb is
shared, which it is when when peeking. It can also return ENOMEM.
Avoid both by switching to safer skb_header_pointer.
Fixes: 2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull")
Reported-by: syzbot <syzkaller@googlegroups.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stanislav Fomichev [Mon, 7 Jan 2019 21:38:38 +0000 (13:38 -0800)]
tun: publish tfile after it's fully initialized
BUG: unable to handle kernel NULL pointer dereference at
00000000000000d1
Call Trace:
? napi_gro_frags+0xa7/0x2c0
tun_get_user+0xb50/0xf20
tun_chr_write_iter+0x53/0x70
new_sync_write+0xff/0x160
vfs_write+0x191/0x1e0
__x64_sys_write+0x5e/0xd0
do_syscall_64+0x47/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
I think there is a subtle race between sending a packet via tap and
attaching it:
CPU0: CPU1:
tun_chr_ioctl(TUNSETIFF)
tun_set_iff
tun_attach
rcu_assign_pointer(tfile->tun, tun);
tun_fops->write_iter()
tun_chr_write_iter
tun_napi_alloc_frags
napi_get_frags
napi->skb = napi_alloc_skb
tun_napi_init
netif_napi_add
napi->skb = NULL
napi->skb is NULL here
napi_gro_frags
napi_frags_skb
skb = napi->skb
skb_reset_mac_header(skb)
panic()
Move rcu_assign_pointer(tfile->tun) and rcu_assign_pointer(tun->tfiles) to
be the last thing we do in tun_attach(); this should guarantee that when we
call tun_get() we always get an initialized object.
v2 changes:
* remove extra napi_mutex locks/unlocks for napi operations
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Wed, 9 Jan 2019 02:12:24 +0000 (18:12 -0800)]
bpf: correctly set initial window on active Fast Open sender
The existing BPF TCP initial congestion window (TCP_BPF_IW) does not
to work on (active) Fast Open sender. This is because it changes the
(initial) window only if data_segs_out is zero -- but data_segs_out
is also incremented on SYN-data. This patch fixes the issue by
proerly accounting for SYN-data additionally.
Fixes: fc7478103c84 ("bpf: Adds support for setting initial cwnd")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jason Gunthorpe [Tue, 8 Jan 2019 23:27:06 +0000 (23:27 +0000)]
packet: Do not leak dev refcounts on error exit
'dev' is non NULL when the addr_len check triggers so it must goto a label
that does the dev_put otherwise dev will have a leaked refcount.
This bug causes the ib_ipoib module to become unloadable when using
systemd-network as it triggers this check on InfiniBand links.
Fixes: 99137b7888f4 ("packet: validate address length")
Reported-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 Jan 2019 21:53:54 +0000 (16:53 -0500)]
Merge branch 'mlxsw-fixes'
Daniel Borkmann says:
====================
pull-request: bpf 2019-01-08
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix BSD'ism in sendmsg(2) to rewrite unspecified IPv6 dst for
unconnected UDP sockets with [::1] _after_ cgroup BPF invocation,
from Andrey.
2) Follow-up fix to the speculation fix where we need to reject a
corner case for sanitation when ptr and scalars are mixed in the
same alu op. Also, some unrelated minor doc fixes, from Daniel.
3) Fix BPF kselftest's incorrect uses of create_and_get_cgroup()
by not assuming fd of zero value to be the result of an error
case, from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 8 Jan 2019 16:48:14 +0000 (16:48 +0000)]
selftests: forwarding: Add a test for VLAN deletion
Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is
not affected.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 8 Jan 2019 16:48:13 +0000 (16:48 +0000)]
mlxsw: spectrum_switchdev: Set PVID correctly during VLAN deletion
When a VLAN is deleted from a bridge port we should not change the PVID
unless the deleted VLAN is the PVID.
Fixes: fe9ccc785de5 ("mlxsw: spectrum_switchdev: Don't batch VLAN operations")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 8 Jan 2019 16:48:12 +0000 (16:48 +0000)]
selftests: forwarding: Fix test for different devices
When running the test on the Spectrum ASIC the generated packets are
counted on the ingress filter and injected back to the pipeline because
of the 'pass' action. The router block then drops the packets due to
checksum error, as the test generates packets with zero checksum.
When running the test on an emulator that is not as strict about
checksum errors the test fails since packets are counted twice. Once by
the emulated ASIC on its ingress filter and again by the kernel as the
emulator does not perform checksum validation and allows the packets to
be trapped by a matching host route.
Fix this by changing the action to 'drop', which will prevent the packet
from continuing further in the pipeline to the router block.
For veth pairs this change is essentially a NOP given packets are only
processed once (by the kernel).
Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 8 Jan 2019 16:48:11 +0000 (16:48 +0000)]
net: bridge: Fix VLANs memory leak
When adding / deleting VLANs to / from a bridge port, the bridge driver
first tries to propagate the information via switchdev and falls back to
the 8021q driver in case the underlying driver does not support
switchdev. This can result in a memory leak [1] when VXLAN and mlxsw
ports are enslaved to the bridge:
$ ip link set dev vxlan0 master br0
# No mlxsw ports are enslaved to 'br0', so mlxsw ignores the switchdev
# notification and the bridge driver adds the VLAN on 'vxlan0' via the
# 8021q driver
$ bridge vlan add vid 10 dev vxlan0 pvid untagged
# mlxsw port is enslaved to the bridge
$ ip link set dev swp1 master br0
# mlxsw processes the switchdev notification and the 8021q driver is
# skipped
$ bridge vlan del vid 10 dev vxlan0
This results in 'struct vlan_info' and 'struct vlan_vid_info' being
leaked, as they were allocated by the 8021q driver during VLAN addition,
but never freed as the 8021q driver was skipped during deletion.
Fix this by introducing a new VLAN private flag that indicates whether
the VLAN was added on the port by switchdev or the 8021q driver. If the
VLAN was added by the 8021q driver, then we make sure to delete it via
the 8021q driver as well.
[1]
unreferenced object 0xffff88822d20b1e8 (size 256):
comm "bridge", pid 2532, jiffies
4295216998 (age 1188.830s)
hex dump (first 32 bytes):
e0 42 97 ce 81 88 ff ff 00 00 00 00 00 00 00 00 .B..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330
[<
00000000e0178b02>] vlan_vid_add+0x661/0x920
[<
00000000218ebd5f>] __vlan_add+0x1be9/0x3a00
[<
000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90
[<
000000003535392c>] br_vlan_info+0x132/0x410
[<
00000000aedaa9dc>] br_afspec+0x75c/0x870
[<
00000000f5716133>] br_setlink+0x3dc/0x6d0
[<
00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30
[<
00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80
[<
0000000064097e69>] netlink_rcv_skb+0x152/0x3c0
[<
000000008be8d614>] rtnetlink_rcv+0x21/0x30
[<
000000009ab2ca25>] netlink_unicast+0x52f/0x740
[<
00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50
[<
000000005d1e2050>] sock_sendmsg+0xbe/0x120
[<
00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0
[<
00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270
unreferenced object 0xffff888227454308 (size 32):
comm "bridge", pid 2532, jiffies
4295216998 (age 1188.882s)
hex dump (first 32 bytes):
88 b2 20 2d 82 88 ff ff 88 b2 20 2d 82 88 ff ff .. -...... -....
