John Crispin [Fri, 2 Oct 2015 10:49:45 +0000 (10:49 +0000)]
ramips: make pinctrl work on newer socs
newer socs have 2 mux registers
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46952
SVN-Revision: 47088
John Crispin [Fri, 2 Oct 2015 10:49:31 +0000 (10:49 +0000)]
ramips: make the mt7628 spi driver work for both cs lines
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46951
SVN-Revision: 47087
John Crispin [Fri, 2 Oct 2015 10:49:16 +0000 (10:49 +0000)]
ramips: make the early_printk code detect which uart is used
only tested on mt7628
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46950
SVN-Revision: 47086
John Crispin [Fri, 2 Oct 2015 10:49:09 +0000 (10:49 +0000)]
rpcd: update to latest git HEAD
Provides ubus calls for sysupgrade and password changing.
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47075
SVN-Revision: 47085
John Crispin [Fri, 2 Oct 2015 10:48:57 +0000 (10:48 +0000)]
uci: update to the latest version, adds various fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46738
SVN-Revision: 47084
John Crispin [Fri, 2 Oct 2015 10:48:51 +0000 (10:48 +0000)]
fstools: update to latest git revision
jffs2reset was following symlinks making it delete mounts for example.
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46960
SVN-Revision: 47083
John Crispin [Fri, 2 Oct 2015 10:48:48 +0000 (10:48 +0000)]
mountd: move code to a git repo
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46935
SVN-Revision: 47082
John Crispin [Thu, 1 Oct 2015 14:16:40 +0000 (14:16 +0000)]
CC: ramips: Added WIZnet WizFi630A Platfrom based on Ralink RT5350
This patch is to add the WIZnet WizFi630A board as a new platform. The board is in mini pci express form factor.
Signed-off-by: Tobias Welz <tw@wiznet.eu>
This is a backport of patch r46921
SVN-Revision: 47072
John Crispin [Thu, 1 Oct 2015 14:16:37 +0000 (14:16 +0000)]
bzip2: add host build
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46470
SVN-Revision: 47071
Rafał Miłecki [Mon, 28 Sep 2015 09:39:47 +0000 (09:39 +0000)]
hostapd: check for banned client on association event
When using FullMAC drivers (e.g. brcmfmac) we don't get mgmt frames so
check for banned client in probe request handler won't ever be used.
Since cfg80211 provides us info about STA associating let's put a check
there.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r47064
SVN-Revision: 47065
Felix Fietkau [Sun, 27 Sep 2015 10:54:39 +0000 (10:54 +0000)]
igmpproxy: fix spurious restarts on interface events, pass used netdevs to procd instead
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47055
SVN-Revision: 47060
Felix Fietkau [Sat, 26 Sep 2015 23:18:56 +0000 (23:18 +0000)]
netifd: update to the latest version, fixes spurious client isolation in unbridged AP configurations (#20574)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47053
SVN-Revision: 47054
Felix Fietkau [Sat, 26 Sep 2015 21:11:16 +0000 (21:11 +0000)]
bison: replace the yacc script with one that does not hardcode the path (fixes #20605)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47050
SVN-Revision: 47051
Felix Fietkau [Thu, 24 Sep 2015 16:07:34 +0000 (16:07 +0000)]
kernel: backport some SPI layer improvements from 4.1 to 3.18, significantly improves flash speed on ramips
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47045
SVN-Revision: 47046
Felix Fietkau [Thu, 24 Sep 2015 15:43:24 +0000 (15:43 +0000)]
ath9k: fix handling of tx headroom for padding
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47042
SVN-Revision: 47044
Rafał Miłecki [Wed, 23 Sep 2015 11:55:18 +0000 (11:55 +0000)]
base-files: sysupgrade: quote source image name
get_image() eval a filename without quoting it, resulting in errors with
filenames containing characters that need to be escaped.
$ sysupgrade -T -f ./cfg\(12\).tar.gz img.bin; echo $?
