Michael S. Tsirkin [Thu, 19 Apr 2018 05:30:50 +0000 (08:30 +0300)]
virtio_net: sparse annotation fix
offloads is a buffer in virtio format, should use
the __virtio64 tag.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael S. Tsirkin [Thu, 19 Apr 2018 05:30:49 +0000 (08:30 +0300)]
virtio_net: fix adding vids on big-endian
Programming vids (adding or removing them) still passes
guest-endian values in the DMA buffer. That's wrong
if guest is big-endian and when virtio 1 is enabled.
Note: this is on top of a previous patch:
virtio_net: split out ctrl buffer
Fixes: 9465a7a6f ("virtio_net: enable v1.0 support")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael S. Tsirkin [Thu, 19 Apr 2018 05:30:48 +0000 (08:30 +0300)]
virtio_net: split out ctrl buffer
When sending control commands, virtio net sets up several buffers for
DMA. The buffers are all part of the net device which means it's
actually allocated by kvmalloc so it's in theory (on extreme memory
pressure) possible to get a vmalloc'ed buffer which on some platforms
means we can't DMA there.
Fix up by moving the DMA buffers into a separate structure.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dann frazier [Thu, 19 Apr 2018 03:55:41 +0000 (21:55 -0600)]
net: hns: Avoid action name truncation
When longer interface names are used, the action names exposed in
/proc/interrupts and /proc/irq/* maybe truncated. For example, when
using the predictable name algorithm in systemd on a HiSilicon D05,
I see:
ubuntu@d05-3:~$ grep enahisic2i0-tx /proc/interrupts | sed 's/.* //'
enahisic2i0-tx0
enahisic2i0-tx1
[...]
enahisic2i0-tx8
enahisic2i0-tx9
enahisic2i0-tx1
enahisic2i0-tx1
enahisic2i0-tx1
enahisic2i0-tx1
enahisic2i0-tx1
enahisic2i0-tx1
Increase the max ring name length to allow for an interface name
of IFNAMSIZE. After this change, I now see:
$ grep enahisic2i0-tx /proc/interrupts | sed 's/.* //'
enahisic2i0-tx0
enahisic2i0-tx1
enahisic2i0-tx2
[...]
enahisic2i0-tx8
enahisic2i0-tx9
enahisic2i0-tx10
enahisic2i0-tx11
enahisic2i0-tx12
enahisic2i0-tx13
enahisic2i0-tx14
enahisic2i0-tx15
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Olivier Gayot [Wed, 18 Apr 2018 20:03:06 +0000 (22:03 +0200)]
docs: ip-sysctl.txt: fix name of some ipv6 variables
The name of the following proc/sysctl entries were incorrectly
documented:
/proc/sys/net/ipv6/conf/<interface>/max_dst_opts_number
/proc/sys/net/ipv6/conf/<interface>/max_hbt_opts_number
/proc/sys/net/ipv6/conf/<interface>/max_dst_opts_length
/proc/sys/net/ipv6/conf/<interface>/max_hbt_length
Their name was set to the name of the symbol in the .data field of the
control table instead of their .proc name.
Signed-off-by: Olivier Gayot <olivier.gayot@sigexec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ronak Doshi [Wed, 18 Apr 2018 19:48:04 +0000 (12:48 -0700)]
vmxnet3: fix incorrect dereference when rxvlan is disabled
vmxnet3_get_hdr_len() is used to calculate the header length which in
turn is used to calculate the gso_size for skb. When rxvlan offload is
disabled, vlan tag is present in the header and the function references
ip header from sizeof(ethhdr) and leads to incorrect pointer reference.
This patch fixes this issue by taking sizeof(vlan_ethhdr) into account
if vlan tag is present and correctly references the ip hdr.
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Acked-by: Louis Luo <llouis@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Wed, 18 Apr 2018 18:51:56 +0000 (11:51 -0700)]
llc: hold llc_sap before release_sock()
syzbot reported we still access llc->sap in llc_backlog_rcv()
after it is freed in llc_sap_remove_socket():
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
llc_conn_ac_send_sabme_cmd_p_set_x+0x3a8/0x460 net/llc/llc_c_ac.c:785
llc_exec_conn_trans_actions net/llc/llc_conn.c:475 [inline]
llc_conn_service net/llc/llc_conn.c:400 [inline]
llc_conn_state_process+0x4e1/0x13a0 net/llc/llc_conn.c:75
llc_backlog_rcv+0x195/0x1e0 net/llc/llc_conn.c:891
sk_backlog_rcv include/net/sock.h:909 [inline]
__release_sock+0x12f/0x3a0 net/core/sock.c:2335
release_sock+0xa4/0x2b0 net/core/sock.c:2850
llc_ui_release+0xc8/0x220 net/llc/af_llc.c:204
llc->sap is refcount'ed and llc_sap_remove_socket() is paired
with llc_sap_add_socket(). This can be amended by holding its refcount
before llc_sap_remove_socket() and releasing it after release_sock().
Reported-by: <syzbot+6e181fc95081c2cf9051@syzkaller.appspotmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Corbet [Wed, 18 Apr 2018 16:14:13 +0000 (10:14 -0600)]
MAINTAINERS: Direct networking documentation changes to netdev
Networking docs changes go through the networking tree, so patch the
MAINTAINERS file to direct authors to the right place.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 18 Apr 2018 15:55:05 +0000 (16:55 +0100)]
atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit"
Trivial fix to spelling mistake in message text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pawel Dembicki [Wed, 18 Apr 2018 14:03:24 +0000 (16:03 +0200)]
net: qmi_wwan: add Wistron Neweb D19Q1
This modem is embedded on dlink dwr-960 router.
The oem configuration states:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1435 ProdID=d191 Rev=ff.ff
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=
0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
Tested on openwrt distribution
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 18 Apr 2018 11:00:08 +0000 (12:00 +0100)]
net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN"
Trivial fix to spelling mistake
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 18 Apr 2018 09:57:55 +0000 (10:57 +0100)]
net: stmmac: Disable ACS Feature for GMAC >= 4
ACS Feature is currently enabled for GMAC >= 4 but the llc_snap status
is never checked in descriptor rx_status callback. This will cause
stmmac to always strip packets even that ACS feature is already
stripping them.
Lets be safe and disable the ACS feature for GMAC >= 4 and always strip
the packets for this GMAC version.
Fixes: 477286b53f55 ("stmmac: add GMAC4 core support")
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier [Wed, 18 Apr 2018 09:14:44 +0000 (11:14 +0200)]
net: mvpp2: Fix DMA address mask size
PPv2 TX/RX descriptors uses 40bits DMA addresses, but 41 bits masks were
used (GENMASK_ULL(40, 0)).
This commit fixes that by using the correct mask.
Fixes: e7c5359f2eed ("net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sunlianwen [Wed, 18 Apr 2018 01:22:39 +0000 (09:22 +0800)]
net: change the comment of dev_mc_init
The comment of dev_mc_init() is wrong. which use dev_mc_flush
instead of dev_mc_init.
Signed-off-by: Lianwen Sun <sunlw.fnst@cn.fujitsu.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Subash Abhinov Kasiviswanathan [Tue, 17 Apr 2018 23:40:00 +0000 (17:40 -0600)]
net: qualcomm: rmnet: Fix warning seen with fill_info
When the last rmnet device attached to a real device is removed, the
real device is unregistered from rmnet. As a result, the real device
lookup fails resulting in a warning when the fill_info handler is
called as part of the rmnet device unregistration.
Fix this by returning the rmnet flags as 0 when no real device is
present.
WARNING: CPU: 0 PID: 1779 at net/core/rtnetlink.c:3254
rtmsg_ifinfo_build_skb+0xca/0x10d
Modules linked in:
CPU: 0 PID: 1779 Comm: ip Not tainted
4.16.0-11872-g7ce2367 #1
Stack:
7fe655f0 60371ea3 00000000 00000000
60282bc6 6006b116 7fe65600 60371ee8
7fe65660 6003a68c 00000000 900000000
Call Trace:
[<
6006b116>] ? printk+0x0/0x94
[<
6001f375>] show_stack+0xfe/0x158
[<
60371ea3>] ? dump_stack_print_info+0xe8/0xf1
[<
60282bc6>] ? rtmsg_ifinfo_build_skb+0xca/0x10d
[<
6006b116>] ? printk+0x0/0x94
[<
60371ee8>] dump_stack+0x2a/0x2c
[<
6003a68c>] __warn+0x10e/0x13e
[<
6003a82c>] warn_slowpath_null+0x48/0x4f
[<
60282bc6>] rtmsg_ifinfo_build_skb+0xca/0x10d
[<
60282c4d>] rtmsg_ifinfo_event.part.37+0x1e/0x43
[<
60282c2f>] ? rtmsg_ifinfo_event.part.37+0x0/0x43
[<
60282d03>] rtmsg_ifinfo+0x24/0x28
[<
60264e86>] dev_close_many+0xba/0x119
[<
60282cdf>] ? rtmsg_ifinfo+0x0/0x28
[<
6027c225>] ? rtnl_is_locked+0x0/0x1c
[<
6026ca67>] rollback_registered_many+0x1ae/0x4ae
[<
600314be>] ? unblock_signals+0x0/0xae
[<
6026cdc0>] ? unregister_netdevice_queue+0x19/0xec
[<
6026ceec>] unregister_netdevice_many+0x21/0xa1
[<
6027c765>] rtnl_delete_link+0x3e/0x4e
[<
60280ecb>] rtnl_dellink+0x262/0x29c
[<
6027c241>] ? rtnl_get_link+0x0/0x3e
[<
6027f867>] rtnetlink_rcv_msg+0x235/0x274
Fixes: be81a85f5f87 ("net: qualcomm: rmnet: Implement fill_info")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Tue, 17 Apr 2018 20:46:38 +0000 (22:46 +0200)]
tun: fix vlan packet truncation
Bogus trimming in tun_net_xmit() causes truncated vlan packets.
skb->len is correct whether or not skb_vlan_tag_present() is true. There
is no more reason to adjust the skb length on xmit in this driver than
any other driver. tun_put_user() adds 4 bytes to the total for tagged
packets because it transmits the tag inline to userspace. This is
similar to a nic transmitting the tag inline on the wire.