81 00 0a 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330
[<
0000000018050631>] vlan_vid_add+0x3e6/0x920
[<
00000000218ebd5f>] __vlan_add+0x1be9/0x3a00
[<
000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90
[<
000000003535392c>] br_vlan_info+0x132/0x410
[<
00000000aedaa9dc>] br_afspec+0x75c/0x870
[<
00000000f5716133>] br_setlink+0x3dc/0x6d0
[<
00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30
[<
00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80
[<
0000000064097e69>] netlink_rcv_skb+0x152/0x3c0
[<
000000008be8d614>] rtnetlink_rcv+0x21/0x30
[<
000000009ab2ca25>] netlink_unicast+0x52f/0x740
[<
00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50
[<
000000005d1e2050>] sock_sendmsg+0xbe/0x120
[<
00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0
[<
00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270
Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: bridge@lists.linux-foundation.org
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 8 Jan 2019 16:48:10 +0000 (16:48 +0000)]
selftests: mlxsw: Add a test case for VLAN addition error flow
Add a test case for the issue fixed by previous commit. In case the
offloading of an unsupported VxLAN tunnel was triggered by adding the
mapped VLAN to a local port, then error should be returned to the user.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 8 Jan 2019 16:48:08 +0000 (16:48 +0000)]
mlxsw: spectrum_nve: Replace error code with EINVAL
Adding a VLAN on a port can trigger the offload of a VXLAN tunnel which
is already a member in the VLAN. In case the configuration of the VXLAN
is not supported, the driver would return -EOPNOTSUPP.
This is problematic since bridge code does not interpret this as error,
but rather that it should try to setup the VLAN using the 8021q driver
instead of switchdev.
Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 8 Jan 2019 16:48:07 +0000 (16:48 +0000)]
mlxsw: spectrum_switchdev: Avoid returning errors in commit phase
Drivers are not supposed to return errors in switchdev commit phase if
they returned OK in prepare phase. Otherwise, a WARNING is emitted.
However, when the offloading of a VXLAN tunnel is triggered by the
addition of a VLAN on a local port, it is not possible to guarantee that
the commit phase will succeed without doing a lot of work.
In these cases, the artificial division between prepare and commit phase
does not make sense, so simply do the work in the prepare phase.
Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 8 Jan 2019 16:48:06 +0000 (16:48 +0000)]
mlxsw: spectrum: Add VXLAN dependency for spectrum
When VXLAN is a loadable module, MLXSW_SPECTRUM must not be built-in:
drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:2547: undefined
reference to `vxlan_fdb_find_uc'
Add Kconfig dependency to enforce usable configurations.
Fixes: 1231e04f5bba ("mlxsw: spectrum_switchdev: Add support for VxLAN encapsulation")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 8 Jan 2019 16:48:05 +0000 (16:48 +0000)]
mlxsw: spectrum: Disable lag port TX before removing it
Make sure that lag port TX is disabled before mlxsw_sp_port_lag_leave()
is called and prevent from possible EMAD error.
Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Tue, 8 Jan 2019 16:48:04 +0000 (16:48 +0000)]
mlxsw: spectrum_acl: Remove ASSERT_RTNL()s in module removal flow
Removal of the mlxsw driver on Spectrum-2 platforms hits an ASSERT_RTNL()
in Spectrum-2 ACL Bloom filter and in ERP removal paths. This happens
because the multicast router implementation in Spectrum-2 relies on ACLs.
Taking the RTNL lock upon driver removal is useless since the driver first
removes its ports and unregisters from notifiers so concurrent writes
cannot happen at that time. The assertions were originally put as a
reminder for future work involving ERP background optimization, but having
these assertions only during addition serves this purpose as well.
Therefore remove the ASSERT_RTNL() in both places related to ERP and Bloom
filter removal.
Fixes: cf7221a4f5a5 ("mlxsw: spectrum_router: Add Multicast routing support for Spectrum-2")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Tue, 8 Jan 2019 16:48:03 +0000 (16:48 +0000)]
mlxsw: spectrum_acl: Add cleanup after C-TCAM update error condition
When writing to C-TCAM, mlxsw driver uses cregion->ops->entry_insert().
In case of C-TCAM HW insertion error, the opposite action should take
place.
Add error handling case in which the C-TCAM region entry is removed, by
calling cregion->ops->entry_remove().
Fixes: a0a777b9409f ("mlxsw: spectrum_acl: Start using A-TCAM")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Mon, 7 Jan 2019 20:49:09 +0000 (21:49 +0100)]
r8169: load Realtek PHY driver module before r8169
This soft dependency works around an issue where sometimes the genphy
driver is used instead of the dedicated PHY driver. The root cause of
the issue isn't clear yet. People reported the unloading/re-loading
module r8169 helps, and also configuring this soft dependency in
the modprobe config files. Important just seems to be that the
realtek module is loaded before r8169.
Once this has been applied preliminary fix
38af4b903210 ("net: phy:
add workaround for issue where PHY driver doesn't bind to the device")
will be removed.
Fixes: f1e911d5d0df ("r8169: add basic phylib support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bryan Whitehead [Mon, 7 Jan 2019 19:00:09 +0000 (14:00 -0500)]
lan743x: Remove phy_read from link status change function
It has been noticed that some phys do not have the registers
required by the previous implementation.
To fix this, instead of using phy_read, the required information
is extracted from the phy_device structure.
fixes:
23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eugene Syromiatnikov [Mon, 7 Jan 2019 15:22:38 +0000 (16:22 +0100)]
ptp: uapi: change _IOW to IOWR in PTP_SYS_OFFSET_EXTENDED definition
The ioctl command is read/write (or just read, if the fact that user space
writes n_samples field is ignored).
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eugene Syromiatnikov [Mon, 7 Jan 2019 15:22:29 +0000 (16:22 +0100)]
ptp: check that rsv field is zero in struct ptp_sys_offset_extended
Otherwise it is impossible to use it for something else, as it will break
userspace that puts garbage there.
The same check should be done in other structures, but the fact that
data in reserved fields is ignored is already part of the kernel ABI.
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 Jan 2019 03:49:35 +0000 (22:49 -0500)]
Merge ra./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2019-01-08
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix BSD'ism in sendmsg(2) to rewrite unspecified IPv6 dst for
unconnected UDP sockets with [::1] _after_ cgroup BPF invocation,
from Andrey.
2) Follow-up fix to the speculation fix where we need to reject a
corner case for sanitation when ptr and scalars are mixed in the
same alu op. Also, some unrelated minor doc fixes, from Daniel.
3) Fix BPF kselftest's incorrect uses of create_and_get_cgroup()
by not assuming fd of zero value to be the result of an error
case, from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Mon, 7 Jan 2019 23:52:00 +0000 (15:52 -0800)]
Merge branch 'bpf-doc-updates'
Daniel Borkmann says:
====================
Two trivial doc follow-ups to i) remove deprecated kern_version
mentioning in the design qa and ii) to mention stand-alone build
and license of libbpf. Thanks!