Image check 'platform_check_image' failed.
Invalid config file. Please use only .tar.gz files
1
$ mv cfg\(12\).tar.gz cfg_12.tar.gz
$ mv img\(1\).bin img.bin
sysupgrade -T -f ./cfg_12.tar.gz img.bin; echo $?
0
Enclose the content of $from in double quotes.
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Backport of r46919
SVN-Revision: 47028
Felix Fietkau [Tue, 22 Sep 2015 11:29:00 +0000 (11:29 +0000)]
kernel: add a patch to fix crashes on pppoe disconnect/reconnect
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47026
SVN-Revision: 47027
Felix Fietkau [Mon, 21 Sep 2015 17:43:12 +0000 (17:43 +0000)]
base-files: fix ramoverlay function with kernels 3.18+
Even though there are not many users left within the OpenWrt tree it seems
this function broke during the kernel 3.18 transition.
Fix it by providing a workdir as required by overlayfs.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Backport of r47015
SVN-Revision: 47016
Felix Fietkau [Mon, 21 Sep 2015 17:19:08 +0000 (17:19 +0000)]
tools/mtd-utils: fix PKG_MIRROR_MD5SUM
The checksum doesn't match the file on mirror2.openwrt.org.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Backport of r47010
SVN-Revision: 47011
Felix Fietkau [Fri, 18 Sep 2015 12:47:46 +0000 (12:47 +0000)]
mips: Free memory when load_module fails (#14453)
The mips reloc patch introduced new allocations which were done before
add_unformed_module but never freed them in case of an error. A new hook in
Linux 3.19 called module_arch_freeing_init can be used for freeing memory
which were allocated during this init phase.
The problem can be seen when trying to load a module (via busybox insmod)
when it was already loaded.
free -m
for i in `seq 1 100`; do
/sbin/insmod /lib/modules/*/ath9k.ko >& /dev/null
done
free -m
This simple loop would leak ~3.2 MB.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Backport of r46247
SVN-Revision: 47004
Felix Fietkau [Fri, 18 Sep 2015 12:47:31 +0000 (12:47 +0000)]
kernel: bridge, multicast-to-unicast: fix echoes on STA
Currently, multicast packets from an STA are sent to any according
multicast listener directly through the bridge multicast-to-unicast
feature. Unfortunately, so far this includes the originating STA, too,
resulting in multicast packets being echo'ed back to the originating STA
if it itself is a multicast listener for that group.
This behaviour breaks IPv6 duplicate address detection: An IPv6 Neighbor
Solicitation for IPv6 Duplicate Address Detection is being echo'ed back,
resulting in the host falsely detecting an address collision, which
makes the node unable to claim an IPv6 address and use IPv6 in general.
Mac80211 unfortunately only prevents the echoes for us for multicast
frames. For the multicast frames cast to a unicast destination we'll
need to take care of excluding the originator ourselves.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Backport of r46765
SVN-Revision: 47003
Felix Fietkau [Fri, 18 Sep 2015 12:47:20 +0000 (12:47 +0000)]
generic: Fix per interface nf_call_iptables setting
commit r30917 ("kernel: bypass all netfilter hooks if the sysctls for that
functionality have been disabled - eliminates the overhead of enabling
CONFIG_BRIDGE_NETFILTER in the kernel config") introduced an optimization
which should reduce/eliminate the overhead for traffic send over bridges on
kernels compiled with CONFIG_BRIDGE_NETFILTER=y. But this optimization
breaks the nf_call_iptables per bridge setting which is more fine grained
than the global sysctl net.bridge.bridge-nf-call-iptables setting.
A test reflecting a real world setup was created to identify if this really
eliminates the overhead and if per-bridge nf_call_iptables could be used in
some setups to increase the throughput. A Qualcomm Atheros QCA9558 based
system with one ethernet and an ath9k wifi 3x3 in HT40 mode was used.
Cables from the AP to the wifi station were used to reduce interference
problems during the tests.
