Steven Barth [Sat, 22 Jun 2013 08:31:28 +0000 (08:31 +0000)]
6relayd: fix lease-update behaviour for clients without reconfigure
SVN-Revision: 37011
Steven Barth [Sat, 22 Jun 2013 08:19:25 +0000 (08:19 +0000)]
6relayd: Keep PD-downstream across RENEW/REBIND
SVN-Revision: 37009
John Crispin [Fri, 21 Jun 2013 16:54:46 +0000 (16:54 +0000)]
mac80211: fix compile error on rt2x00 when buildin for SoC
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37008
John Crispin [Fri, 21 Jun 2013 16:54:37 +0000 (16:54 +0000)]
packages: clean up the package folder
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37007
John Crispin [Fri, 21 Jun 2013 16:54:15 +0000 (16:54 +0000)]
lantiq: Tune the XWAY subtarget cflags
This patch sets the cflags -mtune=34kc -mdsp only in XWAY subtarget, while the others remain with mtune=mips32r2.
Although the Danube has a Mips 24KEc core performs well with the above cflags.
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
SVN-Revision: 37006
John Crispin [Fri, 21 Jun 2013 16:54:07 +0000 (16:54 +0000)]
lantiq: set mips16 support.
Set mips16 support in XWAY subtarget.
This patch is based in changeset #36600
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37005
John Crispin [Fri, 21 Jun 2013 16:54:03 +0000 (16:54 +0000)]
lantiq: Fix ARV7518 DTS definitions
Fix EBU leds by removing req2 and gnt2 from pinmux.
Fix rfkill button gpio.
Enable reset button.
Fix power led activation status.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 37004
John Crispin [Fri, 21 Jun 2013 16:53:59 +0000 (16:53 +0000)]
base-files: module loading is now handled by ubox/kmodloader
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37003
John Crispin [Fri, 21 Jun 2013 16:53:55 +0000 (16:53 +0000)]
base-files: /etc/init.d/rcS is no longer needed, procd handles this for us now
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37002
John Crispin [Fri, 21 Jun 2013 16:53:51 +0000 (16:53 +0000)]
base-files: drop 2 pointless hotplug trigger stubs
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37001
John Crispin [Fri, 21 Jun 2013 16:53:47 +0000 (16:53 +0000)]
base-files: input/button drivers get loaded before preinit by procd
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37000
John Crispin [Fri, 21 Jun 2013 16:53:43 +0000 (16:53 +0000)]
base-files: diag does not need to insmod any drivers, procd already did it for us
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36999
John Crispin [Fri, 21 Jun 2013 16:53:38 +0000 (16:53 +0000)]
base-files: procd is now the init process
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36998
John Crispin [Fri, 21 Jun 2013 16:53:30 +0000 (16:53 +0000)]
busybox: procd is now the init process
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36997
John Crispin [Fri, 21 Jun 2013 16:53:26 +0000 (16:53 +0000)]
base-files: procd init is now the default, remove files.old
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36996
John Crispin [Fri, 21 Jun 2013 16:53:22 +0000 (16:53 +0000)]
procd: update to latest git revision
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36995
John Crispin [Fri, 21 Jun 2013 16:53:19 +0000 (16:53 +0000)]
procd: fix hotplug rule to not return on default makedev trigger
this allows the subsystem trigger to also be called
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36994
John Crispin [Fri, 21 Jun 2013 16:53:15 +0000 (16:53 +0000)]
brcm47xx: dont manually insmod switch drivers
Signed-off-by: John Crispin <bloic@openwrt.org>
SVN-Revision: 36993
John Crispin [Fri, 21 Jun 2013 16:53:11 +0000 (16:53 +0000)]
ar71xx: drop procd_init console hack
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36992
John Crispin [Fri, 21 Jun 2013 16:53:07 +0000 (16:53 +0000)]
