Merge tag 'mlx5-updates-2018-05-07' of git://git./linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next

mlx5-updates-2018-05-07

mlx5 core driver misc cleanups and updates:
 - fix spelling mistake: "modfiy" -> "modify"
 - Cleanup unused field in Work Queue parameters
 - dump_command mailbox length printed
 - Refactor num of blocks in mailbox calculation
 - Decrease level of prints about non-existent MKEY
 - remove some extraneous spaces in indentations

Pulling the same update already pulled into net-next by Dave Miller.
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/{hfi1, qib, rdmavt}: Move logic to allocate receive WQE into rdmavt

Moving receive-side WQE allocation logic into rdmavt will allow
further code reuse between qib and hfi1 drivers.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/{hfi1, rdmavt, qib}: Implement CQ completion vector support

Currently the driver doesn't support completion vectors. These
are used to indicate which sets of CQs should be grouped together
into the same vector. A vector is a CQ processing thread that
runs on a specific CPU.

If an application has several CQs bound to different completion
vectors, and each completion vector runs on different CPUs, then
the completion queue workload is balanced. This helps scale as more
nodes are used.

Implement CQ completion vector support using a global workqueue
where a CQ entry is queued to the CPU corresponding to the CQ's
completion vector. Since the workqueue is global, it's guaranteed
to always be there when queueing CQ entries; Therefore, the RCU
locking for cq->rdi->worker in the hot path is superfluous.

Each completion vector is assigned to a different CPU. The number of
completion vectors available is computed by taking the number of
online, physical CPUs from the local NUMA node and subtracting the
CPUs used for kernel receive queues and the general interrupt.
Special use cases:

  * If there are no CPUs left for completion vectors, the same CPU
    for the general interrupt is used; Therefore, there would only
    be one completion vector available.

  * For multi-HFI systems, the number of completion vectors available
    for each device is the total number of completion vectors in
    the local NUMA node divided by the number of devices in the same
    NUMA node. If there's a division remainder, the first device to
    get initialized gets an extra completion vector.

Upon a CQ creation, an invalid completion vector could be specified.
Handle it as follows:

  * If the completion vector is less than 0, set it to 0.

  * Set the completion vector to the result of the passed completion
    vector moded with the number of device completion vectors
    available.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Create common functions for affinity CPU mask operations

CPU masks are used to keep track of affinity assignments for IRQs
and processes. Operations performed on these affinity CPU masks are
duplicated throughout the code.

Create common functions for affinity CPU mask operations to remove
duplicate code.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Optimize kthread pointer locking when queuing CQ entries

All threads queuing CQ entries on different CQs are unnecessarily
synchronized by a spin lock to check if the CQ kthread worker hasn't
been destroyed before queuing an CQ entry.

The lock used in 6efaf10f163d ("IB/rdmavt: Avoid queuing work into a
destroyed cq kthread worker") is a device global lock and will have
poor performance at scale as completions are entered from a large
number of CPUs.

Convert to use RCU where the read side of RCU is rvt_cq_enter() to
determine that the worker is alive prior to triggering the
completion event.
Apply write side RCU semantics in rvt_driver_cq_init() and
rvt_cq_exit().

Fixes: 6efaf10f163d ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker")
Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/Hfi1: Read CCE Revision register to verify the device is responsive

When Hfi1 device is unresponsive, reading the RcvArrayCnt register
will return all 1's. This value is then used to remap chip's RcvArray.
The incorrect all ones value used in remapping RcvArray
will cause warn on as shown by trace below:

[<ffffffff81685eac>] dump_stack+0x19/0x1b
[<ffffffff81085820>] warn_slowpath_common+0x70/0xb0
[<ffffffff810858bc>] warn_slowpath_fmt+0x5c/0x80
[<ffffffff81065c29>] __ioremap_caller+0x279/0x320
[<ffffffff8142873c>] ? _dev_info+0x6c/0x90
[<ffffffffa021d155>] ? hfi1_pcie_ddinit+0x1d5/0x330 [hfi1]
[<ffffffff81065d62>] ioremap_wc+0x32/0x40
[<ffffffffa021d155>] hfi1_pcie_ddinit+0x1d5/0x330 [hfi1]
[<ffffffffa0204851>] hfi1_init_dd+0x1d1/0x2440 [hfi1]
[<ffffffff813503dc>] ? pci_write_config_word+0x1c/0x20

Read CCE revision register first to verify that WFR device is
responsive. If the read return "all ones", bail out from init
and fail the driver load.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Rework fault injection machinery

The packet fault injection code present in the HFI1 driver had some
issues which not only fragment the code but also created user
confusion. Furthermore, it suffered from the following issues:

  1. The fault_packet method only worked for received packets. This
     meant that the only fault injection mode available for sent
     packets is fault_opcode, which did not allow for random packet
     drops on all egressing packets.
  2. The mask available for the fault_opcode mode did not really work
     due to the fact that the opcode values are not bits in a bitmask but
     rather sequential integer values. Creating a opcode/mask pair that
     would successfully capture a set of packets was nearly impossible.
  3. The code was fragmented and used too many debugfs entries to
     operate and control. This was confusing to users.
  4. It did not allow filtering fault injection on a per direction basis -
     egress vs. ingress.

In order to improve or fix the above issues, the following changes have
been made:

   1. The fault injection methods have been combined into a single fault
      injection facility. As such, the fault injection has been plugged
      into both the send and receive code paths. Regardless of method used
      the fault injection will operate on both egress and ingress packets.
   2. The type of fault injection - by packet or by opcode - is now controlled
      by changing the boolean value of the file "opcode_mode". When the value
      is set to True, fault injection is done by opcode. Otherwise, by
      packet.
   2. The masking ability has been removed in favor of a bitmap that holds
      opcodes of interest (one bit per opcode, a total of 256 bits). This
      works in tandem with the "opcode_mode" value. When the value of
      "opcode_mode" is False, this bitmap is ignored. When the value is
      True, the bitmap lists all opcodes to be considered for fault injection.
      By default, the bitmap is empty. When the user wants to filter by opcode,
      the user sets the corresponding bit in the bitmap by echo'ing the bit
      position into the 'opcodes' file. This gets around the issue that the set
      of opcodes does not lend itself to effective masks and allow for extremely
      fine-grained filtering by opcode.
   4. fault_packet and fault_opcode methods have been combined. Hence, there
      is only one debugfs directory controlling the entire operation of the
      fault injection machinery. This reduces the number of debugfs entries
      and provides a more unified user experience.
   5. A new control files - "direction" - is provided to allow the user to
      control the direction of packets, which are subject to fault injection.
   6. A new control file - "skip_usec" - is added that would allow the user
      to specify a "timeout" during which no fault injection will occur.