The wlan interface was put in one bridge interface called br-wlan. This
bridge usually contains some more wlan interfaces. The eth0 was put in a
second bridge called br-lan. This usually contains some other privileged
wlan or mesh interfaces. Routing was added between br-lan and br-wlan.
Three kernels were tested:
* (default) OpenWrt kernel for this device
* (brfilter-global) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y
* (brfilter-local) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y and
without 644-bridge_optimize_netfilter_hooks.patch
The changes to the the netfilter settings of the bridge were done via:
* (brfilter-global) /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=1
* (brfilter-lobal) echo 1 > /sys/class/net/br-lan/bridge/nf_call_iptables
and/or echo 1 > /sys/class/net/br-wan/bridge/nf_call_iptables
A station connected to the wlan0 (AP) interface was used to send traffic to
a PC connected via ethernet. iperf with 3 concurrent transmissions was used
to generate the traffic.
| kernel | br-nf-* global | nf-call* iface | download | upload |
|-----------------|----------------|----------------|----------|----------|
| default | 0 | - | 209 | 268 |
| brfilter-global | 0 | - | 185 | 243 |
| brfilter-local | 0 | - | 187 | 243 |
| brfilter-local | 0 | br-lan | 157 | 226 |
| brfilter-local | 0 | br-lan br-wlan | 139 | 161 |
| brfilter-global | 1 | - | 136 | 162 |
Download/upload results in Mibit/s
It can be seen that the patch doesn't eliminate the overhead. It can also
be seen that the throughput of brfilter-global and brfilter-local with
disabled filtering is the roughly the same. Also the throughput for
brfilter-global and brfilter-local for enabled filtering on all bridges is
roughly the same.
But also the brfilter-local throughput is higher when only br-lan requires
the filtering. This setting would not be possible with
644-bridge_optimize_netfilter_hooks.patch applied and thus can only be
compared with brfilter-global and filtering enabled for all interfaces.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Backport of r46835
SVN-Revision: 47002
Felix Fietkau [Fri, 18 Sep 2015 12:47:10 +0000 (12:47 +0000)]
kernel: bridge, multicast-to-unicast: assign src after pskb_may_pull()
A call to pskb_may_pull() might reallocate skb->data. Therefore we
should only assign the src-pointer after any potential reallocations.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46721
SVN-Revision: 47001
Felix Fietkau [Fri, 18 Sep 2015 12:46:59 +0000 (12:46 +0000)]
Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)"
This reverts commit
a080e8e1943156168913d0353a2e99d1151102aa.
It did not fix the problem but just hid some symptom. The real issue was
that IGMP/MLD report suppression was not considered for the
multicast-to-unicast feature. A recent netifd which isolates IGMP/MLD
reports between STAs by utilizing AP-isolation and bridge-hairpinning
should have fixed this.
It is perfectly fine to apply multicast-to-unicast to IPv6 Neighbor
Solicitations, too (once that feature is configured correctly).
