John Crispin [Mon, 19 Oct 2015 10:07:43 +0000 (10:07 +0000)]
ramips: add a baurate hack
When talking to an atmel controller we need 9600 or 250000 baud.
as 250000 does not exist we use
2500000.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47204
John Crispin [Mon, 19 Oct 2015 10:07:38 +0000 (10:07 +0000)]
ramips: add LinkIt Smart7688 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47203
Hauke Mehrtens [Sun, 18 Oct 2015 21:48:32 +0000 (21:48 +0000)]
polarssl: update to version 1.3.14
This fixes CVE-2015-5291 and some other smaller security issues.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47201
Hauke Mehrtens [Sun, 18 Oct 2015 21:48:04 +0000 (21:48 +0000)]
mbedtls: update to version 2.1.2
This fixes CVE-2015-5291 and some other smaller security issues.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47200
Hauke Mehrtens [Sat, 17 Oct 2015 11:50:16 +0000 (11:50 +0000)]
brcm47xx: remove support for kernel 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47199
Hauke Mehrtens [Sat, 17 Oct 2015 11:49:01 +0000 (11:49 +0000)]
bcm53xx: remove support for kernel 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47198
Luka Perkov [Thu, 15 Oct 2015 22:12:13 +0000 (22:12 +0000)]
cosmetic: remove trailing whitespaces
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 47197
Steven Barth [Thu, 15 Oct 2015 08:56:59 +0000 (08:56 +0000)]
6in4: add tunlink option support
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 47189
Felix Fietkau [Mon, 12 Oct 2015 13:11:26 +0000 (13:11 +0000)]
mt76: update to the latest version, fixes tx related crashes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47187
Felix Fietkau [Mon, 12 Oct 2015 13:11:20 +0000 (13:11 +0000)]
firmware-utils/buffalo-enc: explicitly use signed char for checksum function
ARM defaults to unsigned char and that breaks the calculation, as it
relies on sign extension
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47186
Felix Fietkau [Mon, 12 Oct 2015 13:11:03 +0000 (13:11 +0000)]
firmware-utils/buffalo-enc: add support for decrypting data with an offset
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47185
Luka Perkov [Sun, 11 Oct 2015 22:41:30 +0000 (22:41 +0000)]
iperf3: update URL
Update iperf3 to point to the correct project website. Prior URL was the
old iperf2 website.
Signed-off-by: Karl Palsson <karlp@remake.is>
SVN-Revision: 47184
Luka Perkov [Sun, 11 Oct 2015 22:19:25 +0000 (22:19 +0000)]
libnl: fix URL
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
SVN-Revision: 47183
Hauke Mehrtens [Sun, 11 Oct 2015 19:08:08 +0000 (19:08 +0000)]
kernel: generic: add kernel 4.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47182
Hauke Mehrtens [Sun, 11 Oct 2015 19:00:41 +0000 (19:00 +0000)]
tools: firmware-utils: fix compiler warnings
This just fixes a lot of compiler warnings.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47181
John Crispin [Sun, 11 Oct 2015 16:24:43 +0000 (16:24 +0000)]
lantiq: fix use of IRQF_DISABLED in lantiq kmods
The IRQF_DISABLED flag was removed in kernel 4.1 with commit
"genirq: Remove the deprecated 'IRQF_DISABLED' request_irq() flag entirely" [1].
Therefore the compilation of ltq-hcd and ltq-vmmc kmods fails.
