airoha: drop kernel 6.1 support

Now that 6.6 is the default, lets remove 6.1.

Link: https://github.com/openwrt/openwrt/pull/15630
Signed-off-by: Robert Marko <robimarko@gmail.com>

airoha: default to kernel 6.6

Move airoha do kernel 6.6 as the default.

Link: https://github.com/openwrt/openwrt/pull/15630
Signed-off-by: Robert Marko <robimarko@gmail.com>

ramips: simplify multi-phy support patches

For MT7620, we should always prevent main ethernet interface from
going down due to phy link changes. And the ralink net driver does
not support cable test function, so this patch won't change any
behavior.

Ref:
6fcba5eec3bb ("ramips: port 0034-NET-multi-phy-support.patch to 5.4")

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/15591
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>

kernel: modules: Break out a submenu for RTCs

There are too many RTC drivers in other.mk, they deserve their
own menu and .mk-file, so let's break them out to a separate
entity.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

bcm47xx: 6.6: refresh patches

CI tells us that we need to, so lets refresh them.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/15010
Signed-off-by: Robert Marko <robimarko@gmail.com>

bcm47xx: 6.6: set testing kernel

Select 6.6 as testing kernel on bcm47xx.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/15010
Signed-off-by: Robert Marko <robimarko@gmail.com>

bcm47xx: remove 5.15 support

Since 6.1 is now default, drop 5.15 support.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/15010
Signed-off-by: Robert Marko <robimarko@gmail.com>

bcm47xx: default to kernel 6.1

Default to kernel 6.1 on bcm47xx.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/15010
Signed-off-by: Robert Marko <robimarko@gmail.com>

bcm47xx: 6.6: refresh patches

Refresh kernel patches. Remove patches already included in the kernel.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/15010
Signed-off-by: Robert Marko <robimarko@gmail.com>

bcm47xx: 6.6: refresh kernel config

Refresh kernel config.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/15010
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel/bcm47xx: Restore kernel files for v6.1

This is an automatically generated commit which aids following Kernel patch history,
as git will see the move and copy as a rename thus defeating the purpose.

See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
for the original discussion.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/15010
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel/bcm47xx: Create kernel files for v6.6 (from v6.1)

This is an automatically generated commit.

When doing `git bisect`, consider `git bisect --skip`.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/15010
Signed-off-by: Robert Marko <robimarko@gmail.com>

qualcommax: use ath11k_patch_mac for ZBT-Z800AX

Use ath11k_patch_mac and ath11k_set_macflag functions
instead of fix_wifi_mac script.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/15580
Signed-off-by: Robert Marko <robimarko@gmail.com>

mpc85xx: refresh patches

Signed-off-by: David Bauer <mail@david-bauer.net>

mpc85xx: fix patch for kernel 6.6

Fixes: af329ec38980 ("mpc85xx: add support for Hewlett Packard MSM460")
Signed-off-by: David Bauer <mail@david-bauer.net>

package/utils/secilc: drop PKG_CPE_ID

cpe:/a:selinuxproject:secilc is not a correct CPE ID for secilc:
https://nvd.nist.gov/products/cpe/search/results?keyword=cpe:2.3:a:selinuxproject:secilc

Fixes: 9ee7c1ec60e23f25f5d275c6439ce93aec914e1c (secilc: adds new package)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15298
Signed-off-by: Robert Marko <robimarko@gmail.com>

ramips: add support for D-Link DIR-2055 A1

Add support for D-Link DIR-2055 A1 based on similarities to DIR-1960 A1,
as well as various DIR-8xx A1 models. Existing DIR-1960 A1 openwrt
"factory" firmware installs without modifications via the D-Link Recovery
GUI and has no known incompatibilities with the DIR-2055 A1.

Changes to be committed:
new file:   target/linux/ramips/dts/mt7621_dlink_dir-2055-a1.dts
modified:   target/linux/ramips/image/mt7621.mk
modified:   target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
modified:   target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh

Specifications:

    Board: Not known
    SoC: MediaTek MT7621 Family (MT7621AT)
    RAM: 256 MB (Micron 9OK17 D9PTK, should be DDR3 MT41K128M16JT-125)
    Flash: 128 MB (Winbond W29N01HVSINA)
    WiFi: MediaTek MT7615 Family (MT7615N x2)
    Switch: 1 WAN, 4 LAN (Gigabit)
    Ports: 1 USB 3.0 (front)
    Buttons: Reset, WiFi Toggle, WPS
    LEDs: Power (white/orange), Internet (white/orange),
          WiFi 2.4G (white), WiFi 5G (white)

Notes:

    Only known difference vs. the DIR-1960 A1 is that the DIR-2055 A1
    doesn't have a USB activity LED

Serial port:

    Tested to be identical to various DIR-8xx A1 models with a similar
    enclosure/pcb design:
        Parameters: 57600, 8N1, 3.3V TTL no flow control
        Location: J1 header (close to the Reset, WiFi and WPS buttons)
        Pinout: 1 - VCC 2 - RXD 3 - TXD 4 - GND
            Did not connect VCC when using

Installation:

    D-Link Recovery GUI: power down the router, press and hold the reset
    button, then re-plug it. Keep the reset button pressed until the power
    LED starts flashing orange, manually assign a static IP address under
    the 192.168.0.xxx subnet (e.g. 192.168.0.2) and go to
    http://192.168.0.1

    Some modern browsers may have problems flashing via the Recovery GUI,
    if that occurs consider uploading the firmware through cURL:

    curl -v -i -F "firmware=@file.bin" 192.168.0.1

Signed-off-by: Keith Harrison <keithh@protonmail.com>

uboot-tegra: Set UBOOT_USE_INTREE_DTC

U-Boot 2024.04 for tegra needs swig installed on the host, this
dependency is only checked if UBOOT_USE_INTREE_DTC is set. add the
missing definition.

Fixes: 6832faf3407e ("uboot-tegra: bump version to 2024.04")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

tegra: Activate CONFIG_SND_DRIVERS

The option CONFIG_SND_DRIVERS is activated by default in the generic
configuration, do not deactivate it for tegra. This fixes the build of
the kmod-sound-dummy package on tegra.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: Split kmod-video-dma into two kmods

Split the kmod-video-dma into kmod-video-dma-sg and
kmod-video-dma-contig. The old one contained two kmods, but sometimes
only one of them is build which caused problems. The configuration
options are not manually selectable in the kernel and hidden in OpenWrt.

