drm/sun4i: backend: Support output muxing

The backend has a mux to select the destination of the data to output
to. It can select the TCON or the frontends. On the A20, it includes
an option to output to the second TCON. This is not documented in the
user manual, but the vendor kernel uses it nevertheless, so the second
backend outputs to the second TCON.

Although the muxing can be changed on the fly, DRM needs to be able to
group a bunch of layers such that they get switched to another crtc
together. This is because the display backend does the layer compositing,
while the TCON generates the display timings. This constraint is not
supported by DRM.

Here we simply pair up backends and TCONs with the same ID.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-2-wens@csie.org

drm/sun4i: tcon: Move out the tcon0 common setup

Some channel0 setup has to be done, no matter what the output interface is
(RGB, CPU, LVDS). Move that code into a common function in order to avoid
duplication.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/183100/

drm/sun4i: tcon: Don't rely on encoders to set the TCON mode

Just like we did for the TCON enable and disable, for historical reasons we
used to rely on the encoders calling the TCON mode_set function, while the
CRTC has a callback for that.

Let's implement it in order to reduce the boilerplate code.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/faa3a4d511039af1d116270dfef3a8b60ca3591e.1508231063.git-series.maxime.ripard@free-electrons.com

drm/sun4i: tcon: Don't rely on encoders to enable the TCON

So far, we've required all the TCON-connected encoders to call the TCON
enable and disable functions.

This was made this way because in the RGB/LVDS case, the TCON is the CRTC
and the encoder. However, in all the other cases (HDMI, TV, DSI, etc.), we
have another encoder down the road that needs to be programmed.

We also needed to know which channel the encoder is connected to, which is
encoder-specific.

The CRTC's enable and disable callbacks can work just fine for our use
case, and we can get the channel to use just by looking at the type of
encoder, since that is fixed. Implement those callbacks, which will
remove some of the encoder boilerplate.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/90b4396e19b3eca61b2ebfdae0672074b88ad74d.1508231063.git-series.maxime.ripard@free-electrons.com

drm/sun4i: tcon: Make tcon_get_clk_delay mode argument const

The drm_display_mode pointer can be mark const, so let's do it.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e6f92f126640aa6de639386f9b4677db3d8bb37b.1508231063.git-series.maxime.ripard@free-electrons.com

drm/sun4i: tcon: Make tcon_set_mux mode argument const

The drm_display_mode pointer can be mark const, so let's do it.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b0cce5a43fc3b56953d21a54fc3c14672f755f42.1508231063.git-series.maxime.ripard@free-electrons.com

drm/sun4i: Realign Makefile padding and reorder it

Some options were not padded as they should, and the order in the Makefile
was chaotic. Fix that.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9410b284ec97453fa692537dffaaa4fb4833347c.1508231063.git-series.maxime.ripard@free-electrons.com

drm/sun4i: Implement endpoint parsing using kfifo

The commit da82b8785eeb ("drm/sun4i: add components in breadth first
traversal order") implemented a breadth first traversal of our device tree
nodes graph. However, it was relying on the kernel linked lists, and those
are not really safe for addition.

Indeed, in a single pipeline stage, your first stage (ie, the mixer or
fronted) will be queued, and it will be the final iteration of that list as
far as list_for_each_entry_safe is concerned. Then, during that final
iteration, we'll queue another element (the TCON or the backend) that
list_for_each_entry_safe will not account for, and we will leave the loop
without having iterated over all the elements. And since we won't have
built our components list properly, the DRM driver will be left
non-functional.

We can instead use a kfifo to queue and enqueue components in-order, as was
the original intention. This also has the benefit of removing any dynamic
allocation, making the error handling path simpler too. The only thing
we're losing is the ability to tell whether an element has already been
queued, but that was only needed to remove spurious logs, and therefore
purely cosmetic.

This means that this commit effectively reverses e8afb7b67fba ("drm/sun4i:
don't add components that are already in the queue").

Fixes: da82b8785eeb ("drm/sun4i: add components in breadth first traversal order")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4ecb323e787918208f6a5d9f0ebba12c62583c98.1508231063.git-series.maxime.ripard@free-electrons.com

drm/sun4i: backend: Offset layer buffer address by DRAM starting address

The display backend, as well as other peripherals that have a DRAM
clock gate and access DRAM directly, bypassing the system bus,
address the DRAM starting from 0x0, while physical addresses the
system uses starts from 0x40000000 (or 0x20000000 in A80's case).

This issue was witnessed on the Cubietruck, which has 2GB of RAM.

Devices with less RAM function normally due to the DRAM address
wrapping around. CMA seems to always allocate its buffer at a
very high address, close to the end of DRAM.

On a 1GB RAM device, the physical address would be something like
0x78000000. The DRAM address 0x78000000 would access the same DRAM
region as 0x38000000 on a system, as the DRAM address would only
span 0x0 ~ 0x3fffffff. The bit 0x40000000 is non-functional in this
case.

However on the Cubietruck, the DRAM is 2GB. The physical address
is 0x40000000 ~ 0xbfffffff. The buffer would be something like
0xb8000000. But the DRAM address span 0x0 ~ 0x7fffffff, meaning
the buffer address wraps around to 0x38000000, which is wrong.
The correct DRAM address for it should be 0x78000000.

Correct the address configured into the backend layer registers
by PHYS_OFFSET to account for this.

Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017042349.31743-6-wens@csie.org

drm/atomic: Check for busy planes/connectors before setting the commit

We still want to fail with -EBUSY if a plane or connector is part of
a commit, even if it will be assigned to a new commit.