In addition, the following bug fixes have been applied:

   1. The fault injection code has been split into its own header and source
      files. This was done to better organize the code and support conditional
      compilation without littering the code with #ifdef's.
   2. The method by which the TX PIO packets were being marked for drop
      conflicted with the way send contexts were being setup. As a result,
      the send context was repeatedly being reset.
   3. The fault injection only makes sense when the user can control it
      through the debugfs entries. However, a kernel configuration can
      enable fault injection but keep fault injection debugfs entries
      disabled. Therefore, it makes sense that the HFI fault injection
      code depends on both.
   4. Error suppression did not take into account the method by which PIO
      packets were being dropped. Therefore, even with error suppression
      turned on, errors would still be displayed to the screen. A larger
      enough packet drop percentage would case the kernel to crash because
      the driver would be stuck printing errors.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/{hfi1, qib}: Add handling of kernel restart

A warm restart will fail to unload the driver, leaving link state
potentially flapping up to the point the BIOS resets the adapter.
Correct the issue by hooking the shutdown pci method,
which will bring port down.

Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Reorder incorrect send context disable

User send context integrity bits are cleared before the context is
disabled.  If the send context is still processing data, any packets
that need those integrity bits will cause an error and halt the send
context.

During the disable handling, the driver waits for the context to drain.
If the context is halted, the driver will eventually timeout because
the context won't drain and then incorrectly bounce the link.

Reorder the bit clearing and the context disable.

Examine the software state and send context status as well as the
egress status to determine if a send context is in the halted state.

Promote the check macros to static functions for consistency with the
new check and to follow kernel style.

Remove an unused define that refers to the egress timeout.

Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Return correct value for device state

The driver_pstate() function is used to map internal driver state
information to externally defined states.

The VERIFY_CAP and GOING_UP states are config/training states, but
the mapping routing returns the POLLING value.

Update the return values for VERIFY_CAP and GOING_UP to return the
correct value: TRAINING.

Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix fault injection init/exit issues

There are config dependent code paths that expose panics in unload
paths both in this file and in debugfs_remove_recursive() because
CONFIG_FAULT_INJECTION and CONFIG_FAULT_INJECTION_DEBUG_FS can be
set independently.

Having CONFIG_FAULT_INJECTION set and CONFIG_FAULT_INJECTION_DEBUG_FS
reset causes fault_create_debugfs_attr() to return an error.

The debugfs.c routines tolerate failures, but the module unload panics
dereferencing a NULL in the two exit routines.  If that is fixed, the
dir passed to debugfs_remove_recursive comes from a memory location
that was freed and potentially reused causing a segfault or corrupting
memory.

Here is an example of the NULL deref panic:

[66866.286829] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088
[66866.295602] IP: hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1]
[66866.301138] PGD 858496067 P4D 858496067 PUD 8433a7067 PMD 0
[66866.307452] Oops: 0000 [#1] SMP
[66866.310953] Modules linked in: hfi1(-) rdmavt rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm iw_cm ib_cm ib_core rpcsec_gss_krb5 nfsv4 dns_resolver nfsv3 nfs fscache sb_edac x86_pkg_temp_thermal intel_powerclamp vfat fat coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel iTCO_wdt iTCO_vendor_support crypto_simd mei_me glue_helper cryptd mxm_wmi ipmi_si pcspkr lpc_ich sg mei ioatdma ipmi_devintf i2c_i801 mfd_core shpchp ipmi_msghandler wmi acpi_power_meter acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt igb fb_sys_fops ttm ahci ptp crc32c_intel libahci pps_core drm dca libata i2c_algo_bit i2c_core [last unloaded: opa_vnic]
[66866.385551] CPU: 8 PID: 7470 Comm: rmmod Not tainted 4.14.0-mam-tid-rdma #2
[66866.393317] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016
[66866.405252] task: ffff88084f28c380 task.stack: ffffc90008454000
[66866.411866] RIP: 0010:hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1]
[66866.417984] RSP: 0018:ffffc90008457da0 EFLAGS: 00010202
[66866.423812] RAX: 0000000000000000 RBX: ffff880857de0000 RCX: 0000000180040001
[66866.431773] RDX: 0000000180040002 RSI: ffffea0021088200 RDI: 0000000040000000
[66866.439734] RBP: ffffc90008457da8 R08: ffff88084220e000 R09: 0000000180040001
[66866.447696] R10: 000000004220e001 R11: ffff88084220e000 R12: ffff88085a31c000
[66866.455657] R13: ffffffffa07c9820 R14: ffffffffa07c9890 R15: ffff881059d78100
[66866.463618] FS:  00007f6876047740(0000) GS:ffff88085f800000(0000) knlGS:0000000000000000
[66866.472644] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[66866.479053] CR2: 0000000000000088 CR3: 0000000856357006 CR4: 00000000001606e0
[66866.487013] Call Trace:
[66866.489747]  remove_one+0x1f/0x220 [hfi1]
[66866.494221]  pci_device_remove+0x39/0xc0
[66866.498596]  device_release_driver_internal+0x141/0x210
[66866.504424]  driver_detach+0x3f/0x80
[66866.508409]  bus_remove_driver+0x55/0xd0
[66866.512784]  driver_unregister+0x2c/0x50
[66866.517164]  pci_unregister_driver+0x2a/0xa0
[66866.521934]  hfi1_mod_cleanup+0x10/0xaa2 [hfi1]
[66866.526988]  SyS_delete_module+0x171/0x250
[66866.531558]  do_syscall_64+0x67/0x1b0
[66866.535644]  entry_SYSCALL64_slow_path+0x25/0x25
[66866.540792] RIP: 0033:0x7f6875525c27
[66866.544777] RSP: 002b:00007ffd48528e78 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[66866.553224] RAX: ffffffffffffffda RBX: 0000000001cc01d0 RCX: 00007f6875525c27
[66866.561185] RDX: 00007f6875596000 RSI: 0000000000000800 RDI: 0000000001cc0238
[66866.569146] RBP: 0000000000000000 R08: 00007f68757e9060 R09: 00007f6875596000
[66866.577120] R10: 00007ffd48528c00 R11: 0000000000000206 R12: 00007ffd48529db4
[66866.585080] R13: 0000000000000000 R14: 0000000001cc01d0 R15: 0000000001cc0010
[66866.593040] Code: 90 0f 1f 44 00 00 48 83 3d a3 8b 03 00 00 55 48 89 e5 53 48 89 fb 74 4e 48 8d bf 18 0c 00 00 e8 9d f2 ff ff 48 8b 83 20 0c 00 00 <48> 8b b8 88 00 00 00 e8 2a 21 b3 e0 48 8b bb 20 0c 00 00 e8 0e
[66866.614127] RIP: hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1] RSP: ffffc90008457da0
[66866.621885] CR2: 0000000000000088
[66866.625618] ---[ end trace c4817425783fb092 ]---

