Steven Barth [Fri, 12 Dec 2014 09:39:07 +0000 (09:39 +0000)]
netifd: Set source IP for DHCP static routes as well
Commit
ce92f6650bd8a86db04c7a6cbb58e7fdb200a7e6 added source IP support
for DHCP default routes. As a side effect of this change the default route
could be present twice in netifd (once with source IP set and once with
source IP unset) if it was sent by the server in both the router and static
route options. Therefore add source IP support as well for static routes as this
case was not considered. Additional remove unused parameter type.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 43645
Luka Perkov [Thu, 11 Dec 2014 23:29:07 +0000 (23:29 +0000)]
kernel: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43643
Luka Perkov [Thu, 11 Dec 2014 23:29:04 +0000 (23:29 +0000)]
kirkwood: sort 110-nas profile
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43642
John Crispin [Thu, 11 Dec 2014 22:27:56 +0000 (22:27 +0000)]
au1000: revert 43626 due to syntax errors
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43641
John Crispin [Thu, 11 Dec 2014 20:41:51 +0000 (20:41 +0000)]
oxnas: use ARM BCJ filter for XZ decompression
Restoring the config for kernel 3.14 didn't contain that change already
made to config-3.18.
It is needed to make squashfs in the kernel match the compression settings
for ARCH=arm in the framework.
If set to ARMTHUMB, boot fails due to squashfs being unreadable if the
filesystem was generated for wth ARM BCJ filter.
in include/image.mk: BCJ_FILTER:=-Xbcj $(LINUX_KARCH)
Thus the ARM filter is used for all ARM targets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43640
Rafał Miłecki [Thu, 11 Dec 2014 20:31:07 +0000 (20:31 +0000)]
bcm53xx: failsafe support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43639
Felix Fietkau [Thu, 11 Dec 2014 20:07:58 +0000 (20:07 +0000)]
cfg80211: add support for changing the device mac address via sysfs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43638
Felix Fietkau [Thu, 11 Dec 2014 20:07:52 +0000 (20:07 +0000)]
xburst: fix subtarget config file names
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43637
Felix Fietkau [Thu, 11 Dec 2014 20:07:45 +0000 (20:07 +0000)]
x86: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43636
Felix Fietkau [Thu, 11 Dec 2014 20:07:39 +0000 (20:07 +0000)]
octeon: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43635
Felix Fietkau [Thu, 11 Dec 2014 20:07:31 +0000 (20:07 +0000)]
adm8668: remove linux 3.3 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43634
Jonas Gorski [Thu, 11 Dec 2014 19:35:48 +0000 (19:35 +0000)]
libnl-tiny: fix receiving netlink messages larger than 4K
Apply libnl commit
807fddc4cd9ecb12ba64e1b7fa26d86b6c2f19b0 ("nl:
Increase receive buffer size to 4 pages") also to libnl-tiny to ensure
netlink messages larger than 4KiB can be received, as the restart logic
seems to be broken.
This fixes iwinfo accessing info on dual band b43 cards, as they can
support a lot of channels, breaking the 4K default limit (seen was >5k).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43633
Jonas Gorski [Thu, 11 Dec 2014 19:35:43 +0000 (19:35 +0000)]
ar7: remove config-3.10
Remove a leftover file from the 3.10 support removal.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43632
Jonas Gorski [Thu, 11 Dec 2014 19:35:36 +0000 (19:35 +0000)]
kernel/acx-mac80211: fix autoloading on boot
The kernel build system cannot track dependencies of out-of-tree
modules, making the buildsystem fail to load mac80211.
Add mac80211 as an explicit load to ensure all required modules are
loaded.