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Mon, 7 Jan 2019 21:57:18 +0000 (22:57 +0100)]
bpf, doc: add note for libbpf's stand-alone build
Given this came up couple of times, add a note to libbpf's readme
about the semi-automated mirror for a stand-alone build which is
officially managed by BPF folks. While at it, also explicitly state
the libbpf license in the readme file.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Mon, 7 Jan 2019 21:57:17 +0000 (22:57 +0100)]
bpf, doc: update design qa to reflect kern_version requirement
Update the bpf_design_QA.rst to also reflect recent changes in
6c4fc209fcf9 ("bpf: remove useless version check for prog load").
Suggested-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stanislav Fomichev [Mon, 7 Jan 2019 17:46:46 +0000 (09:46 -0800)]
selftests/bpf: fix incorrect users of create_and_get_cgroup
We have some tests that assume create_and_get_cgroup returns -1 on error
which is incorrect (it returns 0 on error). Since fd might be zero in
general case, change create_and_get_cgroup to return -1 on error
and fix the users that assume 0 on error.
Fixes: f269099a7e7a ("tools/bpf: add a selftest for bpf_get_current_cgroup_id() helper")
Fixes: 7d2c6cfc5411 ("bpf: use --cgroup in test_suite if supplied")
v2:
- instead of fixing the uses that assume -1 on error, convert the users
that assume 0 on error (fd might be zero in general case)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cong Wang [Sun, 6 Jan 2019 07:45:26 +0000 (23:45 -0800)]
smc: move unhash as early as possible in smc_release()
In smc_release() we release smc->clcsock before unhash the smc
sock, but a parallel smc_diag_dump() may be still reading
smc->clcsock, therefore this could cause a use-after-free as
reported by syzbot.
Reported-and-tested-by: syzbot+fbd1e5476e4c94c7b34e@syzkaller.appspotmail.com
Fixes: 51f1de79ad8e ("net/smc: replace sock_put worker by socket refcounting")
Cc: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reported-by: syzbot+0bf2e01269f1274b4b03@syzkaller.appspotmail.com
Reported-by: syzbot+e3132895630f957306bc@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Gunthorpe [Mon, 7 Jan 2019 17:54:14 +0000 (17:54 +0000)]
phy: ti: Fix compilation failures without REGMAP
This driver requires regmap or the compile fails:
drivers/phy/ti/phy-gmii-sel.c:43:27: error: array type has incomplete element type ‘struct reg_field’
const struct reg_field (*regfields)[PHY_GMII_SEL_LAST];
Add it to kconfig.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
JianJhen Chen [Sun, 6 Jan 2019 03:28:13 +0000 (11:28 +0800)]
net: bridge: fix a bug on using a neighbour cache entry without checking its state
When handling DNAT'ed packets on a bridge device, the neighbour cache entry
from lookup was used without checking its state. It means that a cache entry
in the NUD_STALE state will be used directly instead of entering the NUD_DELAY
state to confirm the reachability of the neighbor.
This problem becomes worse after commit
2724680bceee ("neigh: Keep neighbour
cache entries if number of them is small enough."), since all neighbour cache
entries in the NUD_STALE state will be kept in the neighbour table as long as
the number of cache entries does not exceed the value specified in gc_thresh1.
This commit validates the state of a neighbour cache entry before using
the entry.
Signed-off-by: JianJhen Chen <kchen@synology.com>
Reviewed-by: JinLin Chen <jlchen@synology.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Sat, 5 Jan 2019 16:52:23 +0000 (10:52 -0600)]
tipc: fix memory leak in tipc_nl_compat_publ_dump
There is a memory leak in case genlmsg_put fails.
Fix this by freeing *args* before return.
Addresses-Coverity-ID:
1476406 ("Resource leak")
Fixes: 46273cf7e009 ("tipc: fix a missing check of genlmsg_put")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Sat, 5 Jan 2019 13:32:39 +0000 (14:32 +0100)]
cdc_ether: trivial whitespace readability fix
This function is unreadable enough without indenting mismatches
and unnecessary line breaks.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Wen [Mon, 7 Jan 2019 01:59:59 +0000 (09:59 +0800)]
rds: use DIV_ROUND_UP instead of ceil
Yes indeed, DIV_ROUND_UP is in kernel.h.
Signed-off-by: Jacob Wen <jian.w.wen@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 6 Jan 2019 19:44:00 +0000 (20:44 +0100)]
r8169: don't try to read counters if chip is in a PCI power-save state
Avoid log spam caused by trying to read counters from the chip whilst
it is in a PCI power-save state.
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=107421
Fixes: 1ef7286e7f36 ("r8169: Dereference MMIO address immediately before use")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver Hartkopp [Fri, 4 Jan 2019 14:55:26 +0000 (15:55 +0100)]
can: gw: ensure DLC boundaries after CAN frame modification
Muyu Yu provided a POC where user root with CAP_NET_ADMIN can create a CAN
frame modification rule that makes the data length code a higher value than
the available CAN frame data size. In combination with a configured checksum
calculation where the result is stored relatively to the end of the data
(e.g. cgw_csum_xor_rel) the tail of the skb (e.g. frag_list pointer in
skb_shared_info) can be rewritten which finally can cause a system crash.
Michael Kubecek suggested to drop frames that have a DLC exceeding the
available space after the modification process and provided a patch that can
handle CAN FD frames too. Within this patch we also limit the length for the
checksum calculations to the maximum of Classic CAN data length (8).
CAN frames that are dropped by these additional checks are counted with the
CGW_DELETED counter which indicates misconfigurations in can-gw rules.
This fixes CVE-2019-3701.
Reported-by: Muyu Yu <ieatmuttonchuan@gmail.com>
Reported-by: Marcus Meissner <meissner@suse.de>
Suggested-by: Michal Kubecek <mkubecek@suse.cz>
Tested-by: Muyu Yu <ieatmuttonchuan@gmail.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.2
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Warren [Thu, 3 Jan 2019 17:23:24 +0000 (10:23 -0700)]
net/mlx4: replace pci_{,un}map_sg with dma_{,un}map_sg
pci_{,un}map_sg are deprecated and replaced by dma_{,un}map_sg. This is
especially relevant since the rest of the driver uses the DMA API. Fix
the driver to use the replacement APIs.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Warren [Thu, 3 Jan 2019 17:23:23 +0000 (10:23 -0700)]
net/mlx4: Get rid of page operation after dma_alloc_coherent
This patch solves a crash at the time of mlx4 driver unload or system
shutdown. The crash occurs because dma_alloc_coherent() returns one
value in mlx4_alloc_icm_coherent(), but a different value is passed to
dma_free_coherent() in mlx4_free_icm_coherent(). In turn this is because
when allocated, that pointer is passed to sg_set_buf() to record it,
then when freed it is re-calculated by calling
lowmem_page_address(sg_page()) which returns a different value. Solve
this by recording the value that dma_alloc_coherent() returns, and
passing this to dma_free_coherent().
This patch is roughly equivalent to commit
378efe798ecf ("RDMA/hns: Get
rid of page operation after dma_alloc_coherent").