Fix by insuring that upon failure from fault_create_debugfs_attr() the
parent pointer for the routines is always set to NULL and guards added
in the exit routines to insure that debugfs_remove_recursive() is not
called when when the parent pointer is NULL.

Fixes: 0181ce31b260 ("IB/hfi1: Add receive fault injection feature")
Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Complete check for locally terminated smp

For lid routed packets 'hop_cnt' is zero, therefore current
test is incomplete. Fix it by using local mad check for
both lid routed and direct routed MADs.

Reviewed-by: Mike Mariciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Return actual error value from program_rcvarray()

A failure of program_rcvarray() is treated inconsistently by the
calling function.  In one case the error is returned, in a second
case, the error is overwritten with EFAULT.  In both cases the
code path is doing the same thing, allocating memory for groups,
so it should be consistent.

Make the error path consistent and return the error generated by
program_rcvarray().

Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Fixes: 7e7a436ecb6e ("staging/hfi1: Add TID entry program function body")
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Prevent LNI hang when LCB can't obtain lanes

When the LCB isn't able to get any lanes operational on the
first transition into mission mode, the link transfer active
never happens and the LNI stays in the polling state indefinitely.

Reset LCB upon receiving an 8051 interrupt for LCB to try to obtain
lanes with firmware version 1.25.0 or later. Also, update the LCB
reset value in other parts of the code with a macro defined to make
the code more maintainable and rename functions with the link_width
label to link_mode to reflect the fact that those functions set and
read link related data not just the link width.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Merge branch 'k.o/for-rc' into k.o/wip/dl-for-next

Several items of conflict have arisen between the RDMA stack's for-rc
branch and upcoming for-next work:

9fd4350ba895 ("IB/rxe: avoid double kfree_skb") directly conflicts with
2e47350789eb ("IB/rxe: optimize the function duplicate_request")

Patches already submitted by Intel for the hfi1 driver will fail to
apply cleanly without this merge

Other people on the mailing list have notified that their upcoming
patches also fail to apply cleanly without this merge

Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: posting klm/mtt list inline in the send queue for reg_wr

As most kernel RDMA ULPs, (e.g. NVMe over Fabrics in its default
"register_always=Y" mode) registers and invalidates user buffer
upon each IO.

Today the mlx5 driver is posting the registration work
request using scatter/gather entry for the MTT/KLM list.
The fetch of the MTT/KLM list becomes the bottleneck in
number of IO operation could be done by NVMe over Fabrics
host driver on a single adapter as shown below.

This patch is adding the support for inline registration
work request upon MTT/KLM list of size <=64B.

The result for NVMe over Fabrics is increase of > x3.5 for small
IOs as shown below, I expect other ULPs (e.g iSER, SRP, NFS over RDMA)
performance to be enhanced as well.

The following results were taken against a single NVMe-oF (RoCE link layer)
subsystem with a single namespace backed by null_blk using fio benchmark
(with rw=randread, numjobs=48, iodepth={16,64}, ioengine=libaio direct=1):

ConnectX-5 (pci Width x16)
---------------------------

Block Size       s/g reg_wr            inline reg_wr
++++++++++     +++++++++++++++        ++++++++++++++++
512B            1302.8K/34.82%         4951.9K/99.02%
1KB             1284.3K/33.86%         4232.7K/98.09%
2KB             1238.6K/34.1%          2797.5K/80.04%
4KB             1169.3K/32.46%         1941.3K/61.35%
8KB             1013.4K/30.08%         1236.6K/39.47%
16KB            695.7K/20.19%          696.9K/20.59%
32KB            350.3K/9.64%           350.6K/10.3%
64KB            175.86K/5.27%          175.9K/5.28%

ConnectX-4 (pci Width x8)
---------------------------

Block Size       s/g reg_wr            inline reg_wr
++++++++++     +++++++++++++++        ++++++++++++++++
512B            1285.8K/42.66%          4242.7K/98.18%
1KB             1254.1K/41.74%          3569.2K/96.00%
2KB             1185.9K/39.83%          2173.9K/75.58%
4KB             1069.4K/36.46%          1343.3K/47.47%
8KB             755.1K/27.77%           748.7K/29.14%

Tested-by: Nitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: Idan Burstein <idanb@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Drop local zgid in favor of core defined variable

The zgid is already provided by IB/core, so there is no need in locally
defined variable, let's drop it and reuse common one.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Reuse gid_table_release_one() in table allocation failure

_gid_table_setup_one() only performs GID table cache memory allocation,
marks entries as invalid (free) and marks the reserved entries.
At this point GID table is empty and no entries are added.

On dual port device if _gid_table_setup_one() fails to allocate the gid
table for 2nd port, there is no need to perform cleanup_gid_table_port()
to delete GID entries, as GID table is empty.
Therefore make use of existing gid_table_release_one() routine which
frees the GID table memory and avoid code duplication.

Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Make gid_table_reserve_default() return void

gid_table_reserve_default() always returns zero. Make it return void and
simplify error checking.

rdma_port is already calculated, use that while calling
gid_table_reserve_default() instead of recalculating it.

Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

net/mlx5: fix spelling mistake: "modfiy" -> "modify"

Trivial fix to spelling mistake in netdev_warn warning message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Cleanup unused field in Work Queue parameters

Remove the 'linear' field from struct mlx5_wq_param.
It is redundant, set but never read.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Fix dump_command mailbox length printed

Dump command mailbox length printed was correct only if data_only flag
was set. For the case that data_only flag was clear the offset to stop
printing at was wrong and so the buffer printed was too short.
Changed the print loop to stop according to number of buffers in
mailbox.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Refactor num of blocks in mailbox calculation

Get the logic that calculates the number of blocks in a command mailbox
into a dedicated function.

Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Decrease level of prints about non-existent MKEY

User-controlled application can cause multiple prints as below to flood
dmesg. Since knowledge of failed MKey release is important for debug,
let's decrease its level to debug.

mlx5_core 0000:00:04.0: mlx5_core_destroy_mkey:127:(pid 2352): failed
radix tree delete of mkey 0x1ed700

Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

iw_cxgb4: dump detailed driver-specific QP information

Provide a cxgb4-specific function to fill in qp state details.
This allows dumping important c4iw_qp state useful for debugging.

Included in the dump are the t4_sq, t4_rq structs, plus a dump
of the t4_swsqe and t4swrqe descriptors for the first and last
pending entries.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/nldev: helper functions to add driver attributes

These help rdma drivers to fill out the driver entries.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/nldev: add driver-specific resource tracking

Each driver can register a "fill entry" function with the restrack core.
This function will be called when filling out a resource, allowing the
driver to add driver-specific details.  The details consist of a
nltable of nested attributes, that are in the form of <key, [print-type],
value> tuples.  Both key and value attributes are mandatory.  The key
nlattr must be a string, and the value nlattr can be one of the driver
attributes that are generic, but typed, allowing the attributes to be
validated.  Currently the driver nlattr types include string, s32,
u32, s64, and u64.  The print-type nlattr allows a driver to specify
an alternative display format for user tools displaying the attribute.
For example, a u32 attribute will default to "%u", but a print-type
attribute can be included for it to be displayed in hex.  This allows
the user tool to print the number in the format desired by the driver
driver.

More attrs can be defined as they become needed by drivers.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/nldev: Add explicit pad attribute

Add a specific RDMA_NLDEV_ATTR_PAD attribute to be used for 64b
attribute padding.  To preserve the ABI, make this attribute equal to
RDMA_NLDEV_ATTR_UNSPEC, which has a value of 0, because that has been
used up until now as the pad attribute.

Change all the previous use of 0 as the pad with this
new enum.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/cma: Do not query GID during QP state transition to RTR

When commit [1] was added, SGID was queried to derive the SMAC address.
Then, later on during a refactor [2], SMAC was no longer needed. However,
the now useless GID query remained.  Then during additional code changes
later on, the GID query was being done in such a way that it caused iWARP
queries to start breaking.  Remove the useless GID query and resolve the
iWARP breakage at the same time.

This is discussed in [3].

[1] commit dd5f03beb4f7 ("IB/core: Ethernet L2 attributes in verbs/cm structures")
[2] commit 5c266b2304fb ("IB/cm: Remove the usage of smac and vid of qp_attr and cm_av")
[3] https://www.spinics.net/lists/linux-rdma/msg63951.html

Suggested-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx4: Fix integer overflow when calculating optimal MTT size

When the kernel was compiled using the UBSAN option,
we saw the following stack trace:

[ 1184.827917] UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx4/mr.c:349:27
[ 1184.828114] signed integer overflow:
[ 1184.828247] -2147483648 - 1 cannot be represented in type 'int'

The problem was caused by calling round_up in procedure
mlx4_ib_umem_calc_optimal_mtt_size (on line 349, as noted in the stack
trace) with the second parameter (1 << block_shift) (which is an int).
The second parameter should have been (1ULL << block_shift) (which
is an unsigned long long).

(1 << block_shift) is treated by the compiler as an int (because 1 is
an integer).

Now, local variable block_shift is initialized to 31.
If block_shift is 31, 1 << block_shift is 1 << 31 = 0x80000000=-214748368.
This is the most negative int value.

Inside the round_up macro, there is a cast applied to ((1 << 31) - 1).
However, this cast is applied AFTER ((1 << 31) - 1) is calculated.
Since (1 << 31) is treated as an int, we get the negative overflow
identified by UBSAN in the process of calculating ((1 << 31) - 1).

The fix is to change (1 << block_shift) to (1ULL << block_shift) on
line 349.

Fixes: 9901abf58368 ("IB/mlx4: Use optimal numbers of MTT entries")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix memory leak in exception path in get_irq_affinity()

When IRQ affinity is set and the interrupt type is unknown, a cpu
mask allocated within the function is never freed. Fix this memory
leak by allocating memory within the scope where it is used.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure

When allocating device data, if there's an allocation failure, the
already allocated memory won't be freed such as per-cpu counters.

Fix memory leaks in exception path by creating a common reentrant
clean up function hfi1_clean_devdata() to be used at driver unload
time and device data allocation failure.

To accomplish this, free_platform_config() and clean_up_i2c() are
changed to be reentrant to remove dependencies when they are called
in different order. This helps avoid NULL pointer dereferences
introduced by this patch if those two functions weren't reentrant.

In addition, set dd->int_counter, dd->rcv_limit,
dd->send_schedule and dd->tx_opstats to NULL after they're freed in
hfi1_clean_devdata(), so that hfi1_clean_devdata() is fully reentrant.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used

When an invalid num_vls is used as a module parameter, the code
execution follows an exception path where the macro dd_dev_err()
expects dd->pcidev->dev not to be NULL in hfi1_init_dd(). This
causes a NULL pointer dereference.

Fix hfi1_init_dd() by initializing dd->pcidev and dd->pcidev->dev
earlier in the code. If a dd exists, then dd->pcidev and
dd->pcidev->dev always exists.

BUG: unable to handle kernel NULL pointer dereference
at 00000000000000f0
IP: __dev_printk+0x15/0x90
Workqueue: events work_for_cpu_fn
RIP: 0010:__dev_printk+0x15/0x90
Call Trace:
 dev_err+0x6c/0x90
 ? hfi1_init_pportdata+0x38d/0x3f0 [hfi1]
 hfi1_init_dd+0xdd/0x2530 [hfi1]
 ? pci_conf1_read+0xb2/0xf0
 ? pci_read_config_word.part.9+0x64/0x80
 ? pci_conf1_write+0xb0/0xf0
 ? pcie_capability_clear_and_set_word+0x57/0x80
 init_one+0x141/0x490 [hfi1]
 local_pci_probe+0x3f/0xa0
 work_for_cpu_fn+0x10/0x20
 process_one_work+0x152/0x350
 worker_thread+0x1cf/0x3e0
 kthread+0xf5/0x130
 ? max_active_store+0x80/0x80
 ? kthread_bind+0x10/0x10
 ? do_syscall_64+0x6e/0x1a0
 ? SyS_exit_group+0x10/0x10
 ret_from_fork+0x35/0x40

Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix loss of BECN with AHG

AHG may be armed to use the stored header, which by design is limited
to edits in the PSN/A 32 bit word (bth2).