Fixes #16522.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43631
John Crispin [Thu, 11 Dec 2014 18:58:12 +0000 (18:58 +0000)]
netlogic: sync kernel config
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43630
John Crispin [Thu, 11 Dec 2014 18:54:30 +0000 (18:54 +0000)]
ralink: mt7621 was missing a symbol that made the CC builder fail
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43629
John Crispin [Thu, 11 Dec 2014 18:39:22 +0000 (18:39 +0000)]
mcp85xx/p1020: fixup config-default
this was missed during the 3.14 bump
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43628
John Crispin [Thu, 11 Dec 2014 18:35:41 +0000 (18:35 +0000)]
kernel/modules: fix chipidea
it should needs to depend on imx and mxs
also remove duplicate kmod definition from mxs target
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43627
John Crispin [Thu, 11 Dec 2014 18:28:44 +0000 (18:28 +0000)]
au1000: distinguish different models and set correct MAC-address
The target au1000 has at least 2 different models, the
'InternetBox' and the 'MeshCube' which look very similar
from the kernel point of view but are totally different
devices which base on the same design. Populating /tmp/sysinfo
now. The 1st one has an issue which leads to a random
mac-address after each boot which is corrected now via
reading the bootloader-env. The real fix would be
converting to DTS, this is only a workaround now.
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43626
Felix Fietkau [Thu, 11 Dec 2014 18:18:16 +0000 (18:18 +0000)]
mpc85xx: fix another typo in the image makefile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43625
Felix Fietkau [Thu, 11 Dec 2014 18:18:10 +0000 (18:18 +0000)]
mpc85xx: add missing devicetree ranges property for ethernet devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43624
Felix Fietkau [Thu, 11 Dec 2014 17:52:22 +0000 (17:52 +0000)]
toolchain: disable libatomic for gcc 4.6
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43623
Felix Fietkau [Thu, 11 Dec 2014 17:52:12 +0000 (17:52 +0000)]
mpc85xx: fix typo in image name
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43622
Felix Fietkau [Thu, 11 Dec 2014 17:03:04 +0000 (17:03 +0000)]
sdk: add missing kernel include files
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43621
Felix Fietkau [Thu, 11 Dec 2014 15:29:39 +0000 (15:29 +0000)]
mpc85xx: fix initramfs images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43620
Felix Fietkau [Thu, 11 Dec 2014 15:29:33 +0000 (15:29 +0000)]
kernel: allow specifying kernel images to be copied separately from kernel make command line
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43619
Felix Fietkau [Thu, 11 Dec 2014 14:38:50 +0000 (14:38 +0000)]
uClibc: fix ptrace header files for powerpc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43617
Rafał Miłecki [Thu, 11 Dec 2014 11:23:26 +0000 (11:23 +0000)]
bcm53xx: support LEDs on Buffalo devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43616
Steven Barth [Thu, 11 Dec 2014 10:30:51 +0000 (10:30 +0000)]
Move telephony feed to github
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43614
Luka Perkov [Thu, 11 Dec 2014 01:20:41 +0000 (01:20 +0000)]
kirkwood: add 3.18 support
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43613
Rafał Miłecki [Wed, 10 Dec 2014 21:50:57 +0000 (21:50 +0000)]
bcm53xx: backport NVRAM driver sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43612
Rafał Miłecki [Wed, 10 Dec 2014 21:24:11 +0000 (21:24 +0000)]
bcm53xx: use bcma callback in SPROM driver to fill the SPROM
This is required because it has to be called at very precise moment. See
comment in driver for details.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43611
Felix Fietkau [Wed, 10 Dec 2014 21:17:14 +0000 (21:17 +0000)]
mt76: update to the latest version, adds a few minor build fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43610
Felix Fietkau [Wed, 10 Dec 2014 21:17:05 +0000 (21:17 +0000)]
mac80211: do not export the backports linux/module.h, it breaks out-of-tree driver builds
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43609
Rafał Miłecki [Wed, 10 Dec 2014 19:56:56 +0000 (19:56 +0000)]
bcm53xx: use static NVRAM pointer for now
This will allow us to sync with code sent for upstream.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43608
Luka Perkov [Wed, 10 Dec 2014 18:55:53 +0000 (18:55 +0000)]
kernel: drop CONFIG_PROC_DEVICETREE in 3.18
This option was removed in upstream commit
8357041.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43607
Rafał Miłecki [Wed, 10 Dec 2014 18:29:26 +0000 (18:29 +0000)]
bcm53xx: clean up nvram header
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43606
Luka Perkov [Wed, 10 Dec 2014 18:13:34 +0000 (18:13 +0000)]
kernel: add missing config symbols for 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43605
Rafał Miłecki [Wed, 10 Dec 2014 18:07:01 +0000 (18:07 +0000)]
bcm53xx: move SPROM driver to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43604
Rafał Miłecki [Wed, 10 Dec 2014 18:01:24 +0000 (18:01 +0000)]
bcm53xx: move NVRAM driver to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43603
Rafał Miłecki [Wed, 10 Dec 2014 17:37:24 +0000 (17:37 +0000)]
bcm53xx: move NVRAM header to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43602
Felix Fietkau [Wed, 10 Dec 2014 16:03:02 +0000 (16:03 +0000)]
uclient: update to the latest version, fixes HTTP digest auth processing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43600
Felix Fietkau [Wed, 10 Dec 2014 16:02:49 +0000 (16:02 +0000)]
libnl-tiny: remove dead code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43599
John Crispin [Wed, 10 Dec 2014 15:51:07 +0000 (15:51 +0000)]
oxnas: add support for 2nd S-ATA port to sata_oxnas driver
similar to mv_sata, use nr-ports attribute from device tree.