Based-on-code-from: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Sun, 6 Jan 2019 05:32:39 +0000 (21:32 -0800)]
Merge branch 'reject-ptr-scalar-mix'
Daniel Borkmann says:
====================
Follow-up fix to
979d63d50c0c ("bpf: prevent out of bounds speculation
on pointer arithmetic") in order to reject a corner case for sanitation
when ptr / scalars are mixed in the same alu op.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Sat, 5 Jan 2019 23:54:38 +0000 (00:54 +0100)]
bpf: add various test cases for alu op on mixed dst register types
Add couple of test_verifier tests to check sanitation of alu op insn
with pointer and scalar type coming from different paths. This also
includes BPF insns of the test reproducer provided by Jann Horn.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Sat, 5 Jan 2019 23:54:37 +0000 (00:54 +0100)]
bpf: fix sanitation of alu op with pointer / scalar type from different paths
While
979d63d50c0c ("bpf: prevent out of bounds speculation on pointer
arithmetic") took care of rejecting alu op on pointer when e.g. pointer
came from two different map values with different map properties such as
value size, Jann reported that a case was not covered yet when a given
alu op is used in both "ptr_reg += reg" and "numeric_reg += reg" from
different branches where we would incorrectly try to sanitize based
on the pointer's limit. Catch this corner case and reject the program
instead.
Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Ahern [Sat, 5 Jan 2019 15:35:04 +0000 (07:35 -0800)]
ipv6: Take rcu_read_lock in __inet6_bind for mapped addresses
I realized the last patch calls dev_get_by_index_rcu in a branch not
holding the rcu lock. Add the calls to rcu_read_lock and rcu_read_unlock.
Fixes: ec90ad334986 ("ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Sat, 5 Jan 2019 04:23:33 +0000 (20:23 -0800)]
Merge branch 'udpv6_sendmsg-addr_any-fix'
Andrey Ignatov says:
====================
The patch set fixes BSD'ism in sys_sendmsg to rewrite unspecified
destination IPv6 for unconnected UDP sockets in sys_sendmsg with [::1] in
case when either CONFIG_CGROUP_BPF is enabled or when sys_sendmsg BPF hook
sets destination IPv6 to [::].
Patch 1 is the fix and provides more details.
Patch 2 adds two test cases to verify the fix.
v1->v2:
* Fix compile error in patch 1.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrey Ignatov [Fri, 4 Jan 2019 09:07:08 +0000 (01:07 -0800)]
selftests/bpf: Test [::] -> [::1] rewrite in sys_sendmsg in test_sock_addr
Test that sys_sendmsg BPF hook doesn't break sys_sendmsg behaviour to
rewrite destination IPv6 = [::] with [::1] (BSD'ism).
Two test cases are added:
1) User passes dst IPv6 = [::] and BPF_CGROUP_UDP6_SENDMSG program
doesn't touch it.
2) User passes dst IPv6 != [::], but BPF_CGROUP_UDP6_SENDMSG program
rewrites it with [::].
In both cases [::1] is used by sys_sendmsg code eventually and datagram
is sent successfully for unconnected UDP socket.
Example of relevant output:
Test case: sendmsg6: set dst IP = [::] (BSD'ism) .. [PASS]
Test case: sendmsg6: preserve dst IP = [::] (BSD'ism) .. [PASS]
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrey Ignatov [Fri, 4 Jan 2019 09:07:07 +0000 (01:07 -0800)]
bpf: Fix [::] -> [::1] rewrite in sys_sendmsg
sys_sendmsg has supported unspecified destination IPv6 (wildcard) for
unconnected UDP sockets since
876c7f41. When [::] is passed by user as
destination, sys_sendmsg rewrites it with [::1] to be consistent with
BSD (see "BSD'ism" comment in the code).
This didn't work when cgroup-bpf was enabled though since the rewrite
[::] -> [::1] happened before passing control to cgroup-bpf block where
fl6.daddr was updated with passed by user sockaddr_in6.sin6_addr (that
might or might not be changed by BPF program). That way if user passed
[::] as dst IPv6 it was first rewritten with [::1] by original code from
876c7f41, but then rewritten back with [::] by cgroup-bpf block.
It happened even when BPF_CGROUP_UDP6_SENDMSG program was not present
(CONFIG_CGROUP_BPF=y was enough).
The fix is to apply BSD'ism after cgroup-bpf block so that [::] is
replaced with [::1] no matter where it came from: passed by user to
sys_sendmsg or set by BPF_CGROUP_UDP6_SENDMSG program.
Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg")
Reported-by: Nitin Rawat <nitin.rawat@intel.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Ahern [Sat, 5 Jan 2019 00:58:15 +0000 (16:58 -0800)]
ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address
Similar to
c5ee066333eb ("ipv6: Consider sk_bound_dev_if when binding a
socket to an address"), binding a socket to v4 mapped addresses needs to
consider if the socket is bound to a device.
This problem also exists from the beginning of git history.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher [Fri, 4 Jan 2019 18:48:02 +0000 (10:48 -0800)]
ixgbe: fix Kconfig when driver is not a module
The new ability added to the driver to use mii_bus to handle MII related
ioctls is causing compile issues when the driver is compiled into the
kernel (i.e. not a module).
The problem was in selecting MDIO_DEVICE instead of the preferred PHYLIB
Kconfig option. The reason being that MDIO_DEVICE had a dependency on
PHYLIB and would be compiled as a module when PHYLIB was a module, no
matter whether ixgbe was compiled into the kernel.
CC: Dave Jones <davej@codemonkey.org.uk>
CC: Steve Douthit <stephend@silicom-usa.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Reviewed-by: Stephen Douthit <stephend@silicom-usa.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 4 Jan 2019 19:00:00 +0000 (11:00 -0800)]
ipv6: make icmp6_send() robust against null skb->dev
syzbot was able to crash one host with the following stack trace :
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 8625 Comm: syz-executor4 Not tainted 4.20.0+ #8
RIP: 0010:dev_net include/linux/netdevice.h:2169 [inline]
RIP: 0010:icmp6_send+0x116/0x2d30 net/ipv6/icmp.c:426
icmpv6_send
smack_socket_sock_rcv_skb
security_sock_rcv_skb
sk_filter_trim_cap
__sk_receive_skb
dccp_v6_do_rcv
release_sock
This is because a RX packet found socket owned by user and
was stored into socket backlog. Before leaving RCU protected section,
skb->dev was cleared in __sk_receive_skb(). When socket backlog
was finally handled at release_sock() time, skb was fed to
smack_socket_sock_rcv_skb() then icmp6_send()
We could fix the bug in smack_socket_sock_rcv_skb(), or simply
make icmp6_send() more robust against such possibility.
In the future we might provide to icmp6_send() the net pointer
instead of infering it.
Fixes: d66a8acbda92 ("Smack: Inform peer that IPv6 traffic has been blocked")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Piotr Sawicki <p.sawicki2@partner.samsung.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Oskolkov [Fri, 4 Jan 2019 17:43:08 +0000 (09:43 -0800)]
selftests: net: fix/improve ip_defrag selftest
Commit
ade446403bfb ("net: ipv4: do not handle duplicate fragments as
overlapping") changed IPv4 defragmentation so that duplicate fragments,
as well as _some_ fragments completely covered by previously delivered
fragments, do not lead to the whole frag queue being discarded. This
makes the existing ip_defrag selftest flaky.