Currently this causes build failures on some targets.

Fixes: 4d7cbe0a5590 ("kernel: video-dma: explicitly state packaged modules")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

mvebu: disable polling delay for passive trip point for puzzle thermal

We don't have any passive trip point hence we can set the polling delay
for passive trip to 0 effectively disabling this polling.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

mvebu: split thermal zone for puzzle chassis

Split thermal zone for puzzle chassis. Thermal platform supports only
one sensor per thermal zone.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mvebu: fix missing property in puzzle thermal

Fix missing property in puzzle thermal. The thing was never supposed to
work.

Property #thermal-sensor-cells was missing from the puzzle hwmon, making
the entire thermal platform referencing that fail to probe with -EINVAL.

The puzzle hwmon expose 2 termistor but they probably use an userspace
downstream utility to configure and handle thermal. For this reason we
really don't know what they use the sensor for or when it's attached.

We use them to sensor if the Chassis gets too hot due to ambient
temperature and generic components getting too warm.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

mvebu: improve thermal management of IEI Puzzle devices

 - Make step_wise thermal governor respect hysteresis
   This is done by importing a downstream patch, backporting the same feature
   now present in Linux v6.10+ would be too messy.
 - Introduce thermal zone for the WT61P803 uC (chassis and board sensors)
 - Introduce thermal zones for AQR NBase-T PHYs
 - No longer modify existing SoC thermal zones (which are now only in charge
   for emergency shutdown, and can be interrupt driven instead of polled)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

mpc85xx: add label-mac for HP MSM460

Signed-off-by: David Bauer <mail@david-bauer.net>

mpc85xx: add support for Hewlett Packard MSM460

Hardware
--------
CPU:  Freescale P1020 2xe500 PPC
RAM:  256M DDR3 (Micron MT41J64M16JT-15E:G "D9MNJ")
NAND: 128M (Micron 2CA1)
BTN:  1x Reset
LED:  Power - ETH - Radio1 - Radio2
UART: RJ-45 Cisco Pinout - 115200 8N1

Installation
------------
NOTE: You can find a repo with up-to-date instructions as well as
the required files here:

https://github.com/blocktrron/msm460-flashing

Required files
==============
You need a command-files as well as a U-Boot image.

The command-file has the following content (padded to 131072 bytes).

If you copy paste these, remove the newlines!

```
U-BOOT setenv ethaddr 02:03:04:05:06:07; setenv ipaddr 192.168.1.1;
setenv serverip 192.168.1.66; tftpboot 0x3000000 msm460-uboot.bin;
nand device; nand erase 0 0xC0000; nand write 0x3000000 0x0 0xC0000; reset
```

You can download the required U-Boot from this repository:

https://github.com/blocktrron/u-boot-msm/releases

Preparation
===========
Prepare a TFTP server serving two files:

 - U-Boot NAND image as `msm460-uboot.bin`.
 - OpenWrt factory image as `msm460-factory.bin`
 - Command-file names `commands.tftp`

You can start a TFTP server in the current directory using dnsmasq:

```bash
sudo dnsmasq --no-daemon --listen-address=0.0.0.0 \
    --port=0 --enable-tftp=enxd0 --tftp-root="$(pwd)" \
    --user=root --group=root
```
Replace `enxd0` with the name of your network interface.

Procedure
=========
1. Assign yourself the IP-Address 192.168.1.66/24.
3. Connect the Router to the PC while keeping the reset button
   pressed.
4. The LEDs will eventually begin to flash.
   They will start to flash faster after around 15 seconds.
5. Release the reset button.
6. Start a new shell
7. Make sure you are currently in the directory where the tftp server
   is located.
8. Run the following command:

```bash
tftp 192.168.1.1 -m binary -c put commands.tftp nflashd.cccc9999
```

You get the message "Transfer timed out."
To find out if you have been successful, please check the
blinking LED Pattern.

Signed-off-by: David Bauer <mail@david-bauer.net>

mpc85xx: add compressed zImage for mpc85xx

Add a universal zImage which can be loaded by mpc85xx boards at
load address 0x3000000. This allows boards to boot kernels larger than
16MB even if the image is loaded temporarily from NAND at offset
0x1000000 which some bootloaders do by default.

Signed-off-by: David Bauer <mail@david-bauer.net>

kirkwood: add D-Link DNS-320L support

Dual-slot NAS based on Marvell Kirkwood.

Specifications:
 - Marvell 88F6702 @1GHz
 - 256Mb RAM
 - 128Mb NAND
 - 1x GbE LAN (Marvell 88E1318R)
 - 1x USB 2.0
 - 2x SATA
 - Weltrend WT69P3 ("supervisor" MCU chip)
 - Serial on J2 (115200,8n1)
 - Newer bootROM so kwboot-ing via serial is possible

Notes:
 - The Weltrend MCU is controlled by the package added in utils/dns320l-mcu.
 - The original MAC address is stored in the "mini firmware" image's first
   17 bytes.
 - Compared to the original MTD layout, the uImage+rootfs are now stored in
   a common ubi partition.

Installation:
1. Serial console
 - Connect your levelshifter to the serial console
   on J2 (refer to the wiki page for pinout)
2. Update u-boot
 - Download the u-boot.kwb image for the device
 - Powercycle the NAS
 - Run "kwboot -b u-boot-dns320l/u-boot.kwb /dev/ttyUSB0 -p"
 - Connect to the serial console with minicom
 - tftp 0x0800000 u-boot-dns320l/u-boot.kwb
   (Please note that "PHY reset timed out" seems to be customary
    on kirkwood devices, the egiga0 interface works regardless.)
 - nand erase 0x0 100000
 - nand write 0x0800000 0x0 0x100000
 - reset
3. Install OpenWrt
 - Boot up the initramfs image
 - tftpboot 0x800000 openwrt-kirkwood-generic-dlink_dns320l-initramfs-uImage; bootm 0x800000
 - Download the sysupgrade image and perform sysupgrade

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com>

build: add option KERNEL_DEBUG_INFO_BTF_MODULES

The recent kernel v6.6.31 update broke BTF-enabled builds since upstream
Linux added a prompt for config option DEBUG_INFO_BTF_MODULES in commit
2166cb2e21 ("bpf, kconfig: Fix DEBUG_INFO_BTF_MODULES Kconfig definition").