import and adapt locking code from vendor GPL sources.
add dma controller handling, it may be used in future to avoid
full core resets similar to the vendor SDK's "progressive cleanup"
function.
this is still very dirty and aimed to first of all do things
quite exactly like the reference code. and it somehow works.
obviously there is lots of room for improvement :)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43598
John Crispin [Wed, 10 Dec 2014 15:51:00 +0000 (15:51 +0000)]
oxnas: add copyright header to sata_oxnas
sata_oxnas.c is obviously a refactored version of sata_ox820.c
which does contain this header.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43597
John Crispin [Wed, 10 Dec 2014 15:50:52 +0000 (15:50 +0000)]
scripts: use extended-remote for greater compatibility
Plain "remote" results in failure to connect using the gdb built with
the toolchain. (On atheros target at least) extended-remote also allows
"run" to restart the target process.
Signed-off-by: Karl Palsson <karlp@remake.is>
SVN-Revision: 43596
John Crispin [Wed, 10 Dec 2014 15:50:43 +0000 (15:50 +0000)]
umbim: fix build for 64bit targets
the CC builder fails to build umbim for 64bit targets (xlp, malta64, ....)
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43595
Luka Perkov [Wed, 10 Dec 2014 14:00:53 +0000 (14:00 +0000)]
kernel/modules: add f2fs support
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43594
Steven Barth [Wed, 10 Dec 2014 10:41:51 +0000 (10:41 +0000)]
odhcp6c: correctly handle renew-replies with short lease times
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43592
Luka Perkov [Tue, 9 Dec 2014 23:29:52 +0000 (23:29 +0000)]
kernel: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43591
Luka Perkov [Tue, 9 Dec 2014 23:29:49 +0000 (23:29 +0000)]
kirkwood: Iomega ix2-200: use all remaining MTD space for rootfs
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43590
Felix Fietkau [Tue, 9 Dec 2014 12:35:18 +0000 (12:35 +0000)]
kernel: add netfilter.mk to modules makefile SCAN_DEPS
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43589
Felix Fietkau [Tue, 9 Dec 2014 12:28:46 +0000 (12:28 +0000)]
ar71xx: improve ethernet driver cache footprint by removing an unnecessary pointer
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43588
Felix Fietkau [Tue, 9 Dec 2014 11:01:49 +0000 (11:01 +0000)]
kernel: add a patch to make netfilter conntrack cache routing information
Significantly improves routing / NAT performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43587
Felix Fietkau [Tue, 9 Dec 2014 09:38:33 +0000 (09:38 +0000)]
ar71xx: remove another leftover broken chunk of code in the unaligned access hacks patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43586
Rafał Miłecki [Mon, 8 Dec 2014 18:28:54 +0000 (18:28 +0000)]
bcm53xx: bcm_nand: fix compilation
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43584
Steven Barth [Mon, 8 Dec 2014 17:43:14 +0000 (17:43 +0000)]
netifd: several fixes and optimizations
Thanks to Hans Dedecker and Kristian Evensen
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43583
Steven Barth [Mon, 8 Dec 2014 17:43:03 +0000 (17:43 +0000)]
This patch depends on "Pass source address to proto_add_ipv4_route".