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46720
SVN-Revision: 47000
Felix Fietkau [Fri, 18 Sep 2015 12:46:50 +0000 (12:46 +0000)]
netifd: update to the latest version (as of trunk r46841)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46999
Felix Fietkau [Thu, 17 Sep 2015 17:21:16 +0000 (17:21 +0000)]
procd: update to latest git revision
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46962
SVN-Revision: 46996
Felix Fietkau [Thu, 17 Sep 2015 16:42:53 +0000 (16:42 +0000)]
kernel: solos-pci: Increase headroom on received packets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46993
SVN-Revision: 46995
Felix Fietkau [Thu, 17 Sep 2015 16:42:49 +0000 (16:42 +0000)]
kernel: ipv6: ip6_fragment: fix headroom tests and skb leak
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46992
SVN-Revision: 46994
Jo-Philipp Wich [Thu, 17 Sep 2015 15:32:31 +0000 (15:32 +0000)]
CC: firewall: depend on kmod-ipt-conntrack (#20542)
Our ruleset requires kernel support for conntrack state matching, therfore
depend on the require kmod. Fixes #20542.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46990
SVN-Revision: 46991
Felix Fietkau [Thu, 17 Sep 2015 10:16:41 +0000 (10:16 +0000)]
x86/geode: enable DMI and Geos support (fixes #20512)
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Backport of r46986
SVN-Revision: 46988
Felix Fietkau [Thu, 17 Sep 2015 10:16:38 +0000 (10:16 +0000)]
x86: fix Geode LX timekeeping (#20531)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46985
SVN-Revision: 46987
Steven Barth [Tue, 15 Sep 2015 14:56:43 +0000 (14:56 +0000)]
ppp: backport use a more reliable way to set script environment
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46943
Felix Fietkau [Mon, 14 Sep 2015 16:50:47 +0000 (16:50 +0000)]
base-files: replace the opkg key with the one used for the final image
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46910
Felix Fietkau [Mon, 14 Sep 2015 06:57:07 +0000 (06:57 +0000)]
ramips: fix chunked-io support for big flash chips (#20504)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46904
SVN-Revision: 46905
Rafał Miłecki [Mon, 14 Sep 2015 06:14:41 +0000 (06:14 +0000)]
bcm53xx: add NAND flash chip description for Asus RT-AC87U
This isn't that important due to different NAND driver but keeps DTS and
backports consistent.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Inspired by r46892 (trunk).
SVN-Revision: 46902
Felix Fietkau [Sun, 13 Sep 2015 20:46:00 +0000 (20:46 +0000)]
ath10k: reduce dma burst size on newer firmware to fix crashes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46900
SVN-Revision: 46901
Rafał Miłecki [Fri, 11 Sep 2015 12:09:00 +0000 (12:09 +0000)]
kernel: drop some left XHCI patch for 4.0
It was accidentally added in r46094.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46849
Jonas Gorski [Fri, 11 Sep 2015 10:48:42 +0000 (10:48 +0000)]
CC: opkg: ensure image provided feeds are available after sysupgrade
Split the opkg.conf into three files, to make it easier to support custom
feeds and configs:
* /etc/opkg.conf -> base opkg configuration
* /etc/opkg/distfeeds.conf -> default Openwrt package feeds
* /etc/opkg/customfeeds.conf -> custom package feeds
Of these three, only the base opkg.conf and the customfeeds.conf is marked
as to be kept, so that the distfeeds.conf from the image is always used.
To ease migration, a script is added that moves any feeds from /etc/opkg.conf
to /etc/opkg/customfeeds.conf on first boot.
Also ensure that any keys used for verification are also kept in upgrade.
Backport of r46491.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46848
Jonas Gorski [Fri, 11 Sep 2015 10:48:34 +0000 (10:48 +0000)]
CC: kernel: update 3.18 to 3.18.21
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46847
Felix Fietkau [Fri, 11 Sep 2015 08:49:42 +0000 (08:49 +0000)]
ipq806x: delete from CC branch; it is broken and unsupported
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46845
Felix Fietkau [Tue, 8 Sep 2015 14:31:41 +0000 (14:31 +0000)]
kernel: restore 640-bridge_no_eap_forward.patch to its original form
It was corrupted in r38528. The most obvious symptom is repeated messages like this:
Tue Sep 8 08:25:18 2015 kern.warn kernel: [77141.972226] br-lan: received packet on wlan0 with own address as source address
Signed-off-by: Dmitry Ivanov <dima@ubnt.com>
Backport of r46821
SVN-Revision: 46822
Rafał Miłecki [Tue, 8 Sep 2015 06:01:04 +0000 (06:01 +0000)]
brcm47xx: apply serial flash size trick to Netgear WNR1000 V3
It also uses different block size just like WGR614 V10.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46810
SVN-Revision: 46812
Rafał Miłecki [Tue, 8 Sep 2015 06:00:59 +0000 (06:00 +0000)]
brcm47xx: add Netgear WNR1000 V3 support in the Linux arch code
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46805
SVN-Revision: 46811
Felix Fietkau [Mon, 7 Sep 2015 19:19:25 +0000 (19:19 +0000)]
uhttpd: update to the latest version, fixes deferred cgi script processing (#20458)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46807
SVN-Revision: 46808
Felix Fietkau [Wed, 2 Sep 2015 09:26:22 +0000 (09:26 +0000)]
ramips: fix devicetree corruption with some boot loaders if the caches are not ready at boot
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46766
SVN-Revision: 46767
Hauke Mehrtens [Sat, 29 Aug 2015 20:32:26 +0000 (20:32 +0000)]
CC: hostapd: properly enable 802.11w support
backport of r46737
Add CONFIG_IEEE80211W variable to DRIVER_MAKEOPTS so that 802.11w
support is properly compiled in full variant.