Fix by updating Config-kernel.in to add the option, cleaning up a related
dependency and whitespace also.

Fixes: 10d77b9bc3 ("kernel: bump 6.6 to 6.6.31")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>

tools/elfutils: pass -O2 in HOST_CXXFLAGS

Trying to compile elfutils on Fedora 40 with GCC 14.1.1 will fail with:
/home/robimarko/Building/AX3600/qualcommax/staging_dir/host/bin/g++ -std=c++11 -D_GNU_SOURCE -DHAVE_CONFIG_H -DLOCALEDIR='"/home/robimarko/Building/AX3600/qualcommax/staging_dir/host/share/locale"'  -DDEBUGPRED=0 -DSRCDIR=\"/home/robimarko/Building/AX3600/qualcommax/build_dir/host/elfutils-0.191/src\" -DOBJDIR=\"/home/robimarko/Building/AX3600/qualcommax/build_dir/host/elfutils-0.191/src\" -I. -I..  -I../libgnu -I../libgnu -I. -I. -I../lib -I.. -I./../libelf -I./../libebl -I./../libdw -I./../libdwelf -I./../libdwfl -I./../libasm -I../debuginfod -I/home/robimarko/Building/AX3600/qualcommax/staging_dir/host/include  -std=c++11 -Wall -Wshadow -Wtrampolines -Wlogical-op -Wduplicated-cond -Wnull-dereference -Wimplicit-fallthrough=5 -Werror -Wunused -Wextra -Wstack-usage=262144   -D_FORTIFY_SOURCE=3  -c -o srcfiles.o srcfiles.cxx
In file included from /usr/include/c++/14/x86_64-redhat-linux/bits/os_defines.h:39,
                 from /usr/include/c++/14/x86_64-redhat-linux/bits/c++config.h:2521,
                 from /usr/include/c++/14/cstdlib:41,
                 from ../libgnu/gettext.h:56,
                 from ../libgnu/eu-config.h:62,
                 from ../config.h:2378,
                 from srcfiles.cxx:31:
/usr/include/features.h:414:4: error: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp]
  414 | #  warning _FORTIFY_SOURCE requires compiling with optimization (-O)
      |    ^~~~~~~
cc1plus: all warnings being treated as errors

So, lets do as the error says and pass -O2 in HOST_CXXFLAGS like we already
do by default in HOST_CFLAGS.

Link: https://github.com/openwrt/openwrt/pull/15368
Signed-off-by: Robert Marko <robimarko@gmail.com>

tools/elfutils: do not directly link gnulib to libelf

The compiled library resulting from importing gnulib has been
linked to libelf in order to easily cover other link dependencies.
However, this is not appropriate for linking libelf to other programs
as it bloats the resulting libelf library, and may result in
multiple defintions of symbols based on whether or not
certain modules from gnulib are included while elfutils
already has it's own definition of a function.

This is not a problem while building elfutils, because gnulib has
it's own way of creating function aliases and special declarations
that allow the linker to ignore the original function definitions,
however, when libelf is used to link to something else,
this results in an error at link time.

The gnulib manual recommended linking the libraries directly,
but those who have written it may not have considered how this
can affect the ability to link that library in other builds,
they likely assume the build targets would not be a dependency.

Fix this by removing the linking between gnulib and libelf
and instead overriding Make variables in order to add linking
between gnulib and each of the binaries provided by elfutils,
using Make functions to avoid applying it to other subdirectories.

The function tdestroy() would still be missing on macOS,
but the existence of the gnulib tsearch object having been built
is an indicator of whether or not it is needed
because it is only built conditionally by gnulib,
so include linking that object only when it exists.

Block the unnecessary replacement of some functions by gnulib
so that future linking with libelf doesn't require
the associated gnulib "rpl" prefixed functions.
These replacements are very strict in order to correct
minor bugs that don't have a real impact in almost all cases
or new standards requirements that are not yet in effect or used.

Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15368
Signed-off-by: Robert Marko <robimarko@gmail.com>

tools/elfutils: install a subset of the elfutils binaries

Install binaries that are not common with binutils
instead of none at all. This adds a negligible time to the build.

Building shared libraries is disabled, so the AM_LDFLAGS can be reset
without the rpath-link option which is unrecognized by clang.

Some of the binaries depend on functions that are defined
using a "strong alias" instead of a normal definition,
but this is disabled by our patches in order to work on macOS,
so use the identical function directly instead.

Add fnmatch from gnulib with GNU extensions
which is needed for usage of the FNM_EXTMATCH flag.

Handle a "Wunused-const-variable" error with the same
preprocessor conditional used to include the function
that the variable is used in.

Ref: f64bd4b6c ("tools/elfutils: only build required components")
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15368
Signed-off-by: Robert Marko <robimarko@gmail.com>

tools/gnulib: unmangle fts header on macOS

The gnulib fts header is meant to not be overwritten
in any way by the host system's copy of fts.h
and was therefore given a unique name instead.

This is fine if the built libgnu library is directly linked
with the target library, but if we want to keep them isolated
we end up having the definitions being mangled anyway
when the next object to link against included the fts.h header.

On some macOS platforms, the use of __DARWIN_INODE64
is messing with the link name for fts functions, resulting in:

Undefined symbols for architecture x86_64:
  "_rpl_fts_close$INODE64", referenced from:
...

Create a local fts header for gnulib
that completely blocks the macOS host fts header.

An alternative and more upstream friendly fix would be
to rename fts_.h to fts.h and add the macOS-only
include guard to that file within it's own include guard,
but that would be a massive patch, so do this for now.

Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15368
Signed-off-by: Robert Marko <robimarko@gmail.com>

imagebuilder: fix broken IB_STANDALONE option

Fix broken IB_STANDALONE option for OPKG due to an error in ifdef logic
where we weren't adding the required entry to reference the local files
in repositories.conf

Rework the ifdef to more explicit and restore original functionality of
this option.

