scsi: qla2xxx: Fix N2N link up fail

During link up/bounce, qla driver would do command flush as part of
cleanup.  In this case, the flush can intefere with FW state.  This patch
allows FW to be in control of link up.

Link: https://lore.kernel.org/r/20190912180918.6436-7-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix N2N link reset

Fix stalled link recovery for N2N with FC-NVMe connection.

Link: https://lore.kernel.org/r/20190912180918.6436-6-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Optimize NPIV tear down process

In the case of NPIV port is being torn down, this patch will set a flag to
indicate VPORT_DELETE. This would prevent relogin to be triggered.

Link: https://lore.kernel.org/r/20190912180918.6436-5-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix stale mem access on driver unload

On driver unload, 'remove_one' thread was allowed to advance, while session
cleanup still lag behind.  This patch ensures session deletion will finish
before remove_one can advance.

Link: https://lore.kernel.org/r/20190912180918.6436-4-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix unbound sleep in fcport delete path.

There are instances, though rare, where a LOGO request cannot be sent out
and the thread in free session done can wait indefinitely. Fix this by
putting an upper bound to sleep.

Link: https://lore.kernel.org/r/20190912180918.6436-3-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Silence fwdump template message

Print if fwdt template is present or not, only when
ql2xextended_error_logging is enabled.

Link: https://lore.kernel.org/r/20190912180918.6436-2-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Make three functions static

Fix sparse warnings:

drivers/scsi/hisi_sas/hisi_sas_main.c:3686:6:
 warning: symbol 'hisi_sas_debugfs_release' was not declared. Should it be static?
drivers/scsi/hisi_sas/hisi_sas_main.c:3708:5:
 warning: symbol 'hisi_sas_debugfs_alloc' was not declared. Should it be static?
drivers/scsi/hisi_sas/hisi_sas_main.c:3799:6:
 warning: symbol 'hisi_sas_debugfs_bist_init' was not declared. Should it be static?

Link: https://lore.kernel.org/r/20190923054035.19036-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid: disable device when probe failed after enabled device

For pci device, need to disable device when probe failed after enabled
device.

Link: https://lore.kernel.org/r/1567818450-173315-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue

storvsc doesn't use a dedicated hardware queue for a given CPU queue. When
issuing I/O, it selects returning CPU (hardware queue) dynamically based on
vmbus channel usage across all channels.

This patch advertises num_present_cpus() as number of hardware queues. This
will have upper layer setup 1:1 mapping between hardware queue and CPU
queue and avoid unnecessary locking when issuing I/O.

Link: https://lore.kernel.org/r/1567790660-48142-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Remove always false 'tmp_prio < 0' statement

Since tmp_prio is declared as u8, the following statement is always false.
   tmp_prio < 0

So remove 'always false' statement.

Link: https://lore.kernel.org/r/20190919075548.GA112801@LGEARND20B15
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: skip shutdown if hba is not powered

In some cases, hba may go through shutdown flow without successful
initialization and then make system hang.

For example, if ufshcd_change_power_mode() gets error and leads to
ufshcd_hba_exit() to release resources of the host, future shutdown flow
may hang the system since the host register will be accessed in unpowered
state.

To solve this issue, simply add checking to skip shutdown for above kind of
situation.

Link: https://lore.kernel.org/r/1568780438-28753-1-git-send-email-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF

The qla2xxx driver had this issue as well when the newer array firmware
returned the retry_delay_timer in the fcp_rsp.  The bnx2fc is not handling
the masking of the scope bits either so the retry_delay_timestamp value
lands up being a large value added to the timer timestamp delaying I/O for
up to 27 Minutes.  This patch adds similar code to handle this to the
bnx2fc driver to avoid the huge delay.

