git.openwrt.org Git - openwrt/staging/blogic.git/log

drm/i915: remove redundant checks for a null fb pointer

A prior check and return when pointer fb is null makes
subsequent null checks on fb redundant. Remove the redundant
null checks.

Addresses-Coverity: ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210142349.333171-1-colin.king@canonical.com

drm/i915/display: remove duplicated assignment to pointer crtc_state

Pointer crtc_state is being assigned twice, one of these is redundant
and can be removed.

Addresses-Coverity: ("Evaluation order violation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144535.341977-1-colin.king@canonical.com

drm/i915: Pass cpu transcoder to assert_pipe()

In order to eliminate intel_pipe_to_cpu_transcoder() (and its
crtc->config usage) let's pass the cpu transcoder to
assert_pipe() so we don't have to do the pipe->cpu transcoder
lookup on HSW+.

On VLV/CHV this can get called during eDP init, which
happens before crtc->config->cpu_transcoder is even
populated. So currently we're always reading PIPECONF(A)
there even if we're trying to check the state of some
other pipe.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112163812.22075-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: ELiminate intel_pipe_to_cpu_transcoder() from assert_fdi_tx()

Let's start to eliminate intel_pipe_to_cpu_transcoder() so that
we can get rid of one more crtc->config usage (which we will want
to nuke as well).

In the case of assert_fdi_tx() we know that we're never
dealing with the EDP transcoder so we can simply replace
this with a cast.

v2: Fix poor English in comment

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112163812.22075-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/selftests: Show the i915_active on failure

Print the i915_active state on selftest failure, with a hope it helps
illuminate the cause of the failure.

References: https://gitlab.freedesktop.org/drm/intel/issues/765
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210115502.3767070-1-chris@chris-wilson.co.uk

drm/i915/gem: Wait on unbind barriers when invalidating userptr

When we are told we have to drop all references to userptr, wait for any
barriers required for unbinding.

<4> [2055.808787] WARNING: CPU: 3 PID: 6239 at mm/mmu_notifier.c:472 __mmu_notifier_invalidate_range_start+0x1f2/0x250
<4> [2055.808792] Modules linked in: vgem mei_hdcp snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel r8169 lpc_ich realtek i915 snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core pinctrl_broxton snd_pcm pinctrl_intel mei_me intel_lpss_pci mei prime_numbers [last unloaded: vgem]
<4> [2055.808834] CPU: 3 PID: 6239 Comm: gem_userptr_bli Tainted: G     U            5.5.0-rc1-CI-CI_DRM_7522+ #1
<4> [2055.808839] Hardware name:  /NUC6CAYB, BIOS AYAPLCEL.86A.0049.2018.0508.1356 05/08/2018
<4> [2055.808847] RIP: 0010:__mmu_notifier_invalidate_range_start+0x1f2/0x250
<4> [2055.808853] Code: c2 48 c7 c7 70 17 2e 82 44 89 45 d4 48 8b 70 28 e8 ec 01 ef ff 41 f6 46 20 01 44 8b 45 d4 75 0a 41 83 f8 f5 44 89 7d d4 74 89 <0f> 0b 44 89 45 d4 eb 81 0f 0b 49 8b 46 18 49 8b 76 10 4c 89 ff 48
<4> [2055.808858] RSP: 0018:ffffc90002937d40 EFLAGS: 00010202
<4> [2055.808865] RAX: 0000000000000061 RBX: ffff8882703a33e0 RCX: 0000000000000001
<4> [2055.808870] RDX: 0000000000000000 RSI: ffff888277da8cb8 RDI: 00000000ffffffff
<4> [2055.808874] RBP: ffffc90002937d70 R08: 00000000fffffff5 R09: 0000000000000000
<4> [2055.808879] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
<4> [2055.808884] R13: ffffffff822e1716 R14: ffffc90002937d80 R15: 00000000fffffff5
<4> [2055.808890] FS:  00007fda75004e40(0000) GS:ffff888277d80000(0000) knlGS:0000000000000000
<4> [2055.808895] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [2055.808900] CR2: 000055ad72ec3000 CR3: 00000002697b2000 CR4: 00000000003406e0
<4> [2055.808904] Call Trace:
<4> [2055.808920]  unmap_vmas+0x13e/0x150
<4> [2055.808937]  unmap_region+0xa3/0x100
<4> [2055.808964]  __do_munmap+0x26d/0x490
<4> [2055.808980]  __vm_munmap+0x66/0xc0
<4> [2055.808994]  __x64_sys_munmap+0x12/0x20
<4> [2055.809001]  do_syscall_64+0x4f/0x220

Closes: https://gitlab.freedesktop.org/drm/intel/issues/771
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210133719.3874455-1-chris@chris-wilson.co.uk

drm/i915/gt: Check we are the Ironlake IPS provider before deregistering

Check that we own the global pointer before deregistering.

Reported-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210153620.3929372-1-chris@chris-wilson.co.uk

drm/i915: Improve execbuf debug

Convert i915_gem_check_execbuffer to return the error code instead of
a boolean so our neat EINVAL debugging trick works within this function.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209122314.16289-1-tvrtko.ursulin@linux.intel.com

drm/i915: Copy across scheduler behaviour flags across submit fences

We want the bonded request to have the same scheduler properties as its
master so that it is placed at the same depth in the queue. For example,
consider we have requests A, B and B', where B & B' are a bonded pair to
run in parallel on two engines.

A -> B
\- B'

B will run after A and so may be scheduled on an idle engine and wait on
A using a semaphore. B' sees B being executed and so enters the queue on
the same engine as A. As B' did not inherit the semaphore-chain from B,
it may have higher precedence than A and so preempts execution. However,
B' then sits on a semaphore waiting for B, who is waiting for A, who is
blocked by B.

Ergo B' needs to inherit the scheduler properties from B (i.e. the
semaphore chain) so that it is scheduled with the same priority as B and
will not be executed ahead of Bs dependencies.

Furthermore, to prevent the priorities changing via the expose fence on
B', we need to couple in the dependencies for PI. This requires us to
relax our sanity-checks that dependencies are strictly in order.

v2: Synchronise (B, B') execution on all platforms, regardless of using
a scheduler, any no-op syncs should be elided.

Fixes: ee1136908e9b ("drm/i915/execlists: Virtual engine bonding")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/464
Testcase: igt/gem_exec_balancer/bonded-chain
Testcase: igt/gem_exec_balancer/bonded-semaphore
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210151332.3902215-1-chris@chris-wilson.co.uk

drm/i915/dsb: Fix in mmio offset calculation of DSB instance

As the current usage is restricted to first DSB instance per pipe, so
existing code could not catch the issue to calculate the mmio offset
of different DSB instance per pipe. Corrected the offset calculation.

Fixes: a6e58d9a2e04 ("drm/i915/dsb: Check DSB engine status.")
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205123513.22603-1-animesh.manna@intel.com

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kernel.org/r/20191210093957.5120f717@canb.auug.org.au

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dsi: add support for DSC

Enable DSC for DSI, if specified in VBT.

This still lacks DSC aware get config implementation, and therefore
state checker will fail. Also mode valid is not there yet.

v5:
- add dsc get config call

v4:
- convert_rgb = true (Vandita)
- ignore max cdclock check (Vandita)
- rename pipe_config to crtc_state

v3:
- take compressed bpp into account

v2:
- Nuke conn_state->max_requested_bpc, it's not used on DSI

Bspec: 49263
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e0136299e03c582238523189f6951eeb08daed98.1575974743.git.jani.nikula@intel.com

drm/i915/dsi: Fix state mismatch warns for horizontal timings with DSC

When DSC is enabled consider the compression ratio that was used during
horizontal timing calculations.