hostapd: remove old button hotplug script
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36991
John Crispin [Fri, 21 Jun 2013 16:53:03 +0000 (16:53 +0000)]
ubox: update to latest git version
add block mount / extroot support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36989
John Crispin [Fri, 21 Jun 2013 16:53:00 +0000 (16:53 +0000)]
block-mount: drop package, ubox now does the job for us
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36988
John Crispin [Fri, 21 Jun 2013 16:52:56 +0000 (16:52 +0000)]
hotplug2: procd does the hotplugging now
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36987
John Crispin [Fri, 21 Jun 2013 16:52:52 +0000 (16:52 +0000)]
util-linux: move package to package/system/utils
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36986
John Crispin [Fri, 21 Jun 2013 16:52:48 +0000 (16:52 +0000)]
util-linux: fix endianess bug and stage libraries properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36985
Felix Fietkau [Fri, 21 Jun 2013 15:19:31 +0000 (15:19 +0000)]
libubox: update to latest version, fixes utf-8 corruption issues in blobmsg_json
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36984
Felix Fietkau [Fri, 21 Jun 2013 10:57:35 +0000 (10:57 +0000)]
ath9k_htc: fix idle mode handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36983
Imre Kaloz [Fri, 21 Jun 2013 10:57:05 +0000 (10:57 +0000)]
increase kernel partition size to fix boot issues
SVN-Revision: 36982
Steven Barth [Fri, 21 Jun 2013 06:15:09 +0000 (06:15 +0000)]
6relayd: Fix DHCPv6-PD assignment logic
SVN-Revision: 36980
Florian Fainelli [Thu, 20 Jun 2013 18:47:36 +0000 (18:47 +0000)]
brcm63xx: reduce the number of Ethernet DMA channels from 16 to 8
We currently used 16 DMA Ethernet channels, but the hardware only
supports up to 8 (with 2 per enet and the remaining for USB slave).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36979
Hauke Mehrtens [Thu, 20 Jun 2013 15:03:28 +0000 (15:03 +0000)]
mac80211: add rt2x00-mmio package to store the common parts for SoC and PCI access
This should fix a build error on ramips.
SVN-Revision: 36978
Felix Fietkau [Thu, 20 Jun 2013 13:10:31 +0000 (13:10 +0000)]
ath9k: fix cabq depth accounting
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36977
Hauke Mehrtens [Wed, 19 Jun 2013 21:37:56 +0000 (21:37 +0000)]
acx-mac80211: make it compile with the new backports mac80211
SVN-Revision: 36976
Hauke Mehrtens [Wed, 19 Jun 2013 21:36:52 +0000 (21:36 +0000)]
mac80211: libertas-sd depends on mmc
SVN-Revision: 36975
Hauke Mehrtens [Wed, 19 Jun 2013 21:36:22 +0000 (21:36 +0000)]
mac80211: copy the backport-include files to staging_dir
SVN-Revision: 36974
Hauke Mehrtens [Wed, 19 Jun 2013 21:33:31 +0000 (21:33 +0000)]
mac80211: do not use CPTCFG_SSB and CPTCFG_BCMA
ssb and bcma are not build by compat-wireless / backports and the
config symbols are also not taken from there. Use the in kernel config
symbols. This fixes a build error in brcmsmac/led.c
SVN-Revision: 36973
Hauke Mehrtens [Wed, 19 Jun 2013 21:29:34 +0000 (21:29 +0000)]
mac80211: do not build RT2X00_LIB_XXX when XXX is not available in the kernel.
It was possible to select RT2X00_LIB_PCI without PCI being selected.
This closes #13720
mrkiko thanks for testing.
SVN-Revision: 36972
Steven Barth [Wed, 19 Jun 2013 13:08:33 +0000 (13:08 +0000)]
6relayd: correctly set downstream routes for DHCPv6-PD
SVN-Revision: 36969
Felix Fietkau [Tue, 18 Jun 2013 22:23:38 +0000 (22:23 +0000)]
linux-3.8: backport a leds-gpio.c crash fix (fixes #13721)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36968
Felix Fietkau [Tue, 18 Jun 2013 21:53:46 +0000 (21:53 +0000)]
tools/mkimage: add back a fixed version of 040-include_order.patch to fix build errors on some systems (#12232)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36967