Reproducing the bug by sending any tagged packet through back-to-back
connected tap interfaces:
socat TUN,tun-type=tap,iff-up,tun-name=in TUN,tun-type=tap,iff-up,tun-name=out &
ip link add link in name in.20 type vlan id 20
ip addr add 10.9.9.9/24 dev in.20
ip link set in.20 up
tshark -nxxi in -f arp -c1 2>/dev/null &
tshark -nxxi out -f arp -c1 2>/dev/null &
ping -c 1 10.9.9.5 >/dev/null 2>&1
The output from the 'in' and 'out' interfaces are different when the
bug is present:
Capturing on 'in'
0000 ff ff ff ff ff ff 76 cf 76 37 d5 0a 81 00 00 14 ......v.v7......
0010 08 06 00 01 08 00 06 04 00 01 76 cf 76 37 d5 0a ..........v.v7..
0020 0a 09 09 09 00 00 00 00 00 00 0a 09 09 05 ..............
Capturing on 'out'
0000 ff ff ff ff ff ff 76 cf 76 37 d5 0a 81 00 00 14 ......v.v7......
0010 08 06 00 01 08 00 06 04 00 01 76 cf 76 37 d5 0a ..........v.v7..
0020 0a 09 09 09 00 00 00 00 00 00 ..........
Fixes: aff3d70a07ff ("tun: allow to attach ebpf socket filter")
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tung Nguyen [Tue, 17 Apr 2018 19:58:27 +0000 (21:58 +0200)]
tipc: fix infinite loop when dumping link monitor summary
When configuring the number of used bearers to MAX_BEARER and issuing
command "tipc link monitor summary", the command enters infinite loop
in user space.
This issue happens because function tipc_nl_node_dump_monitor() returns
the wrong 'prev_bearer' value when all potential monitors have been
scanned.
The correct behavior is to always try to scan all monitors until either
the netlink message is full, in which case we return the bearer identity
of the affected monitor, or we continue through the whole bearer array
until we can return MAX_BEARERS. This solution also caters for the case
where there may be gaps in the bearer array.
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Tue, 17 Apr 2018 19:25:42 +0000 (21:25 +0200)]
tipc: fix use-after-free in tipc_nametbl_stop
When we delete a service item in tipc_nametbl_stop() we loop over
all service ranges in the service's RB tree, and for each service
range we loop over its pertaining publications while calling
tipc_service_remove_publ() for each of them.
However, tipc_service_remove_publ() has the side effect that it also
removes the comprising service range item when there are no publications
left. This leads to a "use-after-free" access when the inner loop
continues to the next iteration, since the range item holding the list
we are looping no longer exists.
We fix this by moving the delete of the service range item outside
the said function. Instead, we now let the two functions calling it
test if the list is empty and perform the removal when that is the
case.
Reported-by: syzbot+d64b64afc55660106556@syzkaller.appspotmail.com
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Biggers [Tue, 17 Apr 2018 19:07:06 +0000 (12:07 -0700)]
KEYS: DNS: limit the length of option strings
Adding a dns_resolver key whose payload contains a very long option name
resulted in that string being printed in full. This hit the WARN_ONCE()
in set_precision() during the printk(), because printk() only supports a
precision of up to 32767 bytes:
precision
1000000 too large
WARNING: CPU: 0 PID: 752 at lib/vsprintf.c:2189 vsnprintf+0x4bc/0x5b0
Fix it by limiting option strings (combined name + value) to a much more
reasonable 128 bytes. The exact limit is arbitrary, but currently the
only recognized option is formatted as "dnserror=%lu" which fits well
within this limit.
Also ratelimit the printks.
Reproducer:
perl -e 'print "#", "A" x
1000000, "\x00"' | keyctl padd dns_resolver desc @s
This bug was found using syzkaller.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 4a2d789267e0 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward [Tue, 17 Apr 2018 12:32:39 +0000 (13:32 +0100)]
sfc: check RSS is active for filter insert
For some firmware variants - specifically 'capture packed stream' - RSS
filters are not valid. We must check if RSS is actually active rather
than merely enabled.
Fixes: 42356d9a137b ("sfc: support RSS spreading of ethtool ntuple filters")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Tue, 17 Apr 2018 09:46:14 +0000 (18:46 +0900)]
vlan: Fix reading memory beyond skb->tail in skb_vlan_tagged_multi
Syzkaller spotted an old bug which leads to reading skb beyond tail by 4
bytes on vlan tagged packets.
This is caused because skb_vlan_tagged_multi() did not check
skb_headlen.
BUG: KMSAN: uninit-value in eth_type_vlan include/linux/if_vlan.h:283 [inline]
BUG: KMSAN: uninit-value in skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline]
BUG: KMSAN: uninit-value in vlan_features_check include/linux/if_vlan.h:672 [inline]
BUG: KMSAN: uninit-value in dflt_features_check net/core/dev.c:2949 [inline]
BUG: KMSAN: uninit-value in netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009
CPU: 1 PID: 3582 Comm: syzkaller435149 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
eth_type_vlan include/linux/if_vlan.h:283 [inline]
skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline]
vlan_features_check include/linux/if_vlan.h:672 [inline]
dflt_features_check net/core/dev.c:2949 [inline]
netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009
validate_xmit_skb+0x89/0x1320 net/core/dev.c:3084
__dev_queue_xmit+0x1cb2/0x2b60 net/core/dev.c:3549
dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590
packet_snd net/packet/af_packet.c:2944 [inline]
packet_sendmsg+0x7c57/0x8a10 net/packet/af_packet.c:2969
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
sock_write_iter+0x3b9/0x470 net/socket.c:909
do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776
do_iter_write+0x30d/0xd40 fs/read_write.c:932
vfs_writev fs/read_write.c:977 [inline]
do_writev+0x3c9/0x830 fs/read_write.c:1012
SYSC_writev+0x9b/0xb0 fs/read_write.c:1085
SyS_writev+0x56/0x80 fs/read_write.c:1082
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43ffa9
RSP: 002b:
00007fff2cff3948 EFLAGS:
00000217 ORIG_RAX:
0000000000000014
RAX:
ffffffffffffffda RBX:
00000000004002c8 RCX:
000000000043ffa9
RDX:
0000000000000001 RSI:
0000000020000080 RDI:
0000000000000003
RBP:
00000000006cb018 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000217 R12:
00000000004018d0
R13:
0000000000401960 R14:
0000000000000000 R15:
0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2737 [inline]
__kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:984 [inline]
alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234
sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085
packet_alloc_skb net/packet/af_packet.c:2803 [inline]
packet_snd net/packet/af_packet.c:2894 [inline]
packet_sendmsg+0x6444/0x8a10 net/packet/af_packet.c:2969
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
sock_write_iter+0x3b9/0x470 net/socket.c:909
do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776
do_iter_write+0x30d/0xd40 fs/read_write.c:932
vfs_writev fs/read_write.c:977 [inline]
do_writev+0x3c9/0x830 fs/read_write.c:1012
SYSC_writev+0x9b/0xb0 fs/read_write.c:1085
SyS_writev+0x56/0x80 fs/read_write.c:1082
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes: 58e998c6d239 ("offloading: Force software GSO for multiple vlan tags.")
Reported-and-tested-by: syzbot+0bbe42c764feafa82c5a@syzkaller.appspotmail.com
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dechesne [Tue, 17 Apr 2018 12:03:26 +0000 (14:03 +0200)]
net: qrtr: add MODULE_ALIAS_NETPROTO macro
To ensure that qrtr can be loaded automatically, when needed, if it is compiled
as module.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Hajnoczi [Tue, 17 Apr 2018 06:25:58 +0000 (14:25 +0800)]
VSOCK: make af_vsock.ko removable again
Commit
c1eef220c1760762753b602c382127bfccee226d ("vsock: always call
vsock_init_tables()") introduced a module_init() function without a
corresponding module_exit() function.
Modules with an init function can only be removed if they also have an
exit function. Therefore the vsock module was considered "permanent"
and could not be removed.
This patch adds an empty module_exit() function so that "rmmod vsock"
works. No explicit cleanup is required because:
1. Transports call vsock_core_exit() upon exit and cannot be removed
while sockets are still alive.
2. vsock_diag.ko does not perform any action that requires cleanup by
vsock.ko.
Fixes: c1eef220c176 ("vsock: always call vsock_init_tables()")
Reported-by: Xiumei Mu <xmu@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Mon, 16 Apr 2018 19:32:55 +0000 (12:32 -0700)]
textsearch: fix kernel-doc warnings and add kernel-api section
Make lib/textsearch.c usable as kernel-doc.
Add textsearch() function family to kernel-api documentation.
Fix kernel-doc warnings in <linux/textsearch.h>:
../include/linux/textsearch.h:65: warning: Incorrect use of kernel-doc format:
* get_next_block - fetch next block of data
../include/linux/textsearch.h:82: warning: Incorrect use of kernel-doc format:
* finish - finalize/clean a series of get_next_block() calls
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Apr 2018 22:08:18 +0000 (18:08 -0400)]
Merge branch 'tipc-Better-check-user-provided-attributes'
Eric Dumazet says:
====================
tipc: Better check user provided attributes
syzbot reported a crash in __tipc_nl_net_set()
While fixing it, I also had to fix an old bug involving TIPC_NLA_NET_ADDR
====================
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 16 Apr 2018 15:29:43 +0000 (08:29 -0700)]
tipc: fix possible crash in __tipc_nl_net_set()
syzbot reported a crash in __tipc_nl_net_set() caused by NULL dereference.
We need to check that both TIPC_NLA_NET_NODEID and TIPC_NLA_NET_NODEID_W1
are present.