[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=
d8bf368d0631d4bc2612d8bf2e4e8e74e620d0cc
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
SVN-Revision: 47180
John Crispin [Sun, 11 Oct 2015 16:24:31 +0000 (16:24 +0000)]
ar71xx: TP-LINK Archer C5 image name
There are more version on market, add version number to the name.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 47179
John Crispin [Sun, 11 Oct 2015 16:24:22 +0000 (16:24 +0000)]
ar71xx/image: migrate all images based on macro TPLINK
Includes images for
rnx-n360rt
tl-mr3220-v1
tl-mr3420-v1
tl-wa701n-v1
tl-wa730rev1
tl-wa7510n
tl-wa801nd-v1
tl-wa830re-v1
tl-wa901nd-v1
tl-wa901nd-v2
tl-wr740n-v1
tl-wr740n-v3
tl-wr743nd-v1
tl-wr841nd-v3
tl-wr841nd-v5
tl-wr841nd-v7
tl-wr842n-v1
tl-wr941nd-v2
tl-wr941nd-v3
tl-wr941nd-v4
tl-wr1043nd-v1
SVN-Revision: 47178
John Crispin [Sun, 11 Oct 2015 16:24:10 +0000 (16:24 +0000)]
ar71xx/image: remove old build step TPLINK-LZMA
all boards has been migrated to the new build step
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47177
John Crispin [Sun, 11 Oct 2015 16:24:01 +0000 (16:24 +0000)]
ar71xx/image: migrate last TPLINK-LZMA images to new build system
Migrate TLWR1043V2 TLWR2543
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47176
John Crispin [Sun, 11 Oct 2015 16:23:53 +0000 (16:23 +0000)]
ar71xx/image: refactor tplink-chn-v2 devices
* use build step mktplinkfw with extra arguments
* remove now unused mktplinkfw-chn-v2
* use Device/tplink
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47175
John Crispin [Sun, 11 Oct 2015 16:23:44 +0000 (16:23 +0000)]
ar71xx/image: add options argument to mktplinkfw step
Allow to pass extra arguments to mktplinkfw step. Some board requires
an extra argument to create a valid image.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47174
John Crispin [Sun, 11 Oct 2015 16:23:35 +0000 (16:23 +0000)]
ar71xx/image: remove unused multiprofile definitons
These profiles covered by new image/Makefile descriptions. Only the old format uses
MultiProfile macro
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47173
John Crispin [Sun, 11 Oct 2015 16:23:26 +0000 (16:23 +0000)]
lantiq: bugfix wrong non pre-emptive crc errors output
This patch fixes a wrong non pre-emptive crc errors output of
dsl_control.sh status.
Signed-off-by: Luca Debernardi <luca.debernardi@gmail.com>
SVN-Revision: 47172
John Crispin [Sun, 11 Oct 2015 16:23:18 +0000 (16:23 +0000)]
brcm2708: use mmd for overlays subdirectory
Fixes https://dev.openwrt.org/ticket/20704
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47171
John Crispin [Sun, 11 Oct 2015 16:23:11 +0000 (16:23 +0000)]
mtools: build and install mmd
useful for making MS-DOS subdirectories
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47170
John Crispin [Sun, 11 Oct 2015 16:23:01 +0000 (16:23 +0000)]
brcm2708: all sound overlays require i2c to work
Tested on RPi B+ with HiFiBerry Amp+
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47169
Luka Perkov [Sat, 10 Oct 2015 12:35:02 +0000 (12:35 +0000)]
imx6: fix platform checking
Fix platform checking when configuring networks and when doing sysupgrade.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 47168
Luka Perkov [Sat, 10 Oct 2015 12:34:45 +0000 (12:34 +0000)]
uboot-envtools: Add Gateworks Ventana Support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 47167
Michael Büsch [Fri, 9 Oct 2015 07:46:12 +0000 (07:46 +0000)]
omap24xx: Append dtb to the zImage
We just hardcode the n810 dtb for now. It should be selectable via profiles.
SVN-Revision: 47166
Imre Kaloz [Thu, 8 Oct 2015 10:01:30 +0000 (10:01 +0000)]
mvebu: add support for the Linksys WRT1900ACS (Shelby)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 47164
Jo-Philipp Wich [Wed, 7 Oct 2015 22:14:48 +0000 (22:14 +0000)]
uhttpd: fix keep-alive bug (#20607, #20661)
The two commits
5162e3b0ee7bd1d0fd6e75e1ca7993a1834b5291
"allow request handlers to disable chunked reponses"
and
618493e378e2239f0d30902e47adfa134e649fdc
"file: disable chunked encoding for file responses"
broke the chunked transfer encoding handling for proc responses in keep-alive
connections that followed a file response with http status 204 or 304.