Felix Fietkau [Tue, 18 Jun 2013 16:24:48 +0000 (16:24 +0000)]
netifd: update to latest version, fixes a NULL pointer deref bug
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36965
Jo-Philipp Wich [Tue, 18 Jun 2013 14:30:51 +0000 (14:30 +0000)]
firewall: update to git head
- fixes misprocessing of unknown symbolic protocol names
SVN-Revision: 36963
Jo-Philipp Wich [Tue, 18 Jun 2013 14:14:35 +0000 (14:14 +0000)]
firewall: update to git head
- fixes calculation of IPv4 netmasks derived from 0.0.0.0/0 CIDRs
SVN-Revision: 36960
Steven Barth [Tue, 18 Jun 2013 12:51:14 +0000 (12:51 +0000)]
odhcp6c: Add option to override interface identifier in RA-client
SVN-Revision: 36959
Florian Fainelli [Tue, 18 Jun 2013 10:54:28 +0000 (10:54 +0000)]
brcm63xx: refresh 3.9 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36958
Florian Fainelli [Tue, 18 Jun 2013 10:54:24 +0000 (10:54 +0000)]
brcm63xx: provide a default sane MAC address for Cable Modem devices
Cable modem devices currently poke at some random location in RAM and
may end up having an invalid MAC address which is not suitable. Provide
a default one which is sane.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36957
Felix Fietkau [Tue, 18 Jun 2013 10:52:40 +0000 (10:52 +0000)]
libubox: update to latest version, fixes uloop recursion issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36956
Felix Fietkau [Tue, 18 Jun 2013 10:52:33 +0000 (10:52 +0000)]
ustream-ssl: update to latest version, fixes uhttpd infinite loop issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36955
Florian Fainelli [Mon, 17 Jun 2013 22:57:04 +0000 (22:57 +0000)]
brcm63xx: create initramfs HCS images
Cable Modem devices cannot load an ELF file directly so we need to
provide them with a HCS image even when targetting initramfs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36954
Steven Barth [Mon, 17 Jun 2013 21:29:14 +0000 (21:29 +0000)]
netifd: IPv6: Fix sorting order in last commit.
SVN-Revision: 36952
Steven Barth [Mon, 17 Jun 2013 21:16:22 +0000 (21:16 +0000)]
netifd: Satisfy IPv6 assignments ordered by prefix length
SVN-Revision: 36950
Florian Fainelli [Mon, 17 Jun 2013 19:32:56 +0000 (19:32 +0000)]
brcm63xx: simplify HCS image creation
$(KDIR)/vmlinux is already a binary image, there is no need to create
another one.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36949
Florian Fainelli [Mon, 17 Jun 2013 19:32:47 +0000 (19:32 +0000)]
brcm63xx: remove support for 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36948
Florian Fainelli [Mon, 17 Jun 2013 19:32:42 +0000 (19:32 +0000)]
brcm63xx: switch to 3.9 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36947
Florian Fainelli [Mon, 17 Jun 2013 19:32:35 +0000 (19:32 +0000)]
brcm63xx: fix missing antislash in BCM6345 ethernet patch
This would cause build failure when disabling support for particular
CPUs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36946
Jo-Philipp Wich [Mon, 17 Jun 2013 11:59:29 +0000 (11:59 +0000)]
hostapd: correctly handle macfile uci option
Make hostapd.sh correctly handle the macfile uci option.
Such option specifies the macfile name to pass into the
hostapd configuration file. Moreover, if a maclist option
has been specified, copy the macfile before appending new
entries.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
SVN-Revision: 36944
Jo-Philipp Wich [Mon, 17 Jun 2013 11:55:30 +0000 (11:55 +0000)]
dnsmasq: use host-record instead of address
Using "--address" for individual host A records is broken, use "--host-record" instead.
The following patch changes dnsmasq.init to build individual host records using "--host-record" instead of "--address".