We also need to make sure userland provided u64 attributes.
Fixes: d50ccc2d3909 ("tipc: add 128-bit node identifier")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 16 Apr 2018 15:29:42 +0000 (08:29 -0700)]
tipc: add policy for TIPC_NLA_NET_ADDR
Before syzbot/KMSAN bites, add the missing policy for TIPC_NLA_NET_ADDR
Fixes: 27c21416727a ("tipc: add net set to new netlink api")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Mon, 16 Apr 2018 02:16:45 +0000 (10:16 +0800)]
net: Fix one possible memleak in ip_setup_cork
It would allocate memory in this function when the cork->opt is NULL. But
the memory isn't freed if failed in the latter rt check, and return error
directly. It causes the memleak if its caller is ip_make_skb which also
doesn't free the cork->opt when meet a error.
Now move the rt check ahead to avoid the memleak.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 16 Apr 2018 00:52:04 +0000 (17:52 -0700)]
net: af_packet: fix race in PACKET_{R|T}X_RING
In order to remove the race caught by syzbot [1], we need
to lock the socket before using po->tp_version as this could
change under us otherwise.
This means lock_sock() and release_sock() must be done by
packet_set_ring() callers.
[1] :
BUG: KMSAN: uninit-value in packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249
CPU: 0 PID: 20195 Comm: syzkaller707632 Not tainted 4.16.0+ #83
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249
packet_setsockopt+0x12c6/0x5a90 net/packet/af_packet.c:3662
SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849
SyS_setsockopt+0x76/0xa0 net/socket.c:1828
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x449099
RSP: 002b:
00007f42b5307ce8 EFLAGS:
00000246 ORIG_RAX:
0000000000000036
RAX:
ffffffffffffffda RBX:
000000000070003c RCX:
0000000000449099
RDX:
0000000000000005 RSI:
0000000000000107 RDI:
0000000000000003
RBP:
0000000000700038 R08:
000000000000001c R09:
0000000000000000
R10:
00000000200000c0 R11:
0000000000000246 R12:
0000000000000000
R13:
000000000080eecf R14:
00007f42b53089c0 R15:
0000000000000001
Local variable description: ----req_u@packet_setsockopt
Variable was created at:
packet_setsockopt+0x13f/0x5a90 net/packet/af_packet.c:3612
SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849
Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Sun, 15 Apr 2018 23:53:36 +0000 (18:53 -0500)]
ibmvnic: Clear pending interrupt after device reset
Due to a firmware bug, the hypervisor can send an interrupt to a
transmit or receive queue just prior to a partition migration, not
allowing the device enough time to handle it and send an EOI. When
the partition migrates, the interrupt is lost but an "EOI-pending"
flag for the interrupt line is still set in firmware. No further
interrupts will be sent until that flag is cleared, effectively
freezing that queue. To workaround this, the driver will disable the
hardware interrupt and send an H_EOI signal prior to re-enabling it.
This will flush the pending EOI and allow the driver to continue
operation.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Soheil Hassas Yeganeh [Sun, 15 Apr 2018 00:44:46 +0000 (20:44 -0400)]
tcp: clear tp->packets_out when purging write queue
Clear tp->packets_out when purging the write queue, otherwise
tcp_rearm_rto() mistakenly assumes TCP write queue is not empty.
This results in NULL pointer dereference.
Also, remove the redundant `tp->packets_out = 0` from
tcp_disconnect(), since tcp_disconnect() calls
tcp_write_queue_purge().
Fixes: a27fd7a8ed38 (tcp: purge write queue upon RST)
Reported-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Reported-by: Sami Farin <hvtaifwkbgefbaei@gmail.com>
Tested-by: Sami Farin <hvtaifwkbgefbaei@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 13 Apr 2018 11:59:25 +0000 (13:59 +0200)]
team: avoid adding twice the same option to the event list
When parsing the options provided by the user space,
team_nl_cmd_options_set() insert them in a temporary list to send
multiple events with a single message.
While each option's attribute is correctly validated, the code does
not check for duplicate entries before inserting into the event
list.
Exploiting the above, the syzbot was able to trigger the following
splat:
kernel BUG at lib/list_debug.c:31!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 4466 Comm: syzkaller556835 Not tainted 4.16.0+ #17
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__list_add_valid+0xaa/0xb0 lib/list_debug.c:29
RSP: 0018:
ffff8801b04bf248 EFLAGS:
00010286
RAX:
0000000000000058 RBX:
ffff8801c8fc7a90 RCX:
0000000000000000
RDX:
0000000000000058 RSI:
ffffffff815fbf41 RDI:
ffffed0036097e3f
RBP:
ffff8801b04bf260 R08:
ffff8801b0b2a700 R09:
ffffed003b604f90
R10:
ffffed003b604f90 R11:
ffff8801db027c87 R12:
ffff8801c8fc7a90
R13:
ffff8801c8fc7a90 R14:
dffffc0000000000 R15:
0000000000000000
FS:
0000000000b98880(0000) GS:
ffff8801db000000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000000000043fc30 CR3:
00000001afe8e000 CR4:
00000000001406f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
__list_add include/linux/list.h:60 [inline]
list_add include/linux/list.h:79 [inline]
team_nl_cmd_options_set+0x9ff/0x12b0 drivers/net/team/team.c:2571
genl_family_rcv_msg+0x889/0x1120 net/netlink/genetlink.c:599
genl_rcv_msg+0xc6/0x170 net/netlink/genetlink.c:624
netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2448
genl_rcv+0x28/0x40 net/netlink/genetlink.c:635
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x58b/0x740 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x9f0/0xfa0 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:639
___sys_sendmsg+0x805/0x940 net/socket.c:2117
__sys_sendmsg+0x115/0x270 net/socket.c:2155
SYSC_sendmsg net/socket.c:2164 [inline]
SyS_sendmsg+0x29/0x30 net/socket.c:2162
do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x4458b9
RSP: 002b:
00007ffd1d4a7278 EFLAGS:
00000213 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
000000000000001b RCX:
00000000004458b9
RDX:
0000000000000010 RSI:
0000000020000d00 RDI:
0000000000000004
RBP:
00000000004a74ed R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000213 R12:
00007ffd1d4a7348
R13:
0000000000402a60 R14:
0000000000000000 R15:
0000000000000000
Code: 75 e8 eb a9 48 89 f7 48 89 75 e8 e8 d1 85 7b fe 48 8b 75 e8 eb bb 48
89 f2 48 89 d9 4c 89 e6 48 c7 c7 a0 84 d8 87 e8 ea 67 28 fe <0f> 0b 0f 1f
40 00 48 b8 00 00 00 00 00 fc ff df 55 48 89 e5 41
RIP: __list_add_valid+0xaa/0xb0 lib/list_debug.c:29 RSP:
ffff8801b04bf248
This changeset addresses the avoiding list_add() if the current
option is already present in the event list.
Reported-and-tested-by: syzbot+4d4af685432dc0e56c91@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 2fcdb2c9e659 ("team: allow to send multiple set events in one message")
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier [Mon, 16 Apr 2018 08:07:23 +0000 (10:07 +0200)]
net: mvpp2: Fix TCAM filter reserved range
Marvell's PPv2 controller has a Packet Header parser, which uses a
fixed-size TCAM array of filter entries.
The mvpp2 driver reserves some ranges among the 256 TCAM entries to
perform MAC and VID filtering. The rest of the TCAM ids are freely usable
for other features, such as IPv4 proto matching.
This commit fixes the MVPP2_PE_LAST_FREE_TID define that sets the end of
the "free range", which included the MAC range. This could therefore allow
some other features to use entries dedicated to MAC filtering,
lowering the number of unicast/multicast addresses that could be allowed
before switching to promiscuous mode.
Fixes: 10fea26ce2aa ("net: mvpp2: Add support for unicast filtering")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Mon, 16 Apr 2018 10:17:50 +0000 (13:17 +0300)]
Revert "macsec: missing dev_put() on error in macsec_newlink()"
This patch is just wrong, sorry. I was trying to fix a static checker
warning and misread the code. The reference taken in macsec_newlink()
is released in macsec_free_netdev() when the netdevice is destroyed.
This reverts commit
5dcd8400884cc4a043a6d4617e042489e5d566a9.
Reported-by: Laura Abbott <labbott@redhat.com>
Fixes: 5dcd8400884c ("macsec: missing dev_put() on error in macsec_newlink()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wang Sheng-Hui [Sun, 15 Apr 2018 08:07:12 +0000 (16:07 +0800)]
filter.txt: update 'tools/net/' to 'tools/bpf/'
The tools are located at tootls/bpf/ instead of tools/net/.
Update the filter.txt doc.
Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 14 Apr 2018 19:39:53 +0000 (15:39 -0400)]
Merge branch 'sfc-ARFS-fixes'
Edward Cree says:
====================
sfc: ARFS fixes
Three issues introduced by my recent asynchronous filter handling changes:
1. The old filter_rfs_insert would replace a matching filter of equal
priority; we need to pass the appropriate argument to filter_insert to
make it do the same.
2. We're lying to the kernel with our return value from ndo_rx_flow_steer,
so we need to lie consistently when calling rps_may_expire_flow. This
is only a partial fix, as the lie still prevents us from steering
multiple flows with the same ID to different queues; a proper fix that
stops us lying at all will hopefully follow later.
3. It's possible to cause the kernel to hammer ndo_rx_flow_steer very
hard, so make sure we don't build up too huge a backlog of workitems.
Possibly it would be better to fix #3 on the kernel side; I have a patch
which I think does that but it's not a regression in 4.17 so isn't 'net'
material.