While at it also provide different README for APK or OPKG.

Fixes: d788ab376f85 ("build: add APK package build capabilities")
Link: https://github.com/openwrt/openwrt/pull/15599
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

tegra: enable VDE driver

Upstream commit 83b7f0b8aeab ("ARM: tegra: Add OPP tables and power
domains to Tegra20 device-trees") added power domains to all devices
supporting power management and one of them is Video Decoder Engine.
Because of lacking driver for VDE, its power gate couldn't be driven
which inhibited reboot of the whole device.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>

tegra: add testing 6.6 kernel

Preliminary support.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>

tegra: 6.6: refresh config and patches

Simple refresh to get rid of any fuzz and drop serial patch. With few
bug fixes around tegra serial driver the spurious IRQ didn't appear any
more during test. Let's see how long that'll last.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>

kernel/tegra: Restore kernel files for v5.15

This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.

For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>

kernel/tegra: Create kernel files for v6.6 (from v5.15)

This is an automatically generated commit.

When doing `git bisect`, consider `git bisect --skip`.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>

tegra: refresh 5.15 config

Reduce diffstat in kernel config on new version introduction.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>

kernel: video-dma: explicitly state packaged modules

Because wildcard in variable stating packaged modules, the filtering for
built-in kernel modules didn't work and would cause a packaging failure.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>

ramips: get rid of downstream network device label patch

Use a simple Shell script like on filogic target to get rid of downstream
patch for the Ethernet driver which was rejected upstream long ago.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: filogic: avoid sub-shell invovation in netdev rename loop

Rename network devices to their label set in DT without invocation of
a sub-shell.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

ply: add dynamic tracing package using BPF

ply is a light-weight dynamic tracer for Linux that leverages the kernel's
BPF VM in concert with kprobes/tracepoints to attach probes to arbitrary
points in the kernel.

Most tracers that generate BPF bytecode are based on the LLVM-based BCC
toolchain; ply on the other hand has no external dependencies outside libc,
making it suitable for use on constrained embedded systems.

Currently ply supports x86_64, aarch64, arm, riscv64, riscv32, powerpc,
mips(el), and mips64(el) architectures.

Further documentation, examples and implementation details may be found at:
https://github.com/iovisor/ply.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>

packages: refresh patches

CI is supposed to catch all of these. Some of these predate CI.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

kernel: Add CONFIG_FB_DEVICE to kmod-fb

At least kmod-fb-tft depends on CONFIG_FB_DEVICE and can not be
activated without it.

This configuration option was added with kernel 6.6, before this featre
was always activated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

x86: Activate CONFIG_FB_DEVICE

This adds the legacy /dev/fb* device file for kernel 6.6 again.
Linux upstream commit 701d2054fa31 ("fbdev: Make support for
userspace interfaces configurable") made this configurable and we
deactivated this option by default for kernel 6.6. On x86 we are not
space constrained and some users need this legacy interface.

Fixes: #15222
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

iproute2: update to 6.9.0

Support for iptables action has been dropped. Remove tc-mod-iptables and related
patch (175-reduce-dynamic-syms.patch).

We also add the missing libbpf dependency for `ss` since iproute 8740ca9
("ss: add support for BPF socket-local storage") now means that `ss` requires
libbpf as well.

Fix 170-ip_tiny.patch, as the help text didn't match all the included functions.

Drop upstreamed patches 402-bpf-fix-warning-from-basename.patch
and 403-bpf-include-libgen.h-for-basename.patch.

All other patches automatically rebased.

Co-authored-by: Rany Hany <rany_hany@riseup.net>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Rany Hany <rany_hany@riseup.net>

iproute2: fix build on GCC 14

Upstream patches:

401-bridge-vlan.c-bridge-vlan.c-fix-build-with-gcc-14-on.patch
402-bpf-fix-warning-from-basename.patch
403-bpf-include-libgen.h-for-basename.patch

The patch (400-rdma-include-libgen.h-for-basename.patch) was not
submitted upstream but just adds a missing include for basename.

Signed-off-by: Rany Hany <rany_hany@riseup.net>

mbedtls: fix build on GCC 14

Without this patch, GCC 14 incorrectly complains about the following error:

In file included from /home/user/workspace/mbedtls/library/ctr_drbg.c:13:
In function ‘mbedtls_xor’,
    inlined from ‘ctr_drbg_update_internal’ at /home/user/workspace/mbedtls/library/ctr_drbg.c:372:5:
/home/user/workspace/mbedtls/library/common.h:235:17: error: array subscript 48 is outside array bounds of ‘unsigned char[48]’ [-Werror=array-bounds=]
  235 |         r[i] = a[i] ^ b[i];
      |                ~^~~
/home/user/workspace/mbedtls/library/ctr_drbg.c: In function ‘ctr_drbg_update_internal’:
/home/user/workspace/mbedtls/library/ctr_drbg.c:335:19: note: at offset 48 into object ‘tmp’ of size 48
  335 |     unsigned char tmp[MBEDTLS_CTR_DRBG_SEEDLEN];
      |                   ^~~
In function ‘mbedtls_xor’,
    inlined from ‘ctr_drbg_update_internal’ at /home/user/workspace/mbedtls/library/ctr_drbg.c:372:5:
/home/user/workspace/mbedtls/library/common.h:235:24: error: array subscript 48 is outside array bounds of ‘const unsigned char[48]’ [-Werror=array-bounds=]
  235 |         r[i] = a[i] ^ b[i];
      |                       ~^~~
/home/user/workspace/mbedtls/library/ctr_drbg.c: In function ‘ctr_drbg_update_internal’:
/home/user/workspace/mbedtls/library/ctr_drbg.c:333:57: note: at offset 48 into object ‘data’ of size [0, 48]
  333 |                                     const unsigned char data[MBEDTLS_CTR_DRBG_SEEDLEN])
      |                                     ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘mbedtls_xor’,
    inlined from ‘ctr_drbg_update_internal’ at /home/user/workspace/mbedtls/library/ctr_drbg.c:372:5:
/home/user/workspace/mbedtls/library/common.h:235:14: error: array subscript 48 is outside array bounds of ‘unsigned char[48]’ [-Werror=array-bounds=]
  235 |         r[i] = a[i] ^ b[i];
      |         ~~~~~^~~~~~~~~~~~~
/home/user/workspace/mbedtls/library/ctr_drbg.c: In function ‘ctr_drbg_update_internal’:
/home/user/workspace/mbedtls/library/ctr_drbg.c:335:19: note: at offset 48 into object ‘tmp’ of size 48
  335 |     unsigned char tmp[MBEDTLS_CTR_DRBG_SEEDLEN];
      |                   ^~~

This change adds a basic check to silence the warning until a solution is worked on upstream.
As this check is already used by another compiler, it shouldn't cause any issues for us.