This fixes #20179
Signed-off-by: Janusz Dziemidowicz <rraptorr@nails.eu.org>
SVN-Revision: 46751
Hauke Mehrtens [Sat, 29 Aug 2015 20:05:41 +0000 (20:05 +0000)]
CC: broadcom-wl: add interface after bridge is up
backport of r46749
Without this patch adding the wifi device to the bridge may fail
because the bridge is not already configured when the wifi device gets
configured. This patch makes broadcom-wl wait till the bridge is ready.
This fixes #17262
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46750
Hauke Mehrtens [Sat, 29 Aug 2015 17:40:11 +0000 (17:40 +0000)]
CC: broadcom-wl: fix bash comparison error
Backport of r46746
This fixes #17495
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46748
Hauke Mehrtens [Sat, 29 Aug 2015 17:39:36 +0000 (17:39 +0000)]
CC: broadcom-wl: fix section mismatches in broadcom-wl driver
Backport of r46745
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46747
Rafał Miłecki [Sat, 29 Aug 2015 09:28:31 +0000 (09:28 +0000)]
brcm47xx: fix Linksys E1200 V2 image filename
Drop unwanted suffix (copy & paste mistake).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46742
SVN-Revision: 46743
Rafał Miłecki [Thu, 27 Aug 2015 14:58:00 +0000 (14:58 +0000)]
mac80211: add pending brcmfmac patch fixing warm reboots
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46739
SVN-Revision: 46740
Rafał Miłecki [Wed, 26 Aug 2015 22:57:54 +0000 (22:57 +0000)]
mac80211: update brcmfmac to the latest version
This also adds one patchset of pending changes that fix support for
multiple interfaces. It was somehow broken.
Driver couldn't correctly match firmware and system interfaces resulting
in not working APs and WARNINGs.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46736
Rafał Miłecki [Wed, 26 Aug 2015 22:57:29 +0000 (22:57 +0000)]
mac80211: group last brcmfmac changes into (half) patchset
This prepares some place for backporting extra patches.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46735
Rafał Miłecki [Wed, 26 Aug 2015 16:20:39 +0000 (16:20 +0000)]
bcm53xx: add support for Netgear R7000
Backport of r46363 r46730 r46731 r46732.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46733
Jonas Gorski [Wed, 26 Aug 2015 13:04:13 +0000 (13:04 +0000)]
CC: brcm63xx: fix WAP-5813n default network config
/etc/uci-defaults/02_network had a typo, making it generate the wrong
network config.
Closes #20407.
Backport of r46727.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46728
Jonas Gorski [Sun, 23 Aug 2015 13:37:42 +0000 (13:37 +0000)]
CC: mvebu: kirkwood: fix ehci-orion probe if generic-phy isn't enabled
Properly treat -ENOSYS as no PHY, else ehci-orion won't work without
generic phy support.
Backport of r46711.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46712
Jonas Gorski [Sun, 23 Aug 2015 09:41:27 +0000 (09:41 +0000)]
CC: mac80211: disable ipw2x00 for big endian targets
The ipw2x00 drivers assume that the system they are running is little
endian, and access everything in native byte order. When run on a big
endian system, everything breaks apart.