There's also the issue that we come up in the bad configuration that
triggers #3 by default, but that too is a problem for another time.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Fri, 13 Apr 2018 18:18:09 +0000 (19:18 +0100)]
sfc: limit ARFS workitems in flight per channel
A misconfigured system (e.g. with all interrupts affinitised to all CPUs)
may produce a storm of ARFS steering events. With the existing sfc ARFS
implementation, that could create a backlog of workitems that grinds the
system to a halt. To prevent this, limit the number of workitems that
may be in flight for a given SFC device to 8 (EFX_RPS_MAX_IN_FLIGHT), and
return EBUSY from our ndo_rx_flow_steer method if the limit is reached.
Given this limit, also store the workitems in an array of slots within the
struct efx_nic, rather than dynamically allocating for each request.
The limit should not negatively impact performance, because it is only
likely to be hit in cases where ARFS will be ineffective anyway.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Fri, 13 Apr 2018 18:17:49 +0000 (19:17 +0100)]
sfc: pass the correctly bogus filter_id to rps_may_expire_flow()
When we inserted an ARFS filter for ndo_rx_flow_steer(), we didn't know
what the filter ID would be, so we just returned 0. Thus, we must also
pass 0 as the filter ID when calling rps_may_expire_flow() for it, and
rely on the flow_id to identify what we're talking about.
Fixes: 3af0f34290f6 ("sfc: replace asynchronous filter operations")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Fri, 13 Apr 2018 18:17:22 +0000 (19:17 +0100)]
sfc: insert ARFS filters with replace_equal=true
Necessary to allow redirecting a flow when the application moves.
Fixes: 3af0f34290f6 ("sfc: replace asynchronous filter operations")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 13 Apr 2018 16:17:27 +0000 (12:17 -0400)]
Merge branch 'l2tp-remove-unsafe-calls-to-l2tp_tunnel_find_nth'
Guillaume Nault says:
====================
l2tp: remove unsafe calls to l2tp_tunnel_find_nth()
Using l2tp_tunnel_find_nth() is racy, because the returned tunnel can
go away as soon as this function returns. This series introduce
l2tp_tunnel_get_nth() as a safe replacement to fixes these races.
With this series, all unsafe tunnel/session lookups are finally gone.
====================
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Thu, 12 Apr 2018 18:50:35 +0000 (20:50 +0200)]
l2tp: hold reference on tunnels printed in l2tp/tunnels debugfs file
Use l2tp_tunnel_get_nth() instead of l2tp_tunnel_find_nth(), to be safe
against concurrent tunnel deletion.
Use the same mechanism as in l2tp_ppp.c for dropping the reference
taken by l2tp_tunnel_get_nth(). That is, drop the reference just
before looking up the next tunnel. In case of error, drop the last
accessed tunnel in l2tp_dfs_seq_stop().
That was the last use of l2tp_tunnel_find_nth().
Fixes: 0ad6614048cf ("l2tp: Add debugfs files for dumping l2tp debug info")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Thu, 12 Apr 2018 18:50:34 +0000 (20:50 +0200)]
l2tp: hold reference on tunnels printed in pppol2tp proc file
Use l2tp_tunnel_get_nth() instead of l2tp_tunnel_find_nth(), to be safe
against concurrent tunnel deletion.
Unlike sessions, we can't drop the reference held on tunnels in
pppol2tp_seq_show(). Tunnels are reused across several calls to
pppol2tp_seq_start() when iterating over sessions. These iterations
need the tunnel for accessing the next session. Therefore the only safe
moment for dropping the reference is just before searching for the next
tunnel.
Normally, the last invocation of pppol2tp_next_tunnel() doesn't find
any new tunnel, so it drops the last tunnel without taking any new
reference. However, in case of error, pppol2tp_seq_stop() is called
directly, so we have to drop the reference there.
Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Thu, 12 Apr 2018 18:50:33 +0000 (20:50 +0200)]
l2tp: hold reference on tunnels in netlink dumps
l2tp_tunnel_find_nth() is unsafe: no reference is held on the returned
tunnel, therefore it can be freed whenever the caller uses it.
This patch defines l2tp_tunnel_get_nth() which works similarly, but
also takes a reference on the returned tunnel. The caller then has to
drop it after it stops using the tunnel.
Convert netlink dumps to make them safe against concurrent tunnel
deletion.
Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Fri, 13 Apr 2018 06:58:25 +0000 (14:58 +0800)]
virtio-net: add missing virtqueue kick when flushing packets
We tends to batch submitting packets during XDP_TX. This requires to
kick virtqueue after a batch, we tried to do it through
xdp_do_flush_map() which only makes sense for devmap not XDP_TX. So
explicitly kick the virtqueue in this case.
Reported-by: Kimitoshi Takahashi <ktaka@nii.ac.jp>
Tested-by: Kimitoshi Takahashi <ktaka@nii.ac.jp>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 186b3c998c50 ("virtio-net: support XDP_REDIRECT")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Mon, 9 Apr 2018 07:03:14 +0000 (00:03 -0700)]
net: dsa: mv88e6xxx: Fix receive time stamp race condition.
The DSA stack passes received PTP frames to this driver via
mv88e6xxx_port_rxtstamp() for deferred delivery. The driver then
queues the frame and kicks the worker thread. The work callback reads
out the latched receive time stamp and then works through the queue,
delivering any non-matching frames without a time stamp.
If a new frame arrives after the worker thread has read out the time
stamp register but enters the queue before the worker finishes
processing the queue, that frame will be delivered without a time
stamp.
This patch fixes the race by moving the queue onto a list on the stack
before reading out the latched time stamp value.
Fixes: c6fe0ad2c3499 ("net: dsa: mv88e6xxx: add rx/tx timestamping support")
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfgang Bumiller [Thu, 12 Apr 2018 08:46:55 +0000 (10:46 +0200)]
net: fix deadlock while clearing neighbor proxy table
When coming from ndisc_netdev_event() in net/ipv6/ndisc.c,
neigh_ifdown() is called with &nd_tbl, locking this while
clearing the proxy neighbor entries when eg. deleting an
interface. Calling the table's pndisc_destructor() with the
lock still held, however, can cause a deadlock: When a
multicast listener is available an IGMP packet of type
ICMPV6_MGM_REDUCTION may be sent out. When reaching
ip6_finish_output2(), if no neighbor entry for the target
address is found, __neigh_create() is called with &nd_tbl,
which it'll want to lock.
Move the elements into their own list, then unlock the table
and perform the destruction.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199289
Fixes: 6fd6ce2056de ("ipv6: Do not depend on rt->n in ip6_finish_output2().")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Thu, 12 Apr 2018 06:24:31 +0000 (14:24 +0800)]
sctp: do not check port in sctp_inet6_cmp_addr
pf->cmp_addr() is called before binding a v6 address to the sock. It
should not check ports, like in sctp_inet_cmp_addr.
But sctp_inet6_cmp_addr checks the addr by invoking af(6)->cmp_addr,
sctp_v6_cmp_addr where it also compares the ports.
This would cause that setsockopt(SCTP_SOCKOPT_BINDX_ADD) could bind
multiple duplicated IPv6 addresses after Commit
40b4f0fd74e4 ("sctp:
lack the check for ports in sctp_v6_cmp_addr").
This patch is to remove af->cmp_addr called in sctp_inet6_cmp_addr,
but do the proper check for both v6 addrs and v4mapped addrs.
v1->v2:
- define __sctp_v6_cmp_addr to do the common address comparison
used for both pf and af v6 cmp_addr.
Fixes: 40b4f0fd74e4 ("sctp: lack the check for ports in sctp_v6_cmp_addr")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 13 Apr 2018 01:57:28 +0000 (21:57 -0400)]
Merge branch 'nfp-improve-signal-handing-on-FW-waits-and-flower-control-message-Jakub Kicinski says:
====================
nfp: improve signal handing on FW waits and flower control message processing
The first part of this set aims to improve handling of interrupted
waits. Patch 1 makes waiting for management FW responses
uninterruptible while patch 2 adds a message when signal arrives
while waiting for an NFP mutex. We can't interrupt execution of
FW commands so uninterruptible sleep seems reasonable there.
Exiting a wait for a mutex should be clean and have no side affects
so we are allowing to abort it. Note that both waits have rather
large timeouts (tens of seconds).
Patches 3 and 4 improve flower offload operation under heavy load.
Currently there is no cap on the number of queued FW notifications.
Some of the notifications have to be processed from a workqueue
which may lead to very large number of messages getting queued
if workqueue never gets a chance to run. Pieter puts a limit
on number of queued messages, tries to drop some messages we ignore
without queuing and process more important messages first.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
processing'
Pieter Jansen van Vuuren [Wed, 11 Apr 2018 23:47:38 +0000 (16:47 -0700)]
nfp: flower: split and limit cmsg skb lists
Introduce a second skb list for handling control messages and limit the
number of allowed messages. Some control messages are considered more
crucial than others, resulting in the need for a second skb list. By
splitting the list into a separate high and low priority list we can
ensure that messages on the high list get added to the head of the list
that gets processed, this however has no functional impact. Previously
there was no limit on the number of messages allowed on the queue, this
could result in the queue growing boundlessly and eventually the host
running out of memory.
Fixes: b985f870a5f0 ("nfp: process control messages in workqueue in flower app")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pieter Jansen van Vuuren [Wed, 11 Apr 2018 23:47:37 +0000 (16:47 -0700)]
nfp: flower: move route ack control messages out of the workqueue
Previously we processed the route ack control messages in the workqueue,
this unnecessarily loads the workqueue. We can deal with these messages
sooner as we know we are going to drop them.
Fixes: 8e6a9046b66a ("nfp: flower vxlan neighbour offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 11 Apr 2018 23:47:36 +0000 (16:47 -0700)]
nfp: print a message when mutex wait is interrupted
When waiting for an NFP mutex is interrupted print a message
to make root causing later error messages easier.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 11 Apr 2018 23:47:35 +0000 (16:47 -0700)]
nfp: ignore signals when communicating with management FW
We currently allow signals to interrupt the wait for management FW
commands. Exiting the wait should not cause trouble, the FW will
just finish executing the command in the background and new commands
will wait for the old one to finish.