The effect of this bug is that cgi responses following a 204 or 304 one where
sent neither in chunked encoding nor with a content-length header, causing
browsers to stall until the keep alive timeout was reached.
Fix the logic flaw by inverting the chunk prevention flag in the client state
and by testing the chunked encoding preconditions every time instead of
once upon client (re-)initialization.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47161
Steven Barth [Wed, 7 Oct 2015 21:11:24 +0000 (21:11 +0000)]
base-files: revert to default ECN settings
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 47160
John Crispin [Wed, 7 Oct 2015 12:12:48 +0000 (12:12 +0000)]
lantiq: activate spi-xway on TDW89X0
use the hardware spi core in favour of spi-gpio.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47159
John Crispin [Wed, 7 Oct 2015 12:12:35 +0000 (12:12 +0000)]
lantiq: spi driver fix
adds a missing wait busy. based on the UGW patch 2060..
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47158
Michael Büsch [Wed, 7 Oct 2015 10:51:18 +0000 (10:51 +0000)]
dl_cleanup: Fix linux blacklist
SVN-Revision: 47157
Michael Büsch [Wed, 7 Oct 2015 10:03:16 +0000 (10:03 +0000)]
dl_cleanup: Port to Python 3
SVN-Revision: 47156
Michael Büsch [Wed, 7 Oct 2015 09:40:42 +0000 (09:40 +0000)]
omap24xx: Add missing kconfig options
SVN-Revision: 47155
Michael Büsch [Wed, 7 Oct 2015 08:30:58 +0000 (08:30 +0000)]
omap24xx: KERNEL_PATCHVER:=4.1
SVN-Revision: 47154
Michael Büsch [Wed, 7 Oct 2015 08:29:06 +0000 (08:29 +0000)]
omap24xx: Remove 4.0
SVN-Revision: 47153
John Crispin [Wed, 7 Oct 2015 08:00:54 +0000 (08:00 +0000)]
lantiq: bugfix luci lantiq_dsl status
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Helge Mader <hmader@tdt.de>
Reported-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47152
John Crispin [Wed, 7 Oct 2015 08:00:40 +0000 (08:00 +0000)]
ramips: fix /target/linux/ramips/dts/HC5XXX.dtsi
dtb complained about those lines
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47151
Felix Fietkau [Tue, 6 Oct 2015 12:33:10 +0000 (12:33 +0000)]
hostapd: wait longer for inactive client probe (empty data frame)
One second is not enough for some devices to ackowledge null data frame
which is sent at the end of ap_max_inactivity interval. In particular,
this causes severe Wi-Fi instability with Apple iPhone which may take
up to 3 seconds to respond.
Signed-off-by: Dmitry Ivanov <dima@ubnt.com>
SVN-Revision: 47149
Felix Fietkau [Tue, 6 Oct 2015 12:33:04 +0000 (12:33 +0000)]
kernel: drop the now unused kmod-oprofile package
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47148
Felix Fietkau [Tue, 6 Oct 2015 12:32:59 +0000 (12:32 +0000)]
oprofile: drop kmod-oprofile dependency, it uses the perf API now
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47147
Felix Fietkau [Tue, 6 Oct 2015 12:32:31 +0000 (12:32 +0000)]
ramips: enable mt76 by default for the mt7620 subtarget (for devices with mt7620 + mt7612)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47146
Felix Fietkau [Mon, 5 Oct 2015 22:30:01 +0000 (22:30 +0000)]
mt76: update to the latest version, adds a few minor fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47143
Felix Fietkau [Mon, 5 Oct 2015 15:43:14 +0000 (15:43 +0000)]
mac80211: add a fix to initialize the tid field in the tx queue struct
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47142
Felix Fietkau [Mon, 5 Oct 2015 14:11:30 +0000 (14:11 +0000)]
build: include homebrew include/library directory in cflags/ldflags on mac os x
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47139
Felix Fietkau [Mon, 5 Oct 2015 14:11:25 +0000 (14:11 +0000)]
build: use host cflags/ldflags for openssl prereq check
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47138
Felix Fietkau [Mon, 5 Oct 2015 11:34:16 +0000 (11:34 +0000)]
ramips: improve read performance of the m25p80 chunked io patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47137
John Crispin [Mon, 5 Oct 2015 10:29:01 +0000 (10:29 +0000)]
lldpd: wrap procd command args in separate quotes
Seems the match pattern was being adapted from 'eth0' to ' eth0'
because of the way I added the procd command args.