When the code is trying to send a BECN, the use of the stored header
will lose the BECN bit.

Fix by avoiding AHG when getting ready to send a BECN. This is
accomplished by always claiming the packet is not a middle packet which
is an AHG precursor.  BECNs are not a normal case and this should not
hurt AHG optimizations.

Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1 Use correct type for num_user_context

The module parameter num_user_context is defined as 'int' and
defaults to -1.  The module_param_named() says that it is uint.

Correct module_param_named() type information and update the modinfo
text to reflect the default value.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix handling of FECN marked multicast packet

The code for handling a marked UD packet unconditionally returns the
dlid in the header of the FECN marked packet.  This is not correct
for multicast packets where the DLID is in the multicast range.

The subsequent attempt to send the CNP with the multicast lid will
cause the chip to halt the ack send context because the source
lid doesn't match the chip programming.   The send context will
be halted and flush any other pending packets in the pio ring causing
the CNP to not be sent.

A part of investigating the fix, it was determined that the 16B work
broke the FECN routine badly with inconsistent use of 16 bit and 32 bits
types for lids and pkeys.  Since the port's source lid was correctly 32
bits the type mixmatches need to be dealt with at the same time as
fixing the CNP header issue.

Fix these issues by:
- Using the ports lid for as the SLID for responding to FECN marked UD
  packets
- Insure pkey is always 16 bit in this and subordinate routines
- Insure lids are 32 bits in this and subordinate routines

Cc: <stable@vger.kernel.org> # 4.14.x
Fixes: 88733e3b8450 ("IB/hfi1: Add 16B UD support")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/qedr: fix spelling mistake: "failes" -> "fails"

Trivial fix to spelling mistake in DP_ERR error message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/cxgb4: use skb_put_zero()/__skb_put_zero

Use the recently introduced helper to replace the pattern of
skb_put_zero/__skb_put() && memset().

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Use CONFIG_SECURITY_INFINIBAND to compile out security code

Make security.c depends on CONFIG_SECURITY_INFINIBAND.

Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Make ib_mad_client_id atomic

Currently, the kernel protects access to the agent ID allocator on a per
port basis using a spinlock, so it is impossible for two apps/threads on
the same port to get the same TID, but it is entirely possible for two
threads on different ports to end up with the same TID.

As this can be confusing (regardless of it being legal according to the
IB Spec 1.3, C13-18.1.1, in section 13.4.6.4 - TransactionID usage),
and as the rdma-core user space API for /dev/umad devices implies unique
TIDs even across ports, make the TID an atomic type so that no two
allocations, regardless of port number, will be the same.

Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

iw_cxgb4: Atomically flush per QP HW CQEs

When a CQ is shared by multiple QPs, c4iw_flush_hw_cq() needs to acquire
corresponding QP lock before moving the CQEs into its corresponding SW
queue and accessing the SQ contents for completing a WR.
Ignore CQEs if corresponding QP is already flushed.

Cc: stable@vger.kernel.org
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/uverbs: Fix kernel crash during MR deregistration flow

This patch fixes a crash that happens due to access to an
uninitialized DM pointer within the MR object.

The change makes sure the DM pointer in the MR object is set to
NULL during a non-DM MR creation to prevent a false indication
that this MR is related to a DM in the dereg flow.

Fixes: be934cca9e98 ("IB/uverbs: Add device memory registration ioctl support")
Reported-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/uverbs: Prevent reregistration of DM_MR to regular MR

This patch adds a check in the ib_uverbs_rereg_mr flow to make
sure there's no attempt to rereg a device memory MR to regular MR.
In such case the command will fail with -EINVAL status.

fixes: be934cca9e98 ("IB/uverbs: Add device memory registration ioctl support")
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/mlx4: Add missed RSS hash inner header flag

Despite being advertised to user space application, the RSS inner
header flag was filtered by checks at the beginning of QP creation
routine.

Cc: <stable@vger.kernel.org> # 4.15
Fixes: 4d02ebd9bbbd ("IB/mlx4: Fix RSS hash fields restrictions")
Fixes: 07d84f7b6adf ("IB/mlx4: Add support to RSS hash for inner headers")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Fix a couple misspellings

This patch fixes two spelling errors.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Submit bad wr

When generated bad work reqeust, it needs to
report to user. This patch mainly fixes it.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Update assignment method for owner field of send wqe

When posting a work reqeust, it need to update the owner bit of send
wqe. This patch mainly fix the bug when posting multiply work
request.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Adjust the order of cleanup hem table

This patch update the order of cleaning hem table for trrl_table and irrl_table
as well as mtt_cqe_table and mtt_table.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is set

Only when the IB_QP_PATH_DEST_QPN flag of attr_mask is set
is it valid to assign the dqpn field of qp context

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Remove some unnecessary attr_mask judgement

This patch deletes some unnecessary attr_mask if condition
in hip08 according to the IB protocol.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is set

Only when the IB_QP_PATH_MTU flag of attr_mask is set
it is valid to assign the mtu field of qp context when
qp type is not GSI and UD.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Fix the qp context state diagram

According to RoCE protocol, it is possible to
transition from error to error state for modifying
qp in hip08. This patch fix it.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Intercept illegal RDMA operation when use inline data

RDMA read operation is not supported inline data. If user cofigures
issue a RDMA read and use inline data, it will happen a hardware
error.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Bugfix for init hem table

During init hem table, type should be used instead of
table->type which is finally initializaed with type.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: avoid double kfree_skb

When skb is sent, it will pass the following functions in soft roce.

rxe_send [rdma_rxe]
    ip_local_out
        __ip_local_out
        ip_output
            ip_finish_output
                ip_finish_output2
                    dev_queue_xmit
                        __dev_queue_xmit
                            dev_hard_start_xmit

In the above functions, if error occurs in the above functions or
iptables rules drop skb after ip_local_out, kfree_skb will be called.
So it is not necessary to call kfree_skb in soft roce module again.
Or else crash will occur.