However, this may not be what users expect (Ctrl-C not actually stopping
the command). Moreover some systems routinely request link information
with signals pending (Ubuntu 14.04 runs a landscape-sysinfo python tool
from MOTD) worrying users with errors like these:
nfp 0000:04:00.0: nfp_nsp: Error -512 waiting for code 0x0007 to start
nfp 0000:04:00.0: nfp: reading port table failed -512
Make the wait for management FW responses non-interruptible.
Fixes: 1a64821c6af7 ("nfp: add support for service processor access")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Wed, 11 Apr 2018 23:15:48 +0000 (01:15 +0200)]
tipc: fix missing initializer in tipc_sendmsg()
The stack variable 'dnode' in __tipc_sendmsg() may theoretically
end up tipc_node_get_mtu() as an unitilalized variable.
We fix this by intializing the variable at declaration. We also add
a default else clause to the two conditional ones already there, so
that we never end up in the named function if the given address
type is illegal.
Reported-by: syzbot+b0975ce9355b347c1546@syzkaller.appspotmail.com
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doron Roberts-Kedes [Wed, 11 Apr 2018 22:05:16 +0000 (15:05 -0700)]
strparser: Fix incorrect strp->need_bytes value.
strp_data_ready resets strp->need_bytes to 0 if strp_peek_len indicates
that the remainder of the message has been received. However,
do_strp_work does not reset strp->need_bytes to 0. If do_strp_work
completes a partial message, the value of strp->need_bytes will continue
to reflect the needed bytes of the previous message, causing
future invocations of strp_data_ready to return early if
strp->need_bytes is less than strp_peek_len. Resetting strp->need_bytes
to 0 in __strp_recv on handing a full message to the upper layer solves
this problem.
__strp_recv also calculates strp->need_bytes using stm->accum_len before
stm->accum_len has been incremented by cand_len. This can cause
strp->need_bytes to be equal to the full length of the message instead
of the full length minus the accumulated length. This, in turn, causes
strp_data_ready to return early, even when there is sufficient data to
complete the partial message. Incrementing stm->accum_len before using
it to calculate strp->need_bytes solves this problem.
Found while testing net/tls_sw recv path.
Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages")
Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anders Roxell [Wed, 11 Apr 2018 15:17:34 +0000 (17:17 +0200)]
selftests: net: add in_netns.sh to TEST_PROGS
Script in_netns.sh isn't installed.
--------------------
running psock_fanout test
--------------------
./run_afpackettests: line 12: ./in_netns.sh: No such file or directory
[FAIL]
--------------------
running psock_tpacket test
--------------------
./run_afpackettests: line 22: ./in_netns.sh: No such file or directory
[FAIL]
In current code added in_netns.sh to be installed.
Fixes: cc30c93fa020 ("selftests/net: ignore background traffic in psock_fanout")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 13 Apr 2018 01:51:54 +0000 (21:51 -0400)]
Merge branch 'ibmvnic-Fix-parameter-change-request-handling'
Nathan Fontenot says:
====================
ibmvnic: Fix parameter change request handling
When updating parameters for the ibmvnic driver there is a possibility
of entering an infinite loop if a return value other that a partial
success is received from sending the login CRQ.
Also, a deadlock can occur on the rtnl lock if netdev_notify_peers()
is called during driver reset for a parameter change reset.
This patch set corrects both of these issues by updating the return
code handling in ibmvnic_login() nand gaurding against calling
netdev_notify_peers() for parameter change requests.
Updates for V2: Correct spelling mistakes in commit messages.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Fontenot [Wed, 11 Apr 2018 15:09:38 +0000 (10:09 -0500)]
ibmvnic: Do not notify peers on parameter change resets
When attempting to change the driver parameters, such as the MTU
value or number of queues, do not call netdev_notify_peers().
Doing so will deadlock on the rtnl_lock.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Fontenot [Wed, 11 Apr 2018 15:09:32 +0000 (10:09 -0500)]
ibmvnic: Handle all login error conditions
There is a bug in handling the possible return codes from sending the
login CRQ. The current code treats any non-success return value,
minus failure to send the crq and a timeout waiting for a login response,
as a need to re-send the login CRQ. This can put the drive in an
infinite loop of trying to login when getting return values other
that a partial success such as a return code of aborted. For these
scenarios the login will not ever succeed at this point and the
driver would need to be reset again.
To resolve this loop trying to login is updated to only retry the
login if the driver gets a return code of a partial success. Other
return codes are treated as an error and the driver returns an error
from ibmvnic_login().
To avoid infinite looping in the partial success return cases, the
number of retries is capped at the maximum number of supported
queues. This value was chosen because the driver does a renegotiation
of capabilities which sets the number of queues possible and allows
the driver to attempt a login for possible value for the number
of queues supported.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 11 Apr 2018 21:46:00 +0000 (14:46 -0700)]
net: validate attribute sizes in neigh_dump_table()
Since neigh_dump_table() calls nlmsg_parse() without giving policy
constraints, attributes can have arbirary size that we must validate
Reported by syzbot/KMSAN :
BUG: KMSAN: uninit-value in neigh_master_filtered net/core/neighbour.c:2292 [inline]
BUG: KMSAN: uninit-value in neigh_dump_table net/core/neighbour.c:2348 [inline]
BUG: KMSAN: uninit-value in neigh_dump_info+0x1af0/0x2250 net/core/neighbour.c:2438
CPU: 1 PID: 3575 Comm: syzkaller268891 Not tainted 4.16.0+ #83
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
neigh_master_filtered net/core/neighbour.c:2292 [inline]
neigh_dump_table net/core/neighbour.c:2348 [inline]
neigh_dump_info+0x1af0/0x2250 net/core/neighbour.c:2438
netlink_dump+0x9ad/0x1540 net/netlink/af_netlink.c:2225
__netlink_dump_start+0x1167/0x12a0 net/netlink/af_netlink.c:2322
netlink_dump_start include/linux/netlink.h:214 [inline]
rtnetlink_rcv_msg+0x1435/0x1560 net/core/rtnetlink.c:4598
netlink_rcv_skb+0x355/0x5f0 net/netlink/af_netlink.c:2447
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4653
netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline]
netlink_unicast+0x1672/0x1750 net/netlink/af_netlink.c:1337
netlink_sendmsg+0x1048/0x1310 net/netlink/af_netlink.c:1900
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmsg net/socket.c:2080 [inline]
SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
SyS_sendmsg+0x54/0x80 net/socket.c:2087
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43fed9
RSP: 002b:
00007ffddbee2798 EFLAGS:
00000213 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00000000004002c8 RCX:
000000000043fed9
RDX:
0000000000000000 RSI:
0000000020005000 RDI:
0000000000000003
RBP:
00000000006ca018 R08:
00000000004002c8 R09:
00000000004002c8
R10:
00000000004002c8 R11:
0000000000000213 R12:
0000000000401800
R13:
0000000000401890 R14:
0000000000000000 R15:
0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2737 [inline]
__kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:984 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1183 [inline]
netlink_sendmsg+0x9a6/0x1310 net/netlink/af_netlink.c:1875
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmsg net/socket.c:2080 [inline]
SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
SyS_sendmsg+0x54/0x80 net/socket.c:2087
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes: 21fdd092acc7 ("net: Add support for filtering neigh dump by master device")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 11 Apr 2018 21:36:28 +0000 (14:36 -0700)]
tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets
syzbot/KMSAN reported an uninit-value in tcp_parse_options() [1]
I believe this was caused by a TCP_MD5SIG being set on live
flow.
This is highly unexpected, since TCP option space is limited.
For instance, presence of TCP MD5 option automatically disables
TCP TimeStamp option at SYN/SYNACK time, which we can not do
once flow has been established.
Really, adding/deleting an MD5 key only makes sense on sockets
in CLOSE or LISTEN state.
[1]
BUG: KMSAN: uninit-value in tcp_parse_options+0xd74/0x1a30 net/ipv4/tcp_input.c:3720
CPU: 1 PID: 6177 Comm: syzkaller192004 Not tainted 4.16.0+ #83
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
tcp_parse_options+0xd74/0x1a30 net/ipv4/tcp_input.c:3720
tcp_fast_parse_options net/ipv4/tcp_input.c:3858 [inline]
tcp_validate_incoming+0x4f1/0x2790 net/ipv4/tcp_input.c:5184
tcp_rcv_established+0xf60/0x2bb0 net/ipv4/tcp_input.c:5453
tcp_v4_do_rcv+0x6cd/0xd90 net/ipv4/tcp_ipv4.c:1469
sk_backlog_rcv include/net/sock.h:908 [inline]
__release_sock+0x2d6/0x680 net/core/sock.c:2271
release_sock+0x97/0x2a0 net/core/sock.c:2786
tcp_sendmsg+0xd6/0x100 net/ipv4/tcp.c:1464
inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
SYSC_sendto+0x6c3/0x7e0 net/socket.c:1747
SyS_sendto+0x8a/0xb0 net/socket.c:1715
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x448fe9
RSP: 002b:
00007fd472c64d38 EFLAGS:
00000216 ORIG_RAX:
000000000000002c
RAX:
ffffffffffffffda RBX:
00000000006e5a30 RCX:
0000000000448fe9
RDX:
000000000000029f RSI:
0000000020a88f88 RDI:
0000000000000004
RBP:
00000000006e5a34 R08:
0000000020e68000 R09:
0000000000000010
R10:
00000000200007fd R11:
0000000000000216 R12:
0000000000000000
R13:
00007fff074899ef R14:
00007fd472c659c0 R15:
0000000000000009
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2737 [inline]
__kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:984 [inline]
tcp_send_ack+0x18c/0x910 net/ipv4/tcp_output.c:3624
__tcp_ack_snd_check net/ipv4/tcp_input.c:5040 [inline]
tcp_ack_snd_check net/ipv4/tcp_input.c:5053 [inline]
tcp_rcv_established+0x2103/0x2bb0 net/ipv4/tcp_input.c:5469
tcp_v4_do_rcv+0x6cd/0xd90 net/ipv4/tcp_ipv4.c:1469
sk_backlog_rcv include/net/sock.h:908 [inline]
__release_sock+0x2d6/0x680 net/core/sock.c:2271
release_sock+0x97/0x2a0 net/core/sock.c:2786
tcp_sendmsg+0xd6/0x100 net/ipv4/tcp.c:1464
inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
SYSC_sendto+0x6c3/0x7e0 net/socket.c:1747
SyS_sendto+0x8a/0xb0 net/socket.c:1715
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Wed, 11 Apr 2018 20:52:09 +0000 (22:52 +0200)]
tipc: fix unbalanced reference counter
When a topology subscription is created, we may encounter (or KASAN
may provoke) a failure to create a corresponding service instance in
the binding table. Instead of letting the tipc_nametbl_subscribe()
report the failure back to the caller, the function just makes a warning
printout and returns, without incrementing the subscription reference
counter as expected by the caller.