I have not found a scenario that would break by setting the source address on
default, but please let me know if any special considerations should be taken.
Signed-off-by: Kristian Evensen <kristian.evensen at gmail.com>
SVN-Revision: 43582
John Crispin [Mon, 8 Dec 2014 17:40:53 +0000 (17:40 +0000)]
opkg: make PKG_UPGRADE available during preinst hook
https://dev.openwrt.org/ticket/18479
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43581
Rafał Miłecki [Mon, 8 Dec 2014 17:39:07 +0000 (17:39 +0000)]
bcm53xx: bcm_nand: switch from cmdlinepart to ofpart
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43580
Rafał Miłecki [Mon, 8 Dec 2014 17:02:28 +0000 (17:02 +0000)]
brcm47xx: add WNDR3400 V3 buttons
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43579
Jonas Gorski [Mon, 8 Dec 2014 16:11:52 +0000 (16:11 +0000)]
brcm63xx: fix a few issues in irq chip drivers
Fix locking and lock usage, making it compile for SMP.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43578
Jonas Gorski [Mon, 8 Dec 2014 16:11:32 +0000 (16:11 +0000)]
brcm63xx: alphabetically order image generation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43577
Jonas Gorski [Mon, 8 Dec 2014 16:11:26 +0000 (16:11 +0000)]
brcm63xx: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43576
Jonas Gorski [Mon, 8 Dec 2014 16:11:08 +0000 (16:11 +0000)]
brcm63xx: add DT support for USR9108
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43575
Jonas Gorski [Mon, 8 Dec 2014 16:11:03 +0000 (16:11 +0000)]
brcm63xx: add DT support for
F5D7633
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43574
Jonas Gorski [Mon, 8 Dec 2014 16:10:54 +0000 (16:10 +0000)]
brcm63xx: add DT support for DG834GT/PN
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43573
Jonas Gorski [Mon, 8 Dec 2014 16:10:46 +0000 (16:10 +0000)]
brcm63xx: add DT support for TD-W8900GB
According to the vendor tarball, the TD-w8900GB's flash has 64k erase
block size, but CFE spans two blocks. So fixup the image offset
accordingly but keep block size at its default (64k).
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: add commit message, add image offset, change nvram offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43572
Jonas Gorski [Mon, 8 Dec 2014 16:10:41 +0000 (16:10 +0000)]
brcm63xx: add DT support for DSL-2640B
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43571
Jonas Gorski [Mon, 8 Dec 2014 16:10:17 +0000 (16:10 +0000)]
brcm63xx: add DT support for CPVA642
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43570
Felix Fietkau [Mon, 8 Dec 2014 13:16:35 +0000 (13:16 +0000)]
kernel: update linux 3.18 to final release
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43569
Felix Fietkau [Mon, 8 Dec 2014 12:50:37 +0000 (12:50 +0000)]
kernel: backport an upstream xfrm crash fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43568
Felix Fietkau [Mon, 8 Dec 2014 12:21:17 +0000 (12:21 +0000)]
kernel: add missing check for skb->dev on netfilter xfrm optimization patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43567
Felix Fietkau [Mon, 8 Dec 2014 12:04:34 +0000 (12:04 +0000)]
kernel: remove the obsolete vm_exports patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43565
Felix Fietkau [Mon, 8 Dec 2014 12:04:25 +0000 (12:04 +0000)]
kernel: refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43564
Felix Fietkau [Mon, 8 Dec 2014 12:03:53 +0000 (12:03 +0000)]
kernel: update linux 3.14 to 3.14.26
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43563
Felix Fietkau [Mon, 8 Dec 2014 12:03:47 +0000 (12:03 +0000)]
qos-scripts: fix insmod commands
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43562
Felix Fietkau [Mon, 8 Dec 2014 12:03:41 +0000 (12:03 +0000)]
kmod-crypto-hw-talitos: add missing dependency
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43561
Felix Fietkau [Mon, 8 Dec 2014 10:48:28 +0000 (10:48 +0000)]
ar71xx: fix invalid pointer accesses caused by unaligned access hacks (#18455)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43560
Felix Fietkau [Mon, 8 Dec 2014 10:04:50 +0000 (10:04 +0000)]
x86: update to linux 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43559