This closes a small hole left open where we should return -EBUSY.
It's not severe, because wait_for_dependencies and swap_state helpers
still block. But it should return -EBUSY and not stall.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.")
Link: https://patchwork.freedesktop.org/patch/msgid/20171016132928.6498-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/atomic: Make atomic helper track newly assigned planes correctly, v2.

Commit 669c9215afea ("drm/atomic: Make async plane update checks work as
intended, v2.") forced planes to always be tracked, but forgot to
explicitly get the crtc commit from the new crtc when available.

This broke plane commit tracking, and caused kms_atomic_transitions
to randomly fail with -EBUSY.

Changes since v1:
- Prefer new_crtc_state->crtc above old_crtc_state->crtc.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 669c9215afea ("drm/atomic: Make async plane update checks work as intended, v2.")
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102671
Testcase: kms_atomic_transitions
Link: https://patchwork.freedesktop.org/patch/msgid/20171017052047.8983-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/udl: Reading all edid blocks in DRM/UDL driver

Now DRM/UDL driver retreives all edid data blocks instead of only base one.
Previous approch could lead to improper initialization of video mode with
certain monitors.

Signed-off-by: Robert Tarasov <tutankhamen@chromium.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013001350.172155-2-tutankhamen@chromium.org

drm/udl: Fixed problem with UDL adpater reconnection

Fixed problem with DisplayLink and DisplayLink certified adapers in drm/udl
driver when adapter doesn't want to work if it was initialized with
disconnected DVI cable by enabling drm connectot polling and updating
current connector's state.

Signed-off-by: Robert Tarasov <tutankhamen@chromium.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013001350.172155-1-tutankhamen@chromium.org

drm/armada: Replace drm_framebuffer_reference/unreference() with _get/put()

This patch replace instances of drm_framebuffer_reference/unreference with
*_get/put() suffixes, because get/put is shorter and consistent with the
kernel use of *_get/put suffixes.
This was done with the following Coccinelle script:

@r1@
expression e;
@@

(
-drm_framebuffer_reference(e);
+drm_framebuffer_get(e);
|
-drm_framebuffer_unreference(e);
+drm_framebuffer_put(e);
)

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/e1df1b3375faa819029559b11c32e10501c5c5d6.1505932812.git.hamohammed.sa@gmail.com

drm/armada: Replace drm_gem_object_reference/unreference() with _get/put()

This patch replace instances of drm_gem_object_reference/unreference with
*_get/put() suffixes, because get/put is shorter and consistent with the
kernel use of *_get/put() suffixes.
This was done with the following Coccinelle script:

@r1@
expression e;
@@

(
-drm_gem_object_reference(e);
+drm_gem_object_get(e);
|
-drm_gem_object_unreference(e);
+drm_gem_object_put(e);
|
-drm_gem_object_unreference_unlocked(e);
+drm_gem_object_put_unlocked(e);
)

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
[resolved small conflict with removed armada_gem_dumb_map_offset]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a59ef1ed109ade897bcffcb01b33214262db8942.1505932812.git.hamohammed.sa@gmail.com

drm/gem-cma-helper: Change the level of the allocation failure message

drm_gem_cma_create() prints an error message when dma_alloc_wc() fails to
allocate the amount of memory we requested. This can lead to annoying
error messages when CMA is only one possible source of memory for the BO
allocation. Turn this error message into a debug one.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005112917.15949-1-boris.brezillon@free-electrons.com

drm/via: use ARRAY_SIZE

Using the ARRAY_SIZE macro improves the readability of the code.

Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
 (sizeof(E)@p /sizeof(*E))
|
 (sizeof(E)@p /sizeof(E[...]))
|
 (sizeof(E)@p /sizeof(T))
)

Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016023357.20174-1-jeremy.lefaure@lse.epita.fr

drm/gma500: use ARRAY_SIZE

Using the ARRAY_SIZE macro improves the readability of the code. Also,
it is useless to re-invent it.

Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
 (sizeof(E)@p /sizeof(*E))
|
 (sizeof(E)@p /sizeof(E[...]))
|
 (sizeof(E)@p /sizeof(T))
)

Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016023047.19145-1-jeremy.lefaure@lse.epita.fr

drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set function

Initially we configured the PAD_CTRL1 register at probe/bind time.
However it seems the HDMI controller will modify some of the bits
in this register by itself. On the A10 it is particularly annoying
as it toggles the output invert bits, which inverts the colors on
the display output.

The U-boot driver this driver is based on sets this register twice,
though it seems it's only needed for actual display output. Hence
we move it to the mode_set function.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-8-wens@csie.org

drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits

While debugging inverted color from the HDMI output on the A10, I
found that the lowest 3 bits were set. These were cleared on A20
boards that had normal display output. By manually toggling these
bits the mapping of the color components to these bits was found.

While these are not used anywhere, it would be nice to document
them somewhere.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-7-wens@csie.org

drm/sun4i: backend: Add comment explaining why registers are cleared

Many of the backend's layer configuration registers have undefined
default values. This poses a risk as we use regmap_update_bits in
some places, and don't overwrite the whole register.

At probe/bind time we explicitly clear all the control registers
by writing 0 to them. This patch adds a more detailed explanation
on why we're doing this.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-5-wens@csie.org

drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memory

Commit 4636ce93d5b2 ("drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()")
adds a new helper, which covers fetching a drm_framebuffer's GEM object
and calculating the buffer address for a given plane.

This patch uses this helper to replace our own open coded version of the
same function.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-4-wens@csie.org

drm/sun4i: backend: Create regmap after access is possible

The backend has various clocks and reset controls that need to be
enabled and deasserted before register access is possible.