This did not seem to be a problem when there were multiple interfaces,
just on devices with single interfaces for lldpd to listen on.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 47136
John Crispin [Mon, 5 Oct 2015 10:28:53 +0000 (10:28 +0000)]
base-files: add URL option for OEM manufacturer info
This URL can be embedded e.g. within UPnP announcements where a link
to the manufacturer's homepage is desired.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 47135
John Crispin [Mon, 5 Oct 2015 10:28:47 +0000 (10:28 +0000)]
openvpn: add handling for route-pre-down option
OpenVPN 2.3 added a route-pre-down option, to run a command before
routes are removed upon disconnection.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
SVN-Revision: 47134
John Crispin [Mon, 5 Oct 2015 10:28:39 +0000 (10:28 +0000)]
uboot_envtools: add P2812HNUF1
Add generation of /etc/fw_env.config for P2812HNUF1
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
SVN-Revision: 47133
John Crispin [Mon, 5 Oct 2015 10:28:34 +0000 (10:28 +0000)]
lantiq: several ARV7519RW22 fixes
Fixes ARV7519RW22 flash register (only 1 flash).
Power LED is green, not red.
Rename message LEDs to internet.
Add LEDs configuration (lan, wan, power).
Enable switch VLANs.
Fix secondary USB.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
SVN-Revision: 47132
John Crispin [Mon, 5 Oct 2015 10:28:26 +0000 (10:28 +0000)]
lantiq: make v4.1 the default kernel
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47131
John Crispin [Mon, 5 Oct 2015 10:28:19 +0000 (10:28 +0000)]
lantiq: Add target TP-Link TD-W8980
The device is similar to the TD-W8970, beside a different Atheros 2.4 GHz
wireless chip and the additional, PCI connected, WAVE300 5 GHz wireless.
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
SVN-Revision: 47130
John Crispin [Mon, 5 Oct 2015 10:28:12 +0000 (10:28 +0000)]
lantiq: fix ath_pci_fixup hang on bridged devices
Port of r41856.
In contrast to the brcm63xx target, it isn't sufficient to enable/disable
the bridge. The device needs to be enabled/disabled to fix the hang. The
bridge will be automatically enabled by the time the connected device is
enabled.
Fixes boot on TD-W8980.
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47129
John Crispin [Mon, 5 Oct 2015 10:28:07 +0000 (10:28 +0000)]
lantiq: Change the data-type of mac address in ETOP driver
This adds the changes from r46219 to the linux 4.1 patches as well.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47128
John Crispin [Mon, 5 Oct 2015 10:27:55 +0000 (10:27 +0000)]
lantiq: bugfix uninitialized variables
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Reported-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 47127
John Crispin [Mon, 5 Oct 2015 10:27:49 +0000 (10:27 +0000)]
brcm2708: keep boot partition mounted to allow users to change config.txt
This way it's easier to configure device tree overlays, customize other
parameters...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47126
John Crispin [Mon, 5 Oct 2015 10:27:41 +0000 (10:27 +0000)]
brcm2708: add support for device tree overlays
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47125
John Crispin [Mon, 5 Oct 2015 10:27:34 +0000 (10:27 +0000)]
brcm2708: switch device tree compilation to linux
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47124
John Crispin [Mon, 5 Oct 2015 10:27:18 +0000 (10:27 +0000)]
brcm2708: fix kmod-sound-soc-bcm2708-i2s config
Right now, selecting kmod-sound-soc-bcm2708-i2s causes build errors due to
missing configs.
kmod-regmap enables I2C and SPI, causing build errors due to depending
variables not defined.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47123
John Crispin [Mon, 5 Oct 2015 10:27:09 +0000 (10:27 +0000)]
ramips: improve systick timer
when sleep mode is disable use MIPS as clocksource and clockevent instead of systick.
because MIPS timer has higher resolution 5ns less than systick 20us and
larger counter bits 32 > 16.
clean interrupt by write compare register at isr.
fix typo cause sleep mode not enable.