This makes the caller believe that the subscription was successful, so
it will at a later moment try to unsubscribe the item. This involves
a sub_put() call. Since the reference counter never was incremented
in the first place, we get a premature delete of the subscription item,
followed by a "use-after-free" warning.
We fix this by adding a return value to tipc_nametbl_subscribe() and
make the caller aware of the failure to subscribe.
This bug seems to always have been around, but this fix only applies
back to the commit shown below. Given the low risk of this happening
we believe this to be sufficient.
Fixes: commit 218527fe27ad ("tipc: replace name table service range
array with rb tree")
Reported-by: syzbot+aa245f26d42b8305d157@syzkaller.appspotmail.com
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raghuram Chary J [Wed, 11 Apr 2018 15:06:36 +0000 (20:36 +0530)]
lan78xx: PHY DSP registers initialization to address EEE link drop issues with long cables
The patch is to configure DSP registers of PHY device
to handle Gbe-EEE failures with >40m cable length.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Laura Abbott [Wed, 11 Apr 2018 01:04:29 +0000 (18:04 -0700)]
mISDN: Remove VLAs
There's an ongoing effort to remove VLAs[1] from the kernel to eventually
turn on -Wvla. Remove the VLAs from the mISDN code by switching to using
kstrdup in one place and using an upper bound in another.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Wed, 11 Apr 2018 00:52:34 +0000 (17:52 -0700)]
net/tls: Remove VLA usage
In the quest to remove VLAs from the kernel[1], this replaces the VLA
size with the only possible size used in the code, and adds a mechanism
to double-check future IV sizes.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Tue, 10 Apr 2018 22:26:43 +0000 (15:26 -0700)]
ibmvnic: Define vnic_login_client_data name field as unsized array
The "name" field of struct vnic_login_client_data is a char array of
undefined length. This should be written as "char name[]" so the compiler
can make better decisions about the field (for example, not assuming
it's a single character). This was noticed while trying to tighten the
CONFIG_FORTIFY_SOURCE checking.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 12 Apr 2018 18:09:05 +0000 (11:09 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) In ip_gre tunnel, handle the conflict between TUNNEL_{SEQ,CSUM} and
GSO/LLTX properly. From Sabrina Dubroca.
2) Stop properly on error in lan78xx_read_otp(), from Phil Elwell.
3) Don't uncompress in slip before rstate is initialized, from Tejaswi
Tanikella.
4) When using 1.x firmware on aquantia, issue a deinit before we
hardware reset the chip, otherwise we break dirty wake WOL. From
Igor Russkikh.
5) Correct log check in vhost_vq_access_ok(), from Stefan Hajnoczi.
6) Fix ethtool -x crashes in bnxt_en, from Michael Chan.
7) Fix races in l2tp tunnel creation and duplicate tunnel detection,
from Guillaume Nault.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
l2tp: fix race in duplicate tunnel detection
l2tp: fix races in tunnel creation
tun: send netlink notification when the device is modified
tun: set the flags before registering the netdevice
lan78xx: Don't reset the interface on open
bnxt_en: Fix NULL pointer dereference at bnxt_free_irq().
bnxt_en: Need to include RDMA rings in bnxt_check_rings().
bnxt_en: Support max-mtu with VF-reps
bnxt_en: Ignore src port field in decap filter nodes
bnxt_en: do not allow wildcard matches for L2 flows
bnxt_en: Fix ethtool -x crash when device is down.
vhost: return bool from *_access_ok() functions
vhost: fix vhost_vq_access_ok() log check
vhost: Fix vhost_copy_to_user()
net: aquantia: oops when shutdown on already stopped device
net: aquantia: Regression on reset with 1.x firmware
cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN
slip: Check if rstate is initialized before uncompressing
lan78xx: Avoid spurious kevent 4 "error"
lan78xx: Correctly indicate invalid OTP
...
Linus Torvalds [Thu, 12 Apr 2018 18:04:35 +0000 (11:04 -0700)]
Merge tag 'for-linus-4.17-rc1-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A few fixes of Xen related core code and drivers"
* tag 'for-linus-4.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvh: Indicate XENFEAT_linux_rsdp_unrestricted to Xen
xen/acpi: off by one in read_acpi_id()
xen/acpi: upload _PSD info for non Dom0 CPUs too
x86/xen: Delay get_cpu_cap until stack canary is established
xen: xenbus_dev_frontend: Verify body of XS_TRANSACTION_END
xen: xenbus: Catch closing of non existent transactions
xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handling
Linus Torvalds [Thu, 12 Apr 2018 18:00:48 +0000 (11:00 -0700)]
Merge tag 'dma-mapping-4.17-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
"Fix for one swiotlb regression in 2.16 from Takashi"
* tag 'dma-mapping-4.17-2' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix unexpected swiotlb_alloc_coherent failures
Linus Torvalds [Thu, 12 Apr 2018 17:59:03 +0000 (10:59 -0700)]
Merge tag 'mmc-v4.17-2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Prevent bus reference leak in mmc_blk_init()
MMC host:
- tmio: Fix error handling when issuing CMD23
- jz4740: Fix race condition in IRQ mask update"
* tag 'mmc-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: tmio: Fix error handling when issuing CMD23
mmc: core: Prevent bus reference leak in mmc_blk_init()
mmc: jz4740: Fix race condition in IRQ mask update
Linus Torvalds [Thu, 12 Apr 2018 17:21:19 +0000 (10:21 -0700)]
Merge tag 'for_linus-4.16' of git://git./linux/kernel/git/jwessel/kgdb
Pull kdb updates from Jason Wessel:
- fix 2032 time access issues and new compiler warnings
- minor regression test cleanup
- formatting fixes for end user use of kdb
* tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
kdb: use memmove instead of overlapping memcpy
kdb: use ktime_get_mono_fast_ns() instead of ktime_get_ts()
kdb: bl: don't use tab character in output
kdb: drop newline in unknown command output
kdb: make "mdr" command repeat
kdb: use __ktime_get_real_seconds instead of __current_kernel_time
misc: kgdbts: Display progress of asynchronous tests
Linus Torvalds [Thu, 12 Apr 2018 17:18:02 +0000 (10:18 -0700)]
Merge tag 'microblaze-4.17-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze updates from Michal Simek:
"Use generic pci_mmap_resource_range()"
* tag 'microblaze-4.17-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Use generic pci_mmap_resource_range()
microblaze: Provide pgprot_device/writecombine macros for nommu
Linus Torvalds [Thu, 12 Apr 2018 16:15:48 +0000 (09:15 -0700)]
Merge tag 'asm-generic' of git://git./linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"I have one regression fix for a minor build problem after the
architecture removal series, plus a rework of the barriers in the
readl/writel functions, thanks to work by Sinan Kaya:
This started from a discussion on the linuxpcc and rdma mailing
lists[1]. To summarize, we decided that architectures are responsible
to serialize readl() and writel() accesses on a device MMIO space
relative to DMA performed by that device.
This series provides a pessimistic implementation of that behavior for
asm-generic/io.h, which is in turn used by a number of architectures
(h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and
xtensa). Some of those presumably need no extra barriers, or something
weaker than rmb()/wmb(), and they are advised to override the new
default for better performance.
For inb()/outb(), the same barriers are used, but architectures might
want to add another barrier to outb() here if that can guarantee
non-posted behavior (some architectures can, others cannot do that).
The readl_relaxed()/writel_relaxed() family of functions retains the
existing behavior with no extra barriers"
[1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html
* tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
io: change writeX_relaxed() to remove barriers
io: change readX_relaxed() to remove barriers
dts: remove cris & metag dts hard link file
io: change inX() to have their own IO barrier overrides
io: change outX() to have their own IO barrier overrides
io: define stronger ordering for the default writeX() implementation
io: define stronger ordering for the default readX() implementation
io: define several IO & PIO barrier types for the asm-generic version
Linus Torvalds [Thu, 12 Apr 2018 01:58:27 +0000 (18:58 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio update from Michael Tsirkin:
"This adds reporting hugepage stats to virtio-balloon"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: export hugetlb page allocation counts
Linus Torvalds [Thu, 12 Apr 2018 01:50:41 +0000 (18:50 -0700)]
Merge tag 'iommu-updates-v4.17' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- OF_IOMMU support for the Rockchip iommu driver so that it can use
generic DT bindings
- rework of locking in the AMD IOMMU interrupt remapping code to make
it work better in RT kernels
- support for improved iotlb flushing in the AMD IOMMU driver
- support for 52-bit physical and virtual addressing in the ARM-SMMU
- various other small fixes and cleanups
* tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (53 commits)
iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_t
iommu/rockchip: Support sharing IOMMU between masters
iommu/rockchip: Add runtime PM support
iommu/rockchip: Fix error handling in init
iommu/rockchip: Use OF_IOMMU to attach devices automatically
iommu/rockchip: Use IOMMU device for dma mapping operations
dt-bindings: iommu/rockchip: Add clock property
iommu/rockchip: Control clocks needed to access the IOMMU
iommu/rockchip: Fix TLB flush of secondary IOMMUs
iommu/rockchip: Use iopoll helpers to wait for hardware
iommu/rockchip: Fix error handling in attach
iommu/rockchip: Request irqs in rk_iommu_probe()
iommu/rockchip: Fix error handling in probe
iommu/rockchip: Prohibit unbind and remove
iommu/amd: Return proper error code in irq_remapping_alloc()
iommu/amd: Make amd_iommu_devtable_lock a spin_lock
iommu/amd: Drop the lock while allocating new irq remap table
iommu/amd: Factor out setting the remap table for a devid
iommu/amd: Use `table' instead `irt' as variable name in amd_iommu_update_ga()
iommu/amd: Remove the special case from alloc_irq_table()
...