The steps to reproduce:

     server                       client
    ---------                    ---------
    |1.1.1.1|<----rxe-channel--->|1.1.1.2|
    ---------                    ---------

On server: rping -s -a 1.1.1.1 -v -C 10000 -S 512
On client: rping -c -a 1.1.1.1 -v -C 10000 -S 512

The kernel configs CONFIG_DEBUG_KMEMLEAK and
CONFIG_DEBUG_OBJECTS are enabled on both server and client.

When rping runs, run the following command in server:

iptables -I OUTPUT -p udp  --dport 4791 -j DROP

Without this patch, crash will occur.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: add RXE_START_MASK for rxe_opcode IB_OPCODE_RC_SEND_ONLY_INV

w/o RXE_START_MASK, the last_psn of IB_OPCODE_RC_SEND_ONLY_INV
will not be updated in update_wqe_psn, and the corresponding
wqe will not be acked in rxe_completer due to its last_psn is
zero. Finally, the other wqe will also not be able to be acked,
because the wqe of IB_OPCODE_RC_SEND_ONLY_INV with last_psn 0
is still there. This causes large amount of io timeout when
nvmeof is over rxe.

Add RXE_START_MASK for IB_OPCODE_RC_SEND_ONLY_INV to fix this.

Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/iwpm: fix memory leak on map_info

In the cases where iwpm_hash_bucket is NULL and where function
get_mapinfo_hash_bucket returns NULL then the map_info is never added
to hash_bucket_head and hence there is a leak of map_info. Fix this
by nullifying hash_bucket_head and if that is null we know that
that map_info was not added to hash_bucket_head and hence map_info
should be free'd.

Detected by CoverityScan, CID#1222481 ("Resource Leak")

Fixes: 30dc5e63d6a5 ("RDMA/core: Add support for iWARP Port Mapper user space service")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/ipoib: fix ipoib_start_xmit()'s return type

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/nes: fix nes_netdev_start_xmit()'s return type

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/cma: Fix use after destroy access to net namespace for IPoIB

There are few issues with validation of netdevice and listen id lookup
for IB (IPoIB) while processing incoming CM request as below.

1. While performing lookup of bind_list in cma_ps_find(), net namespace
of the netdevice can get deleted in cma_exit_net(), resulting in use
after free access of idr and/or net namespace structures.
This lookup occurs from the workqueue context (and not userspace
context where net namespace is always valid).

           CPU0                              CPU1
           ====                              ====

 bind_list = cma_ps_find();
                                     move netdevice to new namespace
                                     delete net namespace
                                        cma_exit_net()
                                           idr_destroy(idr);

 [..]
 cma_find_listener(bind_list, ..);

2. While netdevice is validated for IP address in given net namespace,
netdevice's net namespace and/or ifindex can change in
cma_get_net_dev() and cma_match_net_dev().

Above issues are overcome by using rcu lock along with netdevice
UP/DOWN state as described below.
When a net namespace is getting deleted, netdevice is closed and
shutdown before moving it back to init_net namespace.
change_net_namespace() synchronizes with any existing use of netdevice
before changing the netdev properties such as net or ifindex.
Once netdevice IFF_UP flags is cleared, such fields are not guaranteed
to be valid.
Therefore, rcu lock along with netdevice state check ensures that,
while route lookup and cm_id lookup is in progress, netdevice of
interest won't migrate to any other net namespace.
This ensures that associated net namespace of netdevice won't get
deleted while rcu lock is held for netdevice which is in IFF_UP state.

Fixes: fa20105e09e9 ("IB/cma: Add support for network namespaces")
Fixes: 4be74b42a6d0 ("IB/cma: Separate port allocation to network namespaces")
Fixes: f887f2ac87c2 ("IB/cma: Validate routing of incoming requests")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/uverbs: Fix validating mandatory attributes

Previously, if a method contained mandatory attributes in a namespace
that wasn't given by the user, these attributes weren't validated.
Fixing this by iterating over all specification namespaces.

Fixes: fac9658cabb9 ("IB/core: Add new ioctl interface")
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/cxgb4: release hw resources on device removal

The c4iw_rdev_close() logic was not releasing all the hw
resources (PBL and RQT memory) during the device removal
event (driver unload / system reboot). This can cause panic
in gen_pool_destroy().

The module remove function will wait for all the hw
resources to be released during the device removal event.

Fixes c12a67fe(iw_cxgb4: free EQ queue memory on last deref)
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Cc: stable@vger.kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: remove unused function variable

In the functions rxe_mem_init_dma, rxe_mem_init_user, rxe_mem_init_fast
and copy_data, the function variable rxe is not used. So this function
variable rxe is removed.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: change rxe_set_mtu function type to void

The function rxe_set_mtu always returns zero. So this function type
is changed to void.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: Change rxe_rcv to return void

It always returns 0. Change return type to void.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>

infiniband: hw: qib: Change return type to vm_fault_t

Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.

Reference id -> 1c8f422059ae ("mm: change return type to
vm_fault_t")

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

infiniband: hw: hfi1: Change return type to vm_fault_t

Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.

Reference id -> 1c8f422059ae ("mm: change return type to
vm_fault_t")

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB: make INFINIBAND_ADDR_TRANS configurable

Allow INFINIBAND without INFINIBAND_ADDR_TRANS because fuzzing has been
finding fair number of CM bugs.  So provide option to disable it.

Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

ib_srp: depend on INFINIBAND_ADDR_TRANS

INFINIBAND_SRP code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency.  This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.

Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

cifs: smbd: depend on INFINIBAND_ADDR_TRANS

CIFS_SMB_DIRECT code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency.  This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.

Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

ib_srpt: depend on INFINIBAND_ADDR_TRANS

INFINIBAND_SRPT code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency.  This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.

Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

nvmet-rdma: depend on INFINIBAND_ADDR_TRANS

NVME_TARGET_RDMA code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency.  This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.

Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

nvme: depend on INFINIBAND_ADDR_TRANS

NVME_RDMA code depends on INFINIBAND_ADDR_TRANS provided symbols.  So
declare the kconfig dependency.  This is necessary to allow for enabling
INFINIBAND without INFINIBAND_ADDR_TRANS.

Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/mlx5: Properly check return value of mlx5_get_uars_page

Starting from commit 72f36be06138 ("net/mlx5: Fix mlx5_get_uars_page to
return error code") the mlx5_get_uars_page() call returns error in case
of failure, but it was mistakenly overlooked in the merge commit.