Signed-off-by: Rany Hany <rany_hany@riseup.net>

x86: drop 6.1 support

Drop configs, files and patches for Linux 6.1.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>

x86: use kernel 6.6 by default

Switch to Linux kernel version 6.6.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>

armsr: Remove kernel 6.1 configuration

Armsr is using kernel 6.6 by default now, remove configuration for
kernel 6.1.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

armsr: Use kernel 6.6 by default

All 2 subtargets are compiling fine and booting up in qemu.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

generic: 6.6: net: sfp-bus: fix SFP mode detect from bitrate

Backport commit fixing detection of SFP modules which has been broken
since Linux 6.4 for some modules.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

generic: backport accepted and pending patches for mtk_eth_soc

Backport a bunch of fixes and improvements for WED and PPE, mostly
for MT7988.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

generic: move accepted patches for mtk_eth_soc to backport-6.6

In preparation to update to upcoming Linux 6.6.33 move accepted patches
from mediatek target to backport folder, so moving to newer Linux 6.6
releases becomes easier and also other patches on top can be applied
more easily.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

kernel: add missing patch header

Make sure all patches can again be applied using 'git am' on the
corresponding linux-stable git tree.

Fixes: a7ae4ed0a3 ("kernel: fix tools build breakage on macos with x86")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

kernel: bump 6.6 to 6.6.32

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.32

Only kernel checksum was updated/no patches needed a rebase.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>

kernel: bump 6.6 to 6.6.31

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.31

Removed upstreamed:
backport-6.6/600-v6.9-01-net-gro-parse-ipv6-ext-headers-without-frag0-invalid.patch[1]
backport-6.6/600-v6.9-02-net-gro-fix-udp-bad-offset-in-socket-lookup-by-addin.patch[2]
backport-6.6/600-v6.9-03-net-gro-add-flush-check-in-udp_gro_receive_segment.patch[3]
backport-6.6/816-v6.7-0002-nvmem-add-explicit-config-option-to-read-old-syntax-.patch[4]
pending-6.6/681-net-bridge-fix-multicast-to-unicast-with-fraglist-GS.patch[5]
pending-6.6/682-net-core-reject-skb_copy-_expand-for-fraglist-GSO-sk.patch[6]
pending-6.6/684-net-bridge-fix-corrupted-ethernet-header-on-multicas.patch[7]
pending-6.6/778-net-l2tp-drop-flow-hash-on-forward.patch[8]
pending-6.6/440-mtd-don-t-look-for-OTP-legacy-NVMEM-cells-if-proper-.patch[9a,b]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.31&id=7f7b0ebb37afc5070d122318e3651d7cb8c4f01c
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.31&id=af276a5ac8e938c8b058e3e124073cc1e322d98b
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.31&id=78b6092d78341e423e5f6afae4d9f401b561aca7
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.31&id=26e2fe4cab10e67f116f4a2eecc393824bb294b8
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.31&id=65fbc7a11d063236e1f1dcebb38eeaa3ccbe2dbc
6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.31&id=cfe34d86ef9765c388f145039006bb79b6c81ac6
7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.31&id=1ce60741d7e17dcf707e3bdebed4442ae30bdd02
8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.31&id=23e25d2fc777cd0cc77c2f857f93e9b13ee789b9
9a. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.31&id=cce311f8bbbf9d24eacc39af3228cd104e079396
9b. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/drivers/mtd/mtdcore.c?id=v6.6.31&id2=v6.6.30

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>

d1: drop 6.1 support

Now that 6.6 is the default, remove the 6.1 config and patches.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

d1: switch default to 6.6

Switch the default kernel to 6.6.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

d1: 6.6: set testing kernel

Allow selecting 6.6 as testing kernel on d1.

Runtime-tested: Nezha D1

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

d1: refresh kernel config

Refresh kernel config, and enable thermal features.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

d1: remove upstreamed patches and add new patchset

Remove patches that were upstreamed, and backport features from
later kernels.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

kernel/d1: Restore kernel files for v6.1

This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.

For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

kernel/d1: Create kernel files for v6.6 (from v6.1)

This is an automatically generated commit.

When doing `git bisect`, consider `git bisect --skip`.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

scripts: Add GNU ftp mirror redirector for GNU and Savannah

Add GNU's redirector which automatically redirect user to nearby online
mirror.

Signed-off-by: Sahil Dhiman <sahil@hopbox.in>
Link: https://github.com/openwrt/openwrt/pull/15557
Signed-off-by: Robert Marko <robimarko@gmail.com>

tools/mkimage: update to v2024.04

Update to latest version.

Refresh patches:
- 030-allow-to-use-different-magic.patch
- 095-tools-disable-TOOLS_FIT_FULL_CHECK.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>

ramips: modules: remove symbol CONFIG_DW_DMAC_PCI

The DW_DMAC_PCI symbol won't be automatically selected at all.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

ramips: gdma: remove slave_id field

Fix compile error:
drivers/dma/ralink-gdma.c: In function 'gdma_dma_config':
drivers/dma/ralink-gdma.c:197:40: error: 'struct dma_slave_config' has no member named 'slave_id'
  197 |                 chan->slave_id = config->slave_id;
      |                                        ^~
drivers/dma/ralink-gdma.c:206:40: error: 'struct dma_slave_config' has no member named 'slave_id'
  206 |                 chan->slave_id = config->slave_id;
      |                                        ^~
make[8]: *** [scripts/Makefile.build:243: drivers/dma/ralink-gdma.o] Error 1

ref: https://lore.kernel.org/all/20211122222203.4103644-1-arnd@kernel.org/

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

ramips: add back the gdma driver

The gdma driver has been removed from the upstream. Let's move it
to the local files. This patch also removed unsupported compatible
string and sub-target.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

mediatek: add missing ';;' in shell switch case block

Add missing ';;' to the end of shell switch case statement.