This may still lead to warns due to rounding errors in the round-trip.

v2 by Jani:
- rebase on top of the more generic dsc state readout

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c2481aaf67ea396aa4698cd2d8e23d19ec4f4ecf.1575974743.git.jani.nikula@intel.com

drm/i915/dsi: account for DSC in horizontal timings

When DSC is enabled, we need to adjust the horizontal timings to account
for the compressed (and therefore reduced) link speed.

The compressed frequency ratio simplifies down to the ratio between
compressed and non-compressed bpp.

Bspec: 49263
Suggested-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fecebdc2719dd0c78eaf8f4d3225bb185956d7db.1575974743.git.jani.nikula@intel.com

drm/i915/dsi: use compressed pixel format with DSC

When compression is enabled, configure the DSI transcoder to use
compressed format.

Suggested-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0e58022ce5425560b3b31062c41de385a736c8b1.1575974743.git.jani.nikula@intel.com

drm/i915/dsi: take compression into account in afe_clk()

Pass crtc_state to afe_clk() to be able to take compression into account
in the computation. Once we enable compression, that is.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a698780362b8d6955d115ef8bb6cf1f7aabbee00.1575974743.git.jani.nikula@intel.com

drm/i915/dsi: use afe_clk() instead of intel_dsi_bitrate()

We'll be expanding afe_clk() to take DSC into account. Switch to using
it where DSC matters. Which is really everywhere that
intel_dsi_bitrate() is currently used in ICL DSI code.

The functional difference is that we round the result closest instead of
down.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b6c52b320daa8aaa0d79618ce714170f8f04ff67.1575974743.git.jani.nikula@intel.com

drm/i915/dsi: abstract afe_clk calculation

We'll make more use of it in the future.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0341fdc13260625150315b0b57a4227eb766c50f.1575974743.git.jani.nikula@intel.com

drm/i915/dsi: set pipe_bpp on ICL configure config

The ICL DSI pipe_bpp currently comes from
compute_baseline_pipe_bpp(). Fix it.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/191f5c4fa5f4af29d4bf7e30bb35f45ce05b33f0.1575974743.git.jani.nikula@intel.com

drm/i915/dsc: add basic hardware state readout support

Add basic hardware state readout for DSC, and check the most relevant
details in the state checker.

v2:
- check for DSC power before reading its state
- check if source supports DSC at all

As a side effect, this should also get the power domains for the enabled
DSC on takeover, and subsequently disable DSC if it's not needed.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3fb018cf9bd9a4c275aab389b6ec0f2a4e938bb9.1575974743.git.jani.nikula@intel.com

drm/i915/dsc: make DSC source support helper generic

Move intel_dp_source_supports_dsc() from intel_dp.c as
intel_dsc_source_support() in intel_vdsc.c. The DSC source support is
more about DSC than about DP, and will be needed for DP independent
code.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6c9f646090913290fb00efd46a4332421bf95930.1575974743.git.jani.nikula@intel.com

drm/i915/dsc: add support for computing and writing PPS for DSI encoders

Add DSI specific computation and transmission to display of PPS.

With hopes that this approach will work for both DP and DSI encoders.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/461db10b1f4d76625625a9f2b1e3d932fff42799.1575974743.git.jani.nikula@intel.com

drm/i915/dsc: move slice height calculation to encoder

Turns out this isn't compatible with DSI, where we use the value from
VBT. No functional changes.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3dd689688a51daff26088eaf6feac27f8b9f5ebc.1575974743.git.jani.nikula@intel.com

drm/i915/dsc: move DP specific compute params to intel_dp.c

Turns out future DSI specific parameters aren't workable with the
approach of having the encoder specific functions in intel_vdsc.c. Make
intel_dsc_compute_params() a helper that does the encoder independent
parts, and have encoder code call it. Move intel_dsc_dp_compute_params()
to intel_dp.c as intel_dp_dsc_compute_params().

No functional changes.

v2: Rename pipe_config to crtc_state while at it.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/620688ec302f7f49cc539c6c1653bfaf6092fce0.1575974743.git.jani.nikula@intel.com

drm/i915/bios: add support for querying DSC details for encoder

Add function for retrieving the DSC data for an encoder.

Initially, this is DSI specific, as DP does not use VBT settings for DSC
at all. It's also not very pretty.

In the future we might have a pointer from encoder to the child device,
which would make the child device list query here so much more sensible.

v3:
- use crtc_state instead of pipe_config
- return true by default from intel_bios_get_dsc_params()
- expand the comment about rc_buffer_block_size and rc_buffer_size

v2:
- make more robust, debug log errors better

Bspec: 29885
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b895c349d964d70e4cad26f12a629ea1898bfcc2.1575974743.git.jani.nikula@intel.com

drm/i915/bios: parse compression parameters block

Check for child devices that specify compression, and store the device
specific compression parameters in the display device data struct for
later use. Warn if compression is requested but not available.

Use fairly rigid checks for compression data for starters. These can be
made more dynamic later.

Log about DSC presence in DDI port parse, though this is not universal
across platforms or port types (DSI).

v2: amended debug logging

Bspec: 29885
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/357d685ba047faf2285138c2f7014a8dee9a12b7.1575974743.git.jani.nikula@intel.com

drm/i915/bios: pass devdata to parse_ddi_port

Allow accessing the parent structure later on. Drop const for allowing
future modification as well.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3318b09aaccbbe141e233ca510d581b421259a2a.1575974743.git.jani.nikula@intel.com

drm/i915/tgl: Program BW_BUDDY registers during display init

Gen12 can improve bandwidth efficiency by pairing up memory requests
with similar addresses.  We need to program the BW_BUDDY1 and BW_BUDDY2
registers according to the memory configuration during display
initialization to take advantage of this capability.

The magic numbers we program here feel like something that could
definitely change on future platforms, so let's use a table-based
programming scheme to make this easy to extend in the future.

v2:
- Add separate table for Wa_1409767108.  (Stan)
- Reorder structure reduce size by a word.  Page mask can still be up
   to 28 bits (even though current values are small) so we should keep
   it as a u32, but just using a u8 for DRAM type instead of the actual
   enum type saves space.  (Lucas, Ville)
- Rename function to tgl_bw_buddy_init() to be more precise about what
   it does.  (Lucas)

Bspec: 49189
Bspec: 49218
Bspec: 52890
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205224848.76712-1-matthew.d.roper@intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915/selftests: fix uninitialized variable sum when summing up values

Currently the variable sum is not uninitialized and hence will cause an
incorrect result in the summation values. Fix this by initializing
sum to the first item in the summation.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 3c7a44bbbfa7 ("drm/i915/selftests: Perform some basic cycle counting of MI ops")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210143205.338308-1-colin.king@canonical.com

drm/i915/gt: Detect if we miss WaIdleLiteRestore

In order to avoid confusing the HW, we must never submit an empty ring
during lite-restore, that is we should always advance the RING_TAIL
before submitting to stay ahead of the RING_HEAD.

Normally this is prevented by keeping a couple of spare NOPs in the
request->wa_tail so that on resubmission we can advance the tail. This
relies on the request only being resubmitted once, which is the normal
condition as it is seen once for ELSP[1] and then later in ELSP[0]. On
preemption, the requests are unwound and the tail reset back to the
normal end point (as we know the request is incomplete and therefore its
RING_HEAD is even earlier).

However, if this w/a should fail we would try and resubmit the request
with the RING_TAIL already set to the location of this request's wa_tail
potentially causing a GPU hang. We can spot when we do try and
incorrectly resubmit without advancing the RING_TAIL and spare any
embarrassment by forcing the context restore.

In the case of preempt-to-busy, we leave the requests running on the HW
while we unwind. As the ring is still live, we cannot rewind our
rq->tail without forcing a reload so leave it set to rq->wa_tail and
only force a reload if we resubmit after a lite-restore. (Normally, the
forced reload will be a part of the preemption event.)

Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/673
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@kernel.vger.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191209023215.3519970-1-chris@chris-wilson.co.uk

drm/i915/guc: kill the GuC client

We now only use 1 client without any plan to add more. The client is
also only holding information about the WQ and the process desc, so we
can just move those in the intel_guc structure and always use stage_id
0.

v2: fix comment (John)
v3: fix the comment for real, fix kerneldoc

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-4-daniele.ceraolospurio@intel.com

drm/i915/guc: kill doorbell code and selftests

Instead of relying on the workqueue, the upcoming reworked GuC
submission flow will offer the host driver indipendent control over
the execution status of each context submitted to GuC. As part of this,
the doorbell usage model has been reworked, with each doorbell being
paired to a single lrc and a doorbell ring representing new work
available for that specific context. This mechanism, however, limits
the number of contexts that can be registered with GuC to the number of
doorbells, which is an undesired limitation. To avoid this limitation,
we requested the GuC team to also provide a H2G that will allow the host
to notify the GuC of work available for a specified lrc, so we can use
that mechanism instead of relying on the doorbells. We can therefore drop
the doorbell code we currently have, also given the fact that in the
unlikely case we'd want to switch back to using doorbells we'd have to
heavily rework it.
The workqueue will still have a use in the new interface to pass special
commands, so that code has been retained for now.

With the doorbells gone and the GuC client becoming even simpler, the
existing GuC selftests don't give us any meaningful coverage so we can
remove them as well. Some selftests might come with the new code, but
they will look different from what we have now so if doesn't seem worth
it to keep the file around in the meantime.

v2: fix comments and commit message (John)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-3-daniele.ceraolospurio@intel.com

drm/i915/guc: add a helper to allocate and map guc vma

We already have a couple of use-cases in the code and another one will
come in one of the later patches in the series.

v2: use the new function for the CT object as well

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-2-daniele.ceraolospurio@intel.com

drm/i915/guc: Drop leftover preemption code

Remove unused enums and ctx_save_restore_disabled() function, leftover
from the legacy preemption removal.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-1-daniele.ceraolospurio@intel.com

drm/i915/hdcp: Nuke intel_hdcp_transcoder_config()

intel_hdcp_transcoder_config() is clobbering some globally visible
state in .compute_config(). That is a big no no as .compute_config()
is supposed to have no visible side effects when either the commit
fails or it's just a TEST_ONLY commit.

Inline this stuff into intel_hdcp_enable() so that the state only
gets modified when we actually commit the state to the hardware.

Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Fixes: 39e2df090c3c ("drm/i915/hdcp: update current transcoder into intel_hdcp")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-2-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>

drm/i915/fbc: Reallocate cfb if we need more of it

The code assumes we can omit the cfb allocation once fbc
has been enabled once. That's nonsense. Let's try to
reallocate it if we need to.

The code is still a mess, but maybe this is enough to get
fbc going in some cases where it initially underallocates
the cfb and there's no full modeset to fix it up.

Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-15-ville.syrjala@linux.intel.com
Tested-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Enable fbc by default on glk+ once again

Now that we have the glk+ w/a for back to back fbc disable + plane
update in place we can once more enable fbc on glk+ by default.

Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-14-ville.syrjala@linux.intel.com
Tested-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Wait for vblank after FBC disable on glk+

On glk+ the hardware gets confused if we disable FBC while
it's recompressing and we perform a plane update during the
same frame. The result is that top of the screen gets corrupted.

We can avoid that by giving the hardware enough time to finish
the FBC disable before we touch the plane registers. Ie. we need
an extra vblank wait after FBC disable.

v2: Don't do the vblank wait if we never activated FBC in hw

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128150338.12490-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Start using flip nuke

The hardware automagically nukes the cfb on flip. We can use
that whenever the plane/crtc configuration doesn't change too
much. Let's hook that up.

We'll need this for glk+ since we need to introduce an extra
vblank wait after FBC disable. As we're currently disabling
FBC around all plane updates we'd slow them down by an extra
frame. Not a great user experience when your fps is always
capped at vrefres/2. With flip nuke we don't need the extra
vblank wait.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-12-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Nuke fbc.enabled

fbc.enabled == (fbc.crtc != NULL), so let's just nuke fbc.enabled.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-11-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: s/gen9 && !glk/gen9_bc || bxt/

Replace the 'gen9 && !glk' with the slightly more obvious
'gen9_bc || bxt'.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-10-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Make fence_id optional for i965gm

i965gm no longer needs the fence for scanout so we should be
do what we do for ctg+ and only configure a fence for FBC
when we have one.

In theory this should do nothing atm on account of
intel_fbc_can_activate() requiring the fence, but since
we do this for g4x+ let's do it for i965gm as well. We
may want to relax the requirements at some point and allow
FBC without a fence.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-9-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Store fence_id directly in fbc cache/params

Rather than playing around with vma+flags let's just grab
the fence id from within and stash that directly in the fbc
cache/params.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-8-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Track plane visibility

Currently the code (ab)uses cache->vma to indicate the plane
visibility. I want to nuke that so let's add a dedicated boolean
for this.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-7-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Precompute gen9 cfb stride w/a

Precompute the override cfb stride value so that we can check
it when determining if flip nuke can be used or not.

The hardware has 13 bits for this, so we can shrink the storage
to u16 while at it.

v2: Don't explode when crtc_state->enable_fbc lies to us

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Remove the FBC_RT_BASE setup for ILK/SNB

We don't want to use the FBC hardware render tracking so let's not
enable it. To use the hw tracking properly we'd anyway need to
integrate this into the command submissing path as the register is
context saved, and if rendering happens via the ppgtt we'd have
to configure it with the ppgtt address instead of the ggtt address.
Easier to use software tracking instead.

Note that on pre-ilk we can't actually disable render tracking.
However we can't rely on it because it requires that DSPSURF to
match the render target address, and since we play tricks
with DSPSURF that may not be the case. Hence we shall rely on
software render tracking on all platforms.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-5-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Relocate intel_crtc_active()

Move intel_crtc_active() next to its only remaining
user (pre-g4x wm code).

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Nuke bogus single pipe fbc1 restriction

Not sure where the single pipe only restriction came for fbc1.
Nothing I can see that would prevent this.

v2: Nuke no_fbc_on_multiple_pipes() too

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Disable fbc by default on all glk+

We're missing a workaround in the fbc code for all glk+ platforms
which can cause corruption around the top of the screen. So
enabling fbc by default is a bad idea. I'm not keen to backport
the w/a so let's start by disabling fbc by default on all glk+.
We'll lift the restriction once the w/a is in place.

Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/perf: Configure OAR for specific context

Gen12 supports saving/restoring render counters per context. Apply OAR
configuration only for the context that is passed in to perf.

v2:
- Fix OACTXCONTROL value to only stop/resume counters.
- Remove gen12_update_reg_state_unlocked as power state is already
applied by the caller.

v3: (Lionel)
- Move register initialization into the array
- Assume a valid oa_config in enable_metric_set

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206194339.31356-2-umesh.nerlige.ramappa@intel.com

drm/i915/perf: Allow non-privileged access when OA buffer is not sampled

SAMPLE_OA_REPORT enables sampling of OA reports from the OA buffer.
Since reports from OA buffer had system wide visibility, collecting
samples from the OA buffer was a privileged operation on previous
platforms. Prior to TGL, it was also necessary to sample the OA buffer
to normalize reports from MI REPORT PERF COUNT.

TGL has a dedicated OAR unit to sample perf reports for a specific
render context. This removes the necessity to sample OA buffer.