Link: https://lore.kernel.org/r/1568210202-12794-1-git-send-email-loberman@redhat.com
Signed-off-by: Laurence Oberman <loberman@redhat.com>
Reported-by: David Jeffery <djeffery@redhat.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Fix the conflict between device gone and host reset

When device gone, it will check whether it is during reset, if not, it will
send internal task abort. Before internal task abort returned, reset
begins, and it will check whether SAS_PHY_UNUSED is set, if not, it will
call hisi_sas_init_device(), but at that time domain_device may already be
freed or part of it is freed, so it may referenece null pointer in
hisi_sas_init_device(). It may occur as follows:

    thread0 thread1
hisi_sas_dev_gone()
    check whether in RESET(no)
    internal task abort
    reset prep
    soft_reset
    ... (part of reset_done)
    internal task abort failed
    release resource anyway
    clear_itct
    device->lldd_dev=NULL
    hisi_sas_reset_init_all_device
check sas_dev->dev_type is SAS_PHY_UNUSED and
!device
    set dev_type SAS_PHY_UNUSED
    sas_free_device
hisi_sas_init_device
...

Semaphore hisi_hba.sema is used to sync the processes of device gone and
host reset.

To solve the issue, expand the scope that semaphore protects and let them
never occur together.

And also some places will check whether domain_device is NULL to judge
whether the device is gone. So when device gone, need to clear
sas_dev->sas_device.

Link: https://lore.kernel.org/r/1567774537-20003-14-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Add BIST support for phy loopback

Add BIST (built in self test) support for phy loopback.

Through the new debugfs interface, the user can configure loopback
mode/linkrate/phy id/code mode before enabling it. And also user can
enable/disable BIST function.

Link: https://lore.kernel.org/r/1567774537-20003-13-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation

We extract the code of memory allocate and construct an new function for
it. We think it's convenient for subsequent optimization.

Link: https://lore.kernel.org/r/1567774537-20003-12-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Remove some unused function arguments

Some function arguments are unused, so remove them.

Also move the timeout print in for wait_cmds_complete_timeout_vX_hw()
callsites into that same function.

Link: https://lore.kernel.org/r/1567774537-20003-11-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Remove redundant work declaration

Remove redundant work declaration in HISI_SAS_DECLARE_RST_WORK_ON_STACK

Link: https://lore.kernel.org/r/1567774537-20003-10-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Remove hisi_sas_hw.slot_complete

We never call hisi_sas_hw.slot_complete, so remove it.

Link: https://lore.kernel.org/r/1567774537-20003-9-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Assign NCQ tag for all NCQ commands

Currently the NCQ tag is only assigned for FPDMA READ and FPDMA WRITE
commands, and for other NCQ commands (such as FPDMA SEND), their NCQ tags
are set in the delivery command to 0.

So for all the NCQ commands, we also need to assign normal NCQ tag for
them, so drop the command type check in hisi_sas_get_ncq_tag() [drop
hisi_sas_get_ncq_tag() altogether actually], and always use the ATA command
NCQ tag when appropriate.

Link: https://lore.kernel.org/r/1567774537-20003-8-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Update all the registers after suspend and resume

After suspend and resume, the HW registers will be set back to their
initial value. We use init_reg_v3_hw() to set some registers, but some
registers are set via firmware in ACPI "_RST" method, so add reset handler
before init_reg_v3_hw().

Link: https://lore.kernel.org/r/1567774537-20003-7-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Retry 3 times TMF IO for SAS disks when init device

When init device for SAS disks, it will send TMF IO to clear disks. At that
time TMF IO is broken by some operations such as injecting controller reset
from HW RAs event, the TMF IO will be timeout, and at last device will be
gone. Print is as followed:

hisi_sas_v3_hw 0000:74:02.0: dev[240:1] found
...
hisi_sas_v3_hw 0000:74:02.0: controller resetting...
hisi_sas_v3_hw 0000:74:02.0: phyup: phy7 link_rate=10(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy0 link_rate=9(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy1 link_rate=9(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy2 link_rate=9(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy3 link_rate=9(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy6 link_rate=10(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy5 link_rate=11
hisi_sas_v3_hw 0000:74:02.0: phyup: phy4 link_rate=11
hisi_sas_v3_hw 0000:74:02.0: controller reset complete
hisi_sas_v3_hw 0000:74:02.0: abort tmf: TMF task timeout and not done
hisi_sas_v3_hw 0000:74:02.0: dev[240:1] is gone
sas: driver on host 0000:74:02.0 cannot handle device 5000c500a75a860d,
error:5

To improve the reliability, retry TMF IO max of 3 times for SAS disks which
is the same as softreset does.