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47122
John Crispin [Mon, 5 Oct 2015 10:27:04 +0000 (10:27 +0000)]
ramips: fix use remove_irq to release irqaction resource
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47121
John Crispin [Mon, 5 Oct 2015 10:27:00 +0000 (10:27 +0000)]
ramips: add support for 16MB VoCore
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47120
John Crispin [Mon, 5 Oct 2015 10:26:54 +0000 (10:26 +0000)]
ramips: fix size-cells for spi nodes
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47119
John Crispin [Mon, 5 Oct 2015 10:26:40 +0000 (10:26 +0000)]
ramips: Ralink RT3883 RGMII pinmux fix.
Due to datasheet of rt3883 SoC rgmii1 port handles pins 84-95 and rgmii2 port handles pins 72-83. When this function ports gets added to rt3883_pinmux_data there's wrong pinmux bits set (RT3883_GPIO_MODE_GE1 manages 84-95 pins and RT3883_GPIO_MODE_GE2 manages 72-83). So when enabling rgmii2 as GPIO driver confuses hardware and nothing work, neither rgmii nor gpio.
Also in '0030-pinctrl-ralink-add-pinctrl-driver.patch' typo in name of rgmii2 port.
Signed-off-by: Nick Leiten <nickleiten@gmail.com>
SVN-Revision: 47118
John Crispin [Mon, 5 Oct 2015 10:26:34 +0000 (10:26 +0000)]
ramips: Enable rx of 1536 bytes ethernet frames on MT7621
The default switch frame size (with FCS + header) is 1536 bytes. But the
GMAC only accepted frames up to 1522 bytes. Setting it to 1536 allows to
receive ethernet frames using the full of MTU 1500 + an extra VLAN header +
VLAN header added by the switch.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47117
John Crispin [Mon, 5 Oct 2015 10:26:28 +0000 (10:26 +0000)]
ramips: Fix too small rx buffer
The driver assumes that the maximum received buffer for non-jumbo frames is
1536 bytes. But the allocation of the rx fragment doesn't reflect that. It
currently allocates fragments which will only be large enough to be used as
rx buffer with the size of 1534 bytes. This is problematic because the GMAC
will now try to write to 2 bytes which don't belong to its receive buffer
when a large enough ethernet frame is received.
This may already be a problem on existing chips but will at least become a
problem when the 1536 byte rx modus is enabled on MT7621a. It is required
on this SoC to receive ethernet frames which use their full 1500 bytes MTU
and a VLAN header next to the switch VLAN tag.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47116
John Crispin [Mon, 5 Oct 2015 10:26:21 +0000 (10:26 +0000)]
ramips: Fix setting of rx buffer length
The length of the DMA rx buffer was always set to 0 because the function
for extracting the length was used to calculate the value for setting it.
Instead the macro has to be split in a get and set function similar to the
TX_DMA_(GET_|)PLEN(0|1) macro.
No problem was noticed on MT7621a before this was changed and thus maybe it
was hidden by different problem which is not yet fixed.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47115
John Crispin [Mon, 5 Oct 2015 10:26:09 +0000 (10:26 +0000)]
ramips: Allow to receive vlan over untag ports on MT7530
The MT7530 switch driver with enable_vlan set will automatically set all
ports to the user port mode. The hardware will remove the incoming vlan tag
on these ports and use it for its internal vlan. This is usually not wanted
and makes it impossible to communicate via vlan over the switch in both
directions.
It is possible to configure a switch port to "transparent mode" when this
port is only used as untag in the switch VLANs. This will disable the VLAN
untagging of packets when they were received on this port. The tagging on
"tag" ports based on the vlan id is still working.