Fixes: c71b68acdd ("mediatek: filogic: add Adtran SmartRG Mount Stuart series")
Reported-by: @gl-dude
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

toolchain: gcc: update to 13.3

Release Notes:
https://gcc.gnu.org/pipermail/gcc/2024-May/243980.html

Remove upstreamed patches:
- patches-13.x/020-Include-safe-ctype.h-after-C-standard-headers-to-avo.patch
- patches-13.x/021-libcc1-fix-vector-include.patch
- patches-13.x/400-LoongArch-Fix-MUSL_DYNAMIC_LINKER.patch
- patches-13.x/401-LoongArch-Modify-MUSL_DYNAMIC_LINKER.patch

Refresh patches:
- patches-13.x/300-mips_Os_cpu_rtx_cost_model.patch
- patches-13.x/970-macos_arm64-building-fix.patch

Signed-off-by: Olcay Korkmaz <nuke_mania@hotmail.com>

malta: Remove kernel 6.1 configuration

Malta is using kernel 6.6 by default now, remove configuration for
kernel 6.1.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

malta: Use kernel 6.6 by default

All 4 subtargets are compiling fine and booting up in qemu.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: kmod-ipt-clusterip: Depend on kernel 5.15 and 6.1

The kernel module was removed in kernel 6.3.
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9db5d918e2c07fa09fab18bc7addf3408da0c76f

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: kmod-can-usb-esd: Fix build on kernel 6.6

The kernel module and configuration option was renamed from esd_usb2.ko
to esd_usb.ko in kernel 6.0. Adapt the kernel package.
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5e910bdedc84c1f196863cebdf27c1806449c27c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

linux-firmware: Update to version 20240513

This updates the following firmware files:
airoha-en8811h-firmware/lib/firmware/airoha/EthMD32.DSP.bin
airoha-en8811h-firmware/lib/firmware/airoha/EthMD32.dm.bin
amdgpu-firmware/ (Many files)
ibt-firmware/lib/firmware/intel/ibt-0040-0041.sfi
ibt-firmware/lib/firmware/intel/ibt-0040-1020.sfi
ibt-firmware/lib/firmware/intel/ibt-0040-1050.sfi
ibt-firmware/lib/firmware/intel/ibt-0040-2120.sfi
ibt-firmware/lib/firmware/intel/ibt-0040-4150.sfi
ibt-firmware/lib/firmware/intel/ibt-0041-0041.sfi
ibt-firmware/lib/firmware/intel/ibt-0180-0041.sfi
ibt-firmware/lib/firmware/intel/ibt-0180-1050.sfi
ibt-firmware/lib/firmware/intel/ibt-0180-4150.sfi
ibt-firmware/lib/firmware/intel/ibt-0291-0291.ddc
ibt-firmware/lib/firmware/intel/ibt-0291-0291.sfi
ibt-firmware/lib/firmware/intel/ibt-1040-0041.sfi
ibt-firmware/lib/firmware/intel/ibt-1040-1020.sfi
ibt-firmware/lib/firmware/intel/ibt-1040-1050.sfi
ibt-firmware/lib/firmware/intel/ibt-1040-2120.sfi
ibt-firmware/lib/firmware/intel/ibt-1040-4150.sfi
ibt-firmware/lib/firmware/intel/ibt-17-16-1.sfi
ibt-firmware/lib/firmware/intel/ibt-17-2.sfi
ibt-firmware/lib/firmware/intel/ibt-18-16-1.sfi
ibt-firmware/lib/firmware/intel/ibt-18-2.sfi
ibt-firmware/lib/firmware/intel/ibt-19-0-0.sfi
ibt-firmware/lib/firmware/intel/ibt-19-0-1.sfi
ibt-firmware/lib/firmware/intel/ibt-19-0-4.sfi
ibt-firmware/lib/firmware/intel/ibt-19-16-4.sfi
ibt-firmware/lib/firmware/intel/ibt-19-240-1.sfi
ibt-firmware/lib/firmware/intel/ibt-19-240-4.sfi
ibt-firmware/lib/firmware/intel/ibt-19-32-0.sfi
ibt-firmware/lib/firmware/intel/ibt-19-32-1.sfi
ibt-firmware/lib/firmware/intel/ibt-19-32-4.sfi
ibt-firmware/lib/firmware/intel/ibt-20-0-3.sfi
ibt-firmware/lib/firmware/intel/ibt-20-1-3.sfi
ibt-firmware/lib/firmware/intel/ibt-20-1-4.sfi
iwlwifi-firmware-ax200/lib/firmware/iwlwifi-cc-a0-77.ucode
iwlwifi-firmware-ax201/lib/firmware/iwlwifi-QuZ-a0-hr-b0-77.ucode
iwlwifi-firmware-ax210/lib/firmware/iwlwifi-ty-a0-gf-a0.pnvm
iwlwifi-firmware-be200/lib/firmware/iwlwifi-gl-c0-fm-c0.pnvm
iwlwifi-firmware-iwl9000/lib/firmware/iwlwifi-9000-pu-b0-jf-b0-46.ucode
iwlwifi-firmware-iwl9260/lib/firmware/iwlwifi-9260-th-b0-jf-b0-46.ucode
mt7921bt-firmware/lib/firmware/mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin
mt7922bt-firmware/lib/firmware/mediatek/BT_RAM_CODE_MT7922_1_1_hdr.bin
rtl8852ce-firmware/lib/firmware/rtw89/rtw8852c_fw.bin

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ebtables: fix compilation with GCC14

Remove 100-musl_fix.patch, which is no longer needed
and causes a build error with gcc-14.