Link: https://lore.kernel.org/r/1567774537-20003-6-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Remove sleep after issue phy reset if sas_smp_phy_control() fails

At expander environment, we delay after issue phy reset to wait for
hardware to handle phy reset. But if sas_smp_phy_control() fails, the
delay is unnecessary so remove it.

Link: https://lore.kernel.org/r/1567774537-20003-5-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Directly return when running I_T_nexus reset if phy disabled

At hisi_sas_debug_I_T_nexus_reset(), we call sas_phy_reset() to reset a
phy. But if the phy is disabled, sas_phy_reset() will directly return
-ENODEV without issue a phy reset request.

If so, We can directly return -ENODEV to libsas before issue a phy
reset.

Link: https://lore.kernel.org/r/1567774537-20003-4-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Use true/false as input parameter of sas_phy_reset()

When calling sas_phy_reset(), we need to specify whether the reset type
is hard reset or link reset - use true/false for clarity.

Link: https://lore.kernel.org/r/1567774537-20003-3-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: add debugfs auto-trigger for internal abort time out

This trigger is add at _hisi_sas_internal_task_abort()

Link: https://lore.kernel.org/r/1567774537-20003-2-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: virtio_scsi: unplug LUNs when events missed

The event handler calls scsi_scan_host() when events are missed, which will
hotplug new LUNs.  However, this function won't remove any unplugged LUNs.
The result is that hotunplug doesn't work properly when the number of
unplugged LUNs exceeds the event queue size (currently 8).

Scan existing LUNs when events are missed to check if they are still
present.  If not, remove them.

Link: https://lore.kernel.org/r/20190905181903.29756-1-mlupfer@ddn.com
Signed-off-by: Matt Lupfer <mlupfer@ddn.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_dh_rdac: zero cdb in send_mode_select()

cdb in send_mode_select() is not zeroed and is only partially filled in
rdac_failover_get(), which leads to some random data getting to the
device. Users have reported storage responding to such commands with
INVALID FIELD IN CDB. Code before commit 327825574132 was not affected, as
it called blk_rq_set_block_pc().

Fix this by zeroing out the cdb first.

Identified & fix proposed by HPE.

Fixes: 327825574132 ("scsi_dh_rdac: switch to scsi_execute_req_flags()")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20190904155205.1666-1-martin.wilck@suse.com
Signed-off-by: Martin Wilck <mwilck@suse.com>
Acked-by: Ales Novak <alnovak@suse.cz>
Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fcoe: fix null-ptr-deref Read in fc_release_transport

In fcoe_if_init, if fc_attach_transport(&fcoe_vport_fc_functions)
fails, need to free the previously memory and return fail, otherwise
will trigger null-ptr-deref Read in fc_release_transport.

fcoe_exit
  fcoe_if_exit
    fc_release_transport(fcoe_vport_scsi_transport)

Link: https://lore.kernel.org/r/1566279789-58207-1-git-send-email-zhengbin13@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-hisi: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Link: https://lore.kernel.org/r/20190904130457.24744-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufshcd: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Link: https://lore.kernel.org/r/20190904130348.24772-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Link: https://lore.kernel.org/r/20190904130256.24704-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Use kmemdup in ufshcd_read_string_desc()

Use kmemdup rather than duplicating its implementation

Link: https://lore.kernel.org/r/20190831124424.18642-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: arm64: dts: qcom: sdm845: Specify UFS device-reset GPIO

Specify the UFS device-reset gpio for db845c and mtp, so that the
controller will issue a reset of the UFS device.

Link: https://lore.kernel.org/r/20190828191756.24312-4-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-qcom: Implement device_reset vops

The UFS_RESET pin on Qualcomm SoCs are controlled by TLMM and exposed
through the GPIO framework. Acquire the device-reset GPIO and use this to
implement the device_reset vops, to allow resetting the attached memory.

Based on downstream support implemented by Subhash Jadavani
<subhashj@codeaurora.org>.

Link: https://lore.kernel.org/r/20190828191756.24312-3-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Introduce vops for resetting device

Some UFS memory devices needs their reset line toggled in order to get them
into a good state for initialization. Provide a new vops to allow the
platform driver to implement this operation.