- If not sampling the OA buffer, allow non-privileged access. An earlier
patch allows the non-privilege access:
https://patchwork.freedesktop.org/patch/337716/?series=68582&rev=1
- Clear up the path for non-privileged access in this patch

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206194339.31356-1-umesh.nerlige.ramappa@intel.com

drm/i915: Change i915_vma_unbind() to report -EAGAIN on activity

If someone else acquires the i915_vma before we complete our wait and
unbind it, we currently error out with -EBUSY. Use -EAGAIN instead so
that if necessary the caller is prepared to try again.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/683
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191208161252.3015727-2-chris@chris-wilson.co.uk

drm/i915/gem: Avoid rcu_barrier() from shrinker paths

As i915_gem_object_unbind() waits on an rcu_barrier() to flush vm
releases (and destruction of their bound vma), we have to be careful not
to invoke that barrier from beneath the shrinker:

<4> [430.222671] WARNING: possible circular locking dependency detected
<4> [430.222673] 5.4.0-rc8-CI-CI_DRM_7508+ #1 Tainted: G     U
<4> [430.222675] ------------------------------------------------------
<4> [430.222677] gem_pwrite/2317 is trying to acquire lock:
<4> [430.222678] ffffffff82248218 (rcu_state.barrier_mutex){+.+.}, at: rcu_barrier+0x23/0x190
<4> [430.222685]
but task is already holding lock:
<4> [430.222687] ffffffff82263a40 (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part.117+0x0/0x30
<4> [430.222691]
which lock already depends on the new lock.

<4> [430.222693]
the existing dependency chain (in reverse order) is:
<4> [430.222695]
-> #2 (fs_reclaim){+.+.}:
<4> [430.222698]        fs_reclaim_acquire.part.117+0x24/0x30
<4> [430.222702]        kmem_cache_alloc_trace+0x2a/0x2c0
<4> [430.222705]        intel_cpuc_prepare+0x37/0x1a0
<4> [430.222709]        cpuhp_invoke_callback+0x9b/0x9d0
<4> [430.222712]        _cpu_up+0xa2/0x140
<4> [430.222714]        do_cpu_up+0x61/0xa0
<4> [430.222718]        smp_init+0x57/0x96
<4> [430.222722]        kernel_init_freeable+0xac/0x1c7
<4> [430.222725]        kernel_init+0x5/0x100
<4> [430.222728]        ret_from_fork+0x24/0x50
<4> [430.222729]
-> #1 (cpu_hotplug_lock.rw_sem){++++}:
<4> [430.222733]        cpus_read_lock+0x34/0xd0
<4> [430.222734]        rcu_barrier+0xaa/0x190
<4> [430.222736]        kernel_init+0x21/0x100
<4> [430.222737]        ret_from_fork+0x24/0x50
<4> [430.222739]
-> #0 (rcu_state.barrier_mutex){+.+.}:
<4> [430.222742]        __lock_acquire+0x1328/0x15d0
<4> [430.222743]        lock_acquire+0xa7/0x1c0
<4> [430.222746]        __mutex_lock+0x9a/0x9d0
<4> [430.222747]        rcu_barrier+0x23/0x190
<4> [430.222850]        i915_gem_object_unbind+0x264/0x3d0 [i915]
<4> [430.222882]        i915_gem_shrink+0x297/0x5f0 [i915]
<4> [430.222912]        i915_gem_shrink_all+0x38/0x60 [i915]
<4> [430.222934]        i915_drop_caches_set+0x1f0/0x240 [i915]
<4> [430.222938]        simple_attr_write+0xb0/0xd0
<4> [430.222941]        full_proxy_write+0x51/0x80
<4> [430.222943]        vfs_write+0xb9/0x1d0
<4> [430.222944]        ksys_write+0x9f/0xe0
<4> [430.222946]        do_syscall_64+0x4f/0x210
<4> [430.222948]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4> [430.222950]
other info that might help us debug this:

<4> [430.222952] Chain exists of:
  rcu_state.barrier_mutex --> cpu_hotplug_lock.rw_sem --> fs_reclaim

<4> [430.222955]  Possible unsafe locking scenario:

<4> [430.222957]        CPU0                    CPU1
<4> [430.222958]        ----                    ----
<4> [430.222960]   lock(fs_reclaim);
<4> [430.222961]                                lock(cpu_hotplug_lock.rw_sem);
<4> [430.222963]                                lock(fs_reclaim);
<4> [430.222964]   lock(rcu_state.barrier_mutex);
<4> [430.222966]
*** DEADLOCK ***

<4> [430.222968] 3 locks held by gem_pwrite/2317:
<4> [430.222969]  #0: ffff88849e2d9408 (sb_writers#14){.+.+}, at: vfs_write+0x1a4/0x1d0
<4> [430.222973]  #1: ffff888496976db0 (&attr->mutex){+.+.}, at: simple_attr_write+0x36/0xd0
<4> [430.222976]  #2: ffffffff82263a40 (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part.117+0x0/0x30
<4> [430.222980]
stack backtrace:
<4> [430.222982] CPU: 1 PID: 2317 Comm: gem_pwrite Tainted: G     U            5.4.0-rc8-CI-CI_DRM_7508+ #1
<4> [430.222985] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.2321.A08.1909162051 09/16/2019
<4> [430.222989] Call Trace:
<4> [430.222992]  dump_stack+0x71/0x9b
<4> [430.222995]  check_noncircular+0x19b/0x1c0
<4> [430.222998]  ? __lock_acquire+0x1328/0x15d0
<4> [430.222999]  __lock_acquire+0x1328/0x15d0
<4> [430.223001]  ? mark_held_locks+0x49/0x70
<4> [430.223003]  lock_acquire+0xa7/0x1c0
<4> [430.223005]  ? rcu_barrier+0x23/0x190
<4> [430.223008]  __mutex_lock+0x9a/0x9d0
<4> [430.223009]  ? rcu_barrier+0x23/0x190
<4> [430.223011]  ? rcu_barrier+0x23/0x190
<4> [430.223013]  ? find_held_lock+0x2d/0x90
<4> [430.223045]  ? i915_gem_object_unbind+0x24a/0x3d0 [i915]
<4> [430.223048]  ? rcu_barrier+0x23/0x190
<4> [430.223049]  rcu_barrier+0x23/0x190
<4> [430.223081]  i915_gem_object_unbind+0x264/0x3d0 [i915]
<4> [430.223119]  i915_gem_shrink+0x297/0x5f0 [i915]

Closes: https://gitlab.freedesktop.org/drm/intel/issues/743
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191208161252.3015727-1-chris@chris-wilson.co.uk

drm/i915: Flesh out device_info pretty printer

Include all the number fields for describing the GT, as well as the
current boolean flags, primarily for inclusion in error states.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207182937.2583002-1-chris@chris-wilson.co.uk

drm/i915/gem: Comment on inability to check args.pad for MMAP_OFFSET

Since we didn't check and insist that args.pad must be zero for MMAP_GTT
historically, we cannot insert a check now as old userspace may be
feeding in garbage. As such the lack of check is enshrined into the ABI,
so add a comment to remind us we cannot add the check later.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207222644.2830129-1-chris@chris-wilson.co.uk

Linux 5.5-rc1

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

1) More jumbo frame fixes in r8169, from Heiner Kallweit.

2) Fix bpf build in minimal configuration, from Alexei Starovoitov.

3) Use after free in slcan driver, from Jouni Hogander.

4) Flower classifier port ranges don't work properly in the HW offload
    case, from Yoshiki Komachi.

5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.

6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.

7) Fix flow dissection in dsa TX path, from Alexander Lobakin.

8) Stale syncookie timestampe fixes from Guillaume Nault.

[ Did an evil merge to silence a warning introduced by this pull - Linus ]

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  r8169: fix rtl_hw_jumbo_disable for RTL8168evl
  net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
  r8169: add missing RX enabling for WoL on RTL8125
  vhost/vsock: accept only packets with the right dst_cid
  net: phy: dp83867: fix hfs boot in rgmii mode
  net: ethernet: ti: cpsw: fix extra rx interrupt
  inet: protect against too small mtu values.
  gre: refetch erspan header from skb->data after pskb_may_pull()
  pppoe: remove redundant BUG_ON() check in pppoe_pernet
  tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
  tcp: tighten acceptance of ACKs not matching a child socket
  tcp: fix rejected syncookies due to stale timestamps
  lpc_eth: kernel BUG on remove
  tcp: md5: fix potential overestimation of TCP option space
  net: sched: allow indirect blocks to bind to clsact in TC
  net: core: rename indirect block ingress cb function
  net-sysfs: Call dev_hold always in netdev_queue_add_kobject
  net: dsa: fix flow dissection on Tx path
  net/tls: Fix return values to avoid ENOTSUPP
  net: avoid an indirect call in ____sys_recvmsg()
  ...