This patch
* makes sure that negative IPv4 defrag tests generate truly overlapping
fragments that trigger defrag queue drops;
* tests that duplicate IPv4 fragments do not trigger defrag queue drops;
* makes a couple of minor tweaks to the test aimed at increasing its code
coverage and reduce flakiness.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniele Palmas [Fri, 4 Jan 2019 12:26:10 +0000 (13:26 +0100)]
qmi_wwan: add MTU default to qmap network interface
This patch adds MTU default value to qmap network interface in
order to avoid "RTNETLINK answers: No buffer space available"
error when setting an ipv6 address.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 4 Jan 2019 21:33:57 +0000 (13:33 -0800)]
Merge branch 'hns-fixes'
Huazhong Tan says:
====================
net: hns: Bugfixes for HNS driver
This patchset includes bugfixes for the HNS ethernet controller driver.
Every patch is independent.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Fri, 4 Jan 2019 12:18:11 +0000 (20:18 +0800)]
net: hns: Fix use after free identified by SLUB debug
When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will
identify a use after free bug:
[134.189505] Unable to handle kernel paging request at virtual address
006b6b6b6b6b6b6b
[134.197553] Mem abort info:
[134.200381] ESR = 0x96000004
[134.203487] Exception class = DABT (current EL), IL = 32 bits
[134.209497] SET = 0, FnV = 0
[134.212596] EA = 0, S1PTW = 0
[134.215777] Data abort info:
[134.218701] ISV = 0, ISS = 0x00000004
[134.222596] CM = 0, WnR = 0
[134.225606] [
006b6b6b6b6b6b6b] address between user and kernel address ranges
[134.232851] Internal error: Oops:
96000004 [#1] SMP
[134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G
OE 4.19.5-1.2.34.aarch64 #1
[134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018
[134.255181] pstate:
20000005 (nzCv daif -PAN -UAO)
[134.260044] pc : hns_ae_put_handle+0x38/0x60
[134.264372] lr : hns_ae_put_handle+0x24/0x60
[134.268700] sp :
ffff00001be93c50
[134.272054] x29:
ffff00001be93c50 x28:
ffff802faaec8040
[134.277442] x27:
0000000000000000 x26:
0000000000000000
[134.282830] x25:
0000000056000000 x24:
0000000000000015
[134.288284] x23:
ffff0000096fe098 x22:
ffff000001050070
[134.293671] x21:
ffff801fb3c044a0 x20:
ffff80afb75ec098
[134.303287] x19:
ffff80afb75ec098 x18:
0000000000000000
[134.312945] x17:
0000000000000000 x16:
0000000000000000
[134.322517] x15:
0000000000000002 x14:
0000000000000000
[134.332030] x13:
dead000000000100 x12:
ffff7e02bea3c988
[134.341487] x11:
ffff80affbee9e68 x10:
0000000000000000
[134.351033] x9 :
6fffff8000008101 x8 :
0000000000000000
[134.360569] x7 :
dead000000000100 x6 :
ffff000009579748
[134.370059] x5 :
0000000000210d00 x4 :
0000000000000000
[134.379550] x3 :
0000000000000001 x2 :
0000000000000000
[134.388813] x1 :
6b6b6b6b6b6b6b6b x0 :
0000000000000000
[134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd)
[134.408498] Call trace:
[134.414611] hns_ae_put_handle+0x38/0x60
[134.422208] hnae_put_handle+0xd4/0x108
[134.429563] hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv]
[134.438342] platform_drv_remove+0x2c/0x70
[134.445958] device_release_driver_internal+0x174/0x208
[134.454810] driver_detach+0x70/0xd8
[134.461913] bus_remove_driver+0x64/0xe8
[134.469396] driver_unregister+0x34/0x60
[134.476822] platform_driver_unregister+0x20/0x30
[134.485130] hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv]
[134.494634] __arm64_sys_delete_module+0x238/0x290
struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is
freed, than use hnae_handle will cause use after free panic.
This patch frees vf_cb after hnae_handle used.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Fri, 4 Jan 2019 12:18:10 +0000 (20:18 +0800)]
net: hns: Fix WARNING when hns modules installed
Commit
308c6cafde01 ("net: hns: All ports can not work when insmod hns ko
after rmmod.") add phy_stop in hns_nic_init_phy(), In the branch of "net",
this method is effective, but in the branch of "net-next", it will cause
a WARNING when hns modules loaded, reference to commit
2b3e88ea6528 ("net:
phy: improve phy state checking"):
[10.092168] ------------[ cut here ]------------
[10.092171] called from state READY
[10.092189] WARNING: CPU: 4 PID: 1 at ../drivers/net/phy/phy.c:854
phy_stop+0x90/0xb0
[10.092192] Modules linked in:
[10.092197] CPU: 4 PID:1 Comm:swapper/0 Not tainted 4.20.0-rc7-next-
20181220 #1
[10.092200] Hardware name: Huawei TaiShan 2280 /D05, BIOS Hisilicon D05 UEFI
16.12 Release 05/15/2017
[10.092202] pstate:
60000005 (nZCv daif -PAN -UAO)
[10.092205] pc : phy_stop+0x90/0xb0
[10.092208] lr : phy_stop+0x90/0xb0
[10.092209] sp :
ffff00001159ba90
[10.092212] x29:
ffff00001159ba90 x28:
0000000000000007
[10.092215] x27:
ffff000011180068 x26:
ffff0000110a5620
[10.092218] x25:
ffff0000113b6000 x24:
ffff842f96dac000
[10.092221] x23:
0000000000000000 x22:
0000000000000000
[10.092223] x21:
ffff841fb8425e18 x20:
ffff801fb3a56438
[10.092226] x19:
ffff801fb3a56000 x18:
ffffffffffffffff
[10.092228] x17:
0000000000000000 x16:
0000000000000000
[10.092231] x15:
ffff00001122d6c8 x14:
ffff00009159b7b7
[10.092234] x13:
ffff00001159b7c5 x12:
ffff000011245000
[10.092236] x11:
0000000005f5e0ff x10:
ffff00001159b750
[10.092239] x9 :
00000000ffffffd0 x8 :
0000000000000465
[10.092242] x7 :
ffff0000112457f8 x6 :
ffff0000113bd7ce
[10.092245] x5 :
0000000000000000 x4 :
0000000000000000
[10.092247] x3 :
00000000ffffffff x2 :
ffff000011245828
[10.092250] x1 :
4b5860bd05871300 x0 :
0000000000000000
[10.092253] Call trace:
[10.092255] phy_stop+0x90/0xb0
[10.092260] hns_nic_init_phy+0xf8/0x110
[10.092262] hns_nic_try_get_ae+0x4c/0x3b0
[10.092264] hns_nic_dev_probe+0x1fc/0x480
[10.092268] platform_drv_probe+0x50/0xa0
[10.092271] really_probe+0x1f4/0x298
[10.092273] driver_probe_device+0x58/0x108
[10.092275] __driver_attach+0xdc/0xe0
[10.092278] bus_for_each_dev+0x74/0xc8
[10.092280] driver_attach+0x20/0x28
[10.092283] bus_add_driver+0x1b8/0x228
[10.092285] driver_register+0x60/0x110
[10.092288] __platform_driver_register+0x40/0x48
[10.092292] hns_nic_dev_driver_init+0x18/0x20
[10.092296] do_one_initcall+0x5c/0x180
[10.092299] kernel_init_freeable+0x198/0x240
[10.092303] kernel_init+0x10/0x108
[10.092306] ret_from_fork+0x10/0x18
[10.092308] ---[ end trace
1396dd0278e397eb ]---
This WARNING occurred because of calling phy_stop before phy_start.