Link: https://lore.kernel.org/r/20190828191756.24312-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix reset recovery paths that are not recovering

A recent patch unconditionally marks the hba as in error as part of
resetting the adapter. The driver flow that called the adapter reset was a
recovery path, which expects the adapter to not be in an error state in
order to finish the recovery.  Given the new error state being set, the
recovery fails and the adapter is left in limbo.

Revise the adapter reset routine so that it will only mark the adapter in
error if it was unable to reset the adapter.

Fixes: 8c24a4f643ed ("scsi: lpfc: Fix crash due to port reset racing vs adapter error handling")
Link: https://lore.kernel.org/r/20190903215441.10490-1-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Convert existing %pf users to %ps

Convert the remaining %pf users to %ps to prepare for the removal of the
old %pf conversion specifier support.

Fixes: 323506644972 ("scsi: lpfc: Migrate to %px and %pf in kernel print calls")
Link: https://lore.kernel.org/r/20190904160423.3865-1-sakari.ailus@linux.intel.com
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Update driver version to 10.01.00.19-k

Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20190830222402.23688-7-hmadhani@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix stale session

On fast cable pull, where driver is unable to detect device has disappeared
and came back based on switch info, qla2xxx would not re-login while remote
port has already invalidated the session.  This causes IO timeout.  This
patch would relogin to remote device for RSCN affected port.

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20190830222402.23688-6-hmadhani@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix stuck login session

Login session was stucked on cable pull. When FW is in the middle PRLI
PENDING + driver is in Initiator mode, driver fails to check back with FW to
see if the PRLI has completed. This patch would re-check with FW again to
make sure PRLI would complete before pushing forward with relogin.

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20190830222402.23688-5-hmadhani@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix driver reload for ISP82xx

HINT_MBX_INT_PENDING is not guaranteed to be cleared by firmware. Remove
check that prevent driver load with ISP82XX.

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20190830222402.23688-4-hmadhani@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix flash read for Qlogic ISPs

Use adapter specific callback to read flash instead of ISP adapter
specific.

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20190830222402.23688-3-hmadhani@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix message indicating vectors used by driver

This patch updates log message which indicates number of vectors used by
the driver instead of displaying failure to get maximum requested
vectors. Driver will always request maximum vectors during
initialization. In the event driver is not able to get maximum requested
vectors, it will adjust the allocated vectors. This is normal and does not
imply failure in driver.

Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Link: https://lore.kernel.org/r/20190830222402.23688-2-hmadhani@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sd: Improve unaligned completion resid message

For commands completing with a resid not aligned on the device logical
sector size, also print the command CDB in addition to the current message
to help debug hardware generating such incorrect command completion
information.

Link: https://lore.kernel.org/r/20190828053511.14818-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: fix msix interrupt allocation

pci_alloc_irq_vectors() returns number of vectors allocated.  Fix the check
for error condition.

Fixes: cca678dfbad49 ("scsi: fnic: switch to pci_alloc_irq_vectors")
Link: https://lore.kernel.org/r/20190827211340.1095-1-gvaradar@cisco.com
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Acked-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: print port speed only at driver init or speed change

Port speed printing was added by commit d948e6383ec3 ("scsi: fnic: Add port
speed stat to fnic debug stats"). As currently configured, this will cause
the port speed to be printed to syslog every 2 seconds. To prevent log
spamming, only print the vnic port speed at driver initialization and if
the speed changes. Also clean up a small typo in fnic_trace.c.

Fixes: d948e6383ec3 ("scsi: fnic: Add port speed stat to fnic debug stats")
Signed-off-by: John Pittman <jpittman@redhat.com>
Reviewed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2fc: remove set but not used variables 'task','port','orig_task'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/bnx2fc/bnx2fc_hwi.c: In function bnx2fc_process_unsol_compl:
drivers/scsi/bnx2fc/bnx2fc_hwi.c:636:30: warning: variable task set but not used [-Wunused-but-set-variable]
drivers/scsi/bnx2fc/bnx2fc_hwi.c: In function bnx2fc_process_ofld_cmpl:
drivers/scsi/bnx2fc/bnx2fc_hwi.c:1125:21: warning: variable port set but not used [-Wunused-but-set-variable]
drivers/scsi/bnx2fc/bnx2fc_hwi.c: In function bnx2fc_init_seq_cleanup_task:
drivers/scsi/bnx2fc/bnx2fc_hwi.c:1468:30: warning: variable orig_task set but not used [-Wunused-but-set-variable]