Move the creation of the regmap to after the clocks and reset controls
have been configured where it makes more sense.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-3-wens@csie.org

drm/sun4i: don't add components that are already in the queue

Even though the components framework can handle duplicate entries,
the extra entries cause a lot more debug messages to be generated,
which would be confusing to developers not familiar with our driver
and the framework in general.

Instead, we can scan the relatively small queue and check if the
component to be added is already queued up. Since the display
pipelines are symmetrical (not considering the third display
pipeline on the A80), and we add components level by level, when
we get to the second instance at the same level, any shared downstream
components would already be in the queue.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-2-wens@csie.org

drm/vc4: Fix pitch setup for T-format scanout.

The documentation said to use src_w here, and I didn't consider that
we actually needed to be using pitch somewhere in our setup.  Fixes
scanout on my DSI panel when X11 does initial setup with 1920x1080
HDMI and 800x480 DSI both at 0,0 of the same framebuffer.

v2: Add some comments requested by Boris

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 98830d91da08 ("drm/vc4: Add T-format scanout support.")
Link: https://patchwork.freedesktop.org/patch/msgid/20170927193209.11870-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>

drm/vc4: Move the DSI clock divider workaround closer to the clock call.

We want the adjusted_mode->clock to be the actual clock we're
expecting to program, so that consumers see the right values for clock
and vrefresh.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170815234722.20700-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>

drm: Replace kzalloc with kcalloc

Prefer kcalloc over kzalloc to allocate an array.
This patch fixes checkcpatch issue.

Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013073747.29877-1-harshasharmaiitr@gmail.com
Link: https://patchwork.freedesktop.org/patch/msgid/20171013073747.29877-1-harshasharmaiitr@gmail.com

drm/tinydrm: Remove explicit .best_encoder assignment

Since the driver is relying on the atomic helpers, remove the explicit
.best_encoder assignment and let the core call
drm_atomic_helper_best_encoder().

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010205858.GA4806@Haneen

drm/tinydrm: Replace dev_error with DRM_DEV_ERROR

Convert instances of dev_error to DRM_DEV_ERROR as we have
DRM_DEV_ERROR variants of drm print macros.

Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221738.30200-1-harshasharmaiitr@gmail.com

drm/drm_of: Move drm_of_panel_bridge_remove_function into header.

Core drm shouldn't depend on anything in drm-kms-helper, or the drm
module will fail to load.

insmod drm fails with
[ 6087.674390] drm: Unknown symbol drm_panel_bridge_remove (err 0)

which is defined in drm_kms_helper.ko

This call was added by commit c70087e8f16f ("drm/drm_of: add
drm_of_panel_bridge_remove function"), and the fix is defining it in the
drm_of.h header, to break the circular dependency.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8f95e623-9480-97dc-2414-77086d8aa49d@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com> #irc
Fixes: c70087e8f16f ("drm/drm_of: add drm_of_panel_bridge_remove function")
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event()

Fix up this reference so that the proper link is generated in the
documentation and so that people don't go chasing after the wrong
function for an embarrassingly long time.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012140857.9559-1-thierry.reding@gmail.com

drm/atomic-helper: Fix typo

Fix "esay-to-use" to "easy-to-use" typo.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012140616.9002-1-thierry.reding@gmail.com

drm: Add missing __user annotation to drm_syncobj_array_find()

'user_handles' needs a __user annotation for fix the following sparse
warning:
drm_syncobj.c:813:37: warning: incorrect type in argument 2 (different address spaces)
drm_syncobj.c:813:37:    expected void const [noderef] <asn:1>*from
drm_syncobj.c:813:37:    got void *user_handles
drm_syncobj.c:875:38: warning: incorrect type in argument 2 (different address spaces)
drm_syncobj.c:875:38:    expected void *user_handles
drm_syncobj.c:875:38:    got void [noderef] <asn:1>*<noident>
drm_syncobj.c:908:38: warning: incorrect type in argument 2 (different address spaces)
drm_syncobj.c:908:38:    expected void *user_handles
drm_syncobj.c:908:38:    got void [noderef] <asn:1>*<noident>
drm_syncobj.c:941:38: warning: incorrect type in argument 2 (different address spaces)
drm_syncobj.c:941:38:    expected void *user_handles
drm_syncobj.c:941:38:    got void [noderef] <asn:1>*<noident>

Cc: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 3e6fb72d6cef ("drm/syncobj: Add a syncobj_array_find helper")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901165328.24459-2-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>

drm/rockchip: add PINCTRL dependency for LVDS

The new driver fails to build when CONFIG_PINCTRL is disabled:

drivers/gpu/drm/rockchip/rockchip_lvds.c: In function 'rockchip_lvds_grf_config':
drivers/gpu/drm/rockchip/rockchip_lvds.c:229:39: error: dereferencing pointer to incomplete type 'struct dev_pin_info'
   if (lvds->pins && !IS_ERR(lvds->pins->default_state))

This adds the respective Kconfig dependency.

Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005120957.485433-1-arnd@arndb.de

drm/kirin: Checking for IS_ERR() instead of NULL

The of_graph_get_remote_node() function doesn't return error pointers,
it returns NULL on error so I've updated the check.

Fixes: 86418f90a4c1 ("drm: convert drivers to use of_graph_get_remote_node")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005125751.jvtjms62vbtxuvak@mwanda

driver:gpu: return -ENOMEM on allocation failure.

Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1505287939-14106-3-git-send-email-allen.lkml@gmail.com

drm/vblank: Fix flip event vblank count

On machines where the vblank interrupt fires some time after the start
of vblank (or we just manage to race with the vblank interrupt handler)
we will currently stuff a stale vblank counter value into the flip event,
and thus we'll prematurely complete the flip.

Switch over to drm_crtc_accurate_vblank_count() to make sure we have an
up to date counter value, crucially also remember to add the +1 so that
the delayed vblank interrupt won't complete the flip prematurely.

Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010133322.24029-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel@ffwll.ch> #irc

drm/dp: WARN about invalid/unknown link rates and bw codes

Falling back to the lowest value is likely the only thing we can do, but
doing it silently seems like a bad thing to do. Catch it early and make
loud noises.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009092959.29021-1-jani.nikula@intel.com

Merge tag 'regmap-poll-field' of git://git./linux/kernel/git/broonie/regmap into drm-misc-next

regmap: Add field polling macro

Requested by Maxime Ripard to make sun4i compile again (next time
the other way round is better).

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004104732.jkps4ufekfizcrkz@sirena.co.uk

drm/msm/mdp5: remove less than 0 comparison for unsigned value

pipe is an unsigned int and less than zero comparison for unsigned
values is always false.

Detected using the following cocci script:

@@
unsigned int i;
@@
* i < 0

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010184207.iv3dinrtwvbv7fei@aishwarya

drm/bridge/sii8620: add remote control support

MHL specification defines Remote Control Protocol(RCP) to
send input events between MHL devices.
The driver now recognizes RCP messages and reacts to them
by reporting key events to input subsystem, allowing
a user to control a device using TV remote control.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Acked-by: Sean Young <sean@mess.org>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1503565087-19730-1-git-send-email-m.purski@samsung.com

drm/sun4i: hdmi: Add support for A31's HDMI controller

The HDMI controller found in the A31 SoCs is slightly different
from the one already supported, which is found in the A10s:

  - Need different initial values for the PLL related registers

  - Different behavior of the DDC and TMDS clocks

  - Different register layout for the DDC portion

  - Separate DDC parent clock

This patch adds support for it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-10-wens@csie.org

drm/sun4i: hdmi: Add A31 specific DDC register definitions

The DDC block for the HDMI controller is different on the A31.

This patch adds the register definitions.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-9-wens@csie.org

drm/sun4i: hdmi: Add support for controller hardware variants

The HDMI controller found in earlier Allwinner SoCs have slight
differences between the A10, A10s, and the A31:

  - Need different initial values for the PLL related registers

  - Different behavior of the DDC and TMDS clocks

  - Different register layout for the DDC portion

  - Separate DDC parent clock on the A31

  - Explicit reset control

For the A31, the HDMI TMDS clock has a different value offset for
the divider. The HDMI DDC block is different from the one in the
other SoCs. As far as the DDC clock goes, it has no pre-divider,
as it is clocked from a slower parent clock, not the TMDS clock.
The divider offset from the register value is different. And the
clock control register is at a different offset.

A new variant data structure is created to store pointers to the
above functions, structures, and the different initial values.
Another flag notates whether there is a separate DDC parent clock.
If not, the TMDS clock is passed to the DDC clock create function,
as before.

Regmap fields are used to deal with the different register layout
of the DDC block.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-8-wens@csie.org

dt-bindings: display: sun4i: Add binding for A31 HDMI controller

The HDMI controller in the A31 SoC is slightly different from the
earlier version. In addition to the TMDS clock and DDC controls,
this version now takes a second DDC clock input.

Add a compatible string for it, and add the DDC clock input to the
list of clocks required.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-7-wens@csie.org

drm/sun4i: hdmi: Allow using second PLL as TMDS clk parent

On SoCs with two display pipelines, it is possible that the two
pipelines are active at the same time, with potentially incompatible
dot clocks.

Let the HDMI encoder's TMDS clock go through all of its parents when
calculating possible clock rates. This allows usage of the second video
PLL as its parent.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-6-wens@csie.org

drm/sun4i: hdmi: create a regmap for later use

The HDMI driver is written with readl/writel I/O to the registers.
However, to support the A31 variant, which has a different layout
for the DDC registers, it was recommended to use regfields to have
a cleaner implementation. To use regfields, we need to create an
underlying regmap.

This patch only adds the regmap. It does not convert the existing
driver accesses to use regmap.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-5-wens@csie.org

drm/sun4i: hdmi: Disable clks in bind function error path and unbind function

The HDMI driver enables the bus and mod clocks in the bind function, but
does not disable them if it then bails our due to any errors. Neither
does it disable the clocks in the unbind function.

Fix this by adding a proper error path to the bind function, and
clk_disable_unprepare calls to the unbind function.

Also rename the err_cleanup_connector label to err_cleanup_encoder,
since it is the encoder that gets cleaned up.

Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-4-wens@csie.org

drm/sun4i: tcon: Add support for demuxing TCON output on A31

On systems with 2 TCONs such as the A31, it is possible to demux the
output of the TCONs to one encoder.

Add support for this for the A31.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-3-wens@csie.org

drm/sun4i: tcon: Add variant callback for TCON output muxing

Different SoCs have different muxing options and values for the TCON
outputs. Instead of stuffing every possibility in sun4i_tcon_set_mux(),
add a callback pointer to sun4i_tcon_quirks that each TCON variant
can use to provide muxing support.

The current muxing options in sun4i_tcon_set_mux() for sun5i-a13 are
moved to a new sun5i-specific callback function.