Fixes:
useful_functions.c:63:41: error: passing argument 1 of 'ether_ntoa' from incompatible pointer type [-Wincompatible-pointer-types]
   63 |                 printf("%s", ether_ntoa((struct ether_addr *) mac));
      |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~
      |                                         |
      |                                         struct ether_addr *
In file included from include/ebtables_u.h:28,
                 from useful_functions.c:25:
/Volumes/wrt3200/openwrt/staging_dir/toolchain-arm_cortex-a9+vfpv3-d16_gcc-14.1.0_musl_eabi/include/netinet/ether.h:10:19: note: expected 'const struct ether_addr *' but argument is of type 'struct ether_addr *'
   10 | char *ether_ntoa (const struct ether_addr *);
      |                   ^~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15576
Signed-off-by: Robert Marko <robimarko@gmail.com>

lantiq: disable building of ZyXEL P-2812HNU F1

Disable image building for the board, since the kernel of the main branch
is to big to fit into the kernel partition.

Signed-off-by: Nick Hainke <vincent@systemli.org>

lantiq: switch to kernel 6.1

Let's switch the lantiq target to use kernel 6.1 by default.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>

ath79: add support for Dell SonicPoint ACe APL26-0AE

Dell/SonicWall APL26-0AE (marketed as SonicPoint ACe) is a dual band
wireless access point. End of life as of 2022-07-31.

Specification
SoC: QualcommAtheros QCA9550
RAM: 256 MB DDR2
Flash: 32 MB SPI NOR
WIFI: 2.4 GHz 3T3R integrated
      5 GHz 3T3R QCA9890 oversized Mini PCIe card
Ethernet: 2x 10/100/1000 Mbps QCA8334
          port labeled lan1 is PoE capable (802.3at)
USB: 1x 2.0
LEDs: LEDs: 6x which 5 are GPIO controlled and two of them are dual color
Buttons: 2x GPIO controlled
Serial: RJ-45 port, SonicWall pinout
        baud: 115200, parity: none, flow control: none

Before flashing, be sure to have a copy of factory firmware, in case You
wish to revert to original firmware.
All described procedures were done in following environment:
ROM Version: SonicROM (U-Boot) 8.0.0.0-11o
SafeMode Firmware Version: SonicOS 8.0.0.0-14o
Firmware Version: SonicOS 9.0.1.0
In case of other versions, following installation instructions might be
ineffective.

Installation
1. Prepare TFTP server with OpenWrt sysupgrade image and rename that
   image to "sp_fw.bin".
2. Connect to one of LAN ports.
3. Connect to serial port.
4. Hold the reset button (small through hole on side of the unit),
   power on the device and when prompted to stop autoboot, hit any key.
   The held button can now be released.
5. Alter U-Boot environment with following commands:
    setenv bootcmd bootm 0x9F110000
    saveenv
6. Adjust "ipaddr" (access point, default is 192.168.1.1) and "serverip"
   (TFTP server, default is 192.168.1.10) addresses in U-Boot
   environment, then run following commands:
    tftp 0x80060000 sp_fw.bin
    erase 0x9F110000 +0x1EF0000
    cp.b 0x80060000 0x9F110000 $filesize
7. After successful flashing, execute:
    boot
8. The access point will boot to OpenWrt. Wait few minutes, until the
    wrench LED will stop blinking, then it's ready for configuration.

Known issues
Initramfs image can't be bigger than specified kernel size, otherwise
bootloader will throw LZMA decompressing error. Switching to lzma-loader
should workaround that.
This device has Winbond 25Q256FVFG and doesn't have reliable reset, which
causes hang on reboot, thus broken-flash-reset needs to be added. This
property addition causes dispaly of "scary" warning on each boot, take
this warnig into consideration.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>

kernel/modules/other/mlxreg: add new package

This commit adds a new mlxreg package, which allows access
to Mellanox programmable device register space through sysfs
interface for thermal control and hardware management.

It also adds required Mellanox I²C drivers and packages
for the "special" MSN4800 series and SN2201 platform.

Signed-off-by: Til Kaiser <mail@tk154.de>

kernel/modules/other/mlx_wdt: add new package

This commit adds a new driver for the hardware watchdog
on Mellanox systems.

Signed-off-by: Til Kaiser <mail@tk154.de>

ramips: samknows whitebox v8: set wifi frequency

Set the 2.4GHz frequency for WiFi.

Fixes: #15391
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>

layerscape: add 6.6 testing kernel

Support is ready. Let's enable 6.6 as testing version.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

layerscape: adjust dts path in image scripts

After the spliting dts folder of ARM architecture in upstream,
layerscape routines need to be adjusted for new solution.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

layerscape: refresh 6.6 config

Mostly done by 'make kernel_oldconfig'.

armv8_64b has added one entry manually:
CONFIG_CRYPTO_CURVE25519=y

as workaround for error:
aarch64-openwrt-linux-musl-ld: crypto/crypto_engine.o: in function
`crypto_engine_register_kpp':
crypto_engine.c:687: undefined reference to `crypto_register_kpp'
crypto_engine.c:687:(.text+0x57c): relocation truncated to fit:
R_AARCH64_CALL26 against undefined symbol `crypto_register_kpp'
aarch64-openwrt-linux-musl-ld: crypto/crypto_engine.o: in function
`crypto_engine_unregister_kpp':
crypto/crypto_engine.c:693: undefined reference to `crypto_unregister_kpp'
crypto_engine.c:693:(.text+0x5a0): relocation truncated to fit:
R_AARCH64_CALL26 against undefined symbol `crypto_unregister_kpp'

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

generic: kernel add 6.6 missing symbols

Found durring works on layerscape.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

layerscape: kernel: refresh 6.6 patches

Taken refreshed version from Layerscape 6.6 tree:
302-arm64-dts-ls1012a-update-with-ppfe-support.patch
304-arm64-dts-ls1012a-rdb-workaround-by-updating-qspi-fl.patch
400-LF-20-3-mtd-spi-nor-Use-1-bit-mode-of-spansion-s25fs.patch
701-staging-add-fsl_ppfe-driver.patch
702-phy-Add-2.5G-SGMII-interface-mode.patch
704-net-phylink-treat-PHY_INTERFACE_MODE_2500SGMII-in-ph.patch

Removed:
704-net-phylink-treat-PHY_INTERFACE_MODE_2500SGMII-in-ph.patch (meld
into 702)

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

kernel/layerscape: Restore kernel files for v6.1

This is an automatically generated commit which aids following Kernel patch history,
as git will see the move and copy as a rename thus defeating the purpose.