Signed-off-by: Adam Gensler <openwrt at gnslr.us>
[jow: shorter description, simplified shell script code]
SVN-Revision: 36943
Jo-Philipp Wich [Mon, 17 Jun 2013 11:33:36 +0000 (11:33 +0000)]
base-files: network.sh: extend network_get_ipaddr6() / network_get_subnet6() to take ipv6-prefix-assignment into account, add further helper functions to fetch all ips of a given interface
SVN-Revision: 36942
Felix Fietkau [Sun, 16 Jun 2013 12:56:16 +0000 (12:56 +0000)]
ath9k: revert parts of the ANI changes in the latest mac80211 update to fix regressions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36941
Felix Fietkau [Sun, 16 Jun 2013 09:25:41 +0000 (09:25 +0000)]
mac80211: fix disabling rfkill support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36940
Felix Fietkau [Sat, 15 Jun 2013 20:14:06 +0000 (20:14 +0000)]
mac80211: update to wireless-testing 2013-06-13 + latest backport infrastructure
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36939
Felix Fietkau [Sat, 15 Jun 2013 11:50:50 +0000 (11:50 +0000)]
kirkwood: disable the CONFIG_IP_ADVANCED_ROUTER kernel config override (#13702)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36937
Jo-Philipp Wich [Thu, 13 Jun 2013 18:54:49 +0000 (18:54 +0000)]
firewall: update to git head
- properly process intermediate "!" options in argument list (fixes negated ipsets)
SVN-Revision: 36935
Jo-Philipp Wich [Thu, 13 Jun 2013 12:49:00 +0000 (12:49 +0000)]
firewall: update to git head
- fixes handling of reject target for rule sections with specific destination zone
SVN-Revision: 36933
Jo-Philipp Wich [Thu, 13 Jun 2013 11:55:12 +0000 (11:55 +0000)]
uhttpd: expose missing options to uci
SVN-Revision: 36932
Steven Barth [Thu, 13 Jun 2013 06:38:48 +0000 (06:38 +0000)]
odhcp6c: add sanity checks for NDP and MTU parameters from RAs
SVN-Revision: 36930
Hauke Mehrtens [Wed, 12 Jun 2013 14:51:50 +0000 (14:51 +0000)]
brcm47xx: run make kernel_oldconfig for 3.9 kernel config
SVN-Revision: 36928
Hauke Mehrtens [Wed, 12 Jun 2013 14:48:45 +0000 (14:48 +0000)]
brcm47xx: remove support for kernel 3.6
SVN-Revision: 36927
Hauke Mehrtens [Wed, 12 Jun 2013 14:47:53 +0000 (14:47 +0000)]
brcm47xx: add initial support for kernel 3.9
SVN-Revision: 36926
Hauke Mehrtens [Wed, 12 Jun 2013 13:59:34 +0000 (13:59 +0000)]
kernel: add dependencies for kernel 3.10
SVN-Revision: 36925
Steven Barth [Tue, 11 Jun 2013 20:52:27 +0000 (20:52 +0000)]
6relayd: make route preference and prefix on-link flag configurable
SVN-Revision: 36922
Steven Barth [Tue, 11 Jun 2013 14:10:45 +0000 (14:10 +0000)]
base-files: remove unnecessary early sysctl-hack
SVN-Revision: 36920
Steven Barth [Tue, 11 Jun 2013 13:30:18 +0000 (13:30 +0000)]
base-files: set default IPv6 forwarding value to 1
SVN-Revision: 36918
Felix Fietkau [Tue, 11 Jun 2013 12:51:08 +0000 (12:51 +0000)]
uci: update to fix excessive reorder delta entry duplication (#13678)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36915
Felix Fietkau [Tue, 11 Jun 2013 11:46:54 +0000 (11:46 +0000)]
libubox: update to latest version, fixes an uloop use-after-free bug
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36914
Steven Barth [Tue, 11 Jun 2013 09:27:53 +0000 (09:27 +0000)]
linux: add ipv6 failed-policy routing action (by Jonas Gorski)
SVN-Revision: 36911
Steven Barth [Tue, 11 Jun 2013 09:27:46 +0000 (09:27 +0000)]
iproute2: add drop-failed rule action (patch by Jonas Gorski)
SVN-Revision: 36910
Felix Fietkau [Mon, 10 Jun 2013 12:42:30 +0000 (12:42 +0000)]
netifd: update to latest version, uses the new uci/blob code from libuci
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36909
Felix Fietkau [Mon, 10 Jun 2013 12:42:25 +0000 (12:42 +0000)]
uci: update to latest version, adds uci<->blobmsg conversion code from netifd
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36908
Felix Fietkau [Mon, 10 Jun 2013 12:42:20 +0000 (12:42 +0000)]
libubox: update to latest version, adds some helper function
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36907
Steven Barth [Mon, 10 Jun 2013 10:42:34 +0000 (10:42 +0000)]
ppp: correctly handle address when reloading
SVN-Revision: 36904
Steven Barth [Mon, 10 Jun 2013 10:42:15 +0000 (10:42 +0000)]
netifd: improve reloading behaviour
SVN-Revision: 36903
John Crispin [Mon, 10 Jun 2013 08:25:17 +0000 (08:25 +0000)]
lantiq: atm: Use a tasklet to handle incoming packets. Fix #12917.
Incoming packets are now processes in a tasklet instead of in the
irq handler; this should improve latency.
This patch is based on a previous version of ltq-atm driver, which
did implement a tasklet.
It has been tested on a arv4518pw with a
Lantiq Danube for about a month and it seems to work well.