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
"Eleven patches, all in drivers (no core changes) that are either minor
  cleanups or small fixes.

  They were late arriving, but still safe for -rc1"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry
  scsi: megaraid_sas: Make poll_aen_lock static
  scsi: sd_zbc: Improve report zones error printout
  scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI
  scsi: qla2xxx: unregister ports after GPN_FT failure
  scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan
  scsi: pm80xx: Remove unused include of linux/version.h
  scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3
  scsi: scsi_transport_sas: Fix memory leak when removing devices
  scsi: lpfc: size cpu map by last cpu id set
  scsi: ibmvscsi_tgt: Remove unneeded variable rc

Merge tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Nine cifs/smb3 fixes:

   - one fix for stable (oops during oplock break)

   - two timestamp fixes including important one for updating mtime at
     close to avoid stale metadata caching issue on dirty files (also
     improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the
     wire)

   - two fixes for "modefromsid" mount option for file create (now
     allows mode bits to be set more atomically and accurately on create
     by adding "sd_context" on create when modefromsid specified on
     mount)

   - two fixes for multichannel found in testing this week against
     different servers

   - two small cleanup patches"

* tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: improve check for when we send the security descriptor context on create
  smb3: fix mode passed in on create for modetosid mount option
  cifs: fix possible uninitialized access and race on iface_list
  cifs: Fix lookup of SMB connections on multichannel
  smb3: query attributes on file close
  smb3: remove unused flag passed into close functions
  cifs: remove redundant assignment to pointer pneg_ctxt
  fs: cifs: Fix atime update check vs mtime
  CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks

Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs

Pull misc vfs cleanups from Al Viro:
"No common topic, just three cleanups".

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make __d_alloc() static
  fs/namespace: add __user to open_tree and move_mount syscalls
  fs/fnctl: fix missing __user in fcntl_rw_hint()

drm/i915/gt: Turn vm off then on again for gen7 mm switch

"Have you tried switching it off and on again?"

Set the size of the mm to 0 to disable all PD cachelines, before
enabling the whole mm again. Let's see if that tricks the TLB into
reloading.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191208143648.2986669-1-chris@chris-wilson.co.uk

Merge tag 'ntb-5.5' of git://github.com/jonmason/ntb

Pull NTB update from Jon Mason:
"Just a simple patch to add a new Hygon Device ID to the AMD NTB device
driver"

* tag 'ntb-5.5' of git://github.com/jonmason/ntb:
NTB: Add Hygon Device ID

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull more input updates from Dmitry Torokhov:

- fixups for Synaptics RMI4 driver

- a quirk for Goodinx touchscreen on Teclast tablet

- a new keycode definition for activating privacy screen feature found
   on a few "enterprise" laptops

- updates to snvs_pwrkey driver

- polling uinput device for writing (which is always allowed) now works

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers
  Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash
  Input: goodix - add upside-down quirk for Teclast X89 tablet
  Input: add privacy screen toggle keycode
  Input: uinput - fix returning EPOLLOUT from uinput_poll
  Input: snvs_pwrkey - remove gratuitous NULL initializers
  Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q

Merge tag 'iomap-5.5-merge-14' of git://git./fs/xfs/xfs-linux

Pull iomap fixes from Darrick Wong:
"Fix a race condition and a use-after-free error:

   - Fix a UAF when reporting writeback errors

   - Fix a race condition when handling page uptodate on fragmented file
     with blocksize < pagesize"

* tag 'iomap-5.5-merge-14' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: stop using ioend after it's been freed in iomap_finish_ioend()
  iomap: fix sub-page uptodate handling

Merge tag 'xfs-5.5-merge-17' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
"Fix a couple of resource management errors and a hang:

   - fix a crash in the log setup code when log mounting fails

   - fix a hang when allocating space on the realtime device

   - fix a block leak when freeing space on the realtime device"

* tag 'xfs-5.5-merge-17' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix mount failure crash on invalid iclog memory access
  xfs: don't check for AG deadlock for realtime files in bunmapi
  xfs: fix realtime file data space leak

Merge tag 'for-linus-5.5-ofs1' of git://git./linux/kernel/git/hubcap/linux

Pull orangefs update from Mike Marshall:
"orangefs: posix open permission checking...

  Orangefs has no open, and orangefs checks file permissions on each
  file access. Posix requires that file permissions be checked on open
  and nowhere else. Orangefs-through-the-kernel needs to seem posix
  compliant.

  The VFS opens files, even if the filesystem provides no method. We can
  see if a file was successfully opened for read and or for write by
  looking at file->f_mode.

  When writes are flowing from the page cache, file is no longer
  available. We can trust the VFS to have checked file->f_mode before
  writing to the page cache.

  The mode of a file might change between when it is opened and IO
  commences, or it might be created with an arbitrary mode.

  We'll make sure we don't hit EACCES during the IO stage by using
  UID 0"

[ This is "posixish", but not a great solution in the long run, since a
  proper secure network server shouldn't really trust the client like this.
  But proper and secure POSIX behavior requires an open method and a
  resulting cookie for IO of some kind, or similar.    - Linus ]

* tag 'for-linus-5.5-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: posix open permission checking...

Merge tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
"This is a relatively quiet cycle for nfsd, mainly various bugfixes.

  Possibly most interesting is Trond's fixes for some callback races
  that were due to my incomplete understanding of rpc client shutdown.
  Unfortunately at the last minute I've started noticing a new
  intermittent failure to send callbacks. As the logic seems basically
  correct, I'm leaving Trond's patches in for now, and hope to find a
  fix in the next week so I don't have to revert those patches"

* tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux: (24 commits)
  nfsd: depend on CRYPTO_MD5 for legacy client tracking
  NFSD fixing possible null pointer derefering in copy offload
  nfsd: check for EBUSY from vfs_rmdir/vfs_unink.
  nfsd: Ensure CLONE persists data and metadata changes to the target file
  SUNRPC: Fix backchannel latency metrics
  nfsd: restore NFSv3 ACL support
  nfsd: v4 support requires CRYPTO_SHA256
  nfsd: Fix cld_net->cn_tfm initialization
  lockd: remove __KERNEL__ ifdefs
  sunrpc: remove __KERNEL__ ifdefs
  race in exportfs_decode_fh()
  nfsd: Drop LIST_HEAD where the variable it declares is never used.
  nfsd: document callback_wq serialization of callback code
  nfsd: mark cb path down on unknown errors
  nfsd: Fix races between nfsd4_cb_release() and nfsd4_shutdown_callback()
  nfsd: minor 4.1 callback cleanup
  SUNRPC: Fix svcauth_gss_proxy_init()
  SUNRPC: Trace gssproxy upcall results
  sunrpc: fix crash when cache_head become valid before update
  nfsd: remove private bin2hex implementation
  ...

Merge tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
"Highlights include:

  Features:

   - NFSv4.2 now supports cross device offloaded copy (i.e. offloaded
     copy of a file from one source server to a different target
     server).

   - New RDMA tracepoints for debugging congestion control and Local
     Invalidate WRs.

  Bugfixes and cleanups

   - Drop the NFSv4.1 session slot if nfs4_delegreturn_prepare waits for
     layoutreturn

   - Handle bad/dead sessions correctly in nfs41_sequence_process()

   - Various bugfixes to the delegation return operation.

   - Various bugfixes pertaining to delegations that have been revoked.

   - Cleanups to the NFS timespec code to avoid unnecessary conversions
     between timespec and timespec64.