Since fixing this is non trivial on a first glance, disable them for
big endian targets.
Backport of r46708.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46710
Jonas Gorski [Sun, 23 Aug 2015 09:41:07 +0000 (09:41 +0000)]
CC: brcm63xx: ensure dummy byte is set for mapped spi flash with fast read
Some CFEs seem to misconfigure the mapped memory flash access with
fast read but without a dummy byte, causing all accesses to be prefixed
with 0xff.
This of course breaks reading out the nvram, so do not just move back to
single i/o accessors, but also ensure that the dummy byte is correctly
set.
Backport of r46707.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46709
Imre Kaloz [Fri, 21 Aug 2015 08:06:07 +0000 (08:06 +0000)]
mvebu: fix cobra chainmask (backport of r46697)
Thanks Sebastian for spotting it.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46698
Imre Kaloz [Thu, 20 Aug 2015 20:45:16 +0000 (20:45 +0000)]
mwlwifi: downgrade to 10.3.0.3-
20150804
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46695
Imre Kaloz [Wed, 19 Aug 2015 08:44:26 +0000 (08:44 +0000)]
mwlwifi: fix commit hash for 10.3.0.8
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46692
Imre Kaloz [Wed, 19 Aug 2015 08:35:41 +0000 (08:35 +0000)]
mvebu: add support for the Linksys boot counter (backport of r46690)
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46691
Imre Kaloz [Wed, 19 Aug 2015 08:21:20 +0000 (08:21 +0000)]
uhttpd: we don't know where the device is located, so reflect that in the cert
backport of r46688
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46689
Imre Kaloz [Tue, 18 Aug 2015 11:20:59 +0000 (11:20 +0000)]
mwlwifi: upgrade to 10.3.0.8-
20150818
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46686
Hauke Mehrtens [Mon, 17 Aug 2015 19:23:34 +0000 (19:23 +0000)]
xz: update to version 5.2.1
Backport of 46603.
This adds support for symbol versioning which is needed on
CentOs/RedHat 7 to fix #20134.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46681
Hauke Mehrtens [Mon, 17 Aug 2015 19:01:16 +0000 (19:01 +0000)]
CC: kernel: update 3.18 to 3.18.20
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46680
Hauke Mehrtens [Mon, 17 Aug 2015 18:59:00 +0000 (18:59 +0000)]
procd: fix seccomp build on some architectures
Backport of r46612.
fix generating syscall-names.h
Sometimes the syscall number is not defined with a number but with an
offset to an other syscall and then make_syscall_h.sh created some
broken header file.
For example the bit/syscall.h from musl for i386 has this:
#define __NR_timer_create 259
#define __NR_timer_settime (__NR_timer_create+1)
With this patch the resulting array looks like this:
[259] = "timer_create",
[(__NR_timer_create+1)] = "timer_settime",
This closes #20195.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46679
Jo-Philipp Wich [Mon, 17 Aug 2015 16:41:53 +0000 (16:41 +0000)]
CC: uhttpd: pass X-HTTP-Method-Override header to cgi scripts
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46677
SVN-Revision: 46678
John Crispin [Mon, 17 Aug 2015 13:19:01 +0000 (13:19 +0000)]
ugps: update to latest git HEAD
fixes 2 bugs
* typo
* use %04d rather than %d when printing the position
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46666
SVN-Revision: 46675
John Crispin [Mon, 17 Aug 2015 13:18:56 +0000 (13:18 +0000)]
ar71xx: Add support for Black Swift
Add support for the Black Swift board:
http://www.black-swift.com/
Took relevant parts and slightly adapted from:
https://github.com/blackswift/openwrt/blob/master/bsb.patch
Signed-off-by: Bruno Randolf <br1@einfach.org>
SVN-Revision: 46674
John Crispin [Mon, 17 Aug 2015 13:18:50 +0000 (13:18 +0000)]
ar71xx: Enable ath10k calibration data loading for EnGenius ESR1750 and EPG500.