Felix Fietkau [Mon, 8 Dec 2014 10:04:45 +0000 (10:04 +0000)]
x86: rename */config-3.10 to */config-default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43558
Felix Fietkau [Mon, 8 Dec 2014 10:04:39 +0000 (10:04 +0000)]
kernel: fix x86 objdump invocation on 3.14 and 3.18
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43557
John Crispin [Mon, 8 Dec 2014 06:21:32 +0000 (06:21 +0000)]
mt76: builder1 fails to build for !PCI kernels when mt76 is selected
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43556
John Crispin [Mon, 8 Dec 2014 06:15:18 +0000 (06:15 +0000)]
ar7-atm: fix various compiler errors
some headers have moved in 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43555
John Crispin [Mon, 8 Dec 2014 06:15:11 +0000 (06:15 +0000)]
acx-mac80211: v3.14 related compile fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43554
John Crispin [Mon, 8 Dec 2014 06:15:03 +0000 (06:15 +0000)]
ar7: bump to 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43553
Florian Fainelli [Sun, 7 Dec 2014 21:59:36 +0000 (21:59 +0000)]
adm8668: switch to 3.14 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43552
Florian Fainelli [Sun, 7 Dec 2014 21:59:25 +0000 (21:59 +0000)]
adm8668: add 3.14 kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43551
Florian Fainelli [Sun, 7 Dec 2014 21:58:49 +0000 (21:58 +0000)]
adm8668: rename files to files-3.3
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43550
Florian Fainelli [Sun, 7 Dec 2014 21:58:33 +0000 (21:58 +0000)]
cobalt: remove 3.3 and 3.10 kernel configuration files
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43549
Florian Fainelli [Sun, 7 Dec 2014 21:58:22 +0000 (21:58 +0000)]
cobalt: switch to 3.14 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43548
Florian Fainelli [Sun, 7 Dec 2014 21:58:12 +0000 (21:58 +0000)]
cobalt: add 3.14 kernel configuration file
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43547
Hauke Mehrtens [Sun, 7 Dec 2014 21:55:21 +0000 (21:55 +0000)]
bcm53xx: update the NAND driver
This adds some updates to the NAND driver and refreshed the config.
Most of these changes are done in preparation for mainling it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43546
Hauke Mehrtens [Sun, 7 Dec 2014 21:54:53 +0000 (21:54 +0000)]
bcm53xx: update the PCIe driver
This adds some updates to the PCIe driver and refreshed the config.
Most of these changes are done in preparation for mainling it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43545
Hauke Mehrtens [Sun, 7 Dec 2014 21:53:20 +0000 (21:53 +0000)]
kernel: update bcma and ssb to wireless-testing master-2014-12-05
This brings ssb and bcma to wireless-testing tag master-2014-12-05
In addition it also adds the ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-
axi-in-DTS-f.patch which adds the irq number in a way it is done in the
mainline kernel.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43544
John Crispin [Sun, 7 Dec 2014 16:53:37 +0000 (16:53 +0000)]
kirkwood: add a diag script
Currently only Linksys EA4500 is supported.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 43543
John Crispin [Sun, 7 Dec 2014 16:53:30 +0000 (16:53 +0000)]
packages: fix typo in OpenWrt name
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 43542
John Crispin [Sun, 7 Dec 2014 16:53:22 +0000 (16:53 +0000)]
ramips: generate factory images for Nexx devices
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 43541
John Crispin [Sun, 7 Dec 2014 16:53:15 +0000 (16:53 +0000)]
ar71xx: dev-eth: replace mdelay calls
Similar to patch 2. Replace further mdelay calls.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43540
John Crispin [Sun, 7 Dec 2014 16:53:09 +0000 (16:53 +0000)]
ag71xx: replace delay with sleep calls
I don't see that we're in an atomic context so there's no need to
busy-wait. Therefore replace the delay with sleep calls.
See also Documentation/timers/timers-howto.txt. It states:
"In general, use of mdelay is discouraged and code should
be refactored to allow for the use of msleep."
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43539
projects / openwrt / staging / noltari.git / log