Since the new callback replaces what the .has_unknown_mux field in
tcon quirks did in the past, the field is removed.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-2-wens@csie.org

drm/bridge/synopsys: dsi :remove is_panel_bridge

When using drm_of_panel_bridge_remove() we can simplify the
code and remove is_panel_bridge from dw_mipi_dsi structure.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506936888-23844-6-git-send-email-benjamin.gaignard@linaro.org

drm/vc4: remove bridge from driver internal structure

With a call to drm_of_panel_bridge_remove() we could remove
the bridge without store it in vc4_dpi internal driver structure.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506936888-23844-5-git-send-email-benjamin.gaignard@linaro.org

drm/stm: ltdc: remove bridge from driver internal structure

With a call to drm_of_panel_bridge_remove() we could remove the bridge
without store it in ldtc internal driver structure.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506936888-23844-4-git-send-email-benjamin.gaignard@linaro.org

drm/drm_of: add drm_of_panel_bridge_remove function

This function is the pendant of drm_of_find_panel_or_bridge()
to remove a previously allocated panel_bridge.
Given a specific port and endpoint it remove the panel bridge.
Since drm_panel_bridge_remove() will check that bridge parameter
is not NULL and is a real drm_panel_bridge and no a simple bridge
it is safe to call it directly.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506936888-23844-3-git-send-email-benjamin.gaignard@linaro.org

drm/bridge: make drm_panel_bridge_remove more robust

Make sure that bridge parameter is not NULL and can be safely
cast into a panel_bridge structure.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506936755-23625-2-git-send-email-benjamin.gaignard@linaro.org

dma-fence: fix dma_fence_get_rcu_safe v2

When dma_fence_get_rcu() fails to acquire a reference it doesn't necessary
mean that there is no fence at all.

It usually mean that the fence was replaced by a new one and in this situation
we certainly want to have the new one as result and *NOT* NULL.

v2: Keep extra check after dma_fence_get_rcu().

Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505469187-3565-1-git-send-email-deathsimple@vodafone.de

dma-buf: make reservation_object_copy_fences rcu save

Stop requiring that the src reservation object is locked for this operation.

Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504551766-5093-1-git-send-email-deathsimple@vodafone.de

drm/atomic: Unref duplicated drm_atomic_state in drm_atomic_helper_resume()

Kmemleak reported memory leak after suspend and resume:
unreferenced object 0xffffffc0e31d8880 (size 128):
  comm "bash", pid 181, jiffies 4294763583 (age 24.694s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 20 a2 eb c0 ff ff ff  ......... ......
    01 00 00 00 00 00 00 00 80 87 1d e3 c0 ff ff ff  ................
  backtrace:
    [<ffffffc00034bb64>] __save_stack_trace+0x48/0x6c
    [<ffffffc00034c244>] create_object+0x138/0x254
    [<ffffffc0009dd218>] kmemleak_alloc+0x58/0x8c
    [<ffffffc000346de4>] kmem_cache_alloc_trace+0x188/0x254
    [<ffffffc0005af4c0>] drm_atomic_state_alloc+0x3c/0x88
    [<ffffffc000591f0c>] drm_atomic_helper_duplicate_state+0x28/0x158
    [<ffffffc000592098>] drm_atomic_helper_suspend+0x5c/0xf0

Problem here is that we are duplicating the drm_atomic_state in
drm_atomic_helper_suspend(), but not unreference it in the resume path.

Fixes: 1494276000db ("drm/atomic-helper: Implement subsystem-level suspend/resume")
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009064641.15174-1-jeffy.chen@rock-chips.com
Fixes: 0853695c3ba4 ("drm: Add reference counting to drm_atomic_state")
Cc: <stable@vger.kernel.org> # v4.10+

drm: adv7511/33: add HDMI CEC support

Add support for HDMI CEC to the drm adv7511/adv7533 drivers.

The CEC registers that we need to use are identical for both drivers,
but they appear at different offsets in the register map.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171007104658.14528-3-hverkuil@xs4all.nl

dt-bindings: adi,adv7511.txt: document cec clock

Document the cec clock binding.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171007104658.14528-2-hverkuil@xs4all.nl

drm/gem-fb-helper: Improve documentation

Make the docs read a little better.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506095264-41622-1-git-send-email-noralf@tronnes.org

drm/panel: Add support for the Raspberry Pi 7" Touchscreen.

This driver communicates with the Atmel microcontroller for sequencing
the poweron of the TC358762 DSI-DPI bridge and controlling the
backlight PWM.

v2: Set the same default orientation as the closed source firmware
    used, which is the best for viewing angle.
v3: Rewrite as an i2c client driver after bridge driver rejection.
v4: Finish probe without the DSI host, using the new delayed
    registration, and attach to the host during mipi_dsi_driver probe.
v5: Rework to drop the "probe without DSI host" mode again, now that
    vc4 will create the host early on.
v6: Drop unused brightness #define (noticed by Thierry)

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927193654.12609-4-eric@anholt.net
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Thierry Reding <treding@nvidia.com>

dt-bindings: Document the Raspberry Pi Touchscreen nodes.

This doesn't yet cover input, but the driver does get the display
working when the firmware is disabled from talking to our I2C lines.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927193654.12609-3-eric@anholt.net

drm/bridge: add Silicon Image SiI9234 driver

SiI9234 transmitter converts eTMDS/HDMI signal to MHL 1.0.
It is controlled via I2C bus. Its interaction with other
devices in video pipeline is performed mainly on HW level.
The only interaction it does on device driver level is
filtering-out unsupported video modes, it exposes drm_bridge
interface to perform this operation.