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2fc: remove set but not used variables 'lport','host'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/bnx2fc/bnx2fc_io.c: In function bnx2fc_initiate_seq_cleanup:
drivers/scsi/bnx2fc/bnx2fc_io.c:932:19: warning: variable lport set but not used [-Wunused-but-set-variable]
drivers/scsi/bnx2fc/bnx2fc_io.c: In function bnx2fc_initiate_cleanup:
drivers/scsi/bnx2fc/bnx2fc_io.c:1001:19: warning: variable lport set but not used [-Wunused-but-set-variable]
drivers/scsi/bnx2fc/bnx2fc_io.c: In function bnx2fc_process_scsi_cmd_compl:
drivers/scsi/bnx2fc/bnx2fc_io.c:1882:20: warning: variable host set but not used [-Wunused-but-set-variable]

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2fc: remove set but not used variable 'fh'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function bnx2fc_rcv:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:431:26: warning: variable fh set but not used [-Wunused-but-set-variable]

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Update the version to 8.42.3.0

Update the driver version to 8.42.3.0.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Fix race betwen fipvlan request and response path

There is a race b/w fipvlan request and response path:

=====
qedf_fcoe_process_vlan_resp:113]:2: VLAN response, vid=0xffd.
qedf_initiate_fipvlan_req:165]:2: vlan = 0x6ffd already set.
qedf_set_vlan_id:139]:2: Setting vlan_id=0ffd prio=3.
======

The request thread sees that vlan is already set and fails to call
ctrl_link_up.

Fix:

 - While setting vlan_id use local variable and before setting vlan_id.

 - Call fcoe_ctlr_link_up in next iteration of fipvlan request.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Use discovery list to traverse rports

The list of rports might become stale so we should rather traverse the
discovery list when trying relogin.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Decrease the LL2 MTU size to 2500

Decrease the LL2 MTU size to 2500.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Check for module unloading bit before processing link update AEN

Prevent race where we're removing the module and we get link update

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Initiator fails to re-login to switch after link down

Problem Statement:

 - Driver has fc_id of 0xcc0200

 - Driver gets link down (due to test) and calls fcoe_ctlr_link_down().

 - At this point, the fc_id of the initiator port is zeroed out.

 - Driver gets a link up 14 seconds later.

 - Driver performs FIP VLAN request, gets a response from the switch.

 - No change in VLAN is detected.

 - Driver then notifies libfcoe via fcoe_ctlr_link_up().

 - Libfcoe then issues a multicast discovery solicitation as expected.

 - Cisco FCF responds to that correctly.

 - Libfcoe at this point starts a 3 sec count-down to allow any other FCFs
   to be discovered. However, at this point, it has been 20 seconds since
   the last FKA from the driver (which would have been sent prior to
   backlink toggle), which causes the CVL to be issued from Cisco CVL from
   the switch is dropped by the driver as the vx_port identification
   descriptor is present and has value of 0xcc0200, which does not match
   the driver's value of 0.  Libfcoe completes the 3 sec count down and
   proceeds to issue FLOGI as per protocol.  Switch rejects FLogi request.
   All subsequent FLOGI requests from libfc are rejected by the switch
   (possibly because it is now expecting a new solicitation).  This
   situation will continue until the next link toggle.

Solution:

The Vx_port descriptor in the CVL has three fields:

MAC address
Fabric ID
Port Name

Today, the code checks for both #1 and #2 above. In the case where we went
through a link down, both these will be zero until FLOGI succeeds.

We should change our code to check if any one of these 3 is valid and if
so, handle the CVL (basically switching from AND to OR). The port name
field is definitely expected to be valid always.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Add debug information for unsolicited processing

Log s_id, d_id, type and command to the log message.

[mkp: fixed warning]

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Add support for 20 Gbps speed

The current code doeesn't support 20Gbps speed for current and supported
speed. Add support for it.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Interpret supported caps value correctly

Driver was wrongly interpreting the supported cap value returned by qed.

Solution: Use QED define macros instead of OS defined for interpreting
supporting speeds.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Add shutdown callback handler

Add shutdown callback handler.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Update module description string

Update module description.

Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Fix crash during sg_reset

Driver was attempting to print cdb[0], which is not set for resets coming
from SCSI ioctls. Check for cmd_len before accessing cmnd.

Crash info:
[84790.864747] BUG: unable to handle kernel NULL pointer dereference at (null)
[84790.864783] IP: qedf_initiate_tmf+0x7a/0x6e0 [qedf]
[84790.865204] Call Trace:
[84790.865246]  scsi_try_target_reset+0x2b/0x90 [scsi_mod]
[84790.865266]  scsi_ioctl_reset+0x20f/0x2a0 [scsi_mod]
[84790.865284]  scsi_ioctl+0x131/0x3a0 [scsi_mod]

Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Stop sending fipvlan request on unload

 - On some setups fipvlan can be retried for long duration and the
   connection to switch was not there so it was not getting any reply.

 - During unload this thread was hanging.

Problem Resolution:

Check if unload is in progress, then quit from fipvlan thread.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Print message during bailout conditions

Print messages during exiting condition to help debugging.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: bump version

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Gerry Morong <gerry.morong@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: update copyright

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add new pci ids

Add:

      PM8222               VID_9005, DID_028F, SVID_1BD4 and SDID_004F
      3101E-4i (1G, no GB) VID_9005, DID_028F, SVID_9005 and SDID_0808
      3102E-8i (2G, no GB) VID_9005, DID_028F, SVID_9005 and SDID_0809

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Gilbert Wu <gilbert.wu@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: correct REGNEWD return status

Return -EINPROGRESS when a rescan worker is queued.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add gigabyte controller

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Gilbert Wu <gilbert.wu@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: correct hang when deleting 32 lds

When each ld is deleted, a rescan event is triggered in the driver. These
can stack up waiting on mutex_lock.

Change to mutex_try_lock and schedule a rescan for later.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add bay identifier

Return identify physical device "Phys_Bay_in_Box" as bay_identifier.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Gilbert Wu <gilbert.wu@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add sysfs entries

 - serial number
 - model
 - vendor

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add module param to hide vsep

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add pci ids for fiberhome controller

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Gilbert Wu <gilbert.wu@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add module param for exposure order

Expose physical devices before logical devices.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Gilbert Wu <gilbert.wu@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: fix 12.4.0.0 GPF at boot

The 12.4.0.0 patch that merged WQ/CQ pairs into single per-cpu pair
contained a bug: a local variable was set to the queue pair by index.  This
should have allowed the local variable to be natively used.  Instead, the
code reused the index relative to the local variable, obtaining a random
pointer value that when used eventually faulted the system

Convert offending code to use local variable.

Fixes: c00f62e6c546 ("scsi: lpfc: Merge per-protocol WQ/CQ pairs into single per-cpu pair")
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Remove bg debugfs buffers

Capturing and downloading dif command data and dif data was done a dozen
years ago and no longer being used. Also creates a potential security hole.

Remove the debugfs buffer for dif debugging.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
CC: KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>
CC: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Resolve checker warning for lpfc_new_io_buf()

Per Dan Carpenter:

The patch d79c9e9d4b3d: "scsi: lpfc: Support dynamic unbounded SGL lists on
G7 hardware." from Aug 14, 2019, leads to the following static checker
warning:

   drivers/scsi/lpfc/lpfc_init.c:4107 lpfc_new_io_buf()
  error: not allocating enough data 784 vs 768

There was no need to compare sizes nor to allocate size based on a define.

Change allocation to use actual structure length

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: remove set but not used variable 'val'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/ufs/ufs-qcom.c: In function ufs_qcom_pwr_change_notify:
drivers/scsi/ufs/ufs-qcom.c:808:6: warning: variable val set but not used [-Wunused-but-set-variable]

Fixes: 1e1e465c6d23 ("scsi/ufs: qcom: Remove ufs_qcom_phy_*() calls from host")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: fix spelling mistake "initializatin" -> "initialization"

There is a spelling mistake in a ql_log message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: remove set but not used variable 'irq_value'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/hisi_sas/hisi_sas_v1_hw.c: In function cq_interrupt_v1_hw:
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:1542:6: warning: variable irq_value set but not used [-Wunused-but-set-variable]

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Introduce module parameter to override queue depth

This patch provides a module parameter and sysfs interface to select
whether the queue depth for each device should be based on the
protocol-specific value set by the driver (the default) or the maximum
supported by the controller (can_queue).