Fixes: e7996a9a77fc ("Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git")
Reported-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Fix represent correct netdevice in dual port RoCE

In commit bcf87f1dbbec ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode")
incorrectly mapped primary device's netdevice to 2nd port netdevice.
It always represented primary port's netdevice for 2nd port netdevice
when ib representors were not used.

This results into failing to process CM request arriving on 2nd port due
to incorrect mapping of netdevice.

This fix corrects it by considering the right mdev.

Cc: <stable@vger.kernel.org> # 4.16
Fixes: bcf87f1dbbec ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Use unlimited rate when static rate is not supported

Before the change, if the user passed a static rate value different
than zero and the FW doesn't support static rate,
it would end up configuring rate of 2.5 GBps.

Fix this by using rate 0; unlimited, in cases where FW
doesn't support static rate configuration.

Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/mlx5: Protect from shift operand overflow

Ensure that user didn't supply values too large that can cause overflow.

UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23
shift exponent -2147483648 is negative
CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call
Trace:
dump_stack+0xde/0x164
ubsan_epilogue+0xe/0x81
set_rq_size+0x7c2/0xa90
create_qp_common+0xc18/0x43c0
mlx5_ib_create_qp+0x379/0x1ca0
create_qp.isra.5+0xc94/0x2260
ib_uverbs_create_qp+0x21b/0x2a0
ib_uverbs_write+0xc2c/0x1010
vfs_write+0x1b0/0x550
SyS_write+0xc7/0x1a0
do_syscall_64+0x1aa/0x740
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x433569
RSP: 002b:00007ffc6e62f448 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433569
RDX: 0000000000000070 RSI: 00000000200042c0 RDI: 0000000000000003
RBP: 00000000006d5018 R08: 00000000004002f8 R09: 00000000004002f8
R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000
R13: 000000000040c9f0 R14: 000000000040ca80 R15: 0000000000000006

Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Cc: syzkaller <syzkaller@googlegroups.com>
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flow

Failure in rereg MR releases UMEM but leaves the MR to be destroyed
by the user. As a result the following scenario may happen:
"create MR -> rereg MR with failure -> call to rereg MR again" and
hit "NULL-ptr deref or user memory access" errors.

Ensure that rereg MR is only performed on a non-dead MR.

Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 4.5
Fixes: 395a8e4c32ea ("IB/mlx5: Refactoring register MR code")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Fix deleting default GIDs when changing mac adddress

Before [1], When MAC address of the netdevice is changed, default GID is
supposed to get deleted and added back which affects the node and/or port
GUID in below sequence.

netdevice_event()
-> NETDEV_CHANGEADDR
   default_del_cmd()
      del_netdev_default_ips()
          bond_delete_netdev_default_gids()
              ib_cache_gid_set_default_gid()
                  ib_cache_gid_del()
   add_cmd()
   [..]

However, ib_cache_gid_del() was not getting invoked in non bonding
scenarios because event_ndev and rdma_ndev are same.
Therefore, fix such condition to ignore checking upper device when event
ndev and rdma_dev are same; similar to bond_set_netdev_default_gids().

Which this fix ib_cache_gid_del() is invoked correctly; however
ib_cache_gid_del() doesn't find the default GID for deletion because
find_gid() was given default_gid = false with
GID_ATTR_FIND_MASK_DEFAULT set.
But it was getting overwritten by ib_cache_gid_set_default_gid() later
on as part of add_cmd().
Therefore, mac address change used to work for default GID.

With refactor series [1], this incorrect behavior is detected.

Therefore,
when deleting default GID, set default_gid and set MASK flag.
when deleting IP based GID, clear default_gid and set MASK flag.

[1] https://patchwork.kernel.org/patch/10319151/

Fixes: 238fdf48f2b5 ("IB/core: Add RoCE table bonding support")
Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Fix to avoid deleting IPv6 look alike default GIDs

When IPv6 link local address is removed, if it matches with the default
GID, default GID(s)s gets removed which may not be a desired behavior.
This behavior is introduced by refactor work in Fixes tag.

When IPv6 link address is removed, removing its equivalent RoCEv2 GID
which exactly matches with default RoCEv2 GID, is right thing to do.
However achieving it correctly requires lot more changes, likely in
roce_gid_mgmt.c and core/cache.c. This should be done as independent
patch.

Therefore, this patch preserves behavior of not deleteing default GIDs.
This is done by providing explicit hint to consider default GID property
using mask and default_gid; similar to add_gid().

Fixes: 598ff6bae68 ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Don't allow default GID addition at non reseved slots

Default GIDs are marked reserved at the start of the GID table at index
0 and 1 by gid_table_reserve_default().  Currently when default GID is
requested, it can still allocates an empty slot which was not marked as
RESERVED for default GID, which is incorrect.

At least in current code flow of roce_gid_mgmt.c, in theory we can
still request to allocate more than one/two default GIDs depending
on how upper devices are setup.

Therefore, it is better for cache layer to only allow our reserved slots
to be used by default GID allocation requests.

Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

uapi: Fix SPDX tags for files referring to the 'OpenIB.org' license

Based on discussion with Kate Stewart this license is not a
BSD-2-Clause, but is now formally identified as Linux-OpenIB
by SPDX.

The key difference between the licenses is in the 'warranty'
paragraph.

if_infiniband.h refers to the 'OpenIB.org' license, but
does not include the text, instead it links to an obsolete
web site that contains a license that matches the BSD-2-Clause
SPX. There is no 'three clause' version of the OpenIB.org
license.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/ucma: Allow resolving address w/o specifying source address

The RDMA CM will select a source device and address by consulting
the routing table if no source address is passed into
rdma_resolve_address().  Userspace will ask for this by passing an
all-zero source address in the RESOLVE_IP command.  Unfortunately
the new check for non-zero address size rejects this with EINVAL,
which breaks valid userspace applications.

Fix this by explicitly allowing a zero address family for the source.

Fixes: 2975d5de6428 ("RDMA/ucma: Check AF family prior resolving address")
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/ucma: Check for a cm_id->device in all user calls that need it

This is done by auditing all callers of ucma_get_ctx and switching the
ones that unconditionally touch ->device to ucma_get_ctx_dev. This covers
a little less than  half of the call sites.

The 11 remaining call sites to ucma_get_ctx() were manually audited.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: replace refcount_inc with skb_get

Follow the advice from Bart, the function refcount_inc is replaced
with skb_get in commit 99dae690255e ("IB/rxe: optimize mcast recv process")
and commit 86af61764151 ("IB/rxe: remove unnecessary skb_clone").