Signed-off-by: Luca Dariz <luca.dariz@gmail.com>
Tested-by: Luca Dariz <luca.dariz@gmail.com>
SVN-Revision: 36902
John Crispin [Mon, 10 Jun 2013 08:25:12 +0000 (08:25 +0000)]
lantiq: Fixes to athxk EEPROM loading
Use platform data array for storing ath5k EEPROM instead of creating another one.
EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash.
No need to keep the checksum fix now that the EEPROM is loaded completely.
Add a manual eeprom swap for ath9k and keep the endian way.
Use mac-offset property retrieved from the DTS.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 36901
John Crispin [Mon, 10 Jun 2013 08:25:07 +0000 (08:25 +0000)]
lantiq: make kernel_oldconfig
Seems the existing kernel config for 3.8 was cp'ed from 3.7; this patch
is the result of "make kernel_oldconfig" with defaults for new options.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36900
John Crispin [Mon, 10 Jun 2013 08:25:02 +0000 (08:25 +0000)]
lantiq: diag.sh with both red and green power LEDs
This provides a boot LED sequence suitable for devices with both red and
green LEDs for power. This assumes no "default-on" settings in the
device tree.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36899
John Crispin [Mon, 10 Jun 2013 08:24:56 +0000 (08:24 +0000)]
ramips: add HAME MPR-A2 support
This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2
Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>
SVN-Revision: 36898
John Crispin [Mon, 10 Jun 2013 08:24:50 +0000 (08:24 +0000)]
ramips: add support for belkin F7C027 wemo/homeautomatisation plug
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 36897
John Crispin [Mon, 10 Jun 2013 08:24:44 +0000 (08:24 +0000)]
procd: make the preinit rules wildcard all buttons for failsafe
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36896
John Crispin [Mon, 10 Jun 2013 08:24:39 +0000 (08:24 +0000)]
procd: update to latest git revision
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36895
John Crispin [Mon, 10 Jun 2013 08:24:35 +0000 (08:24 +0000)]
ubox: update to latest git revision
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36894
John Crispin [Mon, 10 Jun 2013 08:24:31 +0000 (08:24 +0000)]
sysupgrade: create state file so procd knows when a sysupgrade is in progress
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36893
John Crispin [Mon, 10 Jun 2013 08:24:25 +0000 (08:24 +0000)]
modules: make all led and button modules used during boot priority 1
This makes sure the modules are symlinked in /etc/modules-boot.d/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36892
John Crispin [Mon, 10 Jun 2013 08:24:13 +0000 (08:24 +0000)]
base-files: fix failsafe via button press
entering failsafe by pressing a button during boot was broken for procd as init
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36891
John Crispin [Mon, 10 Jun 2013 08:24:02 +0000 (08:24 +0000)]
base-files: change PATH order
This allows packages to override busybox applets by placing the new
binaries in /usr/{sbin,bin}
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36890
Jo-Philipp Wich [Sun, 9 Jun 2013 14:39:14 +0000 (14:39 +0000)]
iwinfo: add phyname attribute, this is useful to group networks by radio phy
SVN-Revision: 36889
Jo-Philipp Wich [Sun, 9 Jun 2013 14:39:09 +0000 (14:39 +0000)]
libiwinfo: ignore log messages from wpa_supplicant while scanning
wpa_supplicant may send log and event messages intermixed with the
expected scan results. This makes "iwinfo wlan0 scan" and LuCI
"site survey" display nothing when many AP's are around.
Eliminate the CTRL-EVENT-BSS-ADDED events, interspersed log messages,
lines with unexpected format. Increase timeout to handle the max
number of channels (2.4, 3.6, 4.9, 5 GHz). Insure receive buffer is
null-terminated.
Signed-off-by: Jean-Pierre Tosoni <jp.tosoni@acksys.fr>
SVN-Revision: 36888
Steven Barth [Sat, 8 Jun 2013 13:26:33 +0000 (13:26 +0000)]
netifd: Improve IPv6 source-routing policies
SVN-Revision: 36884
Jonas Gorski [Sat, 8 Jun 2013 11:44:12 +0000 (11:44 +0000)]
netifd: bring wifi down before shutting down
works around wifiX references not being freed on network restart.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36883
Luka Perkov [Sat, 8 Jun 2013 11:36:07 +0000 (11:36 +0000)]
lantiq: fix formating in .dts files
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36882
projects / openwrt / staging / mans0n.git / log