The transparent port mode cannot be used when a port is both used in a VLAN
as "tag" and in another one as "untag" port.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47114
John Crispin [Mon, 5 Oct 2015 10:26:02 +0000 (10:26 +0000)]
ramips: Add build files for HiWiFi HC5x61 models
HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com <http://www.hiwifi.com/>. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.
The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval.
v3 fix
1: Spaces -> Tabs
2: Removed some packages
Signed-off-by: Xiaoning Kang <kangxn@163.com>
SVN-Revision: 47113
John Crispin [Mon, 5 Oct 2015 10:25:53 +0000 (10:25 +0000)]
ramips: Add DTS files for HiWiFi HC5x61 models
HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.
The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval.
v3 fix
1: Merged most stuff into dtsi file
2: Remove unnecessary empty lines.
Signed-off-by: Xiaoning Kang <kangxn@163.com>
SVN-Revision: 47112
John Crispin [Mon, 5 Oct 2015 10:25:47 +0000 (10:25 +0000)]
ramips: Add base-files for HiWiFi HC5x61 models
HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.
The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval.
v3 fix
1: Fixed model order
2: Remove manufacturer name from model name
3: Use a hacky but prettier way to get mac address.
Signed-off-by: Xiaoning Kang <kangxn@163.com>
SVN-Revision: 47111
John Crispin [Mon, 5 Oct 2015 10:25:40 +0000 (10:25 +0000)]
ar71xx: Correct WeIO board name
Trivial parch to correct WeIO board name in the system.
Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com>
SVN-Revision: 47110
John Crispin [Mon, 5 Oct 2015 10:25:28 +0000 (10:25 +0000)]
target/mpc85xx: check if 'generic' subtarget for image file cuImage.tl-wdr4900-v1
Only add 'cuImage.tl-wdr4900-v1' to KERNEL_IMAGES if
the selected subtarget is 'generic'.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 47109
Jo-Philipp Wich [Mon, 5 Oct 2015 09:10:17 +0000 (09:10 +0000)]
iwinfo: nl80211: add support for reading TX power from netlink
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47108
Rafał Miłecki [Mon, 5 Oct 2015 08:54:26 +0000 (08:54 +0000)]
ar71xx: rename firmware for Chinese version of TL-WR941ND v6
It seems there are two *different* versions on TL-WR941ND v6: Chinese
and European one. Currently supported by OpenWrt is Chinese one. Rename
firmware to make it clear.
For details see:
http://wiki.openwrt.org/toh/tp-link/tl-wr941nd
https://forum.openwrt.org/viewtopic.php?id=59295
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47107
Matteo Croce [Sun, 4 Oct 2015 22:10:18 +0000 (22:10 +0000)]
lantiq: fix gcc 5 build
SVN-Revision: 47106
Matteo Croce [Sun, 4 Oct 2015 22:03:04 +0000 (22:03 +0000)]
lantiq: fix binutils 2.15.1 build
SVN-Revision: 47105
Hauke Mehrtens [Sun, 4 Oct 2015 11:34:39 +0000 (11:34 +0000)]
kernel: update 4.1 to 4.1.10
Fixes a regression on spi flash devices (upstream commit
1583eaece6fa).
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.7
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.8
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.9
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.10
096-ipv4-off-by-one-in-continuation-handling-in-proc-net.patch was applied
upstream and dropped.
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
[update from 4.1.9 to 4.1.10]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47104
Jo-Philipp Wich [Sat, 3 Oct 2015 09:49:24 +0000 (09:49 +0000)]
toplevel.mk: drop LD_LIBRARY_PATH overrides
Overriding LD_LIBRARY_PATH for host utilities frequently leads to problems
with host executables loading shared libraries from the staging_dir, leading
to crashes due to incompatible ABIs.