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Suggested-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: optimize the function duplicate_request

In the function duplicate_request, the reference of skb can be increased
to replace the function skb_clone.

This will make rxe performace better and save memory.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: make rxe_release_udp_tunnel static

The function rxe_release_udp_tunnel is only used in rxe_net.c.
So it is necessary to make this function as static.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/uverbs: Add missing braces in anonymous union initializers

With gcc-4.1.2:

    drivers/infiniband/core/uverbs_std_types_flow_action.c:366: error: unknown field ‘ptr’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:367: error: unknown field ‘type’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:367: warning: missing braces around initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:367: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>.<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:368: error: unknown field ‘min_len’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: excess elements in union initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:368: error: unknown field ‘len’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: excess elements in union initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:369: error: unknown field ‘flags’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:369: warning: excess elements in union initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:369: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:376: error: unknown field ‘ptr’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:377: error: unknown field ‘type’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:377: warning: missing braces around initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:377: warning: (near initialization for ‘uverbs_flow_action_esp_replay[0].<anonymous>.<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:379: error: unknown field ‘len’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:379: warning: excess elements in union initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:379: warning: (near initialization for ‘uverbs_flow_action_esp_replay[0].<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:383: error: unknown field ‘ptr’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:384: error: unknown field ‘type’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:385: error: unknown field ‘min_len’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: excess elements in union initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:385: error: unknown field ‘len’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: excess elements in union initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:386: error: unknown field ‘flags’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:386: warning: excess elements in union initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:386: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)

Add the missing braces to fix this.

Fixes: 2eb9beaee5d7 ("IB/uverbs: Add flow_action create and destroy verbs")
Fixes: 7d12f8d5a164 ("IB/uverbs: Add modify ESP flow_action")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

infiniband: i40iw: Replace GFP_ATOMIC with GFP_KERNEL in i40iw_l2param_change

i40iw_l2param_change() is never called in atomic context.

i40iw_make_listen_node() is only set as ".l2_param_change"
in struct i40e_client_ops, and this function pointer is not called
in atomic context.

Despite never getting called from atomic context,
i40iw_l2param_change() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

infiniband: i40iw: Replace GFP_ATOMIC with GFP_KERNEL in i40iw_make_listen_node

i40iw_make_listen_node() is never called in atomic context.

i40iw_make_listen_node() is only called by i40iw_create_listen, which is
set as ".create_listen" in struct iw_cm_verbs.

Despite never getting called from atomic context,
i40iw_make_listen_node() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

infiniband: i40iw: Replace GFP_ATOMIC with GFP_KERNEL in i40iw_add_mqh_4

i40iw_add_mqh_4() is never called in atomic context, because it
calls rtnl_lock() that can sleep.

Despite never getting called from atomic context,
i40iw_add_mqh_4() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/rxe: avoid export symbols

The functions rxe_set_mtu, rxe_add and rxe_remove are only used in their
own module. So it is not necessary to export them.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/rxe: make the variable static

The variable rxe_net_notifier is only used in the file rxe_net.c. So
remove it from rxe_net.h file and make it static in the file rxe_net.c.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rdma_cm: Delete rdma_addr_client

The only thing it does is block module unload while work is posted from
rdma_resolve_ip().

However, this is not the right place to do this. The users of
rdma_resolve_ip() must ensure their own module does not unload until
rdma_resolve_ip() calls the callback, or until rdma_addr_cancel() is
called.

Similarly callers to rdma_addr_find_l2_eth_by_grh() must ensure their
module does not unload while they are calling code.

The only two users are already safe, so there is no need for this.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rdma_cm: Make rdma_addr_cancel into a fence

Currently rdma_addr_cancel does not prevent the callback from being used,
this is surprising and hard to reason about. There does not appear to be a
bug here as the only user of this API does refcount properly, fixing it
only to increase clarity.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rdma_cm: Remove process_req and timer sorting

Now that the work queue is used directly to launch and track the work
there is no need for the second processing function to do 'all list
entries'. Just schedule all entries onto the main work queue directly.

We can also drop all of the useless list sorting now, as the workqueue
sorts by expiration time automatically.

This change requires switching lock to a spinlock as netdev notifiers
are called in an atomic context, this is now easy since the lock does
not need to be held across the lookup, that is already single
threaded due to the work queue.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

infiniband: mlx5: fix build errors when INFINIBAND_USER_ACCESS=m

Fix build errors when INFINIBAND_USER_ACCESS=m and MLX5_INFINIBAND=y.
The build error occurs when the mlx5 driver code attempts to use
USER_ACCESS interfaces, which are built as a loadable module.

Fixes these build errors:

drivers/infiniband/hw/mlx5/main.o: In function `populate_specs_root':
../drivers/infiniband/hw/mlx5/main.c:4982: undefined reference to `uverbs_default_get_objects'
../drivers/infiniband/hw/mlx5/main.c:4994: undefined reference to `uverbs_alloc_spec_tree'
drivers/infiniband/hw/mlx5/main.o: In function `depopulate_specs_root':
../drivers/infiniband/hw/mlx5/main.c:5001: undefined reference to `uverbs_free_spec_tree'

Build-tested with multiple config combinations.

Fixes: 8c84660bb437 ("IB/mlx5: Initialize the parsing tree root without the help of uverbs")
Cc: stable@vger.kernel.org # reported against 4.16
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: remove duplicate header file

The header file fs_helpers.h is included twice. So it should be removed.

Fixes: 802c2125689d ("IB/mlx5: Add IPsec support for egress and ingress")
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

net/mlx5: remove some extraneous spaces in indentations

There are several lines where there is an extraneous space causing
indentation misalignment. Remove them.

Cleans up Cocconelle warnings:

./drivers/net/ethernet/mellanox/mlx5/core/qp.c:409:3-18: code aligned
with following code on line 410
./drivers/net/ethernet/mellanox/mlx5/core/qp.c:415:3-18: code aligned
with following code on line 416
./drivers/net/ethernet/mellanox/mlx5/core/qp.c:421:3-18: code aligned
with following code on line 422

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

RDMA/ucma: ucma_context reference leak in error path

Validating input parameters should be done before getting the cm_id
otherwise it can leak a cm_id reference.

Fixes: 6a21dfc0d0db ("RDMA/ucma: Limit possible option size")
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>