The root cause of the problem in commit '
308c6cafde01' is:
Reference to hns_nic_init_phy, the flag phydev->supported is changed after
phy_connect_direct. The flag phydev->supported is 0x6ff when hns modules is
loaded, so will not change Fiber Port power(Reference to marvell.c), which
is power on at default.
Then the flag phydev->supported is changed to 0x6f, so Fiber Port power is
off when removing hns modules.
When hns modules installed again, the flag phydev->supported is default
value 0x6ff, so will not change Fiber Port power(now is off), causing mac
link not up problem.
So the solution is change phy flags before phy_connect_direct.
Fixes: 308c6cafde01 ("net: hns: All ports can not work when insmod hns ko after rmmod.")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Walleij [Thu, 3 Jan 2019 21:31:32 +0000 (22:31 +0100)]
net: dsa: mt7530: Drop unused GPIO include
This driver uses GPIO descriptors only, <linux/of_gpio.h>
is not used so drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 4 Jan 2019 21:06:07 +0000 (13:06 -0800)]
Merge branch 'GUE-error-recursion'
Stefano Brivio says:
====================
Fix two further potential unbounded recursions in GUE error handlers
Patch 1/2 takes care of preventing the issue fixed by commit
11789039da53
("fou: Prevent unbounded recursion in GUE error handler") also with
UDP-Lite payloads -- I just realised this might happen from a syzbot
report.
Patch 2/2 fixes the issue for both UDP and UDP-Lite on IPv6, which I also
forgot to deal with in that same commit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Thu, 3 Jan 2019 20:43:35 +0000 (21:43 +0100)]
fou6: Prevent unbounded recursion in GUE error handler
I forgot to deal with IPv6 in commit
11789039da53 ("fou: Prevent unbounded
recursion in GUE error handler").
Now syzbot reported what might be the same type of issue, caused by
gue6_err(), that is, handling exceptions for direct UDP encapsulation in
GUE (UDP-in-UDP) leads to unbounded recursion in the GUE exception
handler.
As it probably doesn't make sense to set up GUE this way, and it's
currently not even possible to configure this, skip exception handling for
UDP (or UDP-Lite) packets encapsulated in UDP (or UDP-Lite) packets with
GUE on IPv6.
Reported-by: syzbot+4ad25edc7a33e4ab91e0@syzkaller.appspotmail.com
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: b8a51b38e4d4 ("fou, fou6: ICMP error handlers for FoU and GUE")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Thu, 3 Jan 2019 20:43:34 +0000 (21:43 +0100)]
fou: Prevent unbounded recursion in GUE error handler also with UDP-Lite
In commit
11789039da53 ("fou: Prevent unbounded recursion in GUE error
handler"), I didn't take care of the case where UDP-Lite is encapsulated
into UDP or UDP-Lite with GUE. From a syzbot report about a possibly
similar issue with GUE on IPv6, I just realised the same thing might
happen with a UDP-Lite inner payload.
Also skip exception handling for inner UDP-Lite protocol.
Fixes: 11789039da53 ("fou: Prevent unbounded recursion in GUE error handler")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yi-Hung Wei [Thu, 3 Jan 2019 17:51:57 +0000 (09:51 -0800)]
openvswitch: Fix IPv6 later frags parsing
The previous commit
fa642f08839b
("openvswitch: Derive IP protocol number for IPv6 later frags")
introduces IP protocol number parsing for IPv6 later frags that can mess
up the network header length calculation logic, i.e. nh_len < 0.
However, the network header length calculation is mainly for deriving
the transport layer header in the key extraction process which the later
fragment does not apply.
Therefore, this commit skips the network header length calculation to
fix the issue.
Reported-by: Chris Mi <chrism@mellanox.com>
Reported-by: Greg Rose <gvrose8192@gmail.com>
Fixes: fa642f08839b ("openvswitch: Derive IP protocol number for IPv6 later frags")
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Thu, 3 Jan 2019 14:59:35 +0000 (14:59 +0000)]
net: macb: remove unnecessary code
Commit
653e92a9175e ("net: macb: add support for padding and fcs
computation") introduced a bug fixed by commit
899ecaedd155 ("net:
ethernet: cadence: fix socket buffer corruption problem"). Code removed
in this patch is not reachable at all so remove it.
Fixes: 653e92a9175e ("net: macb: add support for padding and fcs computation")
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Walleij [Thu, 3 Jan 2019 12:36:43 +0000 (13:36 +0100)]
net: dsa: microchip: Drop unused GPIO includes
This driver does not use the old GPIO includes so drop
them.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 4 Jan 2019 20:57:31 +0000 (12:57 -0800)]
Merge branch 'qed-fixes'
Denis Bolotin says:
====================
qed: Misc fixes in qed
This patch series fixes 2 potential bugs in qed.
Please consider applying to net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Bolotin [Thu, 3 Jan 2019 10:02:40 +0000 (12:02 +0200)]
qed: Fix qed_ll2_post_rx_buffer_notify_fw() by adding a write memory barrier
Make sure chain element is updated before ringing the doorbell.
Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Bolotin [Thu, 3 Jan 2019 10:02:39 +0000 (12:02 +0200)]
qed: Fix qed_chain_set_prod() for PBL chains with non power of 2 page count
In PBL chains with non power of 2 page count, the producer is not at the
beginning of the chain when index is 0 after a wrap. Therefore, after the
producer index wrap around, page index should be calculated more carefully.
Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Rientjes [Wed, 2 Jan 2019 21:01:43 +0000 (13:01 -0800)]
net, skbuff: do not prefer skb allocation fails early
Commit
dcda9b04713c ("mm, tree wide: replace __GFP_REPEAT by
__GFP_RETRY_MAYFAIL with more useful semantic") replaced __GFP_REPEAT in
alloc_skb_with_frags() with __GFP_RETRY_MAYFAIL when the allocation may
directly reclaim.
The previous behavior would require reclaim up to 1 << order pages for
skb aligned header_len of order > PAGE_ALLOC_COSTLY_ORDER before failing,
otherwise the allocations in alloc_skb() would loop in the page allocator
looking for memory. __GFP_RETRY_MAYFAIL makes both allocations failable
under memory pressure, including for the HEAD allocation.
This can cause, among many other things, write() to fail with ENOTCONN
during RPC when under memory pressure.