Although we have a sysfs interface per sdev to change the queue depth
of individual scsi devices, this implementation provides a single
sysfs entry per shost to switch between the controller max and the
driver default.

[mkp: tweaked commit desc]

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix a recently introduced kernel warning

According to the firmware documentation a status type 0 IOCB can be
followed by one or more status continuation type 0 IOCBs. Hence do not
complain if the completion function is not called from inside the status
type 0 IOCB handler.

WARNING: CPU: 10 PID: 425 at drivers/scsi/qla2xxx/qla_isr.c:2784
qla2x00_status_entry.isra.7+0x484/0x17b0 [qla2xxx]
CPU: 10 PID: 425 Comm: kworker/10:1 Tainted: G            E     5.3.0-rc4-next-20190813-autotest-autotest #1
Workqueue: qla2xxx_wq qla25xx_free_rsp_que [qla2xxx]
Call Trace:
 qla2x00_status_entry.isra.7+0x1484/0x17b0 [qla2xxx] (unreliable)
 qla24xx_process_response_queue+0x7d8/0xbd0 [qla2xxx]
 qla25xx_free_rsp_que+0x1a0/0x220 [qla2xxx]
 process_one_work+0x25c/0x520
 worker_thread+0x8c/0x5e0
 kthread+0x154/0x1a0
 ret_from_kernel_thread+0x5c/0x7c

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: fix broken hba->outstanding_tasks

Currently bits in hba->outstanding_tasks are cleared only after their
corresponding task management commands are successfully done by
__ufshcd_issue_tm_cmd().

If timeout happens in a task management command, its corresponding bit in
hba->outstanding_tasks will not be cleared until next task management
command with the same tag used successfully finishes.

This is wrong and can lead to some issues, like power issue.  For example,
ufshcd_release() and ufshcd_gate_work() will do nothing if
hba->outstanding_tasks is not zero even if both UFS host and devices are
actually idle.

Solution is referred from error handling of device commands: bits in
hba->outstanding_tasks shall be cleared regardless of their execution
results.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fcoe: remove redundant call to skb_transport_header

Pointer fh is being assigned a return value from the call to
skb_transport_header however this value is never read and fh is being
re-assigned immediately afterwards with a new value.  Since there are
side-effects from calling skb_transport_header the call is redundant and
can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Disable local LCC in .link_startup_notify() in Cadence UFS

Some UFS devices have issues if LCC is enabled. So we are setting
PA_LOCAL_TX_LCC_Enable to 0 before link startup which will make sure that
both host and device TX LCC are disabled once link startup is completed.

Signed-off-by: Anil Varughese <aniljoy@cadence.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: remove redundant assignment to variable error

Variable error is being initialized with a value that is never read and
error is being re-assigned a little later on. The assignment is redundant
and hence can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Update lpfc version to 12.4.0.0

Update lpfc version to 12.4.0.0

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Merge per-protocol WQ/CQ pairs into single per-cpu pair

Currently, each hardware queue, typically allocated per-cpu, consists of a
WQ/CQ pair per protocol. Meaning if both SCSI and NVMe are supported 2
WQ/CQ pairs will exist for the hardware queue. Separate queues are
unnecessary. The current implementation wastes memory backing the 2nd set
of queues, and the use of double the SLI-4 WQ/CQ's means less hardware
queues can be supported which means there may not always be enough to have
a pair per cpu. If there is only 1 pair per cpu, more cpu's may get their
own WQ/CQ.

Rework the implementation to use a single WQ/CQ pair by both protocols.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add NVMe sequence level error recovery support

FC-NVMe-2 added support for sequence level error recovery in the FC-NVME
protocol. This allows for the detection of errors and lost frames and
immediate retransmission of data to avoid exchange termination, which
escalates into NVMeoFC connection and association failures. A significant
RAS improvement.

The driver is modified to indicate support for SLER in the NVMe PRLI is
issues and to check for support in the PRLI response.  When both sides
support it, the driver will set a bit in the WQE to enable the recovery
behavior on the exchange. The adapter will take care of all detection and
retransmission.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Support dynamic unbounded SGL lists on G7 hardware.