See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
for the original discussion.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

kernel/layerscape: Create kernel files for v6.6 (from v6.1)

This is an automatically generated commit.

During a `git bisect` session, `git bisect --skip` is recommended.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

tfa-layerscape: Bump to lf-6.6.3-1.0.0

This commit bumps tfa-layerscape package to version lf-6.6.3-1.0.0

Manually rebased:
001-fiptool-hostbuild-fixes.patch
004-plat-nxp-restore-ls1012afrdm-support.patch

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

uboot-layerscape: bump to lf-6.6.3-1.0.0

This commit bumps u-boot layerscape package to lf-6.6.3-1.0.0 version.

Removed upstreamed:
0001-board-ls1046ardb-force-PCI-device-enumeration.patch
0002-board-ls1043ardb-force-PCI-device-enumeration.patch

Manually rebased:
0900-layerscape-adjust-LS1021A-IOT-config-for-OpenWrt.patch

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

ppfe-firmware: Bump to lf-6.6.3-1.0.0

Bump ppfe-firmware package to lf-6.6.3-1.0.0

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

ls-rcw: Bump to lf-6.6.3-1.0.0

Bump ls-rcw package to lf-6.6.3-1.0.0.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

ls-ddr-phy: bump to lf-6.6.3-1.0.0

Bump ls-ddr-phy to version lf-6.6.3-1.0.0.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

fman-ucode: Bump to lf-6.6.3-1.0.0

Bump fman-ucode to version lf-6.6.3-1.0.0.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

mvebu: add support for Fortinet FortiWiFi 51E

Fortinet FortiWiFi 51E (FWF-51E) is a UTM with 1x WLAN and 1x SSD, based
on Armada 385 (88F6820).

Specification:

- SoC          : Marvell Armada 385 88F6820
- RAM          : DDR3 2 GiB (4x Micron MT41K512M8DA-107, "D9SGQ")
- Flash        : SPI-NOR 128 MiB (Macronix MX66L1G45GMI-10G)
- SSD          : mSATA SSD 32 GB (A-DATA XM21E (AXM21ES3-32GM-B))
  - mode       : SATA III 6Gbps
  - power      : 3.3 VDC, 3.1 W (Max.)
- Ethernet     : 7x 10/100/1000 Mbps
  - LAN 1-5    : Marvell 88E6176
  - WAN 1, 2   : Marvell 88E1512 (2x)
- WLAN         : Fortinet EMP7618-FT (Atheros AR9382 (2T2R))
  - interface  : MiniPCIe
- LEDs/Keys    : 18x/1x
- UART         : "CONSOLE" port (RJ-45, RS-232C level)
  - port       : ttyS0
  - settings   : 9600bps 8n1
  - assignment : 1:NC , 2:NC , 3:TXD, 4:GND,
                 5:GND, 6:RXD, 7:NC , 8:NC
  - note       : compatible with Cisco console cable
- HW Monitoring: nuvoTon NCT7802Y
- Power        : 12 VDC, 2 A
  - plug       : Molex 5557-02R

Flash instruction using initramfs image:

 1. Power on FWF-51E and interrupt to show bootmenu
 2. Call "[I]: System information." -> "[S]: Set serial port baudrate."
    and set baudrate to 9600 bps
 3. Call "[R]: Review TFTP parameters.", check TFTP parameters and
    connect computer to "Image download port" in the parameters
 4. Prepare TFTP server with the parameters obtained above
 5. Rename OpenWrt initramfs image to "image.out" and put to TFTP
    directory
 6. Call "[T]: Initiate TFTP firmware transfer." to download initramfs
    image from TFTP server
 7. Type "R" key when the following message is showed, to boot initramfs
    image without flashing to spi-nor flash

    "Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?"

 8. On initramfs image, backup mtd if needed

    minimum:

    - "firmware-info"
    - "kernel"
    - "rootfs"

 9. On initramfs image, upload sysupgrade image to the device and perform
    sysupgrade
10. Wait ~200 seconds to complete flashing and rebooting.
    If the device is booted with stock firmware, login to bootmenu and
    call "[B]: Boot with backup firmware and set as default." to set the
    first OS image as default and boot it.

Notes:

- Both colors of Bi-color LEDs on the front panel cannot be turned on at
  the same time.

- "PWR" and "Logo" LEDs are connected to power source directly.

- The following partitions are added for OpenWrt.
  These partitions are contained in "uboot" partition (0x0-0x1fffff) on
  stock firmware.

  - "firmware-info"
  - "dtb"
  - "u-boot-env"
  - "board-info"

Image header for bootmenu tftp:

  0x0 - 0xf  : ?
 0x10 - 0x2f : Image Name
 0x30 - 0x17f: ?
0x180 - 0x183: Kernel Offset*
0x184 - 0x187: Kernel Length*
0x188 - 0x18b: RootFS Offset (ext2)*
0x18c - 0x18f: RootFS Length (ext2)*
0x190 - 0x193: DTB Offset
0x194 - 0x197: DTB Length
0x198 - 0x19b: Data Offset (jffs2)
0x19c - 0x19f: Data Length (jffs2)
0x1a0 - 0x1ff: ?

*: required for initramfs image

MAC addresses:

(eth0): 90:6C:AC:xx:xx:98 (board-info (OpenWrt), 0xd880 (hex))
WAN 1 : 90:6C:AC:xx:xx:99
WAN 2 : 90:6C:AC:xx:xx:9A
LAN 1 : 90:6C:AC:xx:xx:9B
LAN 2 : 90:6C:AC:xx:xx:9C
LAN 3 : 90:6C:AC:xx:xx:9D
LAN 4 : 90:6C:AC:xx:xx:9E
LAN 5 : 90:6C:AC:xx:xx:9F
WLAN  : 88:DC:96:xx:xx:xx (MiniPCIe Card)

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Tested-by: Raylynn Knight <rayknight@me.com>