These allocations should succeed as they did previous to
dcda9b04713c
even if it requires calling the oom killer and additional looping in the
page allocator to find memory. There is no way to specify the previous
behavior of __GFP_REPEAT, but it's unlikely to be necessary since the
previous behavior only guaranteed that 1 << order pages would be reclaimed
before failing for order > PAGE_ALLOC_COSTLY_ORDER. That reclaim is not
guaranteed to be contiguous memory, so repeating for such large orders is
usually not beneficial.
Removing the setting of __GFP_RETRY_MAYFAIL to restore the previous
behavior, specifically not allowing alloc_skb() to fail for small orders
and oom kill if necessary rather than allowing RPCs to fail.
Fixes: dcda9b04713c ("mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic")
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wen Yang [Wed, 2 Jan 2019 17:09:53 +0000 (01:09 +0800)]
soc/fsl/qe: fix err handling of ucc_of_parse_tdm
Currently there are some issues with the ucc_of_parse_tdm function:
1, a possible null pointer dereference in ucc_of_parse_tdm,
detected by the semantic patch deref_null.cocci,
with the following warning:
drivers/soc/fsl/qe/qe_tdm.c:177:21-24: ERROR: pdev is NULL but dereferenced.
2, dev gets modified, so in any case that devm_iounmap() will fail
even when the new pdev is valid, because the iomap was done with a
different pdev.
3, there is no driver bind with the "fsl,t1040-qe-si" or
"fsl,t1040-qe-siram" device. So allocating resources using devm_*()
with these devices won't provide a cleanup path for these resources
when the caller fails.
This patch fixes them.
Suggested-by: Li Yang <leoyang.li@nxp.com>
Suggested-by: Christophe LEROY <christophe.leroy@c-s.fr>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Peng Hao <peng.hao2@zte.com.cn>
CC: Julia Lawall <julia.lawall@lip6.fr>
CC: Zhao Qiang <qiang.zhao@nxp.com>
CC: David S. Miller <davem@davemloft.net>
CC: netdev@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Kai-Heng Feng [Wed, 2 Jan 2019 06:45:07 +0000 (14:45 +0800)]
r8169: Add support for new Realtek Ethernet
There are two new Realtek Ethernet devices which are re-branded r8168h.
Add the IDs to to support them.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Gautier [Mon, 31 Dec 2018 02:10:58 +0000 (02:10 +0000)]
netlink: fixup regression in RTM_GETADDR
This commit fixes a regression in AF_INET/RTM_GETADDR and
AF_INET6/RTM_GETADDR.
Before this commit, the kernel would stop dumping addresses once the first
skb was full and end the stream with NLMSG_DONE(-EMSGSIZE). The error
shouldn't be sent back to netlink_dump so the callback is kept alive. The
userspace is expected to call back with a new empty skb.
Changes from V1:
- The error is not handled in netlink_dump anymore but rather in
inet_dump_ifaddr and inet6_dump_addr directly as suggested by
David Ahern.
Fixes: d7e38611b81e ("net/ipv4: Put target net when address dump fails due to bad attributes")
Fixes: 242afaa6968c ("net/ipv6: Put target net when address dump fails due to bad attributes")
Cc: David Ahern <dsahern@gmail.com>
Cc: "David S . Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Arthur Gautier <baloo@gandi.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe JAILLET [Sat, 29 Dec 2018 16:42:22 +0000 (17:42 +0100)]
octeontx2-af: Fix a resource leak in an error handling path in 'cgx_probe()'
If an error occurs after the call to 'pci_alloc_irq_vectors()', we must
call 'pci_free_irq_vectors()' in order to avoid a resource leak.
The same sequence is already in place in the corresponding 'cgx_remove()'
function.
Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 4 Jan 2019 02:57:57 +0000 (18:57 -0800)]
Remove 'type' argument from access_ok() function
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 3 Jan 2019 22:33:46 +0000 (14:33 -0800)]
Merge tag 'locks-v4.21-2' of git://git./linux/kernel/git/jlayton/linux
Pull file locking bugfix from Jeff Layton:
"This is a one-line fix for a bug that syzbot turned up in the new
patches to mitigate the thundering herd when a lock is released"
* tag 'locks-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
locks: fix error in locks_move_blocks()
Linus Torvalds [Thu, 3 Jan 2019 21:08:00 +0000 (13:08 -0800)]
Merge tag 'sound-fix-4.21-rc1' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Among a few HD-audio fixes, the only significant one is the regression
fix on some machines like Dell XPS due to the default binding changes.
We ended up reverting the whole since the fix for ASoC HD-audio driver
won't be available immediately"
* tag 'sound-fix-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Revert DSP detection on legacy HD-audio driver
ALSA: hda/tegra: clear pending irq handlers
ALSA: hda/realtek: Enable the headset mic auto detection for ASUS laptops
Linus Torvalds [Thu, 3 Jan 2019 20:53:47 +0000 (12:53 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"Several fixes here. Basically split down the line between newly
introduced regressions and long existing problems:
1) Double free in tipc_enable_bearer(), from Cong Wang.
2) Many fixes to nf_conncount, from Florian Westphal.
3) op->get_regs_len() can throw an error, check it, from Yunsheng
Lin.
4) Need to use GFP_ATOMIC in *_add_hash_mac_address() of fsl/fman
driver, from Scott Wood.
5) Inifnite loop in fib_empty_table(), from Yue Haibing.
6) Use after free in ax25_fillin_cb(), from Cong Wang.
7) Fix socket locking in nr_find_socket(), also from Cong Wang.
8) Fix WoL wakeup enable in r8169, from Heiner Kallweit.
9) On 32-bit sock->sk_stamp is not thread-safe, from Deepa Dinamani.
10) Fix ptr_ring wrap during queue swap, from Cong Wang.
11) Missing shutdown callback in hinic driver, from Xue Chaojing.
12) Need to return NULL on error from ip6_neigh_lookup(), from Stefano
Brivio.
13) BPF out of bounds speculation fixes from Daniel Borkmann"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits)
ipv6: Consider sk_bound_dev_if when binding a socket to an address
ipv6: Fix dump of specific table with strict checking
bpf: add various test cases to selftests
bpf: prevent out of bounds speculation on pointer arithmetic
bpf: fix check_map_access smin_value test when pointer contains offset
bpf: restrict unknown scalars of mixed signed bounds for unprivileged
bpf: restrict stack pointer arithmetic for unprivileged
bpf: restrict map value pointer arithmetic for unprivileged
bpf: enable access to ax register also from verifier rewrite
bpf: move tmp variable into ax register in interpreter
bpf: move {prev_,}insn_idx into verifier env
isdn: fix kernel-infoleak in capi_unlocked_ioctl
ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error
net/hamradio/6pack: use mod_timer() to rearm timers
net-next/hinic:add shutdown callback
net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT
ip: validate header length on virtual device xmit
tap: call skb_probe_transport_header after setting skb->dev
ptr_ring: wrap back ->producer in __ptr_ring_swap_queue()
net: rds: remove unnecessary NULL check
...