Kinda-backport of r46415, though this patch uses the old-style calibration data loading.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46673
Felix Fietkau [Thu, 13 Aug 2015 19:35:29 +0000 (19:35 +0000)]
image: fix handling of per-device kernel build commands
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46589
SVN-Revision: 46591
Felix Fietkau [Thu, 13 Aug 2015 19:35:26 +0000 (19:35 +0000)]
image: fix device variable exports for initramfs images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46496
SVN-Revision: 46590
Rafał Miłecki [Wed, 12 Aug 2015 15:26:18 +0000 (15:26 +0000)]
bcm53xx: add workaround for Netgear R8000 network
According to the info from NVRAM we should use port 8 for the CPU (and
interface eth2). Unfortunately it doesn't work right now, so lets switch
to the port 5.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46586
Rafał Miłecki [Wed, 12 Aug 2015 13:30:34 +0000 (13:30 +0000)]
brcm47xx: fix reading WGT634U CFE variables
We got check for nvram_len placed too early and the code never tried
reading CFE variables used on WGT634U. This is a regression introduced
in r45942 and reported in #20291.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46584
SVN-Revision: 46585
Rafał Miłecki [Wed, 12 Aug 2015 00:58:41 +0000 (00:58 +0000)]
base-files: buttons: make power script return 0
It was missed in the r46471.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46582
SVN-Revision: 46583
Rafał Miłecki [Mon, 10 Aug 2015 23:58:15 +0000 (23:58 +0000)]
buttons: make all button handler scripts return 0
this is required by the new button timeout feature
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46471
SVN-Revision: 46581
Rafał Miłecki [Mon, 10 Aug 2015 22:29:46 +0000 (22:29 +0000)]
procd: update to the latest version, add "button" hotplug handler
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
In 15.05-rc2 we got support for "set-interval" and "clear-interval"
which got dropped with the update of procd done in r46257. This new
"button" action provides similar functionality so it makes sense to
backport it to 15.05.
Backport of r46578
SVN-Revision: 46579
Hauke Mehrtens [Sun, 9 Aug 2015 17:19:00 +0000 (17:19 +0000)]
CC: kernel: crypto: fix module loading of aead.ko
The name of the module was wrong before.
This should fix #20283.
backport of r46574.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46577
John Crispin [Mon, 3 Aug 2015 10:22:38 +0000 (10:22 +0000)]
ar71xx: use automatic firmware partition splitting for devolo dLAN devices
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
Backport of r46414
SVN-Revision: 46549
John Crispin [Mon, 3 Aug 2015 10:22:33 +0000 (10:22 +0000)]
ar71xx: Backport support for Onion Omega
Backport of r46458 to CC
https://onion.io/omega
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: Boken Lin <bl@onion.io>
Tested-by: Jacky Huang <huangfangcheng@163.com>
SVN-Revision: 46548
Felix Fietkau [Sun, 2 Aug 2015 15:08:27 +0000 (15:08 +0000)]
ramips: Fix Ticket #20153 swap radio calibration data pointers on the RE6500
This patch fixes weak radio signal reported by nikola.georgiev
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Backport of r46545
SVN-Revision: 46546
Felix Fietkau [Sat, 1 Aug 2015 15:52:54 +0000 (15:52 +0000)]
ar71xx: fix mr3220 device profile (#19990)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46541
SVN-Revision: 46542
Zoltan Herpai [Fri, 31 Jul 2015 19:57:10 +0000 (19:57 +0000)]
sunxi: CC: fix networking on Olimex A20 Micro
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46537
Imre Kaloz [Fri, 31 Jul 2015 18:25:03 +0000 (18:25 +0000)]
mvebu: update dts files for mamba / WRT1900AC (backport of r46530)
Fix for default button states in WRT1900AC dts files.
This prevents overlay wipe when reset is pressed.