This patch is based on the code refactored by Tomasz Stanislawski
<t.stanislaws@samsung.com>, which was initially developed by:
Adam Hampson <ahampson@sta.samsung.com>
Erik Gilling <konkers@android.com>
Shankar Bandal <shankar.b@samsung.com>
Dharam Kumar <dharam.kr@samsung.com>

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Acked-by: Rob Herring <robh@kernel.org> [for dt bindings]
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507212431-5801-2-git-send-email-m.purski@samsung.com

drm/atomic: Make atomic iterators less surprising

Commit 669c9215afea ("drm/atomic: Make async plane update checks work as
intended, v2.") assumed incorrectly that if only 1 plane is matched in
the loop, the variables will be set to that plane. In reality we reset
them to NULL every time a new plane was iterated. This behavior is
surprising, so fix this by making the for loops only assign the
variables on a match.

When we have not added all the planes/crtc/connector to the state, and
there's a few NULL ones after the last one we iterated, te assumption
is broken that the pointers will hold the values from the last loop
iteration, which holds true for all other for_each macros we're using.
Except of course the iterator pointer itself, but that one really is
entirely internal.

Cc: Dmitry Osipenko <digetx@gmail.com>
Fixes: 669c9215afea ("drm/atomic: Make async plane update checks work as intended, v2.")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927083532.5756-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Dmitry Osipenko <digetx@gmail.com>

drm/atomic: Remove unneeded null check for private objects

It can be seen in drm_atomic_get_private_obj_state() that
ptr will never be NULL, so skip the check for that case.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927083532.5756-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge tag 'drm-misc-next-2017-10-05' of git://anongit.freedesktop.org/git/drm-misc into drm-next

More drm-misc for 4.15:

Cross-subsystem Changes:
- bunch more simple outreachy patches (Meghana Madhyastha, Aishwarya
  Pant, Haneen Mohammed)
- Quite a pile of static checker/cocci/spelling fixups all over.
- Final driver patches+core cleanup of Noralf's new drm_gem_fb_create
  helper.

Core Changes:
- legacy DPMS docs improved
- add dri-devel m-l to fbdev to catch people who try to fix
  fbcon-on-kms bugs in the wrong place

Driver Changes:
- vc4: prep for dsi panels (Eric)

* tag 'drm-misc-next-2017-10-05' of git://anongit.freedesktop.org/git/drm-misc: (34 commits)
  drm: fix typo in drm_gem_get_pages() comment
  MAINTAINERS: Add dri-devel as a mailing list for anything fbdev
  drm/virtio: Replace instances of reference/unreference with get/put
  drm/fb-cma-helper: Remove unused functions
  drm/tve200: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
  drm/sun4i: Use drm_gem_fb_create()
  drm/shmobile: Use drm_gem_fb_create()
  drm/rcar-du: Use drm_gem_fb_create()
  drm/mxsfb: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
  drm/meson: Use drm_gem_fb_create()
  drm/hisilicon/kirin: Use drm_gem_fb_create()
  drm/fsl-dcu: Use drm_gem_fb_create()
  drm/tinydrm: Use drm_gem_framebuffer_helper
  drm: of: always initialize panel in drm_of_find_panel_or_bridge()
  drm/tve200: Check for IS_ERR instead of NULL in probe
  drm/tve200: make two functions static
  drm/armada: Remove unused #include <drmP.h>
  drm/rockchip: Rely on the default best_encoder() behavior
  drm/vc4: Set up the DSI host at pdev probe time, not component bind.
  drm/vc4: Avoid using vrefresh==0 mode in DSI htotal math.
  ...

drm: fix typo in drm_gem_get_pages() comment

I spent an embarrassingly long time looking for drm_gem_init_object()
before I realized I was actually looking for drm_gem_object_init().
Fix the typo to keep other poor developers from suffering the same
fate.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1507045091-6550-1-git-send-email-jcrouse@codeaurora.org

regmap: add iopoll-like polling macro for regmap_field

This patch adds a macro regmap_field_read_poll_timeout that works
similar to the readx_poll_timeout defined in linux/iopoll.h, except
that this can also return the error value returned by a failed
regmap_field_read.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

MAINTAINERS: Add dri-devel as a mailing list for anything fbdev

fbdev is in maintenance only, except that it's still used by drm
through the drm fbdev emulation, to be able to use fbcon. And people
might want to sometimes extend fbcon to enable new features for drm
drivers, e.g. Hans' panel orientation work.

The problem is that when those patches only touch fbdev code they'll
never show up on drm developer's radar, which means we end up with
designs that don't really fit whell into the full stack. That happened
a bit with the panel orientation work, where an fbcon patch made it
into 4.14, implementing a design that won't really work on the drm
side. Which means we now have to redo things, and on top coordinate 2
subsystem trees.

Since fbdev is super low-volume we can prevent this in the future by
simply adding the dri-devel mailing list to the fbdev subsystem.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Acked-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908153528.17528-1-daniel.vetter@ffwll.ch

Merge airlied/drm-next into drm-misc-next

Just catching up with upstream.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

BackMerge tag 'v4.14-rc3' into drm-next

Linux 4.14-rc3

Requested by Daniel for the tracing build fix in fixes.

drm/virtio: Replace instances of reference/unreference with get/put

Replace reference/unreference with get/put as it is consistent
with the kernel coding style. Done using the following semantic
patch by coccinelle.