Linus Torvalds [Thu, 12 Apr 2018 00:03:20 +0000 (17:03 -0700)]
Merge tag 'pm-4.17-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These include one big-ticket item which is the rework of the idle loop
in order to prevent CPUs from spending too much time in shallow idle
states. It reduces idle power on some systems by 10% or more and may
improve performance of workloads in which the idle loop overhead
matters. This has been in the works for several weeks and it has been
tested and reviewed quite thoroughly.
Also included are changes that finalize the cpufreq cleanup moving
frequency table validation from drivers to the core, a few fixes and
cleanups of cpufreq drivers, a cpuidle documentation update and a PM
QoS core update to mark the expected switch fall-throughs in it.
Specifics:
- Rework the idle loop in order to prevent CPUs from spending too
much time in shallow idle states by making it stop the scheduler
tick before putting the CPU into an idle state only if the idle
duration predicted by the idle governor is long enough.
That required the code to be reordered to invoke the idle governor
before stopping the tick, among other things (Rafael Wysocki,
Frederic Weisbecker, Arnd Bergmann).
- Add the missing description of the residency sysfs attribute to the
cpuidle documentation (Prashanth Prakash).
- Finalize the cpufreq cleanup moving frequency table validation from
drivers to the core (Viresh Kumar).
- Fix a clock leak regression in the armada-37xx cpufreq driver
(Gregory Clement).
- Fix the initialization of the CPU performance data structures for
shared policies in the CPPC cpufreq driver (Shunyong Yang).
- Clean up the ti-cpufreq, intel_pstate and CPPC cpufreq drivers a
bit (Viresh Kumar, Rafael Wysocki).
- Mark the expected switch fall-throughs in the PM QoS core (Gustavo
Silva)"
* tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
tick-sched: avoid a maybe-uninitialized warning
cpufreq: Drop cpufreq_table_validate_and_show()
cpufreq: SCMI: Don't validate the frequency table twice
cpufreq: CPPC: Initialize shared perf capabilities of CPUs
cpufreq: armada-37xx: Fix clock leak
cpufreq: CPPC: Don't set transition_latency
cpufreq: ti-cpufreq: Use builtin_platform_driver()
cpufreq: intel_pstate: Do not include debugfs.h
PM / QoS: mark expected switch fall-throughs
cpuidle: Add definition of residency to sysfs documentation
time: hrtimer: Use timerqueue_iterate_next() to get to the next timer
nohz: Avoid duplication of code related to got_idle_tick
nohz: Gather tick_sched booleans under a common flag field
cpuidle: menu: Avoid selecting shallow states with stopped tick
cpuidle: menu: Refine idle state selection for running tick
sched: idle: Select idle state before stopping the tick
time: hrtimer: Introduce hrtimer_next_event_without()
time: tick-sched: Split tick_nohz_stop_sched_tick()
cpuidle: Return nohz hint from cpuidle_select()
jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC
...
Linus Torvalds [Wed, 11 Apr 2018 23:42:27 +0000 (16:42 -0700)]
Merge tag 'ktest-v4.17' of git://git./linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
"These commits have either been sitting in my INBOX or have been in my
local tree for some time. I need to push them upstream:
- Separate out config-bisect.pl from ktest.pl.
This allows users to do config bisects without full ktest setup.
- Email on status change.
Allow the user to be emailed on test start, finish, failure, etc.
- Other small fixes and enhancements"
* tag 'ktest-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (24 commits)
ktest: Take submenu into account for grub2 menus
ktest.pl: Add MAIL_COMMAND option to define how to send email
ktest.pl: Use run_command to execute sending mail
ktest.pl: Allow dodie be recursive
ktest.pl: Kill test if mailer is not supported
ktest.pl: Add MAIL_PATH option to define where to find the mailer
ktest.pl: No need to print no mailer is specified when mailto is not
Ktest: add email options to sample.config
Ktest: Use dodie for critical falures
Ktest: Add SigInt handling
Ktest: Add email support
ktest.pl: Detect if a config-bisect was interrupted
ktest.pl: Make finding config-bisect.pl dynamic
ktest.pl: Have ktest.pl pass -r to config-bisect.pl to reset bisect
ktest.pl: Use diffconfig if available for failed config bisects
ktest.pl: Allow for the config-bisect.pl output to display to console
ktest: Use config-bisect.pl in ktest.pl
ktest: Add standalone config-bisect.pl program
ktest: Set do_not_reboot=y for CONFIG_BISECT_TYPE=build
ktest: Set buildonly=1 for CONFIG_BISECT_TYPE=build
...
Linus Torvalds [Wed, 11 Apr 2018 23:39:34 +0000 (16:39 -0700)]
Merge tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"Minor bug fixes and improvements"
* tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifs:
ubi: Reject MLC NAND
ubifs: Remove useless parameter of lpt_heap_replace
ubifs: Constify struct ubifs_lprops in scan_for_leb_for_idx
ubifs: remove unnecessary assignment
ubi: Fix error for write access
ubi: fastmap: Don't flush fastmap work on detach
ubifs: Check ubifs_wbuf_sync() return code
Linus Torvalds [Wed, 11 Apr 2018 23:36:47 +0000 (16:36 -0700)]
Merge git://git./pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- a new and faster epoll based IRQ controller and NIC driver
- misc fixes and janitorial updates
* git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
Fix vector raw inintialization logic
Migrate vector timers to new timer API
um: Compile with modern headers
um: vector: Fix an error handling path in 'vector_parse()'
um: vector: Fix a memory allocation check
um: vector: fix missing unlock on error in vector_net_open()
um: Add missing EXPORT for free_irq_by_fd()
High Performance UML Vector Network Driver
Epoll based IRQ controller
um: Use POSIX ucontext_t instead of struct ucontext
um: time: Use timespec64 for persistent clock
um: Restore symbol versions for __memcpy and memcpy
Linus Torvalds [Wed, 11 Apr 2018 23:12:21 +0000 (16:12 -0700)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here is a very small set of fixes for inclusion in linux-4.17-rc1: Two
changes for the maintainer file, and one more fix for the newly added
npcm platform, to enable the level 2 cache controller"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: Update ASPEED entry with details
MAINTAINERS: Migrate oxnas list to groups.io
arm: npcm: enable L2 cache in NPCM7xx architecture
Linus Torvalds [Wed, 11 Apr 2018 23:02:18 +0000 (16:02 -0700)]
Merge tag 'nios2-v4.17-rc1' of git://git./linux/kernel/git/lftan/nios2
Pull nios2 update from Ley Foon Tan:
"Use read_persistent_clock64() instead of read_persistent_clock()"
* tag 'nios2-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
nios2: Use read_persistent_clock64() instead of read_persistent_clock()
David S. Miller [Wed, 11 Apr 2018 21:41:28 +0000 (17:41 -0400)]
Merge branch 'l2tp-tunnel-creation-fixes'
Guillaume Nault says:
====================
l2tp: tunnel creation fixes
L2TP tunnel creation is racy. We need to make sure that the tunnel
returned by l2tp_tunnel_create() isn't going to be freed while the
caller is using it. This is done in patch #1, by separating tunnel
creation from tunnel registration.
With the tunnel registration code in place, we can now check for
duplicate tunnels in a race-free way. This is done in patch #2, which
incidentally removes the last use of l2tp_tunnel_find().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Tue, 10 Apr 2018 19:01:13 +0000 (21:01 +0200)]
l2tp: fix race in duplicate tunnel detection
We can't use l2tp_tunnel_find() to prevent l2tp_nl_cmd_tunnel_create()
from creating a duplicate tunnel. A tunnel can be concurrently
registered after l2tp_tunnel_find() returns. Therefore, searching for
duplicates must be done at registration time.
Finally, remove l2tp_tunnel_find() entirely as it isn't use anywhere
anymore.
Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Tue, 10 Apr 2018 19:01:12 +0000 (21:01 +0200)]
l2tp: fix races in tunnel creation
l2tp_tunnel_create() inserts the new tunnel into the namespace's tunnel
list and sets the socket's ->sk_user_data field, before returning it to
the caller. Therefore, there are two ways the tunnel can be accessed
and freed, before the caller even had the opportunity to take a
reference. In practice, syzbot could crash the module by closing the
socket right after a new tunnel was returned to pppol2tp_create().
This patch moves tunnel registration out of l2tp_tunnel_create(), so
that the caller can safely hold a reference before publishing the
tunnel. This second step is done with the new l2tp_tunnel_register()
function, which is now responsible for associating the tunnel to its
socket and for inserting it into the namespace's list.
While moving the code to l2tp_tunnel_register(), a few modifications
have been done. First, the socket validation tests are done in a helper
function, for clarity. Also, modifying the socket is now done after
having inserted the tunnel to the namespace's tunnels list. This will
allow insertion to fail, without having to revert theses modifications
in the error path (a followup patch will check for duplicate tunnels
before insertion). Either the socket is a kernel socket which we
control, or it is a user-space socket for which we have a reference on
the file descriptor. In any case, the socket isn't going to be closed
from under us.