Since most host utilties either embed a proper rpath or are reworked to link
statically we do not need the workaround anymore.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47103
Felix Fietkau [Fri, 2 Oct 2015 16:24:15 +0000 (16:24 +0000)]
libnl: Install include files into libnl3
Install header files into same location as pkgconfig/libnl-3.0.pc says:
Cflags: -I${includedir}/libnl3
Signed-off-by: Bruno Randolf <br1@einfach.org>
SVN-Revision: 47102
Steven Barth [Fri, 2 Oct 2015 08:24:35 +0000 (08:24 +0000)]
iproute2: adapt coexistence layer to new unified path
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 47081
Steven Barth [Fri, 2 Oct 2015 08:24:32 +0000 (08:24 +0000)]
base-files: sanitize and unify $PATH
Previously init and hotplug paths were different from console.
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 47080
Rafał Miłecki [Fri, 2 Oct 2015 06:03:13 +0000 (06:03 +0000)]
procd: make nand_do_platform_check check image only
Recently all targets have been updated to call nand_do_upgrade directly.
It's not needed anymore to leave a magic /tmp/sysupgrade-nand-path mark
during image check.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47079
Felix Fietkau [Thu, 1 Oct 2015 19:50:06 +0000 (19:50 +0000)]
musl: re-enable des crypto support, fixes pppd MPPE issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47078
Felix Fietkau [Thu, 1 Oct 2015 19:50:01 +0000 (19:50 +0000)]
toolchain/uClibc: add support of uClibc-ng
uClibc-ng is a spin-off of original uClibc, see http://www.uclibc-ng.org/
We try to regularly add changes from uClibc to uClibc-ng.
We even sent patches and bug reports to the uClibc mailing list.
The config file is compatible between uClibc-ng 1.0 and uClibc git master.
This might change in the future.
Our main goal is to provide regularly a stable and tested release
to make embedded system developers happy.
The main advantage of uClibc-ng over olde good uClibc is regular releases
so there's no need to keep tons of patches on top of years old
0.9.33.2
Build-tested for
[1] ARM: Sunxi generic
[2] MIPS: Netgear WNDR3600/3700/3800
Run-tested for [yet out of the tree] Synopsys Designware ARC AXS101.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Waldemar Brodkorb <wbx@uclibc-ng.org>
Cc: Mathieu Olivari <mathieu@codeaurora.org>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
SVN-Revision: 47077
John Crispin [Thu, 1 Oct 2015 19:12:14 +0000 (19:12 +0000)]
ralink: add irq to mt7628 gpio node
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47076
John Crispin [Thu, 1 Oct 2015 18:44:26 +0000 (18:44 +0000)]
rpcd: update to latest git HEAD
Provides ubus calls for sysupgrade and password changing.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47075
John Crispin [Thu, 1 Oct 2015 18:13:47 +0000 (18:13 +0000)]
ralink: the mmc driver can now handle CD lines that are active low
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47074
John Crispin [Thu, 1 Oct 2015 15:35:44 +0000 (15:35 +0000)]
ralink: speed selection was broken in spi-mt7621
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47073
Jo-Philipp Wich [Tue, 29 Sep 2015 11:37:27 +0000 (11:37 +0000)]
quilt: add further relocatability fixes
Prevent quilt's build system from generating useless compat wrappers and
hardcoded absolute utility paths to binaries in staging_dir/host/.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47070
Jo-Philipp Wich [Tue, 29 Sep 2015 11:37:10 +0000 (11:37 +0000)]
prereq-build: test availability of Perl Thread::Queue module
This is needed for building automake.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47069
Felix Fietkau [Mon, 28 Sep 2015 12:22:35 +0000 (12:22 +0000)]
uml: backport another upstream patch to fix compile errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47067
Felix Fietkau [Mon, 28 Sep 2015 09:40:39 +0000 (09:40 +0000)]
base-files: add a dependency on fstools
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47066
Rafał Miłecki [Mon, 28 Sep 2015 09:09:00 +0000 (09:09 +0000)]
hostapd: check for banned client on association event
When using FullMAC drivers (e.g. brcmfmac) we don't get mgmt frames so
check for banned client in probe request handler won't ever be used.
Since cfg80211 provides us info about STA associating let's put a check
there.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47064
projects / openwrt / staging / jow.git / log