   - Fix unstable RDMA connections after a reconnect

   - Close race between waking an RDMA sender and posting a receive

   - Wake pending RDMA tasks if connection fails

   - Fix MR list corruption, and clean up MR usage

   - Fix another RPCSEC_GSS issue with MIC buffer space"

* tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
  SUNRPC: Capture completion of all RPC tasks
  SUNRPC: Fix another issue with MIC buffer space
  NFS4: Trace lock reclaims
  NFS4: Trace state recovery operation
  NFSv4.2 fix memory leak in nfs42_ssc_open
  NFSv4.2 fix kfree in __nfs42_copy_file_range
  NFS: remove duplicated include from nfs4file.c
  NFSv4: Make _nfs42_proc_copy_notify() static
  NFS: Fallocate should use the nfs4_fattr_bitmap
  NFS: Return -ETXTBSY when attempting to write to a swapfile
  fs: nfs: sysfs: Remove NULL check before kfree
  NFS: remove unneeded semicolon
  NFSv4: add declaration of current_stateid
  NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn
  NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()
  nfsv4: Move NFSPROC4_CLNT_COPY_NOTIFY to end of list
  SUNRPC: Avoid RPC delays when exiting suspend
  NFS: Add a tracepoint in nfs_fh_to_dentry()
  NFSv4: Don't retry the GETATTR on old stateid in nfs4_delegreturn_done()
  NFSv4: Handle NFS4ERR_OLD_STATEID in delegreturn
  ...

drm/i915/gtt: Account for preallocation in asserts

Our asserts allow for the PDEs to be allocated concurrently, but we did
not account for the aliasing-ppgtt to be preallocated on top.

Testcase: igt/gem_ppgtt #bsw
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207221453.2802627-1-chris@chris-wilson.co.uk

smb3: improve check for when we send the security descriptor context on create

We had cases in the previous patch where we were sending the security
descriptor context on SMB3 open (file create) in cases when we hadn't
mounted with with "modefromsid" mount option.

Add check for that mount flag before calling ad_sd_context in
open init.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Merge tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

- Remove hugepage checks for reserved pfns (Ben Luo)

- Fix irq-bypass unregister ordering (Jiang Yi)

* tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfio:
vfio/pci: call irq_bypass_unregister_producer() before freeing irq
vfio/type1: remove hugepage checks in is_invalid_reserved_pfn()

Merge tag 'for-linus-5.5b-rc1-tag' of git://git./linux/kernel/git/xen/tip

Pull more xen updates from Juergen Gross:

- a patch to fix a build warning

- a cleanup of no longer needed code in the Xen event handling

- a small series for the Xen grant driver avoiding high order
   allocations and replacing an insane global limit by a per-call one

- a small series fixing Xen frontend/backend module referencing

* tag 'for-linus-5.5b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen-blkback: allow module to be cleanly unloaded
  xen/xenbus: reference count registered modules
  xen/gntdev: switch from kcalloc() to kvcalloc()
  xen/gntdev: replace global limit of mapped pages by limit per call
  xen/gntdev: remove redundant non-zero check on ret
  xen/events: remove event handling recursion detection

Merge branch 'akpm' (patches from Andrew)

Merge misc Kconfig updates from Andrew Morton:
"A number of changes to Kconfig files under lib/ from Changbin Du and
  Krzysztof Kozlowski"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  lib/: fix Kconfig indentation
  kernel-hacking: move DEBUG_FS to 'Generic Kernel Debugging Instruments'
  kernel-hacking: move DEBUG_BUGVERBOSE to 'printk and dmesg options'
  kernel-hacking: create a submenu for scheduler debugging options
  kernel-hacking: move SCHED_STACK_END_CHECK after DEBUG_STACK_USAGE
  kernel-hacking: move Oops into 'Lockups and Hangs'
  kernel-hacking: move kernel testing and coverage options to same submenu
  kernel-hacking: group kernel data structures debugging together
  kernel-hacking: create submenu for arch special debugging options
  kernel-hacking: group sysrq/kgdb/ubsan into 'Generic Kernel Debugging Instruments'

r8169: fix rtl_hw_jumbo_disable for RTL8168evl

In referenced fix we removed the RTL8168e-specific jumbo config for
RTL8168evl in rtl_hw_jumbo_enable(). We have to do the same in
rtl_hw_jumbo_disable().

v2: fix referenced commit id

Fixes: 14012c9f3bb9 ("r8169: fix jumbo configuration for RTL8168evl")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pipe: don't use 'pipe_wait() for basic pipe IO

pipe_wait() may be simple, but since it relies on the pipe lock, it
means that we have to do the wakeup while holding the lock. That's
unfortunate, because the very first thing the waked entity will want to
do is to get the pipe lock for itself.

So get rid of the pipe_wait() usage by simply releasing the pipe lock,
doing the wakeup (if required) and then using wait_event_interruptible()
to wait on the right condition instead.

wait_event_interruptible() handles races on its own by comparing the
wakeup condition before and after adding itself to the wait queue, so
you can use an optimistic unlocked condition for it.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

NTB: Add Hygon Device ID

Signed-off-by: Jiasen Lin <linjiasen@hygon.cn>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

pipe: remove 'waiting_writers' merging logic

This code is ancient, and goes back to when we only had a single page
for the pipe buffers. The exact history is hidden in the mists of time
(ie "before git", and in fact predates the BK repository too).

At that long-ago point in time, it actually helped to try to merge big
back-and-forth pipe reads and writes, and not limit pipe reads to the
single pipe buffer in length just because that was all we had at a time.

However, since then we've expanded the pipe buffers to multiple pages,
and this logic really doesn't seem to make sense. And a lot of it is
somewhat questionable (ie "hmm, the user asked for a non-blocking read,
but we see that there's a writer pending, so let's wait anyway to get
the extra data that the writer will have").

But more importantly, it makes the "go to sleep" logic much less
obvious, and considering the wakeup issues we've had, I want to make for
less of those kinds of things.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pipe: fix and clarify pipe read wakeup logic

This is the read side version of the previous commit: it simplifies the
logic to only wake up waiting writers when necessary, and makes sure to
use a synchronous wakeup. This time not so much for GNU make jobserver
reasons (that pipe never fills up), but simply to get the writer going
quickly again.

A bit less verbose commentary this time, if only because I assume that
the write side commentary isn't going to be ignored if you touch this
code.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pipe: fix and clarify pipe write wakeup logic

The pipe rework ends up having been extra painful, partly becaused of
actual bugs with ordering and caching of the pipe state, but also
because of subtle performance issues.

In particular, the pipe rework caused the kernel build to inexplicably
slow down.

The reason turns out to be that the GNU make jobserver (which limits the
parallelism of the build) uses a pipe to implement a "token" system: a
parallel submake will read a character from the pipe to get the job
token before starting a new job, and will write a character back to the
pipe when it is done. The overall job limit is thus easily controlled
by just writing the appropriate number of initial token characters into
the pipe.

But to work well, that really means that the old behavior of write
wakeups being synchronous (WF_SYNC) is very important - when the pipe
writer wakes up a reader, we want the reader to actually get scheduled
immediately. Otherwise you lose the parallelism of the build.

The pipe rework lost that synchronous wakeup on write, and we had
clearly all forgotten the reasons and rules for it.

This rewrites the pipe write wakeup logic to do the required Wsync
wakeups, but also clarifies the logic and avoids extraneous wakeups.

It also ends up addign a number of comments about what oit does and why,
so that we hopefully don't end up forgetting about this next time we
change this code.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()

Use the new tcf_proto_check_kind() helper to make sure user
provided value is well formed.

BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:606 [inline]
BUG: KMSAN: uninit-value in string+0x4be/0x600 lib/vsprintf.c:668
CPU: 0 PID: 12358 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
__msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245
string_nocheck lib/vsprintf.c:606 [inline]
string+0x4be/0x600 lib/vsprintf.c:668
vsnprintf+0x218f/0x3210 lib/vsprintf.c:2510
__request_module+0x2b1/0x11c0 kernel/kmod.c:143
tcf_proto_lookup_ops+0x171/0x700 net/sched/cls_api.c:139
tc_chain_tmplt_add net/sched/cls_api.c:2730 [inline]
tc_ctl_chain+0x1904/0x38a0 net/sched/cls_api.c:2850
rtnetlink_rcv_msg+0x115a/0x1580 net/core/rtnetlink.c:5224
netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5242
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x110f/0x1330 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg net/socket.c:657 [inline]
___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311
__sys_sendmsg net/socket.c:2356 [inline]
__do_sys_sendmsg net/socket.c:2365 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2363
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2363
do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45a649
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f0790795c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000045a649
RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000006
RBP: 000000000075bfc8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f07907966d4
R13: 00000000004c8db5 R14: 00000000004df630 R15: 00000000ffffffff

Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline]
kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132
kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86
slab_alloc_node mm/slub.c:2773 [inline]
__kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381
__kmalloc_reserve net/core/skbuff.c:141 [inline]
__alloc_skb+0x306/0xa10 net/core/skbuff.c:209
alloc_skb include/linux/skbuff.h:1049 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline]
netlink_sendmsg+0x783/0x1330 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg net/socket.c:657 [inline]
___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311
__sys_sendmsg net/socket.c:2356 [inline]
__do_sys_sendmsg net/socket.c:2365 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2363
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2363
do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 6f96c3c6904c ("net_sched: fix backward compatibility for TCA_KIND")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: add missing RX enabling for WoL on RTL8125

RTL8125 also requires to enable RX for WoL.

v2: add missing Fixes tag

Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: accept only packets with the right dst_cid

When we receive a new packet from the guest, we check if the
src_cid is correct, but we forgot to check the dst_cid.

The host should accept only packets where dst_cid is
equal to the host CID.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: dp83867: fix hfs boot in rgmii mode

The commit ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe")
causes regression on TI dra71x-evm and dra72x-evm, where DP83867 PHY is
used in "rgmii-id" mode - the networking stops working.
Unfortunately, it's not enough to just move DT parsing code to .probe() as
it depends on phydev->interface value, which is set to correct value abter
the .probe() is completed and before calling .config_init(). So, RGMII
configuration can't be loaded from DT.

To fix and issue
- move RGMII validation code to .config_init()
- parse RGMII parameters in dp83867_of_init(), but consider them as
optional.

Fixes: ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpsw: fix extra rx interrupt

Now RX interrupt is triggered twice every time, because in
cpsw_rx_interrupt() it is asked first and then disabled. So there will be
pending interrupt always, when RX interrupt is enabled again in NAPI
handler.

Fix it by first disabling IRQ and then do ask.

Fixes: 870915feabdc ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet: protect against too small mtu values.

syzbot was once again able to crash a host by setting a very small mtu
on loopback device.

Let's make inetdev_valid_mtu() available in include/net/ip.h,
and use it in ip_setup_cork(), so that we protect both ip_append_page()
and __ip_append_data()

Also add a READ_ONCE() when the device mtu is read.

Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(),
even if other code paths might write over this field.

Add a big comment in include/linux/netdevice.h about dev->mtu
needing READ_ONCE()/WRITE_ONCE() annotations.

Hopefully we will add the missing ones in followup patches.

[1]

refcount_t: saturated; leaking memory.
WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
panic+0x2e3/0x75c kernel/panic.c:221
__warn.cold+0x2f/0x3e kernel/panic.c:582
report_bug+0x289/0x300 lib/bug.c:195
fixup_bug arch/x86/kernel/traps.c:174 [inline]
fixup_bug arch/x86/kernel/traps.c:169 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267
do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286
invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027
RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89
RSP: 0018:ffff88809689f550 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c
RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1
R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001
R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40
refcount_add include/linux/refcount.h:193 [inline]
skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999
sock_wmalloc+0xf1/0x120 net/core/sock.c:2096
ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383
udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276
inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821
kernel_sendpage+0x92/0xf0 net/socket.c:3794
sock_sendpage+0x8b/0xc0 net/socket.c:936
pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458
splice_from_pipe_feed fs/splice.c:512 [inline]
__splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636
splice_from_pipe+0x108/0x170 fs/splice.c:671
generic_splice_sendpage+0x3c/0x50 fs/splice.c:842
do_splice_from fs/splice.c:861 [inline]
direct_splice_actor+0x123/0x190 fs/splice.c:1035
splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990
do_splice_direct+0x1da/0x2a0 fs/splice.c:1078
do_sendfile+0x597/0xd00 fs/read_write.c:1464
__do_sys_sendfile64 fs/read_write.c:1525 [inline]
__se_sys_sendfile64 fs/read_write.c:1511 [inline]
__x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x441409
Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409
RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005
RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180
R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000
Kernel Offset: disabled
Rebooting in 86400 seconds..

Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gre: refetch erspan header from skb->data after pskb_may_pull()

After pskb_may_pull() we should always refetch the header
pointers from the skb->data in case it got reallocated.

In gre_parse_header(), the erspan header is still fetched
from the 'options' pointer which is fetched before
pskb_may_pull().

Found this during code review of a KMSAN bug report.

Fixes: cb73ee40b1b3 ("net: ip_gre: use erspan key field for tunnel lookup")
Cc: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Acked-by: William Tu <u9012063@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pppoe: remove redundant BUG_ON() check in pppoe_pernet

Passing NULL to pppoe_pernet causes a crash via BUG_ON.
Dereferencing net in net_generici() also has the same effect. This patch
removes the redundant BUG_ON check on the same parameter.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

drm/i915: Avoid calling i915_gem_object_unbind holding object lock

In the extreme case, we may wish to wait on an rcu-barrier to reap stale
vm to purge the last of the object bindings. However, we are not allowed
to use rcu_barrier() beneath the dma_resv (i.e. object) lock and do not
take lightly the prospect of unlocking a mutex deep in the bowels of the
routine. i915_gem_object_unbind() itself does not need the object lock,
and it turns out the callers do not need to the unbind as part of a
locked sequence around set-cache-level, so rearrange the code to avoid
taking the object lock in the callers.

<4> [186.816311] ======================================================
<4> [186.816313] WARNING: possible circular locking dependency detected
<4> [186.816316] 5.4.0-rc8-CI-CI_DRM_7486+ #1 Tainted: G     U
<4> [186.816318] ------------------------------------------------------
<4> [186.816320] perf_pmu/1321 is trying to acquire lock:
<4> [186.816322] ffff88849487c4d8 (&mm->mmap_sem#2){++++}, at: __might_fault+0x39/0x90
<4> [186.816331]
but task is already holding lock:
<4> [186.816333] ffffe8ffffa05008 (&cpuctx_mutex){+.+.}, at: perf_event_ctx_lock_nested+0xa9/0x1b0
<4> [186.816339]
which lock already depends on the new lock.