Reported-by: syzbot+fbeeb5c3b538e8545644@syzkaller.appspotmail.com
Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Tue, 10 Apr 2018 14:28:56 +0000 (16:28 +0200)]
tun: send netlink notification when the device is modified
I added dumping of link information about tun devices over netlink in
commit
1ec010e70593 ("tun: export flags, uid, gid, queue information
over netlink"), but didn't add the missing netlink notifications when
the device's exported properties change.
This patch adds notifications when owner/group or flags are modified,
when queues are attached/detached, and when a tun fd is closed.
Reported-by: Thomas Haller <thaller@redhat.com>
Fixes: 1ec010e70593 ("tun: export flags, uid, gid, queue information over netlink")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Tue, 10 Apr 2018 14:28:55 +0000 (16:28 +0200)]
tun: set the flags before registering the netdevice
Otherwise, register_netdevice advertises the creation of the device with
the default flags, instead of what the user requested.
Reported-by: Thomas Haller <thaller@redhat.com>
Fixes: 1ec010e70593 ("tun: export flags, uid, gid, queue information over netlink")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Elwell [Tue, 10 Apr 2018 12:18:25 +0000 (13:18 +0100)]
lan78xx: Don't reset the interface on open
Commit
92571a1aae40 ("lan78xx: Connect phy early") moves the PHY
initialisation into lan78xx_probe, but lan78xx_open subsequently calls
lan78xx_reset. As well as forcing a second round of link negotiation,
this reset frequently prevents the phy interrupt from being generated
(even though the link is up), rendering the interface unusable.
Fix this issue by removing the lan78xx_reset call from lan78xx_open.
Fixes: 92571a1aae40 ("lan78xx: Connect phy early")
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 Apr 2018 18:42:00 +0000 (14:42 -0400)]
Merge branch 'bnxt_en-Fixes-for-net'
Michael Chan says:
====================
bnxt_en: Fixes for net.
This bug fix series include NULL pointer fixes in ethtool -x code path
and in the error clean up path when freeing IRQs, a ring accounting bug
that missed rings used by the RDMA driver, and 3 bug fixes related to TC
Flower and VF-reps.
v2: Fixed commit message of patch 4. Changed the pound sign to $ sign
in front of the ip command.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 11 Apr 2018 15:50:18 +0000 (11:50 -0400)]
bnxt_en: Fix NULL pointer dereference at bnxt_free_irq().
When open fails during ethtool -L ring change, for example, the driver
may crash at bnxt_free_irq() because bp->bnapi is NULL.
If we fail to allocate all the new rings, bnxt_open_nic() will free
all the memory including bp->bnapi. Subsequent call to bnxt_close_nic()
will try to dereference bp->bnapi in bnxt_free_irq().
Fix it by checking for !bp->bnapi in bnxt_free_irq().
Fixes: e5811b8c09df ("bnxt_en: Add IRQ remapping logic.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 11 Apr 2018 15:50:17 +0000 (11:50 -0400)]
bnxt_en: Need to include RDMA rings in bnxt_check_rings().
With recent changes to reserve both L2 and RDMA rings, we need to include
the RDMA rings in bnxt_check_rings(). Otherwise we will under-estimate
the rings we need during ethtool -L and may lead to failure.
Fixes: fbcfc8e46741 ("bnxt_en: Reserve completion rings and MSIX for bnxt_re RDMA driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sriharsha Basavapatna [Wed, 11 Apr 2018 15:50:16 +0000 (11:50 -0400)]
bnxt_en: Support max-mtu with VF-reps
While a VF is configured with a bigger mtu (> 1500), any packets that
are punted to the VF-rep (slow-path) get dropped by OVS kernel-datapath
with the following message: "dropped over-mtu packet". Fix this by
returning the max-mtu value for a VF-rep derived from its corresponding VF.
VF-rep's mtu can be changed using 'ip' command as shown in this example:
$ ip link set bnxt0_pf0vf0 mtu 9000
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sriharsha Basavapatna [Wed, 11 Apr 2018 15:50:15 +0000 (11:50 -0400)]
bnxt_en: Ignore src port field in decap filter nodes
The driver currently uses src port field (along with other fields) in the
decap tunnel key, while looking up and adding tunnel nodes. This leads to
redundant cfa_decap_filter_alloc() requests to the FW and flow-miss in the
flow engine. Fix this by ignoring the src port field in decap tunnel nodes.
Fixes: f484f6782e01 ("bnxt_en: add hwrm FW cmds for cfa_encap_record and decap_filter")
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Gospodarek [Wed, 11 Apr 2018 15:50:14 +0000 (11:50 -0400)]
bnxt_en: do not allow wildcard matches for L2 flows
Before this patch the following commands would succeed as far as the
user was concerned:
$ tc qdisc add dev p1p1 ingress
$ tc filter add dev p1p1 parent ffff: protocol all \
flower skip_sw action drop
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw src_mac 00:02:00:00:00:01/44 action drop
The current flow offload infrastructure used does not support wildcard
matching for ethernet headers, so do not allow the second or third
commands to succeed. If a user wants to drop traffic on that interface
the protocol and MAC addresses need to be specified explicitly:
$ tc qdisc add dev p1p1 ingress
$ tc filter add dev p1p1 parent ffff: protocol arp \
flower skip_sw action drop
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw action drop
...
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw src_mac 00:02:00:00:00:01 action drop
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw src_mac 00:02:00:00:00:02 action drop
...
There are also checks for VLAN parameters in this patch as other callers
may wildcard those parameters even if tc does not. Using different
flow infrastructure could allow this to work in the future for L2 flows,
but for now it does not.
Fixes: 2ae7408fedfe ("bnxt_en: bnxt: add TC flower filter offload support")
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 11 Apr 2018 15:50:13 +0000 (11:50 -0400)]
bnxt_en: Fix ethtool -x crash when device is down.
Fix ethtool .get_rxfh() crash by checking for valid indirection table
address before copying the data.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 11 Apr 2018 17:51:26 +0000 (10:51 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
- almost all of the rest of MM
- kasan updates
- lots of procfs work
- misc things
- lib/ updates
- checkpatch
- rapidio
- ipc/shm updates
- the start of willy's XArray conversion
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (140 commits)
page cache: use xa_lock
xarray: add the xa_lock to the radix_tree_root
fscache: use appropriate radix tree accessors
export __set_page_dirty
unicore32: turn flush_dcache_mmap_lock into a no-op
arm64: turn flush_dcache_mmap_lock into a no-op
mac80211_hwsim: use DEFINE_IDA
radix tree: use GFP_ZONEMASK bits of gfp_t for flags
linux/const.h: refactor _BITUL and _BITULL a bit
linux/const.h: move UL() macro to include/linux/const.h
linux/const.h: prefix include guard of uapi/linux/const.h with _UAPI
xen, mm: allow deferred page initialization for xen pv domains
elf: enforce MAP_FIXED on overlaying elf segments
fs, elf: drop MAP_FIXED usage from elf_map
mm: introduce MAP_FIXED_NOREPLACE
MAINTAINERS: update bouncing aacraid@adaptec.com addresses
fs/dcache.c: add cond_resched() in shrink_dentry_list()
include/linux/kfifo.h: fix comment
ipc/shm.c: shm_split(): remove unneeded test for NULL shm_file_data.vm_ops
kernel/sysctl.c: add kdoc comments to do_proc_do{u}intvec_minmax_conv_param
...
Matthew Wilcox [Tue, 10 Apr 2018 23:36:56 +0000 (16:36 -0700)]
page cache: use xa_lock
Remove the address_space ->tree_lock and use the xa_lock newly added to
the radix_tree_root. Rename the address_space ->page_tree to ->i_pages,
since we don't really care that it's a tree.
[willy@infradead.org: fix nds32, fs/dax.c]
Link: http://lkml.kernel.org/r/20180406145415.GB20605@bombadil.infradead.orgLink:
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Tue, 10 Apr 2018 23:36:52 +0000 (16:36 -0700)]
xarray: add the xa_lock to the radix_tree_root
This results in no change in structure size on 64-bit machines as it
fits in the padding between the gfp_t and the void *. 32-bit machines
will grow the structure from 8 to 12 bytes. Almost all radix trees are
protected with (at least) a spinlock, so as they are converted from
radix trees to xarrays, the data structures will shrink again.
Initialising the spinlock requires a name for the benefit of lockdep, so
RADIX_TREE_INIT() now needs to know the name of the radix tree it's
initialising, and so do IDR_INIT() and IDA_INIT().
Also add the xa_lock() and xa_unlock() family of wrappers to make it
easier to use the lock. If we could rely on -fplan9-extensions in the
compiler, we could avoid all of this syntactic sugar, but that wasn't
added until gcc 4.6.
Link: http://lkml.kernel.org/r/20180313132639.17387-8-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Tue, 10 Apr 2018 23:36:48 +0000 (16:36 -0700)]
fscache: use appropriate radix tree accessors
Don't open-code accesses to data structure internals.
Link: http://lkml.kernel.org/r/20180313132639.17387-7-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Tue, 10 Apr 2018 23:36:44 +0000 (16:36 -0700)]
export __set_page_dirty
XFS currently contains a copy-and-paste of __set_page_dirty(). Export
it from buffer.c instead.
Link: http://lkml.kernel.org/r/20180313132639.17387-6-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Tue, 10 Apr 2018 23:36:40 +0000 (16:36 -0700)]
unicore32: turn flush_dcache_mmap_lock into a no-op
Unicore doesn't walk the VMA tree in its flush_dcache_page()
implementation, so has no need to take the tree_lock.
Link: http://lkml.kernel.org/r/20180313132639.17387-5-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Tue, 10 Apr 2018 23:36:36 +0000 (16:36 -0700)]
arm64: turn flush_dcache_mmap_lock into a no-op
ARM64 doesn't walk the VMA tree in its flush_dcache_page()
implementation, so has no need to take the tree_lock.
Link: http://lkml.kernel.org/r/20180313132639.17387-4-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / openwrt / staging / blogic.git / log