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
SVN-Revision: 46531
Imre Kaloz [Fri, 31 Jul 2015 18:08:51 +0000 (18:08 +0000)]
mvebu: fix gpio config on the WRT1200AC (backport of r46527)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46528
Imre Kaloz [Thu, 30 Jul 2015 06:41:43 +0000 (06:41 +0000)]
mwlwifi: upgrade to latest rev with fixed firmware (backport of r46520)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46521
Jo-Philipp Wich [Mon, 27 Jul 2015 23:49:48 +0000 (23:49 +0000)]
CC: sdk: provide explicit CONFIG_MODULES kconfig symbol
Extend the SDK Config.in file to explicitely declare a MODULES symbol with
the "option modules" flag set in order to prevent a kconfig segmentation fault
whenever a "depends m" dependency is encountered.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46514
SVN-Revision: 46515
Jo-Philipp Wich [Mon, 27 Jul 2015 11:49:48 +0000 (11:49 +0000)]
CC: dnsmasq: add some missing files to the jail
found with strace, not sure we got all of them though
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Backport of r46467
SVN-Revision: 46511
Jo-Philipp Wich [Mon, 27 Jul 2015 11:49:43 +0000 (11:49 +0000)]
CC: base-files: fix /tmp/.jail permissions
We need a+x rights on the path to the root of the jails
so we can use users other than root (like nobody)
This partly fixes jailed dnsmasq
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Backport of r46466
SVN-Revision: 46510
Jo-Philipp Wich [Mon, 27 Jul 2015 11:49:39 +0000 (11:49 +0000)]
CC: procd: update to latest git HEAD
fixes http://patchwork.ozlabs.org/patch/497899/
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46465
SVN-Revision: 46509
Steven Barth [Mon, 27 Jul 2015 11:48:00 +0000 (11:48 +0000)]
firewall: fix typo in ESP rule
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46508
Steven Barth [Mon, 27 Jul 2015 11:47:56 +0000 (11:47 +0000)]
firewall: comply with REC-22, REC-24 of RFC 6092
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46507
Felix Fietkau [Sun, 26 Jul 2015 13:02:37 +0000 (13:02 +0000)]
ramips: swap radio calibration data pointers for DIR-860L
Fixes low 5 GHz tx power issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46497
SVN-Revision: 46499
Felix Fietkau [Sun, 26 Jul 2015 13:02:35 +0000 (13:02 +0000)]
tools: drop circular dependency between patch and ccache, build patch without ccache (fixes #20132)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46434
SVN-Revision: 46498
Hauke Mehrtens [Sat, 25 Jul 2015 13:54:15 +0000 (13:54 +0000)]
CC: ar71xx: EPG5000 requires ATH79_NVRAM
EPG5000 uses ath79 nvram functions, but does not select it. This breaks
build if no other board support enabling nvram support is selected.
Closes #19952.
Backport of r46190.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46494
Jonas Gorski [Sat, 25 Jul 2015 10:02:47 +0000 (10:02 +0000)]
CC: kernel: update 3.18 to 3.18.19
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.19
Backport of r46439.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46487
Jonas Gorski [Sat, 25 Jul 2015 10:02:44 +0000 (10:02 +0000)]
CC: brcm63xx: HG553 buttons support
This patch adds buttons support for Huawei EchoLife HG553.
Backport of r46388.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46486
John Crispin [Fri, 24 Jul 2015 08:58:57 +0000 (08:58 +0000)]
CC: ar71xx: add LED defaults for the EnGenius EPG5000
NB that wlan5g is phy0tpt and wlan2g phy1tpt.
Backport of r46226.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46450
John Crispin [Fri, 24 Jul 2015 08:58:45 +0000 (08:58 +0000)]
CC: ar71xx: Fix WAN port location on EnGenius ESR1750 and EPG5000.
The designated blue WAN port on both devices has index 5, not 1.
Backport of r46227.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46449
projects / openwrt / svn-archive / openwrt.git / log