<4> [186.816341]
the existing dependency chain (in reverse order) is:
<4> [186.816343]
-> #6 (&cpuctx_mutex){+.+.}:
<4> [186.816349]        __mutex_lock+0x9a/0x9d0
<4> [186.816352]        perf_event_init_cpu+0xa4/0x140
<4> [186.816357]        perf_event_init+0x19d/0x1cd
<4> [186.816362]        start_kernel+0x372/0x4f4
<4> [186.816365]        secondary_startup_64+0xa4/0xb0
<4> [186.816381]
-> #5 (pmus_lock){+.+.}:
<4> [186.816385]        __mutex_lock+0x9a/0x9d0
<4> [186.816387]        perf_event_init_cpu+0x6b/0x140
<4> [186.816404]        cpuhp_invoke_callback+0x9b/0x9d0
<4> [186.816406]        _cpu_up+0xa2/0x140
<4> [186.816409]        do_cpu_up+0x61/0xa0
<4> [186.816411]        smp_init+0x57/0x96
<4> [186.816413]        kernel_init_freeable+0xac/0x1c7
<4> [186.816416]        kernel_init+0x5/0x100
<4> [186.816419]        ret_from_fork+0x24/0x50
<4> [186.816421]
-> #4 (cpu_hotplug_lock.rw_sem){++++}:
<4> [186.816424]        cpus_read_lock+0x34/0xd0
<4> [186.816427]        rcu_barrier+0xaa/0x190
<4> [186.816429]        kernel_init+0x21/0x100
<4> [186.816431]        ret_from_fork+0x24/0x50
<4> [186.816433]
-> #3 (rcu_state.barrier_mutex){+.+.}:
<4> [186.816436]        __mutex_lock+0x9a/0x9d0
<4> [186.816438]        rcu_barrier+0x23/0x190
<4> [186.816502]        i915_gem_object_unbind+0x3a6/0x400 [i915]
<4> [186.816537]        i915_gem_object_set_cache_level+0x32/0x90 [i915]
<4> [186.816571]        i915_gem_object_pin_to_display_plane+0x5d/0x160 [i915]
<4> [186.816612]        intel_pin_and_fence_fb_obj+0x9e/0x200 [i915]
<4> [186.816679]        intel_plane_pin_fb+0x3f/0xd0 [i915]
<4> [186.816717]        intel_prepare_plane_fb+0x130/0x520 [i915]
<4> [186.816722]        drm_atomic_helper_prepare_planes+0x85/0x110
<4> [186.816761]        intel_atomic_commit+0xc6/0x350 [i915]
<4> [186.816764]        drm_atomic_helper_update_plane+0xed/0x110
<4> [186.816768]        setplane_internal+0x97/0x190
<4> [186.816770]        drm_mode_setplane+0xcd/0x190
<4> [186.816773]        drm_ioctl_kernel+0xa7/0xf0
<4> [186.816775]        drm_ioctl+0x2e1/0x390
<4> [186.816778]        do_vfs_ioctl+0xa0/0x6f0
<4> [186.816780]        ksys_ioctl+0x35/0x60
<4> [186.816782]        __x64_sys_ioctl+0x11/0x20
<4> [186.816785]        do_syscall_64+0x4f/0x210
<4> [186.816787]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4> [186.816789]
-> #2 (reservation_ww_class_mutex){+.+.}:
<4> [186.816793]        __ww_mutex_lock.constprop.15+0xc3/0x1090
<4> [186.816795]        ww_mutex_lock+0x39/0x70
<4> [186.816798]        dma_resv_lockdep+0x10e/0x1f7
<4> [186.816800]        do_one_initcall+0x58/0x2ff
<4> [186.816802]        kernel_init_freeable+0x137/0x1c7
<4> [186.816804]        kernel_init+0x5/0x100
<4> [186.816806]        ret_from_fork+0x24/0x50
<4> [186.816808]
-> #1 (reservation_ww_class_acquire){+.+.}:
<4> [186.816811]        dma_resv_lockdep+0xec/0x1f7
<4> [186.816813]        do_one_initcall+0x58/0x2ff
<4> [186.816815]        kernel_init_freeable+0x137/0x1c7
<4> [186.816817]        kernel_init+0x5/0x100
<4> [186.816819]        ret_from_fork+0x24/0x50
<4> [186.816820]
-> #0 (&mm->mmap_sem#2){++++}:
<4> [186.816824]        __lock_acquire+0x1328/0x15d0
<4> [186.816826]        lock_acquire+0xa7/0x1c0
<4> [186.816828]        __might_fault+0x63/0x90
<4> [186.816831]        _copy_to_user+0x1e/0x80
<4> [186.816834]        perf_read+0x200/0x2b0
<4> [186.816836]        vfs_read+0x96/0x160
<4> [186.816838]        ksys_read+0x9f/0xe0
<4> [186.816839]        do_syscall_64+0x4f/0x210
<4> [186.816841]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4> [186.816843]
other info that might help us debug this:

<4> [186.816846] Chain exists of:
  &mm->mmap_sem#2 --> pmus_lock --> &cpuctx_mutex

<4> [186.816849]  Possible unsafe locking scenario:

<4> [186.816851]        CPU0                    CPU1
<4> [186.816853]        ----                    ----
<4> [186.816854]   lock(&cpuctx_mutex);
<4> [186.816856]                                lock(pmus_lock);
<4> [186.816858]                                lock(&cpuctx_mutex);
<4> [186.816860]   lock(&mm->mmap_sem#2);
<4> [186.816861]
*** DEADLOCK ***

Closes: https://gitlab.freedesktop.org/drm/intel/issues/728
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206105527.1130413-5-chris@chris-wilson.co.uk

lib/: fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ / /' -i */Kconfig

Link: http://lkml.kernel.org/r/20191120140140.19148-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: move DEBUG_FS to 'Generic Kernel Debugging Instruments'

DEBUG_FS does not belong to 'Compile-time checks and compiler options'.

Link: http://lkml.kernel.org/r/20190909144453.3520-10-changbin.du@gmail.com
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: move DEBUG_BUGVERBOSE to 'printk and dmesg options'

I think DEBUG_BUGVERBOSE is a dmesg option which gives more debug info
to dmesg.

Link: http://lkml.kernel.org/r/20190909144453.3520-9-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: create a submenu for scheduler debugging options

Create a submenu 'Scheduler Debugging' for scheduler debugging options.

Link: http://lkml.kernel.org/r/20190909144453.3520-8-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: move SCHED_STACK_END_CHECK after DEBUG_STACK_USAGE

They are both memory debug options to debug kernel stack issues.

Link: http://lkml.kernel.org/r/20190909144453.3520-7-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: move Oops into 'Lockups and Hangs'

They are similar options so place them together.

Link: http://lkml.kernel.org/r/20190909144453.3520-6-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: move kernel testing and coverage options to same submenu

Move error injection, coverage, testing options to a new top level
submenu 'Kernel Testing and Coverage'. They are all for test purpose.

Link: http://lkml.kernel.org/r/20190909144453.3520-5-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: group kernel data structures debugging together

Group these similar runtime data structures verification options
together.

Link: http://lkml.kernel.org/r/20190909144453.3520-4-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: create submenu for arch special debugging options

The arch special options are a little long, so create a submenu for
them.

Link: http://lkml.kernel.org/r/20190909144453.3520-3-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: group sysrq/kgdb/ubsan into 'Generic Kernel Debugging Instruments'

Patch series "hacking: make 'kernel hacking' menu better structurized", v3.

This series is a trivial improvment for the layout of 'kernel hacking'
configuration menu. Now we have many items in it which makes takes a
little time to look up them since they are not well structurized yet.

Early discussion is here:
https://lkml.org/lkml/2019/9/1/39

This patch (of 9):

Group generic kernel debugging instruments sysrq/kgdb/ubsan together
into a new submenu.

Link: http://lkml.kernel.org/r/20190909144453.3520-2-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pipe: fix poll/select race introduced by the pipe rework

The kernel wait queues have a basic rule to them: you add yourself to
the wait-queue first, and then you check the things that you're going to
wait on. That avoids the races with the event you're waiting for.

The same goes for poll/select logic: the "poll_wait()" goes first, and
then you check the things you're polling for.

Of course, if you use locking, the ordering doesn't matter since the
lock will serialize with anything that changes the state you're looking
at. That's not the case here, though.

So move the poll_wait() first in pipe_poll(), before you start looking
at the pipe state.

Fixes: 8cefc107ca54 ("pipe: Use head and tail pointers for the ring, not cursor and length")
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm/i915/guc: Update uncore access path in flush_ggtt_writes

The preferred way to access the uncore is through the GT structure.
Update the GuC function, flush_ggtt_writes, to use this path.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207010033.24667-1-John.C.Harrison@Intel.com