@r@
expression e;
@@

-drm_gem_object_unreference_unlocked(e);
+drm_gem_object_put_unlocked(e);

Signed-off-by: Srishti Sharma <srishtishar@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1506679419-7130-1-git-send-email-srishtishar@gmail.com

Linux 4.14-rc3

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "This contains the following fixes and improvements:

   - Avoid dereferencing an unprotected VMA pointer in the fault signal
     generation code

   - Fix inline asm call constraints for GCC 4.4

   - Use existing register variable to retrieve the stack pointer
     instead of forcing the compiler to create another indirect access
     which results in excessive extra 'mov %rsp, %<dst>' instructions

   - Disable branch profiling for the memory encryption code to prevent
     an early boot crash

   - Fix a sparse warning caused by casting the __user annotation in
     __get_user_asm_u64() away

   - Fix an off by one error in the loop termination of the error patch
     in the x86 sysfs init code

   - Add missing CPU IDs to various Intel specific drivers to enable the
     functionality on recent hardware

   - More (init) constification in the numachip code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Use register variable to get stack pointer value
  x86/mm: Disable branch profiling in mem_encrypt.c
  x86/asm: Fix inline asm call constraints for GCC 4.4
  perf/x86/intel/uncore: Correct num_boxes for IIO and IRP
  perf/x86/intel/rapl: Add missing CPU IDs
  perf/x86/msr: Add missing CPU IDs
  perf/x86/intel/cstate: Add missing CPU IDs
  x86: Don't cast away the __user in __get_user_asm_u64()
  x86/sysfs: Fix off-by-one error in loop termination
  x86/mm: Fix fault error path using unsafe vma pointer
  x86/numachip: Add const and __initconst to numachip2_clockevent

Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
 "This adds a new timer wheel function which is required for the
  conversion of the timer callback function from the 'unsigned long
  data' argument to 'struct timer_list *timer'. This conversion has two
  benefits:

   1) It makes struct timer_list smaller

   2) Many callers hand in a pointer to the timer or to the structure
      containing the timer, which happens via type casting both at setup
      and in the callback. This change gets rid of the typecasts.

  Once the conversion is complete, which is planned for 4.15, the old
  setup function and the intermediate typecast in the new setup function
  go away along with the data field in struct timer_list.

  Merging this now into mainline allows a smooth queueing of the actual
  conversion in the affected maintainer trees without creating
  dependencies"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  um/time: Fixup namespace collision
  timer: Prepare to change timer callback argument type

Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull smp/hotplug fixes from Thomas Gleixner:
 "This addresses the fallout of the new lockdep mechanism which covers
  completions in the CPU hotplug code.

  The lockdep splats are false positives, but there is no way to
  annotate that reliably. The solution is to split the completions for
  CPU up and down, which requires some reshuffling of the failure
  rollback handling as well"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp/hotplug: Hotplug state fail injection
  smp/hotplug: Differentiate the AP completion between up and down
  smp/hotplug: Differentiate the AP-work lockdep class between up and down
  smp/hotplug: Callback vs state-machine consistency
  smp/hotplug: Rewrite AP state machine core
  smp/hotplug: Allow external multi-instance rollback
  smp/hotplug: Add state diagram

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Thomas Gleixner:
 "The scheduler pull request comes with the following updates:

   - Prevent a divide by zero issue by validating the input value of
     sysctl_sched_time_avg

   - Make task state printing consistent all over the place and have
     explicit state characters for IDLE and PARKED so they wont be
     displayed as 'D' state which confuses tools"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/sysctl: Check user input value of sysctl_sched_time_avg
  sched/debug: Add explicit TASK_PARKED printing
  sched/debug: Ignore TASK_IDLE for SysRq-W
  sched/debug: Add explicit TASK_IDLE printing
  sched/tracing: Use common task-state helpers
  sched/tracing: Fix trace_sched_switch task-state printing
  sched/debug: Remove unused variable
  sched/debug: Convert TASK_state to hex
  sched/debug: Implement consistent task-state printing

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:

 - Prevent a division by zero in the perf aux buffer handling

 - Sync kernel headers with perf tool headers

 - Fix a build failure in the syscalltbl code

 - Make the debug messages of perf report --call-graph work correctly

 - Make sure that all required perf files are in the MANIFEST for
   container builds

 - Fix the atrr.exclude kernel handling so it respects the
   perf_event_paranoid and the user permissions

 - Make perf test on s390x work correctly

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/aux: Only update ->aux_wakeup in non-overwrite mode
  perf test: Fix vmlinux failure on s390x part 2
  perf test: Fix vmlinux failure on s390x
  perf tools: Fix syscalltbl build failure
  perf report: Fix debug messages with --call-graph option
  perf evsel: Fix attr.exclude_kernel setting for default cycles:p
  tools include: Sync kernel ABI headers with tooling headers
  perf tools: Get all of tools/{arch,include}/ in the MANIFEST

Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull  locking fixes from Thomas Gleixner:
 "Two fixes for locking:

   - Plug a hole the pi_stat->owner serialization which was changed
     recently and failed to fixup two usage sites.