David Ahern [Thu, 3 Jan 2019 02:57:09 +0000 (18:57 -0800)]
ipv6: Consider sk_bound_dev_if when binding a socket to an address
IPv6 does not consider if the socket is bound to a device when binding
to an address. The result is that a socket can be bound to eth0 and then
bound to the address of eth1. If the device is a VRF, the result is that
a socket can only be bound to an address in the default VRF.
Resolve by considering the device if sk_bound_dev_if is set.
This problem exists from the beginning of git history.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 3 Jan 2019 02:26:13 +0000 (18:26 -0800)]
ipv6: Fix dump of specific table with strict checking
Dump of a specific table with strict checking enabled is looping. The
problem is that the end of the table dump is not marked in the cb. When
dumping a specific table, cb args 0 and 1 are not used (they are the hash
index and entry with an hash table index when dumping all tables). Re-use
args[0] to hold a 'done' flag for the specific table dump.
Fixes: 13e38901d46ca ("net/ipv6: Plumb support for filtering route dumps")
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 3 Jan 2019 02:56:59 +0000 (18:56 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"A tiny pull request this merge window unfortunately, should get more
material in for the next release:
- new driver for Raspberry Pi's touchscreen (firmware interface)
- miscellaneous input driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G
Input: atmel_mxt_ts - don't try to free unallocated kernel memory
Input: drv2667 - fix indentation issues
Input: touchscreen - fix coding style issue
Input: add official Raspberry Pi's touchscreen driver
Input: nomadik-ske-keypad - fix a loop timeout test
Input: rotary-encoder - don't log EPROBE_DEFER to kernel log
Input: olpc_apsp - remove set but not used variable 'np'
Input: olpc_apsp - enable the SP clock
Input: olpc_apsp - check FIFO status on open(), not probe()
Input: olpc_apsp - drop CONFIG_OLPC dependency
clk: mmp2: add SP clock
dt-bindings: marvell,mmp2: Add clock id for the SP clock
Input: ad7879 - drop platform data support
Linus Torvalds [Thu, 3 Jan 2019 02:54:45 +0000 (18:54 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio/vhost updates from Michael Tsirkin:
"Features, fixes, cleanups:
- discard in virtio blk
- misc fixes and cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: correct the related warning message
vhost: split structs into a separate header file
virtio: remove deprecated VIRTIO_PCI_CONFIG()
vhost/vsock: switch to a mutex for vhost_vsock_hash
virtio_blk: add discard and write zeroes support
Linus Torvalds [Thu, 3 Jan 2019 02:49:58 +0000 (18:49 -0800)]
Merge tag 'for-4.21/block-
20190102' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
- Dead code removal for loop/sunvdc (Chengguang)
- Mark BIDI support for bsg as deprecated, logging a single dmesg
warning if anyone is actually using it (Christoph)
- blkcg cleanup, killing a dead function and making the tryget_closest
variant easier to read (Dennis)
- Floppy fixes, one fixing a regression in swim3 (Finn)
- lightnvm use-after-free fix (Gustavo)
- gdrom leak fix (Wenwen)
- a set of drbd updates (Lars, Luc, Nathan, Roland)
* tag 'for-4.21/block-
20190102' of git://git.kernel.dk/linux-block: (28 commits)
block/swim3: Fix regression on PowerBook G3
block/swim3: Fix -EBUSY error when re-opening device after unmount
block/swim3: Remove dead return statement
block/amiflop: Don't log error message on invalid ioctl
gdrom: fix a memory leak bug
lightnvm: pblk: fix use-after-free bug
block: sunvdc: remove redundant code
block: loop: remove redundant code
bsg: deprecate BIDI support in bsg
blkcg: remove unused __blkg_release_rcu()
blkcg: clean up blkg_tryget_closest()
drbd: Change drbd_request_detach_interruptible's return type to int
drbd: Avoid Clang warning about pointless switch statment
drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")
drbd: skip spurious timeout (ping-timeo) when failing promote
drbd: don't retry connection if peers do not agree on "authentication" settings
drbd: fix print_st_err()'s prototype to match the definition
drbd: avoid spurious self-outdating with concurrent disconnect / down
drbd: do not block when adjusting "disk-options" while IO is frozen
drbd: fix comment typos
...
Linus Torvalds [Thu, 3 Jan 2019 02:47:56 +0000 (18:47 -0800)]
Merge tag 'for-4.21/libata-
20190102' of git://git.kernel.dk/linux-block
Pull libata fix from Jens Axboe:
"This libata change missed the original libata pull request.
Just a single fix in here, fixing a missed reference drop"
* tag 'for-4.21/libata-
20190102' of git://git.kernel.dk/linux-block:
ata: pata_macio: add of_node_put()
Linus Torvalds [Thu, 3 Jan 2019 02:45:50 +0000 (18:45 -0800)]
Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"One more patch to generalize a set of DT binding defines now before
-rc1 comes out.
This way the SoC DTS files can use the proper defines from a stable
tag"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: imx8qxp: make the name of clock ID generic
Linus Torvalds [Thu, 3 Jan 2019 02:43:57 +0000 (18:43 -0800)]
Merge tag 'devprop-4.21-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm
Pull device properties framework fixes from Rafael Wysocki:
"Fix two potential NULL pointer dereferences found by Coverity in the
software nodes code introduced recently (Colin Ian King)"
* tag 'devprop-4.21-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
drivers: base: swnode: check if swnode is NULL before dereferencing it
drivers: base: swnode: check if pointer p is NULL before dereferencing it
Linus Torvalds [Thu, 3 Jan 2019 02:41:38 +0000 (18:41 -0800)]
Merge tag 'mailbox-v4.21' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- Introduce device-managed registration
devm_mbox_controller_un/register and convert drivers to use it
- Introduce flush api to support clients that must busy-wait in atomic
context
- Support multiple controllers per device
- Hi3660: a bugfix and constify ops structure
- TI-MsgMgr: off by one bugfix.
- BCM: switch to spdx license
- Tegra-HSP: support for shared mailboxes and suspend/resume.
* tag 'mailbox-v4.21' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (30 commits)
mailbox: tegra-hsp: Use device-managed registration API
mailbox: tegra-hsp: use devm_kstrdup_const()
mailbox: tegra-hsp: Add suspend/resume support
mailbox: tegra-hsp: Add support for shared mailboxes
dt-bindings: tegra186-hsp: Add shared mailboxes
mailbox: Allow multiple controllers per device
mailbox: Support blocking transfers in atomic context
mailbox: ti-msgmgr: Use device-managed registration API
mailbox: stm32-ipcc: Use device-managed registration API
mailbox: rockchip: Use device-managed registration API
mailbox: qcom-apcs: Use device-managed registration API
mailbox: platform-mhu: Use device-managed registration API
mailbox: omap: Use device-managed registration API
mailbox: mtk-cmdq: Remove needless devm_kfree() calls
mailbox: mtk-cmdq: Use device-managed registration API
mailbox: xgene-slimpro: Use device-managed registration API
mailbox: sti: Use device-managed registration API
mailbox: altera: Use device-managed registration API
mailbox: imx: Use device-managed registration API
mailbox: hi6220: Use device-managed registration API
...
projects / openwrt / staging / blogic.git / log