Typical SLI-4 hardware supports up to 2 4KB pages to be registered per XRI
to contain the exchanges Scatter/Gather List. This caps the number of SGL
elements that can be in the SGL. There are not extensions to extend the
list out of the 2 pages.

The G7 hardware adds a SGE type that allows the SGL to be vectored to a
different scatter/gather list segment. And that segment can contain a SGE
to go to another segment and so on.  The initial segment must still be
pre-registered for the XRI, but it can be a much smaller amount (256Bytes)
as it can now be dynamically grown.  This much smaller allocation can
handle the SG list for most normal I/O, and the dynamic aspect allows it to
support many MB's if needed.

The implementation creates a pool which contains "segments" and which is
initially sized to hold the initial small segment per xri. If an I/O
requires additional segments, they are allocated from the pool.  If the
pool has no more segments, the pool is grown based on what is now
needed. After the I/O completes, the additional segments are returned to
the pool for use by other I/Os. Once allocated, the additional segments are
not released under the assumption of "if needed once, it will be needed
again". Pools are kept on a per-hardware queue basis, which is typically
1:1 per cpu, but may be shared by multiple cpus.

The switch to the smaller initial allocation significantly reduces the
memory footprint of the driver (which only grows if large ios are
issued). Based on the several K of XRIs for the adapter, the 8KB->256B
reduction can conserve 32MBs or more.

It has been observed with per-cpu resource pools that allocating a resource
on CPU A, may be put back on CPU B. While the get routines are distributed
evenly, only a limited subset of CPUs may be handling the put routines.
This can put a strain on the lpfc_put_cmd_rsp_buf_per_cpu routine because
all the resources are being put on a limited subset of CPUs.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add MDS driver loopback diagnostics support

Added code to support driver loopback with MDS Diagnostics.  This style of
diagnostics passes frames from the fabric to the driver who then echo them
back out the link.  SEND_FRAME WQEs are used to transmit the frames.  Added
the SOF and EOF field location definitions for use by SEND_FRAME.

Also ensure that enable_mds_diags is a RW parameter.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add first and second level hardware revisions to sysfs reporting

To aid better hardware detection when there are issues, report the first
and second level hardware revisions from the READ_REV command.  Add the
elements to the existing hardware id string.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Migrate to %px and %pf in kernel print calls

In order to see real addresses, convert %p with %px for kernel addresses
and replace %p with %pf for functions.

While converting, standardize on "x%px" throughout (not %px or 0x%px).

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add simple unlikely optimizations to reduce NVME latency

While performing code review, several relatively simple optimizations can
be done in the fast path.

Add these optimizations (unlikely designators).

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix coverity warnings

Running on Coverity produced the following errors:

 - coding style (indentation)

 - memset size mismatch errors
   note: comment cases where it is purposely a mismatch

Fix the errors.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix nvme first burst module parameter description

modinfo for lpfc_nvme_enable_fb is incorrect. FirstBurst on lpfc target is
not fully supported.

Update the attribute description

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix BlockGuard enablement on FCoE adapters

The driver is allowing the user to change lpfc_enable_bg while loading the
driver against a FCoE adapter. This is not supported.

No check is made for the adapter type when applying the blockguard
enablement value.

Fix by verifying the adapter type before setting the enablement flag.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix reported physical link speed on a disabled trunked link

GetTrunkInfo is displaying an incorrect link speed when the link is a trunk
and the link has gone down.  The driver is not clearing the logical speed
as part of the link down transition.

Fix by setting the logical speed to UNKNOWN SPEED when the link goes down.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix Max Frame Size value shown in fdmishow output

Max Frame Size value is shown as 34816 in fdmishow from Switch.

The driver uses bbRcvSize in common service param which is obtained from
the READ_SPARM mailbox command. The bbRcvSize field which is displayed is a
three nibble field but the driver is printing a full four nibbles.

Fix by masking off the upper nibble.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix upcall to bsg done in non-success cases

The scsi transport fc bsg interface does not expect the bsg_job_done()
callback to be done if the bsg request call returns failure. Several of the
HST_VENDOR cases in the driver unconditionally call bsg_job_done()
regardless of the returning value.

Fix the code to only call bsg_job_done() if the call to lpfc_bsg_request()
will return success.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>