   - Prevent reordering of the rwsem_has_spinner() check vs the
     decrement of rwsem count in up_write() which causes a missed
     wakeup"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem-xadd: Fix missed wakeup due to reordering of load
  futex: Fix pi_state->owner serialization

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:

 - Add a missing NULL pointer check in free_irq()

 - Fix a memory leak/memory corruption in the generic irq chip

 - Add missing rcu annotations for radix tree access

 - Use ffs instead of fls when extracting data from a chip register in
   the MIPS GIC irq driver

 - Fix the unmasking of IPI interrupts in the MIPS GIC driver so they
   end up at the target CPU and not at CPU0

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irq/generic-chip: Don't replace domain's name
  irqdomain: Add __rcu annotations to radix tree accessors
  irqchip/mips-gic: Use effective affinity to unmask
  irqchip/mips-gic: Fix shifts to extract register fields
  genirq: Check __free_irq() return value for NULL

Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull objtool fixes from Thomas Gleixner:
 "Two small fixes for objtool:

   - Support frame pointer setup via 'lea (%rsp), %rbp' which was not
     yet supported and caused build warnings

   - Disable unreacahble warnings for GCC4.4 and older to avoid false
     positives caused by the compiler itself"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Support unoptimized frame pointer setup
  objtool: Skip unreachable warnings for GCC 4.4 and older

drm/fb-cma-helper: Remove unused functions

The cma drivers use the drm_gem_framebuffer_helper functions now,
so remove drm_fb_cma_destroy, drm_fb_cma_create_handle,
drm_fb_cma_create_with_funcs, drm_fb_cma_create and
drm_fb_cma_prepare_fb.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-11-git-send-email-noralf@tronnes.org

drm/tve200: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()

drm_fb_cma_create() and drm_fb_cma_prepare_fb() are just wrappers now,
use drm_gem_fb_create() and drm_gem_fb_prepare_fb() directly.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-10-git-send-email-noralf@tronnes.org

drm/sun4i: Use drm_gem_fb_create()

drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-9-git-send-email-noralf@tronnes.org

drm/shmobile: Use drm_gem_fb_create()

drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-8-git-send-email-noralf@tronnes.org

drm/rcar-du: Use drm_gem_fb_create()

drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-7-git-send-email-noralf@tronnes.org

drm/mxsfb: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()

drm_fb_cma_create() and drm_fb_cma_prepare_fb() are just wrappers now,
use drm_gem_fb_create() and drm_gem_fb_prepare_fb() directly.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-6-git-send-email-noralf@tronnes.org

drm/meson: Use drm_gem_fb_create()

drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-5-git-send-email-noralf@tronnes.org

drm/hisilicon/kirin: Use drm_gem_fb_create()

drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.

Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-4-git-send-email-noralf@tronnes.org

drm/fsl-dcu: Use drm_gem_fb_create()

drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.

Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-3-git-send-email-noralf@tronnes.org

drm/tinydrm: Use drm_gem_framebuffer_helper

Use drm_gem_framebuffer_helper directly instead of the cma
library wrappers.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-2-git-send-email-noralf@tronnes.org

drm/amdgpu: use designated initialiser for thermal_irq_src.

This fixes the 0-day build warning.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: of: always initialize panel in drm_of_find_panel_or_bridge()

The callers expect "panel" to be initialized, but that isn't true if we
return -ENODEV.  It causes bugs like:

    drivers/gpu/drm/tve200/tve200_drv.c:83 tve200_modeset_init()
    error: uninitialized symbol 'panel'.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170925103038.lvr5msjvekwczctn@mwanda

drm/tve200: Check for IS_ERR instead of NULL in probe

devm_ioremap_resource() returns error pointer, it never returns NULL on
error.

Fixes: 179c02fe90a4 ("drm/tve200: Add new driver for TVE200")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170925102520.a7spymwqqbsczzz2@mwanda

drm/tve200: make two functions static

The functions tve200_display_disable and tve200_display_funcs are
local to the source and do not need to be in global scope, so make
them static.

Cleans up sparse warnings:
symbol 'tve200_display_disable' was not declared. Should it be static?
symbol 'tve200_display_funcs' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170922160516.16283-1-colin.king@canonical.com

Merge tag 'mtd/fixes-for-4.14-rc3' of git://git.infradead.org/linux-mtd

Pull mtd fixes from Boris Brezillon:

 - Fix partition alignment check in mtdcore.c

 - Fix a buffer overflow in the Atmel NAND driver

* tag 'mtd/fixes-for-4.14-rc3' of git://git.infradead.org/linux-mtd:
  mtd: nand: atmel: fix buffer overflow in atmel_pmecc_user
  mtd: Fix partition alignment check on multi-erasesize devices

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Eight mostly minor fixes for recently discovered issues in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ILLEGAL REQUEST + ASC==27 => target failure
  scsi: aacraid: Add a small delay after IOP reset
  scsi: scsi_transport_fc: Also check for NOTPRESENT in fc_remote_port_add()
  scsi: scsi_transport_fc: set scsi_target_id upon rescan
  scsi: scsi_transport_iscsi: fix the issue that iscsi_if_rx doesn't parse nlmsg properly
  scsi: aacraid: error: testing array offset 'bus' after use
  scsi: lpfc: Don't return internal MBXERR_ERROR code from probe function
  scsi: aacraid: Fix 2T+ drives on SmartIOC-2000

Merge tag 'platform-drivers-x86-v4.14-2' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform drivers fix from Darren Hart:
 "Newly discovered species of fujitsu laptops break some assumptions
  about ACPI device pairings.

  fujitsu-laptop: Don't oops when FUJ02E3 is not present"

* tag 'platform-drivers-x86-v4.14-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: fujitsu-laptop: Don't oops when FUJ02E3 is not presnt

Merge tag 'led_fixes-4.14-rc3' of git://git./linux/kernel/git/j.anaszewski/linux-leds

Pull LED fixes from Jacek Anaszewski:
 "Four fixes for the as3645a LED flash controller and one update to
  MAINTAINERS"

* tag 'led_fixes-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  MAINTAINERS: Add entry for MediaTek PMIC LED driver
  as3645a: Unregister indicator LED on device unbind
  as3645a: Use integer numbers for parsing LEDs
  dt: bindings: as3645a: Use LED number to refer to LEDs
  as3645a: Use ams,input-max-microamp as documented in DT bindings